Job Summary: 

• Quickly respond to operational or technical issues to ensure maximum productivity.
• Troubleshoot and repair equipment breakdowns involving mechanical, electrical, hydraulic, and pneumatic components.
• Optimize machine output and increase the quality of preventative maintenance.
• Tear down equipment and rebuild, replace or repair defective components, motors, gear boxes, clutches, bearings and electrical systems.
• Work closely with production supervisors and production personnel on equipment repairs.
• Fabricate and design machine parts.
• Perform PLC and other low-voltage control changes and make diagnostic checks on production machines.
• Install and repair high voltage and low voltage circuits for production lines and facilities.
• Assist outside contractors with on-site projects and repairs.
• Support and contribute to a healthy and safe work environment by following all workplace regulations, policies, and initiatives, including reporting all first aid injuries, accidents, and workplace hazards.

Skills on Resume: 

• Equipment Troubleshooting (Hard Skills)
• Mechanical Repair (Hard Skills)
• Electrical Repair (Hard Skills)
• Hydraulic Systems (Hard Skills)
• Pneumatic Systems (Hard Skills)
• PLC Diagnostics (Hard Skills)
• Machine Fabrication (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Be responsible for predictive, preventative, corrective, and emergency maintenance on a variety of mechanical and electrical systems to ensure safe, efficient, and continuous plant production.
• Act as the shift point of contact for the department.
• Coordinate maintenance activities with other departments.
• Troubleshoot CNC machine systems in a timely manner.
• Support TPM and CORE initiatives.
• Implement 6S practices to keep the work area clean and orderly.
• Train for, obtain and maintain licenses, operator permits and certifications within the assigned area.
• Carry out tasks not specifically listed, within the scope and skill level of this position in support of department objectives and to develop one’s skills.
• Adhere to CORE guidelines and perform CORE duties.
• Adhere to all environmental, health, and safety (EH&S) guidelines, including the wearing of required personal protective equipment.

Skills on Resume: 

• Predictive Maintenance (Hard Skills)
• Preventative Maintenance (Hard Skills)
• CNC Troubleshooting (Hard Skills)
• Safety Compliance (Hard Skills)
• Shift Leadership (Soft Skills)
• Activity Coordination (Soft Skills)
• 6S Implementation (Hard Skills)
• Team Communication (Soft Skills)

Job Summary: 

• Participate in daily maintenance crossover meetings to prioritize and assign work.
• Perform preventative maintenance.
• Perform test and inspect items per computer-generated schedule on a daily, weekly and monthly basis.
• Repair equipment breakdowns.
• Diagnose and troubleshoot the root cause.
• Perform scheduled maintenance according to scheduled shutdowns.
• Work with schematics and blueprints to troubleshoot systems.
• Respond to building emergencies.
• Work with operators on process improvements and train operators on routine preventative maintenance.
• Support engineering and continuous improvement projects, including trials and installation.
• Maintain good housekeeping in the maintenance department and after completing jobs.
• Work in a safe manner and follow all HS and EP regulations, policies and procedures.

Skills on Resume: 

• Preventative Maintenance (Hard Skills)
• Equipment Repair (Hard Skills)
• Root Cause (Hard Skills)
• Scheduled Maintenance (Hard Skills)
• Blueprint Reading (Hard Skills)
• Process Improvement (Soft Skills)
• Operator Training (Soft Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Support the maintenance team in monthly, quarterly, and preventative maintenance inspections on all mechanical equipment, including automation equipment, conveyor system, cardboard baler, and industrial air compressors.
• Perform general maintenance and repair of building, facilities, equipment, and grounds.
• Perform mechanical skills, including mechanical, electrical, 24V DC to 480V AC systems, pneumatic, hydraulic, troubleshooting, and repair of equipment.
• Safely and efficiently use all applicable manual and power tools.
• Respond to and provide emergency and unscheduled repairs to facility equipment.
• Comply with lockout and tagout procedures.
• Comply with safety regulations and maintain clean and orderly work areas.
• Support and track maintenance schedules and issues.
• Support, organize, and maintain spare parts inventory.
• Assist with janitorial responsibilities throughout the facility.
• Work directly with the director to facilitate safety and security initiatives.
• Operate at heights with a scissor lift, as well as operate forklift, pallet jack, and various manual and power tools.
• Participate in LEAN initiatives.
• Participate in company events.

Skills on Resume: 

• Preventative Maintenance (Hard Skills)
• Equipment Repair (Hard Skills)
• Electrical Systems (Hard Skills)
• Hydraulic Systems (Hard Skills)
• Tool Operation (Hard Skills)
• Safety Compliance (Hard Skills)
• Inventory Management (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Diagnose machine malfunction and determine the need for adjustment or repair. 
• Report any problems to the distribution center manager.
• Disassemble, inspect, and perform routine repairs and rebuild defective parts on all equipment.
• Assemble and test the operating machine to verify the correction of the malfunction.
• Maintain and lubricate machine tools and equipment.
• Clean machines and may paint machines or equipment to prevent corrosion.
• Install or recharge batteries for any battery-powered equipment.
• Perform basic facility maintenance.
• Perform basic electrical tasks associated with, but not limited to, replacing motors, fuses, and switches.
• Troubleshoot and repair material handling equipment, including sorters and conveyors, which includes replacing sensors and motorized rollers.
• Identify problems requiring outside vendors and inform the operations supervisors.
• Maintain spare parts for the material handling equipment, kept up to date and able to replace electrical components for the conveyor, including the PLCs.
• Perform evaluations of system-critical devices such as high-speed sorter diverts, high-speed scanners, wave management scanners, etc.
• Utilize the computerized maintenance management system (CMMS).
• Monitor, report, and document the usage and replacement of equipment and parts.
• Replace defective parts with new parts or repair, or reproduce parts.
• Troubleshoot, repair, and perform preventive maintenance on power lift equipment, including mechanical, electrical, hydraulic, and high-pressure air systems.

Skills on Resume: 

• Machine Diagnostics (Hard Skills)
• Equipment Repair (Hard Skills)
• Routine Maintenance (Hard Skills)
• Electrical Tasks (Hard Skills)
• Conveyor Troubleshooting (Hard Skills)
• Parts Management (Hard Skills)
• System Evaluation (Hard Skills)
• CMMS Utilization (Hard Skills)

Job Summary: 

• Monitor, diagnose, and troubleshoot mechanical and electrical equipment in order to maintain and improve the proper, safe, and efficient functionality of production assets.
• Perform preventive, corrective, predictive, and breakdown maintenance on production and facilities on equipment.
• Use problem-solving tools to identify the root cause of repetitive breakdowns or other losses.
• Address key issues and educate peers on problems and solutions.
• Develop one-point lessons and job aids to instruct line operators in the operation and setup of the production equipment.
• Perform maintenance improvement projects, consisting of scope definition, resource planning, scheduling, implementation, and acceptance, to include coordination of work with vendors and contractors.
• Participate in, lead, and develop initiatives relating to energy conservation, continuous improvement, SMED, and TPM.
• Support production maintenance and engineering in the installation, adjustment, fabrication or modification of machinery by the maintenance manager.
• Improve the safety and efficiency of production equipment.
• Specialize in problem-solving electrical and mechanical issues as they occur on the production equipment.
• Ensure OSHA compliance of assigned machinery and equipment concerning use and maintenance.
• Perform daily clean-up and organization of common maintenance areas, including tools and supplies.
• Maintain excellent team working relationships.
• Observe problems with equipment and alert BUL or the maintenance manager immediately.
• Alert the BUL or maintenance manager immediately if there are any safety concerns or issues.
• Adhere to all GMP requirements.
• Adhere to all safety regulations.

Skills on Resume: 

• Equipment Troubleshooting (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Root Cause (Hard Skills)
• Operator Training (Soft Skills)
• Project Coordination (Soft Skills)
• Continuous Improvement (Hard Skills)
• Safety Compliance (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Inspect and identify equipment or machines in need of repair.
• Troubleshoot issues to determine necessary repairs.
• Plan repair work using the building's blueprints or equipment manual.
• Perform general repairs that do not require a specialized technician.
• Examples may include repairing drywall, painting, and repairing doors and other building fixtures.
• Perform routine maintenance on building systems.
• Clean and assist with upkeep of the facilities.
• Order supplies and materials needed for repairs and maintenance.

