• Understands and strictly follows the Company’s Rules, Regulations, Policies, Instructions, and Procedures to avoid unnecessary conflicts and to reach expected behavior and job performance.
• Have awareness of ISO 9001 & ISO14001 & OHSAS18001 quality systems.
• Support and report to the manager, cooperate with related project team members to achieve engineering targets in the delivery project. 
• Support to internal customers and continuously improve customer’s satisfaction
• Engage in the development of hi-tech products as mentioned in this JD.
• Finish engineering material according to valid rules and standards before the time stamp of the engineering schedule and report to the designated project leader for audit
• Follow and control design progress, timely report design progress status to designated project leader
• Check engineering material integrity and correctness, contact the designated project leader, and follow up on the question if found
• According to the requirement of the design task, ensure every project information be handout to the corresponding department on time, including support to internal or external workshop
• Supporting site work during installation, commissioning, and start-up for needed engineering solutions.
• Continuously improve design quality required by quality target and customer feedback listed in the quality system
• Ensure that 5S & LSS in own area are implemented

Skills: Policy Compliance, Quality System Awareness, Project Support, Customer Satisfaction, Design Progress Monitoring, Material Integrity Check, Site Support, Design Quality Improvement.

• Helped lead the design and development of world-class FPGA DDR PHY circuits.
• Functional specifications, RTL models, circuit design, and system timing closure.
• Have architecture study and design trade-off analysis to align with product requirements and roadmap
• Be responsible for deliverables to the SW group for SW/HW integration
• Work in close collaboration with the physical design teams.
• Be responsible for timing constraints, DDR system timing closure, IP timing deliveries, and IR drop analysis at the block level
• Write/maintain design documentation.
• Have a good understanding of technical standards and specifications such as DDR, LPDDR, etc.
• Work with back-end and layout engineers on macro-and chip-level floor-planning, power planning, macro and standard cell placement, in-place optimization, design rule checks, and post-layout timing analysis.
• Conduct test plans to identify functional problems and performance issues with the silicon during the chip evaluation process and capable of bring-up  and characterization 
• Support to internal customers and continuously improve customer’s satisfaction
• Makes technical calculations of parts or machines based on standards

Skills: Power Planning, RTL Modeling, Architecture Analysis, SW/HW Integration, Timing Closure, Design Documentation, Chip Evaluation, Technical Support.

• Actively contributes to the standardization of the product group and makes basic designs of the product platform
• Works out design guidelines and calculation tools and transforms them into Design Manuals
• Enable an unambiguous and efficient detail engineering for customer orders
• Shared responsibility at the module level for the mechanical, pneumatic, and hydraulic machine design in close consultation with the lead design engineer.
• Works out conceptual ideas for product development and innovation into basic designs
• Specifies standard or project-specific parts and releases them according to existing procedures
• Maintains the design during the project according to the existing procedures
• Provides input for cost calculations and comparisons of parts or machines
• Consult with suppliers regarding the implementation and specifications of the part to be designed or purchased
• Collecting, recording, and transferring the acquired professional knowledge to employees within the organization and to external parties.
• Supports the lead design engineer in maintaining the product platform concerning specifications, manufacturability, standardization options, and compliance as well as possibilities to automate design processes in order to work more effectively
• Conducting or supervising field tests of developed product or product improvement
• Supports failure analysis and root cause analysis as part of 3rd-line support to the operational organization.

Skills: Product Standardization, Design Guidelines Creation, Detail Engineering, Mechanical/Pneumatic/Hydraulic Design, Concept Development, Supplier Consultation, Cost Analysis, Failure Analysis.

