Job Summary: 

• Provide a skilled execution of planned, reactive and corrective instrumentation maintenance activities to ensure the ongoing reliability of equipment across the plant
• Apply effective problem-solving and electronic or electrical fault diagnosis skills, adhering to identified work priorities to ensure that customers and stakeholders are supported in their daily operational needs
• Identify and carry out occasional plant modification work to help enhance plant safety and improve efficiency
• Conduct inspections, testing, calibration, adjustments and monitoring tasks to maintain efficient plant and build-in equipment reliability
• Update the CMMS with work progress and demand spares for work tasks and or to maintain critical stock levels
• Cooperate and collaborate with other team members to continually drive the proactive engineering programme, participate in failure investigations, identify and report back reliability issues within the plant
• Support the project teams at initial design stages to offer advice on the correct selection of plant and equipment to ensure improved levels of future plant reliability and maintainability
• Interpret technical drawings for planning, executing and specifying material to support job duties
• Ensure that all relevant departmental administrative requirements such as time sheets, work orders (WMO), stores purchase requisitions, etc. are completed to ensure concise work history and financial accountability
• Carry out statutory and other testing on site to help maintain both ISO 9001 and ISO 14001 accreditation
• Take ownership of own training and development plans to ensure continued development of own skills and expertise, undertaking additional training skills to keep abreast of technology changes and the changing needs of the business
• Issue permits and control contractors
• Adhere to life-saving policies and management of change procedures

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Fault Diagnosis (Hard Skills)
• Plant Modification (Hard Skills)
• Calibration Testing (Hard Skills)
• CMMS Updating (Hard Skills)
• Team Collaboration (Soft Skills)
• Technical Drawings (Hard Skills)
• Problem Solving (Soft Skills)

Job Summary: 

• Perform programming and maintain PLC, VFD, and MMI documentation, including WonderWare and Allen-Bradley software
• Specify and order parts to perform repairs or installations
• Complete daily maintenance and repair logs
• Perform electrical construction work, including running conduit and pulling wires
• Clean and maintain work area
• Comply with all safety rules and plant policies, as well as FDA-defined Good Manufacturing Policies (GMPs)
• Communicate with plant production, maintenance and engineering personnel
• Install, maintain, repair, overhaul, calibrate and test a wide variety of industrial instrumentation that record, indicate, control and regulate level, flow, pressure, temperature, position and water analysis
• Make periodic preventative maintenance inspections of all metering control instruments, diagnosing existing or potential trouble, clean, lubricate, calibrate and adjust as conditions indicate
• Lay out, install and place into service new metering, controlling and recording devices, calibrating, and may extend or connect related electrical circuits

Skills on Resume: 

• PLC Programming (Hard Skills)
• Parts Specification (Hard Skills)
• Maintenance Logging (Hard Skills)
• Electrical Construction (Hard Skills)
• Safety Compliance (Soft Skills)
• Team Communication (Soft Skills)
• Instrumentation Calibration (Hard Skills)
• Preventive Maintenance (Hard Skills)

Job Summary: 

• Perform electrical and instrumentation maintenance assignments, to include routine maintenance, calibration, diagnostics, troubleshooting, repair, installation and overhaul of manufacturing or processing equipment within an aseptic production environment.
• Ensure that the aseptic production equipment is maintained to an appropriate standard in line with current pharmaceutical regulatory requirements, industry standards, government regulations and requirements.
• Provide maintenance support to all aspects of the production efforts as established in department procedures and by regulatory agencies in order to ensure and maintain safe, CGMP-compliant equipment and facilities.
• Work on all electrical and electronic equipment, such as electrical components, controllers, programmable logic controllers, robots, servos, VFDs, electric motors, control panels, instrumentation devices, wire, cables, printers, conduit, etc.
• Utilize standard test equipment, test fixtures, software, and hand tools, perform routine and moderately complex functional tests, calibration, and performance verification to instruments and prescribed assemblies.
• Complete and document all corrective and routine preventive maintenance and scheduled performance evaluations for assigned equipment.
• Partner with Quality to ensure processes and products are in compliance with all local, state, and federal rules and regulations.
• Oversee that processes are in CGMP compliance, and establish systems that identify opportunities for improvement and make constructive suggestions for change to improve process effectiveness to heighten quality.

Skills on Resume: 

• Electrical Maintenance (Hard Skills)
• Equipment Calibration (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Troubleshooting Skills (Hard Skills)
• Test Equipment (Hard Skills)
• Documentation Accuracy (Hard Skills)
• Quality Collaboration (Soft Skills)
• Process Improvement (Soft Skills)

Job Summary: 

• Performs required biological monitoring tests on all sterilizers according to facility policy.
• Maintains the availability of supplies for recording continuity during the sterilization process.
• Cleans sterilizers according to facility policy.
• Maintains accurate sterilization records.
• Maintains inventory levels and accurate records.
• Performs weekly inspections of all sterile items in the clean, pack, and prep area and checks for outdated items and package integrity of wrapped sterilized items, replacing items.
• Places items in the correct location.
• Maintains adequate inventory of supplies for the sterile processing area.
• Maintains and updates the instrument tray inventory list.
• Maintains current information regarding routine preference cards.
• Adheres to HIPAA guidelines outlined in clinic policies and procedures.