Skills on Resume: 

• Equipment Inspection (Hard Skills)
• Issue Troubleshooting (Hard Skills)
• Blueprint Reading (Hard Skills)
• General Repairs (Hard Skills)
• Routine Maintenance (Hard Skills)
• Facility Upkeep (Hard Skills)
• Supply Ordering (Hard Skills)
• Work Planning (Soft Skills)

Job Summary: 

• Ensure compliance with corporate and plant safety standards and with applicable laws and regulations issued by regulatory agencies.
• Install, adjust and repair blow mold, trimmers, palletizers and other related equipment.
• Perform mold, neck tooling changes, pin and other equipment changes.
• Inspect and replace pneumatic and hydraulic hoses.
• Inspect, rebuild and replace valves and pumps.
• Perform preventive maintenance on all related equipment.
• Maintain machines in optimal processing condition.
• Weld, fabricate, and repair various machines.
• Troubleshoot, locate root problems and repair blow mold, baggers and support equipment.
• Operate blow mold or injection machines.
• Communicate with other departments on a frequent basis.

Skills on Resume: 

• Safety Compliance (Hard Skills)
• Equipment Installation (Hard Skills)
• Tooling Changes (Hard Skills)
• Hydraulic Repair (Hard Skills)
• Pump Maintenance (Hard Skills)
• Machine Welding (Hard Skills)
• Problem Troubleshooting (Hard Skills)
• Team Communication (Soft Skills)

Job Summary: 

• Perform mechanical and electronic troubleshooting on a variety of mechanical and electrical equipment throughout the facility.
• Perform duties involving a wide range of preventative maintenance and repair work to a variety of electromechanical devices, machinery, instrumentation, HVAC, fixtures, and furnishings throughout the facility.
• Perform preventative maintenance and calibration of production and facility equipment without supervision.
• Repair electronic and instrument-monitored equipment.
• Troubleshoot, diagnose, and repair machine breakdowns in a prompt, skillful manner.
• Maintain machines to ensure that quality packages are provided.
• Perform diagnostics and repairs to a variety of PLCs and associated programmable devices.
• Determine causes and sources of existing and potential electrical and electronic problems.
• Develop improvements upon existing technology and methods, acting unilaterally with engineering, or with others, and make recommendations for their improvements.
• Monitor and evaluate current or potential problems with resulting action or plan to eliminate the problem.
• Research manuals and drawings, prepare sketches and purchase requisitions for the procurement of replacement parts and supplies.
• Be responsible for maintaining the work area in a safe, clean, and orderly condition according to GMPs.

Skills on Resume: 

• Mechanical Troubleshooting (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Equipment Calibration (Hard Skills)
• Electronic Repair (Hard Skills)
• PLC Diagnostics (Hard Skills)
• Problem Analysis (Hard Skills)
• Technical Improvement (Hard Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Perform work safely and per company safety policies and work instructions.
• Locate sources of problems by observing mechanical devices in operation, listening for problems and using test equipment to diagnose problems.
• Gather material for preventive work orders in a timely manner.
• Maintain equipment, parts, and supply inventories by checking stock in the maintenance department.
• Effectively communicate with value streams and other internal customers to ensure work is produced to meet or exceed expectations and in a timely manner.
• Maintain technical knowledge by attending educational workshops, reviewing technical publications, and establishing personal networks.
• Meet quality, service, cost, and efficiency objectives for each assigned work order.
• Support walk-in work and make repairs to support production requirements.
• Identify problems and make recommendations for solutions.
• Support continuous improvement activities and kaizen events in all departments.

Skills on Resume: 

• Safety Compliance (Hard Skills)
• Problem Diagnosis (Hard Skills)
• Inventory Management (Hard Skills)
• Effective Communication (Soft Skills)
• Technical Knowledge (Hard Skills)
• Quality Focus (Soft Skills)
• Process Improvement (Soft Skills)
• Production Support (Hard Skills)

Job Summary: 

• Overhaul, repair, and adjust differential and hydraulic assemblies.
• Lubricate and perform preventive maintenance on forklift equipment.
• Maintain a maintenance log.
• Perform assigned day-to-day system repairs, emergency and preventive maintenance.
• Complete maintenance and repair records.
• Review assigned work orders.
• Estimate the time and materials needed to complete the repair.
• Order necessary materials and supplies to complete the task.
• Comply with all applicable codes, regulations, governmental agencies and company directives related to DC operations and work safety.

Skills on Resume: 

• Hydraulic Repair (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Maintenance Logging (Hard Skills)
• System Repairs (Hard Skills)
• Record Keeping (Hard Skills)
• Work Estimation (Soft Skills)
• Material Ordering (Hard Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Perform advanced electrical maintenance.
• Perform mechanical maintenance.
• Make general electrical repairs of various machines, including CNC and manual equipment.
• Assist in rigging, moving, and installation of machines and equipment.
• Assist in the inspection, repair, and adjustment of machines and equipment.
• Perform general maintenance on machines and equipment.
• Perform preventive maintenance of all equipment.
• Perform all activities in accordance with safety and lockout and tagout procedures.
• Document all repairs and machine history consistent with the policies of Patriot Machine, Inc.

Skills on Resume: 

• Electrical Maintenance (Hard Skills)
• Mechanical Maintenance (Hard Skills)
• Machine Repair (Hard Skills)
• Equipment Installation (Hard Skills)
• Equipment Inspection (Hard Skills)
• General Maintenance (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Completes projects with minimal guidance, showing a proactive attitude to design and installations.
• Troubleshot mechanical devices in operation. 
• Dismantles and examines devices to gain access to and remove defective parts. 
• Adjusts functional parts of devices and control instruments, repairs or replaces defective parts.
• Troubleshot and repaired input/output devices using PLC systems.
• Troubleshoots, completes, designs, upgrades and installs electrical equipment, circuits and systems.
• Troubleshoots, repairs/replaces electrical components at the component level.
• Sets up and operates shop machinery such as lathe, drill press, grinders, band saws, cutting torch, welder, etc. 
• Uses hand tools and pneumatic tools to modify or repair parts and equipment.
• Installs new or repairs/modifies hydraulic and pneumatic equipment
• Improves reliability and uptime of all equipment. 
• Takes a proactive approach to equipment issues with a preventive maintenance mentality.
• Operates forklift and hydraulic working platform.
• Research supplies, parts and machines needed to complete work orders.
• Assists in organizing and maintaining an accurate inventory of parts.
• Performs and documents work orders and preventative maintenance tasks. 
• Contributes to the upkeep and updating of required paperwork such as records, maintenance logs, documents, manuals, drawings, PM logs, etc.
• Follows applicable ISO, Safety, Health and Environmental rules and guidelines while performing any procedure.
• Maintains departmental housekeeping standards.

Skills on Resume: 

• Mechanical Troubleshooting (Hard Skills)
• PLC Repair (Hard Skills)
• Electrical Systems (Hard Skills)
• Machine Operation (Hard Skills)
• Hydraulic Repair (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Inventory Management (Hard Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Provide support to machine repair technicians.
• Perform routine maintenance inspections and repairs to injection molding machines, robots, and auxiliary equipment.
• Perform preventative maintenance tasks that include lubrication, inspection, analysis, and repair of equipment as scheduled.
• Perform weekly, monthly, and annual preventive maintenance inspections.
• Document PMs using the required process and documents.
• Evaluate completed work prior to release and seek supervisor approval.
• Notify supervisor of potentially dangerous equipment.
• Perform housekeeping duties and maintain facilities, including cleaning, organizing, and disposal of grease and fluids, etc.
• Ensure proper handling, storage and disposal of hazardous and regulated wastes, including used oil and aerosol can waste.

Skills on Resume: 

• Maintenance Support (Hard Skills)
• Injection Repair (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Work Documentation (Hard Skills)
• Quality Evaluation (Soft Skills)
• Hazard Reporting (Soft Skills)
• Facility Housekeeping (Hard Skills)
• Waste Handling (Hard Skills)

Job Summary: 

• Perform repairs and preventive maintenance on conveyor systems.
• Perform repairs and preventive maintenance on all lift trucks and powered equipment, dock plates, truck restraints, and overhead doors.
• Perform repairs and modifications to facility electrical and lighting systems.
• Perform repairs and preventive maintenance to the HVAC system, including office and warehouse units.
• Utilize parts manuals and the computerized maintenance management system to identify required parts.
• Complete interior finish work, including painting and drywall work.
• Perform repairs to the plumbing system, including restroom fixtures.
• Perform general building and grounds maintenance and housekeeping.

