Job Summary: 

• Training and mentoring of junior Engineers
• Determinate Customer Instrumentation and Control contract requirements and delivery dates
• Create an Instrumentation procurement schedule
• Create Instrument technical specifications and Request for Quotes
• Instrument loop creation and maintenance
• Data sheet creation for instrumentation
• Drawing creation for instrumentation
• Responsible for all design input documents in the creation of an I/O list
• Maintenance of GT control logic and Graphic screens
• Resolution of customer comments on all responsible drawings
• Creation and maintenance of I&C procedures and checklists
• Collaborating with design engineers, operations engineers, purchasers, sales and marketing and other internal staff
• Liaising with clients, suppliers, contractors, project management and other relevant authorities within cost and time-constrained environments
• Interpret and apply applicable codes like ISA, ANSI/NEMA, NFPA, AGA, etc.

Skills on Resume: 

• Training Mentoring (Soft Skills)
• Contract Management (Hard Skills)
• Procurement Scheduling (Hard Skills)
• Technical Specifications (Hard Skills)
• Loop Maintenance (Hard Skills)
• Data Sheets (Hard Skills)
• Control Logic (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Establish and document standard design processes and products
• Simplify product designs for improved manufacturability and reduce cost without compromising product quality and function
• Develop schedules, coordinate and manage projects of all sizes with minimal supervision
• Meet regularly with vendors and ensure that all technical and schedule requirements are met
• Utilize SmartPlant Instrumentation (SPI) to design the instruments database
• Successfully develop wiring diagrams, cable schedules, cable lists, Instrument lists/data sheets/index and other I&C documents best suited for extraction from a database-type tool like SPI
• Conduct Factory Acceptance Tests (FATs) for instrumentation
• Supporting Field Operations in performing on-site installation of instrumentation
• Provide start-up commissioning, operations and/or troubleshooting support for equipment failures, determine root cause analysis and implement the solution
• Creation and maintenance of all supporting Instrument documentation
• Maintenance of Gas Turbine Control Logic documentation
• Support Project Engineering in addressing all Customer GT instrumentation and control logic questions
• Training and mentoring of junior Engineers
• Support Instrumentation and Controls Design for new Product Development, Modular Design for Gas Turbine, and apply cost-down methods

Skills on Resume: 

• Process Standardization (Hard Skills)
• Design Optimization (Hard Skills)
• Project Management (Soft Skills)
• Vendor Coordination (Soft Skills)
• Database Design (Hard Skills)
• Documentation Development (Hard Skills)
• Commissioning Support (Hard Skills)
• Team Mentoring (Soft Skills)

Job Summary: 

• Lead the design, development, modification, and review of nuclear instrumentation, process instrumentation, and digital and analog control system designs, including distributed control systems (DCS), programmable logic controllers (PLC), and data acquisition systems (DAQ)
• Work collaboratively with other engineering disciplines, procurement, operations, and quality assurance to specify, select, and ensure the timely delivery and installation of I&C equipment from a large variety of vendors and suppliers
• Provide expertise or support in the areas of control system design, human system interface (HIS) development, human factors engineering (HFE), verification and validation (V&V), and cyber security
• Prepare instrument specifications, calculations, and test plans to support the design, new construction, testing, commissioning, in-field troubleshooting and operation of the future SHINE medical isotope production facility
• Maintain and perform fault diagnosis across systems and ownership of QMS functions
• Perform both the day-to-day routine requirements, scheduled and unscheduled planned preventative maintenance tasks
• Ensure that compressed air systems and multiple water systems are maintained as per their validated status
• Extensive experience in producing, checking and approving Instrument/Control design document deliverables
• Review and Checking / Approval of GID (Kolkata Design Office) instrument design deliverables
• Liaise with cross-discipline departments and equipment package vendors to ensure a coherent interface into the Worley EI&C design
• Recognise and address potential and actual cross-discipline issues and conflicts so that overall design input to the project is coherent
• Managing own and others' project work scope, updating project programme timescales, and manhour/resource estimates
• Initiate and maintain EI&C policy documents and procedures, templates, etc.

Skills on Resume: 

• Control Systems (Hard Skills)
• Vendor Coordination (Soft Skills)
• Cyber Security (Hard Skills)
• Testing Commissioning (Hard Skills)
• Fault Diagnosis (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Design Documentation (Hard Skills)
• Project Management (Soft Skills)

Job Summary: 

• Responsible for the Controls and Instrument Engineering and Design for all projects and ensure that the system is safe, reliable, and delivered on time
• Work with the Project Engineer to design systems to supply and control Fuel, Combustion Air, Instrument Air, Steam, Water, and other streams to proprietary equipment for safe and functional operation, including P&IDs
• Supporting documentation to ensure that instrumentation and process control equipment meet the defined process and operational requirements
• Generate Logic diagrams and operating control narratives
• Test and commission control systems
• Provide controls and instrument support to Customers during plant installation, inspection, commissioning, start-up and ongoing operation
• Assist sales engineers with proposals, cost estimates, and documentation
• Responsible for design, specification and services related to control systems, including basic process control systems, safety systems, control panels, analyser systems, telecommunications, field instrumentation, and valves, etc.
• Evaluate, select, and apply standard engineering techniques, procedures, and criteria, using judgment in making minor adaptations and modifications
• Engineer and design modifications to existing Automation Control Cabinets
• Generate engineering drawings, procurement documentation, and project documentation using information received from the JSC site team
• Attend Factory Acceptance Testing

Skills on Resume: 

• System Design (Hard Skills)
• Process Control (Hard Skills)
• Logic Diagrams (Hard Skills)
• Testing Commissioning (Hard Skills)
• Customer Support (Soft Skills)
• Cost Estimation (Hard Skills)
• Engineering Documentation (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Model at the facility level, the control design following Internal User Requirements, technical specs, Functional Design Spec, integrated factory acceptance test (IFAT), site acceptance test (SAT) and handover docs
• Defining the I&C functional requirements, cascading the requirements from key safety inputs to ensure safety case compliance
• Responsible for updating the I&C data package and associated documentation for HVAC and distribution systems to ISO 17873
• Design and operation of ventilation systems for nuclear installations
• Read and interpret machinery and plant drawings, electrical schematics, maintenance manuals, and parts catalogues to enable customer requirements to be met
• Monitoring and inspecting project activities to ensure delivery to programme, budget, scope, and quality requirements
• Monitor contractor performance to ensure all construction activities are completed in line with Health, Safety and Environmental requirements
• Examining the feasibility of projects in conjunction with Asset Management, as part of the project appraisal procedure
• Liaise with Capital Programmes at the pre-construction stage, providing input to the design review process, undertaking constructability and gate budget reviews
• Participate in the tendering processes and tender document preparation
• Contributing to the support and operation of the SCADA/DCS systems
• Liaise with Consultants and Third Parties 

Skills on Resume: 

• Control Design (Hard Skills)
• Safety Compliance (Hard Skills)
• Documentation Management (Hard Skills)
• Ventilation Systems (Hard Skills)
• Drawing Interpretation (Hard Skills)
• Project Monitoring (Soft Skills)
• Contractor Oversight (Soft Skills)
• SCADA Support (Hard Skills)

Job Summary: 

• Creating, maintaining, testing, reviewing and documenting code
• Collaborating in a cross-functional team on software for MS and related technologies
• Acting as a technical expert for coding, process, and best practices and effectively communicating this to development teams on-site and globally
• Working within and across teams to improve working practices and skill level
• Maintaining the effectiveness of the Quality system at the site via adherence to applicable policies and procedures
• Design of new measurement and control systems, including high-speed data acquisition
• Integration of IT systems, including networks, data movement and storage
• Development of bespoke intranet-based web applications using ASP.NET/C#/T-SQL
• Design, development, and deployment of key business systems, including software, databases and analysis
• Aircraft to engine controller interface communication and simulation systems, including flight support
• Requirements capture, analysis, and the preparation of system specifications
• Design, monitor, and acceptance of third-party supplied systems

Skills on Resume: 

• Software Development (Hard Skills)
• Cross-Functional Collaboration (Soft Skills)
• Technical Leadership (Soft Skills)
• Quality Compliance (Hard Skills)
• Control Systems (Hard Skills)
• IT Integration (Hard Skills)
• Database Development (Hard Skills)
• System Specifications (Hard Skills)

Job Summary: 

• Provide electrical process controls engineering and data integration services, including developing project scope, planning, procuring, and managing engineering projects
• Work with all levels of Plant personnel to identify and assess equipment and process problems and define requirements to help address engineering problems and needs
• Manage engineering projects from conception to completion
• Provide a wide variety of engineering and data integration services from project specification through design, implementation, training and support
• Maintains proper controls documentation, including cause and effect diagrams, controls narratives, and network drawings
• Supports a wide range of communications protocols, networks, and radio telemetry, including Ethernet I/O, Device Level Rings, Ethernet Radios, Serial Radios, Modbus and OPC
• Assists with establishing Key Processing “Best Practices” to improve profitability, including operating conditions, hardware change recommendations, monitoring process conditions, and unit performance reporting/comparison
• Direct and coordinate the work performed in the department by engineering consultants and contractors
• Direct and coordinate the work performed by operating employees for new equipment installations or testing to ensure conformity to engineering design and specifications
• Plan and execute the preventive maintenance plans to ensure safe, reliable and efficient operation of the facilities
• Work with the maintenance superintendent and lead the technicians to execute the maintenance activities for the I&C parts
• Develop and implement a plant improvement plan
• Assess the need for Instrumentation and Control spare parts to avoid delays in the total preventive maintenance

Skills on Resume: 

• Project Scope (Hard Skills)
• Problem Solving (Soft Skills)
• Project Management (Soft Skills)
• Documentation Control (Hard Skills)
• Network Protocols (Hard Skills)
• Best Practices (Soft Skills)
• Maintenance Planning (Hard Skills)
• Team Leadership (Soft Skills)

Job Summary: 

