• Perform and maintain competencies in the reprocessing of instruments and related equipment
• Ensure adequate inventory of instruments and equipment to meet the needs of providers to perform procedures at outpatient clinical sites
• Adhere to infection control practices to prevent blood-borne pathogen exposure and cross-contamination
• Assist the provider during examination or procedures
• Use chemicals and high-level disinfectants and associated accessories according to the manufacturer’s instructions for use
• Accurately complete all required logs and documents
• Participate in quality improvement programs
• Inspect and assemble instruments
• Dispense and clean instrumentation and equipment
• Disassemble the instrumentation and test for proper functioning

Skills: Instrument Reprocessing, Inventory Management, Infection Control, Procedure Assistance, Chemical Handling, Documentation Accuracy, Quality Improvement, Equipment Assembly

• Report to the instrument engineer and ensure all tasks allocated are carried out safely and efficiently
• Ensure all instrument equipment and control systems that are within the contractual scope of the project are maintained to a high standard
• Ensure that the weekly instrument and control maintenance allocated is executed to plan
• Maintain instrument and control systems, including heating, ventilation and air conditioning (HVAC) system and overall instrument and control system in two control rooms and SPMs
• Ensure all statutory and critical inspections (e.g., PSVs) are completed within the required time frame and the associated certification is securely filed
• Assist in the review of the holdings of materials, spares and special tools and recommend stock levels and purchases where deficiencies or shortages are found
• Assist in the review of maintenance routines and make recommendations on improving the system as it applies to the discipline
• Produce reports on discipline issues
• Be familiar with all major vendors and liaise on technical matters and queries
• Provide discipline input to the project's weekly and monthly reports
• Be conversant with the technical documentation available from the E&C contractor

Skills: Instrument Maintenance, Control Systems, HVAC Systems, Safety Compliance, Inspection Management, Inventory Control, Technical Reporting, Vendor Liaison

• Ensure that all technical documentation required for maintenance is available or is resourced through OEMs or vendors
• Answer technical queries and guide team on matters related to discipline
• Provide clarity on instrument issues for root cause analysis studies
• Monitor equipment performance within discipline and advise on improvement
• Be conversant with project delivery imperatives and support attainment
• Ensure a good knowledge of the project contract
• Commence and design a checklist system for routine maintenance tasks
• Partake in or cooperate with internal or external audits
• Attend weekly maintenance team meeting and raise any issues relating to discipline for further action
• Carry out HSE and technical audits and inspections by the maintenance superintendent
• Compile or receive a detailed written handover before and upon completion of leave and or field breaks
• Report HSE incidents and all near misses and assist in incident investigation

Skills: Technical Documentation, Team Guidance, Root Cause, Performance Monitoring, Contract Knowledge, Maintenance Checklists, Audit Compliance, Incident Investigation

• Perform maintenance and repairs, including software upgrades, on various spectrometric and other analytical instrument systems
• Perform maintenance and repairs on other laboratory equipment and apparatus, including sequencers, centrifuges, heating and cooling devices, and the like
• Provide support for field instruments and systems, including gravimeters, seismometers, SONAR devices, underwater ROV, lake current meters, and the like
• Assist students and faculty with thesis and research projects, including consultation or collaboration on equipment design and fabrication
• Advise and assist faculty in the design and fabrication of custom electronic and electromechanical devices, both analog and digital
• Install, maintain and repair instrument alarm and emergency backup devices, including UPSes
• Manage inventory of instruments, tools, meters, scopes, and common repair parts and components
• Assist with the operation and maintenance of equipment on the R/V Folger and may also serve as a mate
• Advise and assist faculty in the specification, selection, purchase and installation of instruments, computer interfaces, UPS systems, and related laboratory equipment

Skills: Instrument Maintenance, Laboratory Equipment, Field Instruments, Research Support, Device Fabrication, Alarm Systems, Inventory Management, Equipment Installation

