Job Summary: 

• Provide support to Business Development in the preparation of presentations, documentation, client deliverables, etc.
• Execute engineering scope and work plan for the electrical discipline on complex projects for Front End Engineering and Design (FEED), Engineering-Procure (EP) and Engineering-Procure-Construct (EPC), and Build-Own-Operate (BOO) type projects
• Perform sizing calculations for E&IC equipment and components used in complex industrial systems
• Preparation of I&C documents such as Specifications/Datasheets, Electrical Load Lists, Instrument Lists, I/O Lists, Control Logic and Functional Descriptions, Single Line Diagrams, Instrument Location Drawings, and P&IDs for both proposals and projects
• Develop document packages to support Request for Quotes (RFQ) and final procurement of electrical components, equipment, and systems
• Ensure BDC equipment and system designs are compliant with BDC Standards, contractual obligations, regulatory requirements, and local or national codes
• Complete I&C engineering tasks related to the development of system designs and equipment selection for proposals and projects within agreed-upon man-hour budgets and schedules
• Identify and recommend for evaluation improvement opportunities related to cost and/or schedule alternatives, options, and solutions and present clear and concise fact-based recommendations
• Support maintenance of the I&C core knowledge base for BDC products
• Adapt and configure established European designs to comply with North American market requirements
• Participate in Site Layout, 3D Model, and P&ID Reviews, as well as safety reviews (HAZID, HAZOP/ SIL) for proposals and projects
• Maintain the technical quality of I&C engineering deliverables issued for proposals and projects
• Support complex technical discussions with key stakeholders (customers, business partners, suppliers, and other departments/disciplines) to facilitate appropriate technical decisions
• Support formal studies, technical briefings, and presentations to key stakeholders (customers, business partners, suppliers, and other departments/disciplines)
• Identify issues (problems, value improvement opportunities) and help clarify areas of complexity during all phases of the engineering design work
• Understand multi-disciplinary technical issues and be able to provide innovative technical solutions to resolve these issues
• Seek ways to improve and promote quality, demonstrating accuracy and thoroughness in all work
• Adhere to BDC quality standards
• Maintain compliance with work instructions, standard practices, policies, and procedures, endorsing a safe work environment

Skills on Resume: 

• Technical Documentation (Hard Skills)
• System Design (Hard Skills)
• Equipment Sizing (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Problem Solving (Soft Skills)
• Stakeholder Communication (Soft Skills)
• Quality Assurance (Soft Skills)
• Cross-Discipline Coordination (Soft Skills)

Job Summary: 

• Perform the chained process of Control System Configuration for both the Gas Analyzer System and the fire alarm system
• Design instrumental detail in-house or supervise Design Institutes in APSF project designs, as well as review basic/detail design drawings and specs
• Inspect the control vendor factory and test equipment
• Provide coordination on technical issues among groups, including vendors and contractors, in addition to close cooperation with the electrical, process control, and piping design teams
• Conduct project proposal estimation, project execution, commissioning, and start-up, as well as support
• Understanding APCI instrument and controls engineering standard, spec and international industry instrument/ controls engineering code and local code
• Interpretation and application of the contractual requirements related to Instrumentation and Controls
• Engineering discipline, and following verbal and/or written Work Instructions issued for the position
• Develop and review P&ID engineering design and specifications for Instrumentation and controls
• Control and information systems for process and combustion operations
• Create, read, and edit logic diagrams, wiring diagrams, single lines, and P&IDs
• Perform and verify process/control design for projects including PLCs, Networks, Drives, Instrumentations, control panels, etc.

Skills on Resume: 

• Control Configuration (Hard Skills)
• Design Review (Hard Skills)
• Factory Inspection (Hard Skills)
• Technical Coordination (Soft Skills)
• Project Execution (Hard Skills)
• Standards Compliance (Hard Skills)
• Contract Interpretation (Soft Skills)
• Diagram Interpretation (Hard Skills)

Job Summary: 

