• Evaluates and prioritizes daily workload to ensure all maintenance requests and emergencies are completed on time and according to health and safety standards.
• Assists the maintenance team in diagnosing malfunctions in fulfillment machinery and equipment.
• Accesses and updates maintenance management forms and systems.
• Participates in maintenance workload meetings and identifies and communicates best practices.
• Executes and follows up on all preventative maintenance, scheduled maintenance, and repairs to ensure continued functioning.
• Conducts scheduled safety inspections and audits by leadership.
• Examines, maintains, and tests machinery, equipment, components, and parts for defects to ensure proper functioning and ensure proper equipment storage.
• Complies with all health and safety regulations (OSHA) and encourages peers to do the same.
• Executes preventative and corrective electrical maintenance functions on all facility equipment (208v, 220v, 277v, 480v).
• Provides clear and concise communication and updates to leadership and fosters an environment of open communication and collaboration.

Skills: Workload Management, Equipment Diagnostics, Maintenance Systems, Preventive Maintenance, Safety Compliance, Electrical Maintenance, Machinery Inspection, Team Communication

• Install, repair, rebuild, and maintain machinery and mechanical equipment used in production and related services, maximizing production time and minimizing downtime.
• Diagnose machine malfunctions and operating difficulties.
• Make repairs or adjustments to keep equipment in production.
• Explore methods for the improvement of machine operation.
• Upgrade machinery and equipment to improve production.
• Rebuild machines and overhaul troublesome components and attachments to involve dismantling, inspection, machining, or replacement of purchased parts.
• Assist with activities related to the installation and relocation of existing machines and equipment to involve dismantling, erection, leveling, fitting, and aligning operations.
• Perform maintenance on the buildings, facilities, and grounds.
• Perform all assigned preventive maintenance on production equipment and machinery, and the building and grounds.
• Adhere to quality and environmental policies, procedures, goals, and objectives, and comply with all safety and work rules when performing duties.
• Complete and maintain all required checklists, paperwork, records, documents, and maintain departmental housekeeping standards.

Skills: Machine Maintenance, Equipment Repair, Fault Diagnosis, Process Improvement, Machinery Upgrades, Preventive Maintenance, Facility Maintenance, Documentation Compliance

• Start machines and observe mechanical operation to determine efficiency and to detect problems.
• Read work orders and specifications to determine machines and equipment requiring repair or maintenance.
• Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs.
• Reassemble machines after the completion of repair or maintenance work.
• Follow and enforce all safety rules, including but not limited to Lock Out and Tag Out (LOTO) procedures.
• Hold blood lead levels low by adhering to good safety practices.
• Provide ideas and solutions to equipment improvement and participate in miscellaneous improvement teams.
• Communicate with coworkers to coordinate installations or repairs.

Skills: Machine Operation, Work Order Reading, Parts Inspection, Machine Reassembly, Safety Compliance, Hazard Control, Process Improvement, Team Communication

• Identify safety hazards within the building and incorporate the remediation of such hazards to ensure that the building's staff and occupants work in a safe environment.
• Troubleshoot electrical, hydraulics, pneumatics, and mechanical systems to identify the faulty component.
• Troubleshoot, including but not limited to AC and DC motors, motor starters, PLCs, and VFDs.
• Maintain, modify, and troubleshoot compressor test stands, chillers, and cooling towers.
• Install, maintain, and modify piping systems, pumps, and valves.
• Observe and test the operation of machinery and equipment to diagnose malfunctions and other test equipment under the instruction of the technical services supervisor.
• Analyze test results, machine error messages, and information obtained from operators to diagnose equipment problems.
• Repair and maintain Fanuc and ABB robotics and CNC machines, including DMG Mori machining centers.
• Complete assigned preventive maintenance actions promptly.
• Log completion status and work history into the PM system.
• Install and maintain hydraulic circuits in industrial equipment, including hoses, relief valves, proportional valves, and other hydraulic components.
• Participate in and provide input into root cause failure analysis investigations.
• Repair and maintain the operating condition of all industrial production equipment, including test stands, etc.

