• Execute plans of wiring for lighting, communications, and other electrical systems.
• Install safety and distribution components, including switches, resistors, circuit breaker panels, etc.
• Install electrical fixtures and equipment for alarm and other systems.
• Connect wiring in electrical circuits and networks, ensuring compatibility of components.
• Prevent breakdown of systems by routinely inspecting and replacing old wiring and insulated cables, cleaning circuits, etc.
• Perform effective troubleshooting to identify hazards or malfunctions and repair or substitute damaged units.
• Discover opportunities, make recommendations, implement improvements in conditions, and execute various electrical systems.

Skills: Wiring Installation, Safety Components, Fixture Installation, Circuit Connections, System Maintenance, Troubleshooting Repairs, System Inspection, System Improvements

• Build/wire panels following schematic drawings
• Physical assembly, wiring, and testing
• Panel construction per layout drawings and bill of materials
• Work to deadlines and maintain technical knowledge
• Work as part of a team and independently, assist others
• Maintain consistent high-quality work standards, and know electrical standards
• Adhere to all health and safety procedures
• Perform duties following all company policies and procedures

Skills: Panel Wiring, Physical Assembly, Panel Construction, Deadline Management, Teamwork, Quality Standards, Safety Compliance, Policy Adherence

• Leading the installation of electrical systems by connecting residential solar arrays to the grid
• Ensuring all work installed by electricians is of exceptional workmanship and meets all applicable local and national compliance codes or requirements
• Troubleshooting, resolving, and upgrading systems to ensure long-term system reliability and availability
• Maintaining excellent working relationships with partners, inspectors, and homeowners to meet and exceed system requirements and scheduled timelines
• Developing and communicating technical standards to electricians
• Keeping accurate records of material consumption and proper maintenance of PPE and vehicles

Skills: Solar System Installation, Code Compliance, System Troubleshooting, System Upgrades, Relationship Management, Technical Communication, Record Keeping, Equipment Maintenance

• Conducts electrical installations, including running conduit, sizing wire, based on NEC requirements
• Troubleshoots and repairs all electrical equipment per NEC requirements
• Works with voltages as high as 3-phase to 480
• Installs and maintains machinery and controls to meet or exceed NEC requirements
• Maintains lighting and all electrical equipment
• Designs and wires, power and control circuits
• Works with programmable controllers (programming, editing, and troubleshooting)
• Works on installing switches, controls, central and subsidiary control panels, electrical devices, and other gear incidental to the installation
• Diagnoses electrical troubles, repairs replaces apparatus
• Forming wiring diagrams, schematic drawings, and codebook, uses all required electrical measuring and testing devices
• Instructs and layouts work for apprentices
• Creates and maintains electrical documents and SOPs
• Performs preventative maintenance
• Maintains job-related inventory as well as up-to-date technical training
• Adheres to all the Company’s Food Safety procedures and policies
• Attends all the Company’s training meetings

Skills: Electrical Installation, Troubleshooting Repair, High Voltage Work, Machinery Maintenance, Circuit Design, PLC Programming, Documentation Management, Preventative Maintenance

• Maintain and repair systems
• Electrical faults on mechanical and air-conditioning systems,
• Daily/Weekly lamp inspections and changing of lamps and fittings (responding to calls on the same)
• Electrical repairs, as well as testing and tagging
• Participation in the on-site roster to ensure appropriate site coverage as per contractual compliance
• Participation in on-call/after-hours roster
• Customer relationship management and satisfaction
• Ensure the safety of staff and the public using the facility

Skills: System Maintenance, Fault Diagnosis, Lamp Inspection, Electrical Repair, Roster Participation, On-Call Support, Customer Management, Safety Assurance

• Day-to-day reactive and planned maintenance and repair of electrical systems, through the college's works reporting system
• Carry out electrical repairs, installations, and maintenance procedures following current best practice and NICEIC standards.
• Carry out testing of installed electrical circuits, full installation, and minor works
• Work closely with the other Estates teams.
• Ensure that the workshop is maintained in a clean and tidy manner
• Ensure that their vehicle is maintained and kept clean and tidy
• Maintain safe working practices and operate safe systems of work as directed by the Senior Electrician.
• Maintain stock levels by informing the Senior Electrician when running low.
• Attend relevant training courses as arranged periodically and agreed between the Senior Electrician and the Head of Estates.
• Assist with small construction projects and college refurbishments.
• Carry out additional work in support of the Estates Team as directed by the Head of Estates.