• Designing the overall process control system for the operation of the entire ISOL system (operation of target and ISOL beam dump, radioactive isotope extraction and transport, mass separation, and first distribution towards physics experiments and collector station)
• Designing/selecting the instrumentation for the safe and efficient operation of the ISOL system
• Monitoring and control of the ISOL system, the RIB transport system, and the collector station
• Design safety-related interlocks and a data acquisition system
• Maintenance and fault diagnosis across systems and ownership of QMS functions
• Perform both the day-to-day routine requirements, scheduled and unscheduled planned preventative maintenance tasks
• Ensure that compressed air systems and multiple water systems are maintained as per their validated status
• Ensures that site documentation is present, up to date and adequately covers the works being undertaken
• Ensures that deviations from design are communicated to the CRE via the Lead I&C or Site Manager before implementation
• Make sure to have good communication with line management and other project teams to ensure a common understanding of site status
• Provide advanced warning of possible material issues to avoid disruption to the program
• Supply updates on general progress to the Tester in Charge or Site Manager
• Ensure the work site is kept clean and tidy at all times

Skills on Resume: 

• Control Design (Hard Skills)
• Instrumentation Selection (Hard Skills)
• System Monitoring (Hard Skills)
• Safety Interlocks (Hard Skills)
• Fault Diagnosis (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Team Communication (Soft Skills)
• Documentation Control (Soft Skills)

Job Summary: 

• Design of new measurement and control systems, including high-speed data acquisition
• Integration of IT systems including networks, data movement and storage
• Development of bespoke intranet-based web applications using ASP.NET/C#/T-SQL
• Design, development and deployment of key business systems, including software, databases and analysis
• Design, monitor and acceptance of third-party supplied systems
• Design the systems that will enable advanced automation of high-integrity functions
• Carry out high-quality requirements capture and analysis to produce detailed system specifications
• Work with a variety of stakeholders within the business to integrate multiple competing requirements
• Produce high-quality system models using Simulink
• Conduct research and development activities with external industry partners and academia
• Design, development and deployment of data acquisition systems
• Produce and test prototypic systems

Skills on Resume: 

• System Design (Hard Skills)
• IT Integration (Hard Skills)
• Software Development (Hard Skills)
• Automation Design (Hard Skills)
• Requirements Analysis (Hard Skills)
• Stakeholder Management (Soft Skills)
• System Modeling (Hard Skills)
• R&D Collaboration (Soft Skills)

Job Summary: 

• Lead and participate in the daily maintenance, management, and development of the hardware, software, and networks for all related real-time computing systems
• Direct staff in the daily maintenance, management, and development of the hardware, software, and networks for all of the facility's computing systems
• Develop the LAN and the personal computers for the operating facility, with support from the Information Technology Department
• Develop a thorough understanding of generating station principles of operation to successfully design and maintain safe and reliable automation and data collection systems, working within station schedules and budgets to meet station management goals
• Maintain existing facility computer systems (hardware, software, network, and security implementation)
• Develop new systems to accommodate changes in methodologies, procedures, and regulatory requirements
• Maintain and make modifications to existing real-time and security access control and monitoring system application software to accommodate changes in operating philosophy or new plant equipment 
• Assist in the development of new software to perform future applications and new projects
• Maintain and expand existing real-time and security access control and monitoring systems databases at a level consistent with changes, controlled to operating parameters and new projects for which the facility has control responsibility
• Maintain and develop procedures for effective real-time systems, security access control and monitoring systems, and network applications system operation, utilization, and disaster recovery and advise operating personnel of the same
• Serve as the point of contact with vendors of supported, commercially purchased software and hardware systems to report bugs, identify solutions to business issues, and perform upgrades

Skills on Resume: 

• System Maintenance (Hard Skills)
• Team Leadership (Soft Skills)
• LAN Development (Hard Skills)
• Automation Support (Hard Skills)
• System Upgrades (Hard Skills)
• Software Modification (Hard Skills)
• Database Management (Hard Skills)
• Vendor Coordination (Soft Skills)

Job Summary: 

• Effectively interface with all levels of the generation station management
• Analyze and resolve system hardware and software problems involving station instrumentation, power supply and network communications
• Use appropriate techniques to maintain the integrity and security of collected data
• Integrate, install and test these systems according to current generation station standards in a production plant environment, observing all generation station safety and work control procedures
• Revise existing programs, systems, and procedures to correct deficiencies, and conduct appropriate software and/or hardware tests after revisions to ensure the correct operation of revised systems
• Develop short-term and long-term plans for real-time and security access control and monitoring system upgrades
• Maintain and review data and reports as required by policy and regulatory requirements for compliance-related matters
• Develop tools to support application development and monitoring of systems and hardware
• Provide support for NERC and CIP compliance issues and reporting requirements
• Prepare and review technical specifications and initiate budgetary proposals for acquiring additional or replacement hardware and/or software for real-time systems, and monitoring systems, as well as personal computers and local area network equipment
• Complies with all FirstLight policies and procedures

