Job Summary: 

• Perform mechanical and electrical hardware inspection.
• Verify geometric dimensioning and tolerancing against engineering drawings.
• Utilize measurement devices and tools such as calipers, height gauge, optical comparator, micrometers, scales and dimensional measurement systems.
• Utilize surface plates, precision measuring tools, gauge blocks and other mechanical inspection tools or tooling.
• Access drawings and inspection instructions and document non-conformances.
• Perform visual inspections of hardware using a microscope and a magnifying lens.
• Review supplier documentation for adherence to quality clauses and drawing notes.
• Initiate a nonconformance report describing and photographing discrepancies.
• Make recommendations for solutions and use knowledge and experience to resolve issues.

Skills on Resume: 

• Mechanical Inspection (Hard Skills)
• Electrical Inspection (Hard Skills)
• GD&T Verification (Hard Skills)
• Precision Measurement (Hard Skills)
• Visual Inspection (Hard Skills)
• Documentation Review (Hard Skills)
• Problem Solving (Soft Skills)
• Issue Resolution (Soft Skills)

Job Summary: 

• Reflect role model behavior in which others want to learn from, always do the right thing, be able to make tough calls, take ownership for the team, encourage team participation and quality work product.
• Act in a mentoring capacity and openly share skills and experiences with others to selflessly grow and develop team members.
• Motivate and support others to help the team achieve success.
• Exhibit and maintain a friendly, professional demeanor while developing positive rapport with team members.
• Inspect parts before the cleaning and NDT processes.
• Perform bench inspection of parts after the cleaning and NDT processes.
• Provide complete and accurate documentation to support engine build.
• Meet production or inspection goals and objectives for the facility.
• Complete and review technical documentation including fits and clearances, engine inspection report EIR and SAP.
• Complete and review the engine package documentation.
• Enter and reconcile the engine shop visit report ESVR.
• Demonstrate commitment to the EHS and continuous improvement programs by following all policies and procedures, completing all required training and supporting all applicable committee activities.

Skills on Resume: 

• Role Modeling (Soft Skills)
• Team Mentoring (Soft Skills)
• Team Motivation (Soft Skills)
• Positive Rapport (Soft Skills)
• Parts Inspection (Hard Skills)
• Technical Documentation (Hard Skills)
• Engine Reporting (Hard Skills)
• Continuous Improvement (Soft Skills)

Job Summary: 

• Manage preparations for upcoming parts or CMM programs to ensure limited CMM downtime.
• Program, set up and operate CMM, laser tracker, FARO arm and manual layout.
• Use design data to inspect machined and received components.
• Perform first article, in-process, final and receiving inspections.
• Provide feedback to machinists and engineers with dimensional data.
• Document, track and complete discrepancy reports.
• Maintain and track all inspection equipment calibrations.
• Maintain configuration control on files and job records.

Skills on Resume: 

• CMM Programming (Hard Skills)
• Equipment Operation (Hard Skills)
• Component Inspection (Hard Skills)
• Process Inspection (Hard Skills)
• Dimensional Feedback (Soft Skills)
• Discrepancy Reporting (Hard Skills)
• Calibration Management (Hard Skills)
• Configuration Control (Hard Skills)

Job Summary: 

• Provide inspection, testing and service for fire alarm equipment to comply with NFPA 72 standards as well as state and local codes.
• Complete required documentation, including deficiency repair recommendations.
• Follow and maintain highly structured inspection schedules.
• Maintain complete and accurate documentation of all tests performed.
• Generate reports within Siemens tools and upload to city municipality websites.
• Perform minor service and deficiency repairs on all fire alarm system types.
• Complete service ticket documentation before leaving the customer site.
• Provide instructions to customer personnel regarding proper operations and routine inspections.
• Adhere to local, corporate and OSHA safety policies and procedures.

Skills on Resume: 

• Fire Alarm Inspection (Hard Skills)
• Code Compliance (Hard Skills)
• Schedule Management (Soft Skills)
• Test Documentation (Hard Skills)
• Report Generation (Hard Skills)
• Deficiency Repairs (Hard Skills)
• Customer Instruction (Soft Skills)
• Safety Adherence (Soft Skills)

Job Summary: 

• Execute and deliver quality objectives, quality improvement plan and trends against the quality key performance indicators to drive continuous improvement.
• Monitor quality performance and key performance indicators assigned to third parties to ensure quality and compliance issues are identified, communicated and resolved.
• Support the local change control process to ensure all planned major changes are effectively and compliantly managed.
• Perform activities to support the risk management process to ensure effective management, timely reporting, review and escalation of quality risks.
• Develop local processes to conduct root cause analysis.
• Identify where corrective or preventative action plans are required and ensure they are effectively implemented, monitored and closed out.
• Support the complaints management process to ensure potential issues are determined quickly, linked to the adverse events, reported and follow up on product complaints.
• Liaise with external suppliers for products that are manufactured by contractors to ensure compliance with local registered technical details.

