• Act as SME for instrumentation-related issues in systems throughout the campus
• Provide design review for new implementation and legacy system modifications
• Analyze trends and failure rates to identify bad actors and recommend solutions
• Process Automation lead liaison between Automation and Framingham Engineering and Projects
• Provide alarm management services to determine effective alarm rationalization
• Troubleshoot issues from the I/O card to the instrumentation, including the transmitter and cabling
• Participate and act as the I&C main point of contact for CAPEX and OPEX projects throughout the campus
• Compile Engineering Life Cycle documentation for electrical-related projects
• Check or approve the technical specification or necessary drawings for manufacturing
• Find long-term technical solutions to lessons learned
• Communicate with all other departments for general technical issues to secure the best technical solution
• Participate in customer meetings and supplier meetings

Skills: Instrumentation Expertise, Design Review, Failure Analysis, Process Automation, Alarm Management, Troubleshooting, Documentation Preparation, Technical Communication

• Calculations for flow meters, analyzers, transmitters, and other field instruments
• Perform control system studies including troubleshooting existing control systems, new system conceptual design and control system retrofits
• Develop controls/instrumentation engineering documentation, including detailed instrument specifications and selection, logic diagrams, loop sheets, instrument lists, I/O lists, and instrumentation plan drawings
• Responsible for supervising and coordinating instrumentation/controls engineering/design efforts on multi-discipline engineering projects
• Field support, including on-site design, technical support, commissioning, and construction management
• Provide project management for projects that are primarily instrumentation/controls in nature
• Provide training and mentoring of junior-level instrumentation/controls engineers and designers
• Developing, implementing, maintaining, reviewing and optimising Reliability Management Plans (RMPs) and Strategies
• Identifying bad actors, threats and risks and capturing them in the Integrated Risk Register (IRR) and leading completion of rectification plans
• Communicating with and influencing operations and maintenance personnel to achieve reliability goals and targets
• Providing technical support to operations and maintenance teams
• Leading investigations and providing timely recommendations (defect elimination/root cause analysis)
• Providing technical support to projects

Skills: Flow Calculations, Control Studies, Engineering Documentation, Project Supervision, Field Support, Project Management, Reliability Planning, Root Cause Analysis

• Participating and promoting all aspects of refinery safety programs
• Visibly demonstrating commitment to the workplace safety and health of employees and contractors through personal engagement and sound decisions
• Initiating/Managing and/or evaluating management of changes (MOC)
• Reviewing and/or developing Instrument design packages for projects
• Providing routine maintenance, engineering and troubleshooting support for instrumentation and analyzers
• Provide turnaround support for the area, developing engineering and design packages, reviewing/approving specifications and supporting field construction through commissioning and startup
• Consistently designing and implementing solutions for bad actors and continuous improvement to drive reliability and asset improvements
• Supporting documentation systems and processes that maintain accurate I&C equipment information and drawings
• Performing and/or participating in Criticality Analysis for instrumentation and maintaining the criticality ranking for this equipment
• Identifying equipment problems and recommending appropriate measures to control, manage and correct issues
• Recommending material upgrades or changes as the situation and conditions warrant

Skills: Safety Compliance, Design Review, Troubleshooting, Turnaround Support, Continuous Improvement, Documentation Systems, Criticality Analysis, Material Upgrades

• Participating in Process Hazards Analyses for refinery process units
• Designing, recommending, and implementing new equipment solutions where justified
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for I&C equipment
• Utilizing Life Cycle Cost and Risk Analysis processes to assist with repair vs. replace decisions and infrastructure project needs
• Developing capital and expense budget requirements related to I&C system upgrades, PM programs, repairs, expansions, etc.
• Participating in lifecycle management and improvement for Safety Instrumented Systems (SIS)
• Leading and/or participating in Root Cause Analysis teams to investigate significant reliability and/or safety-related events associated with instrumentation and controls failures
• Evaluating and recommending improvements to spares inventory and storage solutions
• Participating in knowledge sharing with other sites within the company by serving as a member of the instrumentation network
• Effectively communicating and engaging with other functional groups at all levels, from craft persons and operators to refinery leadership

Skills: Process Hazards, Equipment Design, Technical Resource, Risk Analysis, Budget Planning, Safety Systems, Root Cause, Communication

• Develop, manage and maintain client relationships for existing and future opportunities
• Lead or support business development activities for automation projects
• Prepare proposals and presentations in response to sales opportunities
• Develop the scope of services and fee proposals
• Manage and take overall responsibility for I&C and SCADA projects
• Lead the I&C project team and coordinate efforts for multi-disciplinary projects
• Monitor and control project schedules and budgets
• Lead development of SCADA System master plans, studies and technical reports
• Manage HMI and PLC Application Programming Projects
• Manage large SCADA System replacement projects
• Support data-driven infrastructure and telecommunication solutions

Skills: Client Management, Business Development, Proposal Preparation, Project Leadership, Schedule Control, SCADA Planning, PLC Programming, Infrastructure Support

• Preliminary and detailed design of the Xe-100 distributed control system.
• Oversee and manage the management control system vendor.
• Develop the overall instrumentation and control architecture.
• Assist HFE engineers in developing HMI and graphics.
• Assist in developing work packages.
• Provide guidance and direction to other employees to support the production of high-quality, timely and cost-effective engineering solutions to technical problems.
• Interface directly with other design and system engineers.
• Prepare and review design packages and calculations.
• Develop instrumentation data sheets and valve data sheets.

Skills: Control System Design, Vendor Management, Instrumentation Architecture, HMI Development, Work Package Preparation, Engineering Guidance, Cross-Functional Collaboration, Technical Documentation

• Create Scope of Work documents for engineering and construction project phases, as well as instrument design criteria and equipment datasheets.
• Develop engineering man-hour and capital cost estimates for feasibility study and detailed engineering proposals.
• Manage a team of instrument designers, providing scheduling, progress monitoring and technical direction.
• Work as part of a team of instrument designers in the programming and configuration of distributed control systems (DCS), human machine interfaces (HMI) and programmable logic controllers (PLC).
• Specify and procure field instrumentation and control valves, process control system hardware and software.
• Manage and monitor costs associated with the selection, cost and installation of instrumentation and control system equipment.
• Design control system networks, including network architecture design, control system bus technologies and the selection of hardware and software components.
• Develop and review logic drawings and process control narratives.
• Provide construction and commissioning support for instrumentation and control system installations.

Skills: Scope Development, Cost Estimation, Team Leadership, DCS Programming, Instrument Procurement, Cost Control, Network Design, Commissioning Support

• Design, plan, build, and maintain electrical control and instrumentation systems.
• Draft and review control system electrical drawings for build and installation.
• Identify and procure required components for build activities.
• Manage subcontractors performing installation projects.
• Participate in the hardware build, installation, verification and maintenance activities.
• Maintain company-wide electrical design standards.
• Troubleshoot issues with launch facility instrumentation and control systems.
• Author work instructions for new hardware installation, preventive, and corrective maintenance items.
• Plan and oversee preventive maintenance and upgrades of instrumentation and control systems.
• Maintain configuration control of installed instrumentation and control systems.
• Provide day of launch engineering support for launch facility instrumentation and control systems.

