Job Summary: 

• Follow the inspection plan documents to verify acceptance or rejection of parts and materials
• Interpret documents and drawings per ASME Y14.5 for inspection requirements
• Use touch probes and visual CMMs and other mechanical inspection tools to measure machined and plated parts with complex geometries and fine tolerances
• Perform first article inspection on machined and plated parts per AS9102
• Evaluate test or analysis data against specifications to determine acceptance
• Interpret workmanship standards and identify visual defects and anomalies
• Perform various types of data entry as part of product acceptance completion or job tracking
• Maintain accurate and detailed inspection records
• Communicate effectively with supervision and internal customers in person, on the phone, and through email
• Proactively address and resolve issues

Skills on Resume: 

• Inspection Plan Adherence (Hard Skills)
• Drawing Interpretation (Hard Skills)
• CMM Operation (Hard Skills)
• First Article Inspection (Hard Skills)
• Data Evaluation (Hard Skills)
• Defect Identification (Hard Skills)
• Record Keeping (Hard Skills)
• Effective Communication (Soft Skills)

Job Summary: 

• Follow all machine standard operator procedures
• Follow all quality procedures and perform all required quality checks
• Follow all department and machine safety rules and procedures
• Keep the work area clean by assisting with sweeping the cell
• Keep scrap and recycling down to a minimum
• Complete all necessary paperwork, including runtime and production output
• Make minor mechanical adjustments to machines
• Follow all procedures for machine cleaning to maintain machine cleanliness

Skills on Resume: 

• Procedure Compliance (Hard Skills)
• Quality Checks (Hard Skills)
• Safety Awareness (Soft Skills)
• Workplace Cleanliness (Soft Skills)
• Waste Reduction (Hard Skills)
• Paperwork Completion (Hard Skills)
• Machine Adjustment (Hard Skills)
• Machine Cleaning (Hard Skills)

Job Summary: 

• Perform inspections on complex setups using mathematical computations and drawing interpretations to ensure dimensional requirements are met
• Be knowledgeable in GD&T
• Perform the first articles to the AS9102 standard
• Perform mechanical inspections using height gage, calipers, pins, protractors, and micrometers
• Perform duties of shipping clerk with responsibilities of packaging in accordance with ASTM D 3951 or customer documentation
• Produce a packing slip and bill of lading through the ERP system
• Receive and inspect raw materials and parts from suppliers in accordance with receiving documentation
• Review documentation per requirements and procedures to ensure the completeness of work and that information is conveyed without additional interpretation to produce the highest quality product possible
• Perform a mechanical inspection on hardware
• Be responsible for complete dimensional inspection of program-specific jobs using standard measuring equipment
• Interface within the department, with other departments, and shifts to keep communication lines open and to provide information and status
• Display broad knowledge and use of inspection techniques, procedures, and gaging to provide a continuing improvement of the quality and productivity of the inspection effort
• Perform all functions in accordance with ISO 9001:2015 and AS9100 specifications

Skills on Resume: 

• Setup Inspection (Hard Skills)
• GD&T Knowledge (Hard Skills)
• First Article (Hard Skills)
• Mechanical Inspection (Hard Skills)
• Packaging Compliance (Hard Skills)
• ERP Documentation (Hard Skills)
• Material Receiving (Hard Skills)
• Cross Communication (Soft Skills)

Job Summary: 

• Read basic blueprints and use shop math (trigonometry)
• Inspect first off the parts from the manufacturing work centers
• Collect measurement data for use in First Article Inspection (FAI) reports
• Collect and provide data required for the critical part of the Final Inspection Reports (FIRs)
• Complete the customer-required part to print data forms and send them with the parts
• Perform roving in-process inspection of parts being run in manufacturing
• Inspect in-house and outsourced in-process production run parts
• Review routers to ensure that upstream operations have been completed and signed off
• Complete Discrepant Material Report (DMR) forms for rejected parts
• Inspect incoming purchased parts for compliance with specifications
• Inspect outgoing material for packaging and conformance to requirements
• Perform surface plate and comparator setups
• Fill out and file required reports, logs, databases, forms, and documents

Skills on Resume: 

• Blueprint Reading (Hard Skills)
• Part Inspection (Hard Skills)
• Data Collection (Hard Skills)
• Report Preparation (Hard Skills)
• Process Inspection (Hard Skills)
• Material Review (Hard Skills)
• Packaging Inspection (Hard Skills)
• Documentation Accuracy (Soft Skills)