Skills on Resume: 

• Conveyor Maintenance (Hard Skills)
• Equipment Repair (Hard Skills)
• Electrical Systems (Hard Skills)
• HVAC Maintenance (Hard Skills)
• CMMS Utilization (Hard Skills)
• Finish Work (Hard Skills)
• Plumbing Repair (Hard Skills)
• Building Maintenance (Hard Skills)

Job Summary: 

• Perform corrective, preventative and predictive maintenance on production-related equipment.
• Ensure proper and safe operation of all production machine systems.
• Communicate and work with the plant engineering manager, maintenance supervisors, production supervisors, scheduler, and all other production staff.
• Troubleshoot, maintain, and install mechanical, electrical (PLCs), pneumatic, and hydraulic systems to provide the maximum percentage of uptime possible.
• Troubleshoot and fix manufacturing equipment such as wrappers, mixers, and motors at the plant.
• Install control and distribution apparatus such as switches, relays, and circuit-breaker panels.
• Connect power cables to equipment, such as an electric range or motor, and install grounding leads.
• Monitor and ensure that the equipment is in excellent condition for operation.
• Perform preventive and corrective maintenance on the equipment.
• Install power on the new manufacturing equipment.
• Comply with environmental and food safety standards as outlined in plant policies and programs within department responsibilities.

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• Safety Compliance (Hard Skills)
• Team Communication (Soft Skills)
• System Troubleshooting (Hard Skills)
• Equipment Repair (Hard Skills)
• Control Installation (Hard Skills)
• Power Connection (Hard Skills)
• Equipment Monitoring (Hard Skills)

Job Summary: 

• Maintain and perform daily maintenance and preventive maintenance on cranes, conveyors, power industrial vehicles and building facilities.
• Maintain the battery room and chargers to include charging and changing batteries for material handling equipment.
• Observe mechanical devices in operation, perform diagnostic routines and listen to their sounds to locate causes of trouble.
• Maintain equipment rooms in a neat and orderly fashion.
• Follow through and complete all work orders.
• Maintain appropriate levels of material handling equipment maintenance supplies.
• Track and complete all preventative maintenance utilizing the Maximo database software application.
• Ensure compliance with OSHA and other federal, state, and local guidelines.
• Adhere to the mission and cornerstone values and applicable practices of the organization.
• Maintain knowledge of current trends and developments in the field by reading appropriate books, journals and other literature and attending related conferences, seminars, etc.
• Maintain peer relationships in the field to share issues and ideas.

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• Battery Maintenance (Hard Skills)
• Problem Diagnosis (Hard Skills)
• Work Order (Hard Skills)
• Supply Management (Hard Skills)
• CMMS Utilization (Hard Skills)
• Safety Compliance (Hard Skills)
• Peer Collaboration (Soft Skills)

Job Summary: 

• Keep equipment available for use by inspecting, testing, and repairing non-functioning equipment.
• Complete preventative maintenance such as fluid changes, filter changes, and firefighting plant problems.
• Maintain equipment in functional condition by listening to operator complaints, conducting inspections, repairing equipment failures, repairing mechanical and electrical systems malfunctions, replacing parts and components, and repairing equipment damage.
• Verify equipment serviceability by conducting test drives, adjusting controls and systems.
• Comply with federal and state hazardous material handling and safety requirements.
• Maintain equipment appearance by cleaning, washing, and painting.
• Maintain equipment records by recording service and repairs.
• Keep shop equipment operating by following operating instructions, troubleshooting breakdowns, maintaining supplies, and performing preventative maintenance.
• Contain costs by using warranty and evaluating service and parts options.
• Keep supplies ready by inventorying stock, placing orders, and verifying receipt.

Skills on Resume: 

• Equipment Inspection (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Equipment Repair (Hard Skills)
• System Testing (Hard Skills)
• Safety Compliance (Hard Skills)
• Record Keeping (Hard Skills)
• Cost Control (Soft Skills)
• Inventory Management (Hard Skills)

Job Summary: 

• Dismantle machines and equipment to gain access to problem areas.
• Inspect and measure parts to detect wear, misalignment or other problems.
• Remove and replace worn or broken parts.
• Re-align and adjust components such as spindles and clutches.
• Locate damaged air and hydraulic pipes on the machine and measure, cut, thread and install new pipe.
• Install power supply wires to machines and equipment and connect cables and wires between machines and equipment.
• Diagnose malfunctioning apparatus such as transformers, motors, and lighting fixtures and replace damaged or broken wires and cables.
• Diagnose and replace faulty electrical components of machines such as relays, switches, and motors.
• Modify the computer-controlled motion of the robot.
• Assist with modifying sketches of CAD drawings of machine components.

Skills on Resume: 

• Machine Dismantling (Hard Skills)
• Part Inspection (Hard Skills)
• Component Replacement (Hard Skills)
• System Alignment (Hard Skills)
• Pipe Installation (Hard Skills)
• Electrical Wiring (Hard Skills)
• Component Diagnostics (Hard Skills)
• CAD Modification (Hard Skills)

Job Summary: 

• Ensure health and safety is the number one goal by following policies, processes, and acting in a safe manner at all times.
• Perform preventive, predictive, and corrective maintenance on equipment and plant facilities.
• Provide emergency and unscheduled repairs of equipment.
• Perform simple machinist duties.
• Perform maintenance skills, including mechanical, pneumatic, hydraulic, troubleshooting and repair of equipment.
• Read and interpret equipment manuals and drawings.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Detect faulty operations, defective material and report those and any unusual situations to proper supervision.

Skills on Resume: 

• Safety Compliance (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Emergency Repair (Hard Skills)
• Machinist Duties (Hard Skills)
• Equipment Troubleshooting (Hard Skills)
• Manual Reading (Hard Skills)
• Problem Diagnosis (Hard Skills)
• Issue Reporting (Soft Skills)

Job Summary: 

• Install, repair, and perform preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems.
• Troubleshoot electrical issues.
• Respond to daily maintenance requests in a timely fashion to minimize equipment downtime.
• Provide emergency and unscheduled repairs of production equipment.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Look for opportunities to continually improve maintenance processes.
• Work with all plant personnel in a cooperative and professional manner.
• Strictly adhere to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry.
• Ensure work is performed safely and efficiently.
• Maintain technical knowledge by attending educational workshops and reviewing technical publications.
• Remain current on equipment and repair procedures and best practices.
• Study blueprints and manufacturers’ manuals to determine the correct operation of machinery.
• Be proficient in reading electrical schematics.
• Maintain accurate and timely records of maintenance performed.
• Follow written and verbal instructions and perform other tasks by supervision.
• Comply with all federal, state and local laws.

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Electrical Troubleshooting (Hard Skills)
• Emergency Repair (Hard Skills)
• Process Improvement (Soft Skills)
• Team Collaboration (Soft Skills)
• Safety Compliance (Hard Skills)
• Blueprint Reading (Hard Skills)
• Record Keeping (Hard Skills)

Job Summary: 

• Program, troubleshoot, repair, and maintain presses to include 1000-ton up to 3000-ton presses.
• Weld and fabricate fixtures, equipment repair, guarding, and plumbing using electric and electronic schematics, hydraulic and pneumatic diagrams, and mechanical blueprints to rebuild and repair equipment.
• Perform scheduled preventative and predictive maintenance on presses and other plant equipment.
• Operate material handling equipment, including forklifts, cranes, and hoists.
• Diagnose, troubleshoot, update, and repair malfunctioning plant equipment as well as plant building repairs within capabilities.
• Complete requisitions to facilitate the ordering of parts and maintenance supplies as used and needed.
• Adhere to all plant safety requirements to ensure compliance with OSHA regulations.
• Participate as a leader on the maintenance team for major repairs, as a team member in the resolution of manufacturing problems, troubleshooting, and productivity improvement analysis, and as a task force member on activities such as peer selection, job evaluation, and equipment selection.

