• Be responsible for inspecting electronic assemblies to ensure compliance with engineering documents, work instructions, customer specifications and industry standards.
• Verify conformance and write nonconformance reports.
• Verify that rework or repair has been completed in accordance with specified requirements.
• Report inspections and move product in the proper system.
• Stamp or sign off on inspection steps upon completion, approving and releasing the product for shipment.
• Interface with production and engineering on production and product problems.
• Assist production by providing explanations and or instructions on quality issues and production issues.
• Work closely with quality engineering and manufacturing engineering to improve the process and design for manufacturability.
• Spot audit in the production area to ensure that the proper instructions are being followed and to provide feedback to management to improve the process or system.
• Work closely with engineering on engineering builds and prototypes to point out potential production, quality and reliability problems.
• Assist management with implementing process controls, improvement activities, writing work instructions and inspection instructions.

Skills: Quality Inspection, Defect Reporting, Rework Verification, Document Compliance, Process Auditing, Production Support, Engineering Collaboration, Process Improvement

• Inspect manufactured parts at the in-process and final inspection stage utilizing various measuring devices, such as CMM, micro-calipers, gauges, magnameters, etc., per customer specifications.
• Perform visual inspections on all parts to identify any blemishes and work with the engineers in determining any non-conformances of parts and or processes.
• Interpret blueprints and IMS sheets to follow specifications of general dimensions and tolerance.
• Assist in the gathering and analysis of in-process and final inspection data.
• Perform first-article inspections.
• Design fixtures and program the trim for the parts per the customer specifications through engineered drawings using Cenit and Catia software.
• Use and interpret complicated prints, drawings and process sheets, as well as work with engineers in design and changes to fixtures.
• Utilize measuring tools to verify trim and measurements of fixture and part designs.
• Learn and adhere to required safety and housekeeping standards and practices.

Skills: Part Inspection, Visual Inspection, Blueprint Interpretation, Data Analysis, First-Article Inspection, Fixture Design, Print Interpretation, Safety Compliance

• Conduct and evaluate examinations in accordance with the provisions of certification instructions.
• Prepare the required documentation correctly for the certification decision.
• Carry out a technical review of files and decide on certification.
• Draw up the certificates.
• Ensure an impartial, independent, transparent and efficient service in the execution of the exams.
• Identify possible improvements in the quality of the services that may be implemented.
• Determine potential needs for accreditation scope extension.
• Determine the clients’ needs, requirements and develop a cost-efficient proposal.
• Visit potential customers for the mentioned schemes, prepare and negotiate the sales contracts, including business development of product certification.

Skills: Exam Evaluation, Document Preparation, Certification Review, Certificate Issuance, Service Integrity, Quality Improvement, Scope Assessment, Client Development

• Undertake workplace inspections and associated enquiries to establish employer compliance with relevant legislation and to both conduct and report on inspections.
• Participate in specialist activities and campaigns.
• Prepare submissions and files and attend Court proceedings in relation to such inspections.
• Ensure that cases are progressed in line with procedures, policies and practices.
• Ensure that the quality, consistency and timeliness of inspections are of the highest standard.
• Participate in joint investigations with other enforcement agencies (e.g., the Department of Social Protection, the Revenue Commissioners, Garda Síochána, etc.).
• Prepare and submit requests for legal and other advice.
• Record inspection details on the case management system to support inspectorate operations and facilitate management reporting and the compilation of statistics.
• Prepare reports or case reviews for management or line managers.
• Provide information to employers and employees on employment rights.
• Participate effectively as a team member in pursuit of team goals.
• Undertake such other duties as may be required from time to time to fulfil the business objectives of the division.

Skills: Workplace Inspection, Case Management, Legal Compliance, Report Preparation, Joint Investigation, Policy Adherence, Team Collaboration, Employment Guidance

• Carry out inspections in accordance with the Well-Maintained Highways Code of General Practice.
• Ensure contract compliance on data quality management issues.
• Comply with the relevant health and safety legislation.
• Communicate with the party claims team to provide evidence in the defence of third-party claims.
• Assist with the establishment and implementation of a programme of inspections and investigations.
• Record time accurately in project control systems.
• Attend court to assist with the rebuttal of claims against the highway authority.
• Liaise with the OCR and staff to ensure planning, operations and works are completed on time.

