• Report to the Resident Electrical Engineer
• Responsible for monitoring, witness testing, checking compliance with the scope, and ensuring that all works are carried out following the works contract.
• Manage the H&S system relevant to their work area.
• Participate in work activities that support the Quality Management system.
• Ensure 90% achievement in due date delivery of service.
• Check project documentation, drawings, and calculations.

Skills: Compliance Monitoring, Witness Testing, H\&S Management, Quality Support, Service Delivery, Documentation Review, Drawing Verification, Calculation Review

• Perform breakdown maintenance activities on the Surface and Underground electrical equipment to minimise the impact on production.
• Perform routine maintenance activities on electrical equipment on site as per the maintenance strategy.
• Assist in developing and reviewing maintenance procedures, policies, and work instructions
• Undertake electrical installation work.
• Ensure that the provisions of the Electrical Act SA 1996 and AS/NZS 3000:2018 are adhered to

Skills: Breakdown Maintenance, Routine Maintenance, Equipment Troubleshooting, Procedure Development, Policy Review, Electrical Installation, Regulatory Compliance, Standards Adherence

• Service work for products in the company’s scope of business, including in-house, site, and on board duties, etc., and completion of the related documentation
• Liaison work and meeting with customers, handling inquiries from customers
• Report customer and market information and feedback
• Update technical data, records, and information
• Organize teamwork in servicing duties
• Supervisory duties in teamwork and coaching of subordinate team members
• Control and improve work in terms of work progress, efficiency, cost saving, safety, adherence to company policies and instructions, and conduct of team members
• Coordinate with related inter-departments and MTU organizations, assist with application work and technical advice in engine sales and projecting activities
• Responsibility for the achievement of customer satisfaction, quality standards, and work targets
• Present a good company image and maintain good customer relationships
• Prepare servicing reports and complete of full set of standard servicing forms

Skills: Service Operations, Customer Liaison, Technical Reporting, Data Management, Team Coordination, Supervisory Skills, Process Improvement, Interdepartmental Coordination

• Troubleshoot, repair, and replace electric motors and electronic circuit boards and wiring, and components.
• Troubleshoot AC/DC drives.
• Diagnose electrical and technical failures during heavy production periods
• Perform preventative and corrective electrical maintenance on machinery.
• Perform within the guidelines of the National Electrical Code (NEC).
• Read diagrams, blueprints, and schematics
• Plan out wiring and installation of electrical apparatus in buildings.
• Safely drive to various locations

Skills: Motor Repair, Circuit Troubleshooting, Drive Diagnostics, Electrical Maintenance, NEC Compliance, Blueprint Reading, Wiring Installation, Safe Driving

• Create technical documentation, such as test process, electronic diagram, and test reports
• Support in assembling prototypes and setting up laboratory tests
• Design the critical test pattern for the product
• Advise the design team on the choice of materials
• Test and validate the prototype, and suggest a solution to solve the issue

Skills: Technical Documentation, Prototype Assembly, Lab Test Setup, Test Pattern Design, Design Advising, Material Selection, Prototype Testing, Issue Resolution

• Assemble electronics sub-systems, including the installation, hook-up, and interconnects for circuit board assemblies
• Run functional testing of the system and subsystem electronics hardware components
• Support system installation on aircraft at various CONUS sites.
• Assembly and repair of any portions of weapon systems, including mechanical, electrical, power, and electronics.
• Recommend technical documentation corrections during the integration and build process

Skills: Electronics Assembly, Circuit Installation, System Testing, Hardware Troubleshooting, Aircraft Installation, System Repair, Technical Documentation, Integration Support

• Collaborating with spec, manufacturing, design, and production teams for the planning and implementation of projects
• Reading electrical schematics and wiring machines and other production equipment to print
• Completing I/O and function testing for new model modifications and equipment, and completing quality checks before shipping to the customer site
• Travelling to Powertrain and Auto Plant locations for online installations
• Installation of production equipment at Powertrain and Auto Plants across North America
• Creating/adjusting/updating assembly and installation schedules for production equipment
• Directing and supervising contractors building and installing production equipment
• Electrical troubleshooting and debugging of equipment
• Mitsubishi and AB PLC, Servo, and Robotic installation and debugging
• Cognex, Keyance, and Fanuc IR camera debug