Skills on Resume: 

• Biological Testing (Hard Skills)
• Sterilizer Cleaning (Hard Skills)
• Record Maintenance (Hard Skills)
• Inventory Control (Hard Skills)
• Inspection Skills (Hard Skills)
• Item Placement (Hard Skills)
• Policy Compliance (Soft Skills)
• HIPAA Adherence (Soft Skills)

Job Summary: 

• Perform equipment calibration, preventive maintenance, and repair within a laboratory environment.
• Troubleshoot and diagnose equipment malfunctions on various lab equipment (shakers, centrifuges, autoclaves, freezers, DI/RO systems, fume hoods, etc.).
• Communicate effectively with internal customers (scientists, engineers, and production staff) regarding equipment issues, timelines, and corrective actions.
• Respond to service calls and write detailed service reports.
• Coordinate calibration, maintenance, and repair activities with external vendors.
• Assist with the identification, purchase, and management of spare parts inventory.
• Develop and revise calibration and preventive maintenance standard operating procedures.
• Collect and organize technical data from equipment manufacturers, users, and engineering personnel.
• Participate in new lab construction, build-out, and equipment moves to share best operational practices.
• Perform general maintenance (installation, seismic bracing, consumable replacement).
• Ensure all functions are performed safely and in accordance with applicable laws and regulations, as well as company policies, procedures, and controls.

Skills on Resume: 

• Equipment Calibration (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Fault Diagnosis (Hard Skills)
• Technical Communication (Soft Skills)
• Service Reporting (Hard Skills)
• Vendor Coordination (Soft Skills)
• SOP Development (Hard Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Interpret and work from blueprints, drawings, sketches, plans, and technical documents.
• Perform the calibration and repair of all flow metering devices.
• Recommend control system modifications with documented justification that result in standard utilization of parts and materials and reduce operating and repair costs.
• Establish and enforce uniform electrical repair safety procedures at all plant sites.
• Make modifications to as-built electrical drawings based on system modifications and update all electrical component equipment history files.
• Establish and maintain scheduled control system maintenance and calibration programs for plant equipment.
• Direct the work of electrical subcontractors and all outside control system repair work.
• Maintain record-keeping associated with all electrical repairs and modifications.
• Follow oral and written instructions.
• Establish and maintain cooperative relationships with those contacted during the course of work.
• Regularly inspect the working condition and maintain the cleanliness of equipment and surrounding areas.
• Assist in coordinating job activities with other team members.
• Assist with review of capital improvement project studies, designs, and contract drawings.
• Forecast material and equipment needs.
• Provide on-the-job training to less experienced employees.

Skills on Resume: 

• Blueprint Reading (Hard Skills)
• Flow Calibration (Hard Skills)
• System Modification (Hard Skills)
• Safety Procedures (Hard Skills)
• Record Keeping (Hard Skills)
• Team Coordination (Soft Skills)
• Vendor Supervision (Soft Skills)
• Employee Training (Soft Skills)

Job Summary: 

• Report any health, safety, and environmental hazard observations, near misses, accidents, or incidents to the EC&I maintenance team leader.
• Support health and safety monitoring and performance to include safety inspections, plant inspections, plant area responsibilities, and participate in routine health and safety meetings and forums.
• Work in full compliance with Covanta’s safe system of work and site safety rules.
• Support the development and review of Covanta’s maintenance procedures, safe working practices, and risk assessments.
• Participate in facility improvement processes, coordinate corrective actions, defect notifications, and rectification.
• Collaborate with the operations team to deliver facility key performance indicators.
• Be responsible for conducting proactive (preventative) and reactive (breakdown) maintenance to allow safe reliable facility operation.
• Be responsible for the maintenance, fault diagnosis, and repair of all electrical, controls, and instrument equipment at the facility within their own competence levels.

Skills on Resume: 

• Hazard Reporting (Soft Skills)
• Safety Monitoring (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Procedure Development (Hard Skills)
• Process Improvement (Soft Skills)
• Team Collaboration (Soft Skills)
• Preventive Maintenance (Hard Skills)
• Fault Diagnosis (Hard Skills)

Job Summary: 

• Carry out hands-on proactive and reactive maintenance activities in accordance with prescribed quality systems, procedures, risk assessments, and OEM recommendations.
• Review OEM manuals and create maintenance documentation for EC&I equipment, including maintenance strategies, safe working procedures, and technical specifications.
• Take an active role in the development and ongoing management of the facility's computer maintenance management system (CMMS) for all maintenance activities.
• Contribute towards the planning and execution of EC&I outage work scopes and maintenance management systems.
• Manage and supervise specialist EC&I contractors for routine and non-routine work and during peak maintenance periods such as outages.
• Ensure the suitable procurement and management of contractors to the facility site rules and health, safety, and environmental requirements.
• Self-track personal progress against prescribed plans and identify conflicts, delays, and requirements for rescheduling, providing relevant information to the maintenance planner.
• Utilize the site management of the change process to capture all plant modifications.
• Provide adequate EC&I maintenance cover for proactive and reactive maintenance.

Skills on Resume: 

• Maintenance Execution (Hard Skills)
• Documentation Creation (Hard Skills)
• CMMS Management (Hard Skills)
• Outage Planning (Hard Skills)
• Contractor Supervision (Soft Skills)
• Procurement Oversight (Hard Skills)
• Progress Tracking (Soft Skills)
• Change Management (Hard Skills)

Job Summary: 

• Perform preventive maintenance, calibrations, modifications, installations, and troubleshooting or repairs on a wide range of central utilities systems and technologies.
• Provide operational and apprentice training in the implementation of those systems in compliance with company standards and procedures and government regulations (SOPs, xGMPs, GLPs, PSM, etc).
• Serve as a maintenance subject matter expert in areas of engineering (process design, material selection, documentation, calibration, testing and problem-solving methodology, project scope and follow-up).
• Be responsible for priority assessment and decision making as it relates to troubleshooting, diagnostics, assembly, repair, and proactive maintenance of systems and equipment in a cost-effective manner.
• Utilize tools of the trade to include basic tools and electrical signal measuring and calibration devices.
• Participate in multi-craft work activities.
• Develop solutions to routine problems following established policies and procedures.
• Communicate effectively in developing and implementing solutions.
• Ensure that electronic and pneumatic instrumentation used in various commission facilities functions properly.
• Investigate reports of equipment malfunctions and take necessary corrective action.

