Job Summary: 

• Performs visual, dimensional, and functional inspection and testing according to documented policies and procedures
• Records inspection and test data as prescribed by written instructions and procedures
• Operates all associated test and measurement equipment as instructed and as documented in procedures
• Recommends changes to policies and procedures
• Prepares and submits change requests
• Documents non-conformances in the non-conforming material review system
• Participates in GR&R studies by engineers or technicians
• Collects data for first article inspections
• Performs testing and inspection in accordance with special test requests
• Assists in gathering, analyzing, and trending of data
• Performs work of a miscellaneous nature
• Supports all divisional initiatives as identified by divisional management and in support of quality management systems (QMS), environmental management systems (EMS), and other regulatory requirements

Skills on Resume: 

• Inspection Techniques (Hard Skills)
• Data Recording (Hard Skills)
• Equipment Operation (Hard Skills)
• Procedure Compliance (Hard Skills)
• Change Management (Soft Skills)
• Nonconformance Reporting (Hard Skills)
• Data Analysis (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Perform inspection and testing in-line at the manufacturing area, and final inspections for shipment
• Check material quantities and descriptions at shipping to ensure that they match purchase orders
• Measure dimensions of completed products or workpieces to verify conformance to specifications
• Read work orders or other instructions to determine product specifications or materials requirements
• Discard or reject products, materials, or equipment not meeting specifications
• Notify supervisors or other personnel of production problems
• Generate inspection records, product statuses, and summarize data to meet ISO requirements
• Control and maintain manufacturing and inspection documentation

Skills on Resume: 

• Inspection Testing (Hard Skills)
• Material Verification (Hard Skills)
• Dimensional Measurement (Hard Skills)
• Specification Reading (Hard Skills)
• Quality Rejection (Hard Skills)
• Problem Reporting (Soft Skills)
• Record Generation (Hard Skills)
• Document Control (Hard Skills)

Job Summary: 

• Examine materials from suppliers before sending them to production
• Approve or reject incoming parts
• Record the pass/fail grade of products
• Conduct visual and measurement tests
• Read blueprints and specifications
• Inspect products received from a vendor
• Use measuring tools such as a micrometer, caliper, tape measure, and other means
• Return products for re-work and confirm re-work
• Document inspection results by completing reports and logs
• Understand the product as a whole and its parts
• Travel to vendors to inspect or discuss quality problems or improvements

Skills on Resume: 

• Material Examination (Hard Skills)
• Parts Approval (Hard Skills)
• Quality Recording (Hard Skills)
• Visual Testing (Hard Skills)
• Blueprint Reading (Hard Skills)
• Tool Utilization (Hard Skills)
• Report Documentation (Hard Skills)
• Vendor Communication (Soft Skills)

Job Summary: 

• Perform inspections of purchased parts, subassemblies, and finished products according to defined criteria in product documentation, drawings, specifications, procedures, or build packages
• Be competent in all quality processes and procedures according to the training matrix
• Conduct and document process monitoring audits using documented procedures
• Accurately document the results of the inspections, monitoring, and testing
• Maintain all controlled document files and test records in a timely and accurate manner
• Monitor critical equipment and instrumentation to ensure calibration status is current
• Identify and communicate defects or suspect materials and initiate the non-conforming process
• Assist other quality team members with customer support issues, work instruction creation or updates, document control, control plans, part acceptance criteria, and related tasks
• Effectively communicate quality issues to other functions when observations are made
• Maintain order and cleanliness of quality stations and cleanrooms to prevent mixing
• Be responsible for performing the correct completion of inspection results in the device history record (DHR)
• Verify and ensure reconciliation of the data between the documents and the physical quantities, during the process and at the end of each lot, ensuring the accuracy of records and maintaining supporting documentation
• Perform a review of device history records and other documentation for compliance with established procedures and good documentation practices
• Enter appropriate data and information into the ERP and QMS system

Skills on Resume: 

• Parts Inspection (Hard Skills)
• Process Auditing (Hard Skills)
• Results Documentation (Hard Skills)
• Equipment Monitoring (Hard Skills)
• Defect Identification (Hard Skills)
• Customer Support (Soft Skills)
• Issue Communication (Soft Skills)
• Data Entry (Hard Skills)

Job Summary: 

• Perform inspection, receiving inspection, and in-process inspection
• Utilize manual gauging and operate CMM
• Inspect incoming material per receiving inspection requirements
• Sort products based on visual aids
• Complete necessary forms and paperwork
• Understand TS processes for nonconforming material, identification, and inspection processes
• Adhere to all health and safety, environmental laws and procedures
• Measure or weigh products to assess conformity to quality standards, requiring basic math skills
• Use technical skills and knowledge to identify the cause of the problem
• Use computer applications to monitor quality

Skills on Resume: 

• Inspection Execution (Hard Skills)
• CMM Operation (Hard Skills)
• Material Inspection (Hard Skills)
• Product Sorting (Hard Skills)
• Form Completion (Hard Skills)
• Process Understanding (Hard Skills)
• Safety Compliance (Soft Skills)
• Problem Identification (Hard Skills)

Job Summary: 

• Inspect and approve incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials
• Inspect in-process production by confirming specifications, conducting visual and measurement tests, and communicating required adjustments to the production supervisor
• Approve finished products by confirming specifications, conducting visual and measurement tests, returning products for re-work, and confirming re-work
• Document inspection results by completing reports and logs, summarize re-work and waste, and input data into the quality database
• Keep measurement equipment operating by following operating instructions and calibration requirements, and calling for repairs
• Maintain a safe and healthy work environment by following standards and procedures and complying with legal regulations
• Update job knowledge by participating in educational opportunities and reading technical publications
• Accomplish the quality and organization mission by completing related results

Skills on Resume: 

• Material Inspection (Hard Skills)
• Production Inspection (Hard Skills)
• Product Approval (Hard Skills)
• Result Documentation (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Safety Compliance (Soft Skills)
• Knowledge Updating (Soft Skills)
• Mission Achievement (Soft Skills)

Job Summary: 

• Approve finished products and incoming material by conducting visual, tactile, audible, and measurement tests and confirming specifications using IBAS cosmetic visual criteria
• Return rejected products to repair for re-work, and confirm re-work before approving as finished products
• Document inspection results by completing reports and logs, summarize re-work and waste, and input data into a quality database
• Assist the production team with cosmetic defects by playing the role of an expert for IBAS cosmetic visual criteria
• Assist the team with diagnosing issues with the bikes
• Maintain a safe and healthy work environment by following standards and procedures and complying with legal regulations
• Work overtime, any shift, as well as rotating shifts and weekends
• Accomplish the quality and organization mission by completing related results
• Comply with policies, guidelines, and regulatory requirements per the manufacturing and quality management system and employee handbook

Skills on Resume: 

• Product Inspection (Hard Skills)
• Rework Confirmation (Hard Skills)
• Result Documentation (Hard Skills)
• Defect Expertise (Hard Skills)
• Issue Diagnosis (Hard Skills)
• Safety Compliance (Soft Skills)
• Shift Flexibility (Soft Skills)
• Policy Compliance (Soft Skills)