Skills: Team Collaboration, Schematic Reading, Machine Wiring, I/O Testing, Equipment Installation, Schedule Management, Contractor Supervision, Electrical Debugging

• Continually look for ways to introduce and improve Preventative Maintenance within the Electrical Department and put forward proposals to the Electrical Maintenance Supervisor for implementation
• Work closely with the Electrical Maintenance Supervisor on guiding and developing the Electrical Maintenance provision, including the development of Electrical personnel and systems.
• Provide a high standard of work feedback and ensure rectification of the root cause of electrical faults.
• Provide high-level technical support and advice to other electrical personnel
• Ensure all electrical tasks are planned and executed in a way to minimise plant downtime.

Skills: Preventative Maintenance, Process Improvement, Team Development, Fault Rectification, Technical Support, System Development, Work Planning, Downtime Reduction

• Carry out maintenance works in a diligent and timely manner to meet the requirements of port operations both individually and as part of a larger team (all following ABP’s risk assessments and Safe Systems of Work)
• Attend breakdowns/emergencies during both normal hours and out-of-hours to carry out all necessary repairs.
• Assist the Engineering leads in identifying future maintenance requirements/repairs required.
• Carry out maintenance works in conjunction with third-party contractors.
• Extract work orders from the Computerised Maintenance Management System (CMMS), undertake the required tasks extracted, and input any associated work history.
• Communicate with both the marine operations departments and external customers during servicing operations and the repair of plant and equipment.
• Organise plant, labour, and materials to undertake maintenance activities on an hour-by-hour basis.
• Undertake/review risk assessments and SSOW to progress maintenance works, inclusive of dynamic risk assessments.
• Undertake training to enable maintenance activities to be carried out.
• Subject to receiving the appropriate training and subsequent authorisation, issue relevant Permits/Permissions/Certificates of isolations following both ABP's procedures and statutory requirements, ensuring works are undertaken safely.

Skills: Maintenance Execution, Emergency Repairs, Future Planning, Contractor Coordination, CMMS Management, Stakeholder Communication, Resource Organization, Risk Assessment

• Identify safety and ergonomic issues that arise in operation studies
• Internally audit operators and products to verify they meet the requirements stated in the work instructions
• Collect data using Excel, Oracle, and Fracas software to communicate issues to the correct departments
• Serve as area leader for operational MES issues and transaction discipline
• Breakdown operation observations to determine Job Elements (What) and Steps (How) for the current sequence
• Work with operators, team leads, and departmental engineers to determine the best method and sequence for Standardized Work per operation
• Update, organize, and maintain Standardized Work Documents as per changing operational demands
• Identify process waste, tooling issues, and offer ideas and team assistance to increase productivity and throughput, safety, and address ergonomic issues that arise in operation studies

Skills: Safety Analysis, Ergonomic Auditing, Data Collection, MES Leadership, Process Observation, Workflow Optimization, Document Management, Productivity Improvement

• Assemble, wire, and test electro-mechanical sub-assemblies in an efficient and timely manner as per the manufacturing schedule.
• Install sub-assemblies into systems.
• Seek to improve efficiencies in build time while meeting specifications.
• Diligent and accurate in labelling assemblies, cables, and wires.
• Perform activities such as quality inspections and part assessments, and report deficiencies within the manufacturing process.
• Understand and perform builds as per drawings, electrical schematics, and/or Work Instructions. 
• Responsible for maintaining the work environment to 5S standards.
• Ensure day-to-day activities are performed in compliance with the Vanrx Safety Program. 
• Contribute to and foster an environment that encourages, supports, and recognizes new ideas and initiatives. 
• Engage in continuous improvement initiatives, such as helping to implement new processes, equipment, etc. 
• Use electrical and mechanical assembly hand tools to build, wire, terminate, label, and test components. 
• Support other departments such as Engineering, MET, etc. 
• Communicate with all team members positively and respectfully.