Skills on Resume: 

• Management Interface (Soft Skills)
• Problem Solving (Hard Skills)
• Data Security (Hard Skills)
• System Integration (Hard Skills)
• Program Revision (Hard Skills)
• Upgrade Planning (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Tool Development (Hard Skills)

Job Summary: 

• Assurance of the Engineering Contractor's key work in terms of quality and compliance with the Project requirements
• Single point of contact in the BP organisation for the C&I field
• Assuring compliance with the relevant Project specifications and ETPs
• Feedback on the Project Codes and Standards BOD
• Oversight of the performance of the contractor for the subject area scope
• Recommendations to key decisions (C&I and multi-disciplinary), with ownership of all C&I-related decisions
• Ensures C&A and I&PS TAs are actively involved in the project and are consulted on technical issues
• Responsible for recommendations to the preparation of C&I procurement packages such as specifications, quality assurance, criticality ratings and performance management of the contractor who will have overall accountability for procurement for the Project
• Provide day-to-day support for operations personnel to ensure that process control systems continue to meet operational requirements efficiently and reliably
• Perform maintenance activities on process control equipment or systems
• Assist other Instrumentation and Controls Engineers with the design, review, and implementation of process control systems
• Interact with contractors and support the installation of process control equipment

Skills on Resume: 

• Quality Assurance (Hard Skills)
• Stakeholder Liaison (Soft Skills)
• Standards Compliance (Hard Skills)
• Contractor Oversight (Soft Skills)
• Decision Support (Soft Skills)
• Technical Consultation (Soft Skills)
• System Maintenance (Hard Skills)
• Installation Support (Hard Skills)

Job Summary: 

• Develop and supervise technical specifications, calculations, instrumentation datasheets, logic drawings, Systems Architectural (Control System Network) diagrams, Instrument Index and I/O List 
• Supervising and coordinating with Designers to markup drawings, wiring diagrams, and P&IDs
• Prepare cost estimates for the I&C scope of design activities and tasks for construction packages
• Participate in HAZOP hazard analysis
• Calculations and design of safety instrumented systems (SIS) systems
• Specifying and designing Industrial Networking systems using CATxx and fiber optic media
• Select and specify industrial instrumentation including pressure, manifold valves, flow, level, temperature, and analytical devices
• Design of PLC-based UL 508A control panels
• Provide technical reviews and input to capital projects delivered by 3rd party engineering companies
• Review vendor and contractor drawings and engineering work packages

Skills on Resume: 

• Spec Development (Hard Skills)
• Drawing Coordination (Soft Skills)
• Cost Estimation (Hard Skills)
• Hazard Analysis (Hard Skills)
• SIS Design (Hard Skills)
• Network Design (Hard Skills)
• Device Selection (Hard Skills)
• Project Review (Soft Skills)

Job Summary: 

• Reviews and checks design models, drawings, and design documents for code compliance, quality, accuracy, neatness, functionality, and satisfactory completion
• Reviews project documents for conformity and quality assurance to client technical standards, global practices, and drafting standards
• Apply thorough knowledge of instrumentation and control system design and engineering techniques independently
• Possesses broad knowledge of plant constructability as applied to construction methods and materials, and the economics involved
• Assists others in collecting or delivering design and engineering data at the job site or client office(s)
• Perform job walks to optimize design and constructability and to ensure installations are completed per IFC designs
• Troubleshoot operating control systems and instruments
• Deliver rapid response to equipment problems, malfunctions, and failures in the operating plant
• Consistently achieves goals, delivers quality and accurate work, and meets timelines
• Adheres to required processes and embraces opportunities for continuous improvement

Skills on Resume: 

• Design Review (Hard Skills)
• Quality Assurance (Hard Skills)
• Control Design (Hard Skills)
• Constructability Knowledge (Hard Skills)
• Field Support (Soft Skills)
• Site Inspection (Hard Skills)
• System Troubleshooting (Hard Skills)
• Process Improvement (Soft Skills)

Job Summary: 