• Develop customized radiation detectors and measurement signal chains for instrumentation and control applications at nuclear power plants and other facilities generating or handling radioactivity
• Lead structured product development process with effective project management of complex projects with multiple stakeholders and objectives
• Coordinate and communicate all project technical issues with the client, with occasional visits to customer facilities for business development, design reviews, and commissioning
• Coordinate with multifunctional internal/external teams regarding hardware, software, mechanical, test, manufacturing, procurement, sales, service and quality issues
• Prepare technical proposals and document compliance with customers’ requirements and specifications
• Analyze the simulation of the measurement range, response time and measurement accuracy
• Prepare piping and instrumentation drawings (P&ID), I&C loop diagrams, assembly drawings, BOMs, modified electronic schematics, procurement/fabrication drawings and specifications
• Prepare functional and calibration test procedures for the instrument, signal chain loop, and factory/site acceptance
• Prepare qualification test plans and reports for EMC, environmental test, seismic and primary calibration
• Prepare customer installation instructions/drawings and operating manual
• Supervise the project’s development, reviews, production, test and qualification

Skills on Resume: 

• Radiation Detection (Hard Skills)
• Project Management (Soft Skills)
• Client Communication (Soft Skills)
• Team Coordination (Soft Skills)
• Technical Proposals (Hard Skills)
• Simulation Analysis (Hard Skills)
• P&ID Design (Hard Skills)
• Testing Procedures (Hard Skills)

Job Summary: 

• Ensure compliance with the preventive/predictive maintenance plan on IE and control equipment
• Ensure the timely intervention of operational equipment in case of failure (corrective maintenance)
• Coordinate multidisciplinary teams of root cause analysis in the area of IE and control
• Prepare technical reports related to preventive and corrective actions
• Prepare the scope of work for the IE and control projects to be contracted according to the annual plan
• Ensure efficient supervision and leadership over the I/E department team
• Develop an on-site training plan for the IE team
• Ensure proper coaching and mentoring for the IE team
• Ensure compliance with the policies and regulations of the company's health, safety and environment
• Ensure compliance and ethical policies of the company
• Propose and develop plant improvement projects
• Participate in the annual maintenance plan elaboration
• Examine needs for new equipment, calculate costs and help prepare budgets

Skills on Resume: 

• Maintenance Planning (Hard Skills)
• Corrective Actions (Hard Skills)
• Root Cause Analysis (Hard Skills)
• Technical Reporting (Hard Skills)
• Project Scoping (Hard Skills)
• Team Leadership (Soft Skills)
• Training Mentoring (Soft Skills)
• Plant Improvement (Soft Skills)

Job Summary: 

• Attend the clarification meetings with the bidders for the resolution of pre-bid queries
• Prepare and submit to the owner for approval, the evaluation procedure of the offers submitted by bidders
• Ensure compliance with the scope of work
• Recommend the improvements to be added to the offers
• Review design basis and philosophy
• Review system control and sub-systems configuration and specification (hardware/software and architecture) and PLC requirements
• Review of Control Room and technical rooms layouts Plan
• Review and comment on the DCS system and P&IDs
• Review and comment on System ESD Emergency Shutdown
• Review and comment on the Fire Gas System (FGS)
• Review of instrument requirements and specification/ data sheets

Skills on Resume: 

• Bid Evaluation (Hard Skills)
• Scope Compliance (Hard Skills)
• Design Review (Hard Skills)
• System Configuration (Hard Skills)
• PLC Requirements (Hard Skills)
• Layout Review (Hard Skills)
• Safety Systems (Hard Skills)
• Specification Analysis (Hard Skills)

Job Summary: 

• Review of instrument sizing calculations
• Review and assess change requests of the EPC contractor and evaluate and recommend to the Owner
• Monitor the performance of the engineering for compliance with the schedule and inform the Owner of appropriate actions to be taken
• Review of instrumentation for package equipment
• Review of layouts (control rooms, cable layout, etc.) and low meters and meter proving system
• Control the vendors' list of EPC contractors to ensure it is consistent with the project’s policies and meets quality standards
• Review of Material Requisitions, Bid evaluation and Technical Bid Analysis, Purchase Requisition and Vendor data/document
• Review of the manufacturer’s deviations
• Review site fabrication and erection activities, etc.

Skills on Resume: 

• Instrumentation Review (Hard Skills)
• Change Evaluation (Hard Skills)
• Schedule Monitoring (Hard Skills)
• Package Equipment (Hard Skills)
• Layout Review (Hard Skills)
• Vendor Management (Hard Skills)
• Bid Analysis (Hard Skills)
• Site Inspection (Hard Skills)

Job Summary: 

• Determine the hardware and software requirements for utility-scale renewable generation projects, evaluate alternatives, and make recommendations
• Provide field assistance in the installation of the project
• Complete diligence of third-party specifications and designs, reviewing for adherence to Company requirements and specifications
• Design and install a renewable energy center control system and related networks
• Incorporate cybersecurity defenses and strategies into the design
• Develop and influence a standard approach to network and cybersecurity design for control system networks in collaboration with personnel who design such networks for other Ameren energy centers
• Develop and maintain Company-specific design guidelines and technical specifications for renewable generation projects
• Complete designs and analysis for renewable generation communication and control systems with emphasis on adherence to Company standards, procedures, and policies
• Provide technical assistance and direction to other personnel completing designs and analysis of renewables projects
• Review documentation for a permanent record of completed field work

Skills on Resume: 

• Requirement Analysis (Hard Skills)
• Field Installation (Hard Skills)
• Design Review (Hard Skills)
• Control Systems (Hard Skills)
• Cybersecurity Design (Hard Skills)
• Network Standards (Hard Skills)
• Technical Assistance (Soft Skills)
• Documentation Review (Hard Skills)

Job Summary: 

• Review construction plans from outside sources for potential conflicts and recommend actions to prevent or remove conflicts
• Perform planning and engineering analysis of renewable generation communication and control systems to identify capacity or operational deficiencies
• Develop projects to correct and improve the safe and reliable operation of systems
• Assist in the coordination of large engineering projects
• Participate in project development, planning, implementation, and completion
• Work collaboratively with other Company departments to ensure safe and reliable generation to meet stakeholder expectations and commitments
• Effectively utilize and provide technical support relating to the use of the renewable generation communication and control systems
• Identify and implement improvements in renewables generation engineering designed to control costs and improve productivity and reliability
• Research and evaluate new industry-wide developments and best practices
• Determine the company's renewable generation standards and maintain professional expertise

Skills on Resume: 

• Conflict Resolution (Soft Skills)
• System Analysis (Hard Skills)
• Project Development (Hard Skills)
• Project Coordination (Soft Skills)
• Team Collaboration (Soft Skills)
• Technical Support (Hard Skills)
• Process Improvement (Hard Skills)
• Industry Research (Hard Skills)

Job Summary: 

• Performing all work in accordance with the Kent Quality Management and Health, Safety and Security System and within agreed time and schedule constraints
• Participation as Principal Instrumentation and Control Engineer in Multidiscipline Studies for the Early Phases (Feasibility, Option Selection, Concept Studies) in the development projects
• Leadership of Projects and Teams as part of the Instrumentation and Control engineering capability within the office
• Liaison with clients, developing and maintaining customer relationships and fee-earning opportunities
• Liaison with suppliers and contractors
• Liaison with the other disciplines, clients’ engineering and production personnel, to ensure a consistent basis for all input parameters
• Coordination of Instrumentation and Control Engineering Studies
• Report and specification writing
• Definition of development options and parameters for cost estimates
• Documentation of assumptions and assessment of development risks for each option
• Testing and commissioning of the Instrumentation and Control plant

Skills on Resume: 

• Quality Compliance (Hard Skills)
• Feasibility Studies (Hard Skills)
• Project Leadership (Soft Skills)
• Client Relations (Soft Skills)
• Supplier Coordination (Soft Skills)
• Engineering Coordination (Soft Skills)
• Report Writing (Hard Skills)
• Testing Commissioning (Hard Skills)

Job Summary: 

• Assist with the overall control system network design
• Work with an instrument database or similar tool to develop an instrument index, I/O list, instrument data sheets, etc.
• Select instrumentation for process control applications
• Assist in instrument sizing calculations for valves, flowmeters, etc.
• Assist process and mechanical engineers with P&ID development by adding I&C symbols to depict the intent of the design
• Create control panel drawings to include panel layout, panel wiring, and bill of materials
• Develop loop drawings and control wiring drawings to depict I&C circuitry
• Create instrument location plans and instrument installation details
• Coordinate with architects and electrical engineers to locate control panels and ensure appropriate control power is provided for I&C devices and panels
• Develop I&C construction specifications
• Follow projects after construction documents are issued and review submittals, answer RFIs, and make field visits to verify that the construction of the I&C scope is proceeding per the intent of the design

Skills on Resume: 

• Control System Design (Hard Skills)
• Instrument Database (Hard Skills)
• Instrument Selection (Hard Skills)
• Sizing Calculations (Hard Skills)
• P&ID Development (Hard Skills)
• Control Panel Design (Hard Skills)
• Loop Drawings (Hard Skills)
• Construction Coordination (Soft Skills)

Job Summary: 

• Develop customized radiation detectors and measurement signal chains for instrumentation and control applications at nuclear power plants and other facilities generating or handling radioactivity
• Lead structured product development process with effective project management of complex projects with multiple stakeholders and objectives
• Coordinate and communicate all project technical issues with the client, with occasional visits to customer facilities for business development, design reviews, and commissioning
• Coordinate with multifunctional internal and external teams regarding hardware, software, mechanical, test, manufacturing, procurement, sales, service and quality issues
• Specify and describe the suitability of the system design approach using existing qualified instruments, development of new or modified hardware and software, and integration of third-party equipment (electronics, electrical controls, fluid controls, communication and mechanical structures) in order to meet customer application requirements
• Ensure application requirements include radiation measurement performance, qualification tests and analyses, quality assurance inspection and measurements, and deliverable documentation
• Prepare technical proposals and document compliance to customers’ requirements specifications
• Analyze the simulation of the measurement range, response time and measurement accuracy
• Prepare piping and instrumentation drawings (P&ID), I&C loop diagrams, assembly drawings, BOMs, modified electronic schematics, procurement and fabrication drawings and specifications
• Prepare functional and calibration test procedures for the instrument, signal chain loop, factory and site acceptance
• Prepare qualification test plans and reports for EMC, environmental test, seismic and primary calibration
• Prepare customer installation instructions and drawings and operating manual
• Supervise the project’s development, reviews, production, test and qualification