Job Summary: 

• Comply with all HSE and quality procedures and policies
• Inspect parts, assemblies, subassemblies, and test reports or certifications against drawings and specifications
• Distribute all quality records and documents
• Use mechanical inspection tools (calipers, micrometers, thread gauges, Go/No-Go functional gauges, precision pin and ring gauges, scales, tapes, straight edges, inspection setup, etc.) along with advanced inspection equipment
• Understand mechanical assemblies and gauging
• Review test data supplied by outside vendors and internal inspections
• Read, understand, interpret, and apply mechanical assembly drawings
• Initiate non-conformance reports (NCR) on all nonconforming parts and assemblies
• Ensure that parts meet quality control procedures, engineering specifications, and customer requirements
• Initiate corrective action requests (CAR) when conditions adverse to quality are repetitive in nature
• Perform specialized testing (Helium Leak Test, XRF, etc.)
• Identify continuous improvement opportunities and lead initiatives to implement improvements
• Participate in quality system and process audits
• Maintain and ensure proper calibration of inspection, measuring, and test equipment

Skills on Resume: 

• HSE Compliance (Soft Skills)
• Parts Inspection (Hard Skills)
• Record Distribution (Hard Skills)
• Tool Proficiency (Hard Skills)
• Assembly Interpretation (Hard Skills)
• Data Review (Hard Skills)
• Nonconformance Reporting (Hard Skills)
• Process Improvement (Soft Skills)

Job Summary: 

• Prepare daily construction logs that document site activities
• Coordinate and prepare RFIs, RFQs, COs, CDs, SIs, shop drawings, etc.
• Coordinate shop drawings with office disciplines
• Prepare monthly payment certificates
• Chair meetings and prepare minutes
• Coordinate specialized testing during construction
• Communicate with the project team (client, contractor) via email and in person
• Conduct commissioning of processes and equipment

Skills on Resume: 

• Construction Logging (Hard Skills)
• Document Coordination (Hard Skills)
• Drawing Coordination (Hard Skills)
• Payment Certification (Hard Skills)
• Meeting Management (Soft Skills)
• Testing Coordination (Hard Skills)
• Project Communication (Soft Skills)
• Process Commissioning (Hard Skills)

Job Summary: 

• Perform incoming inspection on a variety of mechanical, electrical, and electro-mechanical parts, including printed circuit assemblies, cable and harness assemblies, and commercial parts (COTS)
• Select proper tooling such as calipers, micrometers, height gages, etc. and apply various inspection measurement techniques to specified features, dimensions, and tolerances
• Interpret and evaluate parts against engineering documents, Solid Works models, mechanical fabrication drawings, Bills of Materials (BOM), component specifications, inspection checklists, and Engineering Change Orders (ECO)
• Perform incoming inspections in various locations in the factory
• Document the acceptability conditions of incoming materials and processes using the ERP database
• Document all nonconforming conditions clearly within the ERP database to allow subsequent processing of the disposition and Material Review Board activities
• Move materials using standard material handling equipment
• Uphold core values of integrity, innovation, accountability, and teamwork

Skills on Resume: 

• Incoming Inspection (Hard Skills)
• Tool Selection (Hard Skills)
• Document Interpretation (Hard Skills)
• Factory Inspection (Hard Skills)
• ERP Documentation (Hard Skills)
• Nonconformance Reporting (Hard Skills)
• Material Handling (Hard Skills)
• Core Values (Soft Skills)

Job Summary: 

• Review oil storage and transfer systems (diesel fuel oil, lube or motor oil, gasoline, etc.), granular transfer systems (gravity and pneumatic), wastewater treatment and transfer systems (OWS units, grit chambers, DAF units, etc.), and stormwater drainage and transfer systems (lift stations, drains, outfalls, etc.)
• Assist project engineers in the application of principles, methods, and techniques of mechanical and process engineering technology
• Study and analyze the mentioned systems and equipment by regularly conducting site visits, surveys, and inspections, and assist with data collection, compilation, and assessment for infrastructure projects
• Oversee civil and mechanical repairs and construction
• Communicate with the project manager and engineers regularly, reporting the progress of work and the status of each phase of the project
• Assist with project documentation that is processed promptly and is retrievable
• Maintain an organized and complete set of records and procedures for the project
• Identify and report occurrences of construction work that do not meet the specific requirements of the contractor and the recommendations to the extent authorized by policy
• Pick up samples for laboratory work and transport them to the appropriate lab
• Produce quality outputs efficiently while meeting budget and schedules on multiple concurrent projects
• Establish and maintain effective working relationships with other employees, clients, and public agencies
• Process all documents and work logs promptly, including weekly statements of working days, submittals for review, information requests, change orders, payments, payment estimates, and project contingency balances

