• Responsible for monitoring critical control points (CCP), food safety and quality throughout the manufacturing process.
• Ensure the correct specification for products is met during processing.
• Responsible for collecting product samples for microbiology and chemistry testing.
• Record and action non-conformance and corrective actions.
• Investigate and highlight non-conformances to the QC Team Leader or Supervisor.
• Keep measurement equipment operating by following operating instructions, weekly calibration and calling for repairs.
• Complete scheduled audits, including GMP, Glass and hard plastics and walk away standards.
• Complete paperwork in an accurate and timely manner.
• Update job knowledge by participating in educational opportunities.

Skills: CCP Monitoring, Food Safety, QC Testing, Sample Collection, Issue Resolution, Equipment Calibration, GMP Auditing, Accurate Documentation

• Responsible for quality control inspections of in-process and finished products.
• Read engineering schematics and compare them with the finished product.
• Perform tests to ensure that the products produced meet quality standards.
• Assist with first article inspection reports.
• Responsible for identifying and raising quality issues and ensuring prompt action is taken to resolve them to ensure zero impact on the customer.
• Work in a team environment to develop and implement best practices that emphasise defect prevention, reduction in variation and waste.
• Observe the methods and equipment production employees use during manufacture and advise on best practice.
• Advise the management team so they are aware of any defects in the product.
• Share technical knowledge about the product with relevant staff.
• Work with relevant personnel to resolve quality issues that arise as quickly and efficiently to prevent compromising quality and safety standards.
• Carry out product and process inspections.
• Stop production in the event of the manufacture of unacceptable goods/processes.
• Ensure compliance and assist with adherence to the Quality Management System.
• Assist with the training of quality awareness, e.g., communicating ‘One Point Lessons’.
• Contribute to continuous improvement activities.

Skills: Quality Inspection, Schematic Review, Product Testing, Issue Escalation, Process Observation, Defect Reporting, QMS Compliance, Continuous Improvement

• Carry out spot checks on every process.
• Record readings and discuss all non-conformances with the manager.
• Carry out chemical analysis tests as per work instructions.
• Ensure all staff are trained on the jobs they perform.
• Ensure new starters are trained on the jobs they are going to be assigned.
• Prepare a plan for re-training all staff.
• Select one Process each week and review to make sure the process is up to date.
• Recommend any improvements to reduce tack time, safe working practice, etc.
• Ensure all monthly reports are up to date.
• Carry out annual internal audits.
• Comply with internal QMS and ISO standards.
• Ensure housekeeping is up to standards at all times.
• Effectively plan and organise own time to maximise productivity and efficiency.
• Fully conversant with the systems required to operate as part of the role and to use systems in line with the business's operating policies and procedures.

Skills: Process Spot Checks, Non-Conformance Review, Chemical Testing, Staff Training, Retraining Planning, Process Review, Improvement Recommendations, QMS Compliance

• Perform a wide range of QC activities and functions throughout the manufacturing process, and in different areas of the factory, including the routine inspection and verification of products according to procedure, against specification and to quality standards.
• Responsible for including (not exhaustive) internal audits, organoleptic testing and swabbing.
• Conduct product inspections off-site.
• Accurately record data relating to product conformity and in a timely manner.
• Accountable for general administrative tasks for the department, including filing and archiving records.
• Bring to the attention of management any issue that could compromise food safety, quality, or legality.
• Report any Health and Safety hazards within working areas.
• Ensure damaged equipment is not used and any defects are reported to engineers immediately.
• Fully cooperate with site management and the workforce.
• Work in order to meet changing business requirements.
• Carry out all duties by managerial or supervisory staff to ensure the smooth and efficient running of the factory.
• Comply with Health and Safety rules at all times.
• Comply with company policies, practices and standard operating procedures.