Skills on Resume: 

• Radiation Detection (Hard Skills)
• Project Management (Soft Skills)
• Client Communication (Soft Skills)
• Team Coordination (Soft Skills)
• System Integration (Hard Skills)
• Technical Documentation (Hard Skills)
• Simulation Analysis (Hard Skills)
• Test Procedures (Hard Skills)

Job Summary: 

• Review project technical specification, identify relevant and applicable sections, select and prepare equipment and component specifications for instrumentation, control and protection system design and panel fabrication
• Prepare key engineering documents such as schematics and drawings required for the assembly and installation of instrumentation and control panels, marshalling cabinets and junction boxes, instrument lists, cable lists, parts bills and bill of material (BOM) in relation to project technical specifications and applicable codes
• Prepare technical specifications and support the purchasing process by participating in the selection, negotiations and technical discussions with suppliers and subcontractors
• Prepare and document test procedures and system validations and participate in factory and site acceptance tests
• Review and apply the engineer's seal to technical documentation produced under supervision
• Coordinate with the mechanical engineering teams for generator, turbine, piping and water gate systems and the customer for the integration of instruments with their applicable equipment, define cable pathways, including embedded conduits and blockouts in walls
• Support the installation and commissioning of hydro-electric generators and related electrical equipment at the work site from the engineering office
• Provide technical support to the sales team in preparing technical documentation and drawings for bids
• Participate in program initiatives aimed at reducing direct and indirect design costs and process streamlining to improve efficiency

Skills on Resume: 

• Specification Review (Hard Skills)
• Engineering Drawings (Hard Skills)
• Supplier Negotiation (Soft Skills)
• System Validation (Hard Skills)
• Technical Documentation (Hard Skills)
• Team Coordination (Soft Skills)
• Site Commissioning (Hard Skills)
• Process Improvement (Soft Skills)

Job Summary: 

• Lead the extra-low voltage systems design on assigned large-scale projects during the tender, design, procurement, construction, commissioning, and until the final client acceptance phase
• Design control systems, instrumentation, cabling and cable support systems for process equipment, industrial facilities and commercial buildings, with the support of the lead engineer
• Design life safety systems comprising public address systems, access control, closed-circuit, gas detection and fire alarm systems, with the support of a lead engineer
• Design information technology cabling systems with the support of a lead engineer
• Develop P&IDs, instruments and IO list, sequence of operations, logic diagrams, cause and effect matrices, with the support of the lead engineer
• Develop, execute and expedite ELV packages during design, procurement, and construction phases of a project and take responsibility for the assigned packages
• Coordinate and schedule activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates
• Interface with other trades during the design phase and incorporate their requirements into the ELV systems design
• Evaluate vendor submissions technically, including approval of shop drawings

Skills on Resume: 

• ELV Design (Hard Skills)
• Control Systems (Hard Skills)
• Life Safety (Hard Skills)
• IT Cabling (Hard Skills)
• P&ID Development (Hard Skills)
• Package Management (Hard Skills)
• Activity Coordination (Soft Skills)
• Vendor Evaluation (Hard Skills)

Job Summary: 

• Prepare the procedure for testing and commissioning of individual systems and manage subcontractors during the commissioning of the extra-low voltage systems
• Guide ELV engineers, designers and draftsmen in preparing cable routing plans, hookup drawings, wiring drawings, cable schedules, junction box schedules, instrument air manifold schedule, block diagrams, P&IDs, and control system schematic
• Prepare extra-low voltage system tender packages, including specifications and drawings
• Be responsible for ensuring familiarity with the latest country codes, current practices and engineering trends within the industry
• Perform tendering and estimating of the extra-low voltage system works for projects before award
• Prepare technical bid evaluations and recommendations during project execution
• Adhere to the corporate and project quality management system
• Liaise with clients, consultants, equipment vendors and suppliers to ensure compatibility of design interfaces during construction activity
• Compile and review the operation and maintenance dossier for projects

Skills on Resume: 

• Commissioning Management (Hard Skills)
• Team Guidance (Soft Skills)
• Tender Preparation (Hard Skills)
• Code Compliance (Hard Skills)
• Cost Estimation (Hard Skills)
• Bid Evaluation (Hard Skills)
• Quality Management (Hard Skills)
• Client Liaison (Soft Skills)

Job Summary: 

• Prepare control systems (DCS and PLC), continuous emissions monitoring systems (CEMS) and instrument contracts
• Perform control system retrofits and migrations
• Develop detailed scope documents to identify how the upgrade or migration will be executed
• Prepare instrumentation design deliverables, including instrument list, instrument construction specifications, instrument installation details, and instrument location plans
• Develop piping and instrumentation diagrams (P&IDs) and equipment subcontract package specifications
• Prepare instrument and control system specifications, instrument and instrument valve data sheets, request for quotation (RFQ) and technical bid summaries
• Design control system logic and configuration, graphic interfaces, and input/output (I/O) lists
• Manage vendor I/O and instrument lists, coordinate I/O to determine partitioning of the control system hardware
• Verify and perform design calculations, project studies and report preparation
• Develop specifications and site study for design of systems, assist with P&ID design, including instrumentation and related mechanical design
• Evaluate technical bids and manage vendor contracts
• Review and approve vendor drawings
• Perform factory acceptance tests, control wiring design, and logic design
• Provide technical assistance during commissioning at the project site
• Perform quality reviews of project submittals
• Ensure compliance with company and site safety policies

Skills on Resume: 

• Control Systems (Hard Skills)
• System Retrofits (Hard Skills)
• Scope Development (Hard Skills)
• Instrumentation Design (Hard Skills)
• P&ID Development (Hard Skills)
• Logic Configuration (Hard Skills)
• Vendor Management (Soft Skills)
• Quality Review (Hard Skills)

Job Summary: 

• Develop appropriate I&C systems for a technology research center, including strategic vision, design review, maintenance, monitoring, and optimization
• Develop control systems projects within all degrees of complexity, ensuring compliance and adherence to accepted industry best practices
• Develop special procedures involving I&C controls, including maintenance and management of control systems, executing changes to configurations, graphics, control loops, shutdown systems, etc.
• Initiate, develop, and implement strategies for applying new and enhancements to existing technologies to improve operational safety and efficiency
• Provide technical support to engineering, maintenance, operations, and projects personnel regarding selection, operation, maintenance, troubleshooting and long-term reliability of the research facility
• Perform hands-on work and manage parts procurement
• Review and recommend changes to the plant complex loops and alarm list to improve infrastructure reliability
• Review and approve site-related I&C equipment design and engineering matters submitted by the client
• Review technical specifications for repairs to existing equipment or procurement of new equipment
• Consult with subject matter experts and provide input to the development and implementation of solutions to equipment-related and reliability issues
• Provide necessary support to guide the timing, planning, and execution phases of plant shutdowns and turnarounds
• Review research equipment operating parameters and initiate technical discussions and research to ensure optimal operability
• Identify projects, supported with written justification, for inclusion in capital expenditure budgets
• Work with contractors and outside vendors and suppliers on developing project concepts, quoting, scope of work, and cost justifications regarding projects
• Analyze equipment data, perform investigations, determine root causes, and recommend solutions
• Manage access, security and integrity of controls related to network and server systems

Skills on Resume: 

• I&C Systems (Hard Skills)
• Control Projects (Hard Skills)
• Procedure Development (Hard Skills)
• Technology Integration (Hard Skills)
• Technical Support (Soft Skills)
• Parts Procurement (Hard Skills)
• Reliability Analysis (Hard Skills)
• Vendor Coordination (Soft Skills)

Job Summary: 

• Oversee and lead the design section for the project to ensure that designs are in accordance with project time, budget and technical requirements
• Lead and mentor less experienced engineers through the project
• Provide coaching and guidance to less experienced staff to increase the technical expertise of people, as well as knowledge of systems and procedures
• Be accountable for the quality of deliverables of the discipline design section in line with the needs of the customer and regulatory authorities
• Be responsible for the production and review of engineering deliverables, including models, drawings, calculations, specifications, reports, and evaluations
• Set man-hour budgets for engineering and drafting and recommend engagement of additional manning 
• Monitor the progress and performance of project discipline teams, give input and provide feedback and support 
• Review the feasibility studies documentation and estimates
• Provide feedback to the project engineering manager on design progress, budget and schedule
• Provide technical support to the onsite construction teams, the projects department and the estimating department

Skills on Resume: 

• Design Oversight (Hard Skills)
• Team Mentoring (Soft Skills)
• Staff Coaching (Soft Skills)
• Quality Assurance (Hard Skills)
• Engineering Deliverables (Hard Skills)
• Budget Planning (Hard Skills)
• Performance Monitoring (Soft Skills)
• Technical Support (Soft Skills)

Job Summary: 

• Provide facility leadership in understanding and addressing process safety risk through knowledge, equipment, and reliability improvements
• Investigate, evaluate, analyze, and implement engineering solutions to solve operations and control system problems
• Be responsible for control loop performance monitoring, tuning, and optimization
• Lead the effort to develop new and update existing design of model-based control applications
• Identify and implement income improvement opportunities through process control and optimization applications
• Participate in reliability initiatives such as alarm rationalization analysis, alarm metric tracking, and other industry best practices
• Provide mentorship to other technical team members on process control practices and troubleshooting
• Support the processing hazards analysis (PHA) and layer of protection analysis (LOPA) initiative across the site
• Utilize documentation systems and workflows to update and maintain instrument and control system specifications and drawings
• Champion the management of change (MOC) process for instrumentation and control system changes
• Provide process control expertise for capital projects by defining instrumentation and control strategies and control narratives to ensure flawless project startup and commissioning efforts

