• Execute the role in a safe and secure manner
• Deliver high-quality C&I engineering tasks on time, to quality, budget and client satisfaction
• Provide technical oversight and acceptance of the I&C systems throughout all phases of the development lifecycle (specification of requirements, design, manufacture, validation and commissioning), delivered to the site
• Produce and review safety case documentation
• Provide oversight of verification and validation activities
• Prepare Instrumentation and Controls deliverables for different design phases based on P&ID specifications, standards, codes, and customer input
• Work directly with lead engineers to develop technical strategy and deliverables for Biotech and Pharmaceutical client projects
• Coordinate and interact effectively with project managers, vendors, and engineers across multiple disciplines such as Process Engineering, MEP, etc
• Identify deliverables, define requirements, create design documents and contribute to design reports
• Develop technical controls, specifications/strategies and network architecture design
• Produce deliverables such as instrument datasheets, instrument indexes, wiring schematics, I/O diagrams, control panel design and scopes of work

Skills: Safety Compliance, Control Design, System Validation, Safety Documentation, Technical Strategy, Design Coordination, Network Architecture, Panel Design

• Develops the scope for work for design by collaborating with the Client and other disciplines
• Develops and completes designs using drafting resources or self-performing CAD work
• Includes safety in design development and scopes of work development
• Follows and adheres to the change control process for design scope
• Assists in the development of design packages and completion schedules
• Keeps management informed of risks to completing designs per schedule
• Monitors and maintains design key indicators for design progress and design quality
• Owns the development of a forecast of labor hours to complete designs and manages designs to budget
• Assists in the development of construction cost estimates
• Assists in the development of the construction scope of work and RFP documents
• Assists in the evaluation of bids and proposals
• Answers RFIs and reviews submittals promptly and escalates contract risks
• Completes design redlines from RFIs and design changes
• Maintains continuous improvement with skills and keeps current with codes and technologies

Skills: Scope Development, CAD Drafting, Safety Integration, Change Control, Design Scheduling, Risk Reporting, Cost Estimation, Bid Evaluation

• Analysis of control logic, detection of malfunction and elaboration of mitigation measures
• Executing simulations in compliance with established procedures
• Support the efforts to reduce maintenance costs by the efficient use of consumables, parts and tools
• Support the I&C Lead in Cyber Security topics
• Execute different projects related to I&C
• Lead project integration activities (set architecture, perform and coordinate the programming, configuration and testing of vision systems, PLC systems, HMI, SCADA and Batch and the historian and Reports applications)
• Attend the design of control panels, selection of instrumentation and configuration of networking equipment
• Realize the successful completion of projects by taking ownership of deliverables and using technical and project management skills
• Lead the authorship of technical design documentation such as facility conceptual design documents, User Requirement Specification, Functional Requirement Specification and Detailed Design documents
• Provide essential guidance in control panel design, instrumentation selection, and network equipment specification and configuration
• Provide training on the developed control systems and procedures for operations and maintenance
• Effectively implement the Quality System ISO 9001 through corporate policies, procedures and instructions
• Provide technical mentorship to other team members

Skills: Control Analysis, Simulation Execution, Cost Reduction, Cyber Support, Project Integration, Panel Design, Technical Documentation, Team Mentorship

• Plans, organizes, and performs complex assignments in a team environment under the direction of a Senior I&C Engineer
• Independently verify and validate engineering calculations
• Develop and maintain SMR standards and Conduct of Engineering methods
• Perform and support systems engineering and integration activities
• Plan, organize, and perform complex assignments in a team environment
• Support and manage the procurement of services and equipment
• Prepare and deliver technical presentations to internal and external organizations
• Prepare internal work authorizations (scope, resource estimate and schedule)
• Interface with and receive input from lead subcontractors and colleagues, including subject matter experts

Skills: Task Planning, Calculation Verification, Standards Development, System Integration, Equipment Procurement, Technical Presentation, Scope Preparation, Subcontractor Coordination