Skills: QC Activities, Product Inspection, Internal Audits, Data Recording, Admin Support, Issue Reporting, Safety Compliance, SOP Adherence

• Work areas include packing lines to Vase life testing.
• Reject raw material flower stems, and pack SKUS not meeting specifications.
• Increase and maintain the quality of products, using internal data systems.
• Liaise with teams across the business to resolve any quality issues.
• Fully record findings with supporting evidence.
• Ensure reporting is consistent.
• Review specifications and packing plans to ensure they are accurate and fit for purpose.
• Fully document production procedures, generate SOPs in areas of intake and production for team members.
• Implement and oversee these new procedures.
• Propose improvements to the production team on quality control measures to improve product excellence.
• Use predetermined checks will assess and monitor the quality of bouquets produced against specifications and highlight any issues to team members.

Skills: Quality Checks, Material Rejection, Data Monitoring, Cross-Team Liaising, Evidence Recording, Spec Review, SOP Creation, QC Improvements

• Perform routine online and finished food products inspection at various stages on the production line to implement the ISO/HACCP policy.
• Responsible for quality control of raw materials and packaging materials.
• Assist in implementing and maintaining the documentation system and quality management system.
• Support the implementation of food safety, hygiene and quality assurance operation policies, guidelines and procedures to ensure the entire production process is in compliance with the corporate standard.
• Coordinate and participate in work safety, quality assurance and hygiene procedures training for related staff.
• Execute the ad-hoc job tasks assigned by the supervisor.

Skills: Product Inspection, Material QC, QMS Support, Food Safety Compliance, Hygiene Oversight, Staff Training, Policy Implementation, Ad-Hoc Tasks

• Control over post-production documentation.
• Responsible for in-production tests.
• Release ready products based on post-production documentation.
• Responsible for product inspection.
• Work in the AXAPTA system, releasing of ready product.
• Control over environmental parameters and supervision under the cleaning procedure for production areas.
• Perform monitoring results trend analysis.
• Supervise and cooperate with NCR and complaints.
• Supervise manufacturing instructions, checking for updates to new versions.
• Initiate meetings with employees about the quality of their work.
• Perform initial training for new employees.
• Perform incoming inspection based on ISF (RSOL DC Quality controllers).
• Release country-specific labeling (RSOL DC Quality controllers).

Skills: Documentation Control, In-Process Testing, Product Release, Product Inspection, System Operation, Environment Monitoring, NCR Management, Staff Training

• Responsible for ensuring the company's QMS, GMP, policies, procedures are implemented as daily working practice throughout the manufacturing process from goods in to the dispatch of finished goods to produce right first time, safe and legal products conforming to agreed specifications.
• Check that manufacturing documents are issued correctly to the production teams.
• Accountable for line start-up and clearance checks and approvals.
• Monitor in-process checks during production are carried out.
• Review finished products and palletized goods to specification.
• Advise the production operative on in-process adjustments.
• Carry out equipment calibrations, glass and plastics and hygiene checks.
• Support with continuous improvement of the Quality Management System.
• Support the production team with Operative training.
• Support during customers' visits and accreditation audits.

Skills: QMS Compliance, Document Control, Line Approval, In-Process Monitoring, Product Review, Equipment Calibration, Continuous Improvement, Operative Training

• Ensure the new developments are built to the agreed specification and quality in line with Anchor Hanover’s Design Standards and strategic development plan.
• Ensure that quality is checked at pre-determined stages of the programme, in order to monitor agreed quality standards and progress on site.
• Work alongside the Construction Delivery manager to ensure quality is checked at suitable points to maintain the programme and to intervene, flagging any potential risks to the relevant Construction Delivery Manager and/or Head of Development Delivery.
• Adhere to Anchor Hanover’s governance requirements in relation to decisions on new developments, making representations.
• Represent and promote the organisation confidently and knowledgeably at every opportunity and demonstrate interest in the Development Plan and the wider organisation.

Skills: Specification Compliance, Stage Inspection, Risk Flagging, Governance Adherence, Quality Monitoring, Progress Review, Stakeholder Liaising, Organisation Representation

• Confirm parts are identified and traceable to certification.
• Carry out Quality Control inspections before, during and after welding.
• Carry out fabrication workmanship inspections and audits.
• Ensure standards required to be achieved during fabrication/construction are met.
• Raise NDT Requests and coordinate NDT activities.
• Support other inspections (Dimensions, Paint, Protection, etc.)
• Coordinate customer inspections and acceptance events.
• Maintain accurate records of all inspections performed.
• Update the completions system.
• Produce and distribute Non-Conformance reports and verify their closure.
• Support the implementation of necessary corrective and preventive actions to remedy any non-compliance found and to avoid recurrence.
• Support the delivery of a continual improvement process across the business.