Skills: Electrical Maintenance, Electrical Repair, Circuit Testing, Team Collaboration, Workshop Upkeep, Vehicle Maintenance, Safety Practices, Inventory Management

• Electrical testing equipment and troubleshooting high/low voltage systems
• Reading and understanding blueprints, schematics, wiring diagrams, and specifications
• Proper interpretation of the National Electric Code, National Fire Protection Association (NFPA) code, and all related regulatory codes associated with a healthcare facility
• Maintenance, inspection, and service on all electrical services, primary, secondary, transformers, motor generator systems, main switch gear, fire alarm notification, UPS, and any related life safety systems applicable to NSMC
• Responding to and taking appropriate action for emergencies such as fire alarms, power outages, internal and external disasters, following Plant Operations procedures

Skills: Electrical Testing, System Troubleshooting, Blueprint Reading, Code Interpretation, Electrical Maintenance, Equipment Inspection, Emergency Response, Life Safety Systems

• Replace, repair, and install various electrical fixtures and equipment.
• Inspect existing electrical fixtures and equipment for malfunctions or defects.
• Test completed work for proper performance, and ensure compliance with the National Electrical Code.
• Work from schematic drawings, wiring diagrams, and engineering drawings, and create as-built drawings.
• Disconnect, remove, and disassemble electrical equipment and components of electrical systems
• Use formulas basic to the trade to figure voltage and resistance, determine the size, types, and gauge of wiring conduit, couplings, fittings, relays, controls, and distribution panels
• Employ splicing, soldering, cutting, tapping, and taping techniques in performing electrical service and unit maintenance.
• Participate in multi-skill activities, in support of other trades, to meet customer requirements.
• Install electrical services and equipment (electrical panels, switches, magnetic starters, and receptacles) for new offices and facilities on the campus.
• Install, pull, and splice wiring (e.g., #14 AWG up to 750 MCM) for electrical panels, switches, receptacles, magnetic starters, lighting fixtures, and control wiring for motors, generators, air conditioners, heat pumps, computers, and plant machinery.
• Assist in the installation of low-voltage (480 V or less) switchgear and transformers (5 to 112 KVA) for APL internal power distribution.
• Provide electrical construction support at field test sites.

Skills: Fixture Installation, Equipment Inspection, Performance Testing, Drawing Interpretation, Equipment Removal, Electrical Calculations, Wiring Techniques, Construction Support

• Install conduit and other raceway systems for power distribution wiring and communications systems wiring, following applicable codes and standards
• Troubleshoot electrical control schematics for a wide variety of equipment and systems to identify and correct problems.
• Repair and install electrical distribution equipment, transformers, panels, devices, fixtures, and other components of power distribution systems, including three-phase 208-volt and 480-volt systems, to provide dependable, reliable service following applicable codes and standards.
• Repair and install contactors, overloads, starters, and other related equipment to ensure proper operation of motor controls for equipment and systems of the facility
• Install and service intercom, paging, television, telephone, low voltage, fire alarm, and other communications-type systems to ensure dependable operation.
• Read and interpret riser drawings, construction documents, and other documentation to understand and service the electrical systems of the facility.
• Prepare material lists for projects from drawings to ensure that work can proceed promptly and efficiently.
• Use tools such as a core drill, band saw, pipe bending equipment, pipe cutting and threading equipment for rigid conduit, and other tools required for the installation of major equipment or project work.
• Understand general principles of operation of high voltage distribution systems and emergency power systems to be able to recognize abnormal conditions and assist in coordinating repairs and service work.
• Test and perform monthly PM on the Generator and Emergency Power Systems
• Ensures proper care in the use and maintenance of equipment and supplies, and promotes continuous improvement of workplace safety and environmental practices.

Skills: Conduit Installation, Schematic Troubleshooting, Equipment Repair, Motor Controls, System Installation, Drawing Interpretation, Material Preparation, Safety Practices