• Lead/manage instrumentation project teams of engineers and designers
• Specify and check other engineers' work in all types of instruments, process control, cause and effect matrix, SIS systems, instrument index and insulation details
• Assist process engineering is the development of P&IDs
• Being capable of conceptual, FEED and detailed engineering in all aspects of instrumentation and controls engineering
• Responsible for the development of the instrumentation engineering schedule, development of resource plans
• Develop instrument engineering estimates and adhere to assigned project budgets
• Accountable for the schedule and technical quality of challenging engineering tasks, as well as gaining familiarity with the client's expectations, scope, budget, and schedule
• Provide on-site assistance during startup, coordinate work activities with other staff members and the discipline lead
• Produce designs for electrical circuits and panels utilizing control applications
• Designs for control systems for a variety of processes
• Develop options and optimizations for all aspects of the process control, instrumentation, and automation

Skills: Team Leadership, Work Review, P&ID Support, Engineering Design, Schedule Development, Budget Estimation, Startup Support, Control Design

• Design of Digital I&C Systems - PLC, DCS, Touchscreen displays, network switches and control systems
• Process instrumentation design, specification and procurement oversight
• Attend client meetings and perform site walkdowns to ensure the client is satisfied with the work product
• Guide as a mentor in the development of less experienced nuclear instrumentation and controls design engineers
• Develops troubleshooting plans and failure mode analysis documents to support design reviews
• Assists Operations and Simulator teams in resolving I&C design issues
• Assists Project management leadership in developing detailed schedules and resolving planning issues for I&C design activities
• Develops Operability Determinations and Functionality Assessments on plant systems/components
• Assists Plant Procedure group with procedure reviews, developing/ reviewing procedures and resolving procedure issues
• Uses existing procedures to investigate, evaluate and assist in producing technically correct and cost-effective design changes or recommendations that solve ongoing problems
• Directly interfaces with other workgroups (e.g., System Engineering, Operations, Maintenance, Radiation Protection, Simulators),
• Builds relationships that will facilitate knowledge transfer, cross-functional knowledge of related work groups, and the ability to present work products effectively
• Gathers and correlates basic engineering data using well-defined engineering procedures, which may include routine and diagnostic testing of components and systems, and engineering studies to support plant troubleshooting
• Assists in a variety of topics including developing innovative procedures, improved design recommendations or new or better equipment purchase recommendations
• Prepare and review design change packages and design calculations (e.g., load flow, short circuit, protective device coordination, etc.) by company policies and procedures

Skills: Digital Design, Instrumentation Spec, Client Support, Team Mentorship, Fault Analysis, Schedule Planning, Procedure Support, Design Review

• Delivery of C&I capital expenditure programs
• Monitoring and inspecting project activities to ensure delivery to programme, budget, scope, and quality requirements
• Monitor contractor performance to ensure all construction activities are completed in line with Health, Safety and Environmental requirements
• Examining the feasibility of projects in conjunction with Asset Management, as part of the project appraisal procedure
• Liaise with Capital Programmes at the pre-construction stage, providing input to the Design review process, undertaking constructability and gate budget reviews
• Participate in the tendering processes and tender document preparation
• Contributing to the support and operation of the SCADA/DCS systems
• Liaise with Consultants and Third Parties
• Responsible for technical engineering design for electrical aspects of Water/Wastewater projects
• Serves as the Project Manager for E/IC water/wastewater projects
• Responsible for performing field services for E/IC observation and inspection
• Works with department civil engineers to develop specific electrical control, instrumentation, data gathering, and analysis for water/wastewater projects
• Performs other support functions delegated by the Construction Field Service and Engineering Design Department Managers

Skills: Project Delivery, Site Monitoring, Safety Compliance, Feasibility Analysis, Design Input, Tender Preparation, SCADA Support, Field Inspection