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• System Calibration (Hard Skills)
• Troubleshooting Skills (Hard Skills)
• Apprentice Training (Soft Skills)
• Subject Expertise (Soft Skills)
• Priority Assessment (Soft Skills)
• Problem Solving (Soft Skills)
• Instrumentation Testing (Hard Skills)

Job Summary: 

• Use and understand the safe work program, including hot work, line entry, and confined space entry.
• Keep up to date on all required training from JLL and the Pfizer PLS system.
• Maintain contacts primarily within the immediate work group or within the normal process-related workflow.
• Measure results on a daily or weekly basis.
• Check and qualify electrical input or output signals and related signal wiring for field instrumentation and devices.
• Use industrial test equipment such as ammeters, voltmeters, manometers, and oscilloscopes and specialized test equipment to monitor and calibrate instrumentation systems.
• Install, calibrate, maintain, and inspect process systems and supporting instrumentation throughout the facility.
• Inspect and review manufacturing equipment installations for design and troubleshooting purposes.
• Review and update preventive maintenance tasks and procedures.
• Write and record pertinent work order information and data tracking.

Skills on Resume: 

• Safety Compliance (Soft Skills)
• Regulatory Training (Hard Skills)
• Signal Testing (Hard Skills)
• Test Equipment (Hard Skills)
• Instrumentation Calibration (Hard Skills)
• Equipment Inspection (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Data Recording (Hard Skills)

Job Summary: 

• Manage preventative maintenance activity to ensure plant uptime is optimized to maximize value and eliminate waste and risk.
• Fault find and repair all instruments and control equipment relating to production, utilities, and safety control systems across the offshore installation.
• Operate and isolate all instruments and control equipment safely in line with CNOOC's safe working practices, procedures, and policies.
• Accept accountability to ensure that all breakdowns are investigated thoroughly, engaging with internal and external stakeholders, including vendor supply chain companies, to develop safe, practical, and effective solutions.
• Report to the senior instrument technician or maintenance supervisor, and carry out emergency duties as identified in the emergency response plan or by the OIM.
• Maintain ESD and fire and gas detection systems to meet availability targets and coverage requirements defined in performance standards.
• Ensure operational delivery while keeping abreast of industry best practices and standards.
• Embrace CNOOC’s competency model with the expectation of attainment of CNOOC’s OPITO-approved competency framework to meet the lifelong learning commitment.
• Foster a collaborative culture across a diverse group of people.

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• Fault Diagnosis (Hard Skills)
• Safe Operations (Hard Skills)
• Breakdown Investigation (Soft Skills)
• Emergency Response (Hard Skills)
• System Maintenance (Hard Skills)
• Industry Knowledge (Hard Skills)
• Collaborative Culture (Soft Skills)

Job Summary: 

• Calibrate, troubleshoot, repair, and replace process instruments as a part of the facility’s maintenance program.
• Maintain process instruments, including valves, vibration monitors, and other instruments.
• Pressure test pneumatic instruments for leaks, pneumatic instruments with controllers, transducers, and valves in service.
• Perform troubleshooting on energized motor controls.
• Conduct instrumentation evaluation and troubleshooting for electrical, pneumatic, electronic, and programmable logic control (PLC) systems.
• Involved in the evaluation of instrument performance to identify optimization and enhancement opportunities.
• Loop check electrical wiring for continuity and proper termination.
• Perform field calibration of electronic instruments with transmitters, controllers, transducers, valves, and recorders in service.
• Read, understand, correlate, and troubleshoot from one-line schematics, P and ID's, and ladder diagrams.
• Use electrical equipment testers, including V.O.M., AMP meter, and 1000-volt insulation tester.
• Communicate and apply electrical OSHA rules and regulations.

Skills on Resume: 

• Instrument Calibration (Hard Skills)
• Valve Maintenance (Hard Skills)
• Pressure Testing (Hard Skills)
• Motor Troubleshooting (Hard Skills)
• PLC Systems (Hard Skills)
• Performance Evaluation (Soft Skills)
• Wiring Inspection (Hard Skills)
• OSHA Compliance (Soft Skills)

Job Summary: 

• Commit to and conform to safe work practices and procedures.
• Ensure compliance with the SAP process for work execution and capture related transactional data into the SAP system.
• Execute work as per schedule and the relevant work instructions to a high level of maintenance quality.
• Provide input into root cause analysis and subsequent resolution of issues affecting equipment reliability.
• Initiate updates to work procedures to ensure they are accurate and relevant to equipment as per the SAP process.
• Ensure adequate scoping of corrective work to facilitate the planning process.
• Ensure returns of unused or reparable materials are processed accurately.
• Ensure timely and accurate reporting of all events and hazards, and participate in workplace investigations or observations.
• Review and request updates to work management and other master data.

Skills on Resume: 

• Safety Compliance (Soft Skills)
• SAP Process (Hard Skills)
• Work Execution (Hard Skills)
• Root Cause (Hard Skills)
• Procedure Updating (Hard Skills)
• Work Scoping (Hard Skills)
• Material Handling (Hard Skills)
• Hazard Reporting (Soft Skills)

Job Summary: 

• Maintain instrument and electrical equipment for the area of responsibility with instrumentation being the primary focus.
• Set up and calibrate, test, measure, and repair all types of electrical controls, instruments, and electronic variables.
• Repair, maintain, and install electrical and instrument equipment and machinery.
• Troubleshoot and repair malfunctions safely and efficiently, and help document failure analysis.
• Collect equipment operation and history data to facilitate reliability improvements.
• Actively participate in the implementation of the Global Maintenance Work Process for E/I work.
• Provide the work activity coordinator with all required information from each job performed, including feedback on what was found and done, and hours put in.
• Provide the field planner with all required information to assemble an effective plan on complex E/I jobs.
• Coordinate E/I troubleshooting based on priority in plant.
• Provide operating discipline for E/I tasks in area of responsibility.
• Work with the preventive and predictive maintenance (PPM) coordinator role in defining appropriate E/I spare parts, building equipment files in SAP, and defining necessary scheduled services for E/I in area of responsibility.