Job Summary: 

• Perform mechanical and visual receiving and shipping inspection on hardware, fasteners, fabrications, and electrical products within all degrees of complexity
• Document, tag, control, and segregate product in accordance with established procedures
• Use a controlled stamp to indicate product acceptance and certificate accuracy
• Work with external customers, internal customers, suppliers, and business leadership to meet goals and communicate performance
• Inspect inbound and outbound materials for kind, condition, and supplier documentation
• Perform sample lot inspections of drawing characteristics
• Initiate discrepancy reports and hold notices
• Maintain equipment calibration
• Coordinate with customer quality resources when corrective actions flow from the customer to the supply base
• Coordinate contract submittals and product acceptance with quality assurance
• Review and interpret customer requirements, review and approve supplier quality documentation
• Partner with sourcing to establish methods of evaluating existing suppliers, and approve potential suppliers through various assessment screens and quality metrics
• Support internal and external ISO audits

Skills on Resume: 

• Material Inspection (Hard Skills)
• Product Documentation (Hard Skills)
• Stamp Control (Hard Skills)
• Customer Communication (Soft Skills)
• Lot Inspection (Hard Skills)
• Discrepancy Reporting (Hard Skills)
• Supplier Evaluation (Hard Skills)
• Audit Support (Hard Skills)

Job Summary: 

• Provide inspection support for shop floor production cells
• Measure the product to prove dimensional compliance
• Record inspection results in a clear and organized manner
• Review manufacturing build records to ensure that all steps have been properly documented
• Assist the quality engineer with the preparation of certification data packages, contract quality data packages, and first article inspection reports (FAIR)
• Ensure proper documentation and control of non-conforming product
• Assist the product team in the analysis of process and product defect data, including root cause, and the implementation of corrective actions
• Support during internal and customer quality system and safety audits

Skills on Resume: 

• Inspection Support (Hard Skills)
• Dimensional Measurement (Hard Skills)
• Result Recording (Hard Skills)
• Record Review (Hard Skills)
• Report Preparation (Hard Skills)
• Nonconformance Control (Hard Skills)
• Defect Analysis (Hard Skills)
• Audit Support (Hard Skills)

Job Summary: 

• Ensure all work is conducted in compliance with all health and safety policies and procedures
• Ensure all work is conducted in compliance with all laser risk assessments and guidelines
• Work within company procedures for quality (QMS) and maintain high levels of cleanliness, traceability of parts, and documentation
• Assist and support with internal audits
• Inspect, test, or measure materials as part of the goods inwards process to verify conformance to drawings and specifications
• Inspect and test the product and complete documentation as part of the final inspection process to verify conformance to specifications and enable on-time delivery
• Produce reject notes to enable effective return of products to suppliers and feedback on quality
• Follow the MRB procedures in managing the non-conforming product and the completion of documentation
• Conduct inspection and evaluation of RMAs (returns) and associated documentation to determine status
• Calibrate mechanical measuring equipment and ensure records are maintained
• Work collaboratively with the production team and provide advice to correct errors and increase efficiency and recommend adjustments to the assembly or production process
• Utilise inspection equipment (calipers, verniers, micrometers, gauges, etc.) to verify quality
• Undertake training relevant to the role
• Contribute to continuous improvement by recommending and implementing preventative and corrective action measures

Skills on Resume: 

• Safety Compliance (Soft Skills)
• QMS Adherence (Hard Skills)
• Audit Support (Hard Skills)
• Material Inspection (Hard Skills)
• Final Inspection (Hard Skills)
• Nonconformance Management (Hard Skills)
• Equipment Calibration (Hard Skills)
• Process Improvement (Soft Skills)

Job Summary: 

• Read prints and specifications, measure parts, and work with the following types of gages to determine if the product is in conformance, including pin gages, micrometers (various types), drop gage indicators, calipers, hardness tester, tri-rolls, optical comparator, and other equipment or gages
• Visually inspect sample parts, usually under a magnifying glass or microscope, from each pan and identify any nonconforming parts in the lot
• Document results on applicable quality documentation
• Actively participate in continuous improvement activities to assist the team in meeting goals related to quality, cost, and delivery
• Train other inspectors to the functions required for that position
• Work with minimal supervision to independently perform the job of Inspector A in its entirety
• Communicate job status and relevant information to coworkers as well as inform operators on the floor of defective products, while performing inspections on the shop floor
• Complete assigned tasks, functions, and special projects promptly
• Read and understand written work instructions
• Complete router, inspection reports, and non-conformance report
• Keep the work area organized and clean at all times
• Observe all safety regulations in all duties

Skills on Resume: 

• Print Reading (Hard Skills)
• Part Measurement (Hard Skills)
• Visual Inspection (Hard Skills)
• Result Documentation (Hard Skills)
• Continuous Improvement (Soft Skills)
• Inspector Training (Soft Skills)
• Status Communication (Soft Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Receive articles, parts, and services for purchased items
• Perform incoming inspections with appropriate equipment
• Verify certification and conformity to product specifications
• Perform SAP transaction “received parts”
• Communicate engineering discrepancies and generate quality notifications
• Segregate and protect identification and traceability
• Follow policies and procedures for receiving the inspection and quality assurance manual
• Report directly to the quality manager

Skills on Resume: 

• Incoming Inspection (Hard Skills)
• Specification Verification (Hard Skills)
• SAP Transactions (Hard Skills)
• Discrepancy Communication (Soft Skills)
• Quality Notification (Hard Skills)
• Product Segregation (Hard Skills)
• Policy Adherence (Soft Skills)
• Manager Reporting (Soft Skills)

Job Summary: 

• Translate dimensions from blueprints using shop math
• Operate all equipment with a high degree of confidence
• Communicate findings verbally and through the use of email and database applications
• Use basic inspection equipment (micrometer, calipers, test indicators, surface plate, etc.) and a surface roughness tester (profilometer)
• Work with common geometric features used in blueprints and provide application knowledge of how to inspect for each (roundness, concentricity, flatness, runout, perpendicularity, and parallelism)
• Read and correctly interpret rejection documentation (rejection tags, purge and hold forms, etc.)
• Enter data into the inspection database
• Set up inspection gauge equipment (bore gages, thread micrometers, etc.)
• Use a profile projector (comparator) and a hardness tester
• Inspect any dimension applicable to the surface plate and hand tool inspection
• Obtain correct information from the MRP application to properly perform an MRB transaction (inventory control of a rejected item)
• Keep work area and equipment carts organized and clean
• Meet productivity goals related to department workload
• Be observant of company safety standards
• Follow instructions and procedures and escalate any issue impacting workflow or quality

Skills on Resume: 

• Blueprint Translation (Hard Skills)
• Equipment Operation (Hard Skills)
• Verbal Communication (Soft Skills)
• Inspection Equipment (Hard Skills)
• Geometric Inspection (Hard Skills)
• Rejection Interpretation (Hard Skills)
• Data Entry (Hard Skills)
• Safety Awareness (Soft Skills)

Job Summary: 