• Work as part of a team to deliver the efficient provision of instrument loan or hire to individuals, schools and funded ensembles or organisations
• Assess instruments and equipment for necessary cleaning, repair and maintenance
• Carry out routine cleaning of all instruments before release on hire or loan
• Carry out routine repair and maintenance of instruments in at least one major category (i.e., one or more of woodwind, brass, strings)
• Maintain and prepare First Access instrument sets and accessories for schools (e.g., ocarinas, ukuleles, recorders)
• Maintain and log stock levels of instrument accessories (rosin, valve oil, mouthpieces, etc.) and re-order
• Maintain and prepare world percussion sets for schools (e.g., samba, djembes, steel pans)
• Track demand for instruments and condition of current stock, identify shortfall and liaise with the wider team to facilitate the purchase of appropriate new and replacement instruments
• Unpack, check and label all new stock
• Maintain music library, including checking scores or parts in and out and cataloguing new music
• Periodically assess and dispose of old or unused stock
• Assist with logistics at events such as concerts, festivals and conferences, including on-site set up and loading and unloading of vehicles
• Transport instruments and equipment to or from rehearsals and other events, using company or hired vehicles
• Use the database (Syrinx) to maintain and update stock records and status
• Interact with schools and customers for planning deliveries or collections in conjunction with the administration and facilities coordinator
• Promote musical events and opportunities to parents, schools and wider communities to increase participation

Skills: Instrument Maintenance, Team Collaboration, Stock Management, Repair Skills, Event Logistics, Customer Interaction, Database Management, Music Library

• Assemble instrument procedure trays, packs, case carts and kits
• Assure good working order of equipment
• Clean, decontaminate and disinfect equipment
• Wrap linens, procedure trays, instruments and equipment for sterilization
• Choose an appropriate sterilization process for items and apply the correct sterilization chemical indicator and tape
• Operate, maintain and troubleshoot issues for routine washer and sterilizer machines
• Assist with general housekeeping
• Properly store supplies and equipment and ensure all equipment and supplies are available and ready for procedures
• Coordinate and collaborate effectively with members of a multi-disciplinary team
• Utilize sterile or aseptic technique and abide by AORN standards and UWMC protocols and standards
• Use infection control plans, medication safety, safe lifting techniques and transfer devices appropriately

Skills: Tray Assembly, Equipment Maintenance, Instrument Decontamination, Sterilization Procedures, Machine Operation, Supply Management, Team Collaboration, Infection Control

• Perform instrument calibrations for process, utility and analytical equipment and systems
• Troubleshoot and repair site instrumentation and control system issues
• Perform advanced maintenance and repair activities on equipment and systems used in manufacturing, the process development laboratory, the quality analytical laboratory, or other areas of the site
• Ensure activities are accomplished in a safe manner
• Ensure work is completed in accordance with procedures
• Ensure work activities are completed correctly
• Maximize the right execution the first time execution
• Work in a highly productive and efficient manner to maximize the quantity of activities completed
• Ensure work is appropriately communicated to system operators and key stakeholders
• Ensure work order documentation is completed accurately and completely
• Identify waste, workflow interrupters and other opportunities for improvement, recommend solutions and assist with implementation
• Identify opportunities to learn new skills and actively participate in development that will improve overall team performance

Skills: Instrument Calibration, System Troubleshooting, Equipment Maintenance, Safety Compliance, Procedure Adherence, Work Documentation, Process Improvement, Team Development

• Troubleshoot, repair and maintain the CEM system, crane controls, stoker controls, boiler controls, air pollution control, turbine or generator control, water treatment control and other related power generation control systems and field instrumentation
• Repair and maintain the plant’s ABB DCS and various process PLCs
• Determine actions required for repair, maintenance and calibration of equipment
• Test and troubleshoot pneumatic, hydraulic, electrical and electronic components
• Calibrate and maintain plant hydraulic, electronic and pneumatic control instruments
• Install new plant instrumentation and controls (i.e., installation of field instruments, wires to DCS and PLC systems, add or modify logic and graphic code when new equipment is installed)
• Support the facility during planned and unplanned outage campaigns
• Provide out-of-hours support to plant operations via the on-call roster
• Follow all health and safety rules and regulations

Skills: System Troubleshooting, Control Maintenance, DCS Management, PLC Programming, Component Testing, Instrument Calibration, Equipment Installation, Safety Compliance