• Work on project teams with other I&C engineers involved in the design of new upstream and midstream oil and gas facilities
• Prepare specifications for the procurement of instrumentation and control equipment and related installation services
• Participate in Process Hazard Analysis and Design Reviews
• Work directly with the client representative to ask and answer questions related to the Instrumentation and Controls design
• Checks the quality of equipment, installation material, tools and documentation
• Introduces the know-how, the procedure of equipment installation (including documentation and tools) to workers and technicians from the customer/installation contractor
• Implements the rules of accident prevention, health, labor safety and environmental protection
• Continuous supervising the quality and the progress of the installation within the scope of responsibilities (e.g, erection of cabinets, cable laying, wiring)
• Implements the installation acceptance test
• Follows up on the list of open points/punch list
• Supports the commissioning engineer during the commissioning process

Skills on Resume: 

• Team Collaboration (Soft Skills)
• Equipment Specification (Hard Skills)
• Hazard Analysis (Hard Skills)
• Client Interaction (Soft Skills)
• Material Inspection (Hard Skills)
• Installation Guidance (Soft Skills)
• Safety Compliance (Hard Skills)
• Commissioning Support (Hard Skills)

Job Summary: 

• Use equipment and materials in line with training instructions and safe systems of work
• Assess workplaces to ensure they are safe and work in line with site/company rules and requirements
• Comply with company requirements to carry out and adhere to risk assessments and safe systems of work
• Report all incidents, near misses, inadequate arrangements, or unsafe situations immediately in line with company reporting procedures
• Participate in health and safety training, briefings, toolbox talks, and conferences 
• Regular communication with management and the Planning Department
• Follow all agreed-upon processes to encourage a consistent approach to all tasks
• Strive to deliver the future of smart energy in line with the company's vision and values
• Interaction and liaison with the Planning Team
• Maintain safety standards and follow working procedures
• Control and manage stock
• Ensure the company vehicle remains roadworthy, complete vehicle checks and inform the Fleet Department of any issues

Skills on Resume: 

• Safety Compliance (Hard Skills)
• Workplace Assessment (Hard Skills)
• Risk Management (Hard Skills)
• Incident Reporting (Soft Skills)
• Safety Participation (Soft Skills)
• Team Communication (Soft Skills)
• Process Adherence (Soft Skills)
• Asset Management (Hard Skills)

Job Summary: 

• Prepare nuclear engineering documents 
• Engineering design change packages, 50.59 screen and applicability reviews
• Engineering assessments to support the pipe replacement and loading on the crane cribbing
• Review and approval of procedures, drawings, calculations, contingency plans, and training materials
• Working with outside vendors associated with the heavy-load lift project
• Preparing for the replacement of the first above-ground pipe in December
• Working in the field to support the implementation activities
• Providing engineering and design support for Capital Project process control systems, including programmable logic controllers, data historians, analyzers, instrumentation technology, firewall interfaces, variable speed control and servo-motion control
• Drawing upon significant past experiences with process control equipment and the process to make business-based decisions
• Working directly with the line crews daily and providing technical training and coaching to crews

Skills on Resume: 

• Document Preparation (Hard Skills)
• Design Review (Hard Skills)
• Engineering Assessment (Hard Skills)
• Vendor Coordination (Soft Skills)
• Field Support (Hard Skills)
• System Design (Hard Skills)
• Decision Making (Soft Skills)
• Technical Training (Soft Skills)

Job Summary: 

• Provides technical advice and works with the General Contractor and internal Engineering / external design agencies to solve design problems
• Acquire technical knowledge of the production facility design, regulatory requirements, and project status, and translate this knowledge into reports, schedules, plans and other tools to drive the project to completion
• Perform site inspections to verify mechanical, structural, welding and/or electrical work scope completed in alignment with design requirements and provide solutions for non-conforming designs
• Interface and collaborate with external stakeholders and vendors to advance the client’s project goals
• Plan, execute, and manage installation contracts that support I&C scope elements
• Interface with construction activities associated with mechanical, structural and electrical elements
• Identify and track items adverse to quality
• Work with and assist all divisions of the company to execute activities to complete the production facility and establish commercial operation
• Assisting the Field Engineering Manager in managing the General Contractor, including contractual, logistical, and technical requirements

Skills on Resume: 

• Design Support (Soft Skills)
• Project Reporting (Hard Skills)
• Site Inspection (Hard Skills)
• Stakeholder Collaboration (Soft Skills)
• Contract Management (Hard Skills)
• Construction Interface (Soft Skills)
• Quality Tracking (Hard Skills)
• Field Coordination (Soft Skills)