Skills: Highway Inspection, Contract Compliance, Safety Compliance, Evidence Reporting, Program Implementation, Time Management, Court Support, Operations Coordination

• Conduct initial inspections upon delivery of accepted work projects, materials and record data information for the processing of fabrication and maintenance work orders.
• Conduct in-process and inspections during the manufacturing or repair phase of the fabrication or manufacturing project, vehicle or component.
• Explain work requirements, methods, goals and procedures.
• Review work in process and conduct a final inspection upon completion of maintenance repairs or fabrication to ensure quality product output is met.
• Use and read various measurement devices i.e., calipers, micrometers, depth gauges and weld gauges to inspect all welding, fabrication and machining projects for the area of responsibility.
• Determine if a weldment meets the acceptance criteria of a specific code, standard or other documents.
• Verify that procedures being used are adequate for the effective control of quality, reject defective workmanship and materials.
• Ensure compliance with government and corporate regulations, company SOPs, directives and technical manuals to establish and maintain a quality management program.
• Coordinate with the shop supervisor when technical problems arise and in-depth mechanical knowledge is required.
• Cross-train to ensure maximum flexibility and possession of technical skills in the development and maintenance of quality programs.
• Conduct surveillances and perform other administrative duties within the quality control office.
• Ensure strict compliance with safety practices and support the safety policies and procedures.
• Instill a safety-first mentality within respective work areas and a culture that achieves low accident rates and minimal lost-time injuries.
• Adhere to ISO policies, procedures and work instructions in support of quality management.

Skills: Project Inspection, Process Inspection, Work Instruction, Final Inspection, Measurement Tools, Weld Evaluation, Quality Compliance, Safety Management

• Be responsible for daily reporting on progress quality issues per state and federal requirements.
• Document the work via the daily inspection report and various other reports, including tracking quantities and documenting force account work.
• Confirm conformance with construction drawings and specifications, contract documents, change orders, submittals, RFIs, and applicable codes and design standards.
• Verify all contractor-provided quantities per the bid item schedule to process the monthly progress payments.
• Witness and observe quality control testing activities conducted by the contractor and the special inspection firm.
• Coordinate and assist with periodic field surveys for conformance.
• Verify the contractor’s tracking and inspection of all material deliveries, storage and protection.
• Confirm all materials meet the submittal criteria and Buy America requirements.
• Monitor contractor's operations to ensure work is being performed safely.
• Identify and record new employees and visitors.
• Maintain files of approved contractors and subcontractors of any type working on the project.
• Maintain additional records or documents.

Skills: Quality Reporting, Document Control, Specification Compliance, Quantity Verification, Test Observation, Field Surveying, Material Inspection, Safety Monitoring

• Act as a safety leader and put safety first in all responsibilities, promoting an environment where each employee makes safety their priority.
• Look for defects that prevent the product from meeting customer specifications, and measure critical areas of the product for conformance to specifications.
• Prepare boxes and labels for production needs.
• Inspect and ensure that the proper number of products are contained in each package, carton and skid.
• Help the operator when performing machine set-up.
• Notify the machine operator of any variances or problems.
• Break down all packaging supplies at the end of the run.
• Keep the packaging area clean, neat and orderly.
• Know procedures and work instructions.
• Follow the policies and procedures of the company.
• Contribute to team effort, providing support with activities that help accomplish the vision to become a world-class supplier.

Skills: Safety Leadership, Defect Detection, Product Inspection, Packaging Preparation, Machine Assistance, Problem Reporting, Workplace Organization, Policy Compliance

• Plan and conduct surveillance inspections in accordance with scheduling requirements.
• Document manufacturer’s production and quality processes, review required production tests, including methods, equipment used and calibration of equipment.
• Inspect ETL listed products, subassemblies and components with respect to the certification documents.
• Review ETL label inventory and control.
• Review non-compliances issued as a result of previous inspections and document unresolved issues.
• Document compliance and non-compliance found during the inspection and advise clients on proper resolution.
• Complete and submit the follow-up service inspection report for each client inspected.
• Communicate information between facility representatives and personnel.
• Maintain expenses within given guidelines.
• Perform inspections to ensure compliance.
• Document corrective actions to assemblies.
• Issue reports to the office detailing the results of inspections.
• Keep all information confidential for each client.

