Job Summary: 

• Coordinate all project MIEC activities in collaboration with the MIE contractor, the inspection department, and the MIEC lead
• Ensure compliance of MIEC activities with specifications, standards, and local legislation
• Participate in technical reviews regarding maintainability and inspectability of installations during pre-feed, feed, and detailed engineering
• Ensure follow-up of inspection engineering activities in line with the maintenance and inspection engineering contract (MIEC)
• Provide assistance to the MIE contractor work package leaders about inspection issues
• Review technical drawings and provide feedback, using the company EDMS (MANASA)
• Maintain regular communication with the project management team, EPIC engineering team, and yard or construction sites
• Manage designated contractors, ensuring compliance with HSE and inspection procedures and policies
• Follow up on the FOPS method team clarifications requests on completed MIE projects
• Assess and determine the suitability of inspection change order requests submitted by MIE subcontractors
• Manage baseline inspection activities, ensuring EPCIC and MIE contractor schedules are aligned and meet project milestones

Skills on Resume: 

• Project Coordination (Soft Skills)
• Compliance Knowledge (Hard Skills)
• Technical Reviews (Hard Skills)
• Inspection Engineering (Hard Skills)
• Drawing Review (Hard Skills)
• Communication Skills (Soft Skills)
• Contract Management (Hard Skills)
• HSE Awareness (Soft Skills)

Job Summary: 

• Be accountable for ensuring baseline inspection preparation and performance is conducted in line with the MIE contract (MIEC)
• Ensure compliance with a free culture, health and safety, and environment policy
• Support and enforce the project HSEQ management system, including charters, objectives, directives, plans, procedures, and specifications
• Promote HSEQ awareness of the workforce at all levels through a proactive attitude
• Manage site tours at the contractor yard or premises, attend HSEQ meetings, and ensure risks are identified, actions assigned, and managed within the project team and contractors
• Monitor work activities, especially areas where unsafe acts could occur, and ensure that risks have been properly identified and assessed before work execution (job safety analysis)
• Ensure that potential failures, weaknesses, and hazards are immediately reported
• Develop and contribute to the preparation of SOW for the MIEC contract and assist with CFT preparation, along with the field operations inspection engineering team
• Ensure that all inspection aspects are captured in the EPCIC contract CFT
• Review technical bids, prepare clarifications, and facilitate clarification meetings, capturing comments of bidders

Skills on Resume: 

• Inspection Management (Hard Skills)
• HSE Compliance (Hard Skills)
• Risk Assessment (Hard Skills)
• HSEQ Awareness (Soft Skills)
• Site Monitoring (Hard Skills)
• Hazard Reporting (Soft Skills)
• SOW Preparation (Hard Skills)
• Bid Evaluation (Hard Skills)

Job Summary: 

• Prepare answers to bidders' technical clarifications
• Develop an evaluation matrix and critique each bidder based on technical content and proposed personnel or organization
• Support the cost reduction initiative by providing C and P the requirements to challenge tender bids, reducing the cost of the contract
• Ensure that inspectability aspects, handling requirements, and inspection access are properly addressed during detailed engineering, construction, and commissioning phases, including participation in 3D modelling and constructability reviews
• Participate in FATs and design reviews
• Provide support for commissioning activities
• Contribute to the identification of training requirements regarding installed equipment and contribute to the arrangement of training with vendors for personnel
• Contribute to the identification of new specific inspection contracts to be used by operations for new equipment, write the scope of work (SOW), and prepare for a call for tender (CFT)
• Facilitate efficient communication and information flow with the MIEC lead, the project team, stakeholders, and the inspection department
• Attend FAT or ACT for the project or company
• Establish and maintain relationships with offshore site teams
• Ensure mobilization of additional general M and I resources

Skills on Resume: 

• Technical Clarifications (Hard Skills)
• Evaluation Matrix (Hard Skills)
• Cost Reduction (Hard Skills)
• Constructability Review (Hard Skills)
• Commissioning Support (Hard Skills)
• Training Coordination (Soft Skills)
• Contract Preparation (Hard Skills)
• Stakeholder Communication (Soft Skills)