Skills: Control System Design, Electrical Drafting, Component Procurement, Subcontractor Management, Hardware Maintenance, Standards Compliance, System Troubleshooting, Launch Support

• Be responsible for coordinating overall instrument and controls project engineering and design activities, concepts and communications in partnership with the process and mechanical engineering team.
• Provide instrumentation and controls engineering design and specify instrumentation and control systems for high-tech manufacturing, semiconductor fabrication, chemical processing, pharmaceutical, water and wastewater processing facilities.
• Prepare wiring and raceway routing plans, instrument data sheets, process flow diagrams (PFD), piping and instrumentation diagrams (PID), loop wiring diagrams, PLC/DCS wiring diagrams, instrument installation plans and details, logic diagrams, sequences of operation, input/output databases and additional documentation.
• Develop electrical designs from concept through construction including preparing one-line/three-line diagrams, circuit schedules and directories, equipment and raceway routing plans, lighting designs, process flow diagrams (PFD), piping and instrumentation diagrams (PID), loop wiring diagrams, logic diagrams, sequences of operation, input/output databases and construction specifications.
• Support development, administration and execution of instrumentation and control and electrical execution plans for projects.
• Apply engineering principles and practices to diverse design and design/build projects.
• Interface with customers to manage project delivery.
• Perform team building exercises for multi-disciplinary project initiation.

Skills: Project Coordination, Control Design, Documentation Preparation, Electrical Design, Execution Planning, Engineering Application, Client Management, Team Leadership

• Support and maintain the existing DCS platforms to minimize downtime and performance losses.
• Provide troubleshooting expertise to isolate problem causes and provide guidance for corrective actions, such as controls and graphics, field devices, electrical and IT platforms.
• Provide first-level support and expertise in troubleshooting field-instrumentation issues.
• Develop functional requirement specifications, control narratives and testing protocols for enhancements and fixes.
• Perform commissioning activities, including loop checks, acceptance tests and startup support.
• Participate in longer-term platform improvement efforts, including field device management solutions, alarm rationalization, enhanced control loop monitoring and high-performance graphics.
• Participate in project design reviews to ensure P&IDs, instrumentation specifications and other engineering documents meet control and automation standards.
• Implement approved process-control system change requests using the existing manufacturing automation support system.
• Develop strong relationships with operations and maintenance and deliver standardized solutions.
• Adhere to proper change management procedures such as management of change, manufacturing automation support, configuration and safety logs.
• Adopt and follow core values of safety, quality, integrity, teamwork, customer and innovation on both a personal and professional level.

Skills: DCS Support, Issue Troubleshooting, Instrumentation Support, Specification Development, Commissioning Activities, Platform Improvement, Design Review, Change Management

• Develop, coordinate and perform maintenance, calibration and automation operating procedures.
• Develop and support projects based on research, operational and facility needs.
• Support application development for machine control systems based on PLCs and SCADA environments.
• Collect and organize technical data.
• Troubleshoot to the root cause of highly complex issues.
• Participate in new construction and modification, and share best operational practices.
• Provide day-to-day support of on-site operational, maintenance and facility issues.
• Support staff training to improve site knowledge and overall team performance.
• Communicate effectively with scientists, engineers and operations staff.
• Handle competing priorities and work effectively in a fast-paced environment.
• Ensure functions are performed safely with respect to applicable regulations and company policies.

Skills: Maintenance Procedures, Project Support, PLC Programming, Data Collection, Root Cause, Construction Support, Operational Support, Staff Training

• Be responsible for technical content and quality of engineering and design deliverables for assigned projects.
• Communicate and coordinate design activities with other disciplines such as piping, civil and structural, mechanical and others.
• Assure the quality of design through design and checking reviews.
• Work with lead engineers to interpret project scope and schedule and assist in the development of design documentation including, but not limited to, size and produce specifications for instrumentation, controls, and telecommunications equipment.
• Produce and interpret demolition drawings.
• Establish or support the development of code requirements, basic design criteria and project specifications.
• Prepare installation details and specifications.
• Assist field personnel in construction and start-up support for capital projects.

Skills: Design Management, Technical Coordination, Quality Assurance, Scope Interpretation, Specification Development, Drawing Production, Code Compliance, Field Support

• Work safely and ensure appropriate safeguards are in place to mitigate hazards and prevent incidents.
• Act as controls and instrumentation engineer lead in directing and interfacing with other instrumentation and control engineers.
• Design, develop and test new control systems as well as maintain and modify existing systems.
• Provide programming development, testing and support for expert control systems, programmable logic controllers, human machine interfaces and process networks.
• Work collaboratively with design engineers, plant engineers, IS and other internal staff.
• Participate in the development, implementation and compliance of plant process network standards, liaise with consultants, contractors and suppliers.
• Engage appropriate support to ensure compliance with relevant health, safety and environmental regulations and quality standards.
• Purchase equipment specific to instrumentation, control and network systems.
• Analyze data and present findings in clear written reports.
• Learn plant operations and existing systems, including control, network and data management.
• Calibrate instrumentation, tune control loops and optimize advanced controls and expert control systems.

Skills: Safety Compliance, Team Leadership, Control Design, PLC Programming, Cross-Functional Collaboration, Standards Implementation, Data Analysis, System Calibration

• Ensure compliance with the preventive and predictive maintenance plan on instrumentation, electrical and control equipment.
• Ensure the timely intervention of operational equipment in case of failure through corrective maintenance.
• Coordinate multidisciplinary teams of root cause analysis in the area of instrumentation, electrical and control.
• Prepare technical reports related to preventive and corrective actions.
• Prepare the scope of work for the instrumentation, electrical and control projects to be contracted according to the annual plan.
• Ensure efficient supervision and leadership over the instrumentation and electrical department team.
• Develop an on-site training plan for the instrumentation and electrical team.
• Ensure proper coaching and mentoring of the instrumentation and electrical team.
• Ensure compliance with the policies and regulations of health, safety and environment.
• Ensure compliance with ethical policies.
• Propose and develop plant improvement projects.
• Participate in the annual maintenance plan elaboration.

Skills: Maintenance Compliance, Corrective Maintenance, Root Cause, Technical Reporting, Project Scoping, Team Leadership, Staff Training, Plant Improvement

• Lead instrumentation and control design for water and wastewater projects.
• Provide technical guidance and direction to engineering and technician staff.
• Develop a variety of complex engineering deliverables, including P&IDs, technical specifications, instrument schedules, I/O lists, panel layouts and instrument installation details.
• Coordinate with regional and global design teams.
• Engage in continuous learning and development of technical expertise and specialty areas.
• Participate in additional project opportunities.
• Support automation and control system master plans, studies and technical reports.
• Contribute to control system replacement and upgrade projects.