Skills: Safety Management, System Troubleshooting, Motor Controls, Cooling Systems, Piping Maintenance, Equipment Testing, Robotics Repair, Root Analysis

• Maintain a clean and orderly work area and warehouse.
• Maintain a safe working environment by following all company safety policies and procedures and report unsafe conditions and incidents, while maintaining quality standards.
• Review, repair, and maintain electrical safety and electronic requirements on all equipment.
• Troubleshoot, repair, perform minor programming, and maintain PLCs, drive systems, and PID loops.
• Diagnose root cause and maintain 3-phase electrical system, motors, breakers, starters, and overloads.
• Install power supply wiring and conduit for existing and newly installed machines and equipment, such as conveyors and programmable controllers.
• Review, initiate, and close the current preventative maintenance program.
• Dismantle, relocate, and install production equipment.

Skills: Workplace Organization, Safety Compliance, Electrical Maintenance, PLC Troubleshooting, Root Cause Analysis, Power Installation, Preventive Maintenance, Equipment Installation

• Diagnose mechanical problems using charts, diagnostic software, technical manuals and expertise.
• Perform repairs and maintenance on recycling equipment, compact heavy equipment and light trucks to maximize safe and productive operations.
• Route maintenance and repair of hydraulic systems, recycling equipment, transmissions, electrical systems, engines, balers, conveyor systems, and compactors.
• Repair or replace parts by a work order system.
• Complete field service reports in a work order system.
• Overhaul or replace machine components and worn items.
• Communicate with supervisor and equipment operators for clarification of problems.
• Discuss preventive techniques with equipment users to minimize future repairs.
• Independently troubleshoot and maintain complex electromechanical equipment.
• Complete daily consumables report to record hours, fuel and oil usage, and provide information for input in the Republic Services Dossier (Fleet Management Software) system.
• Perform preventative maintenance according to standard schedules.
• Maintain, repair and install plumbing, electrical, HVAC, odor systems, and negative pressure systems.
• Install and set up new equipment and communicate with vendors regarding maintenance schedules.
• Read, troubleshoot and program simple PLC instructions to enhance plant monitoring and performance by operations staff or to support maintenance objectives.

Skills: Mechanical Diagnostics, Equipment Repair, Hydraulic Maintenance, Parts Replacement, Field Reporting, Component Overhaul, Preventive Maintenance, PLC Programming

• Repair electrical, vacuum, mechanical, and pneumatic systems.
• Perform electrical and mechanical calibrations and alignments.
• Perform preventative maintenance on multiple systems.
• Respond to maintenance requests promptly.
• Conserve resources by using equipment and supplies to accomplish job results without waste.
• Use knowledge and experience to resolve basic operating problems and report other problems to the supervisor.
• Maintain a clean and organized work environment.
• Follow safety policies and procedures and report unsafe conditions to the supervisor.
• Perform a wide variety of building maintenance and repairs.
• Use wrenches, screwdrivers, hand tools, electrical testing devices, and power tools to perform work.

Skills: System Repair, Calibration Alignment, Preventive Maintenance, Request Response, Resource Management, Problem Solving, Workplace Organization, Safety Compliance

• Repair and maintain, in accordance with diagrams, operation manuals, and manufacturer’s specifications, plant machinery and mechanical equipment specific to the operation.
• Analyze and diagnose production machinery and equipment malfunctions.
• Service, repair and replace defective parts using hand tools and power tools and start machines and equipment to test their performance.
• Work safely to prevent on-the-job injuries by operating and repairing equipment safely and efficiently to minimize risk to personnel and damage to equipment and inventory.
• Maintain sanitary conditions while performing work.
• Calibrate and make adjustments on production machinery and equipment to improve operational capabilities using hand tools.
• Provide technical assistance to the production department in setup and changeover of production equipment.
• Perform preventive maintenance on machinery and equipment and document tasks performed in preventive maintenance records.
• Identify ways to improve production methods by observing work processes and working with line personnel.
• Modify machinery and equipment by the engineering department to improve functional performance.
• Rebuild and install functional parts of production machinery.
• Collaborate with outside vendors to enhance in-house maintenance capabilities.
• Confer with and assist the engineering department in the implementation and modification of maintenance programs.
• Maintain and service the external components of the dust collection system.