Skills: Parts Traceability, Welding Inspection, Fabrication Audits, Standards Compliance, NDT Coordination, Customer Inspections, Record Keeping, Continuous Improvement

• Process transportation documents (CMR) in the internal system, according to legal and customs standards, as per/internal procedures.
• Assure that all the information regarding the transportation is correct and reviewed according to the deadlines.
• Provide the requested documents available to the competent authorities in case of an external audit.
• Prepare and disseminate quality indicators regarding the activity.
• Challenge and review archiving flows, ensuring legal compliance.
• Apply internal control rules (archiving, control checks, etc.)
• Manage the continuity of service in perimeter (observing the polyvalence, permanence, formalization and documentation of activities).
• Participate in ad-hoc team projects, as per competencies.

Skills: Document Processing, Data Accuracy, Audit Support, Quality Reporting, Archiving Compliance, Internal Controls, Service Continuity, Project Participation

• Conduct investigations on customer returned products in accordance with site and divisional procedures.
• Proactively support the implementation of new and/or improved processes.
• Communicate in a professional manner with colleagues worldwide.
• Meet division goals for timeliness of complaint investigations and identify opportunities for improvement and/or better efficiencies in investigation processes.
• Conform to all relevant legislation and company Health and Safety policies.
• Pro-active in recommending improvements in terms of recommending cost savings through complaint process improvements and data quality, in line with Business Excellence initiatives.
• Keep up to date with the development of new products and, through collaboration with peers within the complaints team and across the business, support activities required for complaint readiness prior to product launch.
• Identify any trends in product complaints that are found during investigations and highlight these to management.
• Handle multiple tasks effectively and efficiently in a team environment with minimal supervision.

Skills: Complaint Investigation, Process Improvement, Global Communication, Timely Reporting, Safety Compliance, Cost Optimization, Trend Analysis, Team Collaboration

• Release of raw materials, packaging, and products at takeover.
• Sample and send samples of raw materials and finished products for analysis by contractors.
• Sample retention and reference samples and appropriate labeling thereof.
• Validate and verify procedures, reviews of the effectiveness of the implementation of accompanying programs (analyses, reviews).
• Participate in preparing and revising standard operating procedures, instructions for use, specifications, forms, technological processes, analytical methods, validation and stability protocols, reports, etc.
• Approval of the label, outer packaging, and PIL before final use and verification of the suitability of the packaging.
• Control of conformity of input raw materials/materials with specifications and release of raw materials and input materials for production.
• Review and approval of production reports, packing reports and inter-process controls, analytical results.
• Check the conformity of the final product with the specifications and issue analytical reports for the final products.
• Prepare protocols and reports for testing the stability of finished products.
• Ensure the qualification of equipment and premises (plan and review of qualifications).
• Monitor the realization and production or review of annual product quality inspections.
• Control of GMPs by relevant contractors, preparation of contracts, implementation of audits and control and monitoring of qualifications.
• Receipt and research of complaints, preparation of reports and records of complaints.
• Prepare plans for internal audit and support internal audit and preparation of reports.
• Receipt and coordinate deviations, preparing reports and records of deviations, and monitoring the applicable CAPA.
• Accept and coordinate changes, preparing change control reports, and monitoring change-related activities.
• Participate in the implementation of internal audits and the preparation of a plan of corrective and preventive measures concerning internal and external audits.
• Cooperate and support in resolving withdrawals and recalls.
• Monitor legislation in the field of food supplements, monitoring good practices.

