Job Summary: 

• Responding to maintenance requests, diagnosing failures, and repairing equipment to support manufacturing operations and engineering.
• Maintaining equipment by preventative maintenance schedule
• Maintaining records for all calibrations, repairs, and maintenance.
• Identifying and communicating chronic maintenance problems to manufacturing engineering.
• Purchasing materials for services related to equipment maintenance and improvements
• Preparing and installing new equipment for release to manufacturing and facilities
• Developing and generating drawings for manufacturing and facilities
• Performing tests and quality checks on manufacturing and facilities equipment, prototype fixtures, or released final assemblies
• Assisting in preventative maintenance of the facility including data line installation, minor plumbing and electrical repair, as well as the processed chilled water system.

Skills on Resume: 

• Equipment Diagnostics (Hard Skills)
• Preventative Maintenance (Hard Skills)
• Maintenance Record Keeping (Hard Skills)
• Issue Communication (Soft Skills)
• Material Purchasing (Hard Skills)
• Equipment Installation (Hard Skills)
• Drawing Generation (Hard Skills)
• Facility Support (Hard Skills)

Job Summary: 

• Perform technical support activities related to the manufacturing line, evaluation, and data collecting.
• Control SPC and line monitoring activities with the appropriate action.
• Collect data, and transform it into information ready for further actions.
• Control yield monitoring and troubleshooting activities.
• Control distribution of Engineering change information.
• Control internal documents related to the Manufacturing Engineering Department.
• Support activities related to operation with engineering approaches to achieve the organization's goal.
• Develop MFG tools and equipment to improve quality product cost.
• Coordinate with other sections concerning technical issues related to operation support.
• Establishes appropriate performance reports and performs related work as assigned.
• Repair damaged MSP, Tester card, small tool, Equipment, and IT Equipment at the appropriate cost.
• Collect data/Analyze and transform to information ready for further actions.
• Control internal documents related to the Tooling and Maintenance Department.
• Plan and manage MSP and Operating supply with the appropriate cost.

Skills on Resume: 

• Technical Support (Hard Skills)
• SPC & Line Monitoring (Hard Skills)
• Data Collection & Analysis (Hard Skills)
• Yield Monitoring & Troubleshooting (Hard Skills)
• Engineering Change Control (Hard Skills)
• Document Management (Hard Skills)
• Operational Support (Soft Skills)
• Tool & Equipment Development (Hard Skills)

Job Summary: 

• Own and be accountable for the generation and maintenance of all maintenance for equipment and support all in-house calibrated equipment when required.
• Diagnose problems and actively provide solutions to support operational optimization.
• Generate and update Maintenance, Working Instructions, and Health & Safety documentation on an ongoing basis.
• Organize external calibration/servicing or organize Contractors to come to the Site
• Ensuring continued conformity with ISO:9001 quality standards.
• Disassemble, decontaminate, clean, and inspect a variety of equipment for maintenance, testing, repair, or for process reasons.
• Participate in the construction, conditioning, testing, and commissioning of equipment.
• Condition and test equipment ready for installation or use.
• Work within clean room environments to clean room standards
• Ensure all asset and equipment solutions are provided in a cost-effective, safe, and compliant manner and follow any customer requirements or contractual obligations.
• Responsible for proper planning and scheduling for maintenance, repair, commissioning, decommissioning, validation, and calibration.
• Responsible for maintaining and updating all assigned systems and databases.
• Ensure work is following approved equipment, calibration, maintenance, and safety procedures including managing any conflict.
• Review and update equipment, maintenance, and calibration procedures and utilize experience to coach or provide guidance.
• Ensure health & safety, quality, regulatory and environmental awareness are at the core of all activities.
• Develops and maintains appropriate SQEP levels including succession planning.

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Problem Solving (Hard Skills)
• Documentation Updates (Hard Skills)
• Calibration Coordination (Hard Skills)
• ISO Compliance (Hard Skills)
• Equipment Repair (Hard Skills)
• Equipment Testing (Hard Skills)
• Safety and Compliance Awareness (Soft Skills)

Job Summary: 

• Perform basic troubleshooting on electronic, electrical, and mechanical systems
• Conduct scheduled preventative maintenance on machinery and testers to maintain a safe and reliable environment for the workforce
• Manage preventative maintenance systems
• Own the Lock-Out-Tag-Out program
• Troubleshooting, repair, and maintenance of all Surface Mount Technology equipment and process-related equipment.
• Perform machine maintenance and calibrations, utilizing an equipment tracking interface to record machine uptime, MTTR, and MTBF.
• Provide written and verbal pass-downs and other information in an organized manner.
• Complete assigned projects and tasks in an accurate and timely manner.
• Assist in the installation of all manufacturing equipment.
• Assist engineering in designed experiments, process development, and SPC tracking.
• Be quality-conscious in all aspects of production support.