Skills on Resume: 

• Instrument Maintenance (Hard Skills)
• Equipment Calibration (Hard Skills)
• Electrical Repair (Hard Skills)
• Failure Analysis (Hard Skills)
• Data Collection (Hard Skills)
• Work Process (Hard Skills)
• Job Feedback (Soft Skills)
• Troubleshooting Coordination (Soft Skills)

Job Summary: 

• Inspect, commission, maintain, and troubleshoot control instrumentation and fire and gas equipment.
• Complete all relevant project documentation, including knowledge of completion systems.
• Perform highly skilled commissioning, testing, maintenance, and repair on control, metering, and recording instruments, control apparatus, data logging and display equipment, communications or telemetering systems, and fire and gas equipment.
• Perform commissioning duties on control circuits, level control devices, flow control devices, temperature control devices, and pressure control devices.
• Install, calibrate, commission, troubleshoot, and repair input sensors such as flow meters, level transducers, pressure transducers, fire and gas equipment, and other monitoring equipment.
• Support the execution of commissioning procedures for assigned electrical tasks.
• Accept mechanically complete subsystem packages from construction.
• Manage punch lists and take responsibility for the offered subsystems or systems.
• Complete all relevant project documentation including knowledge of completion systems.
• Read, interpret, and work from vendor documentation, project drawings, schematic diagrams, and equipment manuals.

Skills on Resume: 

• Instrumentation Commissioning (Hard Skills)
• Fire Gas (Hard Skills)
• System Testing (Hard Skills)
• Device Calibration (Hard Skills)
• Sensor Installation (Hard Skills)
• Electrical Commissioning (Hard Skills)
• Punch List (Hard Skills)
• Technical Documentation (Hard Skills)

Job Summary: 

• Maintain and repair low, medium, and high voltage switchgear.
• Install and maintain cathodic protection, corrosion control, and associated equipment.
• Commission lighting systems and associated control systems.
• Inspect and set safety switches.
• Maintain records and prepare regular and special reports on electrical and electronic systems.
• Analyze work problems and making corrections will facilitate the completion of system assignments.
• Maintain equipment records and parts inventory.
• Coordinate activities with other departments and staff.
• Establish positive working relationships with immediate supervision and personnel from other departments.
• Communicate clearly and concisely, both orally and in writing.
• Read, understand, and follow permit-to-work procedures.

Skills on Resume: 

• Switchgear Maintenance (Hard Skills)
• Cathodic Protection (Hard Skills)
• Lighting Commissioning (Hard Skills)
• Safety Inspection (Hard Skills)
• Record Keeping (Hard Skills)
• Problem Analysis (Hard Skills)
• Team Coordination (Soft Skills)
• Clear Communication (Soft Skills)

Job Summary: 

• Complies with company policy about safety and work practices
• Installs power supply wiring and conduit for newly installed machines and equipment, including conveyors and programmable controllers
• Uses interface controller, meters, and test equipment to troubleshoot automated machinery, to operate automated machinery, to test for malfunctions, and to verify repairs
• Diagnoses, repairs, or replaces faulty electronic components, such as printed circuit boards
• Replaces faulty electrical components of the machine, such as relays, switches, and motors, and positions sensing devices
• Tests malfunctioning machinery and discusses malfunctions with other maintenance workers to diagnose malfunctions
• Connects power supply wires to machines and equipment, and connects cables and wires between machines and equipment
• Diagnoses malfunctioning apparatus such as transformers, motors, field sensors, transmitters and lighting fixtures and replaces damaged or broken wires and cables
• Diagnose and repair thermocouples, pressure transmitters, control valves, flowmeters, distributive control system equipment, and variable frequency drives
• Replaces electric motor bearings
• Plans layout of wiring and installs wiring, conduit, and electrical apparatus in buildings
• Diagnoses and replaces faulty mechanical, hydraulic, and pneumatic components of machines and equipment

Skills on Resume: 

• Safety Compliance (Soft Skills)
• Wiring Installation (Hard Skills)
• Machinery Troubleshooting (Hard Skills)
• Component Repair (Hard Skills)
• Power Connections (Hard Skills)
• Apparatus Diagnosis (Hard Skills)
• System Calibration (Hard Skills)
• Mechanical Repair (Hard Skills)

Job Summary: 

• Diagnose and correct equipment problems.
• Calibrate and align equipment.
• Complete preventive maintenance activities.
• Check the sizing of components and parts.
• Specify, requisition, and install parts and equipment.
• Coordinate maintenance of spare parts.
• Assist in planning, prioritizing, and scheduling maintenance through the planner, work coordinator, and operations input.
• Set up and calibrate, test, measure, and repair all types of controls and instruments with pneumatic, electrical, and electronic variables.
• Repair, maintain, and install equipment and machinery that is used in the process.
• Troubleshoot and repair malfunctions and document failure analysis.
• Collect equipment operation and history data to facilitate reliability improvements.
• Work within established maintenance work processes and help resolve issues that surface as a result of planning and scheduling work.