Skills: Control Design, Technical Guidance, Engineering Deliverables, Global Coordination, Continuous Learning, Automation Support, System Upgrades, Technical Reporting

• Communicate with clients for project coordination and business development.
• Review work by team members in adherence to the quality assurance program.
• Participate in HAZOPS and client review meetings.
• Develop control strategies, P&IDs, control system specifications, termination diagrams and commissioning plans.
• Work independently on instrumentation and controls design as an integrated member of an interdisciplinary design team.
• Design, specify and integrate complete automation systems including PLC, HMI, DCS and communication networks.
• Participate in control panel design and generation of bill of materials, cabling, PLC and HMI programming and commissioning for commercial and industrial facilities.
• Perform FAT, pre-commissioning and commissioning activities.
• Support project scheduling as well as the development of instrumentation and controls estimates.
• Ensure that all work is properly checked in accordance with the client and applicable standards and procedures.
• Collect field information, equipment specification, drawing development, material take-offs, cost estimate input, schedule input, HAZOP participation, code review, technical studies, report preparation, commissioning, operator and maintenance staff training.
• Coordinate with project managers and technical engineers of all disciplines.
• Adhere to all health and safety policies and guidelines.

Skills: Client Coordination, Quality Assurance, Control Strategies, Automation Systems, Panel Design, System Commissioning, Project Estimation, Safety Compliance

• Ensure adherence to safety and quality standards.
• Ensure that standard engineering specifications, procedures and practices are updated to keep up with recent technological developments.
• Control the activities of outside consultants to ensure that projects are completed on time and within the economic and other constraints of the contract.
• Review, evaluate and make recommendations to department management staff on the most qualified, technically compliant alternative bid proposals.
• Review proposed engineering design modifications developed by outside consultants or technicians within the organization to ensure the completeness and applicability of the design or drawing change.
• Review potential and existing vendors to ensure their capability of providing equipment and services that meet the requirements.
• Participate in design studies for plant operating systems and new equipment installation, and prepare specifications and engineering drawings.
• Evaluate bid packages for compliance with contract requirements.
• Investigate the need for engineering changes to existing equipment and systems.
• Prepare engineering progress reports dealing with design, construction and manufacturing activities associated with assigned projects.
• Coordinate activities of outside consultants.
• Review, prepare and maintain technical drawings, equipment lists, alarm and set point recommendations, relay settings, logic diagrams, instrument lists, I/O lists, data sheets, specifications, plans and procedures.

Skills: Safety Standards, Specification Updates, Consultant Management, Bid Evaluation, Design Review, Vendor Assessment, Design Studies, Technical Documentation

• Conduct operating or maintenance feasibility studies of complex instrumentation and control engineering conditions and systems.
• Act as a technical advisor to both the plant operation and maintenance groups on problems with systems in which there is special technical knowledge.
• Analyze instrument and control equipment failures to determine the source and preventative action.
• Make recommendations to prevent recurrence.
• Design, build and maintain network systems, which identify cyber security threats to DCS and EMCC systems.
• Recommend and coordinate the purchase of integrated network related software and hardware between generation, transmission and energy management AGC functions.
• Design and coordinate a comprehensive technology refresh and recycle program for networked systems, including life cycle costing.
• Ensure operational technology systems are capable of meeting the NERC CIP obligations, utilizing best industry practice.
• Take a proactive approach regarding personal safety, the safety of others and comply with all OSHA and SECI safety rules.
• Complete all necessary online or classroom safety courses and participate in safety briefings and meetings.
• Take a proactive approach regarding environmental rules and regulations governing the construction and operation of the generation facilities.
• Complete all necessary online or classroom environmental courses.
• Meet requirements to immediately report any environmental reportable incidents.

Skills: Feasibility Studies, Technical Advisory, Failure Analysis, Cybersecurity Design, Network Integration, Technology Refresh, Regulatory Compliance, Safety Management

• Provide controls design support to multidisciplinary teams on maintenance and expansion projects.
• Perform basic design and specification and detailed design of control systems, including control narratives, cause and effect, panel layouts, loop drawings and P&IDs.
• Be proficient in programming DCS and PLC systems such as Honeywell TDC3000/PKS, Fox I/A and HIMA.
• Create construction packages, including scope of work and drawings and perform interdisciplinary reviews.
• Liaison with clients during project meetings and HAZOPs, and adhere to client standards.
• Prepare work-hour estimates for small to medium-sized projects.
• Participate in project planning and execution.
• Commission systems on site and perform factory acceptance tests and site acceptance tests.
• Work alone or lead teams of up to five people, overseeing quality and able to mentor junior staff.
• Actively identify the scope and manage the management of change processes and variances.

Skills: Controls Design, Detailed Design, PLC Programming, Construction Packages, Client Liaison, Project Estimation, System Commissioning, Team Leadership

• Coordinate with other disciplines to ensure compatibility with the design intent.
• Follow industry codes and standards, production guidelines and project standards.
• Perform calculations to analyze and design instrumentation and control systems.
• Draw on proactive and analytical problem-solving skills to deliver robust designs.
• Support the project team in the selection, evaluation, specification and engineering of instrumentation and control systems or products, including programmable logic controllers, distributed computer control systems and flow computers within the context of a multidisciplinary design team.
• Support client procurement activities and deliverables through the development of the required documentation.
• Conduct site observation and inspection activities during design or construction phases of the project.
• Perform thorough quality control of design documents and provide design ideas and solutions.
• Support team operations and play an integral part in the promotion of the health and safety culture.

Skills: Design Coordination, Standards Compliance, System Analysis, Problem Solving, System Specification, Procurement Support, Site Inspection, Quality Control

• Develop, recommend and implement control solutions and programs that improve the reliability of production, utility and facility equipment, reduce maintenance and operating costs, and reduce the potential of critical equipment failure.
• Maintain and support manufacturing equipment via troubleshooting mechanical, electrical, or control issues.
• Assist in cataloguing issues to identify common failure points and resolve.
• Work with project engineering to ensure maintainability of new and modified installations and to develop a standardization program that influences the selection of materials, equipment and spare parts for future purchases.
• Manage outside automation vendors to help drive manufacturing improvements.
• Define and integrate control schemes.
• Project manage third-party development of controls.
• Work with development teams and production personnel to generate and prioritize potential improvements for manufacturing defects.
• Transfer learning that helps drive identified improvements.
• Generate documentation for intellectual property.
• Define the capital plan requirements to complete the manufacturing control systems strategy.
• Support a factory that operates 24/7 by providing night and weekend on-call support.

Skills: Control Solutions, Equipment Troubleshooting, Failure Analysis, Standardization Program, Vendor Management, Controls Integration, Project Management, On-Call Support

• Create new and modify existing electrical power and controls schematics, single-line and interconnect diagrams.
• Create new and modify existing assembly drawings of designs.
• Work directly with technicians to progress fabrication, installation and commissioning of new or modified systems at any site.
• Generate wire list, cable schedule, terminal, bill of materials and other relevant reports.
• Perform fabrication and installation review and incorporate redlines for as-built documentation.
• Assist in peer review of internal and external supplier design documentation.
• Develop and update PLC software to support a senior software developer.
• Develop and update HMI software to support a senior software developer.
• Apply relevant company and industry design, drafting and parts techniques to plan, lay out and maintain data depicting engineering designs, including detail, assembly and installation drawings or datasets.