• Plan, layout, install, wire, and test electrical equipment and make supervised tests on all products.
• Utilize and conform to standard work
• Instruments, testing equipment, test motor generator sets, conduit bending and threading machines, soldering equipment, drills, pliers, wire strippers, other hand and power tools, jib and overhead cranes, drawings, wire diagrams, etc.
• Electrical equipment and components, conduits, wires, cables, straps, tape, other miscellaneous hardware items, etc.
• Secure job assignment and partial instructions for complex work, facilities, and materials.
• Layout and determine the sequence of operations.
• Plan, layout, and install electrical equipment and components from complete or incomplete engineering specifications, schematics drawings, manually or with jib or overhead cranes, bending and threading machines, etc.
• Layout and install routine wire circuits and connect pre-wired components.
• Determine length, measure, cut, bend and thread pipe, cable, conduit and run wire using hands and install using jib and overhead cranes, power tools, pliers, soldering equipment, strippers, screw drivers, hammers, power drills, benders, etc.
• Complete circuits and test using oscilloscopes, watt meters, volt meters, phase sequence meters, tachometers, stroboscopes, power packs, amplifiers, amplidynes, dynamometers, meggers, etc.
• Strip, splice, solder, and connect lugs, terminals, etc.
• Make supervised tests using complex testing equipment.
• Perform tests on standard units not involving adjustments.
• Diagnose troubles and make necessary changes and adjustments.
• Understand rotating, relay, and electronic circuits and lead others in installation, testing, and diagnosing.
• Interpret and manipulate fully automatic controls and may work with engineering staff in resolving production problems.
• Identify, mark, disassemble, and prepare for storage and shipment.
• Perform above operations with great care and safety for other on electrical equipment and components such as the wiring of master switches and selector switches to terminal boards on control stands, processing, installation and connection of armored cable ends to generators, motors, control stands, junction points, etc., installation of standard light plants on drills on quarry type excavators, panels, cabinets, compartments, motors, generator, control units, lighting equipment and fixtures, and other miscellaneous electrical equipment on all products such as excavators, etc.
• Utilize equipment to the fullest extent.
• Keep facilities, materials, and work area clean and orderly, exercising care in their use and assisting in their maintenance.

Skills: Equipment Installation, Standard Work, Tool Operation, Sequence Planning, Circuit Testing, Troubleshooting, Control Systems, Safety Compliance

• Trade-qualified Electrician with an equivalent Queensland Electrical Fitter or Electrical Mechanic Licence
• Instrumentation Qualification
• An ability to lead by example and a strong work ethic
• Post-trade experience and expertise in using Allen Bradley Control Logic PLC and Yokogawa CS3000
• A high level of communication and interpersonal skills, along with a professional work standard
• Experience and demonstrated knowledge with HV and LV motors, variable speed drives, soft starters, and conveyor systems
• Experience with Ramsay Weighers, SMC positioners, ultrasonic level transmitters, differential pressure transmitters, and magnetic flows

Qualifications: BS in Mechatronics Engineering with 4 years of Experience

• Previous domestic, social housing experience
• Minimum NVQ Level 3 Electrical Installation
• City and Guilds 18th Edition
• Inspection and Testing 2391/2 or equivalent
• Experience with installing, servicing, and maintaining electrical systems and appliances following the current Edition of IET Wiring Regulations.
• Knowledge to install, repair, inspect, and test electrical installations
• Ability to correctly fill in the appropriate Electrical Certificate or Electrical Condition Report.

Qualifications: BS in Electrical Engineering with 3 years of Experience

• Experience in pharmaceutical or FDA interfacing industry (intern or shadowing opportunity)
• Experience in an engineering or technical role (including intern or shadowing opportunity)
• Experience in manufacturing or production (including intern or shadowing opportunity
• Building technical skills through a tailored entry-level development program, working with industry professionals
• Experience working on projects and prioritizing tasks
• An understanding of state-of-the-art technologies
• Developing skills in an industry that’s making innovative changes to the way it develops and manufactures products

Qualifications: BS in Automation Engineering with 1 year of Experience

• Previous experience in a similar role in the hotel/leisure/retail sector
• Knowledge of Video Conferencing, trussing, and rigging
• Knowledge and experience of computer-based programs and the installation of IT equipment
• Positive attitude with good communication skills
• Committed to delivering high levels of customer service
• Flexibility to respond to a range of different work situations
• Ability to work on your own or in teams

Qualifications: BS in Electromechanical Engineering with 2 years of Experience

• PLC programming and troubleshooting experience
• Experience troubleshooting AC/DC drives and high-speed computer-controlled production machinery.
• Outstanding communication and team-orientation skills.
• Experience with technical certification (or equivalent) 
• Knowledge of servos and related controllers, including hydraulic, pneumatic, and temperature controls.
• Application of high-level quality standards.
• Superior attention to safe work practices.
• Excellent computer skills.
• Superior work history, including good attendance.
• Have an AutoCad background