Skills: Surveillance Inspection, Process Documentation, Product Inspection, Label Control, Compliance Review, Client Advising, Report Preparation, Confidentiality Management

• Make decisions about the airworthiness of aircraft, engines, components and accessories.
• Conduct inspections and related functions by job cards, maintenance manuals, ADs and other documents included or specified in the work package.
• Conduct a receiving inspection of all components, materials, tooling and hardware by this manual and applicable FARs.
• Conduct RII inspections in accordance with approved procedures and maintenance program requirements.
• Review paperwork, including but not limited to maintenance forms, parts tags, job cards, log pages and tally sheets to ensure compliance with this repair station manual and all applicable FARs.
• Inspect, determine the airworthiness of and approve the final acceptance of all incoming material, including new parts, supplies and articles on which work has been performed by contracted vendors.
• Conduct the preliminary, hidden damage, in-process and final inspection of all articles processed and record results as outlined in the repair station and quality control manuals.
• Ensure adherence to all RII inspection items and procedures.
• Perform all other duties and responsibilities of an aircraft maintenance mechanic when not performing the duties of an inspector.
• Read, understand and apply the requirements, guidelines and regulations of the repair station and quality control manuals that apply to the duties and responsibilities of an inspector.
• Read, understand and comply with the applicable regulations in the repair station and quality control manuals and with the inspection methods, techniques, practices, aids, equipment and tools used to determine the airworthiness of the article on which maintenance, preventive maintenance or alterations are being performed.
• Utilize proficiently the various types of inspection equipment and visual inspection aids appropriate for the article being inspected.

Skills: Airworthiness Evaluation, Receiving Inspection, RII Inspection, Document Review, Material Approval, Damage Inspection, Regulatory Compliance, Equipment Proficiency

• Perform inspections and preventive maintenance.
• Be certified to perform compliance inspections and or preventive maintenance of products that incorporate compliance inspections.
• Complete the schedule of monthly inspections and preventive maintenance, ensuring the schedule is completed or alternative arrangements are made.
• Understand sold work hours and perform inspections within the allowed hours without compromising safety or quality.
• Communicate exceptions to the supervisor as soon as possible.
• Perform inspection of equipment in accordance with established guidelines.
• Document findings and make corrective recommendations to the customer for inspected equipment, including a written safety summary of any observed or known safety concerns.
• Determine the customer’s intentions to purchase repairs and advise the local service office of actions necessary to sell or complete the repairs.
• Consult with the customer regarding all repair and safety-related issues and discuss recommendations that assist the customer with improving their material handling applications before leaving the job site.
• Determine items requiring quotation.

Skills: Preventive Maintenance, Compliance Inspection, Schedule Management, Safety Assurance, Equipment Inspection, Report Documentation, Customer Consultation, Repair Quotation

• Determine estimates of labor and any special tools or other requirements or hazards.
• Complete and provide a proper checklist and required forms for each service, obtaining the customer’s signature on the appropriate forms to document acceptance.
• Provide quotation and perform quick repairs required by inspection and approved by the customer.
• Document and track quotations provided to customers, either verbal or written and submit to the service office for follow-up and tracking.
• Read, understand and apply the contents of all OSHA, ANSI, CMAA, HMI and other codes or regulations about the industry.
• Refresh and update knowledge periodically.
• Maintain a copy of the inspector’s course to be available for report completion at the customer site.
• Complete inspection reports and other required and appropriate documents in a professional, accurate, neat and legible manner and submit the same promptly and in accordance with established guidelines.
• Review the job with the service manager, discussing repair issues and customer feedback received during the inspection review.
• Maintain regular communication with the service office and service supervisor in accordance with established practices.

Skills: Labor Estimation, Checklist Completion, Repair Quotation, Quotation Tracking, Regulatory Knowledge, Report Preparation, Issue Communication, Customer Feedback

• Coordinate work schedule with service supervisor.
• Perform service or repair work, and as scheduling permits.
• Maintain all company-issued equipment, vehicles and assets in a safe and proper working order.
• Operate tools, equipment and vehicles safely and responsibly.
• Notify supervisor of any deficiencies for resolution.
• Maintain supply of forms, literature, inventory and miscellaneous materials in the service vehicle.
• Document use or sale to the customer.
• Follow all established safety rules and procedures, including those established by the customer.
• Maintain company vehicle and uniforms in a clean and presentable manner.
• Participate in monthly safety meetings.