• Perform a mechanical inspection to ensure all quality aspects of the job are met exactly
• Measure piece parts, components, and assemblies
• Generate detailed inspection and nonconformance reports
• Check documents for accuracy and compliance with requirements
• Read and interpret information from engineering drawings, travelers, specifications, and other documents to generate a complete and precise inspection report or record
• Interface and provide support to other departments, suppliers, and customers on quality-related issues
• Maintain a clean and safe work environment
• Attain positive results and communication through team effort

Skills on Resume: 

• Mechanical Inspection (Hard Skills)
• Part Measurement (Hard Skills)
• Report Generation (Hard Skills)
• Document Verification (Hard Skills)
• Drawing Interpretation (Hard Skills)
• Quality Support (Soft Skills)
• Workplace Safety (Soft Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Maintain a high-quality relationship with the manufacturing team, be personable and effective in verbal and written communication
• Execute product and process validation or inspection plans in a fast-paced environment
• Inspect, test, or measure components, products, and materials being produced
• Identify and contain suspect defective material
• Initiate and participate in quality-related continuous improvement (Kaizen) projects
• Communicate emerging and trending quality issues to prevent a negative impact on the factory
• Identify and differentiate between defect types, determine the severity of a defect, and the required response
• Apply critical thinking skills to engage and troubleshoot new quality issues

Skills on Resume: 

• Team Communication (Soft Skills)
• Validation Execution (Hard Skills)
• Product Inspection (Hard Skills)
• Defect Containment (Hard Skills)
• Continuous Improvement (Soft Skills)
• Issue Communication (Soft Skills)
• Defect Analysis (Hard Skills)
• Critical Thinking (Soft Skills)

Job Summary: 

• Approve incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials
• Communicate required adjustments to production leads and the supervisor
• Return products for re-work, confirm re-work
• Inspect components, subassemblies, and assemblies
• Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into the quality database
• Keep the measurement equipment operating by following the operating instructions
• Conduct scheduled and unscheduled process audits to ensure compliance with planned manufacturing methods and management system requirements
• Accomplish the quality and organization mission by completing related results

Skills on Resume: 

• Material Approval (Hard Skills)
• Production Communication (Soft Skills)
• Rework Confirmation (Hard Skills)
• Component Inspection (Hard Skills)
• Result Documentation (Hard Skills)
• Equipment Operation (Hard Skills)
• Process Auditing (Hard Skills)
• Mission Achievement (Soft Skills)

Job Summary: 

• Read and understand engineering documents to ensure that incoming material is compliant, including metalwork, cable assemblies, PCB assemblies, and safety-critical components
• Ensure parts identified as UL conform via the creation of incoming inspection check sheets and ensuring the appropriate documentation is present and correct
• Review incoming material to ensure incoming quality and document results on the company database tools
• Accurately communicate the results of inspection activities and work with supplier quality personnel when issues are found
• Accurately use tools provided (may include both manual and automated measuring equipment)
• Perform inspections on products, both manufactured and repaired, to ensure quality levels are maintained
• Keep accurate and up-to-date records and data sheets on in-process and end-of-line inspection failures
• Perform random inspections and audits on the manufacturing floor, including tests
• Perform first article inspections on products
• Report results in a clear format regularly
• Control non-conforming material

Skills on Resume: 

• Document Interpretation (Hard Skills)
• Inspection Checklist (Hard Skills)
• Material Review (Hard Skills)
• Issue Communication (Soft Skills)
• Tool Utilization (Hard Skills)
• Product Inspection (Hard Skills)
• Record Keeping (Hard Skills)
• Nonconformance Control (Hard Skills)

Job Summary: 

• Conduct in-process inspection of manufactured parts, ensuring strict dimensional compliance with the drawing
• Read and interpret drawings and blueprints to ensure compliance with material, dimensional, and performance standards
• Ensure drawings are to the most current revision and reference the most up-to-date standards
• Conduct final inspection of assemblies and sub-assemblies before packing to ensure material, dimensional, functionality, and performance compliance and manage material certifications
• Use measuring tools, both mechanical and automated, to ensure dimensional compliance
• Keep meticulous records for all inspections conducted
• Manage quality records to ensure lot and part traceability
• Inspect purchased material, both raw and finished, to ensure adherence to quality standards

Skills on Resume: 

• In-process Inspection (Hard Skills)
• Blueprint Reading (Hard Skills)
• Revision Verification (Hard Skills)
• Final Inspection (Hard Skills)
• Tool Utilization (Hard Skills)
• Record Keeping (Hard Skills)
• Traceability Management (Hard Skills)
• Material Inspection (Hard Skills)

Job Summary: 

• Assist with the instruction for reworking parts
• Quarantine non-conforming material in accordance with the QMS
• Assist the quality manager with ensuring company-wide adherence to the QMS
• Conduct internal audits on functional areas by the quality manager
• Conduct first article inspections on new products and by the customer
• Advise the quality manager on methods for improving product quality, design, and manufacturing processes
• Conduct product testing and verification of the process
• Meet with vendors, customers, quality representatives, and company personnel to discuss and resolve quality challenges and issues

Skills on Resume: 

• Rework Instruction (Soft Skills)
• Material Quarantine (Hard Skills)
• QMS Adherence (Hard Skills)
• Internal Auditing (Hard Skills)
• First Article (Hard Skills)
• Quality Improvement (Soft Skills)
• Product Testing (Hard Skills)
• Stakeholder Communication (Soft Skills)

Job Summary: 

• Inspect machined parts, components, assemblies, and materials to ensure compliance with appropriate regulatory guidelines (Military Standards, AS9100, ASTM, ANSI, and ASME Code)
• Provide various electronic and hard copy reports of inspections and notify appropriate parties, including project engineers
• Set up and calibrate measuring and test equipment to conduct geometric dimensioning and tolerancing (GD and T)
• Perform and document first article inspections in accordance with AS9100
• Assist quality engineering in the design of proper inspection techniques for multiple variations of large and small, extremely complex parts
• Observe testing and provide oversight to verify compliance with requirements
• Perform and witness non-destructive test (NDT) on various metallic and non-metallic materials, parts, and assemblies using a variety of methods and techniques such as visual testing (VT), magnetic particle (MT), liquid penetrant (PT), and ultrasonic testing (UT)
• Interact with regulatory agencies and customers during audits and review of company inspection and calibration activities
• Monitor and verify quality in accordance with statistical process or other control procedures
• Be responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the company
• Work safely in accordance with established operating procedures and practices

Skills on Resume: 

• Parts Inspection (Hard Skills)
• Report Preparation (Hard Skills)
• Equipment Calibration (Hard Skills)
• First Article (Hard Skills)
• Inspection Design (Hard Skills)
• Test Oversight (Hard Skills)
• NDT Methods (Hard Skills)
• Audit Interaction (Soft Skills)

Job Summary: 

• Perform inspections (incoming, in-process, and final inspection) for dimension and welding requirements
• Interpret drawings and customer requirements
• Monitor all measuring equipment for calibration due dates and coordinate outsourced calibration
• Conduct in-house calibration for selected measuring equipment (vernier caliper, OD micrometer)
• Generate accurate inspection reports, non-conformance reports, and other customer-required documentation
• Operate on CMM tabletop and portable equipment
• Assist the quality department in reviewing mill certs and other outsourced reports
• Maintain all controlled document files and test records for the required duration as dictated by standards or the customer
• Assist in liaising and handling customers for the final inspection
• Assist in coordinating and relaying QC requirements to vendors