Skills on Resume: 

• Press Maintenance (Hard Skills)
• Welding Fabrication (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Material Handling (Hard Skills)
• Rigging Operations (Hard Skills)
• Parts Requisition (Hard Skills)
• Safety Compliance (Hard Skills)
• Team Leadership (Soft Skills)

Job Summary: 

• Perform diverse duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems.
• Provide emergency and unscheduled repairs using maintenance skills, including but not limited to mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production equipment.
• Diagnose problems, replace or repair parts, detect faulty operations or defective material and report those situations to management.
• Perform machinist duties and responsibilities.
• Schedule and perform preventative maintenance of machines, equipment and plant facilities, keeping management and operators aware of preventative maintenance schedules.
• Read and interpret equipment manuals and work orders to perform required maintenance and service.
• Assist with upkeep of equipment records, instruction manuals and parts lists.
• Use a variety of hand and power tools, electric meters and material handling equipment.
• Comply with all safety regulations such as hot work permit, lockout and tagout, electrical safety, personal protective equipment and confined space.
• Maintain a clean and safe work environment.

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Emergency Repair (Hard Skills)
• Problem Diagnosis (Hard Skills)
• Machinist Duties (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Manual Reading (Hard Skills)
• Tool Operation (Hard Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Troubleshoot electrical systems that use up to 480-volt 3-phase voltage.
• Use deductive reasoning to diagnose electrical and mechanical processes in converting, packaging, conveying, and palletizing equipment.
• Diagnose problems with 3-phase electric motors and motor starters.
• Diagnose hard-wired control circuits, CAT III safety circuits, and programmable logic controllers (PLC).
• Safely troubleshoot circuits using various ladder logic software, electrical schematics, and various test equipment.
• Troubleshoot, repair, and replace mechanical equipment to include motors, bearings, pumps, gearboxes, conveyor components, hydraulic components, pneumatic components, and belt drive systems.
• Adhere to all plant safety and environmental guidelines, policies, and procedures and actively participate in the safety program.
• Support the facility’s maintenance efforts and strive to further a reliability vision of creating an environment where equipment operates, runs predictably, and never fails.
• Perform tasks such as lifting, walking, climbing, stooping, standing, pushing and pulling for up to twelve (12) hours a day.
• Communicate with all levels of an organization via reports, email, verbally, and in small and large group or team environments.
• Use comprehension reading skills to carry out complex written instructions.
• Use basic hand tools and precision maintenance techniques.

Skills on Resume: 

• Electrical Troubleshooting (Hard Skills)
• Process Diagnosis (Hard Skills)
• Motor Diagnostics (Hard Skills)
• PLC Troubleshooting (Hard Skills)
• Mechanical Repair (Hard Skills)
• Safety Compliance (Hard Skills)
• Team Communication (Soft Skills)
• Tool Operation (Hard Skills)

Job Summary: 

• Perform general facility and manufacturing equipment maintenance and repairs of plant machinery and equipment, such as mixers, conveyors, compressor systems, shakers, packaging and labeling systems, pumps, roll-up doors and other repairs.
• Enhance equipment performance by installing modifications, fabricating and modifying new and existing equipment while maintaining the integrity of safety and warranty.
• Support the organization’s compliance with policies and procedures for internal and external regulatory requirements set by EPA and OSHA.
• Execute the set-up, inspection and break down of the various filling lines.
• Respond to maintenance requests.
• Perform basic electrical, plumbing, and other miscellaneous facility tasks.
• Perform routine maintenance of facilities to prevent mechanical failure.
• Promote an incident-free workplace by complying with safety policies and procedures and participating in company safety trainings.

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Equipment Modification (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Line Setup (Hard Skills)
• Request Response (Soft Skills)
• Facility Repairs (Hard Skills)
• Routine Maintenance (Hard Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Perform maintenance mechanic assignments on plant equipment and facilities.
• Collect data for preventative and predictive plant maintenance projects.
• Perform millwright assignments such as bearing replacement, alignment of equipment, and inspection and repair of power transmission according to plant standards.
• Perform welding and cutting assignments such as fabrication of plant equipment and structures and repair of worn process equipment according to plant standards.
• Inspect lubrication for mechanical equipment, record data for running equipment, take lab samples, drain oil and change oil and filters on all equipment oil reservoirs.
• Perform pipefitter assignments to install, maintain and inspect existing and future piping structures on all types of piping systems.
• Operate mobile equipment to assist with completing maintenance assigned duties.
• Perform plumbing inspection and repair on plant equipment and facilities.
• Adhere to all CEMEX, OSHA, and MSHA rules and regulations at all times and wear proper safety equipment while on plant grounds.
• Meet or exceed company safety standards.

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Data Collection (Hard Skills)
• Millwright Skills (Hard Skills)
• Welding Fabrication (Hard Skills)
• Lubrication Inspection (Hard Skills)
• Pipefitting Skills (Hard Skills)
• Plumbing Repair (Hard Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Maintain, troubleshoot, repair and improve hydraulic, pneumatic, electrical and mechanical equipment.
• Diagnose and troubleshoot VFDs and servo drives, setting and adjusting parameters and replacing such devices.
• Perform preventive maintenance.
• Complete shop records and use reporting systems following established procedures.
• Provide quick response to maintenance requests and calls from maintenance leadership and manufacturing operations teams.
• Follow safe work methods and procedures to avoid injury to self and co-workers or damage to company property, including the use of all required personal protective equipment, following safety precautions (e.g., LOTO), ensuring machine guards, etc.
• Follow proper housekeeping standards to ensure clean and organized maintenance work areas.
• Operate motorized equipment, including but not limited to scissor lifts, JLGs, fork trucks, etc.
• Use a wide range of powered tools and hand tools and vibratory tools and equipment.

Skills on Resume: 

• Equipment Troubleshooting (Hard Skills)
• VFD Diagnostics (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Record Keeping (Hard Skills)
• Request Response (Soft Skills)
• Safety Compliance (Hard Skills)
• Housekeeping Standards (Soft Skills)
• Tool Operation (Hard Skills)

Job Summary: 

• Design and build production machinery and equipment.
• Perform installation and repair of machinery and equipment, including mechanical, electrical and water and air piping.
• Continuously make improvements to production machines.
• Generate preventative maintenance schedules for all equipment, perform PMs and train operators how to perform preventative maintenance.
• Perform building maintenance (electrical, plumbing, etc.), including sprinkler system, air compressing and refrigeration equipment and freight elevators.
• Install electrical, compressed air and plumbing building improvements.
• Schedule, manage, and supervise all contracted maintenance work.
• Operate machines, including lathes, milling machines and drill presses.
• Perform proper procedure for handling, packaging, storing, transporting and disposing of all hazardous wastes generated by the chrome plating process.
• Inspect, maintain and document all hazardous materials on premises.

Skills on Resume: 

• Machine Design (Hard Skills)
• Equipment Installation (Hard Skills)
• Process Improvement (Soft Skills)
• Preventive Maintenance (Hard Skills)
• Building Maintenance (Hard Skills)
• Contract Supervision (Soft Skills)
• Machine Operation (Hard Skills)
• Hazard Management (Hard Skills)

Job Summary: 

• Serve as packaging maintenance, and perform skilled and unskilled tasks in the maintenance and repair of buildings, grounds, equipment and machinery on a scheduled basis or in response to work orders or emergency calls to determine the nature and extent of maintenance, repairs or alterations required.
• Make recommendations to the packaging engineer or other supervisor as to the need for, timing and extent of maintenance and repairs.
• Perform needed repairs or maintenance in accordance with blueprints, manuals, building codes, or other accepted quality work practices.
• Dismantle machines or equipment to gain access to defective parts.
• Clean and lubricate equipment.
• Utilize email, work order system, and other means to communicate effectively with co-workers and management.
• Assist in training production personnel or other maintenance personnel.
• Participate in troubleshooting equipment such as carton former, case erector, carton closer, case packer, tape and glue machines, palletizing and pick and place robots.