Skills: Equipment Repair, Fault Diagnosis, Parts Replacement, Safety Practices, Sanitary Maintenance, Machine Calibration, Preventive Maintenance, Process Improvement

• Record parts and materials used, record repairs and maintenance performed.
• Clean, lubricate, and adjust parts, equipment, and machinery.
• Disassemble machinery and equipment to remove parts and make repairs.
• Examine parts for defects such as breakage and excessive wear.
• Observe and test the operation of machinery and equipment to diagnose malfunctions.
• Operate newly repaired machinery and equipment to verify the adequacy of repairs.
• Reassemble equipment after completion of inspections, testing, or repairs.
• Repair and maintain the operating condition of industrial production and processing machinery and equipment.
• Repair and replace broken or malfunctioning components of machinery and equipment.
• Be responsible for upholding and maintaining the food safety and quality systems.

Skills: Parts Recording, Equipment Lubrication, Machinery Disassembly, Defect Inspection, Malfunction Diagnosis, Repair Verification, Equipment Reassembly, Food Safety

• Effectively utilize PM software and work order queue to perform scheduled maintenance and repairs.
• Participate in the planning, installation, modification, maintenance and repair of electrical and mechanical systems, hydraulic and pneumatic systems, power-distribution systems, instrumentation, production equipment, facilities and related electronic controls and devices.
• Maintain all plant facility equipment, emergency lighting, fire protection and utilities.
• Assist with product and tooling changeovers, start-up and shut-down procedures.
• Ensure the availability of replacement parts for key manufacturing equipment to minimize unnecessary machine downtime.
• Effectively troubleshoot issues and efficiently make repairs.
• Interpret blueprints, sketches, maintenance manuals and manufacturing specifications.
• Cut, form, thread, fit and install piping for air, water, steam, oil, nitrogen, gas, and other lines.
• Prepare and weld in flat, vertical, or overhead positions with multiple technologies.
• Use gas torches or other equipment to cut structural stock for fabrication.
• Ensure all equipment and tools are stored and maintained properly to avoid interruption of production and to minimize unnecessary downtime.
• Perform a variety of manual tasks in varying temperatures for extended periods of time, which may include lifting light to heavy materials, climbing, standing, squatting, bending, and working at heights.

Skills: PM Software, System Maintenance, Facility Equipment, Changeover Support, Parts Management, Issue Troubleshooting, Blueprint Interpretation, Pipe Welding

• Operate lift trucks and cranes properly and advise of any defective parts or equipment.
• Maintain constant communication with the maintenance team and management.
• Coordinate with outside contractors on equipment repairs.
• Provide input and ensure completion of plant projects and goals, as set forth by management.
• Support daily production goals, as they apply to maintenance and repair needs.
• Assist with manufacturing processes, including equipment layout, workflow, assembly methods, and workflow utilization.
• Abide by safe work standards, including Lock Out and Tag Out (LOTO), fall protection, confined spaces, and appropriate use of personal protective equipment (PPE), NFPA 70E (arc flash), and all company safety practices and OSHA regulations.
• Support plant safety initiative, maintain safety protocols throughout the production area.
• Participate in all departmental meetings and daily plant walks.
• Contribute to ongoing plant improvements.
• Abide by all corporate and plant company policies and initiatives.
• Work with the quality team to assist with ISO and IATF standards and audits.
• Maintain clean work areas, practice good housekeeping and support plant-wide 5S initiative.