Skills on Resume: 

• Process Safety (Hard Skills)
• Problem Solving (Soft Skills)
• Loop Optimization (Hard Skills)
• Model Control (Hard Skills)
• Process Optimization (Hard Skills)
• Reliability Initiatives (Hard Skills)
• Team Mentorship (Soft Skills)
• Change Management (Soft Skills)

Job Summary: 

• Lead an instrumentation and controls (I&C) design team through all phases of design, including feasibility and concept development, preliminary design, detailed design, and construction documentation
• Write the I&C scope and prepare estimates for all design phases of a project
• Assist in control system philosophy and control system architecture development in coordination with the client and process requirements
• Develop I&C design documents for biotech and pharmaceutical facilities, including control panel layouts and wiring diagrams
• Coordinate with process engineers to generate instrument data sheets
• Provide technical guidance and direction to the project team
• Coordinate with multiple disciplines in 2D and 3D environments for panel locations, in-line instruments, and power to control panels
• Prepare specifications for panel fabrication and instrumentation and control system requirements for packaged equipment
• Coordinate with the systems integrator
• Perform field surveys and evaluate the condition of existing equipment and systems
• Review submittals and shop drawings
• Respond to construction requests for information (RFIs), develop final construction documents, including plans, specifications, schedules, and details
• Prepare specifications for I&C equipment
• Prepare I&C design criteria and basis of design documents
• Help to establish a culture of technical excellence through role modelling and communicating expectations
• Establish effective working relations with colleagues, clients and officials

Skills on Resume: 

• Design Leadership (Soft Skills)
• Scope Estimation (Hard Skills)
• System Architecture (Hard Skills)
• Design Documentation (Hard Skills)
• Technical Guidance (Soft Skills)
• Multidisciplinary Coordination (Soft Skills)
• Field Surveys (Hard Skills)
• Client Relations (Soft Skills)

Job Summary: 

• Design small-scale gas measurement, monitoring, control, and field SCADA systems in conformance with company standards, AGA and API codes, field conditions, and within budget constraints
• Prepare cost estimates and purchase equipment for measurement, monitoring, and control applications
• Manage small to medium-scale field SCADA construction projects, coordinate with outside contractors, company employees, and customers
• Implement strategies to replace obsolete equipment and upgrade stations and equipment to meet company and governing body standards
• Provide technical assistance to various departments to implement control and measurement, operating and maintenance procedures
• Configure and operate various types of electronic equipment, including EFC, RTU, transmitter, telecommunications equipment, controllers, and test equipment
• Provide technical assistance to operations and other internal customers in areas of measurement, monitoring, and control
• Test and evaluate new measurement, monitoring, control, and telecommunications equipment

Skills on Resume: 

• SCADA Design (Hard Skills)
• Cost Estimation (Hard Skills)
• Project Management (Soft Skills)
• Equipment Upgrades (Hard Skills)
• Technical Assistance (Soft Skills)
• Equipment Configuration (Hard Skills)
• Operations Support (Soft Skills)
• Equipment Testing (Hard Skills)

Job Summary: 

• Provide technical assistance to field operations problems during and after normal working hours
• Prepare monthly and annual reports by the department or regulatory agencies
• Actively seek and incorporate feedback from internal stakeholders related to job performance and support
• Maintain customer-focused working relationships with operations and engineering partners
• Align individual objectives with department goals and projects to ensure that corporate needs and objectives are met
• Maintain awareness of the impact that decisions have on capital and O&M budgets and recommend best cost alternatives to meet budgetary constraints
• Attend schools and conferences relating to functions performed by the department, including RTU programming, instrumentation, measurement, control, telecommunications, and job-specific equipment utilized by the company
• Comply with operating company, state, and federal regulations

Skills on Resume: 

• Field Support (Soft Skills)
• Report Preparation (Hard Skills)
• Stakeholder Feedback (Soft Skills)
• Customer Relations (Soft Skills)
• Goal Alignment (Soft Skills)
• Cost Awareness (Hard Skills)
• Continuous Learning (Soft Skills)
• Regulatory Compliance (Hard Skills)

Job Summary: 

• Provide controls and I&C solutions by providing design and layout of building HVAC management and control systems in accordance with acceptable engineering and industry practices
• Develop BMS control system drawings, P&IDs, I/O lists, and narratives or sequences of operations for HVAC control systems
• Perform field investigations of existing conditions and develop project design basis, design and approach, technical specifications, equipment selection, including valve sizing and instrument specification
• Perform construction administration support of BMS design including submittal reviews, RFI responses, system checkout and startup, punch list, and as-built documentation
• Support O&M operational facility issues with investigation and troubleshooting for BMS-related issues
• Complete projects promptly per established workflow schedules
• Attend weekly team meetings to coordinate interdisciplinary design issues
• Support the discipline group with the development of BMS and controls standards and specifications

Skills on Resume: 

• HVAC Controls (Hard Skills)
• BMS Design (Hard Skills)
• Field Investigation (Hard Skills)
• Construction Support (Hard Skills)
• Issue Troubleshooting (Soft Skills)
• Project Delivery (Soft Skills)
• Team Coordination (Soft Skills)
• Standards Development (Hard Skills)

Job Summary: 

• Work as an instrumentation and controls member of a multi-disciplinary design team with project teams in multiple offices
• Develop control strategies, provide input to P&IDs, control system specifications, termination diagrams, and commissioning plans
• Design, specify, and integrate complete automation systems, including PLC, HMI, DCS, and communication networks
• Participate in control panel design and generation of bill of materials, cabling, PLC and HMI programming, and commissioning for commercial and industrial facilities
• Perform FAT, pre-commissioning, and commissioning activities
• Ensure that all work is properly checked in accordance with applicable standards and procedures
• Collect field information, equipment specifications, drawing development, material take-offs, cost estimate input, schedule input, HAZOP participation, code review, technical studies, report preparation, commissioning, and operator and maintenance staff training
• Prepare instrumentation and controls construction work packages
• Coordinate activities with project managers and technical engineers of all disciplines
• Be responsible for adhering to all health and safety policies and guidelines

Skills on Resume: 

• Control Strategies (Hard Skills)
• Automation Systems (Hard Skills)
• Panel Design (Hard Skills)
• System Commissioning (Hard Skills)
• Field Data (Hard Skills)
• Work Packages (Hard Skills)
• Team Coordination (Soft Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Perform routine engineering work requiring application of standard techniques, procedures and criteria
• Assist in the review and approval of contractor plans, including goals and objectives, work breakdown structure, detailed scope descriptions, detailed schedules, risk management approach, and budgets
• Produce quality work products that meet or exceed customer expectations and conform to company standards and procedures
• Obtain input from internal sources on jobs that may have similar scope and specifications
• Provide input to others concerning their project needs
• Provide technical direction, serve as a point of contact or business liaison, prepare briefings for senior management and assist in problem resolution specific to the program or project
• Participate in project teams and all activities related to the development of new products
• Provide technical support to sales and marketing for bids and proposals
• Review company standards and guidelines, stay current and apply them, and get peers to review work
• Complete task assignments within established budgets and schedules
• Monitor own progress against budget and schedule
• Notify the project engineer and project manager of budget and schedule impacts and problems
• Explain project specifications in a clear and concise manner

Skills on Resume: 

• Engineering Practices (Hard Skills)
• Plan Review (Hard Skills)
• Quality Delivery (Hard Skills)
• Knowledge Sharing (Soft Skills)
• Technical Direction (Soft Skills)
• Team Participation (Soft Skills)
• Sales Support (Soft Skills)
• Budget Monitoring (Hard Skills)

Job Summary: 

• Review and develop piping and instrumentation diagrams (P&IDs) in conjunction with process and mechanical engineers
• Select, apply, and specify the instrumentation required to support processes
• Develop instrument data sheets and lists, panel layouts, and details
• Arrange instrumentation and control equipment on plan drawings and create single-line diagrams
• Develop sequences of operation for processes in conjunction with process and mechanical engineers
• Verify that the design is consistent with industry-accepted practice, leading-edge technologies, and special client-preferred features
• Controls and systems engineering experience involving DCS, PLC, MES, SCADA, bus technologies, Ethernet/IP
• Produce and review 2D and 3D design drawings for high technology facilities in accordance with project requirements, codes, specifications, and procedures
• Be responsible for coordination and multidisciplinary clash checking, including the resolving of issues using Navisworks
• Conduct site surveys of existing services to ascertain as-built conditions
• Complete engineering studies and reports
• Participate in services during construction activities, including reviewing RFIs, submittals, responding to design change notices, issuing field change bulletins, attending site walk-throughs, and issuing field observation reports, developing operational and functional acceptance tests, developing record drawings, and producing other system documentation
• Understand and work within the scope, schedule, deliverables, and man-hours budgeted for assigned tasks
• Support, by active participation, corporate and discipline-specific procedures and policies
• Contribute to the development of the discipline's knowledge base and standards
• Attend self-improvement seminars and courses and professional society meetings in areas of focus
• Provide guidance to more junior-level team members 

Skills on Resume: 

• P&ID Development (Hard Skills)
• Instrumentation Selection (Hard Skills)
• Panel Layouts (Hard Skills)
• Operation Sequences (Hard Skills)
• Control Systems (Hard Skills)
• Design Drawings (Hard Skills)
• Site Surveys (Hard Skills)
• Team Guidance (Soft Skills)

Job Summary: 