Skills on Resume: 

• System Review (Hard Skills)
• Engineering Support (Hard Skills)
• Site Inspection (Hard Skills)
• Repair Oversight (Hard Skills)
• Progress Reporting (Soft Skills)
• Project Documentation (Hard Skills)
• Nonconformance Identification (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Review construction safety plans and activity hazard analysis
• Conduct construction site safety inspections
• Review and approve the Design-Build Quality Management Plan
• Review and approve all quality document submittals
• Review engineering plans and specifications for compliance with design criteria and applicable codes and standards
• Perform constructability reviews of interim design package submittals
• Develop and implement a comprehensive quality audit plan of design, procurement, construction, and testing activities in accordance with necessary guidelines
• Develop and maintain a database of quality audits and field quality surveillance reports to document the effectiveness of the Design-Build contractors' quality plan throughout design and construction
• Evaluate the progress of construction and ensure corrective action is implemented to resolve problems or field-related construction issues and any non-conformance matters in a timely and effective manner while assessing their impact on program costs and schedule
• Conduct routine quality program meetings with Design-Build contractor and program management staff to report on quality progress
• Assist in the development of special procedures for construction testing and inspection
• Assist in the close-out, certification, and system commissioning
• Direct the functional responsibilities and work schedules of quality assurance personnel

Skills on Resume: 

• Safety Review (Hard Skills)
• Site Inspection (Hard Skills)
• Plan Approval (Hard Skills)
• Code Compliance (Hard Skills)
• Constructability Review (Hard Skills)
• Audit Planning (Hard Skills)
• Progress Evaluation (Hard Skills)
• Team Leadership (Soft Skills)

Job Summary: 

• Improve equipment reliability and utilization factors
• Reduce the number of incidents and improve the safety performance of the plant
• Ensure the quality of the job implemented
• Maintain in-depth knowledge through records by continuous monitoring, including the safety conditions of this equipment
• Ensure and implement the planned inspection of all equipment and initiate work orders based on inspection results
• Monitor and coordinate the condition predictors for all critical equipment in the area
• Maintain and update trending charts and coordinate with other functions on the conditions of this equipment
• Participate in the reliability meeting for the development of corrective actions and improvements on the equipment
• Review and evaluate maintenance inspection plans as recommended by suppliers and proposed changes
• Represent the plant in any specific inspection to be conducted by experts and suppliers (technical audit), non-destructive testing by suppliers, etc.
• Validate equipment specification and history sheets
• Control and supervise the balancing and alignment of dynamic equipment in the absence of supplied services or skills
• Attend seminars and training programs at the instruction of the superior
• Comply with company and safety policies, rules, and regulations, and standard operating procedures
• Comply with environmental and quality system programs specific to tasks in the program applicable to the area

Skills on Resume: 

• Equipment Reliability (Hard Skills)
• Safety Improvement (Soft Skills)
• Quality Assurance (Hard Skills)
• Inspection Planning (Hard Skills)
• Condition Monitoring (Hard Skills)
• Data Trending (Hard Skills)
• Corrective Actions (Hard Skills)
• Policy Compliance (Soft Skills)

Job Summary: 

• Meet productivity and quality goals
• Read, understand, and interpret engineering drawings and complex blueprints
• Inspect products using precision measuring tools (calipers, thread gages, go/no-go gages, etc.)
• Operate Micro-Hite, Romer Arm, and Optical Comparator measurement equipment
• Perform Optical Comparator inspections using existing inspection programs
• Prepare detailed inspection reports
• Perform incoming quality inspection on electro/mechanical parts in accordance with engineering blueprint drawings and Mil-Standard requirements
• Read and interpret vendor certifications for completeness and accuracy in accordance with imposed quality clauses
• Perform complex inspection activities to assess conformance of products to the design by the engineering drawings
• Inspect products, components, subassemblies, and systems to ensure conformance to requirements
• Generate non-conforming material reports (NMRs)