Skills: Material Release, Sample Handling, Procedure Validation, SOP Preparation, Packaging Approval, Spec Verification, Audit Support, CAPA Management

• Monitor quality process during development (sampling) and bulk production.
• Check workmanship, visuals, treatment, measures and packaging.
• Organize and implement pre-production meetings, inline inspections and final inspections during production and before shipment.
• Detect quality problems on footwear during production in line, identify the cause, and suggest corrective actions.
• Analyze the feasibility of the style before production and identify critical points.
• Monitor quality improvement plans, quality systems and processes in factories.
• Train factories on company processes and standards.
• Manage suppliers according to quality results.

Skills: Quality Monitoring, Product Inspection, Pre-Production Control, Defect Detection, Style Feasibility, Process Improvement, Factory Training, Supplier Management

• Take charge of a product rack to be processed accordingly to the FIFO and area rules.
• Scan the product ID and read the data sheet.
• Ensure all necessary controls in accordance with the brand's specifications (product value, size, status, etc.) to validate the product data sheet compliance.
• Ensure the product restoration to facilitate the transaction (cleaning, stitching, etc.)
• Make all the necessary comments to the product data sheet to make the transaction reliable and avoid returns.
• Identify the blocking points that could hinder the transaction and make the most appropriate decision for the brand, the seller and the buyer.
• Act as a trusted third party between the buyer and the seller in case of an anomaly.
• Seal the items after each check to certify their passage through the workshop.
• Follow the proper storage of controlled racks accordingly to the FIFO and area rules.
• Alert the line manager in case of doubt or malfunction.
• Store work space at the end of the shift.
• Manage the inventory of the areas he/she is responsible for.
• Responsible for being the link between different brand services (SRM, logistics, Concierge, etc.)

Skills: FIFO Handling, Data Verification, Product Inspection, Restoration Work, Issue Resolution, Decision Making, Anomaly Mediation, Inventory Management

• Develop and implement the QA/QC management system at the site, promoting a safe working environment at all times.
• Develop a Quality Control Plan as part of the Project Execution Plan.
• Monitor the implementation of the approved site Quality Control Plan by the contractors.
• Coordinate quality inspections with the site contractors, sub-contractors and vendors, including coordination of all non-destructive testing on site.
• Coordinate all receipt of goods/materials inspections with contractors.
• Verify material storage areas have been laid out and designed to enable materials to be stored safely and without damage or degradation prior to installation.
• Verify that the quality-related site activities are performed in accordance with the applicable codes and standards.
• Participate in the internal and external site QA/QC audits.
• Control all non-conformance reports and verify that remedial actions have been completed.
• Coordinate the approval of the contractor's QC technical submittals to the client.
• Coordinate with the site construction manager on all quality issues.
• Coordinate and chair the QA/QC site weekly meetings with the project contractor's QA/QC personnel.
• Verify that contractor inspection and test plans (ITPs) meet the expectations of the Project QA/QC requirements and respective scopes of work.
• Assure all technical documents related to site quality control are current status.
• Verify that quality records, acceptance certificates, mechanical completion certificates and the documentation for specific systems and buildings/areas are prepared and collated in accordance with project QA/QC requirements.
• Coordinate with the planning team to ensure milestone dates are understood for each turnover area and are incorporated in the project schedules.
• Provide progress data to the planning team for incorporation in schedule progress updates.
• Coordinate with the commissioning team to define the scope of work for final acceptance and handover.
• Ensure all quality control documentation is compiled and completed for the as-built handover.
• Assist the site contractors with the compilation of turnover dossiers.
• Provide progress information for incorporation into project reports.
• Monitor and control the status of the punch list and exception lists relevant to quality dossiers.

Skills: QA/QC Systems, Quality Planning, Inspection Coordination, Material Verification, Standards Compliance, Audit Support, NCR Management, Documentation Control

• Examine all client and stock repairs.
• Systematically update the information in the system, and enter the item conditions, repair details, and cost estimate in SAP using the proper system codes while ensuring adherence to the lead time established by the brand.
• Ensure all gemstones are matching from the original mounting, natural color, and any physical damage of the stones.
• Ensure Counterfeit or non-original items are reported in the system.
• Examine completed repaired merchandise to verify that the servicing has been completed in accordance with the request.
• Examine manufactured stock merchandise to verify it is in accordance with the brand's quality standards.
• Examine gemstones from the diagnosis report.
• Record quality issues in SAP and notify the applicable department.
• Support with multiple inter-office tasks.
• Participate in the continuous process improvement of the workshop.
• Assign the precious metal bank to technicians.
• Participate in cleaning and maintaining the workshop.