Job Summary: 

• Plan, travel, direct, and lead an inspection team in the routine, special, and damage inspections of state and local agency bridges in accordance with the National Bridge Inspection Standards (NBIS)
• Drive a state vehicle in the course of state business
• Write bridge inspection reports in approved format, documenting inspection findings and recommending required bridge repairs and maintenance needs with estimated costs and repair priorities
• Review bridge inspection reports and related documents prepared by state or consultant inspection teams and recommend required improvements in the report documents
• Update bridge inventory data, review overload and encroachment permits, compute bridge ratings, complete bridge evaluations, and communicate with internal and external customers on bridge-related issues
• Utilize the bridge management database system, including adding inspection documents and commenting on documents assigned for review
• Attend training to comply with federal and organizational policies and procedures
• Attend professional seminars and conferences

Skills on Resume: 

• Team Leadership (Soft Skills)
• Vehicle Operation (Hard Skills)
• Report Writing (Hard Skills)
• Document Review (Hard Skills)
• Data Management (Hard Skills)
• Bridge Evaluation (Hard Skills)
• Customer Communication (Soft Skills)
• Professional Development (Soft Skills)

Job Summary: 

• Set annual inspection plans for the Texas City and Pasadena plants, with coordination of operations and maintenance at both sites
• Coordinate and support daily activities of the inspection team and the inspection data management system in support of regulatory compliance
• Develop and manage inspection test plans in accordance with equipment history, identified damage mechanisms, reliability and operability goals, and regulatory code requirements
• Develop, modify, and maintain procedures for inspection
• Review results of inspection and produce recommendations on repair methods and tools, follow up on maintenance progress and work close-out, and prepare reports to the mechanical integrity technical lead in this regard
• Lead shift in inspection approach from time-based to risk-based
• Implement programs to comply with group guidance notes (IGGN-30)
• Integrate management systems supporting inspection of all equipment (SAP, IDMS, etc.)
• Manage the inspection database and produce monthly reporting data
• Support the fixed equipment engineers with input or modification to engineering repair plans for clamps, piping, pressure vessels, and all fixed equipment at the site
• Conduct or assist in basic fitness for service assessments (level 1 and 2) with supporting calculations for the determination of remaining life based on damage mechanisms present
• Support the fixed equipment engineers with input to modify or approve pipe and equipment specifications for repairs or capital projects
• Ensure procedures used in welding and repairs meet the engineering code with specific requirements of material and condition

Skills on Resume: 

• Inspection Planning (Hard Skills)
• Team Coordination (Soft Skills)
• Test Plan Development (Hard Skills)
• Procedure Management (Hard Skills)
• Repair Recommendations (Hard Skills)
• Risk Based Inspection (Hard Skills)
• System Integration (Hard Skills)
• Fitness Assessment (Hard Skills)

Job Summary: 

• Provide the first line of technical expertise on piping, pipeline, vessel, and heat exchange systems in support of the profitable operation of the plant
• Develop and implement a mechanical integrity inspection program that supports safe, reliable, regulatory, and efficient operation
• Ensure that the inspection program is updated to reflect experience and any new requirements
• Resolve inspection findings in a way that supports plant availability whilst satisfying regulatory bodies and maintaining safety
• Explore and implement new technology solutions to enhance the cost-effective way in which the mechanical integrity of the plant is maintained
• Resolve any issues associated with piping, vessels, and heat exchange systems
• Provide the pressure systems technical review for any equipment or plant modifications in accordance with the management of change procedure
• Develop and own specific tools for the life cycle management, condition tracking of refractory systems, and inspections

Skills on Resume: 

• Technical Expertise (Hard Skills)
• Inspection Program (Hard Skills)
• Program Updating (Hard Skills)
• Issue Resolution (Soft Skills)
• Technology Implementation (Hard Skills)
• System Troubleshooting (Hard Skills)
• Technical Review (Hard Skills)
• Lifecycle Management (Hard Skills)