Skills on Resume: 

• Equipment Diagnosis (Hard Skills)
• Equipment Calibration (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Parts Specification (Hard Skills)
• Spare Coordination (Hard Skills)
• Maintenance Planning (Soft Skills)
• Failure Analysis (Hard Skills)
• Reliability Improvement (Soft Skills)

Job Summary: 

• Report directly to the maintenance supervisor and deputize for this position.
• Maintain all instrumentation or control systems for the process and utility systems to optimize availability.
• Complete routine maintenance, fault diagnosis, corrective maintenance, and installation of equipment.
• Update or maintain the CMM system.
• Safeguard the availability and operating condition of instrumentation and control systems so that production targets are achieved.
• Ensure fire and gas detection or ESD are maintained for maximum reliability and availability.
• Operate as part of an integrated multi-disciplined team.
• Work at all times within the safety management systems and safety case.
• Ensure work carried out by third-party personnel conforms to statutory regulations.
• Assist other trades or disciplines within the limits and capabilities or experience.
• Liaise with technical authorities regarding issues relating to instrument equipment or systems held on the asset.
• Perform in an emergency role by the company's emergency response procedure manual.
• Carry out planning or procurement and CMMS work orders in preparation for maintenance activities.
• Carry out safe instrument isolations within the platform PTW systems for self and other performing authorities.

Skills on Resume: 

• Instrumentation Maintenance (Hard Skills)
• Fault Diagnosis (Hard Skills)
• CMMS Updating (Hard Skills)
• System Reliability (Hard Skills)
• Fire Gas (Hard Skills)
• Team Collaboration (Soft Skills)
• Regulatory Compliance (Hard Skills)
• Emergency Response (Hard Skills)

Job Summary: 

• Process equipment, including decontamination, tray assembly and preparation, sterilization, storage, and distribution.
• Check the condition and performance of all instruments and equipment. 
• Report equipment malfunction to clinical supervisor, director, and or product manager before the end of the shift.
• Check out-dated trays and supplies in the sterile supply cabinet and complete processing appropriately.
• Check and maintain washer or sterilizer equipment.
• Provide patient transportation throughout the surgical department.
• Assist with the transfer of the patient from the surgical table to the gurney or bed at the end of the procedure.
• Assist the nurse and anesthesiologist with transporting the patient to PACU.
• Deliver surgical specimens to the appropriate department, verifying that the correct patient information is present.
• Maintain current knowledge of sterilization equipment and techniques. 
• Practice universal precautions, infection control procedures, and good body mechanics.
• Serve as an additional resource person in the provision of patient care, as procedures require the need for additional support or positioning personnel.
• Maintain a neat and safe work environment.
• Assist with the training of new personnel.
• Maintain confidentiality of all patient and hospital-related information.

Skills on Resume: 

• Equipment Sterilization (Hard Skills)
• Instrument Inspection (Hard Skills)
• Equipment Reporting (Soft Skills)
• Patient Transport (Soft Skills)
• Specimen Delivery (Hard Skills)
• Infection Control (Hard Skills)
• Staff Training (Soft Skills)
• Confidentiality Practice (Soft Skills)

Job Summary: 

• Perform and maintain competencies in the reprocessing of endoscopes and scope washers.
• Identify actual or potential problems with the integrity of endoscopes and assist in arranging for repairs.
• Maintain documentation related to the inventory and repair of endoscopes.
• Demonstrate an awareness of the daily schedule and maintain a steady level of productivity.
• Maintain compliance with regulatory standards (OSHA, BBP, and biohazard waste removal), accreditation standards, best practices, and center policy and procedures that impact patient, employee, and environmental safety, and report observations of non-compliance.
• Implement related infection control practices to prevent the potential for cross-contamination.
• Perform manual and mechanical cleaning methods, cleaning implements, and equipment (automated flushing systems and reprocessors).
• Perform pre-cleaning and transport of used scopes and accessories.
• Use high-level disinfectants (chemicals, use of test strips, exposure time, shelf life, and use life).
• Demonstrate a working knowledge of endoscopic supplies and equipment.
• Implement related infection control practices to prevent the potential for cross-contamination.
• Perform leakage testing procedures, test methods, and actions required following a failed leak test.
• Accurately complete all required logs.
• Order and stock supply and medical inventory.
• Participate in the center’s QAPI program.

Skills on Resume: 

• Endoscope Reprocessing (Hard Skills)
• Problem Identification (Soft Skills)
• Inventory Documentation (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Infection Control (Hard Skills)
• Leakage Testing (Hard Skills)
• Supply Management (Hard Skills)
• Quality Participation (Soft Skills)

Job Summary: 

• Promote patient, physician, and employee satisfaction by personal example, treating all contacts with respect.
• Support and participate in activities that foster customer service.
• Communicate and follow the organizational chain of command for notification of patient care or service issues.
• Maintain required applicable licensure, certification, and education.
• Attend and complete general and department orientation, in-service programs, and the annual key competencies and mandatory update requirements.
• Participate actively in department staff meetings.
• Know and perform work that is consistent with established age-specific policies and procedures, including the selection of appropriate sizes, flow rates, etc., when issuing supplies or completing surgical procedure trays.
• Clean, assemble, wrap, sterilize, and store supplies and instrument trays.
• Sterilize instruments, equipment, and supplies.
• Handle and store instruments, equipment, and supplies appropriately.