Skills: Electro-Mechanical Assembly, Sub-Assembly Installation, Efficiency Improvement, Accurate Labeling, Quality Inspection, Schematic Interpretation, 5S Maintenance, Safety Compliance

• Understand professional engineering concepts.
• Gather and document test fixture requirements.
• Work with the Engineering Manager or project technical leads to set project goals, including performance, scheduling, and costing.
• Establish and maintain design documentation for test fixtures.
• Participate in design-review meetings.
• Implement solutions that meet stated goals.
• Troubleshoot printed circuit boards for failed components.
• Develop solutions for routine problems of limited to moderate scope.
• Grow knowledge of tools and techniques through literature, training, and research (professional development).
• Receive detailed work instructions on new projects and contribute to the team to meet project objectives.

Skills: Engineering Concepts, Requirements Gathering, Project Goal Setting, Design Documentation, Design Review, Solution Implementation, PCB Troubleshooting, Professional Development

• Inspect the performance of electrical equipment for hazards, adjustments, or replacement
• Read blueprints to determine how to best install the components and wiring
• Recommend electrical system additions or modifications
• Inspect the facility to ensure compliance with standards and regulations
• Ensure proper care in the use and maintenance of equipment and supplies
• Promote continuous improvement of workplace safety and environmental practices
• Document the results of the facility inspections

Skills: Equipment Inspection, Blueprint Reading, System Recommendations, Compliance Inspection, Equipment Maintenance, Safety Improvement, Environmental Practices, Inspection Documentation

• Installation, commissioning, and maintenance of electrical installations, machinery and equipment
• Construction of control cabinets
• Preparation of simple electrical circuits for projects/services
• Service of spare parts for projects
• Operation of machinery, equipment and electrical installations
• Active participation in the commissioning of installations in the country and abroad

Skills: Electrical Installation, Equipment Commissioning, Maintenance Services, Control Cabinet Construction, Circuit Preparation, Spare Parts Service, Machinery Operation, International Commissioning

• Manage and execute changes to the instrumentation at the facility.
• Write and execute testing procedures for plant instrumentation.
• Develop and perform the training of electricians and instrumentation technicians on relevant equipment, systems, and troubleshooting methods.
• Identify root causes of electrical, automation, and instrumentation failures and implement solutions to prevent the recurrence of issues.
• Call supporting operations by providing remote or on-site troubleshooting and making decisions on how to bring equipment back online.

Skills: Instrumentation Management, Test Procedure Writing, Training Development, Troubleshooting Methods, Root Cause Analysis, Solution Implementation, Remote Support, On-Site Support

• Troubleshoot, repair, and maintain new and existing manufacturing tooling and equipment.
• Assist manufacturing engineering/personnel in troubleshooting manufacturing process problems.
• Read and understand mechanical/electrical schematics.
• Complete entries in Preventive Maintenance Logs and the CMMS program
• Maintain spare parts inventory for completing timely repairs on all equipment.
• Provide management with periodic reports.

Skills: Tooling Maintenance, Equipment Repair, Process Troubleshooting, Schematic Reading, Preventive Maintenance, CMMS Management, Inventory Control, Report Preparation

• Perform daily Job Safety Assessments (JSAs) for all shop and field work.
• Generation of daily reports and logs for ongoing site work
• Wiring and termination of control panels in the Shop and the field.
• Red line of Electrical drawings for as-builts
• Creation of site conduit routing and installation detail drawings, and parts lists per NEC code requirements
• Calibration, testing, and loop checks for site instrumentation.
• Generation of commissioning and startup reports, including site testing and calibrations
• Participate and/or conduct daily safety briefs while working on-site
• Proactively close all open punch list items about the electrical installation scope as fast as possible.

Skills: Job Safety Assessment, Daily Reporting, Control Panel Wiring, As-Built Drawings, Conduit Design, Instrument Calibration, Commissioning Reports, Safety Briefing

• Conduct engineering tests and detailed experimental testing to collect design data or assist in research work.
• Write and/or modify scripts for automation purposes.
• Troubleshoot equipment and device issues, maintain and solve test equipment problems.
• Follow and update procedures and protocols to ensure the reliability and quality of test results.
• Oversee/Drive data collection and analysis.
• Work closely with development engineers to create design prototypes and models.