Skills: Repair Inspection, SAP Recording, Gemstone Verification, Counterfeit Reporting, Quality Checking, Issue Logging, Process Support, Workshop Maintenance

• Visually inspect all vehicles in line with the provided job card.
• Highlight quality issues and liaise with the workshop controller to ensure re-work is delivered in a timely manner.
• Accurately complete all quality control documentation to AAR standards.
• Meet bodyshop set targets, eg, 10 vehicles per day.
• Adhere to all BS10125 standards.
• Work with the site’s receptionist to ensure that all vehicles are returned to customers within agreed SLAs.
• Maintain awareness of all Health and Safety requirements and lead by example.

Skills: Vehicle Inspection, Issue Reporting, QC Documentation, Target Achievement, Standards Compliance, SLA Coordination, Safety Awareness, Customer Return Support

• Complete production paperwork, ensuring full traceability is maintained and that products are produced to specification.
• Work closely with the quality and production functions to drive improvement and compliance.
• Manage according to the schedule and production plan.
• Investigate non-conformances.
• Understand colour matchings.
• Responsible for QC testing methods.
• Accountable for viscosity testing.

Skills: Traceability Documentation, Quality Collaboration, Production Planning, Non-Conformance Review, Colour Matching, QC Testing, Viscosity Testing, Specification Compliance

• Assess the product daily on arrival, ensuring the product meets customer specifications.
• Assess stored products prior to outloading and produce reports dependent upon the condition and suitability ensuring non, ensuring non-conformances are rejected.
• Support the Ripening Department.
• Support re-inspections for products in storage based on age, in line with Product Managers' instructions.
• Ensure H&S at the site is adhered to at all times.

Skills: Product Assessment, Spec Verification, Condition Reporting, Non-Conformance Rejection, Ripening Support, Re-Inspection Support, Safety Compliance, Storage Monitoring

• Must have deep-rooted familiarity with current and historical business, media, sport, news, social media and cultural affairs of the US market.
• Must have a robust working knowledge of the internet and social media in the US.
• Demonstrated verbal, written and listening skills, with the ability to provide expertise at all levels of the business and with customers.
• Must have time management and organisation skills.
• Must have a 3rd Level Qualification.
• Strong research skills, with the ability to read and understand complex guidelines, and to apply those guidelines to user behaviour.
• Ability to collaborate both internally and externally within the business.
• Must have strong Microsoft Office skills, especially Excel and PowerPoint.
• Practical experience with SQL.
• Working knowledge of SharePoint, with practical experience of content authoring tools such as Adobe Captivate.
• Experience designing and delivering eLearning content.
• Experience with data analysis to support decision-making.

Qualifications: BA in Business Administration with 4 years of Experience

• Ability to work in a demanding, time-pressured environment with tight deadlines.
• Ability to work independently, resolve problems through proper protocols.
• Ability to multitask and apply standards consistently for each different customer.
• Ability to effectively work within and improve defined processes.
• Good attention to detail.
• General statistical process control knowledge.
• Good communication, proofreading and comprehension skills.

Qualifications: BS in Industrial Engineering with 3 years of Experience

• Excellent communication skills, both verbal and written, with a sharp eye for detail.
• Capable of setting and monitoring the quality packing standard online.
• Must have excellent organisational skills.
• Able to be motivated with the ability to work on own initiative.
• Able to be flexible and adaptable, with the ability to multitask.
• Must be physically fit and prepared to work in a chilled environment.
• Must be computer-literate and a competent user of Microsoft Office.
• Must have GCSE standard qualifications (or equivalent).
• Must have Food Safety in Manufacturing Level 1.
• Basic Health and Safety.
• Fluent in English, both written and verbal.
• Must have languages such as Romanian, Bulgarian, Lithuanian and Russian.