Qualifications: BS in Electrical Technology with 5 years of Experience

• Electrical maintenance experience in a mining equipment maintenance environment, preferably repairing and maintaining drills, shovels, and support equipment.
• Electrical Engineering Technician certificate.
• Electrical Trade training, apprenticeship.
• MINCOM is certified as an Inspection Engineer
• Advanced knowledge of mechanical maintenance principles and industry standards.
• Advanced knowledge and experience in maintaining drills, shovels, and support equipment.
• Knowledge of the work management process.
• Knowledge of planning and scheduling.
• Knowledge of Computerized Maintenance Management System (CMMS)/Enterprise Resource Planning (ERP).
• Strong communication (written and verbal) and interpersonal skills.
• Ability to identify problems and to report by using the technical names of equipment parts.
• Ability to develop/maintain electrical distribution, generation, and transmission systems and networks.
• Ability to correctly read power meters and record the readings accurately.
• Ability to maintain, commission equipment following legislation, regulations, and international standards.
• Ability to manage the quality of operations following the quality standards of the organisation and international best practice.

Qualifications: BS in Industrial Electrical Technology with 7 years of Experience

• Electrical manufacturing experience
• Operational understanding of manufacturing processes
• Demonstrated knowledge of behavior-based safety systems
• Ability to sit, stand, walk, lift, and complete repetitive physical tasks throughout the day, including occasionally lifting to 50 pounds
• Basic computer skills, including proficiency with Microsoft Office applications
• Effective communication, interpersonal, technical, problem-solving, and organizational skills
• Experience with programmable logic controllers
• Previous experience in a food manufacturing setting
• Licensed journeyman (electrical) license

Qualifications: BS in Electronics Engineering Technology with 3 years of Experience

• Industrial Maintenance Electrician License (442A or 309A)
• Direct experience programming, designing, and maintaining industrial control systems in a fast-paced process industry.
• Strong knowledge of process control systems and automation, specifically Allen Bradley/Rockwell and Wonderware programming, hardware management, and commissioning.
• Knowledge of Funuc robotics, Elau drives, Servo Axis controls, Vision systems, HMI programming, hardware management/commissioning, and Scada integration.
• Strong PLC Programming/troubleshooting skills
• Working knowledge of Word processing, spreadsheet, database management software, SQL Server, and Web server software.
• Strong communication skills, both verbal and written

Qualifications: BS in Renewable Energy Engineering with 4 years of Experience

• Must have a professional certification in an Engineering discipline.
• Must be able to demonstrate key electrical competencies and theory.
• Knowledge of and can apply safe electrical practice according to guidelines set by relevant electrical safety supervisory bodies (e.g., ECSSAI and RECI in Ireland)
• Competent in the use of basic IT programs such as MS Word/Excel or similar.
• Experience as a qualified electrician or engineer after obtaining the qualification.
• Professional Certification in power engineering or Controls engineering
• Working knowledge of generic mechanical-room infrastructure such as chillers, Cooler Units, and fan controls.
• Working knowledge of electrical equipment such as switchgear, transformers, and power distribution panels.
• Familiar with the use of a CMMS and Approval systems, working knowledge of backup generator systems
• Ability to maintain service level agreements (SLAs) through the implementation of proactive issue detection and immediate response.
• An ability to follow procedures, system documentation, and track issues through appropriate entries into a Trouble Ticket system.
• Demonstrate good judgment and instincts in decision making with strong communication skills.
• Prioritise appropriately in a complex, fast-paced environment.
• Be capable of actively engaging and working collaboratively with other support teams to drive the resolution of problems encountered
• Ability to take direction from both a directed work system and/or a team lead.

Qualifications: BS in Energy Systems Engineering with 5 years of Experience

• Experience with electrical protection and cable sizing for protection against overload, fire, electric shock, etc.
• Experience with fault finding down to the component level
• Working knowledge of electrical theory
• Practical tool skills, how to work with various cable types, build control panels, use power tools, etc.
• Strong organizational skills for mid-size prototyping projects
• Working knowledge of electrical regulations, not only for building wiring but for machine controls
• Strong electrical drawing, reading, and writing skills (being able to spot faults with not yet built systems)
• Understanding of measurement devices and general familiarity with instrumentation (which instrumentation to use, not only when and where to use different devices, but spec'ing devices for new experiments, along with experience in using them in the field)
• Good mechanical fitting skills
• Firm grasp of AC and DC theory, circuit design, and component specifications.
• Fully qualified electrician
• Experience with PAT testing, IOT, PLC (Programmable Logic Controller)

Qualifications: BS in Electrical Engineering with 6 years of Experience