Skills on Resume: 

• Customer Service (Soft Skills)
• Respectful Communication (Soft Skills)
• Certification Maintenance (Hard Skills)
• Staff Collaboration (Soft Skills)
• Policy Compliance (Hard Skills)
• Tray Assembly (Hard Skills)
• Instrument Sterilization (Hard Skills)
• Supply Handling (Hard Skills)

Job Summary: 

• Know and operate sterile processing equipment (washers, steam, gas, ultrasonic, and chemical sterilizers).
• Decontaminate instruments, supplies, and equipment according to established policies and procedures.
• Perform biological and chemical monitoring in accordance with quality assurance standards.
• Document and maintain accurate sterilization records.
• Identify instruments needing repair or replacement and transmit information to the appropriate person.
• Inspect, assemble, and test general and specialty instrumentation for proper functioning.
• Constantly monitor sterilizing cycles which include temperature, sterilizing time, pressure, and dry time.
• Distribute supplies and equipment to units promptly.
• Maintain an adequate supply of packs and supplies to meet area needs, including inventory control, proper labeling, and inspection of linen and labeling of packages.
• Maintain the cleanliness of the work areas.
• Prepare trays for designated areas according to policies and procedures.

Skills on Resume: 

• Equipment Operation (Hard Skills)
• Instrument Decontamination (Hard Skills)
• Quality Monitoring (Hard Skills)
• Record Documentation (Hard Skills)
• Instrument Inspection (Hard Skills)
• Cycle Monitoring (Hard Skills)
• Supply Distribution (Hard Skills)
• Inventory Control (Hard Skills)

Job Summary: 

• Travel to the customer site to provide services (installations, maintenance, or calibrations).
• Adapt equipment and technology to serve user needs.
• Provide technical support to customers related to instrumentation.
• Document and report all repairs and product failures.
• Provide equipment and improvement recommendations.
• Help with the development of preventative maintenance procedures, IQ, OQ, and PQ for the division.
• Execute sequence of testing and calibration programs for instruments and equipment according to blueprints, schematics, technical manuals, standard operating procedures, and other specifications.
• Diagnose equipment failures (breakdowns) and repair per manufacturer's guidelines.
• Perform preventative and corrective maintenance of test apparatus and peripheral equipment.
• Confer with clients, group leader, and other technical workers to assist with equipment installation, maintenance, and repair techniques.

Skills on Resume: 

• Equipment Installation (Hard Skills)
• Customer Support (Soft Skills)
• Technical Reporting (Hard Skills)
• Improvement Recommendations (Soft Skills)
• Procedure Development (Hard Skills)
• Calibration Testing (Hard Skills)
• Failure Diagnosis (Hard Skills)
• Client Collaboration (Soft Skills)

Job Summary: 

• Analyze and convert test data, using mathematical formulas, and report results and proposed modifications.
• Set up test equipment and conduct tests on instruments and equipment.
• Disassemble and reassemble instruments and equipment, using hand tools, and inspect instruments and equipment for defects.
• Sketch plans for developing jigs, fixtures, instruments, and related nonstandard apparatus.
• Modify performance and operation of parts to specifications, using test equipment and precision instruments.
• Conduct tests and inspections of products, services, or processes to evaluate quality or performance.
• Consult with clients on a regular basis regarding usage, placement, and potential future needs of the equipment.
• Recommend corrective actions to the customer.
• Train the customer on how to use the equipment.
• Maintain technical skills through ongoing manufacturer certification and continuing education.

Skills on Resume: 

• Data Analysis (Hard Skills)
• Test Setup (Hard Skills)
• Equipment Assembly (Hard Skills)
• Fixture Design (Hard Skills)
• Performance Modification (Hard Skills)
• Quality Inspection (Hard Skills)
• Customer Consultation (Soft Skills)
• Customer Training (Soft Skills)

Job Summary: 

• Operate decontamination equipment according to established policy and procedures and manufacturer guidelines.
• Decontaminate and clean instruments and equipment, adhering to hospital policies for universal precautions.
• Inspect instruments and equipment to ensure proper functioning, and notify supervisor of unserviceable items.
• Assemble and wrap trays for sterilization following established procedures for completeness, labeling, and documentation.
• Load and operate sterilizers according to established policies and procedures, and document the contents and processing information according to departmental policy.
• Perform quality assurance monitors and documentation for sterilization, including Bowie Dick, biological testing, and chemical indicators, according to established policies and procedures.
• Communicate promptly with end-user departments when sterilization or supplies are delayed or when a delay is anticipated so that alternative measures can be implemented to support other departments’ requirements for sterile instruments or supplies.
• Perform assigned cleaning duties as scheduled to ensure a clean and orderly environment.
• Accurately complete inventory lists for trays and surgeon preference cards, sign, and date.

Skills on Resume: 

• Equipment Operation (Hard Skills)
• Instrument Decontamination (Hard Skills)
• Instrument Inspection (Hard Skills)
• Tray Assembly (Hard Skills)
• Sterilizer Operation (Hard Skills)
• Quality Monitoring (Hard Skills)
• User Communication (Soft Skills)
• Inventory Documentation (Hard Skills)

Job Summary: 

• Respond to requests from OR rooms with urgency and by priority.
• Anticipate OR nurses’ needs to prevent any problems from occurring.
• Write self-evaluation and recognize areas for growth and improvement.
• Participate with the SPD manager to plan realistic goals.
• Work at establishing a good rapport and good working relationship with departments and interdepartmental personnel.
• Participate in quality improvement activities for departmental and section-specific processes.
• Exercise authority, recognizing needs and directing activities to departmental advantage.
• Use initiative to resolve problems with appropriate action and follow through, including documentation for performance improvement.
• Consistently log in and log out of systems, including but not limited to SPM.
• Ensure that quality patient care is delivered to all patients on a 24-hour basis, and the unit is maintained in accordance with professional and regulatory standards and the philosophy and goals of the organization.