Skills on Resume: 

• Productivity Goals (Soft Skills)
• Blueprint Reading (Hard Skills)
• Tool Inspection (Hard Skills)
• Equipment Operation (Hard Skills)
• Comparator Inspection (Hard Skills)
• Report Preparation (Hard Skills)
• Quality Inspection (Hard Skills)
• Nonconformance Reporting (Hard Skills)

Job Summary: 

• Inspect and test mechanical installations in progress and upon completion
• Advise contractors on changes required to assure code compliance, engage in periodic surveillance of assigned areas to detect violations, and perform inspections of existing commercial businesses for Certificates of Use and Occupancy
• Provide information to contractors and the public and assist in the resolution of disagreements
• Conduct field inspections of air-conditioning and heating systems, insulation, pressure and process piping, refrigeration, cooling towers, pneumatic tube conveyors, medical gases, industrial and commercial ventilating systems, commercial kitchen exhaust systems, spray booths, fire sprinkler systems, and similar equipment and mechanical systems
• Perform acceptance tests for mechanical systems, including exhaust and supply fan operation, discharge tests for automatic fire suppression systems, and other test procedures
• Provide recommendations and suggestions to contractors regarding changes necessary to assure compliance with the building code
• Perform inspections on existing commercial businesses such as industrial food handlers, taverns, nightclubs, restaurants, auto repair facilities, manufacturing plants, and warehouses for Certificates of Use and Occupancy
• Verify the fire integrity of building construction for fire-rated shafts, partitions, and ceilings
• Conduct routine and periodic patrols and inspections of the assigned area to detect code violations
• Organize inspection route schedule and maintain accurate records of inspections
• Answer telephone calls from contractors and the public and offer information and clarification
• Assist in resolving conflicts between contractors and the public
• Approve qualifications for homeowners' permits

Skills on Resume: 

• Mechanical Inspection (Hard Skills)
• Code Compliance (Hard Skills)
• Contractor Guidance (Soft Skills)
• Field Testing (Hard Skills)
• Fire Safety (Hard Skills)
• Route Scheduling (Hard Skills)
• Record Keeping (Hard Skills)
• Conflict Resolution (Soft Skills)

Job Summary: 

• Verify the conformity of parts, assemblies, and sub-assemblies in line with engineering drawings, the quality management system, and any special customer requirements
• Be responsible for the comprehensive completion and auditable traceability of inspection records
• Support production with the timely verification of the batch first off
• Create and compile First Article Inspection Reports (FAIRs)
• Carry out inspection duties across all areas of the manufacturing and supply chain process
• Identify and report non-conformance as per the procedure
• Ensure compliance with quality assurance and HSE policies and procedures at all times
• Process, process and return (P&R) documentation for parts dispatched for external processing
• Escalate quality concerns to production management and quality engineering
• Support problem-solving to drive root cause analysis and preventive action
• Participate in new product introduction planning meetings and advise on inspection methodology
• Participate in continuous improvement initiatives

Skills on Resume: 

• Parts Verification (Hard Skills)
• Record Traceability (Hard Skills)
• Batch Verification (Hard Skills)
• FAIR Preparation (Hard Skills)
• Nonconformance Reporting (Hard Skills)
• Policy Compliance (Soft Skills)
• Problem Solving (Soft Skills)
• Process Improvement (Soft Skills)

Job Summary: 

• Perform and verify dimensional, mechanical, and visual inspection functions relating to first article piece(s), receiving, in-process, final check, and test operations using supplied drawings, equipment, metrology, procedures, and work instructions
• Perform verification of incoming, first article samples, in-process, and product inspection in accordance with work procedures and customer requirements
• Handle department records, documentation, and filing as defined in QC work instructions and as instructed and required by department leadership
• Support the audit function through quality management
• Ensure parts meet specifications, test, and quality requirements
• Document inspection issues, problems, and concerns, then notify the customer and appropriate internal functions using the DMR, MRB, and CAR processes
• Initiate, track, and support supplier corrective action requests to completion
• Handle special projects as per the department inspection supervisor and management team’s instructions promptly
• Prepare, assure accuracy, and submit secondary work instructions
• Complete First Article Inspection disposition documents and notify suppliers of the sample approved or non-approved results
• Respond to and communicate with supplier and product management team inquiries in a timely, clear, concise, and comprehensive manner