• Design and Plan Systems and Buildings
• Collaborate with core team and site IT, EHS, and Facility OPS teams to develop semiconductor Facility control system designs, from the basis of design to issues for construction for project buildouts and major infrastructure upgrades
• Integrate and design SCADA, network infrastructure systems ranging from Electrical, Mechanical, Water, Gas and Chemical systems
• Review documents of P&ID and SOO with related owners of Electrical, Mechanical, Water, Gas and Chemical systems to ensure system safety and stability
• Coordinate with the related department owner and consultant for the security and parking system design
• Manage all I&C issues during concept design, detailed design, procurement, bidding, manufacturing, delivery, and installation on site
• Ensure designs comply with all applicable standards, codes and regulations
• Develop, own, and maintain Global System Standards, Specifications, and Best Known Methods (BKM) standards for system discipline
• Review of the capacity planning databases (with base build capacities, assignments and actual field conditions) across the network and validating Utilization and diversity factor assumptions
• Provide system design for safe, reliable and efficient operations and maintenance
• Provide and prepare all types of documents, including statement of work (SOW), total cost of ownership (TCO) analysis, concept designs, drawing markup, budget, schedule, factory test and acceptance documents, final startup/commissioning reports 
• Review and acceptance of as-builts and submittals
• Implement Power SCADA and FMCS requirements in the installation and test plans of the Contractor for the detailed planning and construction phase until final takeover is completed
• Ensure the project construction and safety management plan are fully implemented
• Ensure Quality Assurance and Control (QAQC) of project deliverables
• Ensure that completed construction works are in proper condition and meet the requirements of specifications and function
• Perform systems testing and Commissioning by requirements of the Construction document and guard the Owner against defects and deficiencies in the works

Skills: System Design, SCADA Integration, Document Review, Security Coordination, I&C Management, Standards Compliance, Capacity Planning, Commissioning Testing

• Provide electrical process controls engineering and data integration services, including developing project scope, planning, procuring, and managing engineering projects
• Work with all levels of Plant personnel to identify and assess equipment and process problems and define requirements to help address engineering problems and needs
• Manage engineering projects from conception to completion
• Provide a wide variety of engineering and data integration services from project specification through design, implementation, training and support
• Maintains proper controls documentation including cause and effect diagrams, controls narratives, and network drawings
• Supports a wide range of communications protocols, networks, and radio telemetry including Ethernet I/O, Device Level Rings, Ethernet Radios, Serial Radios, Modbus and OPC
• Assists with establishing Key Processing “Best Practices” to improve profitability, including operating conditions, hardware change recommendations, monitoring process conditions, and unit performance reporting/comparison (benchmarking)
• Direct and coordinate the work performed in the department by engineering consultants and contractors
• Direct and coordinate the work performed by operating employees for new equipment installations or testing to ensure conformity to engineering design and specifications

Skills: Process Controls, Problem Solving, Project Management, Data Integration, Documentation Support, Network Protocols, Process Optimization, Team Coordination

• Cover a wide range of project scopes from rehabilitation of existing systems to new generating stations
• Review project technical specification, identify relevant and applicable sections, select and prepare equipment and component specifications for instrumentation, control, and protection system design and panel fabrication
• Prepare key engineering documents such as schematics and drawings for the assembly
• Install instrumentation and control panels, marshalling cabinets and junction boxes, instrument lists, cable lists, parts bills and bill of material (BOM) about project technical specifications and applicable codes
• Prepare technical specifications and support the purchasing process by participating in the selection, negotiations and technical discussions with suppliers and subcontractors
• Prepare and document test procedures and system validations and participate in factory and site acceptance tests
• Review and apply his/her engineer's seal to technical documentation produced under his/her supervision
• Coordinate with the mechanical engineering teams for generator, turbine, piping and water gate systems and the customer for the integration of instruments with their applicable equipment
• Define cable pathways including embedded conduits and blockouts in walls
• Support the installation and commissioning of hydroelectric generators and related electrical equipment at the work site from the engineering office
• Provide technical support to the sales team in preparing technical documentation and drawings for bids
• Participate in program initiatives aimed at reducing direct and indirect design costs and process streamlining to improve efficiency

Skills: Project Scoping, Specification Review, Document Preparation, Panel Installation, Supplier Coordination, System Validation, Team Collaboration, Cost Reduction

• Experience leading I&C design and estimation for the programming phase of projects
• Experience with Rockwell Automation hardware and software
• Experience with Mechanical, Electrical and Process (MEP) systems and working with MEP engineers and technicians
• Experience with multi-disciplinary large capital projects involving Owners, General Contractors, Contractors, and System Integrators
• Good Understanding of Design/Build (Engineering and Construction)
• Good understanding of complex process systems architecture and design, Instrumentation, Device Selection, Networking, PLC and I/O architectures, P&IDs, data sheets, and SCADA
• Working knowledge of environments common in large industrial applications such as Dry/Wet Mechanical, AWN, Gas/Chem Distribution, HVAC, and Clean Room environmental control
• Proficient with written and verbal technical communication including generating reports and conducting group presentations
• Proficiency with Microsoft Office Suite including Word, Outlook, and Excel