Skills: Engineering Testing, Script Automation, Equipment Troubleshooting, Procedure Updating, Quality Assurance, Data Collection, Data Analysis, Prototype Development

• Perform testing and standard calibrations for customer returned units, which require only calibration service using specialized electronic test and calibration equipment.
• Perform unit troubleshooting, circuit testing and troubleshooting, and calibrations for customer returned units which require repair and calibration services using general and specialized electronic test and calibration equipment.
• Perform product verification and validation testing.
• Follow standard inspection, test, troubleshooting, calibration, and measurement processes.
• Complete and maintain associated records of inspections, tests, repairs, and calibrations in both paper and electronic form.
• Monitor and analyze customer repairs to identify common failure mechanisms and communicate with Customer Service, Technical Support Specialist, or Quality Engineer.

Skills: Calibration Testing, Unit Troubleshooting, Circuit Testing, Product Verification, Validation Testing, Process Compliance, Record Maintenance, Failure Analysis

• Ensure accurate documentation and records of all duties as well as a wide range in regard to construction, including installing, inspecting, and/or commissioning of new electrical and electronic equipment key to pipeline operation.
• Keep all drawings up to date to reflect all changes, including as-builts for projects under his/her control.
• Apply excellent interpersonal skills with internal staff, external departments, and customers to ensure that all maintenance and repair of electrical equipment is carried out safely and efficiently.
• Ensure the operation of the pipeline continues as required by Control Center Operations, including providing on-call services for after-hours requests in order to repair failed equipment.
• By possessing a thorough knowledge of piping, valve configuration, and procedures for public safety, assume the role of First Responder to all Pipeline, Station and Terminal emergencies and be involved in all phases of response, including securing the site, containment and clean-up, as well as technical on-call to provide 7 day X 24 hr coverage.
• Maintain Company tools and equipment, as well as the assigned on-call vehicle, in safe working condition.
• Exercise and possess excellent safety standards in daily work, including safe driving, attending safety meetings, participating in annual Emergency Response exercises and safety training, and following all Company policies and procedures.
• Comply with the guidelines and procedures set out in the various Company manuals.
• Supervise contract personnel champion and visibly demonstrate commitment to the company values of Safety, Integrity, and Respect, with emphasis on safety culture and operational discipline

Skills: Accurate Documentation, Equipment Installation, Drawing Management, Interpersonal Skills, On-Call Support, Emergency Response, Tool Maintenance, Safety Compliance

• Related experience from a manufacturing environment
• Ability to install and troubleshoot control circuits and communication systems
• Thorough knowledge of mechanical power transmission equipment
• Ability to read electrical and mechanical drawings
• Working knowledge of compressor systems and HVAC
• Familiarity with all HMI systems in the facility, with the ability to troubleshoot.
• Ability to install and troubleshoot control circuits and communication systems
• 3 Phase voltage experience, if having 1 phase voltage, working with at least 480
• Proficient with hand and power tools (must provide their hand tools to perform the job duties)
• Ability to move materials and equipment weighing up to 50 lbs

Qualifications: BS in Industrial Electronics with 2 years of Experience

• Experience working as an MEP technician (mechanical and electrical).
• Experience from the repair and maintenance or technical services industry
• In-depth knowledge of electrical, Copper, and Fiber.
• Good understanding of general maintenance procedures and techniques.
• Physically capable and has good physical stamina.
• Good written and communication skills.
• Experience in Pulling Cables and installing CCTV.