Skills on Resume: 

• Welding Inspection (Hard Skills)
• Drawing Interpretation (Hard Skills)
• Calibration Monitoring (Hard Skills)
• In-house Calibration (Hard Skills)
• Report Generation (Hard Skills)
• CMM Operation (Hard Skills)
• Customer Liaison (Soft Skills)
• Vendor Coordination (Soft Skills)

Job Summary: 

• Direct and monitor the inspection duties of at least one inspector of a lower rating
• Perform assigned work using independently used predetermined methods, operations, setups, and prescribed specifications to perform in-process and completed inspections of products such as machine parts, mechanical assemblies, purchased standard hardware, and the inspections of applied protective coatings, including validation of heat treat
• Perform receiving, first-piece, in-process, and final inspection activities to ensure that everything from raw materials to finished products meets quality and safety standards in the purchasing documentation, engineering standards (BES), and design standards
• Read drawings, interpret dimensions, and tolerances
• Record inspection or test data and quantities inspected
• Reject products and materials not meeting specifications
• Analyze drawings, data, manuals, and other materials to determine specifications, inspection and testing procedures, and measuring instruments required
• Mark items with details of acceptance or rejection status
• Measure dimensions of products to verify conformance to specifications using measuring instruments such as calipers, gauges, and micrometers
• Comply with all quality and HSE policies and procedures

Skills on Resume: 

• Inspection Supervision (Soft Skills)
• Process Inspection (Hard Skills)
• Standard Compliance (Hard Skills)
• Drawing Interpretation (Hard Skills)
• Data Recording (Hard Skills)
• Product Rejection (Hard Skills)
• Specification Analysis (Hard Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Maintain high inspection standards
• Perform inspection stages defined in production procedures
• Support the company's lean manufacturing initiatives and contribute to continuous sustainable improvement activities
• Observe and ensure all product validation tests are accurately recorded and completed to the required specifications
• Review and sentence radiographic examinations to the required test specification and standard
• Perform final inspection of products, ensuring compliance with the drawing and specification
• Ensure labels and serialisation or unique identification meet contract requirements
• Perform visual inspection of final packaged products, ensuring packaging meets contract requirements
• Record job progression in the priority business system, ensuring all routing inspection stages are complete
• Recommend improvements to the production process to ensure quality control
• Perform final review and acceptance of all test documentation before completion of work
• Support the store's function by performing visual, dimensional, and gauging inspection checks of received components to determine acceptance
• Conduct a survey of goods returned for inspection, repair, and test
• Write up reports for customer review

Skills on Resume: 

• Inspection Standards (Hard Skills)
• Process Inspection (Hard Skills)
• Continuous Improvement (Soft Skills)
• Test Validation (Hard Skills)
• Radiograph Review (Hard Skills)
• Final Inspection (Hard Skills)
• Process Improvement (Soft Skills)
• Report Writing (Hard Skills)

Job Summary: 

• Complete first article inspections as well as receiving, in-process, final, and packaging inspections against customer requirements
• Perform testing and inspection at various stages of production, including visual and dimensional inspection
• Ensure customer specifications and quality standards are met
• Ensure compliance with medical device regulations
• Utilize measuring instruments and equipment, such as calipers, comparators, gages, micrometers, etc., to complete various levels of inspection in a timely and accurate manner
• Review blueprints and documentation to ensure appropriate materials are used and specifications are followed
• Test and inspect at various product stages during production for defects such as scratches, burrs, surface finish, and dimensional variances
• Notify leads and other parties of production issues and assist with identifying and correcting problems promptly
• Complete necessary paperwork to fulfill customer requirements and quality requirements, such as recording test data and recording quantities inspected
• Ensure all system transactions are completed and documented
• Monitor equipment to ensure proper operation and calibration

Skills on Resume: 

• First Article (Hard Skills)
• Dimensional Inspection (Hard Skills)
• Specification Compliance (Hard Skills)
• Regulation Adherence (Hard Skills)
• Instrument Utilization (Hard Skills)
• Blueprint Review (Hard Skills)
• Defect Identification (Hard Skills)
• Issue Communication (Soft Skills)

Job Summary: 

• Ensure the quality of manufactured goods by inspecting finished goods
• Examine materials from suppliers before sending them to production
• Inspect components, subassemblies, and assemblies
• Perform quick visual inspections
• Perform complex tests using instruments and equipment
• Test, measure, and analyze products
• Ensure the company is meeting the standard codes in the manufacturing process
• Record the pass or fail grade of products
• Comply with various ISO operating procedures and work instructions
• Observe dials, gauges, and indicators to make sure that a machine is working properly
• Count the number of products tested or inspected
• Process associated documentation, including process tags, rework tags, and nonconforming material documents
• Be responsible for final inspection with signoff and authorizing the product to be moved onto the next steps of the process
• Actively participate in continuous improvement activities to improve the company processes and products
• Comply with all safety and health regulations and maintain the work cell through 5S and housekeeping
• Participate in special projects and other duties as assigned, including Kaizen events and other continuous improvement or lean activities

Skills on Resume: 

• Finished Inspection (Hard Skills)
• Material Examination (Hard Skills)
• Visual Inspection (Hard Skills)
• Complex Testing (Hard Skills)
• Standard Compliance (Hard Skills)
• Documentation Processing (Hard Skills)
• Continuous Improvement (Soft Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Work under direct supervision
• Perform visual inspections using workmanship standards
• Perform inspection of mechanical components
• Fill out applicable QC documents per QC procedures
• Use a computer system daily
• Work under minimal supervision
• Perform inspection of mechanical components
• Inspect sub-assemblies and finished assemblies, requiring the innate ability to learn new inspection techniques
• Read and interpret engineering drawings and specifications
• Interface with production personnel daily
• Set up and use close tolerance precision gaging (bore gaging, sine plates, height gages)
• Perform first article, work in process, final, visual, and FAI inspections
• Read and interpret engineering drawings and specifications with general supervision
• Calibrate and maintain inspection equipment
• Perform inspection at supplier sites
• Interface with design and manufacturing engineers and planners to resolve day-to-day issues

Skills on Resume: 

• Visual Inspection (Hard Skills)
• Mechanical Inspection (Hard Skills)
• QC Documentation (Hard Skills)
• Computer Usage (Hard Skills)
• Drawing Interpretation (Hard Skills)
• Precision Gaging (Hard Skills)
• Equipment Calibration (Hard Skills)
• Engineer Collaboration (Soft Skills)

Job Summary: 