Skills: Electrical Schematics, Assembly Drawings, System Commissioning, Documentation Review, Bill Materials, PLC Programming, HMI Development, Design Drafting

• Drive the development, design and implementation of instrument and controls portions of capital projects.
• Develop capital and expense budget requirements related to instrumentation and controls upgrades.
• Generate detailed functional requirements specifications to ensure new instruments and controls meet project requirements.
• Write and participate in factory and site acceptance testing of PLC and SCADA systems.
• Provide designs to improve instrument and control reliability.
• Assist in implementing and improving reliability programs and processes, including defect elimination, predictive and preventive maintenance plans, criticality analysis, safety instrumented systems and associated metrics.
• Provide processing hazards analysis and layer of protection analysis support.
• Specify and procure new and replacement instruments and control hardware for PLC and SCADA systems and industrial networks using industry protocols.
• Assist and complete management of change, piping and instrumentation diagrams and processing hazards analyses.

Skills: Project Implementation, Budget Planning, Requirements Specification, System Testing, Reliability Design, Reliability Programs, Hazard Analysis, Hardware Procurement

• Work within the provisions and guidelines of the quality assurance system relevant to the industry.
• Prepare calculations in accordance with the relevant standards.
• Perform sizing and selection of control valves for severe service, flow elements, instrumentation and other control equipment.
• Design industrial control system applications, process control strategy and control logic designs.
• Work in accordance with broad technical guidelines and with minimal supervision.
• Perform vendor document review and approval.
• Work within tight deadlines and prioritize work to achieve them.
• Work within a multi-disciplinary team of engineers and designers.
• Perform scheduling and resource planning for the project discipline team.

Skills: Quality Assurance, Standards Compliance, Valve Sizing, Control Design, Document Review, Deadline Management, Team Collaboration, Resource Planning

• Evaluate and comment on discipline engineering work performed both internally and by contractors and subcontractors to ensure that work is being executed in accordance with project specifications, company standards and regulatory requirements.
• Facilitate effective execution of discipline engineering and design routines that align with the project’s goals, objectives and procedures.
• Assure accurate and timely communication among the project team and other company functions on discipline engineering activities, progress and issues.
• Demonstrate sound communication, facilitation and interpersonal skills in addition to technical ability.
• Execute control system life cycle management programs which include control system inventory, obsolescence plans, managing spare parts and upgrade or replacement planning.
• Support control system maintenance and test planning, software upgrades, emergency shutdown testing, offline and online testing and coordination of activities with or without plant shutdowns.
• Support metering systems maintenance planning, including for custody transfer, allocation, regulatory and leak detection applications.
• Support planning and coordination of tasks related to control system cybersecurity.
• Review systems for compliance with the company’s industrial control system requirements to minimize cybersecurity threats.
• Participate in multi-disciplinary alarm management efforts, including alarm rationalization, prioritization, development of state-based alarm schemes and design or modification of alarm systems.
• Review, update and develop the instrument and controls technical documentation and drawings, including P&IDs, cause and effect and control narratives.

Skills: Engineering Evaluation, Project Facilitation, Team Communication, Lifecycle Management, System Maintenance, Metering Support, Cybersecurity Compliance, Alarm Management

• Carry out electrical, instrumentation and controls project work by executing engineering, quality control monitoring and technical report development.
• Work with minimum supervision and complete tasks independently.
• Make decisions and take responsibility on technical matters within the discipline scope.
• Coordinate with various other departments and disciplines required for project implementation.
• Provide occasional site support for electrical, instrumentation and controls troubleshooting, commissioning and other site duties.
• Assign and review the work of junior automation engineers, technicians and drafters assigned to projects.
• Prepare the bill of materials required for project implementation in accordance with codes, standards, drawings and other established methods while adhering to quality system requirements.
• Actively participate in the preparation of technical and commercial proposals.
• Assume the responsibilities of project engineer for electrical, instrumentation and controls specific projects, which involve ensuring that all assigned deliverables are produced in compliance with quality, schedule and budget requirements.

Skills: Project Execution, Independent Decision-Making, Cross-Discipline Coordination, Site Support, Team Supervision, Bill Materials, Proposal Preparation, Project Engineering

• Install, commission and repair electronic and mechanical equipment.
• Perform in-field installations, including consulting with the customer or supervisor to plan the layout of equipment.
• Study P&IDs, schematics, manuals and other specifications to determine installation, operational and maintenance procedures.
• Install, commission and oversee installation of equipment according to manufacturer's specifications.
• Perform commissioning and testing of controls, including installation and field wiring of process instruments and control system components.
• Perform on-site walkthroughs to verify the correct installation of instrumentation and capture findings on reports.
• Test and calibrate systems to verify equipment settings and analyze malfunctions.
• Prepare for jobs by reviewing and interpreting maintenance manuals, schematics and electrical drawings.
• Review information on how to repair equipment.
• Organize pre and post-reporting and documentation, create purchase orders, order equipment, update the ERP system and prepare service proposals.
• Instruct and direct workers in operating, servicing and repairing equipment.
• Work with engineering personnel to resolve unusual problems in system operation and provide feedback on root cause analysis reports.
• Supervise workers in testing, tuning and adjusting equipment to obtain optimum operating performance for the company and the customer.
• Advise management regarding customer satisfaction, product performance and suggestions for product improvements.
• Maintain key relationships with engineers, customers, vendors and team.
• Contribute to people's development by coaching junior engineers and technicians.

Skills: Equipment Installation, Commissioning Support, System Calibration, Technical Troubleshooting, Documentation Management, Team Supervision, Customer Relations, Staff Coaching

• Develop HMIs for all PLC solutions using internal and industry-standard HMI design packages.
• Convert high-level specifications into robust solutions such as PID control for cooling systems.
• Develop complete documentation packages including engineering drawings, test procedures, installation and setup instructions and operator manuals.
• Integrate PLC solutions optimally into existing VFD or customer communication networks.
• Perform sophisticated troubleshooting of field problems and system issues with PLC and VFD implementation and application, including analysis of drawings, VFD configuration and data logs.
• Develop aftermarket engineering projects for upgrades and enhancements of medium voltage variable frequency drives requiring PLC solutions.
• Design complete instrumentation and controls solutions for a variety of industries, including greenfield and brownfield projects.
• Perform detailed engineering calculations.
• Prepare project documentation, including bill of materials, datasheets, specifications, test plans and detailed drawings.
• Participate in weekly safety reviews, including HAZID and HAZOP.
• Lead field installations and manage projects and change orders.