Qualifications: BS in Food Science with 2 years of Experience

• Must be able to read/write English and understand (GMPs), (MIs) and(SOPs).
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
• Ability to write routine reports and correspondence.
• Ability to speak effectively before groups of customers or employees of the organization.
• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
• Ability to deal with problems involving several concrete variables in standardized situations.

Qualifications: BA in Supply Chain Management with 1 year of Experience

• Must be able to perform each essential duty satisfactorily.
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Able to perform job-related part identification.
• Knowledge of inspection equipment and gauges and how they are used.
• Must have computer skills to include basic knowledge of Microsoft Word and Excel.

Qualifications: BA in Management Information Systems with 2 years of Experience

• Able to self-starter.
• Good written and verbal communication skills.
• General knowledge of automobiles.
• Ability to follow verbal and written instructions.
• Ability to use/operate two-way radio and basic hand tools.
• Basic knowledge of MS Office products, Word, Excel (flow charts and process mapping), Outlook, and PowerPoint.

Qualifications: BS in Environmental Science with 1 year of Experience

• Previous work experience in quality control or other related fields.
• Strong attention to detail.
• Strong analytical and critical thinking skills.
• Excellent written and verbal communication skills.
• Experience in the automotive truck industry.

Qualifications: BS in Quality Assurance with 3 years of Experience

• Experience working with one or more of the following American Welding Society (AWS) codes: D1.1, D1.5, D1.8.
• Experience with dimensional inspection.
• Experience conducting and witnessing welding procedure qualification and welder qualifications.
• Experience/Certification as American Society for Nondestructive Testing (ASNT) Level II in the following disciplines: Ultrasonic Testing/Shear Wave and Straight Beam.
• Ability to work independently to establish procedures.
• Good interpersonal and communication skills.
• Excellent blueprint reading skills.
• Experience in Quality Control.
• Able to actively participate in continuous improvement efforts that further the company values and efficiency of people and processes within the company.
• Knowledge of AISC requirements.
• Knowledge of RCSC specifications for High-Strength Bolts (ICC certification).
• Knowledge of SSPC Good Painting Practices (SSPC C1 certification.
• Knowledge of material specifications (ASTM).
• Knowledge of welding specifications (AWS).
• Proficient with MS Office (Outlook, Word, Excel).
• Experience in a fabrication environment, preferably production shop or general contractor companies.
• Knowledge of software programs FabSuite and Bluebeam.

Qualifications: BA in Supply Chain Management with 6 years of Experience

• Previous experience working in a QC/Inspection role.
• Food/FMCG/Pharma/Chemical experience or similar.
• Strong attention to detail regarding accuracy and precision of all documentation and products.
• Ability to review, analyse, advise, and guide the production team in challenging time frames.
• Able to work openly and gain trust throughout the organisation.
• Ability to investigate root cause and suggest corrective/preventative actions.
• Must be enthusiastic and passionate when working as part of a team.
• Able to work under pressure and to strict and sometimes challenging deadlines.
• Able to focus on systems and procedures set and controlled by the management.
• Excellent organisational and time management skills with the ability to prioritise workload.

Qualifications: BA in Operations Management with 3 years of Experience

• Must have contract experience.
• Experience with Support Services.
• Must meet all deadlines for assigned work.
• Ability to comply with all safety rules and regulations.
• Must have the ability to obtain a security clearance within 90 days of hire.
• Must have the ability to successfully pass pre-employment screening as well as random screenings throughout employment.
• Ability to comply with written and oral instruction and direction, Alutiiq, LLC maintains a professional work environment.
• Ability to work independently as well as in a team environment.

Qualifications: BS in Chemistry with 2 years of Experience

• Able to undertake physical goods inspection of raw materials at the point of receipt to ensure they are compliant and fit for purpose.
• Able to perform regular assessments of product production and packing process to ensure consistency and conformity to associated SOPs.
• Able to perform sample checks of finished batches in line with SQL techniques.
• Able to undertake internal audits of Quality processes, predominantly at the Basingstoke site.
• Able to sign off on Certificates of Conformity, along with batch sign off/release of goods, ensuring alignment to GDocP.
• Excellent computer skills.
• Good written and oral communication skills.