Qualifications: BS in Instrumentation Engineering with 5 years of Experience

• Previous professional experience in a consultancy environment for I&C in the oil and gas industry (onshore/offshore)
• Working knowledge of the most common International Standards for I&C
• Proficiency in PC use (MS Office) and in the use of the most common commercial software tools for instrumentation (Instrucalc, Smartplant SPI)
• Good knowledge of programming languages (i.e, C#, C++)
• Good knowledge of both spoken and written technical English
• Capable of working in a multi-disciplinary team dedicated to complex projects
• Good communication and interpersonal skills
• Fluent in P&ID Development, Systems Integration and PLC Code Writing
• Familiarity working in microelectronics, clean room design, process system design, advanced technology, micro contamination, etc.
• Experience in the building design and construction industry

Qualifications: BS in Electrical Engineering with 6 years of Experience

• Experience working with Instrumentation and Control
• Working knowledge of PLC, DCS, and other control applications 
• Strong analytical and problem-solving skills
• Ability to collaborate and work effectively in a variety of teams, including multi-disciplinary teams
• Passion for buildings and construction
• Demonstrated ability to work as a team member within an engineering organization
• Strong communication and multi-tasking skills
• Ability to quickly learn the use of Graver’s CAD software
• Proficiency with CAD software
• Proficiency in PLC and HMI programming packages
• Proficiency with the MS Office Suite

Qualifications: BS in Automation Engineering with 7 years of Experience

• Experience in electrical and electronic construction, repair, and maintenance in the water or wastewater treatment industry, hydroelectric plant, power plant or similar facilities
• Knowledge and experience in programming of PLC, HMI, OI, and SCADA software packages
• Ability to read, use and update electrical, electronic piping, and instrument drawings and schematics
• Knowledge of Microsoft operating systems and domain networking, TCP/IP network systems, and Microsoft Office applications
• Knowledge of computerized instrumentation systems, transformers, switches, control panels, and electronic components of telemetry systems and components
• Knowledge of safety practices and procedures relating to electrical controls and equipment
• Experience updating datasheets and instrument index, completing instrument indexes and datasheets, reviewing and commenting on vendor-engineered packages, etc.
• Knowledge ISA standard
• Working experience in Bentley COMOS or SmartPlant 
• Ability to effectively communicate, both verbally and in writing

Qualifications: BS in Applied Physics with 5 years of Experience

• Experience in instrumentation and controls
• Demonstrated hands-on field experience with control loops and control panel wiring
• Possesses solid interpersonal skills for working in a team environment
• Strong oral and written communication skills
• Ability to convey project I&C needs to the project managers and clients and to formulate those needs into comprehensive plans and specifications
• Advanced knowledge of standard desktop software, including Microsoft Word, Excel, PowerPoint, and Access, Adobe PDF tools
• Working experience in CAD, such as AutoCAD or Bentley MicroStation
• Ability to mentor junior staff and work with disparate project team members
• Experience in one or more areas of construction or project management (e.g., work execution, work planning, managing contracts, field engineering, etc.)
• Experience as a field engineer in any one of the focused disciplines including I&C, may be substituted instead of the education requirement
• Ability to work in a team environment and to take directions as well as think independently
• Ability to read, analyze, and interpret construction drawings, specifications, procedures, and government regulations
• Must have excellent organisational skills
• Ability to respond and act promptly on all tasks delivered

Qualifications: BS in Control Systems Engineering with 8 years of Experience

• Experience in an institutional or industrial facility with emphasis on industrial control systems, programming, SCADA systems and process automation
• Functional computer and networking skills
• Programming experience in ladder logic, Python, C++, Matlab, or similar languages
• Electronics troubleshooting skills and familiarity with diagnostic tools
• Ability to define unprecedented problems, collect data, establish facts, and draw valid conclusions by extending accepted methods or developing new ones
• Ability to interpret a wide variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables
• Ability to develop program work plans designed to improve or expand current service levels
• Good knowledge of the following tools: Simatic S7, TIA Portal, PCS7, HMI systems (WinCC), Sicam 1703, HMI System ZENON
• Working proficiency in the German and English languages

Qualifications: BS in Electronics and Communication Engineering with 6 years of Experience