Skills on Resume: 

• Dimensional Inspection (Hard Skills)
• Product Verification (Hard Skills)
• Record Management (Hard Skills)
• Audit Support (Hard Skills)
• Specification Compliance (Hard Skills)
• Issue Documentation (Hard Skills)
• Supplier Coordination (Soft Skills)
• Clear Communication (Soft Skills)

Job Summary: 

• Attend to inspection requests (IRs) submitted by the contractor and take appropriate action promptly
• Review submitted shop drawings against contract drawings and specifications, local codes and statutory requirements, and international best practice
• Report any works carried out by the contractor found not to be in accordance with the approved drawing and specifications and report to stakeholders for appropriate action
• Monitor the quality of work and assess the safety at the site, including health and environmental issues, ensuring compliance with contractual and QCS specifications and safety and health risk assessments
• Maintain records for daily activities on site, including progress photos, and ensure they are readily available for inspection
• Prepare surveillance reports for deficiencies of work found at the site and non-conformance reports (NCR) in view of the development of events
• Check and ensure effective coordination between discipline-related works and all other disciplines
• Provide technical input and experience to resolve any discipline-related issues on-site that may arise

Skills on Resume: 

• Inspection Response (Hard Skills)
• Drawing Review (Hard Skills)
• Work Reporting (Hard Skills)
• Quality Monitoring (Hard Skills)
• Record Maintenance (Hard Skills)
• Deficiency Reporting (Hard Skills)
• Work Coordination (Soft Skills)
• Technical Support (Soft Skills)

Job Summary: 

• Participate in the risk analysis to ensure safe and timely execution of the works
• Conduct daily safety tours, toolbox talk audits, and ensure all safety issues are reported through site management promptly
• Deliver onshore construction projects, ensuring that no additional remedial
• Ensure that the resources and organization from the contractor are adequate for the workload related to quality control on structural activities
• Ensure that all required inspections, audits, or equipment certifications are performed in time and that all corrective action plans are properly implemented by the contractor
• Ensure the timely completion of the works and monitor closely the contractor's performance, work schedule, and progress
• Implement the weekly and monthly yard progress for quality control aspects
• Liaise with the EPCIC contractor QA/QC team and certifying authority for control implementation
• Centralize and maintain all the quality documentation produced on the yard and ensure follow-up and traceability
• Attend all inspection activities as per the approved ITP
• Conduct site quality surveillance and monitoring and participate in audits
• Ensure the readiness on time and the compliance with company rules and procedures for all cargo to be

Skills on Resume: 

• Risk Analysis (Hard Skills)
• Safety Auditing (Hard Skills)
• Project Delivery (Soft Skills)
• Resource Assessment (Hard Skills)
• Inspection Compliance (Hard Skills)
• Work Monitoring (Hard Skills)
• Documentation Control (Hard Skills)
• Quality Surveillance (Hard Skills)

Job Summary: 

• Conduct final product inspections using schematics and quality assurance guidelines set by the SOP
• Complete inspection documentation to ship with the product
• Alert management of ongoing or recurring problems
• Communicate with other departments regarding issues with stock
• Read engineering schematics and compare them with the finished product
• Keep digital files and reports on product quality up to date
• Move finished goods from inspection and assist with wrapping and packing, ready for collection
• Assist with mechanical assembly

Skills on Resume: 

• Product Inspection (Hard Skills)
• Documentation Completion (Hard Skills)
• Problem Reporting (Soft Skills)
• Issue Communication (Soft Skills)
• Schematic Reading (Hard Skills)
• Record Maintenance (Hard Skills)
• Material Handling (Hard Skills)
• Mechanical Assembly (Hard Skills)

Job Summary: 

• Inspect samples per documented specifications
• Coordinate the flow of inspection samples based on priority
• Analyze data to determine trends in inspection history
• Perform inspections using mechanical gaging
• Identify the appropriate gauges needed to measure engineering drawing requirements
• Visually identify the inspection sample status
• Assist in cost reduction opportunities and design change suggestions
• Identify and contain nonconforming material
• Create and communicate nonconforming material reports
• Identify corrective action opportunities (CAR)
• Identify and communicate engineering change request (ECR) opportunities
• Support gauge R&R studies
• Support employee quality training programs and communications
• Support cross-functional team projects
• Identify quality improvements, cost reduction opportunities, and design change suggestions