Skills: Schedule Coordination, Service Repair, Equipment Maintenance, Safe Operation, Deficiency Reporting, Inventory Management, Safety Compliance, Vehicle Upkeep

• Perform the bulk strip and detail strip inspection of gas turbines.
• Provide engine bulk strip and detailed defect reports.
• Carry out stage inspections during engine build.
• Control the workshop inspection files and supporting documentation.
• Act as the company quality assurance representative in the absence of the chief inspector.
• Work with sub-contractors and suppliers, sourcing materials for repairs and overhauls.
• Take charge of the quality assurance and quality checking processes.
• Inspect finished goods, follow through the company’s procedure and ensure adherence to product quality standards.
• Work with factory QC for continuous quality improvement.
• Complete, provide a report and keep all related documentation.
• Assure that the condition of the pipe cleanliness, coating, etc., OD and ID allows for proper inspection.
• Perform specific inspections according to written procedures.
• Assure all equipment used in performing inspections is calibrated before use.

Skills: Turbine Inspection, Defect Reporting, Stage Inspection, Document Control, Quality Assurance, Supplier Coordination, Finished Goods Inspection, Equipment Calibration

• Manage and maintain a working customer database to-do list.
• Write up all inspections on the proper electronic forms and tags provided.
• Provide a hard copy or email of any inspection reports to customers, back office, local water provider and a copy of any deficiencies found to the branch estimator, unless self-performed, then upon a customer deciding to correct possible violations.
• Submit monthly activity and result reports to the district manager.
• Complete and follow up on assigned work and take ownership of assigned projects.
• Perform incoming, in-process and final visual and dimensional inspection duties across all areas of the service shop.
• Perform functional tests on aircraft components, plate layout on incoming materials and generate release to service certifications for any components.
• Verify test setups and perform all types of parts and processes verifications using necessary inspection techniques and equipment.
• Perform inspection of soil-related construction activities, including micro piles, drilled piles, grading, compacted backfill, foundation excavations, shoring installation and testing, stone columns and soil improvement methodologies.
• Read and interpret project designs and specifications to determine what inspections.
• Clearly, completely and accurately document the inspections performed.

Skills: Database Management, Inspection Reporting, Activity Tracking, Project Ownership, Visual Inspection, Functional Testing, Soil Inspection, Specification Interpretation

• Experience in a manufacturing environment, assembly or casting.
• Experience using computers, Microsoft Office apps like Excel, Word, and web applications.
• Experience in SAP and Windchill.
• Understand and carry out oral and written instructions.
• Skilled in using tools, such as a screwdriver, crimper, and air gun.
• Good written and oral communication skills.
• Ability to work with teams and deliver feedback to operators concerning identified issues.
• Ability and willingness to climb ladders, stand/walk for long periods of time.
• Ability and willingness to read and interpret technical drawings and models.
• Initiative, teamwork, flexibility and attention to detail.

Qualifications: BS in Mechanical Engineering with 4 years of Experience

• Experience/knowledge on the NEC4 contract.
• Experience in highway works.
• Experience in structures.
• Experience/knowledge of temporary works management.
• Senior engineers or site agents with highway construction experience.
• Knowledge and understanding of QA/QC principles and their application to a project, suppliers and sub-contractors - ITPs, NCRs, MARs, RFIs.
• Thorough understanding and application of the CDM Regulations.
• Understanding of principles of engineering relating to the project scope of work.
• Understanding and application of BS 5975:2019.
• Ability to confidently read drawings, specifications and contract information.

Qualifications: BS in Civil Engineering with 10 years of Experience

• Certification of level II inspection in the Welding, LP, and MP.
• Experience in a heavy manufacturing shop environment, in a process-oriented shop and/or related industry.
• Experience measuring tools.
• Experience or training with measuring equipment, have strong computer and math skills, and mechanical aptitude.
• Working knowledge of industrial processes and traditional quality control methodologies.
• Intermediate knowledge of computer software to include, but not limited to, Microsoft Outlook, Microsoft Excel, and Microsoft Word.
• Intermediate problem-solving skills to identify and resolve problems promptly.
• Proficient in reading blueprints and schematics.
• Good organizational and planning skills to prioritize and plan work activities efficiently.
• Good interpersonal and communication skills.
• Ability to effectively interpret data and present as information and respond to questions from engineers and other technical staff.
• Ability to use various measurement devices (calipers, pin gauges, go/no-go gauges, etc) to verify mechanical part compliance.