Qualifications: BS in Instrumentation and Control Engineering with 4 years of Experience

• Experience in electrical assembly, preferably in panel building
• PLC programming experience, design talent, and technical support experience
• Experience fabricating parts and/or structures according to specifications
• Experience with assembly tools and equipment
• Must have experience with soldering and/or micro-welding equipment
• Excellent communication skills and the ability to work well in teams
• Experience assembling electrical and/or electronic systems
• Experience installing electrical components, units, sub-assemblies, wiring, and casings
• Skill in reading and interpreting blueprints, schematic drawings, and diagrams to determine assembly instructions and material requirements
• Skilled in explaining assembly procedures or techniques to others

Qualifications: BS in Electronics Engineering Technology with 5 years of Experience

• Related experience in the oil field.
• Must be able to take a lead role in planning and setting up job plans in major maintenance projects.
• Must be PC literate.
• Experience is always ongoing in the field as an instrument and electrical technician.
• Experience in Distributive Control Systems, PLC Control Systems, Hardware and Software Control Systems.
• Experience in Instrumentation/Electrical/Pneumatic, and Automation Control Systems.
• Knowledge of running stainless steel tubing.
• Able to read and understand electrical drawings, wiring diagrams, schematics, and P&IDs.
• An ability to interface with County (APCD) inspectors.
• H2S Training/CPR Training/Hazmat training/Emergency response.
• Training in Fisher Rosemount Systems/Allen Bradley PLC Control systems, Honeywell, Modicon, and Siemens PLC controls.
• Training in Turbine and compressor control systems.
• Understanding of power generation and distribution systems.

Qualifications: BS in Power Engineering with 9 years of Experience

• Previous experience as an Industrial Electrician in wiring capital equipment.
• Certificate program or advanced training in electrical
• A positive team spirit in daily activities.
• Exhibits zero tolerance for repeated errors and quality of work.
• Ability to present technical information positively and understandably.
• A professional demeanor, especially when on-site with customers.
• Must strive for continuous improvement and excellence, both technically and in service.
• Self-starter and the ability to be resourceful, work independently, and recognize when higher intervention is needed.
• Must be able to read/interpret blueprints and schematics.
• Continuous improvement in skill set.
• Must be able to work overtime 

Qualifications: BS in Renewable Energy Engineering with 2 years of Experience

• Ability to read and interpret blueprints and schematics
• Strong understanding of industrial and electrical safe work practices
• Strong organizational skills, including the ability to handle multiple demands and assignments in parallel
• Self-motivated and driven individual desiring to make an immediate impact
• Ability to prioritize tasks effectively and efficiently
• Demonstrated ability to perform root cause analysis and strategically eliminate barriers
• Ability to identify waste and drive it out of complex processes
• Effective communication skills and the ability to work with cross-functional teams
• Must be available for daily and weekend overtime, as well as work any shift.

Qualifications: BS in Mechatronics Engineering with 1 year of Experience

• Manufacturing industry, electrical and electronics experience
• Mechanically inclined, familiar with hand tools
• Heavy industrial manufacturing experience in a high-speed operation working with hydraulic and pneumatic-driven equipment.
• Able to independently program, troubleshoot repair PLCs and VFDs and create new programs.
• Proficiency with specific PLC systems, including Siemens, Allen-Bradley, Rockwell, etc.

Qualifications: BS in Electrical Engineering with 3 years of Experience

• Experience working in a maintenance environment post-apprenticeship.
• Experience in carrying out maintenance on electrical systems.
• Ability to meet tight deadlines and work well under pressure.
• Forward thinking with the ability to anticipate problems.
• Good communication skills.
• Self-motivated and a good team worker.
• Extensive experience working in a high-profile environment, such as a music venue or sporting facility, with an ambition to learn and develop.
• Previously undertaken the roles and responsibilities of an authorised person (AP) in LV and or HV installations.

Qualifications: BS in Electronics Engineering Technology with 4 years of Experience

• Related work experience in mechanical maintenance and/or a similar role.
• Prior experience with assembling machinery.
• Excellent knowledge of HVAC (heating, ventilation, and air conditioning) systems/functions.
• Excellent electrical, plumbing, general maintenance, troubleshooting/repair skills.
• Knowledge of Microsoft Office Programs (i.e., Word, Excel, Outlook, etc.).
• Ability to drive a light truck, lift a minimum of 75 lbs., and work from rooftops 30 feet or higher.
• Must own a set of standard hand tools, be able to work in a cold environment, and be available to perform on-site job evaluations.
• Must be able to see color to discern color-coded wiring.
• Prolonged periods of standing, kneeling, bending, and climbing ladders or scaffolding.
• Must be physically capable of pulling wires and cables through conduits.