Job Summary: 

• Prepare and review method statements and risk assessments for site activities
• Execute structure inspections and investigations by planning, undertaking site work, and supervising subcontractors and third parties
• Review and approve findings by subcontractors
• Check and approve text for factual, interpretive, and summary reports
• Prepare repair specifications, including prioritising structures for further works
• Deliver project governance, administration, and management tasks
• Exercise independent engineering judgement and provide innovative solutions to engineering problems
• Prepare proposals and work scopes, including pricing and programming of specialist investigations

Skills on Resume: 

• Risk Assessment (Hard Skills)
• Site Inspection (Hard Skills)
• Subcontractor Management (Soft Skills)
• Report Review (Hard Skills)
• Repair Specification (Hard Skills)
• Project Management (Soft Skills)
• Engineering Judgement (Soft Skills)
• Proposal Preparation (Hard Skills)

Job Summary: 

• Oversee the risk-based inspection (RBI) program of the plant, identify gaps, and resolve them with techno-commercial solutions
• Develop a corrosion mapping regime in the plant by analysing historical data and give technical recommendations to ensure plant integrity
• Verify damage mechanisms in the RBI program and propose improvements in the inspection plan based on technically sound judgment and industrial best practices
• Investigate equipment failure and recommend cost-effective methods for repairs and material selection
• Perform a periodic inspection program to assure the mechanical integrity of static equipment, pressure vessels, heat exchangers, hydrocarbon piping, safety relief equipment or devices, gasifier feed injectors, high-pressure boiler, and related components
• Maintain an effective inspection data management system and filing system, including periodic updates
• Troubleshoot integrity problems and provide reports on preventive and corrective actions
• Conduct failure analysis, analyse inspection and reliability data, and develop an improvement plan
• Monitor latest developments in inspection, materials, and corrosion technology
• Develop and update leading indicators for the reliability of all critical piping and fixed equipment
• Recommend engineering solutions and mitigation steps for equipment degradation problems
• Carry out statutory regulation requirements in compliance with the Workplace Safety and Health Act and applicable codes of practice

Skills on Resume: 

• RBI Management (Hard Skills)
• Corrosion Mapping (Hard Skills)
• Damage Mechanisms (Hard Skills)
• Failure Investigation (Hard Skills)
• Periodic Inspection (Hard Skills)
• Data Management (Hard Skills)
• Failure Analysis (Hard Skills)
• Regulatory Compliance (Hard Skills)

Job Summary: 

• Perform risk-based inspection (RBI) assessment of mechanical static pressure equipment, including boiler plant
• Determine plant equipment and piping criticality based on RBI analysis and formulate appropriate inspection strategies compatible with plant availability demands
• Plan and establish RBI methodology and inspection database for operating plant and plant modifications
• Participate in RBI review workshops and preparations for RBI study and support the integrity team during and after RBI studies
• Initiate pre-screening RBI exercise and final implementation to reduce and optimize plant inspection plans
• Prepare an inspection program based on risk-based analysis results
• Support plant inspectors on when, where, and how to inspect, and interpretation of inspection findings to assure fitness for service of the equipment
• Implement piping inspection circuits to optimize inspection plans based on the facility's layout and RBI schedules
• Ensure all related data with RBI software is accurate, up to date, and well managed in accordance with company document inspection
• Develop and maintain an effective inspection program based on RBI analysis by focusing inspection resources on critical equipment and eliminating unnecessary inspections

Skills on Resume: 

• RBI Assessment (Hard Skills)
• Criticality Analysis (Hard Skills)
• Methodology Development (Hard Skills)
• Workshop Participation (Soft Skills)
• Inspection Program (Hard Skills)
• Inspector Support (Soft Skills)
• Data Management (Hard Skills)
• Circuit Implementation (Hard Skills)

Job Summary: 