Skills on Resume: 

• Request Response (Soft Skills)
• Need Anticipation (Soft Skills)
• Self Evaluation (Soft Skills)
• Goal Planning (Soft Skills)
• Team Collaboration (Soft Skills)
• Quality Improvement (Hard Skills)
• Problem Resolution (Soft Skills)
• Patient Care (Soft Skills)

Job Summary: 

• Work under minimal supervision to repair, service, and maintain plant instrumentation, controls and electrical equipment, combustion turbines, and generators.
• Maintain plant DCIS or PLC control systems and related equipment, including programming changes, troubleshooting, and required preventative and corrective maintenance.
• Use PIDs, manuals, and other sources to troubleshoot control of operating plant systems and review and update logic drawings.
• Build and perform procedures related to corrective and preventative maintenance of instrumentation, controls, and electrical systems.
• Maintain documentation records of calibration, tests, and certification of electrical and instrument equipment.
• Work with and direct contractors and their activities on assigned projects.
• Communicate work progress to the manager or supervisor.
• Assist the operations department.
• Apply the work management process to document and report work requested, assigned, and completed.
• Report abnormal operation to plant management and O&M supervisor.
• Support scheduled and unscheduled call-out support.
• Perform work in accordance with OSHA safety standards applicable to power plants.

Skills on Resume: 

• Instrumentation Maintenance (Hard Skills)
• PLC Troubleshooting (Hard Skills)
• Logic Review (Hard Skills)
• Procedure Development (Hard Skills)
• Record Documentation (Hard Skills)
• Contractor Supervision (Soft Skills)
• Work Communication (Soft Skills)
• Safety Compliance (Hard Skills)

Job Summary: 

• Ensure compliance with the site's cardinal safety rules and with all safety aspects in the execution of work.
• Complete field-level risk assessments.
• Follow protocols of the hazardous work permit process, lock out, tag out (LOTO), and energy isolation procedures by job site regulations.
• Safely perform testing and commissioning functions on calibration, configuration, or replacement of field instrumentation devices.
• Create and collect process and product analyzer calibration checks.
• Troubleshoot instrument or electrical controls through devices to track, inspect, and verify operation.
• Calibrate custody meters and manage documentation.
• Support shutdowns, start-ups, and production slate changes for plants in jobsites.
• Mark up engineering drawings to document changes or disparities.
• Identify cost-effective solutions, follow the company's purchasing procedure and spending limitations.
• Coordinate with quality control to deliver quality points and punch items in compliance with the FDA.
• Follow rules and safety regulations.

Skills on Resume: 

• Safety Compliance (Hard Skills)
• Risk Assessment (Hard Skills)
• LOTO Procedures (Hard Skills)
• Instrumentation Commissioning (Hard Skills)
• Calibration Checks (Hard Skills)
• Control Troubleshooting (Hard Skills)
• Meter Calibration (Hard Skills)
• Drawing Updates (Hard Skills)

Job Summary: 

• Troubleshoot equipment instrumentation and control systems (DCS) and their associated logic (where the logic can easily be accessed).
• Calibrate instruments and use many different instruments to measure temperature, level, pressure, and flow.
• Install and maintain electrical and pneumatic systems.
• Monitor specific equipment (PH).
• Monitor and replace pressure relief valves and rupture discs.
• Monitor plant areas for the presence of combustibles (sniffing).
• Maintain and troubleshoot low-voltage PLCs, primarily DC photo eyes.
• Maintain bulk packaging equipment and weighing system.
• Understand basic electrical circuits and testing using voltage and amperage meters.

Skills on Resume: 

• System Troubleshooting (Hard Skills)
• Instrument Calibration (Hard Skills)
• System Installation (Hard Skills)
• Equipment Monitoring (Hard Skills)
• Valve Maintenance (Hard Skills)
• Gas Detection (Hard Skills)
• PLC Maintenance (Hard Skills)
• Electrical Testing (Hard Skills)

Job Summary: 

• Troubleshoot, check, calibrate, repair, and replace process instrumentation from Endress and Hauser, ABB, and Foxboro, including pressure, temperature, and flow transmitters.
• Troubleshoot, check, calibrate, repair, and replace control valves, pressure regulators, etc.
• Fabricate and install tubing (stainless, plastic, etc.) for control valves.
• Calibrate and repair Mettler Toledo scales.
• Troubleshoot and repair Honeywell and FireEye burner systems.
• Troubleshoot and repair gas chromatographs.
• Loop check and verify the operation of the instrumentation.
• Perform wiring of instrumentation.
• Utilize electrical multi-meters and various electronic communications devices to troubleshoot, check, and calibrate all types and brands of instrumentation.
• Clearly and properly document all work.
• Interface with vendors for maintenance of equipment and other related activities.

Skills on Resume: 

• Instrumentation Repair (Hard Skills)
• Valve Calibration (Hard Skills)
• Tubing Installation (Hard Skills)
• Scale Calibration (Hard Skills)
• Burner Systems (Hard Skills)
• Gas Chromatographs (Hard Skills)
• Wiring Installation (Hard Skills)
• Work Documentation (Hard Skills)

Job Summary: 

• Operate the resin plant mixing equipment during and after commission and hand over the plant to the mix plant process controllers.
• Maintain and install instrumentation equipment in first-class working condition.
• Perform fault finding and attend to breakdowns.
• Calibrate instrumentation equipment and maintain an auditable record of the same.
• Ensure efficient, safe operation of machinery and good instrumentation and electrical fault finding.
• Complete the necessary administrative tasks, including PTW and SHE.
• Implement minor projects, safety, and housekeeping.
• Maintain instrument manuals, drawings, and panels.
• Ensure line efficiency, work order completion rate, and SHE audit requirements are met.
• Analyze and investigate recurring instrument faults.