Qualifications: BS in Automation Engineering with 6 years of Experience

• Working experience in a power plant or heavy industry as an Electrician or electrical engineer
• Knowledge, skills, and experience in electrical safety and EHHS policies and procedures
• Knowledge in using electrical test and measuring equipment and devices
• Knowledge and skills in equipment monitoring devices (Partial Discharge (PD), Dissolved Gas Analyzer (DGA), Vibration, thermography, Drone…)
• Able to read and interpret electrical diagrams, termination drawings, manuals, and specifications sheets.
• Knowledge and skills in maintenance, installation, troubleshooting, root cause analysis, and testing of electrical systems and equipment
• Knowledge and skills in handling heavy equipment
• Team player, self-motivated, strong planning and communication skills with results-driven
• Basic knowledge of Microsoft Office software or the willingness to learn.
• Must be able to work independently with no or limited supervision.
• A basic understanding of a CMMS system and SAP ERP program.
• Capable of functioning and contributing as a plant and area team member.

Qualifications: BS in Electrical Technology with 5 years of Experience

• Readiness and understanding of electrical pull sheets and wiring diagrams.
• Working knowledge of electrical concepts, processes, and theories of 120VAC and 12VDC.
• 12VDC experience with relays, switches, and contractors
• Experience with any modules and parasitic load tests
• Knowledge of machines and tools, including their design, uses, repair, and maintenance.
• Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
• Knowledge of design techniques, tools, and principles involved in the production of precision technical plans, blueprints, drawings, and models.
• Knowledge of principles and methods for training, teaching, and instructing individuals or groups, and the measurement of the training effects.

Qualifications: BS in Electrical and Electronics Engineering with 3 years of Experience

• Knowledge of AC/DC circuits, DC equipment and controls, single-phase motors, three-phase systems, electrical troubleshooting, power supplies, and PLCs.
• Working knowledge of panelview and HMI
• Programming knowledge for PLCs.
• Working knowledge of motor starters, relays, input/output modules, variable speed drives, DC servo motor/encoders, AC servo systems, and controls
• Knowledge of micro switches, photoelectric sensors, proximity sensors, lasers, and vision system contrast sensing.
• Knowledge of machine vision systems
• Experience with Banner, Cognex, and/or Fanuc systems.
• An ability to practice and follow all required safety regulations.

Qualifications: BS in Manufacturing Engineering with 4 years of Experience

• NCCER (National Center for Construction Education and Research) Certification
• Journeyman Electrician
• Ability to research and suggest outside-the-box systematic improvements
• Ability to track and follow up on work requests and work orders in SAP.
• Ability to train less senior instrument or electrical associates working in the field at this work location.
• Experience with SIS (Safety Instrument Systems) systems.
• Experience with PSM (Process Safety Management).
• A good team player

Qualifications: BS in Electromechanical Engineering with 3 years of Experience

• Experience with automated assembly production lines
• Experience with ABB robots
• Experience with vision systems
• Experience working with Omron PLCs
• Strong problem-solving skills
• Ability to work with staff at differing levels of the organisation.
• Ability to assess and upgrade procedures and systems.
• A team player with strong communication skills

Qualifications: BS in Applied Physics (Electronics) with 2 years of Experience

• Experience with installing, troubleshooting, and maintaining industrial equipment
• PLC troubleshooting experience
• Ability to interpret Electrical and Mechanical Drawings
• Working experience in Motion Control
• Robot programming/troubleshooting experience
• Experience working with Machine Vision 
• Experience with Electrical, Pneumatic, and Hydraulic Systems

Qualifications: BS in Electrical Engineering with 3 years of Experience

• Pipeline electrical maintenance experience.
• Must be a Journeyman, or Journeyman Class Electrician, qualified to work on 13,200 volt and below, substation and switchgear equipment.
• General familiarity with Programmable Logic Controllers (PLCs), ladder logic, electrical control circuitry (including large motor control), VFD circuitry, protective relays, and similar equipment.
• Ability to assist in the preparation of work scope for maintenance issues and construction projects.
• Able to provide field expertise in electrical equipment specification, equipment repairs (including inspection of vendor/contractor work), and equipment selection in construction and maintenance.
• Able to use and operate all pertinent safety equipment when performing duties in potentially hazardous areas (respirator, hard hat, safety glasses, etc.).
• Computer literate with basic skills in MS Windows, Word, Excel, email, and Internet usage.
• Must be able to work alone and outdoors in extreme weather and safely perform heavy physical labor.