Skills: Equipment Operation, Team Communication, Contractor Coordination, Project Support, Production Support, Safety Compliance, Quality Standards, Workplace Organization

• Troubleshoot electrical, hydraulics, pneumatics and mechanical systems to the faulty component under the instruction of the maintenance technician.
• Observe and test the operation of machinery and equipment to diagnose malfunctions and other test equipment under the instruction of the maintenance technician
• Analyze test results, machine error messages, and information obtained from operators to diagnose equipment problems.
• Repair and maintain Fanuc and ABB robotics and CNC machines, including Mazak and Makino machining centers, under the instruction of the maintenance technician.
• Perform extended I/O troubleshooting, replace faulty modules, and field components under the instruction of the maintenance technician.
• Install and maintain hydraulic circuits in industrial equipment components under the instruction of the maintenance technician.
• Repair and maintain the operating condition of all industrial production equipment, including test stands and devices used to move, lift or convey product under the instruction of the maintenance technician.
• Perform automation troubleshooting to include AC and DC motors, motor starters and VFDs under the instruction of the maintenance technician.
• Repair inventory and quality control systems such as visual recognition, RF ID and dot matrix printer hardware under the instruction of the maintenance technician.
• Follow all safety rules, including PPE, NFPA 70, NEC and OSHA.

Skills: System Troubleshooting, Equipment Testing, Fault Analysis, Robotics Maintenance, I/O Troubleshooting, Hydraulic Maintenance, Automation Repair, Safety Compliance

• Repair and perform preventative maintenance of plant machinery, equipment and facilities, including physical structures, piping, mechanical and electrical systems.
• Set up, start, and operate machinery to test their performance.
• Adjust machinery to maintain peak performance.
• Use tooling, hand tools, power tools, and precision-measuring and testing instruments to maintain equipment and facilities in good working order.
• Dismantle defective machines and equipment and install new or repaired parts.
• Clean and lubricate shafts, bearings, gears and other parts of machinery.
• Perform preventative maintenance of machine tooling, hand tools and machinery to maintain in good working order.
• Install and repair electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment including 480/277 volt power systems (WYE) and 208/120 volt power systems (WYE).
• Lay out, assemble, install and maintain pipe systems and related hydraulic and pneumatic equipment, and repair and replace gauges, valves, pressure regulators and related equipment.
• Install, program and repair automated machinery and equipment, including robots and programmable controllers.

Skills: Preventive Maintenance, Machine Operation, Performance Adjustment, Equipment Dismantling, Parts Lubrication, Electrical Repair, Pipe Systems, Automation Repair

• Clean and lubricate shafts, bearings, gears, and other parts of machinery.
• Troubleshoot and repair machinery such as extruders, mixers, conveyors, and metal detectors.
• Install and maintain pipe systems, hydraulic steam, and pneumatic equipment.
• Repair and replace gauges, valves, pressure regulators, and other related equipment.
• Perform building maintenance, including minor plumbing, welding, and general upkeep.
• Meet plant objectives in safety, quality, cost, and customer care.
• Perform daily and weekly PMs and run projects to ensure equipment is running properly.
• Provide efficient troubleshooting and repair equipment to maximize efficiencies and limit downtime.
• Maintain and repair all equipment in operation, which includes all mechanical troubleshooting.
• Observe, test, diagnose, and repair problems with industrial machinery and building systems.
• Install industrial machinery and equipment, including anchoring, leveling, attaching a power supply, and testing functions.
• Use the computerized maintenance management system (CMMS) to receive work orders and keep accurate records of work performed.
• Perform routine maintenance of the facility, grounds, and equipment.

Skills: Machinery Lubrication, Equipment Troubleshooting, Pipe Maintenance, Valve Repair, Building Maintenance, Preventive Maintenance, CMMS Management, Machinery Installation