Skills on Resume: 

• Sample Inspection (Hard Skills)
• Workflow Coordination (Soft Skills)
• Data Analysis (Hard Skills)
• Gauge Operation (Hard Skills)
• Visual Inspection (Hard Skills)
• Nonconformance Reporting (Hard Skills)
• Corrective Actions (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Plan and perform routine and non-routine mechanical inspection efficiently and effectively using pre-determined methods for product acceptability
• Verify inspection data with double gaging to assure integrity and resolve discrepancies found during the part inspection
• Support quality engineering with MRB identification and processing of discrepant material
• Use the operating system to generate inquiries, perform movement of material, and any other function required to perform job duties
• Implement expedient methods of inspection to maintain product flow in accordance with directives, including assistance in the validation of fixtures and gauges
• Use a corrective action system and a subsequent follow-up process to resolve deficiencies found during the job function
• Communicate effectively with supervisors regarding problems and corrective action
• Seek and act upon ways to improve daily work processes to enhance quality and productivity and satisfy customer needs and expectations
• Look for cost reduction and service improvements, and eliminate unnecessary or low-priority work
• Initiate and encourage others to resolve impediments and act on improvement opportunities
• Participate in problem-solving teams for driving the root cause of internal and external quality failures, particularly related to the prevention of customer escapes
• Participate in 5S workplace organizational activities and maintain the area in good working order through sustainment activities, including requests for maintenance assistance

Skills on Resume: 

• Mechanical Inspection (Hard Skills)
• Data Verification (Hard Skills)
• Material Review (Hard Skills)
• System Operation (Hard Skills)
• Fixture Validation (Hard Skills)
• Corrective Actions (Hard Skills)
• Effective Communication (Soft Skills)
• Process Improvement (Soft Skills)

Job Summary: 

• Act as the key interface with stakeholders, including the quality team and the TDA framework management
• Be visible in the workplace and lead by example, demonstrating the standards set by the business
• Manage welder qualifications along with the supervision of the testing process
• Support and advise the design team on specs, procedures, weld processes, and inspection requirements
• Carry out NDT (MPI/DPI) and review radiographs both on-site and at supply chain facilities
• Conduct daily site visits to the workforce, especially within the active area
• Support the delivery of the project utilizing the JFS and working procedures
• Support the quality manager with the management of quality management systems
• Undertake and witness pressure tests and NDT
• Carry out and organize trials (heat tint and passivation)
• Produce weld cards before fabrication or installation
• Ensure contract requirements are met (SLM 4.06.02)
• Undertake goods inwards inspection of materials and approve or reject on behalf of the project
• Inspect welds and perform mechanical inspection
• Produce daily logs and reports
• Approve subcontractors and suppliers (CFMT 121 forms)
• Produce and review TQ, PP, and AC

Skills on Resume: 

• Stakeholder Management (Soft Skills)
• Leadership Example (Soft Skills)
• Welder Qualification (Hard Skills)
• Design Support (Hard Skills)
• NDT Inspection (Hard Skills)
• Site Visits (Soft Skills)
• Quality Systems (Hard Skills)
• Report Preparation (Hard Skills)

Job Summary: 

• Adhere to safety procedures and guidelines at all times
• Maintain safety precautions at all times
• Keep the work area in a clean and orderly condition
• Perform receipt and in-process inspections on material purchased or supplied by customers for use in fabrication
• Document and record inspection results and report results
• Determine the calibration status of inspection and measuring equipment to ensure it is in proper condition for use and that inspection, examination, and test procedures are approved
• Assist production in the set-up of material and components for receipt inspection
• Review certified material test reports and verify conformance to purchase order requirements

Skills on Resume: 

• Safety Compliance (Soft Skills)
• Workplace Cleanliness (Soft Skills)
• Material Inspection (Hard Skills)
• Result Documentation (Hard Skills)
• Equipment Calibration (Hard Skills)
• Production Support (Hard Skills)
• Report Review (Hard Skills)
• Order Conformance (Hard Skills)

Job Summary: 