• Working alongside RDD teams to produce exciting and disruptive products on specification, cost, and time.
• Develop innovative & novel mechanical concepts with high-value Intellectual property.
• Collaborate with power systems and electronic teams to integrate motor, sensor, and heater systems into cutting-edge technologies.
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.
• Assessing technical risk, defining development plans, and reporting against project delivery.
• Ownership of design, build and testing of prototypes to demonstrate technologies, features and performance.
• Create and perform investigative verification and validation tests throughout all development phases.
• Influence technology and product development roadmaps through strategic supplier relationships.
• Communicate and influence across all disciplines and levels.
• Challenge and develop Dyson engineering practices to continuously improve design quality.
• Maintain records pertinent to each project in the form of time, sketches, drawings, and material specifications.
• Keep well informed on new developments in research and design engineering.

Skills: Product Development, Mechanical Concept Innovation, System Integration, Problem Resolution, Risk Assessment, Prototype Development, Verification and Validation, Cross-Disciplinary Communication.

• Design engine components and systems (3D models, drawings, feasibility studies) and produce technical specifications.
• Implementing Design for Manufacturing, Assembly & Service concepts
• Ensuring that design is cost-efficient and assembly/maintenance optimized
• Ensuring benchmarking of alternative design solutions
• Participate in development of new design solutions together with other R&D Engineers
• Participate in product care activities, give technical support to other departments
• Design and develop high-quality, innovative machine software features for a diverse Excavator product line.
• Develop software requirements, and create designs & documentation in compliance with safety-regulated software development processes (ISO19014).
• Develop, integrate, and validate software for EXD’s primary platform using requirements management tools (DevOps), implementation languages (C, MATLAB/Simulink), and automation tooling (Python).
• Implement and maintain a continuous integration pipeline.
• Learn about all aspects of machine software application development and use this knowledge to develop code generation tools to automate the repetitive aspects of development

Skills: Engine Component Design, Design for Manufacturing, Cost Optimization, Benchmarking Solutions, Product Development, Technical Support, Software Development, Safety Compliance.

• Experience in Design, Construction, Architecture, or Topography
• Experience in a similar process and building layout design and development role, in an industrial, logistics, distribution, fulfillment, or production/manufacturing environment
• MBA or Master's in Engineering, Logistics, Supply Chain, or Transportation
• Experience in designing, implementing, and launching fulfillment, delivery, and sortation centers
• Knowledge with Simulation or 3D modeling
• Experience in collaborating with design engineering, construction, real estate managers, and execution project managers
• Experience working as a Design Engineer or Senior Design Engineer for physical infrastructure designs
• Knowledge of delivering successful Fulfillment, Distribution, Warehouse, or Delivery station designs
• Experience in design engineering and drafting tools such as AutoCAD, Bluebeam, MS Visio, Solidworks, etc.
• Process Engineering skills and Project Management skills
• Experience in building relationships with business partners and key stakeholders, and experience in working under pressure in a cross-functional organization
• Experience in Lean Management, Six Sigma, and other OE tools
• Knowledge of Excel, including the use of look-ups and pivot tables
• Experience working in a fast-paced and rapidly changing environment
• Knowledge to organize and manage multiple tasks simultaneously

Qualifications: BS in Electrical Engineering with 6 years of Experience 

• Excellent analytical skills and understanding of complex engineering concepts and applications.
• Self-starter with strong technical skills
• Ability to communicate technical information effectively with team members and others in the workgroup, as well in other units, customers, and suppliers
• Project experience in NTI (New Technology Introduction), NPI (New Product Introduction), or CPI (Current Product Improvement)
• Experience in Battery Systems or other electric drivetrain components such as motors, power electronics, etc.
• Experience in electronic component design, selection, or integration
• Experience in flexible and/or rigid printed circuit board schematic and layout
• Knowledge of drivetrain systems for a range of architectures (hybrid, BEV, etc.)
• Worked with leading-edge technologies 7 nm+
• Experience in developing high-speed CMOS designs
• Knowledge of the ARM architecture and design tools
• Design knowledge of the industry standard bus interfaces such as AMBA AXI protocol
• Experience with chip design quality through design and checklist reviews
• Good communication and self-motivated that can collaborate with larger teams within Microsoft