Skills: HMI Development, PID Control, Documentation Packages, PLC Integration, Advanced Troubleshooting, System Upgrades, Control Solutions, Project Leadership

• Perform maintenance and fault diagnosis across systems and take ownership of quality management system functions.
• Perform both the day-to-day routine requirements, scheduled and unscheduled planned preventative maintenance tasks.
• Ensure that compressed air systems and multiple water systems are maintained as per their validated status.
• Take ownership of site control systems and independent monitoring systems.
• Perform design, installation and test of instrumentation and control systems
• Specify sensors, wiring, signal conditioning, data acquisition, and control for system equipment
• Design interconnect wiring systems for a one-line drawing
• Supervise installation and test of instrumentation and controls on test systems
• Program new test data systems based on information supplied by the customer.
• Work with test engineers, facility engineers and other test stakeholders to ensure proper coordination has taken place before programming a high-speed controls system.
• Develop solutions to challenging issues and share with customers.
• Work safely and identify and mitigate instrumentation or electrical design, construction and operational safety, health and environmental risks.
• Support operations with troubleshooting and controls optimization.

Skills: Fault Diagnosis, Preventive Maintenance, System Ownership, Control Design, Sensor Specification, Wiring Design, System Programming, Controls Optimization

• Design the systems that will enable advanced automation of high-integrity functions.
• Carry out high-quality requirements capture and analysis to produce detailed system specifications.
• Work with a variety of stakeholders within the business to integrate multiple competing requirements.
• Produce high-quality system models using Simulink.
• Conduct research and development activities with external industry partners and academia.
• Design, develop and deploy data acquisition systems.
• Perform plant control engineering such as concept development and initial configuration, investigation, cost estimation and evaluation, and clarification and negotiation with the customer during the project development phase.
• Conduct control and instrumentation design and implementation engineering such as engineering management, system architecture development, configuration, database development, simulation development, procurement and design meetings with customers, partners, or vendors during the basic and detailed design stage.
• Provide commissioning support such as testing and tuning strategy, fault analysis, training and coordination among customers, partners and vendors during the site commissioning stage.
• Provide instrumentation and controls technical guidance for the pertinent portions of the assigned projects.
• Develop specifications, sketches and diagrams required for project design packages.
• Develop and monitor project scopes for applicable disciplines.
• Identify changes in scope and their impact as they occur.

Skills: Automation Design, Requirements Analysis, Stakeholder Integration, System Modeling, Data Acquisition, Control Engineering, Commissioning Support, Technical Guidance

• Ability to listen to others and ask clarifying questions at the appropriate time
• Understanding that personal performance and actions impact future work opportunities
• General awareness of the business of instrumentation and control engineering, as well as the technical design issues
• Strong verbal and written communication skills that are well-organized and persuasive
• Highly motivated self-starter with the ability to learn quickly
• Proficient in MS Word and Excel
• Experience in conducting and observing loop checks
• Experience with Microstation or AutoCAD
• General awareness of the scope, schedule and budget for engineering tasks
• Ability to work with more experienced instrumentation and control engineers to apply standard textbook instrumentation and control design and analysis approach

Qualifications: BS in Electrical Engineering with 5 years of Experience

• Previous I&C design experience for large-scale power plants
• Experience in developing control system network architecture diagrams, I/O list, instrument data sheets, control narratives, control logic diagrams, Piping and Instrumentation Diagrams (P&IDs) for control and instrumentation, and procurement specifications for I&C equipment
• Experience in instrumentation application, selection and process automation systems
• Excellent writing, presentation, and verbal communication skills
• Ability to be both an individual contributor and work effectively in teams
• Ability to accept both internal and external (client) feedback
• Able to prepare technical specs and data sheets
• Able to prepare block diagrams, interconnection diagrams, termination diagrams
• Able to prepare layouts for instrument / telecom systems
• Knowledge of Naval Architecture
• Proficient in MS Office suite, AutoCAD and structural analysis software applications
• Good analytical and problem-solving skills
• Possess good interpersonal and communication skills
• Able to multitask and work in a fast-paced environment

Qualifications: BS in Mechanical Engineering with 7 years of Experience

• Able to support business strategy, business development planning and execution
• Ability to act in an Owner’s Engineer role on behalf of the client to oversee the technical and performance obligations of vendors
• Experience in the large or medium-scale onshore/offshore oil and gas industry
• Significant experience in the development processes employed within the oil and gas industry, with particular experience in the identification and screening of development concepts and FEED
• Previous experience with conceptual studies, detailed design, system studies, engineering calculations, specification and data sheet preparation, vendor and client coordination, in-depth knowledge of plant layout
• Experience with Field Instrumentation, including pressure, flow, level, temperature, analysis instrumentation, and control systems, including process control, safety, and shutdown systems and Fire and Gas systems.
• Ability to provide technical guidance and direction to less experienced engineers
• Excellent verbal and written communication skills

Qualifications: BS in Instrumentation Engineering with 4 years of Experience

• Experience in instrument and control engineering in the oil, gas or petrochemical industry
• Must have in-depth knowledge of basic instrumentation and control including flow, level, pressure, temperature and process analysis
• Must have traceable experience in the field of instrument selection in relation to process applications
• Good knowledge of boiler control, process heater control and process furnace control in accordance with the Project Process requirement
• Good knowledge of materials and material selection for in-line instrumentation
• Knowledgeable of electrical systems for instrumentation, including cabling, wiring methods, grounding, materials, and control circuits
• Very knowledgeable with a wide variety of national and international standards, especially related to ISA, ANSI, ASME, API, NFPA and IEC
• Field experience in oil, gas or petrochemical industries with a wide variety of instruments and control installations
• Experience during plant construction, commissioning, start-up, or operations and including selection and installation of field instruments, cables, enclosures, trays, hazardous area installations and grounding
• Knowledge of and experience with Distributed Control System (DCS), Emergency Shutdown System (ESD) and their implementation
• Experience with Foundation Fieldbus
• Experience on selected project vendor’s PCS (project control system) and FAT (final acceptance test)
• Must be computer literate with an advanced level of experience in the use of office and technical software
• Good knowledge of English, both written and verbal

Qualifications: BS in Electronics Engineering with 8 years of Experience

• Proficient in the use of Linux-based software development tools
• Working experience as a Control System and Instrumentation Engineer 
• Good technical and computational skills
• Knowledge of EPICS and experience in the design of HMI 
• Experience in working within an accelerator-based or research facility 
• Experience in writing Functional Design Specifications for control systems 
• Good communication and coordination skills
• Able to work under the pressure of strict deadlines
• Fluency in English, with the ability to draw up technical specifications and reports and to make oral presentations

Qualifications: BS in Industrial Engineering with 4 years of Experience

• Progressive experience as an instrumentation and controls engineer.
• Experience with instrumentation design.
• Experience with ABB, Honeywell, or Emerson DCS and/or Schneider/Modicon or Rockwell PLC products.
• Experience in HMI development.
• Experience with industrial network design and implementation, including Ethernet/IP, DeviceNet, and Modbus.
• Experience in wireless mesh network design.
• Work experience in the oil refining, oil sands, mining, gas, power generation and pulp and paper sectors.
• Fluency in one or more control system languages.
• Strong interpersonal skills required for internal team interfaces and client liaison.
• Good written and oral communication skills.
• Hardware/software troubleshooting skills.
• Ability to adapt to new projects and quickly understand the defined scope.