Skills on Resume: 

• Quality Metrics (Hard Skills)
• Continuous Improvement (Hard Skills)
• Change Control (Hard Skills)
• Risk Management (Hard Skills)
• Root Cause (Hard Skills)
• Corrective Actions (Hard Skills)
• Complaints Handling (Hard Skills)
• Supplier Compliance (Hard Skills)

Job Summary: 

• Support the quality manager to ensure that an effective local product incident process is in place and manage any product quality-related issues and train staff.
• Work daily to support systems that have an impact on the quality of imported products and ensure that the products are in line with the quality management system.
• Liaise with manufacturing sites to ensure compliance with local registered technical details.
• Ensure the timely release of imported finished goods deliveries and resolve quality-related issues from deliveries.
• Communicate with global manufacturing supply sites regarding regional quality as it relates to approval of repacking activities and resolving quality issues with the product supplied.
• Perform daily support of repacking to ensure batch release orders are compliant and meet regulatory guidelines before distribution and or re-export.
• Ensure all product specifications and related documents are maintained and compliant with the current registered details.
• Support the quality manager in ensuring that product storage and distribution performed by third-party warehousing and distribution service providers complies with standards.
• Ensure appropriate documentation of batch records and retention of samples.

Skills on Resume: 

• Incident Management (Hard Skills)
• Staff Training (Soft Skills)
• Quality Systems (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Delivery Resolution (Hard Skills)
• Global Communication (Soft Skills)
• Batch Release (Hard Skills)
• Document Control (Hard Skills)

Job Summary: 

• Monitor and report quality assurance and quality control aspects of the required work scope packages.
• Control and ensure the accuracy of all project documentation related to API 6A.
• Control and ensure the accuracy of all required parts.
• Complete various inspection and quality reports.
• Complete mechanical and inspection reports to the required standard.
• Ensure the traceability of all parts required and the documentation trail is in place.
• Record and document traceable information that will be required to certify the manufacturing process to the highest standards.
• Interpret API standards and client requirements to ensure the relevant standards are met in relation to the product.
• Identify engineering faults and process inputs throughout key stages of component manufacture from order acknowledgement to final inspection.
• Recommend adjustments to the process.

Skills on Resume: 

• Quality Monitoring (Hard Skills)
• Document Control (Hard Skills)
• Parts Accuracy (Hard Skills)
• Inspection Reporting (Hard Skills)
• Mechanical Inspection (Hard Skills)
• Parts Traceability (Hard Skills)
• Standards Interpretation (Hard Skills)
• Process Improvement (Hard Skills)

Job Summary: 

• Check produce in slots daily to make certain the product that is set up for shipping is up to acceptable standards.
• Communicate with buyers all quality issues and assist them in resolving them to ensure the customer receives the highest quality products possible.
• Ensure products are being rotated properly during daily slot checking and communicate any problems with rotation to the stockers and or supervisors responsible.
• Monitor variance reports for accurate accounting of spoilage, warehouse damage, truck damage, etc.
• Greet all internal and external customers in a friendly and efficient manner to ensure that proper customer service is maintained and customer satisfaction and organizational efficiency are enhanced.
• Inspect inbound freight, warehoused product and or outbound product and document product condition.
• Correspond regularly with necessary parties on the company's status regarding product quality.
• Analyze, identify and propose action to solve problems associated with quality assurance.
• Observe all safety rules, regulations and sanitation policies.