Qualifications: BS in Computer Engineering with 5 years of Experience 

• Experience designing, developing, implementing, and verifying signal processing algorithms targeting FPGA-based development platforms
• Experience with behavioral, register transfer level (RTL), and gate-level development
• Experience with Hardware Description Language (HDL), including Verilog or VHDL
• Experience developing DSP algorithms, including channel emulation, waveform generation, phased array processing, for real-time applications
• Experience with Linux operating systems, ability to obtain a security clearance
• Experience applying Xilinx ISE and Vivado workflow
• Knowledge of digital communication theory, including modulation, demodulation, radio-frequency principles
• Knowledge of digital signal processing (DSP) theory, including sampling theory, filter design, fixed-point design considerations
• Experience utilizing radio-frequency (RF) daughter cards
• Experience developing integrated solutions that leverage both the embedded processor and FPGA fabric of Xilinx SoC/RFSoC devices
• Knowledge of non-traditional HDL development, including SpinalHDL, and Chisel
• Possession of excellent oral and written communication skills

Qualifications: BS in Systems Engineering with 7 years of Experience 

• Direct experience in designing and bringing into mass production ZIF RF transceivers in deep sub-micron RFCMOS technology.
• Deep understanding of analog, mixed-signal and RF circuit design.
• Experience should also include an understanding of DFT and DFM techniques for mass production environments.
• Deep understanding of analog design concepts such as analysis of noise, linearity, mismatch, stability and other analog impairments.
• Deep understanding of CMOS device physics, RF device modeling, device noise parameters, and inductor modeling.
• Familiarity with various RF transceiver architectures and their trade-offs, system specifications 
• Ability to work with system architects to translate system requirements into circuit requirements at IC level
• Familiarity with the integration flows and challenges of wireless SoCs.
• Familiarity with mixed-signal mode verification methodology (SystemVerilog, AMS, Nanotime).
• Strong knowledge of disease and ability to work closely with board RF/HW/Antenna teams to optimize board/module layouts for disease mitigation.
• Experience with defense mitigation with integrated PMUs/DSPs (i.e. substrate isolation, return loops, package isolation, frequency planning, etc).
• Familiarity with Cadence Virtuoso, Spectre RF, Matlab, EM simulation (EMX, HFSS), and similar tools.
• Extensive experience in Si characterization and debugging.
• Ability to drive strong production test/QA methodologies.
• Extensive experience in IP sourcing and management.

Qualifications: BS in Computer Engineering with 6 years of Experience 

• IRSE Engineering Manager’s license or a combination of Principles Design and Design Verifier licenses
• Established professional status within the signaling industry, with experience in engineering implementation of signaling schemes
• Be able to influence and develop an existing safety culture to latest generation thinking and practice, for both technical and operational safety 
• Supportive of a consistent company-wide approach to continuous improvement
• Strong leadership qualities including personal drive, persuasive communication skills, enthusiasm, and support for company goals
• A broad base of engineering skills, experiences, knowledge, and competencies covering the full engineering lifecycle, together with the requisite personal characteristics to take responsibility for facilitating cross disciplinary engineering activity in complex, innovative and commercially challenging environments
• Previous experience in systems engineering, project engineering, and design of safety-critical or safety-related real-time systems, test, and installation environments
• Strong and effective communicator at all levels within the business – and in front of new and existing customers,  both internal and external
• Demonstrates an ability to work in an environment where calculated risk-taking
• Must be willing to fill gaps in own knowledge and experience through taking a pro-active approach to learning, and seeking information from within and outside the company
• Commercially aware be able to forecast and manage resource utilization and costs.
• Have passed four modules in the IRSE Professional Examinations
• Capability to work and lead in collaboration with other non-collocated teams.
• Strong analytical skills.

Qualifications: BS in Mechanical Engineering with 9 years of Experience