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Repair Recommendations (Soft Skills)
• Blueprint Reading (Hard Skills)
• Machine Dismantling (Hard Skills)
• Equipment Lubrication (Hard Skills)
• Effective Communication (Soft Skills)
• Personnel Training (Soft Skills)
• Equipment Troubleshooting (Hard Skills)

Job Summary: 

• Work independently and with little to no supervision to troubleshoot all conveyor material handling systems, electrical, plumbing, mechanical, and fire protection systems.
• Execute departmental and operational goals.
• Assist in the design, layout, and reconfiguration of existing systems.
• Utilize the CMMS system to create and maintain the work schedule and workflow.
• Work regularly on aerial platform lifts, boom and snorkel lift, and powered industrial trucks (reach, order picker, stand up, pallet runners, stock chaser, etc.).
• Mentor team members by motivating, providing guidance and direct feedback to help them achieve their goals and improve individual performance.
• Develop and maintain good working relationships across all levels of the organization.
• Be responsible for keeping and maintaining tools, supplies, and a clean, organized work area.

Skills on Resume: 

• System Troubleshooting (Hard Skills)
• Goal Execution (Soft Skills)
• System Design (Hard Skills)
• CMMS Utilization (Hard Skills)
• Lift Operation (Hard Skills)
• Team Mentoring (Soft Skills)
• Relationship Building (Soft Skills)
• Work Organization (Soft Skills)

Job Summary: 

• Participate in all safety programs such as LOTO, fall protection, and energized equipment safety.
• Read and comprehend technical manuals and instructions.
• Ensure operation of production and support equipment by completing preventive maintenance requirements on motors, gearboxes, pumps, piping systems, pneumatics, hydraulics, conveyor systems, and packaging machines. 
• Follow diagrams, sketches, operations manuals, manufacturer's instructions, engineering specifications, troubleshoot malfunctions and frequency-driven PMs using the CMMS program.
• Troubleshoot mechanical and electrical equipment problems.
• Develop and maintain schedules for preventive and corrective maintenance repairs on equipment using the CMMS program.
• Locate sources of problems by observing mechanical devices in operation, listening for problems and using precision measuring and testing instruments.
• Remove defective parts by dismantling devices, using hoists, cranes, and hand and power tools, and examining the form and texture of parts.
• Determine changes in dimensional requirements of parts by inspecting used parts using rules, calipers, micrometers, and other measuring instruments.
• Adjust functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges.
• Control downtime by informing production of routine preventive maintenance techniques and monitoring compliance.
• Fabricate repair parts by using maintenance shop instrumentation and equipment.
• Maintain equipment, parts, and supplies inventory by checking stock to determine inventory level. 
• Anticipate needed equipment, parts and supplies to complete work orders in a timely manner.
• Conserve maintenance resources by using equipment and supplies to accomplish job results.
• Provide mechanical maintenance information by answering questions and requests.
• Prepare mechanical maintenance reports by collecting, analyzing, and summarizing information and trends.
• Maintain technical knowledge by attending educational workshops, reviewing technical publications, and establishing personal networks.
• Maintain continuity among work teams by documenting and communicating actions, irregularities, and continuing needs utilizing the CMMS program.
• Maintain a safe and clean working environment by complying with procedures, rules, 5S processes and regulations.
• Contribute to team effort by accomplishing related results.

Skills on Resume: 

• Safety Compliance (Hard Skills)
• Manual Reading (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Equipment Troubleshooting (Hard Skills)
• CMMS Utilization (Hard Skills)
• Precision Measurement (Hard Skills)
• Inventory Management (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Inspect equipment for defects such as wear, misalignment, insufficient lubrication, etc.
• Determine the best way of making repairs to minimize the interruption of production.
• Advise when immediate shutdown of equipment is necessary to prevent damage or when temporary continued operation will have no harmful effect.
• Dismantle, clean, repair, replace, install, maintain, assemble, and lubricate mechanical equipment.
• Erect scaffold, hoists, and chain falls.
• Make either temporary or permanent repairs.
• Assemble and align gears, bearings, and shafts, involving piping, valves, and fittings.
• Fabricate, install, patch, insulate sheet metal ducts and chutes, adjust dampers, and install structural members of plate work.
• Operate simple machine tools such as drill press, pipe threading machine, power saw, etc.
• Troubleshoot issues with timers, relays, motor starters, starters, and other electrical issues.
• Adjust equipment, dampers, valves, etc., for proper operating characteristics.
• Change, set up, and adjust equipment of a wide variety.
• Maintain a record of adjustments, repairs and spare parts used.
• Lay out and fabricate structural members, plates, pressure vessels and miscellaneous equipment.
• Perform basic maintenance on mobile equipment.
• Perform all miscellaneous mechanical work required to maintain the plant.

Skills on Resume: 

• Equipment Inspection (Hard Skills)
• Repair Planning (Soft Skills)
• Mechanical Maintenance (Hard Skills)
• Scaffold Operation (Hard Skills)
• Gear Alignment (Hard Skills)
• Metal Fabrication (Hard Skills)
• Electrical Troubleshooting (Hard Skills)
• Record Keeping (Hard Skills)

Job Summary: 

• Assist with the completion of preventative maintenance.
• Assist with equipment repair under the supervision and direction of a maintenance technician.
• Assist with recordkeeping of maintenance performed.
• Assist with plumbing repair, replacement, and assembly.
• Maintain facility grounds, which may include cleaning the yard, trimming shrubbery, raking, planting, and weeding.
• Report all hazardous conditions to the supervisor, referring to the shift supervisor if the maintenance supervisor is not available.
• Exhibit strong commitment to learning and following instructions and directions from maintenance technicians and the maintenance manager.
• Assist in the testing of facility systems, including but not limited to fire alarms, exit door alarms, and emergency and exit lighting.

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• Equipment Repair (Hard Skills)
• Record Keeping (Hard Skills)
• Plumbing Assistance (Hard Skills)
• Grounds Maintenance (Hard Skills)
• Hazard Reporting (Soft Skills)
• Instruction Following (Soft Skills)
• System Testing (Hard Skills)

Job Summary: 

• Ensure the operation of machinery and mechanical equipment by completing preventive maintenance.
• Understand motors, pneumatic tools, conveyor systems, and production machines.
• Follow diagrams, operations manuals, manufacturer's instructions, and engineering specifications.
• Troubleshoot machine malfunctions to reduce downtime.
• Locate sources of problems by observing mechanical devices in operation and listening for problems.
• Be proficient in using precision measuring and testing instruments.
• Replace defective parts by dismantling devices, using hoists, cranes, and hand and power tools.
• Determine changes in the dimensional requirements of parts.
• Inspect used parts using rules, calipers, micrometers, and other measuring instruments.
• Adjust functional parts of devices and control instruments.
• Use hand tools, levels, plumb bobs, and straightedges.
• Fabricate repair parts by using machine shop instrumentation and equipment.
• Maintain equipment and supplies inventories by checking stock to determine inventory needs.
• Anticipate needed equipment, parts, and supplies.
• Place and expedite orders, verifying receipts using all CMMS.
• Maintain continuity among work teams.
• Document and communicate actions, irregularities, and continuing needs.
• Maintain a safe and clean working environment.
• Comply with safety procedures, rules, and regulations.

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• Machine Troubleshooting (Hard Skills)
• Problem Detection (Hard Skills)
• Precision Measurement (Hard Skills)
• Part Replacement (Hard Skills)
• Repair Fabrication (Hard Skills)
• Inventory Management (Hard Skills)
• Team Communication (Soft Skills)

Job Summary: 

• Ensure operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and carwash equipment, following diagrams, sketches, operations manuals, manufacturer’s instructions, and engineering specifications, and troubleshooting malfunctions.
• Remove defective parts by dismantling devices, using hoists, cranes, and hand and power tools, and examining the form and texture of parts.
• Adjust functional parts of devices and control instruments by using hand tools, levels, and straightedges.
• Control downtime by informing owners and workers of routine preventive maintenance techniques.
• Fabricate repair parts by using hand tools and equipment.
• Maintain equipment, parts, and supplies inventories by checking stock to determine inventory level, anticipating needed equipment, parts, and supplies, placing and expediting orders, and verifying receipt.
• Conserve maintenance resources by using equipment and supplies to accomplish job results.
• Provide mechanical maintenance information by answering questions and requests.
• Prepare mechanical maintenance reports by collecting, analyzing, and summarizing information and trends.
• Maintain technical knowledge by attending online educational workshops, reviewing technical publications, and establishing personal networks.
• Maintain continuity among work teams by documenting and communicating actions, irregularities, and continuing needs.
• Maintain a safe and clean working environment by complying with procedures, rules, and regulations.
• Contribute to team effort by accomplishing related results.