• Perform the day-to-day work to increase refinery profit, enhance plant reliability and integrity, and promote safety and compliance with environmental standards
• Provide expert advice for static pressure equipment inspections, evaluations, repairs and modifications, and follow up on critical repair and maintenance works
• Participate in the investigation of work accidents or incidents, ensuring the effective implementation of safety policies and adequate maintenance of static pressure equipment
• Follow up on corrosion control contractors to check on quality, develop a list of activities, and enforce compliance with the agreed contract
• Provide feedback to the inspection specialist unit head regarding corrosion control, the contractor’s performance, and provide recommendations on corrective actions in case of discrepancies
• Apply knowledge of corrosion engineering principles and theories to anticipate and identify potential threats to the integrity of the static pressure equipment and ensure that proactive and preventive measures are in place
• Develop functional and design specifications (FDS) for the static pressure equipment corrosion inspection services and support the inspection section unit head in tendering and contracting-related activities
• Stay abreast with new corrosion techniques and technologies and participate in regional and international conferences and exhibitions concerning corrosion management and control activities
• Recommend process improvement initiatives to adapt and change RBI and inspection plans based on industry best practices
• Ensure that corrosion control and inspection activities and investigations are in line with the internal standards and procedures
• Participate in setting and monitoring key performance indicators (KPIs) for NDT and external inspection activities, and evaluate the performance and efficiency of RBI based on monitoring KPIs
• Apply RBI methods and principles and operate special RBI software to all static pressure equipment in the refinery to ensure accurate risk assessment results
• Prepare technical reports and corrosion analyses on static pressure equipment regularly and during turnarounds, and confer findings with the inspection specialist unit head to ensure associated risks are addressed in the RBI and proactive actions are taken
• Provide the necessary support to the respective OME team member before and after daily meetings to ensure a high level of safety performance and comply with health, safety, and environmental standards

Skills on Resume: 

• Equipment Inspection (Hard Skills)
• Accident Investigation (Hard Skills)
• Contract Compliance (Hard Skills)
• Corrosion Engineering (Hard Skills)
• Specification Development (Hard Skills)
• Process Improvement (Soft Skills)
• KPI Monitoring (Hard Skills)
• Technical Reporting (Hard Skills)

Job Summary: 

• Explore and develop new inspection capabilities to improve the shops' inspection capability and efficiency
• Develop CMM or other inspection programs for product scanning and repair development trials to support NPI development and delivery
• Set up, commission, and develop CMM or other inspection solutions to provide dimensional correlation and verification of product characteristics or new tooling designs
• Diagnose and resolve hardware and software issues
• Engage externally to maintain currency with current market inspection technologies and applications
• Qualify inspection systems for production needs
• Establish process and equipment controls to ensure inspection system accuracy and reliability
• Drive continuous improvement of inspection systems and processes in terms of accuracy, cycle time reduction, and reliability
• Develop and maintain written procedures for the inspection system
• Conduct training and certification of inspection personnel and engineers on the shop floors
• Generate and outline a project schedule to keep all stakeholders up to date promptly

Skills on Resume: 

• Inspection Development (Hard Skills)
• CMM Programming (Hard Skills)
• System Commissioning (Hard Skills)
• Issue Diagnosis (Hard Skills)
• Technology Engagement (Soft Skills)
• System Qualification (Hard Skills)
• Process Improvement (Soft Skills)
• Personnel Training (Soft Skills)

Job Summary: 

• Support planning and organisation of all work allocated, including contact with members
• Work safely, following all laid-down procedures
• Ensure that the high standards and quality of work are achieved at all times
• Complete all allocated tasks within the timescales required and maintain productivity targets
• Ensure that all documentation and reports are accurately completed
• Ensure that electronic systems and laptop information are securely protected, and that all of that information is consistently transmitted to the head office
• Actively engage with customers, providing cost-effective and practical solutions
• Attend training sessions and meetings

Skills on Resume: 