Qualifications: BA in Criminal Justice with 7 years of Experience

• Experienced in conducting audits of product and manufacturing processes.
• Experience in a quality auditor inspector role.
• Lean manufacturing experience.
• Understand customer/agency inspection and release processes.
• Understand and demonstrate the ability to effectively facilitate Quality Systems auditing activities and processes.
• Knowledgeable of calibration equipment and processes.
• Demonstrate effective verbal and written interpersonal communications.
• Demonstrate solid documentation skills.
• Effectively use standard measurement equipment (i.e., calipers, meters).
• Effectively facilitate multiple projects and tasks at the same time.
• Excellent in a fast-paced work environment.

Qualifications: BS in Environmental Science with 5 years of Experience

• ASQ Certifications, Electronics and Mechanical systems.
• Experience in the auditing process and products.
• Experience/work history directly related to electrical inspection.
• Technical experience background (familiarity with electrical schematics, parts list, shop travelers, quality procedures, electrical test and measurement equipment).
• Proficiency in Excel, Word, and PowerPoint.
• Excellent organizational and time management skills.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
• Ability to read and interpret documents such as Customer Orders, product blueprints and wiring diagrams.
• Ability to write routine reports and correspondence.
• Ability to speak effectively to groups of customers or employees of the organization.

Qualifications: BS in Industrial Engineering with 8 years of Experience

• Certification for IPC/WHMA-A-620.
• Successful electronic assembly experience, including SMT, T/H and mechanical.
• Understanding of electrostatic discharge (ESD) controls.
• Must be able to perform in a self-directed in a fast-paced working environment.
• Excellent verbal and written communication skills.
• Demonstrates proficiency in Windows and the MS Office Suite.
• Ability to effectively operate visual magnification devices (microscopes, etc.).
• Ability to effectively operate and interpret basic electronic measuring devices.
• Ability to effectively operate and interpret basic mechanical measuring devices.
• Ability to review and interpret technical data packages for electronic assemblies.

Qualifications: BS in Construction Management with 5 years of Experience

• Experience working in a fast-paced manufacturing environment.
• Previous experience in quality inspection.
• Some experience using hand measurement tools and equipment.
• Knowledge of IATF16949 and how it affects the plant.
• Demonstrated skill for strong attention to detail, effective planning abilities, and organizational skills, and is self-directed.
• Must be willing and able to work any shift, including overtime.
• Must be able and willing to travel to other facilities.
• Proficient in mathematics, read and understand instructions.
• Demonstrated effective written and verbal communication skills with the ability to communicate across all levels of the organization.

Qualifications: BS in Quality Assurance with 4 years of Experience

• Experience working in an FAA environment.
• Experience in first article inspection reports per AS9102.
• Basic understanding of geometrical tolerancing and dimensional measurements per ASME Y14.5.
• In-depth knowledge of AQL sampling selection per internal procedures or ANSI/ASQC Z1.4 or by customers.
• In-depth knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, drawings, procedures, C of Cs, chemical and physical analysis reports, and test reports.
• In-depth knowledge of DFAR and Nadcap requirements.
• Basic knowledge of customers’ DQCR/DSQR programs and website portals.
• Ability to interpret plans, specifications, special provisions, and other contract documents.
• Ability to independently identify potential problems and propose solutions.

Qualifications: BA in Public Administration with 9 years of Experience

• Project experience in highway/roadway/utility/transit/bridge and/or rail construction.
• Experience using mobile devices, such as iPads, for reporting.
• Experience with WSDOT standard plans and specifications.
• Strong understanding of construction methods, standards, equipment, quality and safety per State and Federal requirements.
• Strong computing skills, including competency in Microsoft Office Suite, including Microsoft Excel, Word and SharePoint.
• Knowledge of English, spoken and written.
• Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to compute rate, ratio and percent and draw and interpret graphical data.
• Ability to apply common-sense understanding to complex situations and able to prepare and/or follow instructions in written, oral, or diagrammatic form.
• Ability to define problems, collect data, establish facts and draw valid conclusions.