Skills on Resume: 

• Product Inspection (Hard Skills)
• Issue Resolution (Soft Skills)
• Stock Rotation (Hard Skills)
• Variance Monitoring (Hard Skills)
• Customer Service (Soft Skills)
• Freight Inspection (Hard Skills)
• Quality Communication (Soft Skills)
• Problem Solving (Soft Skills)

Job Summary: 

• Perform final inspection of laminate panels to ensure product meets customer specifications.
• Utilize micrometers and various other measuring and quality control instruments to maintain consistent product performance.
• Operate the computer to obtain work orders or schedule and inventory existing supplies.
• Make product-specific shipping boxes as per specifications on the work order.
• Perform and record all in-process inspection or testing relating to maintaining product traceability and run documentation.
• Communicate with various departments such as quality, shipping and value-added relative to product quality issues and availability of material for further processing or shipping.
• Perform scheduled housekeeping by removing debris from the work station area, sweeping and vacuuming.
• Perform cycle counting to ensure inventory accuracy.
• Perform nonconforming material process, including DMRs and hold tags.

Skills on Resume: 

• Final Inspection (Hard Skills)
• Precision Measurement (Hard Skills)
• Work Orders (Hard Skills)
• Box Fabrication (Hard Skills)
• Process Documentation (Hard Skills)
• Interdepartmental Communication (Soft Skills)
• Housekeeping Maintenance (Hard Skills)
• Inventory Control (Hard Skills)
• Material Nonconformance (Hard Skills)

Job Summary: 

• Read and interpret specifications relating to product requirements and verify that all requirements are met before shipment.
• Inspect product to appropriate workmanship standards, work instructions and or other specifications.
• Perform necessary record keeping or labeling, including weights, part numbers, lot numbers, serial numbers, sizes and amounts.
• Visually inspect the part, complete required computer transactions and understand the safety protocol for lifting and handling.
• Visually inspect all products and product packaging and ensure compliance with all customer and in-house requirements.
• Initiate, maintain and update all packaging procedures, record each procedure by filing updated material on the computer and initiate change requests for the procedure manual.
• Maintain customer specification files.
• Generate and review the certificate of compliance or analysis CofC or A, the supplier inspection report SIR, the manufacturing traveler and all labeling for completion and accuracy.
• Check results of chemical analysis against customer and internal standards on all outgoing shipments.
• Participate in problem resolution pertaining to production or quality.

Skills on Resume: 

• Specification Interpretation (Hard Skills)
• Product Inspection (Hard Skills)
• Record Keeping (Hard Skills)
• Safety Compliance (Hard Skills)
• Packaging Inspection (Hard Skills)
• Procedure Management (Hard Skills)
• File Maintenance (Hard Skills)
• Compliance Documentation (Hard Skills)

Job Summary: 

• Recommend changes to processes and procedures which will improve safety, quality and efficiency.
• Clean and package parts while maintaining the integrity of the Class 1000 protocol, wearing a protective mask, suit, gloves, etc.
• Be responsible for providing appropriate customer samples and interacting with production personnel and support groups for information regarding the correct size, alloy and lot number.
• Use packaging equipment such as bar sealers, electronic balance, cleaning racks, ultrasonic, CMM and argon or vacuum equipment.
• Perform daily job functions in accordance with policies from EHS, quality and housekeeping.
• Support and participate in all structured safety process activities for this job classification as outlined in the site SSP manual.
• Support the operating system.
• Seek opportunities for improvement and take corrective action on one's own initiative.
• Actively participate in the continuous improvement process, own ideas through the PDCA cycle, including asking co-workers for their input.
• Immediately resolve a quality issue or seek technical expertise to resolve the issue.

Skills on Resume: 

• Process Improvement (Hard Skills)
• Class Protocol (Hard Skills)
• Customer Interaction (Soft Skills)
• Equipment Operation (Hard Skills)
• Policy Compliance (Hard Skills)
• Safety Participation (Soft Skills)
• Continuous Improvement (Soft Skills)
• Issue Resolution (Soft Skills)

Job Summary: 

• Perform visual and dimensional inspection on sheet metal and machined parts and assemblies.
• Verify conformance to blueprints, mylars, specifications and check tools per PO requirements.
• Verify incoming product from vendors and customers for certification as well as product conformance.
• Undertake any project as it relates to customer hardware for C and C or A investigation, research as to adequacy of inspection methods or training of other inspectors for specific job functions.
• Complete required documentation for shipment of product to customer.
• Document non-conformances and generate sketches.
• Interface with customer quality representatives for part acceptance.
• Interface with vendors, internal or external and customer or government agencies.
• Assist fellow inspectors with the handling of parts and or tooling.