• Lead and support the site’s instrument integrity and reliability program
• Develop instrument PM tasks and establish frequencies for execution
• Develop and maintain written procedures, checklists, and acceptance forms to test and document that instrument and control loops are performing correctly
• Lead and support the development and enhancement of the AMS Device Manager for HART-smart instruments and field devices
• Optimize utilization of the tool and technology for instrument, control valve, and control loop integrity and predictive maintenance
• Perform root cause failure analysis on instrumentation and control valves
• Be responsible for ensuring site is leveraging the most effective, economical, and reliable technologies to meet business and customer needs
• Participate in a larger community of practices in these areas and integrate their work at the site
• Contribute towards the execution of I&C scopes for projects and reliability improvement initiatives, including PI implementation and digital transformation programs, by ensuring timely and adequate subject matter expertise support
• Assure compliance and adherence to processes, industry codes and standards, quality systems, policies, and contractual requirements
• Provide timely support to the operations and maintenance team in troubleshooting of malfunctions and complex repairs
• Work with maintenance, operations and plant engineering to determine alternatives and provide guidance during problem analysis
• Work to find the best fit for purpose solution that supports the needs of the business
• Provide input for planning and scheduling of the plant outages and turnarounds
• Identify control improvement opportunities and advanced control opportunities that align with business goals for operating plants
• Ensure safety controls are performing per design and participate in functional safety work

Skills on Resume: 

• Instrument Reliability (Hard Skills)
• PM Development (Hard Skills)
• Procedure Documentation (Hard Skills)
• Device Management (Hard Skills)
• Failure Analysis (Hard Skills)
• Technology Optimization (Hard Skills)
• Team Support (Soft Skills)
• Safety Compliance (Hard Skills)

• Control system architecture and wiring design, including the communication protocols, such as Ethernet, ASI, Modbus/TCP, and Profibus DP/PA
• Develop instrumentation and controls design documents, including instrument spec sheets, URSs, and functional specifications
• Develop control narratives, sequence of operations, and test procedures for instrumentation
• Perform instrumentation, including valves and actuators evaluation, design and selection
• Develop instrumentation installation design and configuration with knowledge of Class I, Div. I and II explosion-proof and intrinsically safe requirements
• Develop technical and design criteria, process and instrumentation diagrams (P&IDs), SCADA block diagrams, control schematics, panel layout diagrams, and interconnection diagrams
• Provide competency-specific guidance on electrical, instrumentation, and process control systems to all operations
• Participate in design reviews for all capital projects, including new facilities and changes to existing processes, to support and drive project delivery
• Manage and maintain change management procedures for all control environments across operations
• Perform loop checks, continuity tests, factory acceptance tests, site acceptance tests, start-up support, and performance tests for process control systems
• Support and troubleshoot existing DeltaV DCS to minimize downtime and loss of production, provide after-hours technical support to second and third shifts, including weekends
• Coordinate with colleagues in other engineering and scientific disciplines on multi-disciplinary projects
• Build strong relationships with operations, technical support, and facilities to deliver standardized processes
• Coordinate with equipment vendors and contractors on projects

Skills on Resume: 

• System Architecture (Hard Skills)
• Design Documentation (Hard Skills)
• Control Narratives (Hard Skills)
• Instrumentation Selection (Hard Skills)
• Installation Design (Hard Skills)
• Design Reviews (Soft Skills)
• Change Management (Soft Skills)
• System Troubleshooting (Hard Skills)

Job Summary: 

• Plan and own the delivery of instrumentation and control systems designs
• Lead and contribute to the preparation of proposals and bids for projects
• Provide creative solutions to fit the needs of clients and communities
• Coordinate the work of the team, mentor less experienced team members
• Fulfill the instrument and control systems engineering needs for a wide variety of industrial and municipal clients
• Provide design and engineering for projects and proposals to ensure that the design and equipment meet customer specifications and industry codes and standards
• Participate in a multi-disciplinary environment in determining the instrumentation, controls and process automation requirements
• Develop detailed engineering packages to represent installation requirements for process control systems and instrumentation
• Verify the accuracy and completeness of all deliverable products and services in assigned areas of responsibility

Skills on Resume: 

• Design Delivery (Hard Skills)
• Proposal Preparation (Hard Skills)
• Creative Solutions (Soft Skills)
• Team Mentoring (Soft Skills)
• Client Support (Soft Skills)
• Engineering Design (Hard Skills)
• Multidisciplinary Coordination (Soft Skills)
• Quality Assurance (Hard Skills)

Job Summary: 

• Perform quality checking and provide design guidance for all 2D and 3D CADD drafting and design
• Prepare and check instrument loop diagrams, as well as control systems cabinets design and wiring
• Participate in design reviews, HAZOPs, and SILA or LOPAs
• Prepare and check hook-up, installation and instrument or fire and gas location plans
• Perform instrument engineering, including instrument selection, specification, and inline device sizing calculations
• Prepare and guide the preparation of control system (BPCS, ESD, F&G, etc.) design, procurement and implementation
• Support in the development of piping and instrumentation diagrams (P&IDs)
• Review project documents for scope, presentation, and technical accuracy
• Develop material requisitions for field instruments, automated valves, control systems and completion of technical bid evaluations
• Review and approve vendor documents
• Develop control narratives and cause and effect diagrams or SDKs
• Support in providing estimates for engineering work
• Interface and approve mechanical equipment packages on behalf of the instrumentation and controls department's scope of work
• Provide field support to on-site personnel and the construction management team
• Assist in providing technical support to engineering groups at the site
• Interface with various engineering disciplines, suppliers, and other areas of the company
• Manage assigned work effectively, including prioritizing, executing, managing the schedule and budget, and reporting to meet project goals
• Complete weekly and monthly progress reporting to the client, along with bi-weekly schedule reviews

Skills on Resume: 

• Design Guidance (Hard Skills)
• Loop Diagrams (Hard Skills)
• Design Reviews (Soft Skills)
• Instrument Engineering (Hard Skills)
• Control Systems (Hard Skills)
• P&ID Support (Hard Skills)
• Vendor Management (Soft Skills)
• Field Support (Soft Skills)

Job Summary: 

• Interpreting and understanding P&IDs, generating control system architecture based on mechanical and process requirements (control narrative, flow charts, IO list, interlocks, safety zones, operator interface, networking, schematics, etc.)
• Designing industrial communication systems (Modbus, Fieldbus, Ethernet/IP, Profibus, DeviceNET)
• Specifying process control instrumentation
• Designing installation, such as equipment layout, cable trays, and instrumentation mounting
• Specifying motor controls and drives
• Designing 600V, 480V or 120/208V distribution as it pertains to industrial processes
• Planning and executing FATs and SATs, installation, commissioning and testing new equipment and processes
• Working with an established multi-disciplinary integrated technical team of engineers, technologists, and support staff to carry out studies, develop design documents, and provide services during construction

Skills on Resume: 

• P&ID Interpretation (Hard Skills)
• System Architecture (Hard Skills)
• Industrial Networking (Hard Skills)
• Installation Design (Hard Skills)
• Motor Controls (Hard Skills)
• Power Distribution (Hard Skills)
• System Commissioning (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Process instrumentation design, specification, and procurement oversight
• Design control systems for pumps, valves, heat exchangers, steam turbines and reactors to improve the functionality of the client’s plant
• Assist operations and simulator teams in resolving I&C design issues
• Assist project management leadership in developing detailed schedules and resolving planning issues for I&C design activities
• Develop operability determinations and functionality assessments on plant systems and components
• Assist the plant procedure group with procedure reviews, developing and reviewing procedures, and resolving procedure issues
• Use existing procedures to investigate, evaluate and assist in producing technically correct and cost-effective design changes or recommendations that solve ongoing problems
• Interface with other workgroups (e.g., system engineering, operations, maintenance, radiation protection, simulators)
• Build relationships that facilitate knowledge transfer, cross-functional knowledge of related work groups, and the ability to present work products effectively
• Gather and correlate basic engineering data using well-defined engineering procedures, which may include routine and diagnostic testing of components and systems, and engineering studies to support plant troubleshooting
• Assist in a variety of topics, including developing innovative procedures, improved design recommendations, or new or better equipment purchase recommendations
• Prepare and review design change packages and design calculations (e.g., load flow, short circuit, protective device coordination, etc.) in accordance with company policies and procedures

Skills on Resume: 

• Instrumentation Design (Hard Skills)
• Control Systems (Hard Skills)
• Issue Resolution (Soft Skills)
• Schedule Planning (Soft Skills)
• System Assessment (Hard Skills)
• Procedure Review (Hard Skills)
• Design Changes (Hard Skills)
• Cross Functional (Soft Skills)

Job Summary: 

• Contract to direct position for an instrumentation and controls engineer for operations, maintenance and capital project management in a process plant environment
• Work closely with the site electrical and instrumentation engineer and contractor resources for electrical maintenance support of operations
• Drive continuous improvement in the documentation and execution of the site's mechanical integrity program
• Manage programs including arc flash, grounding and bonding, IR thermal imaging and preventive maintenance
• Identify opportunities for instrumentation and control improvements that will increase productivity, increase process repeatability, reduce cost, and reduce the risk of employee exposure
• Develop, justify and implement projects
• Support the site's efforts directed at the development and implementation of an automation strategy to drive improvements in process control
• Provide engineering support for the development of capital projects
• Support the site officer of automation security to develop and manage related policies and procedures
• Identify, evaluate and make recommendations regarding new process control technologies
• Participate in and lead teams in support of optimizing plant processes for quality, cost, reliability and productivity
• Develop, execute and manage small capital projects

Skills on Resume: 

• Plant Operations (Hard Skills)
• Maintenance Support (Soft Skills)
• Mechanical Integrity (Hard Skills)
• Program Management (Hard Skills)
• Process Improvement (Soft Skills)
• Project Development (Hard Skills)
• Automation Strategy (Hard Skills)
• Team Leadership (Soft Skills)

Job Summary: 