Qualifications: BA in Business Administration with 3 years of Experience

• Experience as Quality Controller/Assurance and Supervisory in FMCG.
• Strong computer literacy.
• Able to pay attention to detail, faultfinding and problem-solving.
• Strong raw material grading and QC processing background.
• Understanding of the processing process and being innovative.

Qualifications: BA in Management Information Systems with 4 years of Experience

• Experience working within a manufacturing environment.
• Knowledge of garment construction.
• Able to eye for detail.
• Basic working knowledge of Microsoft Excel and Word.
• Able to prioritise and manage own workload.
• Experience working within inspection/quality processes.

Qualifications: BS in Chemistry with 3 years of Experience

• Relevant post-apprenticeship experience.
• Able to interpret engineering drawings and specifications.
• Good communication skills, as an effective liaison with the tool/manufacturing engineering.
• Willingness to learn and work with new technology, materials, processes, machines and equipment and work to achieve a delegated operator stamp.
• Willingness to work a range of shifts, including weekend shifts.

Qualifications: BS in Food Science with 2 years of Experience

• Relevant experience in a laboratory.
• Able to work efficiently on a team.
• Able to be flexible and adaptable to meet customer/business requirements.
• Able to attend to detail and follow written instructions.
• Able to communicate effectively, verbally and in writing.
• Able to manage projects and work on multiple activities at the same time.
• Able to use MS Office applications.

Qualifications: BS in Industrial Engineering with 1 year of Experience

• Experience in managing Quality tools and problem-solving tools.
• Processes knowledge on Quality and at the industrial level.
• Management experience (for PIQ manager).
• Experiences in Industry.
• Able to manage project management or equivalent.
• Able to demonstrate technical mastery of railway products.
• Must have an international mindset and be fluent in English.
• Ability to work in a matrix organization.

Qualifications: BS in Chemistry with 5 years of Experience

• Experience in auditing and accounting.
• Fluent in English, French.
• Strong knowledge of audit approaches, financial accounting concepts and IFRS (IFRS 9).
• Excellent command of Excel and in manipulating data sets.
• Knowledge of SAP.
• Good attention to detail.
• Ability to organise workload.
• Ability to positive attitude, be reliable, and be self-motivated.

Qualifications: BA in Business Administration with 4 years of Experience

• Must be passionate about fresh fish quality control, with a desire to learn and develop the product category.
• Knowledge of the quality and cut of the fresh fish and the fish industry.
• Previous experience working with fresh fish quality standards for UK retail supply.
• Able to work as part of a buying and QA team, whilst also working independently to drive innovative projects within the fish category.
• Able to be analytically minded, pragmatic.
• Must have a keen eye for detail.
• Must have organised with strong time management skills.
• Strong multitasker who enjoys working to schedules and deadlines.
• Good understanding of Microsoft Office Word and Excel.
• Good presentation skills with the ability to communicate and present Quality Development results to buyers.

Qualifications: BS in Quality Assurance with 5 years of Experience

• Ability to pay attention to detail.
• Excellent communicator, with an ability to use both data and intuition to make and inform quick decisions.
• Strong time management skills and the ability to manage deadlines.
• Ability to provide constructive criticism, comprehensive and decisive.
• Ability to maintain a calm and composed temperament under pressure.
• Excellent verbal and written communication skills.
• Photography and Photo editing experience.
• Must have fashion knowledge.
• Must have informatics understanding of informatics and Microsoft Office knowledge.
• Fluent in Portuguese and English.

Qualifications: BS in Industrial Engineering with 3 years of Experience

• Must have experience in a footwear manufacturing environment/footwear inspection in the quality control field.
• Good communication skills in English (both verbal and written).
• Must have good analytical skills.
• Must be proactive and a problem solver, having self-initiative.
• Able to work hard and must have a willingness to learn and improve.
• Able to be oriented.
• Must have the ability to work in a high-pressure environment.
• Must have the ability to work independently, and at the same time must be a team player who can work harmoniously with others.

Qualifications: BA in Management Information Systems with 4 years of Experience