• Perform incoming inspections in accordance with written procedures, statistical sampling plans, drawings, and specifications
• Assist engineers with prototype development tasks
• Maintain and operate inspection and test equipment (multi-meter testers, micrometers, calipers, pin gages, etc.)
• Perform mechanical inspections using calipers, micrometers, optical comparator, optical gaging product (OGP), and other mechanical inspection tools
• Identify non-conforming material and initiate nonconformance reports, participate in material review board (MRB) activities
• Perform quality data entry and reporting to maintain company standards
• Organize and maintain the cleanliness of incoming, in-process, and final inspection stations
• Lead QC procedures, including the training of others
• Perform the various procedures and processes needed to ensure quality products
• Perform PCB electronic inspections per IPC standards with standard electronics test tools, including voltmeters, multimeters, and computer-based analysis programs

Skills on Resume: 

• Incoming Inspection (Hard Skills)
• Prototype Support (Hard Skills)
• Equipment Operation (Hard Skills)
• Mechanical Inspection (Hard Skills)
• Nonconformance Reporting (Hard Skills)
• Data Entry (Hard Skills)
• QC Training (Soft Skills)
• PCB Inspection (Hard Skills)

Job Summary: 

• Perform assigned inspection on raw materials, components, or finished assemblies
• Perform a detailed visual inspection
• Audit the documentation and processes of production departments
• Submit a weekly summary report of inspected material to the lead inspector
• Perform inspection on engineering prototype and suppliers' first article samples and generate inspection reports
• Review technical data packages of assigned source inspection lots
• Review customer specifications and quality notes from the purchase order
• Perform first article inspection per AS9102
• Assist in the calibration of measuring and test equipment
• Assist in the review of customer material returns and the completion of the returned material reports (RMRs)
• Assist in the investigation of customer corrective action and failure analysis requests

Skills on Resume: 

• Material Inspection (Hard Skills)
• Visual Inspection (Hard Skills)
• Process Auditing (Hard Skills)
• Report Preparation (Hard Skills)
• Prototype Inspection (Hard Skills)
• Specification Review (Hard Skills)
• Equipment Calibration (Hard Skills)
• Failure Analysis (Hard Skills)

Job Summary: 

• Perform inspections in the final assembly, in-process, machine shop, molding, returned materials, receiving, plastic molding, and shipping
• Use the internet, CAD system, and blueprints to determine specifications
• Use measuring instruments such as verniers, micrometers, thread gauges, go or no-go gauges, hardness testers, and comparators to measure critical characteristics
• Inspect molded parts, milling, drilling, stamping, grinding, and welding operations to blueprint requirements
• Inspect parts using necessary gauges, including x-ray equipment
• Perform quality audits and inspections in the molding department
• Support continuous improvement activities
• Conduct assembly audits, including picking, packing, and shipping

Skills on Resume: 

• Final Inspection (Hard Skills)
• Specification Review (Hard Skills)
• Instrument Utilization (Hard Skills)
• Operation Inspection (Hard Skills)
• Gauge Inspection (Hard Skills)
• Quality Auditing (Hard Skills)
• Continuous Improvement (Soft Skills)
• Assembly Auditing (Hard Skills)

Job Summary: 

• Act as a professional leader within the organization and as a representative
• Be an effective communicator and leader within the QA department and throughout the organization
• Develop and grow multi-level relationships with customers, suppliers, and auditors
• Develop personal job competency through continuing education
• Mentor and coach fellow professionals
• Follow all released processes related to inspection planning, inspection, and internal customer support
• Suggest improvement of the QA department and organizational processes in support of internal and external customers
• Execute inspection plans for manual, CMM, and vision system inspections
• Support internal customer requests for support related to inspection, measurement strategy, calibration, and other related requests
• Administer recall and collection of measurement and test equipment (M&TE)
• Arrange for internal or supplier calibration purchase orders
• Inspect incoming M&TE and associated certification paperwork after calibration for compliance with requirements

Skills on Resume: 

• Professional Leadership (Soft Skills)
• Effective Communication (Soft Skills)
• Relationship Building (Soft Skills)
• Continuous Learning (Soft Skills)
• Mentor Coaching (Soft Skills)
• Process Improvement (Soft Skills)
• Inspection Execution (Hard Skills)
• Calibration Management (Hard Skills)

Job Summary: 

• Assist with testing and perform inspections as part of the quality program
• Inspect and verify materials for compliance with contract documents
• Write daily inspection reports
• Review construction work plans and inspection checklists
• Ensure accuracy and compliance with contract documents, drawings, and specifications
• Participate in readiness review and pre-activity meeting as part of the quality staff
• Coordinate onsite testing with outside agencies
• Establish and maintain cooperative working relationships
• Review supplier inspection data and collect data

Skills on Resume: 

• Testing Inspection (Hard Skills)
• Material Verification (Hard Skills)
• Report Writing (Hard Skills)
• Plan Review (Hard Skills)
• Specification Compliance (Hard Skills)
• Readiness Participation (Soft Skills)
• Agency Coordination (Soft Skills)
• Data Collection (Hard Skills)

Job Summary: 

• Carry out goods inwards inspection of all bought-in parts in accordance with company procedures, using as reference engineering drawings, purchase orders, or other associated specifications, either national or international
• Perform factory support inspection
• Conduct a review of the documentation supplied with the delivered product against the appropriate internal or external specification
• Conduct normal activities associated with the functional needs of a quality department at the request of supervision
• Provide a consistently high-value, high-quality material control service for all machined goods incoming into the business
• Be capable of setting and maintaining excellent housekeeping standards for the team
• Program and use the CNC CMM to ensure conformance to design standards, making sure full traceability is maintained during the manufacturing process
• Be capable of setting and maintaining personal housekeeping standards

Skills on Resume: 

• Goods Inspection (Hard Skills)
• Factory Support (Hard Skills)
• Document Review (Hard Skills)
• Quality Support (Hard Skills)
• Material Control (Hard Skills)
• Housekeeping Standards (Soft Skills)
• CMM Programming (Hard Skills)
• Process Traceability (Hard Skills)

Job Summary: 

• Perform in-process inspections of sheet metal and electronic enclosures at various stages of the fabrication process
• Perform the first piece of dimensional inspection of the laser-cut sheet metal
• Inspect formed enclosures before welding to check for feature location and overall dimensional requirements
• Inspect the workmanship of weldments on aluminum and steel enclosures
• Inspect welded assemblies after grinding to the final profile for conformity to engineering drawings
• Perform acceptance inspection of special tooling for dimensional conformity to engineering drawings
• Perform acceptance testing of powder-coated enclosures and test coupons
• Perform coating thickness testing of enclosures
• Perform adhesion testing of coupons per ASTM D3359

Skills on Resume: 

• In-process Inspection (Hard Skills)
• Dimensional Inspection (Hard Skills)
• Feature Verification (Hard Skills)
• Weld Inspection (Hard Skills)
• Assembly Inspection (Hard Skills)
• Tooling Acceptance (Hard Skills)
• Coating Testing (Hard Skills)
• Adhesion Testing (Hard Skills)

Job Summary: 

• Perform mandrel bend testing of coupons per ASTM D522
• Perform hardness and scratch resistance testing of coupons per ASTM D3363
• Perform final acceptance inspection of finished enclosures
• Verify in-process inspection records are completed
• Inspect the workmanship of the powder-coated
• Inspect the workmanship of screen-printed markings
• Perform process control testing of the chromate conversion plating line
• Monitor pH, conductivity, and temperature of process solutions
• Coordinate plating of test coupons for outside testing