Skills on Resume: 

• Visual Inspection (Hard Skills)
• Blueprint Verification (Hard Skills)
• Product Conformance (Hard Skills)
• Inspection Research (Hard Skills)
• Documentation Preparation (Hard Skills)
• Nonconformance Reporting (Hard Skills)
• Customer Interaction (Soft Skills)
• Team Assistance (Soft Skills)

Job Summary: 

• Perform proper required inspection item RII inspections and documentation thereof in accordance with the continued airworthiness maintenance program CAMP and FAA regulations.
• Perform C-check, line maintenance, or RON and receiving inspections.
• Perform light and or intricate cleaning as directed by the supervisor of the department.
• Monitor maintenance, workmanship and materials to verify compliance with applicable approved published procedures, including company and FAA rules, regulations and standards.
• Perform on-site quality control monitoring of work performed on company aircraft.
• Audit completed aircraft records, including logbook pages, work cards, non-routines, engineering documents, EOs, EAs and other related documents generated by C-check, RON and line maintenance.
• Monitor the proper completion of aircraft records, including logbook pages, work cards, non-routines, engineering documents, EOs, EAs and other related documents during C-check, RON and line maintenance.
• Actively participate in the improvement of the continued airworthiness maintenance program CAMP by identifying concerns and providing documented suggestions for resolution, including PCRs.
• Assist in receiving inspection and conduct periodic inspections and audits of vendors, line stations and contract overhaul agencies.
• Assist with the continuing analysis and surveillance system CASS audit program for internal departments involved in day-to-day operations.

Skills on Resume: 

• RII Inspection (Hard Skills)
• Line Maintenance (Hard Skills)
• Cleaning Procedures (Hard Skills)
• Compliance Monitoring (Hard Skills)
• Quality Control (Hard Skills)
• Record Auditing (Hard Skills)
• Program Improvement (Soft Skills)
• Vendor Auditing (Hard Skills)

Job Summary: 

• Perform on-the-job training OJT in various functions such as NDT, RII, borescope and receiving inspection as directed by the supervisor of the department.
• Ensure accuracy and completeness of all assigned work documents and records.
• Maintain currency on all revisions to company manuals.
• Research all pertinent information and material for work scheduled on the aircraft.
• Make FMIS and Empower entries.
• Follow all safety rules and regulations to maintain a safe working environment for all employees.
• Assist in the daily cleaning after each shift of quality control work areas and other areas as directed by the supervisor of the department.
• Follow the company's guidelines provided in the employee handbook, except for those specific areas governed by a collective bargaining agreement.
• Perform other duties as directed by the supervisor of the department.
• Acquire, hold and maintain borescope inspection capabilities and execute borescope inspections.

Skills on Resume: 

• OJT Training (Soft Skills)
• Work Documentation (Hard Skills)
• Manual Updates (Hard Skills)
• Information Research (Hard Skills)
• System Entries (Hard Skills)
• Safety Compliance (Hard Skills)
• Workplace Cleaning (Hard Skills)
• Borescope Inspection (Hard Skills)

Job Summary: 

• Provide input for inspection methods and improvements of inspection techniques.
• Assist the material review board in the investigation of dimension-related complaints.
• Use statistical analysis to determine characteristic acceptability.
• Write non-conformance material reports and be familiar with the process of quarantining products.
• Perform first articles and layout inspection for PPAP and aerospace parts.
• Complete accurate records on paper and electronic data to provide excellent results.
• Use measurement hand tools and equipment properly and accurately.
• Work in teams with others as both a leader and an individual contributor.
• Perform visual and dimensional inspections of blanks and finished parts.
• Determine the proper sampling needed to meet customer and industry requirements.
• Assist with monthly calibrations and the calibration database.
• Program inspection equipment for automated measurements.

Skills on Resume: 

• Inspection Methods (Hard Skills)
• Complaint Investigation (Hard Skills)
• Statistical Analysis (Hard Skills)
• Nonconformance Reporting (Hard Skills)
• First Article (Hard Skills)
• Record Accuracy (Hard Skills)
• Measurement Tools (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Assist in the preparation and completion of quality documentation.
• Implement and maintain agreed quality procedures.
• Understand manual inspection techniques and be hands-on.
• Notify the line supervisor of any quality issues.
• Maintain component traceability systems.
• Carry out regular in-process and final inspections.
• Perform CMM inspection and produce FAI reports.
• Inspect composite tooling to design data.
• Enter appropriate records into QA and production databases.
• Support production in meeting delivery targets.