Job Summary: 

• Estimate and execute instrument engineering activities (Concept, Front End Engineering Development, Technical Study and Detailed Design)
• Achieve safety standards as defined in the personal performance contract
• Responsible for assessing the effectiveness of working practices and systems to continuously improve systems
• Carry out work by the company and project Health, Safety, Environmental and Quality systems
• Maintain the required technical quality of work
• Identify scope and schedule changes by the Change Control Process
• Ensure that designs comply with the relevant procedures, standards and regulations
• Ensure, as far as practically possible, that all assigned work is carried out in compliance with the agreed budget and schedule
• Keep up to date with technical developments, National and International Standards, and Legislative requirements
• Prepare estimates and schedules and assist in their review
• Maintain good communication with the Client and visit the Assets

Skills on Resume: 

• Engineering Estimation (Hard Skills)
• Safety Compliance (Hard Skills)
• System Improvement (Soft Skills)
• Quality Assurance (Hard Skills)
• Change Management (Soft Skills)
• Regulatory Compliance (Hard Skills)
• Budget Control (Hard Skills)
• Client Communication (Soft Skills)

Job Summary: 

• Accountability for schedule and technical quality of engineering tasks with client expectations, scope, budget, and schedule
• Provide on-site assistance during the design, planning, and construction of digital control system upgrades
• Provide decision-making support for all aspects of the process control, instrumentation, and automation upgrade projects
• Control panel design, including power and environmental considerations
• Performs the engineering tasks for the design of technology systems for Biopharma and Life Sciences facilities including cleanrooms, general manufacturing/process facilities and institutional
• Assists in providing specialized technical input to studies and design for staff’s specific area of expertise
• Coordinates with the project team and other disciplines as well as other design offices
• Assist in the development of conceptual design, preliminary design and final design documents which would include the development of technology schematic diagrams, technology equipment layout, cable routing, details, and the like
• Coordinates with disciplines in the preparation and development of the deliverables and ensures that those other disciplines’ inputs are incorporated
• Assists in developing studies and design procedures to facilitate high-quality, cost-effective work by the discipline team
• Works to build and maintain positive and productive working relationships both internal and external

Skills on Resume: 

• Task Accountability (Hard Skills)
• On-Site Support (Soft Skills)
• Decision Support (Soft Skills)
• Panel Design (Hard Skills)
• Facility Design (Hard Skills)
• Technical Input (Soft Skills)
• Team Coordination (Soft Skills)
• Design Development (Hard Skills)

Job Summary: 

• Responsible for the execution of engineering projects from the proposal phase to the final reporting and will interface directly with clients and vendors, representing the Company and the I&C Department
• Develop the various steps in the design of instrumentation, control, safety, F&G and telecom systems
• Prepare specifications, data sheets, layouts and list
• Review the design documentation developed by others, perform Capex, technical bid evaluations, Vendor’s follow-up up and participate in the commissioning and start-up phases
• Participate in autonomy to Hazid, Hazop, and SIL assessments as a specialist for the I&C discipline
• Plan, organize, and perform I&C engineering activities under the direction of a Senior/Lead I&C Engineer
• Assure compliance with Client, Jacobs and industry standards on their assigned project
• Develop key I&C deliverables and aid the lead I&C engineer in the preparation of scopes of work and estimates to support the project
• Perform tier reviews of project deliverables to ensure accuracy, conformance to codes, specifications, design criteria and conformance to good engineering practices
• Work collaboratively with domestic and international teams

Skills on Resume: 

• Project Execution (Hard Skills)
• System Design (Hard Skills)
• Document Preparation (Hard Skills)
• Vendor Coordination (Soft Skills)
• Safety Assessment (Hard Skills)
• Engineering Planning (Soft Skills)
• Standards Compliance (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Designs process diagrams, including the measurement and actuators
• Specifies and prepares lists of sensors, actuators, and specifies the parameters of technology limits
• Prepares block diagrams of control, design of protections, and algorithms for control of actuators
• Addresses non-standard and atypical requirements of projects from the instrumentation point of view
• Monitors the technical part of the contract for the assigned project
• Designs the mechanical and electrical connection of sensors
• Monitors and observes timelines for the handover of design documents, standards and project guidelines, including company
• Instructions and steering documents
• Participates in meetings with customers
• Supports PM in instrumentation, control and control systems
• Supports site and testing engineers during commissioning
• Provides As-Built documentation for the customer