Qualifications: BS in Electronics Engineering Technology with 5 years of Experience

• Electrical experience in building and wiring electrical panels
• Hold electrical certifications
• Self-motivated individual with a positive attitude
• An ability to finish assigned tasks accurately and on time
• Effective organizational skills with a commitment to deadlines
• Effective verbal and written communication skills
• Willingness and ability to learn and teach others

Qualifications: BS in Renewable Energy Engineering with 2 years of Experience

• Strong practical hands-on electrical aptitude (All positions require time on the floor working on equipment.)
• Experience in electro-mechanical troubleshooting, proficient with pneumatic and electrical schematics
• Motion control knowledge, including servo, stepper, DC, and AC drives
• PLC programming experience
• Process variable understanding of flow, temperature, rate, pressure, and level.
• Thorough understanding of current loops.
• Serial communication knowledge, including RS232/485, Ethernet, IEEE-488
• Machine control knowledge and understands classical control theory
• Basic mechanical aptitude.

Qualifications: BS in Electronics Engineering Technology with 4 years of Experience

• Progressively responsible, on-site experience in electrical/electronic assembly
• Able to interpret complex electrical schematics.
• Above-average skills in soldering and electrical assembly.
• Electrical/electronic assembly/inspection and/or soldering certificate (IPC-WHMA-620, IPC J-STD, etc.)
• Experience with cable assembly/wire harness assembly.
• Experience with fiber optic cable assembly, troubleshooting, and repair.
• Good communication skills and the ability to work as a team player in a fast-paced environment.
• Able to work with minimum supervision under a variety of conditions.
• Experience with PWB/PCB assembly, including through-hole and surface mount
• Experience with battery charging systems
• Experience with Deep Submergence Systems - Scope of Certification (DSS-SOC)
• Experience troubleshooting at the component level
• Knowledge of shipboard wiring and/or subsea systems (ROVs/AUVs)

Qualifications: BS in Electrical and Electronics Engineering with 8 years of Experience

• Good mechanical aptitude.
• Ability to discern assorted colors.
• Ability to communicate orally and in written reports, condition of equipment and status of jobs to the crew leader, supervision, operations, and other craft personnel, and outside service representatives.
• Knowledge of electricity, voltage, and current relationships.
• Knowledge of Federal, State, and Company environmental guidelines
• Knowledge of maintenance activities and procedures performed on control systems used in power generation.
• Ability to read and interpret instruction manuals, blueprints and control system drawings, applies knowledge to daily tasks.
• Ability to learn mechanical and electrical control equipment and basic power plant equipment operation.
• Ability to use mathematics, including algebra and geometry, to take measurements and perform computations for the installation and calibration of equipment
• Ability to troubleshoot and repair pneumatic, electronic and digital controllers used in control loops.
• Ability to calibrate and perform maintenance on temperature, level, and pressure instruments and transmitters.
• Ability to Tag Out/Lock Out equipment per NRG's Tag Out/Lock Out procedure, and ability to use a personal computer and associated software.
• Ability to operate Company vehicles and equipment (e.g., forklift, plant vehicles, etc.) and maintain operating licenses and certifications, TDL
• Ability to influence others toward action or a particular point of view, and the ability to accept responsibility for crew activities.
• Ability to apply knowledge of plant operations, equipment, and skill area knowledge to daily decision making.
• Ability to complete all written and electronic records to document work in progress and completed.
• Proficient in PC-based analytical software

Qualifications: BS in Electrical Technology with 7 years of Experience