Skills on Resume: 

• Troubleshooting Systems (Hard Skills)
• Preventative Maintenance (Hard Skills)
• Maintenance Management (Hard Skills)
• Lock-Out-Tag-Out Program (Hard Skills)
• Surface Mount Technology Support (Hard Skills)
• Equipment Calibration (Hard Skills)
• Communication Skill (Soft Skills)
• Quality Focus (Soft Skills)

Job Summary: 

• Operate equipment used during production
• Work with team to process fresh plants at remote locations
• Operation, set up, break-down, and maintenance of equipment at remote locations
• Take responsibility for the cleaning of all equipment
• Packaging, shipping, and receiving of products and supplies
• Pack commercial products and samples for shipment
• Unpack and store supplies received from various vendors
• Manage inventory of all supplies used for raw material processing, commercial production, and shipping
• Preventative Maintenance and minor repairs of production and facility equipment
• Log maintenance records into the database

Skills on Resume: 

• Equipment Operation (Hard Skills)
• Remote Processing (Hard Skills)
• Equipment Setup and Maintenance (Hard Skills)
• Cleaning (Hard Skills)
• Packaging and Shipping (Hard Skills)
• Inventory Management (Hard Skills)
• Maintenance and Repairs (Hard Skills)
• Record Logging (Hard Skills)

Job Summary: 

• Be a member of the Technical Resources Group
• Support either a 2nd or 3rd shift, with a focus on quality, yield, and on-time delivery.
• Report to the Maintenance Supervisor and support all areas of manufacturing.
• Support all areas of manufacturing during 2nd or 3rd shift operation
• Support assembly(Cleanroom)-die dicing and pick and place, solder and epoxy die attach, wire bonding, die forming
• Support test and Finish-thermal, mechanical and electrical testing, laser mark, tinning, lead trimming, and forming.
• Support SMT and Module mechanical assembly
• Provide equipment/production line down troubleshooting and repair, PMs, in addition to documenting and reporting the equipment/production line down conditions
• Report any corrective actions taken and repairs made to the Process Engineering and Maintenance Groups, to facilitate the creation of long-term corrective actions
• Assist in maintaining the factory-wide escalation procedure and participate in the facility-wide ongoing 5-S program

Skills on Resume: 

• Technical Support (Hard Skills)
• Shift Support (Soft Skills)
• Manufacturing Assistance (Hard Skills)
• Cleanroom Assembly (Hard Skills)
• Testing and Finishing (Hard Skills)
• Troubleshooting and Repair (Hard Skills)
• Corrective Action Reporting (Soft Skills)
• 5-S Participation (Soft Skills)

Job Summary: 

• Evaluate problems using validated systematic troubleshooting methods (8D), diagnose equipment problems, and implement solutions
• Use the applicable equipment tracking system to obtain equipment history while keeping accurate and complete records/documentation
• Accurately perform preventive maintenance and calibrations on area equipment and perform equipment qualifications according to established guidelines and procedures.
• Select and utilize proper test equipment and tools following standardized procedures and guidelines while staying up to date on process and equipment procedures
• Monitor equipment performance data and identify and correct deviations utilizing accepted practices or expectations
• Extract data from applicable sources and ensure the reliability of data
• Measure process metrics and identify equipment inaccuracy or inefficiency and communicate trends in equipment performance
• Keep work areas clean and organized (6S), participate in TPM and 6S
• Promote equipment and process improvements
• Continue to acquire technical knowledge and maintain required certifications
• Remain actively involved in quality improvement and utilize data or other information to uphold improvements
• Assist with experiments or equipment evaluations to reduce inefficiencies
• Assist with process experiments and qualifications, as well as new and converted equipment qualifications

Skills on Resume: 

• Troubleshooting (8D) (Hard Skills)
• Equipment Diagnostics (Hard Skills)
• Maintenance and Calibration (Hard Skills)
• Equipment Qualification (Hard Skills)
• Data Monitoring (Hard Skills)
• Metrics Measurement (Hard Skills)
• 6S and TPM (Soft Skills)
• Continuous Learning (Soft Skills)

Job Summary: 