Qualifications: BS in Occupational Health and Safety with 7 years of Experience

• Experience in inspecting roadway paving (asphalt and concrete).
• Experience in earthwork and grading inspection.
• Experience in bridgework inspection (pile driving, drilled shaft, etc.), beams, and bridge deck construction.
• Experience in roadway soil testing.
• Experience in the documentation of all construction documents and forms (such as daily reports, various testing forms) and communicating the results of the inspection and communicating with the supervisor.
• Strong attention to detail and being able to work in a team environment.
• Be able to communicate and interact effectively with other internal departments.
• Ability to read and understand plans and specifications.
• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.

Qualifications: BS in Electrical Engineering with 5 years of Experience

• Experience in bicycle manufacturing or a bike shop.
• Working experience in Quality Inspection or as a Technician.
• Experience with Quality Management systems such as ISO 9001, ISO/TS 16949, auditing experience, and certified auditor.
• Experience with line audits.
• Working knowledge of/interest in bicycle technology.
• Familiar with general inspection procedures.
• Basic knowledge in the use of Microsoft Office software, including Excel, Word, PowerPoint, and Outlook.
• Good interpersonal communication (reading, writing and oral) skills.
• Ability to travel independently throughout.
• English and Chinese speaking skills.
• Detail-oriented to successfully inspect items for appropriateness and completeness.

Qualifications: BA in Sociology with 4 years of Experience

• Electronic assembly and rework experience.
• Previous inspection experience.
• Experience as a dimensional inspector.
• Knowledge in reading and interpreting engineering drawings, specifications, and requirements.
• Working knowledge of J-STD-001 (Requirements for Soldered Electrical and Electronic Assemblies).
• Working knowledge of (Rework, Modification and Repair of Electronic Assemblies).
• Proficient in Microsoft Office and have the ability to learn different software programs.
• Basic math and computer skills.
• Ability to use measuring instruments such as calipers, micrometers, and more.
• Good communication skills, both oral and written, at all levels of an organization.
• Strong, organized and detail-oriented.

Qualifications: BS in Manufacturing Technology with 6 years of Experience

• Previous experience in a quality inspector or quality technician.
• Experience in quality control techniques and understanding of GD&T.
• Experience with ERP, as well as experience working on computers and using computer programs to aid inspection.
• Experience working in an ISO 9001 or similar environment.
• Knowledge of a wide range of inspection techniques.
• Working knowledge of health and safety.
• Hands-on inspection skills (caliper, micrometer, thread gages, etc.).
• Ability to read and interpret engineering drawings and quality control plans.
• Demonstrate a professional and flexible attitude with the ability to communicate clearly and effectively at all levels.
• Strong attention to detail and being able to work in a team environment.

Qualifications: BA in Urban Studies with 4 years of Experience

• Previous inspection experience and familiarity with AS9100 standards.
• Previous experience with geometric dimensioning and tolerancing.
• Knowledge of labeling requirements.
• Knowledge of standard concepts, practices, and procedures in the quality control inspection field.
• Good analytical and creative problem-solving skills.
• Ability to use tools and techniques to perform tests.
• Ability to read technical data and specifications.
• Proactively and clearly communicate important, comprehensive, and specific information that others need.
• Strong interest in learning the field of fire safety.
• Ability to very occasionally work outside normal business hours (evenings and weekends) and outside.
• Excellent knowledge of French, spoken and written.
• Good customer service skills.

Qualifications: BS in Fire Science with 3 years of Experience

• Work experience in an Industrial or Distribution environment or equivalent experience.
• Previous ISO Quality Systems experience.
• Previous Global Company experience.
• Experience communicating with suppliers to resolve incoming documentation and inspection discrepancies.
• Proficient in Geometric Dimensioning and Tolerancing (GD&T).
• Familiar with the interpretation of engineering drawings/specifications and manufacturing process evaluation.
• Working knowledge of and application of UL/CE/CSA/IEC/ASTN/ANSI and other relevant Global Regulatory Codes.
• Ability to read and interpret specifications and drawings.
• Strong communication skills to communicate with different departments.
• Ability to work mandatory overtime during the week.
• Flexible with a willingness to work as part of a team, whilst working to own initiative.

Qualifications: BS in Materials Science with 6 years of Experience