Skills on Resume: 

• Bend Testing (Hard Skills)
• Hardness Testing (Hard Skills)
• Final Inspection (Hard Skills)
• Record Verification (Hard Skills)
• Coating Inspection (Hard Skills)
• Marking Inspection (Hard Skills)
• Process Testing (Hard Skills)
• Solution Monitoring (Hard Skills)

Job Summary: 

• Collect solution samples for outside testing
• Maintain all process control records
• Document nonconformities, requiring the ability to take photographs and embed them into Microsoft Word documents
• Link inspection plans into the ERP system
• Record all inspection data into a quality database
• Perform periodic quality inspections for conformity to established processes
• Periodically support production and shipping by providing labor
• Periodically support inventory activities
• Periodically perform an incoming inspection of hardware and metal stock

Skills on Resume: 

• Sample Collection (Hard Skills)
• Record Maintenance (Hard Skills)
• Nonconformity Documentation (Hard Skills)
• ERP Linking (Hard Skills)
• Data Recording (Hard Skills)
• Process Inspection (Hard Skills)
• Production Support (Soft Skills)
• Inventory Support (Soft Skills)

Job Summary: 

• Work with Quality and Global Customer Service (GCS) organizations to develop policies, procedures, and methods
• Ensure products and services meet customer and regulatory expectations and requirements
• Act as a source of technical expertise for others
• Assist in creating and training others on SOPs, SWIs, and quality guidelines
• Work with a moderate degree of supervision
• Be accountable for the execution of specific tasks with moderate discretion
• Identify non-compliance within processes and records
• Participate in multiple aspects of customer support, customer and field training, technical support, field service, remediation, audits, and complaint review and analysis
• Support planning, implementation, and tracking of corrective actions and improvements
• Apply knowledge and skills to complete a variety of assignments
• Act as a source of technical expertise for others
• Work within defined process procedures or methodologies and help determine methods and procedures for new assignments
• Be responsible for understanding and developing the complaint process from intake to customer resolution
• Have working knowledge and understanding of Food and Drug Administration (FDA) 21 CFR 820 and International Organization for Standardization (ISO) 13485
• Read and interpret engineering drawings, specifications, and industry workmanship standards
• Maintain accurate documentation and historical records in accordance with departmental procedures and industry regulatory agencies, i.e., FDA and ISO

Skills on Resume: 

• Policy Development (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Technical Expertise (Hard Skills)
• SOP Training (Soft Skills)
• Noncompliance Identification (Hard Skills)
• Customer Support (Soft Skills)
• Corrective Actions (Hard Skills)
• Record Maintenance (Hard Skills)

Job Summary: 

• Perform and coordinate incoming product inspections to ensure quality compliance
• Work with shop employees to identify potential quality issues by examining received products
• Log, track, and analyze quality issues for statistical analysis to determine the cost of quality
• Understand and perform quality tests and measurements
• Support operational quality issues during shop assembly to minimize production downtime
• Conduct and oversee internal inspection audits of assembled products
• Work to identify root causes of non-conforming products and determine solutions to permanently resolve quality issues
• Facilitate quality process improvements in production, receiving, shipping, and inventory tracking
• Provide feedback to operations on quality and safety concerning all products
• Have working knowledge of ISO 9001 requirements and relevant industry-standard practices
• Be proactive in identifying issues and raising concerns to the right management level
• Be knowledgeable in data analysis, analytical interpretation, methodology, and statistical analysis
• Have exposure to MRP and ERP systems

Skills on Resume: 

• Product Inspection (Hard Skills)
• Issue Identification (Hard Skills)
• Data Analysis (Hard Skills)
• Quality Testing (Hard Skills)
• Audit Oversight (Hard Skills)
• Root Cause (Hard Skills)
• Process Improvement (Soft Skills)
• ERP Knowledge (Hard Skills)

Job Summary: 

• Quality Inspector as assigned by quality supervision or management
• Inspect device components and finished devices, follow inspection instructions and established procedures
• Communicate inspection results to quality supervision or management as well as R&D, Engineering, and Materials Management
• File quality documents and records, and maintain quality files
• Perform special assignments under supervision commensurate with experience
• Inspect parts in all aspects of production
• Maintain documentation of parts and processes inspected throughout the day
• Assist QE with floor documentation
• Assist QE on quality alert training on the shop floor

Skills on Resume: 

• Component Inspection (Hard Skills)
• Result Communication (Soft Skills)
• Document Filing (Hard Skills)
• Special Assignments (Soft Skills)
• Production Inspection (Hard Skills)
• Record Maintenance (Hard Skills)
• Documentation Support (Hard Skills)
• Training Assistance (Soft Skills)

Job Summary: 

• Have knowledge of the ISO quality system and all procedures and work instructions directly related to the quality function
• Read and interpret blueprints for specification conformity
• Inspect in-process products for conformance to specifications, performing inspections in all manufacturing departments
• Stop the production process upon encountering in-process quality defects
• Inspect supplier (incoming) material to ensure conformance to specifications
• Ensure that the inspection equipment being used by inspectors and the production line has current calibration information or is removed and repaired
• Maintain computerized records of data on quality defects and solutions
• Notify the lead person or manager of any problems with procedures or equipment to maintain the highest degree of safety, inventory accuracy, and productivity
• Maintain effective working relationships with fellow employees

Skills on Resume: 

• ISO Knowledge (Hard Skills)
• Blueprint Reading (Hard Skills)
• Process Inspection (Hard Skills)
• Defect Detection (Hard Skills)
• Material Inspection (Hard Skills)
• Equipment Calibration (Hard Skills)
• Data Recording (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Create detailed inspection and test plans based on engineering requirements
• Perform first article inspections of parts and assemblies per AS9102
• Perform receiving and incoming material and part inspection
• Document inspection results by completing reports and logs, and correctly and carefully input data into the quality database
• Perform conformity inspections according to FAA requirements
• Resolve and disposition nonconforming product data recording and reporting
• Create supplier corrective action reports and communicate nonconformances with suppliers
• Assist in developing an effective, efficient, and consistent quality management system in compliance with FAA Part 21 and AS9100
• Train employees on the quality management system and FAA production certificate requirements

Skills on Resume: 

• Inspection Planning (Hard Skills)
• First Article (Hard Skills)
• Material Inspection (Hard Skills)
• Result Documentation (Hard Skills)
• Conformity Inspection (Hard Skills)
• Nonconformance Reporting (Hard Skills)
• Supplier Communication (Soft Skills)
• QMS Training (Soft Skills)

Job Summary:  

• Inspect parts at the start, middle, and end of production runs within the rework area
• Communicate and document any identified defects
• Communicate concerns that are not being properly resolved in the immediate work area
• Comprehend current production quality standards and determine if a product meets those standards
• Communicate emerging and trending quality issues to prevent negative impact on the factory
• Construct and maintain strong relationships with members of all nearby teams
• Provide quality reworked or inspected products within the design specification for production use
• Use computers and software programs to document and communicate inspection results

Skills on Resume: 