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• Part Replacement (Hard Skills)
• Equipment Adjustment (Hard Skills)
• Downtime Control (Soft Skills)
• Repair Fabrication (Hard Skills)
• Inventory Management (Hard Skills)
• Report Preparation (Hard Skills)
• Team Communication (Soft Skills)

Job Summary: 

• Organize and facilitate maintenance on all production and facility equipment with emphasis on equipment uptime and to resolve quality and production-related issues in the spirit of continuous improvement, including electrical, pneumatic, hydraulic and mechanical troubleshooting.
• Read and interpret machine electrical and mechanical drawings.
• Troubleshoot programmable controllers, electronics, circuit analysis, mechanics, hydraulics, and pneumatics.
• Use electrical test equipment for repair and troubleshooting.
• Repair and rebuild electrical and mechanical components.
• Perform installation, modification and fabrication of equipment and systems to meet production needs and schedules.
• Communicate clearly maintenance situations from one shift to another, including the maintenance team leader and the maintenance manager.
• Maintain plant-wide accountabilities for operational aspects, including progress toward quality and production goals.
• Participate in continuous improvement in safety, quality and housekeeping.

Skills on Resume: 

• Equipment Troubleshooting (Hard Skills)
• Drawing Interpretation (Hard Skills)
• PLC Troubleshooting (Hard Skills)
• Test Equipment (Hard Skills)
• Component Repair (Hard Skills)
• Equipment Installation (Hard Skills)
• Shift Communication (Soft Skills)
• Continuous Improvement (Soft Skills)

Job Summary: 

• Diagnose, repair, and maintain production machines and equipment, including PLC, drive systems, NC/CNC equipment, and Fanuc robots and controls.
• Troubleshoot issues, replace or repair parts, and tune/set equipment parameters.
• Perform regular preventive and predictive maintenance on machines and equipment as scheduled.
• Read and interpret ladder logic, electric/electronic schematics, hydraulic and pneumatic diagrams, mechanical blueprints, equipment manuals, and work orders.
• Use these to take action to perform required maintenance, repair and replacement of equipment and sub-systems.
• Repair, modify, and fabricate components using hand and machine tools such as a lathe, band saw, etc.
• Problem-solve machine downtime and make suggestions for improvement.
• Utilize CNC software to effectively troubleshoot equipment.
• Comply with plant safety guidelines, Life Saving Rules, and housekeeping and 5S+ standards.
• Coordinate with and support external maintenance/repair contractors.
• Effectively communicate shift handoff with other maintenance personnel, communicate updates and escalate issues to the supervisor.
• Assist in on-the-job training for new employees and apprentices.
• Assist in maintaining an atmosphere of continuous improvement and team efforts for accomplishing departmental and plant objectives.
• Watch for and report unusual conditions, safety issues, or defective material.
• Work as a team member to meet safety, quality and productivity goals and requirements.
• Maintain work area housekeeping and assist in department/team housekeeping and 5S efforts.
• Perform work in a manner that supports Eaton’s Quality systems (QS, 9000, TS 16949, CQI-9), and Environmental system (ISO 14000).
• Work a reasonable amount of overtime, including weekends and holidays as scheduled.

Skills on Resume: 

• Machine Repair (Hard Skills)
• PLC Troubleshooting (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Blueprint Reading (Hard Skills)
• Component Fabrication (Hard Skills)
• CNC Software (Hard Skills)
• Shift Communication (Soft Skills)
• Continuous Improvement (Soft Skills)

Job Summary: 

• Perform diagnosis, testing, disassembly, inspection, repair, and reassembly of plant equipment or components such as hydraulic and pneumatic cylinders, hydraulic shears, and warehouse cranes.
• Performs skilled troubleshooting and servicing of pneumatic and hydraulic components.
• Performs proper replacement and/or adjustment of mechanical clutches, drive trains, etc.
• Repairs worn parts, straightens, and fabricates.
• Use welding and cutting tools.
• Performs repairs on plant equipment
• Records labor and material used on each repair made.
• Properly uses lift equipment (cranes, booms, Man lifts, etc.)
• Occasionally will be called during irregular hours to handle issues with little or no supervision.
• Reports all abnormal conditions and safety hazards to the maintenance manager.
• Performs housekeeping and other routine tasks.
• Work safely, and follow safe working practices, including lock-out/tag-out procedures and other safety procedures as they arise.
• Installs and repairs electrical apparatus, such as wiring and electrical and electronic components of machinery and equipment.

Skills on Resume: 

• Equipment Diagnosis (Hard Skills)
• Hydraulic Repair (Hard Skills)
• Mechanical Adjustment (Hard Skills)
• Part Fabrication (Hard Skills)
• Welding Cutting (Hard Skills)
• Lift Operation (Hard Skills)
• Safety Compliance (Hard Skills)
• Record Keeping (Hard Skills)

Job Summary: 

• Be responsible for a number of functions across the manufacturing floor, including preventative maintenance and repair of manufacturing equipment, troubleshooting and problem solving with equipment, optimizing equipment capabilities, performing root-cause analysis when equipment fails, and participating in new equipment installations and recommending improvements to operations to meet customer demand
• Develops, implements, and maintains a comprehensive preventative maintenance program for electronic and mechanical manufacturing equipment, including lathes, mills, tubular lasers, and hydraulic presses
• Understands and applies electrical, mechanical, hydraulic, and electronic troubleshooting and repair skills to various industrial machines.
• Troubleshoots, repairs, and installs CNCs, hydraulic presses, and other equipment, including robotics and laser systems
• Repairs and schedule through completion
• Works with PLCs, ladder logic, and various schematics
• Leads safe work habits in accordance with OSHA and GEO-specific Health and Safety expectations
• Perform the preventive maintenance, troubleshooting, and repair of Mechanical/Electrical/Hydraulic/Pneumatic/Building Maintenance issues in a timely fashion
• Perform adjustments and/or make corrections on equipment to reach optimum capabilities

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• Equipment Troubleshooting (Hard Skills)
• Root Cause (Hard Skills)
• Equipment Installation (Hard Skills)
• CNC Repair (Hard Skills)
• PLC Troubleshooting (Hard Skills)
• Safety Compliance (Hard Skills)
• Process Optimization (Soft Skills)

Job Summary: 

• Identify and report equipment abnormalities and safety hazards
• Complete record logs, including labor, repairs made, equipment, and use of materials on the computer
• Be responsible for working with small hand tools, including tape measures, micrometers, saws, drills, riveters, and nail guns
• Assist in general plant clean-up and housekeeping
• Communicates problems or needs to departmental supervision
• Communicates and interacts with coworkers in a professional manner
• Follow Environmental, Quality, and Safety Management System procedures and requirements
• Perform general building repairs and maintenance work for plumbing, compressed air, and painting, which requires a fundamental knowledge of the trades involved
• Maintain reporting of inspections, evaluations, and preventive maintenance procedures and communicate all pertinent information regarding equipment operation and maintenance to leadership daily

Skills on Resume: 

• Equipment Inspection (Hard Skills)
• Record Keeping (Hard Skills)
• Tool Handling (Hard Skills)
• Housekeeping Duties (Hard Skills)
• Issue Reporting (Soft Skills)
• Team Communication (Soft Skills)
• Building Repairs (Hard Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Analyzes and repairs all manufacturing equipment and systems
• Understands and performs processes on machines to ensure machine efficiencies
• Completes Preventive Maintenance on factory machinery
• Repairs and provides maintenance of conveyor systems
• Repairs and provides maintenance of pump/vacuum systems
• Promotes safety in the workplace by assuring that all safeguards on equipment are in place and operating properly
• Be responsible for following safety rules and GMP guidelines
• Working from drawings, layouts, and specifications, plan and develop work sequence
• Troubleshoot hydraulics, electrical, pneumatic, and mechanical systems, and machine shop equipment
• Use machine tool manuals, technical documents, internal and vendor resources to research machine issues

Skills on Resume: 

• Equipment Repair (Hard Skills)
• Process Optimization (Soft Skills)
• Preventive Maintenance (Hard Skills)
• Conveyor Maintenance (Hard Skills)
• Pump Systems (Hard Skills)
• Safety Compliance (Hard Skills)
• System Troubleshooting (Hard Skills)
• Technical Research (Hard Skills)

Job Summary: 

• Services, sets up, operates, maintains, adjusts, makes size changeovers, and overhauls high-speed manufacturing machinery, including stamping and forming presses.
• Runs the manufacturing line to maximize production efficiency.
• Inspects to ensure that the product is produced to current standards.
• Diagnose mechanical and quality problems, determine necessary repairs and restore defective equipment to service.
• Effectively directs trainees, helpers, and other assigned employees.
• Prepares and maintains reports and records in relation to production, quality, efficiency and maintenance.
• Performs duties regarding the safety of self and other employees while exercising proper care and protection of company property.
• Be responsible for monitoring and maintaining plant support equipment, Air compressors, Chillers, etc.
• Maintain building equipment (to include HVAC and lighting).
• Maintain equipment logs and history, as well as look up parts in inventory, using the company-specific system.