• Design, develop and implement automation projects
• Develop process control requirements
• Develop and implement process control solutions
• Proactively identify and implement new automation concepts and technologies to achieve general objectives
• Propose recommendations for continuous improvement by utilizing knowledge regarding process equipment and chemical processes
• Develop a plant and site automation strategy
• Integrate safety, cGMP, environmental, quality and other regulatory requirements into all projects
• Lead integration of new automation technology in capital projects
• Manage conflicting priorities in multiple projects
• Independently identify activities needed to complete a project successfully
• Make independent decisions in the absence of direct or functional supervision
• Identify and resolve problems innovatively and creatively as they relate to plant and site automation
• Initiate, design, qualify and implement large automation projects
• Be responsible for identifying computerized systems guidelines, standards and procedures for development or revision
• Participate in the prioritization and selection of projects
• Implement site standards for instrumentation and control systems

Skills on Resume: 

• Automation Projects (Hard Skills)
• Process Control (Hard Skills)
• Continuous Improvement (Soft Skills)
• Automation Strategy (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Technology Integration (Hard Skills)
• Project Management (Soft Skills)
• Problem Solving (Soft Skills)

Job Summary: 

• Act as SME for instrumentation-related issues in systems throughout the campus
• Provide design review for new implementation and legacy system modifications
• Analyze trends and failure rates to identify bad actors and recommend solutions
• Serve as process automation lead, liaison between automation and engineering and projects
• Provide alarm management services to determine effective alarm rationalization
• Troubleshoot issues from the I/O card to the instrumentation, including the transmitter and cabling
• Participate and act as the I&C main point of contact for CAPEX and OPEX projects throughout the campus
• Compile engineering life cycle documentation for electrical-related projects

Skills on Resume: 

• Instrumentation Expertise (Hard Skills)
• Design Review (Hard Skills)
• Failure Analysis (Hard Skills)
• Automation Leadership (Soft Skills)
• Alarm Management (Hard Skills)
• Issue Troubleshooting (Hard Skills)
• Project Support (Soft Skills)
• Lifecycle Documentation (Hard Skills)

Job Summary: 

• Provide technical expertise and leadership in control system engineering, design, implementation, programming and configuration, commissioning, testing and troubleshooting in support of power plant controls and industrial control systems, including distributed control systems (DCS) and programmable logic controller systems (PLC), along with associated control system devices, computers, communications, networks and instrumentation
• Provide support and leadership to meet regulatory and cybersecurity requirements for projects, initiatives and activities relative to controls and control systems
• Provide technical support for power generation and auxiliary power systems, particularly related to digital devices or systems with communications interface to control systems (e.g., protective relays for electrical power systems)
• Develop technical deliverables for clients, including engineering evaluations, operability evaluations, problem resolution, I&C upgrade feasibility studies and conceptual design documents
• Provide technical direction and project management for I&C projects in various market sectors including nuclear, federal government, health and life sciences
• Provide analysis and modeling capabilities for I&C systems, such as in the development of simulator algorithms
• Effectively interface with clients to understand their problems and challenges, develop technical proposals to address their problems, and effectively present proposals and company capabilities
• Assist in identifying industry opportunities for I&C services and partnerships to support client needs and provide input to the planning for the growth of I&C services
• Identify, analyze and resolve system design weaknesses
• Provide leadership and mentoring to employees

Skills on Resume: 

• Control Systems (Hard Skills)
• Cybersecurity Compliance (Hard Skills)
• Power Systems (Hard Skills)
• Technical Deliverables (Hard Skills)
• Project Management (Soft Skills)
• System Modeling (Hard Skills)
• Client Engagement (Soft Skills)
• Team Mentoring (Soft Skills)

Job Summary: 

• Perform basic calculations such as instrument air consumption, voltage drop, standard cases of control valves, relief valve sizing, flow element sizing and thermowells vibration calculations under the supervision of a more senior engineer
• Solve problems using well-established scientific principles
• Make decisions and solve problems based on experience
• Analyze data and understand the relationships and correlations
• Draw conclusions and present findings to senior leadership
• Be proactive about learning new information and skills
• Initiate development of personal objectives aligned with those of the organization
• Seek feedback and use it effectively
• Utilize codes and standards to complete assignments
• Identify the customer both internally and externally
• Handle various assignments, including rework, in a timely manner to meet schedule deadlines
• Perform assigned work efficiently and effectively to maximize productivity
• Perform quality checks of the design in a team environment to ensure accuracy
• Carry out assignments carefully while focused on details
• Follow policies, procedures, and safety guidelines at work

Skills on Resume: 

• Engineering Calculations (Hard Skills)
• Problem Solving (Soft Skills)
• Data Analysis (Hard Skills)
• Report Presentation (Soft Skills)
• Continuous Learning (Soft Skills)
• Standards Application (Hard Skills)
• Detail Orientation (Soft Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Perform basic calculations under the supervision of a more senior engineer
• Seek out more experienced engineers for guidance and expertise
• Identify problems and their level of complexity
• Review P&IDs and mechanical equipment lists to develop electrical load lists and one-line diagrams
• Expand knowledge through training and work experience
• Learn codes and standards to complete assignments
• Perform non-routine technical assignments of limited scope
• Perform tasks according to company procedures, industry codes and regulations

Skills on Resume: 

• Basic Calculations (Hard Skills)
• Engineer Guidance (Soft Skills)
• Problem Identification (Soft Skills)
• Diagram Development (Hard Skills)
• Knowledge Expansion (Soft Skills)
• Standards Learning (Hard Skills)
• Technical Assignments (Hard Skills)
• Procedure Compliance (Hard Skills)

Job Summary: 

• Develop and review control system architecture, flow diagrams, process and instrumentation diagrams (P&IDs), control sequences and design specifications
• Analyze risks and hazards and conduct risk analyses
• Create responsibility matrices, instrument indexes, bills of material (BOMs) and other project tools
• Develop and review wiring schematics and control panel layout drawings
• Program and integrate human machine interfaces (HMIs) and programmable logic controllers (PLCs), including offerings from Allen Bradley, Siemens, GE, Wago, etc.
• Design, set up, and perform system functionality tests on equipment in the manufacturing facility and at customer sites
• Develop wire pull schedules and scope of work documents for contractors to use in bidding and construction
• Perform onsite startup and validation of equipment
• Perform I/O checkout and troubleshooting, calibrate instrumentation and tune PID loops
• Validate programming to confirm systems operate per control sequences

Skills on Resume: 

• System Architecture (Hard Skills)
• Risk Analysis (Hard Skills)
• Project Tools (Hard Skills)
• Wiring Schematics (Hard Skills)
• PLC Programming (Hard Skills)
• System Testing (Hard Skills)
• Startup Validation (Hard Skills)
• Loop Tuning (Hard Skills)

Job Summary: 

• Apply engineering knowledge and general engineering principles in support of developing and integrating instrumentation and controls into equipment and services
• Develop automation and control systems and processes, including instrumentation specification, system architecture, control narratives and PID loops
• Apply instrumentation and control engineering knowledge in support of system integration with variable frequency drives, single board computers and programmable logic controllers
• Support continued improvements in data collection, processing and equipment control logic, including specification and integration for process sensors, transmitters, actuators and analytical instruments for applications related to equipment and services
• Assist with larger engineering projects, working as part of a team
• Keep abreast of engineering developments, trends, equipment and processes and advise the line manager if these could be applied to improve current work practices, equipment and products
• Produce, check and approve engineering documentation
• Carry out other duties as and when business requirements dictate, as may be reasonably expected by the line manager

Skills on Resume: 

• I&C Integration (Hard Skills)
• Automation Systems (Hard Skills)
• System Integration (Hard Skills)
• Data Improvement (Hard Skills)
• Team Collaboration (Soft Skills)
• Trend Awareness (Soft Skills)
• Documentation Review (Hard Skills)
• Business Support (Soft Skills)

Job Summary: 

• Create functional and design specifications for application software in cooperation with customers
• Develop application software, operator human machine interface and specific configuration in the Ovation environment
• Assist under supervision in several project phases, including system configuration, application programming, internal testing and simulation, factory acceptance tests (FAT), system installation, I/O checkout and functional testing
• Prepare proper documentation of the application software
• Assist with application questions and issues from customers
• Perform assigned tasks and duties with balanced risk while strictly observing the business ethics of the organization
• Follow and observe all company procedures and trainings related to the operation controls, including but not limited to trade compliance, checkpoint, records retention, quality management system and ethics
• Develop personal and professional competencies as well as knowledge about products and services

Skills on Resume: 

• Specification Writing (Hard Skills)
• Software Development (Hard Skills)
• System Testing (Hard Skills)
• Documentation Preparation (Hard Skills)
• Customer Support (Soft Skills)
• Ethical Compliance (Soft Skills)
• Procedure Adherence (Hard Skills)
• Skill Development (Soft Skills)

Job Summary: 

• Lead EIC engineering efforts through all phases of plant projects, including conceptual, feasibility, scope definition, cost estimates, functional requirements, system design, scheduling, procurement, construction, testing, commissioning, startup and validation
• Develop manufacturing equipment, processes and procedures essential to line extensions, product improvements and new product development
• Manage project scope, schedule and finances to meet predetermined business objectives
• Utilize technical materials such as equipment manuals, system drawings, P&IDs, schematics and blueprints to troubleshoot and repair complex electrical and control systems
• Interpret industry, regulatory and company specifications and standards and apply them to projects
• Implement building and equipment installations to improve manufacturing competitive performance
• Work in a participative team-based environment using world-class operations processes and principles, plan and lead the design and implementation of medium to large sized projects, programs and manufacturing improvement projects that include the integration of outside technical resources
• Support system startup and operational checkout on systems including configuration, wiring, calibration and power testing
• Provide hardware and software application support assistance to engineers and operations
• Provide significant contributions and technical leadership for major technology efforts in the organization, either as an individual or team member
• Provide technical analysis, project cost and schedule estimation, engineering effort forecasting, design recommendations, preparation of design and equipment specifications, design, review of design documents, development of construction subcontract documents, and lead construction, commissioning and startup activities at plant facilities

Skills on Resume: 

• Project Leadership (Soft Skills)
• Process Development (Hard Skills)
• Scope Management (Soft Skills)
• System Troubleshooting (Hard Skills)
• Standards Application (Hard Skills)
• Installation Implementation (Hard Skills)
• Team Collaboration (Soft Skills)
• Startup Support (Hard Skills)