• Proven working experience in designing and/or operating an industrial processing facility (e.g., chemical processing plant, oil refinery, manufacturing automation plant)
• Experience in programming PLCs (Allen Bradly, GE Fanuc/Emerson, Siemens, etc.), working with servo motors, robotics arms, and designing controls for pneumatic and motor-driven conveyor systems
• Experience in programming HMI/Supervisory control and data acquisition applications for communications to PLCs and Distributed Control Systems and familiarity with ANSI/ISA99 standards
• Working knowledge of Industrial Control Systems, Cybersecurity and associated standards NIST(SP) 800-82 and IEC62443
• Working knowledge of Virtualization Platforms such as VMware
• Working knowledge of designing electrical systems in explosive/hazardous environments (fluids and dust) including knowledge of NFPA, IECEx and ATEX Code requirements
• Proficient in Microsoft Office Suite applications
• Work experience in instrumentation and controls applications
• Working knowledge of AutoCAD and MS Office applications
• Understanding of NEC/ISA standards
• Experience with selecting field instrumentation for process control, fire/gas detection, and control system architecture
• Strong communication and interpersonal skills

Qualifications: BS in Process Engineering with 7 years of Experience

• Experience in electrical schematic and panel layout design using CAD (AutoCAD Electrical)
• Proven understanding of integrating instrumentation with data acquisition hardware
• Proficiency with electrical diagnostic equipment
• Familiar with industrial sensors and actuators such as pressure, temperature, LVDT, accelerometers, motor controllers, flow meters, relays, strain gauges, valves, and pumps
• Strong technical and non-technical writing and verbal skills
• Experience within the aerospace industry working at test facilities, with cryogenic fluid systems, specifically LH2, LOx, LNG, and LN2
• Understanding of network configuration and other IT fundamentals
• Familiarity with NI hardware or Bustec hardware
• Familiarity with calibration principles (uncertainty calculation, total error ratios, etc.) and industry calibration standards (ISO/IEC 17025, ANSI NCSL Z540.3)
• Proficient in noise reduction, shielding, grounding techniques, termination and analog and digital filtering to provide high fidelity measurements
• Ability to specify instrumentation wiring for various interfacing of data systems and sensors
• Experience crafting and installing instrumentation and control systems in hazardous areas (NFPA 70 Section 500 installations), Class 1, Division 1 and Division 2 environments
• Understanding of computers and programming languages (LabVIEW, Java, HTML, and/or C++, Python)

Qualifications: BS in Computer Systems Engineering with 9 years of Experience

• Experience in Industrial or Semiconductor engineering projects
• Demonstrated understanding of engineering documentation, Piping and Instrumentation Diagrams and standard operating procedures
• Familiar with National and local Codes, Standards, and Guidelines applicable to Semiconductor Manufacturing Facilities (ex, SEMI, NFPA, NEC, OSHA)
• Experience with equipment selection and sizing (ex, instrumentation, conductors, conduits, motors)
• Working knowledge of PLC designs and programming, Advanced Process Controls (APC), Distributed Control Systems (DCS) and Supervisory control and data acquisition (SCADA)
• Experience with engineering programs such as AutoCAD, Revit, Solidworks, EasyPower, and Rockwell Control Logix PLC products, GE Cimplicity
• Experience in leading engineering initiatives
• Extensive knowledge of PLC Programming, BMS Architecture, Reliability Engineering, Instrument Calibration
• Interpersonal skills with a strong client focus
• Excellent written and oral communication skills
• Must have strong analytical skills
• Familiarity with FMEA, RCA, Statistical Process Controls, MSA, etc.

Qualifications: BS in Electrical Power Engineering with 8 years of Experience

• Strong interpersonal skills with the ability to interface with diverse work groups
• Able to prepare technical specs and data sheets
• Able to assist in coordinating and checking subcontracted automation/telecom systems
• Able to prepare block diagrams, interconnection diagrams, and termination diagrams
• Able to prepare layouts for instrument/telecom systems
• Good knowledge of Naval Architecture 
• Proficient in the MS Office suite, AutoCAD and structural analysis software applications
• Good analytical and problem-solving skills
• Possesses good interpersonal and communication skills
• Able to multitask and able to work in a fast-paced environment

Qualifications: BS in Manufacturing Engineering with 5 years of Experience