Skills on Resume: 

• Machine Operation (Hard Skills)
• Production Efficiency (Soft Skills)
• Product Inspection (Hard Skills)
• Problem Diagnosis (Hard Skills)
• Team Leadership (Soft Skills)
• Report Preparation (Hard Skills)
• Safety Compliance (Hard Skills)
• Equipment Monitoring (Hard Skills)

Job Summary: 

• Notify supervisor immediately of any accident, near miss, or on-the-job injury when it occurs, no matter how insignificant it may seem.
• Participate in the safety, quality, autonomous maintenance, TPM and housekeeping programs as established within the plant, including Focused Improvement Events, Safety Committee, Training, etc.
• Perform job tasks to reduce environmental impact and adhere to the environmental regulations and recycling procedures for waste disposal.
• Comply with all plant rules and safety regulations.
• Perform cleanup duties at workstations and/or equipment/machinery.
• Communicate safety concerns and/or equipment problems or abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec.
• Inspect vehicles before use and throughout the shift, keeping all equipment clean and operational.
• Perform electrical, mechanical and hydraulic assembly, disassembly, troubleshooting and repair.
• Complete preventive maintenance according to assignment and schedule.
• Maintain a clean and organized work area to include shop tools and equipment.

Skills on Resume: 

• Accident Reporting (Soft Skills)
• Program Participation (Soft Skills)
• Environmental Compliance (Hard Skills)
• Safety Compliance (Hard Skills)
• Workstation Cleanup (Hard Skills)
• Issue Communication (Soft Skills)
• Equipment Inspection (Hard Skills)
• Preventive Maintenance (Hard Skills)

Job Summary: 

• Assist with set-up and repairs on hydraulic and pneumatic systems.
• Inspect, test, and listen to equipment problems using pressure and temperature gauges.
• Operate forklifts, man-lifts (up to 80 feet), and skid steer loaders.
• Document and maintain all daily service reports and equipment status reports.
• Interact daily with co-workers for technical questions and support.
• Work on the production line on the down mechanical days.
• Ensure all equipment documentation is complete and properly processed.
• Ensure a clean, safe environment and follow all safety protocols, such as Lock Out Tag Out.
• Understand, execute, and complete work orders and shift carryover instructions effectively and efficiently.

Skills on Resume: 

• System Repair (Hard Skills)
• Equipment Inspection (Hard Skills)
• Lift Operation (Hard Skills)
• Report Documentation (Hard Skills)
• Team Collaboration (Soft Skills)
• Production Support (Hard Skills)
• Safety Compliance (Hard Skills)
• Work Order (Hard Skills)

Job Summary: 

• Assume ownership of a designated area of the mill and be responsible for DTM support, predictive maintenance, cost management, zero failure activities, skills enhancement, spare parts, and lubrication management for the equipment in that area.
• Maintain, troubleshoot, repair, or upgrade any piece of equipment in the mill.
• Make repairs in a timely, high-quality, and safe manner.
• Lay out jobs and work from mechanical and structural drawings.
• Develop a good working knowledge of the papermaking process and the DCS system.
• Be responsible for the housekeeping of their work area and job site.
• Be involved in the design and installation of new equipment and modifications.
• Work well with outside contacts such as contractors, vendors, technical support, etc.
• Be responsible for the general maintenance of all plant property and machinery to ensure consistent production of a quality product.
• Perform scheduled preventive maintenance and record results and information in the appropriate format.

Skills on Resume: 

• Predictive Maintenance (Hard Skills)
• Equipment Repair (Hard Skills)
• Drawing Interpretation (Hard Skills)
• Process Knowledge (Hard Skills)
• Housekeeping Standards (Soft Skills)
• Equipment Installation (Hard Skills)
• Vendor Coordination (Soft Skills)
• Preventive Maintenance (Hard Skills)

Job Summary: 

• Perform routine preventive maintenance tasks to monitor, identify, and eliminate potential issues to ensure processing equipment continues to perform at its originally designed capabilities.
• Follow all safety policies and procedures to ensure the safety of oneself and others.
• Troubleshoot and repair or replace defective equipment components or parts using proper maintenance procedures, test equipment, and safe working practices.
• Continually monitor equipment, making all necessary adjustments to ensure safe operations.
• Respond quickly to production equipment breakdowns to determine problems and perform corrective work to return equipment to proper operation.
• Use tools ranging from common hand and power tools to precision measuring instruments and electrical or electronic test equipment.
• Complete all documentation related to repairs and pre-planned work assignments while maintaining a clean and orderly work area.
• Interact and communicate problems and their resolutions to all levels of plant personnel, including machine operators, team leaders, engineers, and other members of management, in a positive, team-building fashion.
• Maintain complete familiarity with production and support equipment.

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• Safety Compliance (Hard Skills)
• Equipment Repair (Hard Skills)
• Equipment Monitoring (Hard Skills)
• Breakdown Response (Hard Skills)
• Tool Operation (Hard Skills)
• Work Documentation (Hard Skills)
• Team Communication (Soft Skills)

Job Summary: 

• Maintain building and grounds to meet high standards of safety, appearance, and function.
• Complete projects related to improving environments for production workers and retail staff.
• Organize and maintain common areas.
• Perform regularly scheduled maintenance.
• Maintain production equipment and ensure the highest possible uptime and the lowest cost of operation achieved from all facility equipment in support of production lines.
• Work with retail and design staff on event setup, which may include working at heights, moving heavy objects, and fabrication of support materials.
• Monitor and assist staff during events.
• Evaluate root cause failure and determine proper corrective action.
• Upgrade production lines with new equipment and technology.
• Work with outside contractors on maintenance projects.
• Comply with outstanding manufacturing practices, safety, and audit standards.

Skills on Resume: 

• Facility Maintenance (Hard Skills)
• Project Execution (Soft Skills)
• Scheduled Maintenance (Hard Skills)
• Equipment Uptime (Hard Skills)
• Event Setup (Hard Skills)
• Root Cause (Hard Skills)
• Equipment Upgrade (Hard Skills)
• Contractor Coordination (Soft Skills)

Job Summary: 

• Install, maintain, dismantle, repair, overhaul, and rebuild electrical, mechanical, and electronic equipment.
• Perform welding, fabrication, carpentry, masonry, plumbing, and electrical repairs or wiring associated with other work to construct, install, and maintain structures, fixtures, and equipment.
• Analyze equipment problems resulting from mechanical, pneumatic, and hydraulic malfunctions.
• Perform preventive maintenance duties, including cleaning, inspecting, and lubricating.
• Perform traditional electrical power or wire hookups up to 480 volts 3-phase, including bending conduit and troubleshooting.
• Comply with all company and industry safety rules, procedures, and applicable government regulations.
• Perform complex troubleshooting and repairs on production equipment, motors and mechanical components, pneumatics, hydraulics, and conveyor systems.
• Read schematics, pneumatic, hydraulic, and electrical.
• Troubleshoot electrical problems, perform preventive maintenance and testing on electrical wiring and various control voltages to include 3-phase equipment up to 600v.
• Perform equipment changeovers according to production demands.
• Provide preventive maintenance to plant equipment.
• Rebuild presses and support equipment.
• Evaluate and maintain hand tools for condition and compliance.