Job Summary: 

• Participate in site investigations to gather information about the client’s systems, equipment and instruments to develop project plans and cost estimates to proactively maintain and upgrade the system
• Develop process logic for programmable logic controllers (PLCs) used in the monitoring and control of water and wastewater treatment systems
• Design graphical screens that represent process equipment and instrumentation in the human machine interface (HMI) software packages used by clients
• Design graphical screens for the operator interface terminals (OITs) utilized in SCADA systems
• Create automated reports, via specialized reporting software, to collect process information monitored by the SCADA system for use by the client or submission to regulatory agencies
• Participate in the installation, oversight of contractors and guidance in wiring terminations, checkout and modification of the field wiring associated with the equipment and instruments connected to the SCADA system
• Configure and calibrate instrumentation, including level, pressure, flow, temperature, process analyzers and more, and connect to the SCADA system
• Configure and commission industrial networking hardware, including Ethernet switches, wireless access points and licensed frequency radios
• Participate in the testing and startup of the process equipment, instruments and SCADA system to ensure the SCADA system monitors and controls the equipment as intended
• Train operations personnel on the use, maintenance and troubleshooting of the SCADA system hardware, software and installation
• Participate in QA/QC activities for both the design deliverables produced by the design team and the code developed by the controls team

Skills on Resume: 

• Site Investigation (Hard Skills)
• PLC Programming (Hard Skills)
• HMI Design (Hard Skills)
• SCADA Graphics (Hard Skills)
• Report Automation (Hard Skills)
• Instrumentation Calibration (Hard Skills)
• Network Configuration (Hard Skills)
• Operator Training (Soft Skills)

Job Summary: 

• Support product and application presentation to potential and existing customers
• Participate in brainstorming of ideas and special projects, including implementation
• Provide technical support to the sales team and assist in identifying and highlighting potential issues
• Participate and contribute in project management involving costing, bill of material (BOM), including third-party products, scheduling and related activities
• Perform project and systems configuration and coordination
• Prepare routine engineering drawings and specifications
• Provide technical support by utilizing configuration and sizing tools
• Prepare the system for trial at the customer site
• Build a system for customers and bring it for trial purposes
• Prepare the initial first-time procurement of BOM
• Carry out the assembly, function test, factory acceptance test and related documentation prior to delivery
• Program and pre-set product before delivery, documenting and archiving them
• Perform onsite product and system commissioning, troubleshooting and servicing, and in-house troubleshooting of technical-related issues
• Set up demo units for training and exhibition
• Prepare product and system for customer evaluation
• Develop standard system solutions that have high cross-selling potential
• Pursue continuous improvement of engineering know-how to add value to the order-winning team
• Support sales directives and tactics (SD&T) implementation

Skills on Resume: 

• Customer Presentation (Soft Skills)
• Idea Generation (Soft Skills)
• Sales Support (Soft Skills)
• Project Management (Soft Skills)
• System Configuration (Hard Skills)
• Engineering Drawings (Hard Skills)
• Product Commissioning (Hard Skills)
• Continuous Improvement (Soft Skills)

Job Summary: 

• Perform instrumentation and control system engineering design for industrial, manufacturing and utilities projects
• Prepare specifications, including calculations for flow meters, analyzers, transmitters and other field instruments, with an understanding of area classification and standard wiring practices
• Perform control system studies including troubleshooting existing control systems, new system conceptual design and control system retrofits
• Develop controls and instrumentation engineering documentation including detailed instrument specifications and selection, logic diagrams, loop sheets, instrument lists, I/O lists and instrumentation plan drawings
• Supervise and coordinate instrumentation and controls engineering and design efforts on multi-discipline engineering projects
• Provide field support, including on-site design, technical support, commissioning and construction management
• Provide project management for projects that are primarily instrumentation and controls in nature
• Provide training and mentoring of junior-level instrumentation and controls engineers and designers

Skills on Resume: 

• System Design (Hard Skills)
• Instrument Specification (Hard Skills)
• Control Studies (Hard Skills)
• Engineering Documentation (Hard Skills)
• Team Supervision (Soft Skills)
• Field Support (Soft Skills)
• Project Management (Soft Skills)
• Staff Mentoring (Soft Skills)

Job Summary: 

• Partner with the design and engineering team to provide I&C input during the design phase
• Review and approve submittals with respect to I&C designs
• Ensure site-wide coordination of I&C design solutions
• Review and approve I&C specifications
• Review and participate in 3D model reviews of the facility and large equipment modules, work with master planners in assessing the degree of I&C progress and accessibility
• Partner with the process engineering team and automation team to establish proper instrument data, ranges, spare parts and related requirements
• Partner with the calibration team to establish calibration procedures and ranges, as well as support troubleshooting
• Manage instrumentation data in DCS, BMS and CMMS systems
• Coordinate with internal and external partners and stakeholders to ensure alignment across the site
• Ensure deliverables meet all quality and compliance standards
• Propose and implement changes within the I&C area of responsibility

Skills on Resume: 

• Design Input (Hard Skills)
• Submittal Review (Hard Skills)
• Design Coordination (Soft Skills)
• Specification Review (Hard Skills)
• Model Review (Hard Skills)
• Calibration Support (Hard Skills)
• Data Management (Hard Skills)
• Stakeholder Coordination (Soft Skills)

Job Summary: 

• Provide project and electrical, instrumentation and controls engineering support on capital projects within the plant
• Develop front-end project scopes, estimates and schedules for early-stage project approval
• Prepare or manage the generation of engineering package electrical, instrumentation and controls documentation, including arrangement drawings, detailed layouts and technical specifications
• Manage interaction with EPC contractors or with project teams in Denmark
• Interface with operations, maintenance and various technical disciplines when developing and resolving issues with key project requirements
• Request quotations of specific equipment and utilize SAP to generate purchase order requisitions and monitor project costs
• Plan the electrical, instrumentation and controls assembly of equipment and components, including directing the craftsmen and ensuring necessary equipment is present
• Manage construction activities and provide support for any issues that arise
• Prepare a budget for specific electrical, instrumentation and controls fields
• Prepare a schedule for specific parts of the project, as well as regular follow-up and adjustment of this schedule
• Comply with the MOC process and validate that drawing updates are made to plant files
• Ensure that all safety requirements are met by employees and contractors working on the project

Skills on Resume: 

• Project Support (Soft Skills)
• Scope Development (Hard Skills)
• Engineering Documentation (Hard Skills)
• Contractor Management (Soft Skills)
• Issue Resolution (Soft Skills)
• Cost Monitoring (Hard Skills)
• Construction Management (Soft Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Ensure compliance with applicable company HSE performance standards as well as applicable acts and regulations
• Support manufacturing excellence and uptime initiatives and ensure participation from all areas of responsibility
• Receive close direction from the manager and the senior engineer (mentor)
• Ensure that all electrical assets at the plant have effective reliability and capability life plans and maintenance strategies
• Work closely with maintenance planners to ensure that preventive and predictive maintenance work orders in SAP PM are aligned with equipment maintenance strategies
• Complete equipment failure investigations using root cause analysis techniques
• Conduct engineering statistical reliability studies from the risk assessments, criticality data, corrective maintenance history and failure history
• Assure compliance to relevant external statutory regulations and internal plant and engineering standards and communicate such requirements to the relevant stakeholders
• Ensure the application of the company's management of change policies and standards
• Implement and audit standards and guidelines in collaboration with principal engineers and operations personnel
• Undertake and organize technical investigations, inspections, studies and surveys, and analyze all historical data to determine static plant equipment risk and criticality
• Continuously update electrical items in the operational risk registers
• Implement effective controls and improvement actions including elimination and reduction
• Collaborate with operations, turnaround and project functions in the effective identification and scoping of requirements
• Execute technical R&I role during turnarounds
• Act as a responsible engineer for the management of electrical safety per the IPL standard
• Support tactical response to address equipment deficiencies in an effective and timely manner during turnarounds

Skills on Resume: 

• HSE Compliance (Hard Skills)
• Reliability Planning (Hard Skills)
• Maintenance Alignment (Hard Skills)
• Failure Analysis (Hard Skills)
• Reliability Studies (Hard Skills)
• Change Management (Soft Skills)
• Technical Investigation (Hard Skills)
• Turnaround Support (Soft Skills)

Job Summary: 

• Evaluate radiation detection equipment and develop technical specifications for it.
• Develop functional requirements for equipment maintenance and repair.
• Troubleshoot and repair instrumentation.
• Support identifying and implementing equipment upgrades.
• Author and review operating procedures and instructions for equipment.
• Perform radiological engineering calculations and oversee technical work.
• Monitor industry trends and technology improvements for implementation.
• Carry out visits to construction sites and report on observations.
• Participate in the preparation of proposals, reports, specifications and budget estimates.

Skills on Resume: 

• Equipment Evaluation (Hard Skills)
• Maintenance Requirements (Hard Skills)
• Instrumentation Repair (Hard Skills)
• Equipment Upgrades (Hard Skills)
• Procedure Writing (Hard Skills)
• Engineering Calculations (Hard Skills)
• Industry Monitoring (Soft Skills)
• Site Observation (Soft Skills)

Job Summary: 

• Finalise the obsolescence scopes and deliverables with the broader technical team and engineering technical authorities.
• Act within own discipline for review and approval of deliverables and apply sound engineering judgment to project decisions and queries.
• Technically support the management of engineering, procurement and execution contractors to safely execute deliverables of brownfields projects on time and within budget.
• Participate in system and equipment HAZID, HAZOP, constructability and other reviews.
• Manage the activities of EPCM and EP contractors, vendors and OEMs to ensure agreed project deliverables and objectives are met.
• Participate in factory acceptance testing, site acceptance testing and broader commissioning activities.
• Engage with and coordinate the implementation of the contractor.
• Research and develop management of control systems, including R&D strategy, road map development and cost management.
• Engage in technical discussion and negotiation with customers or vendors for power plant control systems and instrumentation.
• Conduct research and surveys for potential vendors of control systems and instruments in the country of the project.