• Work Planning (Soft Skills)
• Safety Compliance (Hard Skills)
• Quality Assurance (Hard Skills)
• Time Management (Soft Skills)
• Report Documentation (Hard Skills)
• Data Security (Hard Skills)
• Customer Engagement (Soft Skills)
• Training Participation (Soft Skills)

Job Summary: 

• Lead the inspection coordination activities with third-party inspection agencies for the timely arrangement of inspectors, review of inspection and release notes, material test reports, and related documents
• Assist in the inspection and estimation of equipment for new projects
• Generate inspection reports and other inspection statistics regularly to report inspection performance
• Review the inspection reports performed by third-party inspection agencies
• Lead the NCR process and problem-solving, and drive corrective actions at suppliers with support from the engineering team
• Work closely with local engineering resources in supplier activities
• Manage the pool of leads and follow up on the same for early closure
• Inspect the customer's car and prepare the inspection report
• Estimate the repair work needed for the used car
• Handle all store operations and assist in physical inventory counts
• Cultivate successful relationships with retail customers by completing each transaction in a quick and efficient manner

Skills on Resume: 

• Inspection Coordination (Hard Skills)
• Equipment Estimation (Hard Skills)
• Report Generation (Hard Skills)
• NCR Management (Hard Skills)
• Supplier Collaboration (Soft Skills)
• Customer Inspection (Hard Skills)
• Store Operations (Hard Skills)
• Customer Relations (Soft Skills)

Job Summary: 

• Ensure cost, quality, safety and reliability standards are being met.
• Interpret plans, drawings and specifications.
• Complete risk analysis of new designs and processes.
• Complete testing and analysis on failures, proposing changes in design or formulation to improve system and or process reliability.
• Recommend design or test methods and statistical process control procedures for achieving required levels of product reliability.
• Perform research, design and development activities to improve operational effectiveness and reliability.
• Independently handle complex issues with minimal supervision, while escalating only the most complex issues to appropriate staff.
• Conducting diesel engine inspections every 18-24 months on CRF patrol boats having diesel engines with 500 horsepower or greater.
• Provide technical assistance with diesel engines, repairs, troubleshooting and material assessment of CRF patrol boat engines in accordance with OEM specifications.
• Maintaining a diesel engine inspection schedule.
• Tracking inspection results and reporting results to CRG-1, CRG-2 and CRS Maintenance Officers.
• Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Skills on Resume: 

• Quality Assurance (Hard Skills)
• Plan Interpretation (Hard Skills)
• Risk Analysis (Hard Skills)
• Failure Analysis (Hard Skills)
• Process Reliability (Hard Skills)
• Research Development (Hard Skills)
• Diesel Inspection (Hard Skills)
• Technical Assistance (Soft Skills)

Job Summary: 

• Inspect, test, repair, and maintain lifting and working at height equipment
• Load test equipment such as runway beams, davit sockets, swing jibs, and lift shaft eyes
• Install basic lifting equipment
• Produce certification for equipment, including detailed reporting on failed items
• Carry out site surveys and advise customers on the correct selection and use of lifting equipment
• Organise, progress, and complete the installation, testing, and commissioning of lifting equipment, including runway beams, swing jibs, davit sockets, powered hoists, and related components
• Record information using an ERP system for quality documentation and data tracking
• Perform inbound and outbound inspection and testing on all products
• Develop inspection strategies and new inspection techniques to meet business needs
• Interpret drawings featuring geometric dimensioning and tolerancing (GD&T) to identify product inspection requirements
• Write, edit, and assess programs utilized in manufacturing using CMM programming platforms
• Prepare detailed inspection documentation, such as written descriptions of inspection results, including deviations from engineering specifications

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Load Testing (Hard Skills)
• Equipment Installation (Hard Skills)
• Certification Reporting (Hard Skills)
• Site Surveying (Hard Skills)
• System Commissioning (Hard Skills)
• ERP Documentation (Hard Skills)
• CMM Programming (Hard Skills)