• Production Inspection (Hard Skills)
• Defect Documentation (Hard Skills)
• Issue Communication (Soft Skills)
• Standard Compliance (Hard Skills)
• Quality Reporting (Soft Skills)
• Team Relationships (Soft Skills)
• Rework Quality (Hard Skills)
• Computer Usage (Hard Skills)

Job Summary: 

• Proceed with qualified, routine, and non-routine quality tasks
• Apply specialized quality systems, equipment, tools, and methods
• Initiate actions according to guidelines when quality does not match the standards
• Respond to quality-related enquiries and act as the first point of contact on subject matters
• Manage the quality-related activities with involved internal and external parties
• Ensure the implementation and improvement of the quality part of the integrated management system, including process management, for the respective organization unit according to the quality strategy and respective local regulations
• Contribute to product safety activities and ensure the quality reporting
• Assess whether the quality of components produced within the facility meets the required standards
• Work within a team to effectively resolve quality issues and ensure work is being completed to plan

Skills on Resume: 

• Quality Tasks (Hard Skills)
• System Application (Hard Skills)
• Standard Enforcement (Hard Skills)
• Inquiry Response (Soft Skills)
• Activity Management (Soft Skills)
• Process Improvement (Hard Skills)
• Product Safety (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Inspect physical goods based on measurement reports, drawings and specifications, and certificates using penetrant inspections and required measuring equipment
• Take over the products from suppliers or release them remotely based on the necessary information gathered in advance
• Read technical drawings and specifications to ensure the product conforms to specifications
• Be the point of contact for suppliers regarding quality problems, including assessment of welding requests and concession reports
• Handle non-conformities up to and including the first repair and correction
• Initiate corrective and preventive measures (8D)
• Record all inspection results in the database
• Complete all associated documentation, including quality control reports, sign-off on drawings, create as-built drawings, etc.
• Calibrate measuring and test equipment

Skills on Resume: 

• Goods Inspection (Hard Skills)
• Supplier Release (Hard Skills)
• Drawing Interpretation (Hard Skills)
• Supplier Communication (Soft Skills)
• Nonconformity Handling (Hard Skills)
• Corrective Actions (Hard Skills)
• Result Recording (Hard Skills)
• Equipment Calibration (Hard Skills)

Job Summary: 

• Prepare, analyze, and create non-conformities (NCs) in aircraft production
• Evaluate technical complaints and develop solutions
• Create, process, and follow up on complaint reports from structural, equipment, or final assembly
• Support the creation of inspection SOIs, as well as production and work orders
• Process and prepare KPI reports
• Analyze processes and implement improvement measures
• Provide manufacturing engineering support for quality inspections in aircraft production
• Perform source inspections, in-process inspections, and final inspections
• Work closely with manufacturing, QA, and operations teams on assigned continuous improvement projects

Skills on Resume: 

• Nonconformity Management (Hard Skills)
• Complaint Evaluation (Hard Skills)
• Report Processing (Hard Skills)
• Order Support (Hard Skills)
• KPI Reporting (Hard Skills)
• Process Improvement (Soft Skills)
• Engineering Support (Hard Skills)
• Inspection Execution (Hard Skills)

Job Summary: 

• Ensure compliance with policy regarding quality management
• Develop, in consultation with other stakeholders, any new methods that further enhance the QA procedure
• Play an active role in providing support to all involved in the workshop process to ensure commitment to policies and procedures in relation to QA is understood and adhered to
• Liaise with the planning and estimating team to establish quality and compliance requirements for fabrication and welding work for planned overhauls and repairs
• Develop quality plans for fabrication and welding work in accordance with appropriate procedures, specifications, and standards
• Design and develop quality documents to support fabrication and welding quality plans
• Ensure components are tested and inspected and the technical documentation and manuals required are completed in accordance with specifications
• Provide onboarding training to new employees about dimensional and visual inspection, support the production team at quality inspection requirements and methods
• Communicate with customers about concession requests for non-conforming products

Skills on Resume: 

• Policy Compliance (Hard Skills)
• Method Development (Hard Skills)
• Workshop Support (Soft Skills)
• Team Liaison (Soft Skills)
• Quality Planning (Hard Skills)
• Document Development (Hard Skills)
• Employee Training (Soft Skills)
• Customer Communication (Soft Skills)

Job Summary: 

• Carry out incoming and final inspection (Q-flags, Q-hold, end of line inspection)
• Support the FAIR and PPAP activity
• Support complaints handling and associated KPI reporting
• Support the internal audit program, including FOD and 5S
• Support stock inspection, internal and external
• Support handling and processing of returned parts
• Support the calibration process
• Support continuous improvement initiatives
• Support the upkeep of the quarantine bond

Skills on Resume: 

• Incoming Inspection (Hard Skills)
• FAIR Support (Hard Skills)
• Complaint Handling (Soft Skills)
• Audit Support (Hard Skills)
• Stock Inspection (Hard Skills)
• Returned Parts (Hard Skills)
• Calibration Support (Hard Skills)
• Process Improvement (Soft Skills)

Job Summary: 

• Execute technical inspections in the production process of the aircraft in the context of the authorization of the manufacturer's operation
• Prepare and perform visual, incoming, first article, and final inspections during the aircraft manufacturing process in compliance with design specifications, customer and certification requirements
• Use SAP-based and SAL-based IT systems to document the technical inspections performed in the production orders by inspection ark
• Complete other aircraft documents, as well as prepare first article inspection reports
• Support troubleshooting and participate in quality survey requests
• Compile all non-conformance technical data to launch the SAP-based quality discrepancy sheets for professional assessment in accordance with the manufacturing engineering documentation
• Document all technical inspector results in the SAP-based IT system
• Verify that information on the submission form matches the identifying sticker on the outside of the box
• Maintain working knowledge of government and industry quality assurance standards

Skills on Resume: 

• Technical Inspection (Hard Skills)
• Final Inspection (Hard Skills)
• SAP Documentation (Hard Skills)
• Report Preparation (Hard Skills)
• Troubleshooting Support (Soft Skills)
• Data Compilation (Hard Skills)
• Result Recording (Hard Skills)
• Standards Knowledge (Hard Skills)

Job Summary: 

• Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards
• Select products for evaluation at specified stages in the production process and inspect products for qualities such as dimensions, cleanliness, paint quality, and appearance
• Record data, applying statistical quality control procedures
• Evaluate data and write reports to validate or indicate deviations from existing standards
• Recommend modifications of existing quality or production standards to achieve optimum quality within the limits of equipment capability
• Set up and perform destructive and nondestructive tests on materials, parts, or products to measure performance, life, or material characteristics
• Prepare graphs or charts of data or enter data into a computer for analysis on topics such as Part Production Approval Process (PPAP), control plans, gage repeatability, and process capability studies
• Investigate, implement corrective action processes, and finalize all quality-related issues initiated by third-party sources
• Provide a constant line of communication to all involved parties to ensure prompt resolution and a high level of customer service

Skills on Resume: 

• Drawing Interpretation (Hard Skills)
• Product Evaluation (Hard Skills)
• Data Recording (Hard Skills)
• Report Writing (Hard Skills)
• Standard Modification (Hard Skills)
• Material Testing (Hard Skills)
• Data Analysis (Hard Skills)
• Issue Resolution (Soft Skills)