Qualifications: BS in Electrical Engineering with 9 years of Experience

• Experience preparing drawings using AutoCAD Electrical.
• Experience in the design/build/programming of PLC systems with field experience, from design to start-up.
• Experience involving engine test cell instrumentation and control design, integration, troubleshooting and commissioning.
• Experience providing efficient and effective client service, including balancing multiple projects and responding to changes in deadline, scope and design.
• PLC knowledge/experience from an internship, professional setting, etc.
• Ability to interpret and create process and instrumentation diagrams (P&IDs).
• Ability to travel to customer facilities for design meetings, equipment installation supervision and commissioning.
• Problem-solving skills, strong organizational and time management skills, a team player, takes initiative to improve personal skills, and strong interpersonal skills.
• Ability to work effectively with all internal and external levels and groups.
• Demonstrates strong technical writing and oral communication skills.

Qualifications: BS in Mechanical Engineering with 5 years of Experience

• Experience with Microsoft Access.
• Experience in the start-up of instrumentation and control systems for water and wastewater facilities.
• Experience in conducting and observing loop checks.
• Experience with Microstation or AutoCAD.
• Basic understanding of the National Electrical Code.
• Working knowledge of communications networks.
• Understanding that personal performance and actions impact future work opportunities.
• Strong verbal and written communication skills that are well organized and persuasive.
• Proficient in MS Word and Excel.
• Ability to read and understand P&IDs.
• Ability to read and understand control schematics.
• Ability to work as part of a project team consisting of senior-level staff, CADD technicians, and field inspectors.
• Ability to work with a supervisor to effectively complete routine tasks.
• Capable of breaking a task into one or more component parts and sequencing those parts effectively.
• Ability to work with more experienced instrumentation and control engineers to apply standard textbook instrumentation and control design and analysis approach.
• Ability to listen to others and ask clarifying questions at the appropriate time.
• Willingness to accept suggestions and corrections on organization and planning issues.
• Highly motivated self-starter with the ability to learn quickly.

Qualifications: BS in Control Systems Engineering with 3 years of Experience

• Experience in a relevant engineering role.
• Experience in control system design, PLC and HMI programming.
• Experience in hazardous area working or design.
• Experience with hazardous area specifications and standards.
• Experience in process instrumentation specification and selection.
• Experience with AutoCAD.
• Project control or management experience.
• Allen-Bradley and/or Siemens PLC programming experience.
• Experience with high-voltage motor specifications and selection.
• Knowledge of process industry specifications and standards.
• Written and verbal communication skills.
• Ability to work on one's own initiative.
• Ability to work under pressure and under tight deadlines.

Qualifications: BS in Mechatronics Engineering with 8 years of Experience

• Work experience primarily in the design of instrumentation and control systems in chemical, resin, fibers, refining, petrochemical, pharma/bio and/or food/beverage industries.
• Experience applying industry codes and standards.
• Experience in effective project execution practices and application of project procedures.
• Knowledgeable in the utilization of Autodesk tools (AutoCAD, Revit, Navisworks, Recap).
• Basic understanding of SIS design/documentation/execution.
• Intermediate design and installation knowledge for instrumentation and controls equipment in general-purpose and electrically classified hazardous areas for dust and gas.
• Basic CAD skills in AutoCAD or MicroStation.
• Strong organizational skills for multiple project execution.
• Effective writing and communication skills.
• Proficient in the use of the Microsoft Office suite of applications, and have the ability to quickly learn and use other software packages.
• Excellent organizational, technical, communication and computer skills.
• Ability to apply network protocols, e.g., UDP, TCP/IP, and application of network hardware.

Qualifications: BS in Instrumentation Engineering with 7 years of Experience

• Experience with rocket launch ground systems including GSE and EGSE.
• Experience with AutoCAD Electrical and Rockwell Automation.
• Experience in electrical schematic design of control systems using analog and discrete instrumentation (transducers, limit switches, valves, motors, etc.).
• Experience creating fabrication assembly drawings and panel layouts.
• Experience inserting tables for BOM, wire list, terminal lists, etc. using Microsoft Excel.
• Experience with Allen-Bradley PLC control systems.
• Experience with Rockwell Automation RSLogix 5000, Studio 5000 Logix Designer, and Asset Centre.
• Experience with Microsoft Office products.
• Experience with AutoCAD P&ID.
• Experience with Creo and Windchill.
• Experience with SCADA packages, Iconics Gen 64, or similar.
• Familiar with existing applicable drafting standards.
• Knowledge of NEC 70, NEC 70E, NFPA 79, and UL508A.
• Knowledge of redundant control system design.

Qualifications: BS in Electronics and Communication Engineering with 12 years of Experience

• Experience relating to design of control systems for power plants or heavy industrial facilities.
• Experience relating to design or operation of commercial nuclear power plants.
• Experience evaluating and specifying pressure, temperature, flow, and level process instrumentation.
• Field experience at an operating nuclear plant.
• Experience with digital upgrades at an operating nuclear plant.
• Experience working in a team environment.
• Familiarity with the nuclear standard design process, and experience preparing engineering drawings, including wiring diagrams and schematics, P&IDs, and logic diagrams.
• Good written and oral communication skills.
• Strong analytical and problem-solving skills.
• Be able to obtain unescorted access to a nuclear power plant.
• Ability to sit for extended periods at a computer workstation.
• Be able to work in an environment with open discussions and visitors without getting distracted.

Qualifications: BS in Automation Engineering with 9 years of Experience

• Industrial and municipal engineering and design experience.
• Experience in proposal preparation, budget control, performance analysis and contract management.
• Experience of industrial instrumentation, control and communications design engineering capacity, either within a consulting environment or working closely with a consultancy.
• Experience of digital approaches to solve problems, including knowledge of relevant design tools, techniques and related methods, e.g., IT systems, Amtech, etc.
• Strong working knowledge of P&IDs, instrumentation and control systems design (PLC/PAC/RTU/DCS/HMI/SCADA), networking, process automation, etc.
• Familiarity with instrumentation used to measure and control flow, temperature, pressure, level and analytical properties.
• Strong understanding of contractual agreements, accurate record keeping and documentation.
• Demonstrated proficiency in MS Office software.
• Proficiency in problem-solving and troubleshooting.
• Effective communication skills, both written and verbal.
• Positive attitude, good interpersonal skills, and validated time management and organizational skills.
• Ability in effective communication with subordinates, peers, and superiors.

Qualifications: BS in Systems Engineering with 10 years of Experience

• Experience in processing facilities, DOE facilities, or DOD facilities.
• Experience with a nuclear facility.
• Experience in processing facilities, DOE facilities, or DOD facilities.
• Experience with national consensus codes and standards.
• Experience with Oracle database configuration and management.
• Experience with Profibus, Foundation Fieldbus, and integrated control network process systems.
• Calibration experience with temperature, flow, level, pH, pressure, and/or other process variable transmitters.
• Knowledge and experience with Ethernet switches, routers, cabling, and protocol(s).
• Knowledge of conventional process control, such as on/off, PID, and lead/lag.
• Must be able to obtain a DOE badge for access to the Hanford Site.
• Ability to multitask on multiple projects and work independently.
• Ability to work in a fast-paced and challenging environment. 
• Strong written and verbal communication skills (English).