• Utilize the suggestion program to drive improvements                   
• Adopt and follow a shift-left mentality
• Connect with suppliers, peers, and customers to accurately relay technical information
• Serve as an area representative for all issues associated with owned tools or processes by documenting changes and area specifications
• Coordinate with multiple areas on assignments by identifying partners and communicating relevant information
• Chip in meetings and communicate lessons learned and use best-known methods across Micron sites
• Provide updates on project status and generate report summaries for Technical Roadmaps and/or justification for new technology evaluation
• Provide business and technical information to purchasing personnel as it relates to vendors (SQN)
• Provide and receive pass-downs
• Communicate with production to relay problems, changes, or request information
• Provide feedback observations and data to the engineering groups to help resolve chronic problems or experiments
• Actively share information with others to raise the level of awareness and knowledge in the department, site, or larger industry groups
• Utilize all opportunities to mentor, train, and increase the skill level of other team members

Skills on Resume: 

• Process Improvement (Soft Skills)
• Shift-Left Mentality (Soft Skills)
• Technical Communication (Soft Skills)
• Documentation Management (Hard Skills)
• Cross-Department Coordination (Soft Skills)
• Project Status Reporting (Hard Skills)
• Vendor and Purchasing Coordination (Soft Skills)
• Mentoring and Training (Soft Skills)

Job Summary: 

• Execute work order requests managed through the computerized maintenance management system (CMMS)
• Perform preventive maintenance and assist with calibration of equipment and systems at scheduled intervals.
• Regularly inspect and assess operating conditions of assigned equipment and analyze trends to improve preventative and prescriptive maintenance plans.
• Diagnose problems with building facilities, utilities, and equipment.
• Assist with installation of equipment, adhering to basic safety and maintenance procedures for new equipment.
• Communicate and coordinate work with outside contractors and service companies.
• Maintain spare parts inventory, communicating with manufacturers and vendors to obtain replacement and change parts needed to ensure minimal interruption in equipment function.
• Record all preventative maintenance, repairs, or other equipment services in appropriate document or digital format following Good Documentation Practices and GMP records retention.

Skills on Resume: 

• CMMS Management (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Equipment Inspection and Analysis (Hard Skills)
• Problem Diagnosis (Hard Skills)
• Equipment Installation (Hard Skills)
• Contractor Coordination (Soft Skills)
• Spare Parts Inventory Management (Hard Skills)
• Documentation and GMP Compliance (Hard Skills)

Job Summary: 

• Set up an effective system of recording and monitoring defects and breakdown reports to take remedy and immediate actions to minimize shutdown times.
• Develop and implement Preventive, Corrective, and Predictive Maintenance improvement framework to minimize maintenance, repair, and replacement costs and abate the risk of critical equipment breakdown or interruption.
• Ensure that the personnel working in this team have acquired the right skills, are given proper training, and are up-to-date with the latest methods, procedures, and requirements.
• Support production activities at all times by ensuring minimum response times to equipment breakdowns and achievement of equipment availability targets
• Lead emergency (unscheduled) repairs or first-level troubleshooting of facilities critical equipment.
• Working with specialized equipment, such as programmable logic controllers (PLC) -Siemens, Omron Perform Robot I/O configuration, loading programs, diagnosing errors/faults, as well as Servo drive programming.
• Plan and execute reliability improvement projects for critical equipment focused on new technology development, evaluation, and application to both existing and emerging risks.
• Supervise external vendor maintenance and repair on critical equipment.
• Provide feedback and give suggestions to improve equipment stability and performance.
• Manage stock and supplies of critical equipment spare and replacement parts.

Skills on Resume: 

• Defect Reporting (Hard Skills)
• Maintenance Framework (Hard Skills)
• Training and Development (Soft Skills)
• Equipment Support (Soft Skills)
• Emergency Troubleshooting (Hard Skills)
• PLC and Robot Configuration (Hard Skills)
• Reliability Projects (Hard Skills)
• Vendor Management (Soft Skills)

Job Summary: 

• Calibration on various equipment sets as assigned throughout the facility
• Preventive maintenance on various equipment sets as assigned throughout the facility Generate and maintain maintenance documentation and schedules electronically, following appropriate ISO procedures for all critical equipment
• Procure and maintain equipment spares as applicable by working with various vendors and purchasing
• Works closely with Engineering to optimize equipment sets and work to drive continuous improvements
• Assisting in the development and implementation of the next-generation equipment maintenance
• programs encompassing the entire manufacturing operation
• Assisting in the development of maintenance training programs and delivering training
• Coordinate the efforts of the machine operators and maintenance personnel to ensure compliance with the established maintenance program
• Adhere to the General Requirements of Team Members
• Responsible for the proper handling and management of hazardous waste generated in their work area

Skills on Resume: 

• Equipment Calibration (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Maintenance Documentation (Hard Skills)
• Equipment Spare Procurement (Hard Skills)
• Equipment Optimization (Soft Skills)
• Maintenance Program Development (Hard Skills)
• Training Program Development (Soft Skills)
• Hazardous Waste Management (Hard Skills)