Job Summary: 

• Perform daily quality inspections of finished, in-process, and received product according to the inspection and test plan
• Maintain accurate and precise records, including inspection and non-conformance reports
• Maintain a safe, clean, and organized working environment
• Perform inspection of parts to specifications using calipers, gauges, tape measures, and other mechanical inspection hand tools and reading drawings
• Assist in the troubleshooting of materials in the manufacturing areas
• Investigate root cause analysis for quality issues and assist in problem-solving
• Perform data entry and computations on defined quality forms
• Utilize calipers and micrometers to facilitate the inspection process
• Evaluate any problem areas and make recommendations for improvements to management

Skills on Resume: 

• Quality Inspection (Hard Skills)
• Record Maintenance (Hard Skills)
• Workplace Safety (Soft Skills)
• Part Inspection (Hard Skills)
• Troubleshooting Support (Soft Skills)
• Root Cause (Hard Skills)
• Data Entry (Hard Skills)
• Process Improvement (Soft Skills)

Job Summary: 

• Work from drawings, procedures, and specifications utilizing non-complex measuring devices to perform inspection of purchased parts, materials, components, electronic hardware, and equipment as materials are received from vendors or subcontractors
• Verify shipping paperwork, part labeling, part count, and packaging
• Inspect in-process and finished production assemblies and subassemblies for conformance to drawings and quality assurance standards
• Assist in determining methods, sequences, and procedures necessary for inspection
• Interpret and apply the requirements of industry workmanship standards, ES procedures, and EPS procedures in the inspection process
• Identify the condition (problem) and write up non-conformances in a clear, concise way
• Review, validate, and correct FAI paperwork from suppliers
• Perform verification of manufacturing documents with component and device drawings
• Control inventory to ensure appropriate storage conditions and movement

Skills on Resume: 

• Part Inspection (Hard Skills)
• Paperwork Verification (Hard Skills)
• Assembly Inspection (Hard Skills)
• Method Determination (Hard Skills)
• Standard Interpretation (Hard Skills)
• Nonconformance Reporting (Hard Skills)
• FAI Validation (Hard Skills)
• Inventory Control (Hard Skills)

Job Summary: 

• Read prints, work instructions, and specifications to ensure that operations meet production and finished goods standards established by the BU
• Recommend any necessary adjustments and changes to the rework and VAS process to ensure proper quality control
• Inspect and test the materials and finished goods for multiple brands and products
• Use tools such as micrometers, pin gages, printers, screw gauges, etc., to measure and test products and parts
• Place products and finished goods on hold that do not meet established quality standards and recommend strategies to improve product quality
• Accept or reject finished products and discuss inspection results with the BU quality team and local distribution team
• Perform inspections at random to assess product quality
• Read blueprints and other specifications to obtain product information
• Assure control of nonconforming product and material to established procedures

Skills on Resume: 

• Specification Reading (Hard Skills)
• Process Adjustment (Soft Skills)
• Material Testing (Hard Skills)
• Tool Utilization (Hard Skills)
• Quality Control (Hard Skills)
• Product Disposition (Hard Skills)
• Random Inspection (Hard Skills)
• Nonconformance Control (Hard Skills)

Job Summary: 

• Check the conformity of the parts based on engineering drawings and technical books
• Identify the damage responsibility following customer and transportation claims
• Put in place a warehouse audit and take appropriate actions in case of customer claims or following a request from the helpdesk
• Analyze customer returns and validate the credit or reject parts
• Adhere to and update procedures relative to the quality of service
• Be in charge of the administrative and physical return of non-compliant parts to the customers
• Follow the work in process report (inbound flow)
• Release deliveries or products and services that meet expectations
• Document the results of the inspection in the respective IT systems

Skills on Resume: 

• Part Conformity (Hard Skills)
• Damage Analysis (Hard Skills)
• Warehouse Auditing (Hard Skills)
• Return Analysis (Hard Skills)
• Procedure Updating (Hard Skills)
• Return Management (Hard Skills)
• Delivery Release (Hard Skills)
• Result Documentation (Hard Skills)

Job Summary: 

• Provide quality oversight and support for the assembly of rockets
• Perform inspection, verification, and analysis to evaluate the quality of products against design and process requirements
• Communicate effectively, in both written and verbal formats, with engineering, management, and production personnel to convey product acceptance criteria and inspection results
• Properly document and process non-conformances and suspect conditions
• Comply with safety regulations and promote a safe working environment
• Prepare reports detailing tests conducted and results
• Proactively review contractor plans to ensure the materials and procedures will pass quality testing
• Log all instances of non-conformance
• Administer all nonconformity to closure or concession

Skills on Resume: 

• Quality Oversight (Hard Skills)
• Product Evaluation (Hard Skills)
• Effective Communication (Soft Skills)
• Nonconformance Processing (Hard Skills)
• Safety Compliance (Soft Skills)
• Report Preparation (Hard Skills)
• Plan Review (Hard Skills)
• Quality Testing (Hard Skills)

Job Summary: 

• Review protocols, qualifications, and validation procedures documented by the organization
• Audit and monitor quality requirements by performing detailed inspections in accordance with quality assurance policies and customer specifications
• Investigate non-conformance issues or discrepant materials and assist in resolving issues to ensure final inspection clearance
• Verify goods comply with regulated protocols
• Perform complex surface plate layout
• Use various gauges and coordinate measuring and point verification to ensure product compliance
• Complete inspection reports and findings for proper documentation and correction
• Analyze and report on suppliers' compliance with specification documents
• Review products for labeling and marking requirements, including instructions, as per product specification documents

Skills on Resume: 

• Protocol Review (Hard Skills)
• Quality Auditing (Hard Skills)
• Issue Investigation (Hard Skills)
• Regulation Verification (Hard Skills)
• Layout Inspection (Hard Skills)
• Gauge Utilization (Hard Skills)
• Report Documentation (Hard Skills)
• Supplier Analysis (Hard Skills)

Job Summary: 

• Perform incoming inspection for component or subassembly materials received for production and engineering project activity
• Investigate causes of quality problems identified at incoming inspection, manufacturing, and final QC inspection
• Develop and validate various test methods utilized at incoming inspection for both component and subassembly inspections
• Analyze trends from inspections and supplier quality performances to determine action limits, and then recommend and implement corrective actions when indicated
• Perform technical inspections to ascertain why no signals were received during burglaries (BNS)
• Complete technical installations or technical service calls
• Retrieve alarm event buffers via direct PC link (DSC, CADDX, Paradox, Texecom, and IDS)
• Analyze and reconstruct event buffers to verify event times and dates as well as armed status
• Provide detailed and informative feedback on findings and requirements

Skills on Resume: 

• Incoming Inspection (Hard Skills)
• Problem Investigation (Hard Skills)
• Test Validation (Hard Skills)
• Trend Analysis (Hard Skills)
• Corrective Actions (Hard Skills)
• Technical Inspection (Hard Skills)
• Event Analysis (Hard Skills)
• Feedback Reporting (Soft Skills)