Skills on Resume: 

• Process Design (Hard Skills)
• Device Specification (Hard Skills)
• Control Algorithms (Hard Skills)
• Custom Solutions (Soft Skills)
• Contract Monitoring (Hard Skills)
• Sensor Integration (Hard Skills)
• Documentation Management (Hard Skills)
• Customer Support (Soft Skills)

Job Summary: 

• Review drawings, design/technical specifications, and procurement packages for I&C products
• Perform engineering calculations in support of the design or analysis of products
• Compile technical documents/specifications for procurement or fabrication
• Determine critical equipment characteristics to support equipment qualification and commercial dedication, including preparation of commercial dedication instructions
• Assist in the development of equipment qualification test procedures, evaluate test results, and review final reports
• Research product history and availability
• Perform equivalency evaluations to determine changes in form/fit/function of commercial products
• Evaluate and provide feedback to vendor proposals
• Provide technical input during the proposal process (estimating)
• Develop and maintain material master data in SAP, procurement specifications, BoMs and routings in support of new product introduction
• Support supplier and/or manufacturing operations with technical issue resolution

Skills on Resume: 

• Drawing Review (Hard Skills)
• Engineering Calculations (Hard Skills)
• Document Compilation (Hard Skills)
• Equipment Qualification (Hard Skills)
• Test Evaluation (Hard Skills)
• Product Research (Hard Skills)
• Vendor Feedback (Soft Skills)
• Issue Resolution (Soft Skills)

Job Summary: 

• Focus on the safe execution of the daily preventive and corrective maintenance works
• Optimize existing workplans by O&M manuals to ensure availability and reliability targets are met and in conformance with QHSE
• Perform power stations and plants’ utility units' minor/major breakdowns, troubleshooting
• Assign the work to individual employees
• Provide schedule and feedback to the planner/scheduler to improve job plans, job timing, and coordination
• Follow the maintenance plan execution with timelines and accountabilities
• Accomplish documentation and report requirements for any maintenance activities
• Guide, supervise and support the technicians and subcontractors in the conduct of maintenance activities and tasks
• Participate, lead, or prepare root cause failure analysis
• Analyze the machine's time and report it to the Maintenance Manager

Skills on Resume: 

• Maintenance Execution (Hard Skills)
• Work Optimization (Hard Skills)
• Troubleshooting (Hard Skills)
• Task Assignment (Soft Skills)
• Schedule Coordination (Soft Skills)
• Report Preparation (Hard Skills)
• Team Supervision (Soft Skills)
• Failure Analysis (Hard Skills)

Job Summary: 

• Prepare engineering design documentation for concept, front-end and detailed design stages of assigned projects
• Prepare or manage the design of PLC, SCADA, SIS and other process automation solutions
• Manage the development, documentation, and maintenance of systems appropriate for the controls and instrumentation discipline
• Identify, assess and manage business and engineering risks, supporting a culture of Zero Harm and environmental responsibility
• Maintain productive relationships with all stakeholders to facilitate the delivery of asset management plans
• Guide operational sites in the development, delivery and cost management of maintenance and CAPEX plans, with regular reviews against plan and budget
• Provide technical support to enable site teams to deliver CAPEX projects, including project management, scope development, risk assessment and on-site execution
• Act as ‘Intelligent Customer’ for Instrumentation and Control aspects of the facility design, directing and coordinating these areas of work by RR and partners in support of the new facility design and construction
• Model at facility level the control design following Internal User Requirements, technical specs, Functional Design Spec, integrated factory acceptance test (IFAT), site acceptance test (SAT) and handover docs
• Defining the I&C functional requirements, cascading the requirements from key safety inputs to ensure safety case compliance
• Responsible for updating the I&C data package and associated documentation for HVAC and distribution systems to ISO 17873
• Design and operation of ventilation systems for nuclear installations
• Read and interpret machinery and plant drawings, electrical schematics, maintenance manuals, and parts catalogues to enable customer requirements to be met

Skills on Resume: 

• Design Documentation (Hard Skills)
• Automation Solutions (Hard Skills)
• System Management (Hard Skills)
• Risk Management (Soft Skills)
• Stakeholder Relations (Soft Skills)
• CAPEX Planning (Hard Skills)
• Technical Support (Soft Skills)
• Facility Modeling (Hard Skills)