• Assist other technicians in the repair and maintenance of equipment.
• Complete work orders, records, logs, and other written or computer-based documents according to established procedures.
• Diagnose mechanical and electrical problems using technical drawings such as blueprints and electronic or mechanical schematics and diagnostic tools such as multimeters and laptops.
• Operate material handling equipment, battery equipment, moving machinery, and other powered equipment, and utilize TCP/IP as a troubleshooting and setup tool.
• Perform preventive maintenance and repairs on equipment such as pneumatic systems, material handling equipment, hydraulic equipment, dock equipment, and electronic and electrical equipment according to safety and quality procedures.
• Perform daily water treatment tests to ensure proper preventive maintenance of open and closed cooling and heating loops.
• Identify and correct problems with pumps, motors, valves, and heat exchangers.
• Display welding and fabricating skills.
• Utilize preventive maintenance systems by planning daily activities with production.
• Plan, layout, install, maintain, program, and troubleshoot electrical and electronic controls and equipment, including PLCs and motion control devices.
• Work from complicated drawings, specifications, or wiring diagrams and have hands-on knowledge of electricity and electronics.
• Work without drawings and create such drawings for project work.
• Keep current with developments in their respective field.
• Direct the work of helpers, instruct plant emergency squad members, and operate a power truck.

Skills: Equipment Maintenance, Work Documentation, Problem Diagnosis, Material Handling, Preventive Maintenance, Water Testing, Pump Repair, Electrical Controls

• Industrial maintenance experience, including hydraulics, pneumatics, and machining.
• Experience with metal stamping and/or cold forming machine repair.
• Experience with work order/preventative maintenance (PM) software package.
• Knowledge of pneumatics, hydraulics, mechanical, and electrical.
• Proficient in welding (metal inert gas, tungsten inert gas).
• Good oral and written communication skills and the ability to work well with other employees.
• Good problem-solving, math, and computer skills.
• Ability to read blueprints, drawings, and sketches.
• Ability to use a wide variety of metalworking, hand, and power equipment.
• Ability to train on the first/day shift for a few months before shifting to the night shift.
• Ability to use a wide variety of precision measuring devices.
• Ability to meet the physical requirements, with or without reasonable accommodation, as provided in detail in the Job Analysis Database.

Qualifications: BS in Mechanical Engineering with 6 years of Experience

• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, techniques and operations.
• Thorough knowledge in all building systems operations, maintenance and repair.
• Knowledge and experience with physical plant and facilities services operations of a large, complex manufacturing facility
• Knowledge of building trades, repairs and maintenance.
• Knowledge of federal, state, and local codes and ordinances pertinent to facilities planning, design, construction, and maintenance.
• Skill in the use of computers in a PC, Windows-based operating environment.
• Skill in organizing resources and establishing priorities.
• Basic computing skills in Outlook, Excel and Word.
• Ability to communicate effectively, both orally and in writing.
• Ability to respond outside of normal working hours on an on-call or pager basis.

Qualifications: BS in Electrical Engineering with 5 years of Experience

• Industrial maintenance experience within a manufacturing facility.
• Strong mechanical aptitude with experience in manufacturing.
• Strong organizational, verbal, and written communication skills.
• Proven ability to successfully meet customer and management deadlines.
• Ability to work a flex schedule.
• Ability to make sound decisions regarding resource utilization and needs.
• Ability to work cross-functionally to achieve outstanding results.
• Highly organized, self-starter who can work with little direct supervision.

Qualifications: BS in Industrial Technology with 3 years of Experience

• Industrial electrical/mechanical maintenance experience.
• Mechanical machine repair experience.
• Working knowledge of electrical systems and controls.
• Working knowledge of DC drives and AC frequency drives.
• Functional knowledge of PLCs, Allen-Bradley/Rockwell.
• Knowledge of instrumentation theory (4-20 MA, 0-10 VDC, process scaling, etc.).
• Knowledge of transducers and their operation (pressure, temperature, flow, distance, I/P, etc.).
• Solid knowledge of communication protocols (RS232, Ethernet/IP, DH and DH+, ASI bus network).
• Ability to work in a team environment.
• Strong communication skills.

Qualifications: BS in Mechatronics Engineering with 4 years of Experience

• Certifications in PM/TMP for hydraulic equipment/power units, machine tools, CNC machining, robotics, and maintenance.
• Technical school degree in engineering principles or a combination of education and experience.
• Experience in a manufacturing environment with preventive maintenance (PM) / (TMP).
• Experience in machine shop operations and basic fabrication.
• Knowledge of mechanical and electrical equipment, as well as controls in the industrial environment.
• Strong planning, organizational, analytical, communication, and networking skills.
• Basic to intermediate computer skills (MS Office, Word, Excel, Outlook).
• Self-motivated, energetic, dependable, honest, detail-oriented, and thorough.