Skills on Resume: 

• Quality Documentation (Hard Skills)
• Procedure Implementation (Hard Skills)
• Manual Inspection (Hard Skills)
• Issue Reporting (Soft Skills)
• Traceability Systems (Hard Skills)
• Process Inspection (Hard Skills)
• CMM Inspection (Hard Skills)
• Tooling Inspection (Hard Skills)

Job Summary: 

• Set up and perform liquid penetrant tests on used machine parts.
• Interpret indications and document test results.
• Discuss safety-relevant indications with the product safety officer.
• Support visual inspection of used machine parts.
• Support cleaning of machine parts to alleviate temporary peaks in workload.
• Maintain a clean and organized work environment.
• Follow all applicable QHSE rules and regulatory requirements.
• Support internal and external audits and visits.

Skills on Resume: 

• Penetrant Testing (Hard Skills)
• Result Documentation (Hard Skills)
• Safety Discussion (Soft Skills)
• Visual Inspection (Hard Skills)
• Parts Cleaning (Hard Skills)
• Workplace Organization (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Audit Support (Hard Skills)

Job Summary: 

• Use predetermined methods, operations, setups and prescribed specifications to inspect in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects and various product characteristics.
• Use various measuring devices such as dial indicators, smart tweezers, micrometers, scales, fixtures, CMM, 3D scanners, calipers, gauge pins, go or no go gauges and other measuring or testing devices.
• Be familiar with manufacturing processes and related in-process inspection and product acceptance techniques.
• Accept or reject defective or nonconforming material or units.
• Work from drawings, visual aids, customer specifications, inspection instructions or checklists.
• Monitor and verify quality in accordance with statistical process or other control procedures.
• Record acceptance or rejection criteria using SAP, Access or Excel databases.
• Assist in compiling field data in report form for review by the project designer.

Skills on Resume: 

• Product Inspection (Hard Skills)
• Measuring Devices (Hard Skills)
• Process Knowledge (Hard Skills)
• Defect Rejection (Hard Skills)
• Drawing Interpretation (Hard Skills)
• Quality Monitoring (Hard Skills)
• Data Recording (Hard Skills)
• Report Compilation (Hard Skills)

Job Summary: 

• Pick up samples of solutions, components, cartridges, raw materials and chemicals.
• Prepare samples for visual and gauge inspections and testing.
• Record results and make distribution to various areas, making sure that all forms or records are correct and samples are kept segregated.
• Perform inspections and tests in accordance with the appropriate approved product quality inspection plan, PCTS, SOPs, Mil-Specs, drawings and standard practices to determine if the product meets specifications.
• Operate equipment such as Tukon, Rockwell, milling, polishing wheel, simplex gauging machines, weigh scales, band saw, vacuum leak test and other associated equipment.
• Maintain equipment and work area in a clean and safe condition.
• Obey safety rules and regulations and wear proper safety equipment.
• Work safely, follow all safety rules and report any potential safety hazards to management.
• Be responsible for ensuring the work area is clean and organized per 5S standards.

Skills on Resume: 

• Sample Collection (Hard Skills)
• Sample Preparation (Hard Skills)
• Result Recording (Hard Skills)
• Product Testing (Hard Skills)
• Equipment Operation (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Safety Compliance (Hard Skills)
• Workplace Organization (Hard Skills)

Job Summary: 

• Perform inspection of supplier returned repair parts against repair documents and ensure documentation meets certification requirements.
• Perform CMM measurements for dimensional verification of repair requirements.
• Continuously improve the inspection process to ensure repair parts are cleared to stores.
• Perform inspection of materials receipt and issue the QA label and the shelf life label.
• Perform outgoing inspection of parts from stores that are assigned to the customer.
• Perform scanning and archiving of incoming receipt documents.
• Perform secondary duties, including the receipt of parts for stores.
• Interpret requirements and specifications such as drawings, purchase orders, procedures, work instructions and change orders and apply them to parts and assemblies received and produced.
• Document the criteria and results on receiving documentation and the TipQA software program.

Skills on Resume: 

• Parts Inspection (Hard Skills)
• CMM Measurement (Hard Skills)
• Process Improvement (Soft Skills)
• Material Receipt (Hard Skills)
• Outgoing Inspection (Hard Skills)
• Document Archiving (Hard Skills)
• Requirement Interpretation (Hard Skills)
• Quality Documentation (Hard Skills)

Job Summary: 

• Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances, including an understanding of maximum material conditions.
• Inspect detailed parts and assemblies per drawing requirements and specifications using standard measuring equipment.
• Perform layout of castings and assemblies per drawing requirements.
• Prepare and maintain inspection reports.
• Program and or operate the coordinate measuring machine.
• Perform hardness testing.
• Perform small hand tool calibration.
• Collect and tabulate data for SPC use.
• Generate first article reports per AS9102.