Skills on Resume: 

• Obsolescence Management (Hard Skills)
• Deliverable Review (Hard Skills)
• Contractor Support (Soft Skills)
• Risk Reviews (Hard Skills)
• Vendor Management (Soft Skills)
• System Commissioning (Hard Skills)
• Control Systems (Hard Skills)
• Technical Negotiation (Soft Skills)

Job Summary: 

• Design new measurement and control systems, including high-speed data acquisition.
• Integrate IT systems, including networks, data movement and storage.
• Develop bespoke intranet-based web applications using ASP.NET, C# and T-SQL.
• Design, develop and deploy key business systems, including software, databases and analysis.
• Support aircraft to engine controller interface communication and simulation systems, including flight support.
• Capture and analyze requirements and prepare system specifications.
• Design, monitor and accept third-party supplied systems.
• Provide coordination of design efforts with other disciplines and client personnel.
• Monitor and ensure design work and documents are correct, consistent with applicable codes, logically presented and constructible.

Skills on Resume: 

• System Design (Hard Skills)
• IT Integration (Hard Skills)
• Web Development (Hard Skills)
• Business Systems (Hard Skills)
• Interface Support (Hard Skills)
• Requirement Analysis (Hard Skills)
• Design Coordination (Soft Skills)
• Quality Assurance (Hard Skills)

Job Summary: 

• Plan and be responsible for the delivery of instrumentation and control systems designs in a multi-disciplinary environment.
• Support the preparation of proposals and bids for projects.
• Provide design and engineering and creative solutions to fit the needs of clients and communities.
• Coordinate the work of the team, mentoring less experienced team members.
• Fulfill the instrumentation and control systems engineering needs for a wide variety of industrial and municipal clients.
• Develop detailed engineering packages to represent installation requirements for process control systems and instrumentation.
• Verify accuracy and completeness of all deliverable products and services in assigned areas of responsibility.
• Comprehend the criticality of system reliability, availability and outages while correctly managing the associated risks.
• Sustain and continuously improve existing systems.
• Support simultaneous multiple projects, task forces, cross-site and cross-discipline teams, and incident resolution.

Skills on Resume: 

• Design Delivery (Hard Skills)
• Proposal Support (Hard Skills)
• Creative Solutions (Soft Skills)
• Team Mentoring (Soft Skills)
• Client Support (Soft Skills)
• Engineering Packages (Hard Skills)
• System Reliability (Hard Skills)
• Project Coordination (Soft Skills)

Job Summary: 

• Develop programmable devices for custom-designed circuit cards that include FPGA and CPLD logic.
• Work with hardware and software engineers to define and implement interfaces between the microcontroller software and hardware, including the programmable devices.
• Work with hardware and software engineers to define and implement Ethernet communication links to off-the-shelf control system hardware, such as remote I/O modules.
• Work with customers, suppliers and colleagues across engineering disciplines to define project scope and requirements.
• Develop test plans and test setups in a variety of environments, from test bench to hardware-in-the-loop to on-site.
• Work as part of a multi-disciplinary team to troubleshoot customer issues and propose, test and implement solutions.
• Execute testing and commissioning of complex equipment and systems.
• Provide technical support to instrumentation and low-voltage electrical equipment preventative maintenance programs.
• Manage multiple projects with moderate complexity.
• Provide engineering support, including options analysis and selection, design, authorization for expenditure management, procurement, drawings creation, construction support, commissioning support and start-up and post start-up modifications.

Skills on Resume: 

• FPGA Development (Hard Skills)
• Interface Design (Hard Skills)
• Ethernet Communication (Hard Skills)
• Requirement Definition (Soft Skills)
• Test Planning (Hard Skills)
• Issue Troubleshooting (Soft Skills)
• System Commissioning (Hard Skills)
• Project Management (Soft Skills)

Job Summary: 

• Coordinate, engineer and review design and construction documents and drawings.
• Lead, liaise, manage, coordinate and monitor supplier and sub-contractor work activities.
• Plan, monitor and report all work activities.
• Perform detailed engineering, documentation, technical evaluation and standardize all instrumentation work processes.
• Review and enforce all safety work procedures and requirements.
• Carry out all physical project requirements, including meetings, work inspections, site supervision, testing, commissioning, training and handing over.
• Deal with client and consultant through meetings, email and presentations.
• Be responsible for designing control system schematics and generating control system specifications for a variety of projects.
• Undertake site surveys and inspections, while also undertaking tasks related to design, cost estimates and project scheduling.
• Undertake and manage instrumentation and control elements of a variety of projects within the healthcare, biopharma and data centre industries.
• Prepare instrumentation lists, data sheets and specifications.
• Liaise with, consult and coordinate clients and other members internally from design to delivery phase on projects.

Skills on Resume: 

• Design Review (Hard Skills)
• Supplier Management (Soft Skills)
• Work Monitoring (Soft Skills)
• Instrumentation Process (Hard Skills)
• Safety Enforcement (Hard Skills)
• Site Supervision (Soft Skills)
• Client Communication (Soft Skills)
• Control Schematics (Hard Skills)

Job Summary: 

• Represent the contractor in coordination with the company discipline heads and the project team for monitoring of company standards and quality
• Review any design work carried out by third parties (vendors), and participate in, and in some instances lead HAZOP, HAZID, IPF, reliability studies, safety and facilities technical audits
• Establish the actual (as opposed to design) capacities and capabilities of existing field facilities to identify potential bottlenecks and scope for optimisation
• Identify potential applications for new technology
• Prepare engineering, construction and material estimation, schedule, resource planning and update resource capacity planning half-yearly
• Collaborate with a multi-disciplinary group of scientists and engineers to ensure electrical and I&C system design and integration
• Apply engineering principles and best practices to prepare electrical design deliverables such as electrical load calculations, single-line diagrams, logic diagrams, C&E matrices, wiring diagrams, engineering reports, instrumentation and equipment specifications
• Coordinate inputs and design requirements from program management, engineering, and analysis teams to produce experimental design solutions
• Provide planning and schedule input for related design activities
• Interface with partners, suppliers, and subcontractors, provide direction and integrate their work
• Analyze maintenance records to determine instrument failure rates, availability and reliability calculations, bad actor and failure modes identification
• Develop and execute process control surveillance programs
• Collect and trend process data using the company’s multiple process historian database and visualization software tools
• Perform process control philosophy and stability reviews coupled with the execution of control logic updates and loop tuning
• Conduct criticality assessment and develop equipment strategies and maintenance plans for instrumentation and control systems, taking into consideration safety integrity level (SIL) assessment, industry standards, regulatory requirements, and manufacturer recommendations

Skills on Resume: 

• Standards Compliance (Hard Skills)
• Risk Studies (Hard Skills)
• Facility Optimization (Hard Skills)
• Technology Identification (Soft Skills)
• Resource Planning (Hard Skills)
• System Integration (Soft Skills)
• Failure Analysis (Hard Skills)
• Control Surveillance (Hard Skills)

Job Summary: 

• Prepare engineering design documentation for concept, front-end and detailed design stages of assigned projects
• Prepare or manage the design of PLC, SCADA, SIS and other process automation solutions
• Manage development, documentation, and maintenance of systems appropriate for the controls and instrumentation discipline
• Identify, assess and manage business and engineering risks, supporting a culture of zero harm and environmental responsibility
• Maintain productive relationships with all stakeholders to facilitate the delivery of asset management plans
• Guide operational sites in the development, delivery and cost management of maintenance and CAPEX plans, with regular reviews against plan and budget
• Provide technical support to enable site teams to deliver CAPEX projects, including project management, scope development, risk assessment and on-site execution
• Perform simple and routine tasks assigned at the direction of a mid or senior-level engineer using the standards set by the company, group, client, etc.
• Perform electrical engineering design, including the development of single-line diagrams, panel schedules, schematics, connection diagrams, load lists, etc.
• Correct mark-ups on drawings provided by engineers.
• Evaluate, select, and apply standard engineering methods, techniques, procedures and criteria, using independent judgment with oversight from more senior engineers.
• Develop, review and coordinate documents with suppliers, other disciplines and customers.
• Work proficiently with basic engineering deliverables such as drawings, specifications and calculations.
• Conduct document and design checking.

Skills on Resume: 

• Design Documentation (Hard Skills)
• Automation Solutions (Hard Skills)
• System Management (Hard Skills)
• Risk Management (Soft Skills)
• Stakeholder Relations (Soft Skills)
• CAPEX Support (Hard Skills)
• Electrical Design (Hard Skills)
• Document Review (Hard Skills)

Job Summary: 

• Prepare instrumentation and controls deliverables for different design phases based on P&IDs
• Prepare instrumentation specifications and user requirements for computerized control systems, standards, codes, and customer input
• Work directly with lead engineers to develop technical strategy and deliverables for biotech and pharmaceutical client projects
• Coordinate and interact effectively with project managers, vendors, and engineers across multiple disciplines, such as process engineering and MEP
• Identify deliverables, define requirements, create design documents and contribute to design reports
• Develop technical controls specifications and strategies and network architecture design
• Design, install and implement automation and electrical controls on new and existing manufacturing equipment
• Provide software and hardware design support to existing PLC and HMI implementation
• Work with a functional team to support electrical controls design for new and existing manufacturing equipment
• Identify automation projects for capacity, efficiency and safety improvements in a manufacturing environment
• Develop semi-automated and automated manufacturing processes by studying product requirements, researching, designing, modifying and testing manufacturing methods and equipment, and conferring with equipment vendors
• Support continuous improvement and automation activities

Skills on Resume: 

• I&C Deliverables (Hard Skills)
• Specification Development (Hard Skills)
• Technical Strategy (Soft Skills)
• Multidisciplinary Coordination (Soft Skills)
• Controls Design (Hard Skills)
• Automation Implementation (Hard Skills)
• PLC Support (Hard Skills)
• Process Improvement (Soft Skills)