Qualifications: BS in Manufacturing Engineering with 6 years of Experience

• Previous manufacturing experience.
• Experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings).
• Experience with electrical systems to include low voltage control circuits, motor circuit controls, VFDs, PLC troubleshooting knowledge, and electrical safety systems.
• Experience in electro-mechanical troubleshooting.
• Pneumatic and hydraulic system knowledge.
• Be able to troubleshoot mechanical breakdowns (pinpointing and fixing breakdowns).
• Strong in precision maintenance.
• Ability to produce manuals (e.g., reading and applying knowledge to make repairs).
• Be able to read mechanical drawings (e.g., hydraulics, pneumatics).

Qualifications: BS in Automation Engineering with 7 years of Experience

• Industrial electrical experience.
• Knowledge of electrical theory and principles of operation.
• Problem-solving experience/capability.
• Standard knowledge of product specifications, quality requirements, production goals, efficiency, and waste.
• Knowledge of Rockwell and Siemens PLC, along with a background in machine process control (vonDrehle uses Rockwell servo control systems along with advanced networking communications, including Ethernet and SERCOS protocols).
• Knowledge of basic web handling with industrial experience with a focus on paper products converting, packaging.
• Strong analytical skills, understanding of cause and effect logic.
• Demonstrated safe, effective use of hand, maintenance, power, and shop tools.
• Demonstrate mechanical aptitude.
• Good communication skills and be ability to work well in a team-oriented environment.
• Basic computer skills, including but not limited to Outlook email and Microsoft Suite applications.
• Ability to perform accurate electrical and mechanical repairs.
• Ability to climb, stoop, reach, and bend on a continuous basis.
• Self-motivated and able to work independently and as a team, utilizing mechanical and analytical aptitude.

Qualifications: BS in Maintenance Engineering with 5 years of Experience

• Previous experience in industrial maintenance or other related fields.
• Industrial electric experience.
• Experience in maintaining machinery.
• Mechanical maintenance experience.
• Previous work experience as an industrial maintenance technician.
• In-depth knowledge of mechanical and electrical systems maintenance.
• Knowledge of parametric and industrial control systems.
• Familiarity with OSHA safety standards and regulations.
• Familiarity with maintenance tools and equipment.
• Ability to handle physical workload.
• Ability to troubleshoot and problem-solve.
• Excellent troubleshooting skills.
• Basic computer and report writing skills.
• Good communication skills.
• Ability to lift and manipulate heavy equipment.
• Good time-management skills.

Qualifications: BS in Instrumentation Engineering with 7 years of Experience

• Previous experience in general maintenance and equipment repair.
• Knowledge of TPM methodologies and procedures.
• Knowledge of lean principles, QDC, 5S and continuous improvement process.
• Knowledge of industrial maintenance disciplines.
• Basic computer skills with internet experience.
• Ability to perform addition, subtraction, multiplication, and division in all units of measure, using whole numbers, common fractions, and decimals.
• Must possess strong basic shop math skills.
• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
• Ability to deal with problems involving several concrete variables in standardized situations.
• Strong mechanical aptitude/ability with working knowledge of production equipment using hydraulic, pneumatic and electrical power and controls.

Qualifications: BS in Robotics Engineering with 5 years of Experience

• Experience maintaining and troubleshooting pneumatic and hydraulic devices and systems (pumps, valves, piping, etc.).
• Experience with machine shop equipment to include mills, lathes, presses, and surface grinders, to a prescribed specification by mechanical print.
• Experience with basic welding techniques and metal fabrication, including MIG, TIG, and stick.
• Experience with threading and installing black and brass pipe in a proficient manner.
• Ability to prepare, modify, maintain plant equipment, repair breakdowns, perform preventative maintenance on machines, and modify equipment.
• Proficiency in the use of a personal computer.
• Ability to work in a team environment and be self-motivated.
• Ability to perceive the quality of work, read material, and review documents, receive instructions.