Skills on Resume: 

• Drawing Interpretation (Hard Skills)
• Parts Inspection (Hard Skills)
• Layout Inspection (Hard Skills)
• Report Preparation (Hard Skills)
• CMM Operation (Hard Skills)
• Hardness Testing (Hard Skills)
• Tool Calibration (Hard Skills)
• Data Collection (Hard Skills)

Job Summary: 

• Be responsible for identifying quality defects and or concerns, as well as recognizing and identifying a variety of heavy-duty differentials or transmissions and their components.
• Properly recognize and identify all differential or transmission parts.
• Properly recognize, identify and use tools needed to inspect differentials or transmissions and their components.
• Properly recognize defects on the gear.
• Dispose of defective gears in the proper bin.
• Manage and maintain daily production goals.
• Identify quality concerns and address them with the team lead or facilitator.
• Be responsible for performing dimensional checks on complex machine materials and other components as received from suppliers.
• Perform first piece inspection or first article inspection of new parts and assemblies.

Skills on Resume: 

• Defect Identification (Hard Skills)
• Parts Recognition (Hard Skills)
• Tool Usage (Hard Skills)
• Gear Inspection (Hard Skills)
• Defect Disposal (Hard Skills)
• Production Management (Soft Skills)
• Dimensional Checks (Hard Skills)
• First Article (Hard Skills)

Job Summary: 

• Attend various meetings related to assigned construction projects.
• Submit detailed documentation of daily construction activities.
• Assist with the coordination of required project acceptance testing.
• Perform materials inspection and acceptance before installation.
• Point out potential problems to the contractor and project engineer.
• Keep the resident engineer and supervisor informed of the progress of the project.
• Be responsible for job-specific quality system tasks in the quality manual.
• Conduct follow-up inspections for compliance and for complaints.
• Adhere to strict regulations regarding the performance of inspections and working with minors.

Skills on Resume: 

• Meeting Participation (Soft Skills)
• Activity Documentation (Hard Skills)
• Test Coordination (Hard Skills)
• Material Inspection (Hard Skills)
• Problem Identification (Soft Skills)
• Progress Reporting (Soft Skills)
• Quality Tasks (Hard Skills)
• Follow-up Inspection (Hard Skills)

Job Summary: 

• Monitor, test and ensure conformance of client or contractor work on various projects.
• Ensure plans, specifications, materials, traffic and erosion control devices, quality assurance and safety standards.
• Perform engineering inspection activities such as construction observation and conducting field tests for concrete, asphalt and earthworks.
• Inspect state, county, municipal and township transportation infrastructures.
• Ensure all materials, procedures and safety rules comply with the latest Wisconsin Department of Transportation WisDOT standards.
• Interact and communicate effectively and diplomatically with colleagues and client representatives, particularly in difficult and stressful situations.
• Record daily construction inspection notes for CEI document management.
• Document all quality or damage issues to track the number of issues and whether they are increasing or decreasing.
• Report any increase in the same defects to the supervisor.

Skills on Resume: 

• Work Conformance (Hard Skills)
• Standards Compliance (Hard Skills)
• Field Testing (Hard Skills)
• Infrastructure Inspection (Hard Skills)
• Safety Compliance (Hard Skills)
• Effective Communication (Soft Skills)
• Inspection Documentation (Hard Skills)
• Issue Reporting (Hard Skills)

Job Summary: 

• Perform inspections for incoming, in-process and completed products or materials.
• Perform visual inspections of surface defects, finish and process-related defects.
• Perform dimensional inspection with gages including calipers, micrometer, height stand, protractors and CMM.
• Understand prints, including geometric dimensioning and tolerances and choose the correct gauge accordingly.
• Perform calibrations or verifications on inspection equipment to ensure equipment is maintained in good operating condition.
• Work with others to resolve manufacturing problems and improve quality.
• Complete non-conformance reports for any rejected material and forward them to the material review board.
• Accept or reject products, document information, reports, inspection data, test results and issue NCRs into the ERP database.
• Perform a visual inspection to the company's and customer's specifications.