Skills on Resume: 

• Equipment Operation (Hard Skills)
• Instrumentation Maintenance (Hard Skills)
• Fault Finding (Hard Skills)
• Equipment Calibration (Hard Skills)
• Safe Operation (Soft Skills)
• Administrative Tasks (Soft Skills)
• Document Management (Hard Skills)
• Fault Analysis (Hard Skills)

Job Summary: 

• Maintain proper levels of instruments and supplies needed for reprocessing
• Maintain proper patient charges related to the sterile processing department to all user stations throughout the organization and off-site affiliates
• Accurately maintain comprehensive quality assurance standards related to sterilization and infection control in a sterile area
• Operate within the sterilization procedures
• Determine whether each piece of equipment that is processed is in correct working condition
• Determine whether processed instrumentation meets the stringent criteria for sterility and use in the operating room before distribution
• Maintain adequate levels of reserve supplies for routine use and emergencies
• Deliver scope safely in line with the agreed scope and the project manager or client expectations
• Report progress on jobs in a timely and professional manner

Skills on Resume: 

• Supply Management (Hard Skills)
• Charge Accuracy (Hard Skills)
• Quality Assurance (Hard Skills)
• Sterilization Procedures (Hard Skills)
• Equipment Inspection (Hard Skills)
• Instrument Validation (Hard Skills)
• Reserve Management (Hard Skills)
• Progress Reporting (Soft Skills)

Job Summary: 

• Coordinate and assist in all aspects of operations, maintaining all equipment and supplies for all cases running in the operating room daily
• Set up and calibrate any monitoring device that may be required
• Process to set up IV lines and a temperature monitoring device, independently without any supervision
• Maintain infection control by cleaning, decontaminating and or sterilizing anesthesiology and pain management equipment per manufacturer's recommendations using universal precautions
• Perform basic troubleshooting and minor repairs, or communicate with the supervisor
• Check the condition of the anesthesia station's electrical equipment, such as cords, plugs, switches and various electronic devices, and report any deficiencies to the appropriate service
• Perform other duties assigned relating to anesthesia supplies, equipment, OR stat lab, or the operating room
• Work as part of the team to install structural health monitoring software and systems in a variety of environments, some more challenging than others

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Device Calibration (Hard Skills)
• IV Setup (Hard Skills)
• Infection Control (Hard Skills)
• Troubleshooting Skills (Hard Skills)
• Equipment Inspection (Hard Skills)
• Team Collaboration (Soft Skills)
• System Installation (Hard Skills)

Job Summary: 

• Be responsible for the maintenance on all electronic and pneumatic instruments including meters, monitors, transmitters, flowmeters, level devices, switches, alarms, PLCs, transducers, regulators, control valves, automatic valves, actuators and solenoid valves
• Maintain, troubleshoot, repair, calibrate, modify and install or construct instrumentation equipment and controls under the supervision of the supervisor or project leader
• Perform preventative maintenance on any instrumentation
• Perform loop checking to verify that all the connected components are working properly or to determine if repairs and then red-mark any modifications on associated drawings
• Learn and understand electronic instrument work, which includes both 24vdc and 110vac supply, and both analog and digital signals, such as HART or Fieldbus
• Provide technical input to customers regarding design, installation, repair and safe operation of equipment and systems
• Follow all procedures, including safety procedures, JSAs, work permits and MOCs
• Communicate service issues and delays with supervisors and peers including the customer call center and technical support
• Repair customer pressure calibration instruments returned for service and laboratory calibration standards

Skills on Resume: 

• Instrumentation Maintenance (Hard Skills)
• Equipment Troubleshooting (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Loop Checking (Hard Skills)
• Signal Knowledge (Hard Skills)
• Technical Support (Soft Skills)
• Safety Compliance (Hard Skills)
• Service Communication (Soft Skills)

Job Summary: 

• Adhere to all company environmental, health and safety policies and procedures set out by the HSE department manager
• Assist journeyman and other apprentices with the maintenance, replacement and installation of equipment
• Assist with calibrations and installations requiring instrumentation tubing
• Use hand tools, power tools, testing equipment and specialty tools such as tubing benders
• Use more advanced calibration equipment such as Hart communicators and programs
• Use basic instrumentation test equipment and be able to complete calibrations
• Check meters for continuity, resistance, voltages, and current readings
• Support the instrument I/O system checkout, commissioning and optimization of equipment to help implement capital projects
• Lead by example in safety, quality and work ethic, demonstrating personal initiative in all areas

Skills on Resume: 

• Safety Compliance (Hard Skills)
• Equipment Installation (Hard Skills)
• Tubing Calibration (Hard Skills)
• Tool Utilization (Hard Skills)
• Advanced Calibration (Hard Skills)
• Test Equipment (Hard Skills)
• System Commissioning (Hard Skills)
• Work Ethic (Soft Skills)

Job Summary: 

• Provide compliant and validated technical solutions.
• Build a schedule for the time of instrumentation evaluation on a project.
• Provide accurate solutions to avoid having overdue calibrations.
• Contribute to the achievement of the safety, quality, and production goals and metrics through excellent technical support and problem-solving.
• Consistently develop skills to become a subject matter expert on instrumentation and metrology.
• Contribute to the deployment and integration of continuous improvement methodologies.
• Manage monthly requests and project work.
• Work safely around instrumentation and electrical systems.
• Undertake appropriate Risk Assessments (RA) in order to complete the work scope in a safe and controlled manner

Skills on Resume: 

• Technical Solutions (Hard Skills)
• Schedule Planning (Soft Skills)
• Calibration Management (Hard Skills)
• Problem Solving (Soft Skills)
• Subject Expertise (Soft Skills)
• Process Improvement (Soft Skills)
• Project Management (Soft Skills)
• Risk Assessment (Hard Skills)