Qualifications: BS in Industrial Engineering with 11 years of Experience

• Experience in plant engineering/operations.
• Experience with Allen-Bradley PLCs and motor controls, Studio5000 experience.
• Experience with electrical systems up to 480VAC, 4160V.
• Understands continuous improvement methodology.
• Knowledge of Microsoft Office, SAP, or equivalent, and utilization of engineering standards.
• Problem-solving, data collection, and analysis skills.
• Proven skills in effectively documenting and communicating technical information.
• Excellent presentation skills to technical and non-technical audiences.
• Good business judgment with the ability to calibrate with business objectives.
• Demonstrated ability to achieve quality results and meet deadlines.
• High level of initiative and ability to drive results.

Qualifications: BS in Electrical and Electronics Engineering with 8 years of Experience

• Experience in industrial engineering consulting, performing design and construction services, or controls integration, water and wastewater experience.
• Documented experience of PLC programming for Rockwell, Siemens, Modicon, or General Electric processors.
• Documented experience of HMI programming in WonderWare, IFIX, RS View, and Intellution.
• Ability to write project proposals and technical approaches.
• Ability to lead, manage and mentor a team of electrical and instrumentation and control engineers on interesting and complex projects.
• Ability and willingness to work collaboratively with an interdisciplinary team on interesting and complex projects.
• Excellent verbal and written communication skills.
• Ability to multitask with strong attention to detail.
• Excellent organizational and time management skills.
• Ability to work well under the pressure of deadlines.

Qualifications: BS in Applied Physics with 13 years of Experience

• Experience performing engineering analysis and design functions with experience leading engineering projects in a variety of industries, including greenfield and brownfield projects.
• Experience with selecting and configuring DCS/PLC platforms, including HMI and reporting software packages.
• Experience specifying field instrumentation and process analyzers for applications including basic process control, safety instrumented systems and fire and gas detection, including development of installation details and loop drawings.
• Experience with estimating engineering project costs.
• Working knowledge of Smart Plant Instrumentation.
• Working knowledge of databases and AutoCAD.
• Working knowledge of Microsoft Office products.
• Understanding of NEC/ISA standards.
• Strong skill set in understanding PFDs, P&IDs, and Cause and Effect Matrices.
• Strong background in control system architecture and interface solutions, including configuration of switches, servers, and operator workstations.
• Ability to function as a project engineer.
• Excellent analytical, problem-solving, and attention to detail abilities.
• Ability to multitask and organize for project efficiency.
• Strong interpersonal and communication skills.

Qualifications: BS in Engineering Physics with 11 years of Experience

• Facilities experience in a complex setting applying the principles that govern the operation, design, construction, and commissioning of building and campus I&C infrastructure.
• Knowledge of building management systems and power monitoring systems.
• Proficient in spreadsheet, word processing, and presentation software.
• Strong organizational skills and ability to manage multiple tasks and meet deadlines.
• Proven problem-solving and analytical skills, being able to quickly size up an issue, make recommendations to management, and lead in the implementation of solutions.
• Strong communication and interpersonal skills.
• Demonstrated project management skills required for complex I&C/BMS infrastructure projects, including project scope development, budgeting, and scheduling.
• Ability to generate and review field switching procedures.
• Ability to read and annotate blueprints and electronic drawing documents.

Qualifications: BS in Process Control Engineering with 9 years of Experience

• Experience with industrial or aerospace control system design or operation.
• Experience in Python, PLC Ladder Logic, or LabVIEW.
• Experience with video monitoring systems (webcam, 3G-SDI, high speed, infrared, etc.).
• Experience working with instrumentation, including static and dynamic pressure, cryogenic temperature sensors (silicon diodes or RTDs), LVDTs, and accelerometers.
• Design experience in noise reduction, shielding, and analog and digital filtering to provide high-fidelity measurements.
• Proficient in data collection and analysis with common database and software data analysis tools such as SAP, Analytics for Excel and Tableau.
• Familiarity with upstream automation projects.
• Familiarity with smart controllers, containers, and project execution.
• Proficiency with electrical diagnostic equipment (multimeters, oscilloscopes, etc.) to troubleshoot instrumentation and control circuits.
• Ability to design electrical circuits using CAD-based schematic and panel layout tools (AutoCAD Electrical).
• Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion.

Qualifications: BS in Chemical Engineering with 10 years of Experience

• Experience in specific I&C disciplines for power plants.
• Experience in the instrumentation of wind tunnels or chemical processes.
• Experience in software testing and validation.
• Experience in hardware and network design.
• Experience in high level programing languages (C, C++, or Python).
• Familiarity with industrial UL standards.
• Knowledge in programming HMIs and programming logic controllers (PLC).
• Knowledge of database, project management, spreadsheet and word processing software, electronic mail, graphics, technical diagrams, flow charts, PDF editor, etc.
• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Qualifications: BS in Manufacturing Engineering with 11 years of Experience

• Previous experience in the specification and procurement of process instrumentation including control valves and pressure, temperature and level instruments.
• Experience in programming data acquisition and control systems, including programmable logic controllers (PLC), Allen-Bradley. 
• Experience with DeltaV and LabVIEW would also be of use for existing control systems at GTI.
• Familiarity with gasification, methane reforming, and electrical power generation processes.
• Familiarity with HAZOP review methodology and other plant safety assessments.
• Familiarity with electrical wiring diagrams and the ability to troubleshoot wiring issues and provide technical construction management to electrical contractors.
• Familiarity with instrumentation and control strategies in chemical, oil and gas, and/or power generation plants.
• Ability to read process flow diagrams (PFD) and piping and instrumentation diagrams (P&ID).
• Ability to develop control system logic and interlock logic diagrams.
• Ability to manage automation projects for controls-related work that is completed by project partners and external companies.
• Ability to assist in generating operating procedures.
• Ability to communicate effectively orally and in writing and work effectively as a team/project member.

Qualifications: BS in Biomedical Engineering with 9 years of Experience

• Experience in developing electrical control systems, working with PLCs and HMIs in a manufacturing environment.
• Experience in a hands-on automation/controls environment.
• Experience in building electrical systems for manufacturing equipment.
• Experience in software and hardware development of common programmable logic controllers (PLC), and human/machine interfaces (HMI).
• Experience in a cross-functional team.
• Knowledge of Microsoft Office Suite.
• Knowledge of CIP, SIP, and process utilities control systems.
• Excellent organization skills with the ability to manage multiple tasks simultaneously.
• Strongly motivated, well-organized and shows professional initiative.
• Ability to troubleshoot electrical panels and mechanical mechanisms.
• Well-versed in pneumatic, hydraulic, and electrical control systems.
• Aptitude to read drawings (blueprints and schematics), reference manuals and assembly system instruction guides.