Skills on Resume: 

• Product Inspection (Hard Skills)
• Defect Detection (Hard Skills)
• Dimensional Inspection (Hard Skills)
• Print Interpretation (Hard Skills)
• Equipment Calibration (Hard Skills)
• Problem Solving (Soft Skills)
• Nonconformance Reporting (Hard Skills)
• ERP Documentation (Hard Skills)

Job Summary: 

• Inspect receiving, in-process and outbound aerospace component parts, sub-assemblies and or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier or customer requirements.
• Be responsible for the review and acceptance of paperwork and documentation used in the acceptance of the product.
• Be responsible for producing necessary manual or computer-generated inspection reports to accept or reject products.
• Perform inspection using measurement equipment such as but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, surface plates and optical comparators.
• Complete data processing and move transactions.
• Evaluate and adhere to all flowed-down contractual internal and external requirements of customer purchase orders and suppliers' purchase orders for commercial and or military products.
• Inspect work of contractors in private subdivisions to ensure compliance with council standards, specifications and the approved construction plans.
• Monitor construction techniques and the construction site to ensure they are safe and in accordance with council standards and relevant state and federal government legislation and standards.
• Conduct inspections of engineering-related conditions of planning permits.
• Complete vehicle crossing, road opening and asset protection permit inspections from time to time.

Skills on Resume: 

• Component Inspection (Hard Skills)
• Document Review (Hard Skills)
• Inspection Reporting (Hard Skills)
• Measurement Equipment (Hard Skills)
• Data Processing (Hard Skills)
• Requirement Compliance (Hard Skills)
• Construction Monitoring (Hard Skills)
• Permit Inspection (Hard Skills)

Job Summary: 

• Carry out inspection activities to ensure conformance.
• Conduct site surveys, obtaining relevant information, equipment and materials.
• Search for physical survey evidence including building ties, monuments, fences and determine whether or not existing survey evidence suffices.
• Obtain additional survey evidence and determine when enough information has been obtained.
• Analyze situations or data from which answers are easily obtained using standard procedure and practice.
• Perform an inventory and a minimum of a limited visual assessment of all areas predetermined by the borough managers.
• Be proactive and alert project management professionals to issues that may come up in the field.
• Provide solutions to mitigate those problems.
• Observe field work to ensure workmanship and materials meet standards.
• Document the work via the daily inspection report and various other reports.
• Facilitate the reconditioning process by locating, starting, moving, inspecting and returning vehicles on property.
• Inspect the interior and exterior of vehicles for cleanliness and imperfections that are within or outside vehicle standards.
• Use a mobile tool to capture images of vehicle imperfections and document features.
• Receive, tag and organize recently acquired vehicles.

Skills on Resume: 

• Conformance Inspection (Hard Skills)
• Site Surveying (Hard Skills)
• Survey Evidence (Hard Skills)
• Data Analysis (Hard Skills)
• Visual Assessment (Hard Skills)
• Issue Mitigation (Soft Skills)
• Field Observation (Hard Skills)
• Vehicle Inspection (Hard Skills)

Job Summary: 

• Document dimensional and visual inspections to the drawing or applicable procedures.
• Document non-conforming material utilizing an NCR nonconforming materials process.
• Review and verify internal and external qualifications of suppliers, welders and NDE personnel about non-destructive examinations NDE, welding procedures and or other applicable requirements.
• Review and approve the supplier’s manufacturing and testing documents or procedures and take care of the approval of these documents by the customer, their customer and the authorized inspection body.
• Prepare and define test and inspection requirements for the required projects such as ITP and procurement specifications.
• Interface effectively and diplomatically with assemblers, test technicians, engineers, customers and management when resolving quality issues.
• Use work instructions, drawings or inspection instructions and checklists to visually inspect circuit card assemblies to manufacturing and industry specifications including IPC and related reference documents and standards.
• Monitor and verify quality in accordance with statistical process or other control procedures.
• Communicate effectively with assemblers, engineers and management when resolving quality issues.

Skills on Resume: 

• Dimensional Inspection (Hard Skills)
• Nonconformance Reporting (Hard Skills)
• Qualification Review (Hard Skills)
• Document Approval (Hard Skills)
• Test Requirements (Hard Skills)
• Issue Resolution (Soft Skills)
• Visual Inspection (Hard Skills)
• Quality Monitoring (Hard Skills)