• Work as a mechanical inspector responsible for using a wide variety of precision measuring equipment
• Perform mechanical inspection of critical tolerances of machined parts, assemblies, and completed units
• Inspect incoming material using a variety of measuring instruments
• Prepare nonconformance reports for material not meeting specifications and interact with appropriate departments for corrective action
• Work with and import solid models for CMM programming
• Utilize tooling, gauges, specifications, and blueprints
• Utilize the AS9100 first article process and associated documentation
• Use the ERP system to verify purchase order requirements
• Originate and update inspection and test instructions

Skills on Resume: 

• Precision Measurement (Hard Skills)
• Tolerance Inspection (Hard Skills)
• Material Inspection (Hard Skills)
• Nonconformance Reporting (Hard Skills)
• CMM Programming (Hard Skills)
• Blueprint Utilization (Hard Skills)
• First Article (Hard Skills)
• ERP Verification (Hard Skills)

Job Summary: 

• Be responsible for receiving, inspecting, and disposing of materials and parts that have been ordered from suppliers for use in building products and supporting functions
• Use different electrical and mechanical measurement equipment and inspection through magnification to verify that items meet the requirements specified in documents
• Review documentation on incoming goods to verify they meet applicable standards and regulations
• Use computer systems to receive, move, and identify products at different stages of the receiving and inspection process
• Assist in tracking incoming goods and supplier performance, and report findings to the director of quality
• Measure and inspect finished products or assemblies for accuracy to verify adherence to specifications
• Verify product dimensions with micrometers, calipers, height gauges, pin gauges, templates, and go/no-go gauges
• Perform first article and finished product inspections of mechanical elements to ensure conformance with engineering drawings

Skills on Resume: 

• Material Inspection (Hard Skills)
• Measurement Equipment (Hard Skills)
• Document Review (Hard Skills)
• System Utilization (Hard Skills)
• Supplier Tracking (Soft Skills)
• Product Measurement (Hard Skills)
• Dimension Verification (Hard Skills)
• First Article (Hard Skills)

Job Summary: 

• Constantly monitor documentation for accuracy and completeness
• Perform measurements accurately according to the best practice for the given size, geometry, and tolerance
• Respond rapidly to the needs of operators, teams, and management to meet production and customer needs
• Read and analyze blueprints to obtain product information, such as specified material, surface finish, and dimensions
• Measure dimensions such as length, height, depth, diameter, and angles using standard and precision measuring instruments such as micrometers, calipers, dial indicators, gauge blocks, height gage, bore gages, and profilometer
• Communicate with co-workers, supervisors, and customers to receive instructions and coordinate activities
• Check and fill in all inspection data on QC reports
• Conduct and document observations of construction as it progresses
• Serve as the most senior inspector on projects

Skills on Resume: 

• Document Monitoring (Hard Skills)
• Accurate Measurement (Hard Skills)
• Rapid Response (Soft Skills)
• Blueprint Analysis (Hard Skills)
• Dimension Measurement (Hard Skills)
• Effective Communication (Soft Skills)
• Data Reporting (Hard Skills)
• Construction Observation (Hard Skills)

Job Summary: 

• Conduct inspections of incoming vehicles to detect damage, missing parts, and mechanical problems
• Prepare and submit reports of vehicle condition
• Conduct assessment of vehicle condition upon receipt, noting any damage or repair required for frame, paint, engine, AC or heater operation, radio, navigation system, tires, etc.
• Prepare support documentation related to vehicle condition, including vehicle identification data, condition description, photographs, etc.
• Maintain current knowledge and adhere to work instructions and procedures regarding inspections and documentation
• Provide operators and crafts with training on basic equipment knowledge to help them better understand equipment operation
• Inspect and log shelf life material and chemicals and affix expiration date labels
• Conduct walk-around inspections
• Follow all applicable safety and health-related procedures

Skills on Resume: 