Qualifications: BS in Systems Engineering with 7 years of Experience

• Certificate in electronic diagnostics.
• Experience with building maintenance, HVAC, odor systems and negative pressure systems.
• Experience working on equipment in a manufacturing or distribution environment.
• Previous industry experience.
• Previous technical/installation experience.
• Previous customer service experience.
• PLC programming experience.
• Equipment maintenance and repair experience.
• Working knowledge of Tier 4 emission systems.
• Welding and/or fabrication skills and/or experience.
• Exceptional ability to work independently without direct supervision and take responsibility for the repair of assigned equipment.
• Exceptional ability to properly investigate problems with equipment, discover the issue, and correct it.

Qualifications: BS in Electrical and Computer Engineering with 8 years of Experience

• Previous machine maintenance experience.
• Previous experience with AutoCAD.
• Experienced with 3-phase electrical repairs and working on automated machines.
• Experience in an industrial manufacturing environment.
• Average understanding of basic computer principles (Microsoft Excel, Word) to properly enter quality control information and inventory information.
• Working knowledge of rigging methods used to move heavy equipment.
• Ability to read and work from blueprints and schematics.
• Ability to perform maintenance on assigned production machinery, including analyzing, diagnosing and resolving mechanical and operational problems.
• Ability to communicate well with peers and management.
• Be able to read written instructions and follow verbal instructions.
• Ability to multitask, prioritize and work under time constraints.

Qualifications: BS in Engineering Technology with 5 years of Experience

• Work experience as a maintenance technician in a manufacturing or military environment.
• Multi-craft experience (electrical/mechanical).
• Welding and/or fabrication experience.
• Experience in working in a safety-oriented environment.
• Experience in industrial maintenance.
• Experience working on hydraulics and pneumatics.
• Experienced in 3-phase electrical repairs.
• Strong understanding of frequency drives, servos, electrical and PLCs.
• Basic understanding of electricity.
• Basic understanding of hydraulics and conveyors.
• Ability to use basic computer systems (Outlook, Word, Excel, etc.).

Qualifications: BS in Applied Physics with 7 years of Experience

• Commercial or industrial maintenance-related experience and/or training.
• Experience with low and high-voltage electrical systems.
• Industrial maintenance experience.
• Experience with PLCs and programming in a manufacturing environment.
• Experience performing industrial maintenance.
• Hands-on experience in industrial maintenance, mechanical, hydraulic and electrical or electronic systems.
• Basic knowledge of hydraulics and pneumatics.
• Basic use of hand and power tools.
• Ability to read and interpret electronic/hydraulic drawings, schematics and engineering blueprints to determine problem root causes and implement corrective action.
• Ability to read precision measuring instruments such as micrometers, calipers, indicators, levels, and lasers.
• Strong computer skills.

Qualifications: BS in Industrial Engineering with 6 years of Experience

• Experience as a mechanic/machinist working with process manufacturing equipment, strong education and work background in processing or manufacturing equipment troubleshooting, adjustment, repair and controls.
• Industrial maintenance experience in the hot metal foundry industry, steel mill, or heavy industrial manufacturing environment.
• Experience in material moving systems, silo mixing, conveyors, bucket elevators, forklifts, cranes, and frontend loaders.
• Welding and oxy/fuel cutting experience.
• Demonstrated industrial mechanical and industrial 3-phase electrical knowledge and repair abilities.
• Ability to understand technical procedures, read and interpret instrument diagrams and other manuals.
• Be able to work competently working hydraulic and pneumatic equipment.
• Must be able to read, write, and communicate effectively with team members.
• Ability to manage multiple complicated priorities/tasks.
• Computer literate (e.g., Excel, Word, Outlook, Internet).

Qualifications: BS in Electromechanical Engineering with 9 years of Experience