Skills on Resume: 

• Equipment Repair (Hard Skills)
• Welding Fabrication (Hard Skills)
• Problem Analysis (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Electrical Wiring (Hard Skills)
• Safety Compliance (Hard Skills)
• Complex Troubleshooting (Hard Skills)
• Schematic Reading (Hard Skills)

Job Summary: 

• Repair woodworking machinery, infeed and outfeed systems, hand tools, and forklifts in accordance with diagrams, operating manuals, and manufacturer specifications.
• Perform regular preventive maintenance on all machinery, equipment, tools, and buildings.
• Prepare and maintain tooling for all machines.
• Perform set-ups, tune-ups, and run equipment and machinery around the plant.
• Maintain records of purchase, repair, and maintenance activities.
• Perform duties consistent with established safety rules and procedures.
• Maintain a clean and organized work area.
• Participate in safety, CI, and other programs and meetings.
• Observe mechanical devices in operation and listen to their sounds to locate causes of trouble.
• Dismantle devices to gain access to and remove defective parts.
• Examine the form and texture of parts to detect imperfections.

Skills on Resume: 

• Machinery Repair (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Tooling Preparation (Hard Skills)
• Equipment Setup (Hard Skills)
• Record Keeping (Hard Skills)
• Safety Compliance (Hard Skills)
• Workplace Organization (Soft Skills)
• Problem Diagnosis (Hard Skills)

Job Summary: 

• Perform routine maintenance and repair associated with bearings, shafts, chains, conveyors, belts, sprockets, pumps, and related equipment.
• Perform routine maintenance and repair associated with steam, pneumatic, water, hot oil, asphalt, and other related piping equipment.
• Use and interpret schematics and blueprints related to mechanical and electrical equipment within the roofing and asphalt plants.
• Perform preventive maintenance on equipment and resolve identified issues or problems.
• Observe a situation, correctly diagnose the problem, and implement a corrective action with little or no supervision.
• Maintain accurate up-to-date maintenance database records (SAP).
• Participate in the safety and housekeeping programs.
• Provide emergency or unscheduled repairs of production equipment during production.
• Perform duties including mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of machines.
• Support an optimized production environment by applying the principles of Lean Manufacturing and 5S.

Skills on Resume: 

• Equipment Repair (Hard Skills)
• Piping Maintenance (Hard Skills)
• Blueprint Reading (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Problem Diagnosis (Hard Skills)
• Database Management (Hard Skills)
• Safety Compliance (Hard Skills)
• Lean Manufacturing (Hard Skills)

Job Summary: 

• Be responsible for the maintenance and repair of processing manufacturing equipment, including air compressors, conveyors, industrial fans, electric motors, electric and pneumatic tools, gearboxes, etc.
• Effectively communicate with other employees in the facility, both verbally and in writing.
• Read and understand mechanical and electrical prints, diagrams, and technical repair manuals.
• Install, maintain, and repair automated machinery. 
• Change between assignments quickly (unscheduled repairs).
• Complete assigned duties with little or no supervision or instruction.
• Apply knowledge of occupational hazards and necessary safety precautions applicable to maintenance work.
• Operate personal lifts and material handling tools and equipment.
• Carry out various clerical or janitorial duties.
• Follow all safety rules and keep the work area clean and safe from hazards.

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Team Communication (Soft Skills)
• Print Reading (Hard Skills)
• Machinery Installation (Hard Skills)
• Unscheduled Repairs (Hard Skills)
• Independent Work (Soft Skills)
• Safety Compliance (Hard Skills)
• Lift Operation (Hard Skills)

Job Summary: 

• Be a multi-skilled maintenance technician capable of electrical, mechanical, hydraulic, and pneumatic troubleshooting and repair of all phases of sheet metal production and assembly equipment.
• Perform preventive maintenance tasks on sheet metal processing equipment to include mechanical punch presses, mechanical and servo turret presses, sheet metal and copper forming and bending equipment, as well as cranes, material handling equipment, and other production machinery and equipment.
• Perform preventive maintenance duties, including cleaning, inspecting, and lubricating production equipment.
• Troubleshoot and repair to support epoxy coat and powder coat metal finishing processes.
• Install, maintain, dismantle, repair, overhaul, and rebuild electrical, mechanical, and electronic equipment.
• Analyze equipment problems resulting from mechanical, pneumatic, and hydraulic malfunctions.
• Perform traditional electrical power or wire hookups up to 480 volts 3-phase, including bending conduit and troubleshooting.
• Be responsible for repairs, troubleshooting, routine, and preventive maintenance on weekends or as scheduled.
• Write, maintain, and follow standard operating procedures (SOPs) and job safety analysis (JSAs).

Skills on Resume: 

• Equipment Troubleshooting (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Equipment Lubrication (Hard Skills)
• Process Support (Hard Skills)
• Equipment Installation (Hard Skills)
• Problem Analysis (Hard Skills)
• Electrical Wiring (Hard Skills)
• Procedure Compliance (Hard Skills)

Job Summary: 

• Complete preventive, predictive, and reactive industrial maintenance throughout the facility.
• Document all completed work and the conditions found, utilizing maintenance computer software.
• Install, maintain, test, evaluate, and repair various components and systems, including heavy mobile equipment, hydraulic systems, 12 and 24V mobile electrical systems, belt conveyors, gear reducers, and bearings.
• Operate standard maintenance tools such as power tools, basic hand tools, pneumatic tools, and electric tools.
• Comprehend mechanical and electrical schematics, blueprints, and operation manuals.
• Understand and adhere to all safety policies and procedures.
• Maintain a safe and clean work environment.
• Adjust, repair, and replace components like belts, cables, wheels, pulleys, gearboxes, sprockets, chains, bearings, guide rollers, hydraulic and pneumatic systems, and AC or DC electrical motors, drives, and other related equipment.
• Maintain and perform troubleshooting on electrical and mechanical conveyor systems, sorters, printer applicators, motors, photo eyes, relays, proximity sensors, solenoids, VFDs, motor starters, control panels, tachometers, encoders, etc., with a focus on safety, quality, and efficiency using tools such as multimeters, infrared thermometers, and a laptop.
• Follow appropriate job plans, procedures, and manuals.
• Utilize handheld devices and asset management system mobile apps to create and close work orders with appropriate data (labor hours, downtime, problem or cause or remedy, and parts used).
• Follow appropriate safety procedures and use personal protective equipment (PPE) while maintaining equipment (Lock Out or Tag Out, Arc Flash, etc.) and ensure a safe work environment by eliminating potential equipment safety hazards.

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• Work Documentation (Hard Skills)
• System Repair (Hard Skills)
• Tool Operation (Hard Skills)
• Blueprint Reading (Hard Skills)
• Safety Compliance (Hard Skills)
• Component Replacement (Hard Skills)
• System Troubleshooting (Hard Skills)

Job Summary: 

• Maintain, troubleshoot, and repair wafer fab production equipment to ensure equipment uptime during production.
• Perform troubleshooting activities and maintain or update documents accordingly.
• Work from technical manuals, specifications, drawings, schematics, and verbal instructions.
• Perform administrative maintenance duties, including maintaining preventive maintenance (PM) schedules, PM reports, troubleshooting reports, and re-ordering, maintaining, and organizing equipment spare parts.
• Perform shutdowns and startups during all facility activities on all affected semiconductor equipment.
• Oversee or perform general housekeeping.
• Be responsible for the installation, maintenance, troubleshooting, and repair of industrial machinery.
• Perform routine mechanical or machining maintenance activities on equipment.
• Participate in a preventive maintenance program based on OEMs (original equipment manuals) for plant equipment, machinery, and related facilities.
• Maintain records of daily PMs and readings, such as emissions, dust collector, amp on blast wheels, and conductivity for the water treat system.
• Perform troubleshooting, repair, and preventive maintenance on mechanical and electrical issues on both manufacturing and building equipment.
• Replace motors, drives, wiring, circuit breakers, coils, and switches on equipment.
• Perform minor parts fabrication using a welder, mill, lathe, or other equipment.

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Troubleshooting Reports (Hard Skills)
• Manual Interpretation (Hard Skills)
• PM Scheduling (Hard Skills)
• System Shutdown (Hard Skills)
• Housekeeping Duties (Hard Skills)
• Machinery Installation (Hard Skills)
• Parts Fabrication (Hard Skills)