• Vehicle Inspection (Hard Skills)
• Condition Reporting (Hard Skills)
• Damage Assessment (Hard Skills)
• Documentation Preparation (Hard Skills)
• Procedure Adherence (Hard Skills)
• Employee Training (Soft Skills)
• Material Inspection (Hard Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Inspect mechanical and electromechanical parts, piece parts, subassemblies, and assemblies for workmanship and conformance to engineering standards and production specifications
• Use precision measuring tools, coordinate measuring machines, and electronic instruments and perform inspections in accordance with authorized specifications and quality control standards
• Set up and operate test equipment utilizing hydraulic and air gages, electrical devices, and other types of gages and testing equipment necessary for inspection
• Stamp or approve acceptable work or prepare paperwork for rework or rejection, noting deviations
• Ensure the history of the inspection process is kept up to date by properly maintaining the inspection records and history on fabricated and purchased parts
• Keep nonconforming parts from being kept in stock by purging stock 
• Read and understand complex blueprints
• Perform a variety of visual and dimensional inspections of machined, plastic, and sheet metal parts, including flat pattern design, fixtures, gauges, and completed assemblies, to determine precise conformance to specifications, tolerances, and workmanship standards
• Complete inspections and record results, including generating comprehensive nonconformance reports to allow the MRB to understand the nonconformances without the need for further clarification
• Perform all duties while maintaining compliance with all regulatory and quality system requirements
• Use fine manipulation and simple grasping to utilize a computer and handheld inspection equipment

Skills on Resume: 

• Parts Inspection (Hard Skills)
• Tool Utilization (Hard Skills)
• Equipment Operation (Hard Skills)
• Work Approval (Hard Skills)
• Record Maintenance (Hard Skills)
• Stock Control (Hard Skills)
• Blueprint Reading (Hard Skills)
• Nonconformance Reporting (Hard Skills)

Job Summary: 

• Perform inspections of purchased hardware where specialized equipment and facilities are required
• Perform inspections utilizing a variety of techniques, inspection equipment, and instruments, including visual, layout methods, and various conventional types of mechanical measurement devices
• Perform inspections to specifications, drawings, planning, quality procedures, industry standards, and other customer or company documents
• Perform general and periodic surveillance of work and associated storage areas
• Handle, utilize, maintain, and store inspection equipment in a manner to prevent damage, abuse, or neglect and to maintain its serviceability
• Perform critical quality-testing activities on projects covering mechanical installations and hardware testing
• Perform the first article (FA) inspection to validate product requirements with little to no assistance
• Apply established inspection procedures and recommend changes to inspection formats and procedures to improve the quality process
• Inspect complex machined and molded tools, fixtures, and parts using advanced measuring and layout instruments and equipment and visual and mechanical inspection methods
• Present hardware and documentation for source inspection review to the customer and government representatives
• Assist in the training of other personnel

Skills on Resume: 

• Hardware Inspection (Hard Skills)
• Measurement Techniques (Hard Skills)
• Specification Compliance (Hard Skills)
• Work Surveillance (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Quality Testing (Hard Skills)
• First Article (Hard Skills)
• Personnel Training (Soft Skills)

Job Summary: 

• Perform receiving inspections of products to determine conformance to the customer's engineering prints and specifications, utilizing standard mechanical instruments, CMMs, functional gauges, test fixtures, and electronic diagnostic instruments for variable data collection
• Follow manufacturing plans and inspection procedures to report product status accurately, record turn-backs for resolution, and identify nonconforming material to be properly documented and segregated
• Prepare and use standard documentation for reporting variable test data, SPC, and detailed inspection plans for recording measurement results
• Exhibit accuracy in judgment for ascertaining critical components and possess administrative qualities for document collection
• Perform FAI submittals to customers and perform delegated inspection services on the customer's behalf
• Witness and monitor suppliers' and contractors' work activities, inspections, and tests in accordance with the approved quality plan, ITP, quality procedures, etc.
• Oversee inspection of mechanical equipment, piping, structure, and welding activities conducted at shops and construction sites
• Oversee EPC and various subcontractors at the site
• Witness and participate in equipment receiving inspection at the construction site to identify damage or deficiencies of packages coming directly from vendors and modular yards, and ensure the shipping and packaging procedures have been followed as per the specification
• Verify CRN requirements and ensure that local, provincial, and federal Canadian laws, regulations, standards, and codes that apply to the equipment and services are strictly followed
• Witness in-process inspections per ITP and inspection requests to ensure work proceeds in accordance with specifications, the approved drawings, and procedures

Skills on Resume: 

• Receiving Inspection (Hard Skills)
• Procedure Compliance (Hard Skills)
• Data Reporting (Hard Skills)
• Critical Judgment (Soft Skills)
• FAI Submittals (Hard Skills)
• Supplier Oversight (Hard Skills)
• Equipment Inspection (Hard Skills)
• Regulatory Compliance (Hard Skills)