Qualifications: BS in Computer Engineering with 7 years of Experience

• Certificate 2 ISA/IEC 61511 SIL Specialist.
• Experience doing I&C design and estimation for the programming phase of projects in the advanced technology sector.
• Experience with Rockwell Automation hardware and software.
• Experience in cost estimating (engineering and capital costs), proposal development, marketing, and business development efforts for I&C projects.
• Experience with multi-disciplinary large capital projects involving owners, general contractors, contractors, and system integrators.
• Experience in the engineering design of industrial control systems, including instrumentation, control logic, PLC, SCADA and DCS-based control systems, and control systems documentation.
• Experience supervising engineers, designers, and drafters as part of a control system design team.
• Safety integrated system experience.
• Good understanding of design/build (engineering and construction).
• Good understanding of complex process systems architecture and design, instrumentation, device selection, networking, PLC and I/O architectures, P&IDs, data sheets, and SCADA.
• Working knowledge of environments common in large industrial applications, such as dry/wet mechanical, AWN, gas/chem distribution, HVAC, and clean room environmental control.
• Proficient with written and verbal technical communication, including generating reports and conducting group presentations.

Qualifications: BS in Power Engineering with 14 years of Experience

• Experience in electrical or mechanical engineering or a closely related field.
• Experience with PLC-based control system architecture, especially Rockwell Automation/Allen-Bradley and Siemens PCS7.
• Experience with designing and operating fire alarm systems and hazardous gas detection systems.
• Experience with engineering documentation (P&IDs, sequence of operations, engineering specifications, and design standards).
• Experience with control methods for process systems.
• Experience of technical writing (e.g., specifications).
• Experience with reading and interpreting construction contract documents.
• Experience with construction, start-up, and commissioning/turnover of facilities systems.
• Computer skills and database knowledge.
• Strong verbal and written communication skills.
• Ability to use engineering tools (i.e., industry standard sizing programs).
• Ability to configure industrial systems.

Qualifications: BS in Robotics Engineering with 9 years of Experience

• Experience in project engineering and project management, including EPC or engineering firm experience.
• Heavy industrial experience in the pulp and paper or chemical industries.
• Experienced I&C lead engineer on major capital projects from the study phase, detailed design, construction support, check out and start-up.
• Experience in driving projects within budget from initiation through a successful and timely conclusion.
• Experience in E&C projects directly related to the chemical process industry, including but not limited to chemical, petrochemical, chemical intermediates, or fiber industries.
• Professional engineer registration, with the ability to obtain PE registration in other states via exam or reciprocity.
• Strong interpersonal skills to build and foster positive client relationships.
• Ability to perform activities to improve the reliability and efficiency of operations for the client.
• Ability to coordinate and supervise project implementation, control project costs, monitor progress and quality of the project.
• Strong ethical approach to safety, quality, environmental protection and business.
• Positive outlook and approachable manner.
• Professional approach and demeanour.

Qualifications: BS in Nuclear Engineering with 16 years of Experience

• Engineering/design experience in the I&C systems.
• Experience with PLC code/SCADA.
• Experience with MCC and VFD control requirements.
• Semiconductor experience large-scale industrial, skill sets, valve selection/sizing, AB (Rockwell) automation platforms, and chemical delivery systems.
• Strong relevant engineering/design experience in the industrial/advanced technology sector.
• Familiar with wiring regulations.
• Familiar with ATEX requirements.
• Proficient in the Microsoft suite (Excel).
• Excellent English level, written and spoken.
• Ability to interact with other engineering disciplines, clients, and vendors at all levels.
• Team worker, yet capable of working independently on challenging and diversified activities.
• Capable of working in a multi-disciplinary team dedicated to complex projects.
• Good communication and interpersonal skills.

Qualifications: BS in Energy Systems Engineering with 11 years of Experience

• Experience in operations and maintenance working with industrial electrical systems 480VAC to 5VDC in a process environment.
• Experience with the specification, configuration and operational troubleshooting of process control instrumentation.
• Experience with project management for process control systems.
• Experience with process control network architecture.
• Experience in a unionized manufacturing environment.
• Experience in engineering, drafting and design.
• Knowledge of the National Electrical Code (NEC) and the International Building Codes (IBC).
• Working knowledge of the use and application of PLCs, DCS, and process data systems.
• Ability to lead all phases of capital projects, including scope development, cost estimating, design, procurement, construction, commissioning and start-up.
• Strong proficiency in using Microsoft Office Suite, including Excel, Word, and PowerPoint.
• Strongly motivated, well organized, and shows professional initiative.
• Ability to create, read, and interpret engineering drawings related to electrical instrumentation and controls using applicable software such as AutoCAD, Revit, Navisworks, Bluebeam, SKM, or other relevant engineering software.

Qualifications: BS in Engineering Technology with 12 years of Experience

• Experience in selection, application, and ISA data sheet specification of hardware, including pressure/temperature/level instruments, control valves, shutdown valves, and fire/gas detection.
• Extensive knowledge of discipline design standards, specifications, codes, and appropriate safety criteria.
• Experience in the cybersecurity field for industrial control systems.
• Basic knowledge of control systems and safety systems.
• Understanding and experience of producing and interpreting complex or detailed design drawings and documentation using a creative approach.
• Proficient in data collection and analysis with common database and software data analysis tools such as SAP, Analytics for Excel and Tableau.
• Proficient in the Microsoft Office suite of software programs.
• Be able to review, evaluate, and update cause and effect, P&IDs, logic and architecture diagrams and control narratives.
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities.
• Proficiency in a Windows-based environment and software (Word, PowerPoint, Project, advanced Excel and Access).
• Excellent interpersonal, verbal and written communication skills.
• Good knowledge of Dutch and English.
• Ability to be flexible and to be able to multitask and prioritize.

Qualifications: BS in Automation and Robotics with 13 years of Experience

• Experience with key duties and responsibilities described above.
• Experience in electrical engineering areas, such as instrumentation, controls, or PLC programming.
• Working knowledge of CAD and Microsoft Office (Excel, Word, PowerPoint).
• Experienced in high-tech FAB projects and a fast-tracking working environment.
• Understanding of power generation technologies, ideally renewable and/or distributed energy.
• Proficiency in industry standards in control systems.
• Knowledge of PLC logic and PLC SCADA software.
• Basic knowledge of Word, Excel, and PowerPoint.
• Ability to lead and collaborate across multi-functional teams.
• Ability to work in a fast-paced and challenging environment.
• Strong written and verbal technical communication skills.

Qualifications: BS in Electronics Engineering with 8 years of Experience

• Experience with PLC wiring and IO schematics and control systems.
• Experience with control narratives and logic diagrams.
• Experience with PLC programming and HMI development.
• Familiarity with instrumentation in the oil and gas/mining sector and/or heavy industry.
• Understanding of SIS and SIL ratings.
• Working knowledge of the Canadian Electrical Code.
• Must have strong AutoCAD and MS Office skills.
• Strong organizational and time management skills with the ability to work effectively in a fast-paced, high-pressure, and deadline-driven environment.
• Excellent with English verbal and written communication skills.
• Excellent interpersonal and decision-making skills.
• Strong attention to detail and accuracy.
• Positive attitude and ability to effectively work in a team atmosphere.

Qualifications: BS in Avionics Engineering with 6 years of Experience