• Perform maintenance on plant instruments and electrical equipment and systems in accordance with safety, health and environmental policies
• Maintain and repair electrical, electronic and pneumatic instrumentation for process control, including PLCs, analyzers and distributed control systems
• Ensure that health, safety, security and protection of the environment are given the highest priority in all activities performed within the site
• Install, repair and troubleshoot three-phase medium and low voltage power distribution including transformers, switchgear, motors, variable frequency drives and other electronic and pneumatic equipment
• Install, repair and troubleshoot digital control systems, I/P systems, control valves, flow meters, temperature and pressure transmitters and burner safety management systems
• Install, test and edit programs for programmable logic controllers (PLC) to set up interlocks and alarms, to shut down or start up equipment, and to read, record and transfer digital and/or analog data
• Perform preventive maintenance on electrical equipment and systems
• Utilize all types of industrial shop and portable tools safely and effectively
• Read and understand instrument and electrical drawings, schematics and manuals
• Complete the required written documentation regarding the instrument and electrical equipment and systems
• Be actively involved in achieving department and site-wide goals in safety, environmental compliance, reliability, quality and cost control
• Participate in safety meetings, JHAs, HAZOPs and incident investigations
• Actively advance knowledge and skills in instrument and electrical competencies
• Follow directions and work independently
• Prepare and maintain records in accordance with ISO 9001 requirements

Skills: Instrument Maintenance, Electrical Systems, PLC Programming, Control Systems, Power Distribution, Preventive Maintenance, Safety Compliance, Technical Documentation

• Monitor site performance via SCADA, Remote Desktop and SAP
• Provide all weather station, trackers, UPS, PC, switch, modem, PLC, HMI, AC system, and onsite preventive maintenance associated with the plant process control systems to comply with regulation, best practices, contractual and business needs
• Have working knowledge of solid-state circuitry and programmable controllers
• Work with various PC programs and operating systems
• Perform calibration, preventive maintenance and testing of equipment
• Troubleshoot, diagnose problems and repair plant mechanical, instrumentation and electrical systems
• Provide on-site services for all control systems on the process control network
• Perform and maintain 24x7 uptime of control systems, including parts consumption system support and communications to control systems and other associated devices
• Be responsible for process control PLC SCADA channels, including hardware and software communication

Skills: SCADA Monitoring, Preventive Maintenance, Circuitry Knowledge, PLC Programming, Equipment Calibration, System Troubleshooting, Control Systems, Network Communication

• Ensure overall performance and maintenance of controllers that process and control many of the field devices for the operation of the facility including I/O and related system components that connect field devices to the control systems
• Be responsible for a full network of fiber optic communications for data flow from package systems around the facilities to send and receive data to and from the control systems for operations, control and monitoring 24 hours a day
• Support the logistics department with process control-related spare parts identification and ideal stocking rates
• Maintain system performance by performing system monitoring and analysis and creating service desk tickets for performance tuning by Digital Hub, troubleshooting system hardware, software, networks and operating and system management systems, designing and running system load or stress testing, and escalating application problems to vendors 
• Provide system support for operations on control strategies
• Be responsible for supporting the development of training needed for process control and other systems for maintenance and repairs of the system to maintain reliability and performance
• Lead or assist troubleshooting efforts associated with the safety systems (e.g., fire systems, security, camera) to minimize production upsets and or downtime
• Review changes to technical controls and determine appropriate actions to take to maintain compliance and ensure proper documentation and EGP processes are followed and communicated to all parties
• Provide desktop support and work on all plant process control systems, assisting operations with desktop support issues, while following up to ensure problems are solved

Skills: Controller Maintenance, Fiber Optics, Spare Parts, System Monitoring, Process Control, Training Support, Safety Systems, Desktop Support

• Accurately interpret and apply information from work orders, job orders, specifications, blueprints, ISOs, or other drawings and recognize basic blueprint terms and symbols for job application
• Identify, recognize and demonstrate safe usage of power tools and hand tools appropriate for the job
• Recognize various materials used in instrumentation and control systems and demonstrate a working knowledge of appropriate material handling techniques
• Select and safely use appropriate equipment, which may include (but not limited to) manlifts, forklifts and company trucks
• Check the flows, pressures and temperatures of the sample system
• Safely monitor and repair sample systems
• Accurately operate on various types of test equipment available on sites
• Design and construct complex sample systems, including wiring, conduit, etc.
• Plan and coordinate work with other technicians

Skills: Blueprint Interpretation, Tool Safety, Material Handling, Equipment Operation, System Monitoring, Sample Repair, Test Equipment, Work Coordination

• Be responsible for independently performing electrocardiograms (ECGs) for inpatients (including intensive care) and outpatients using a computerized cardiology data management system (i.e., the Marquette MUSE CV ECG management system with associated carts)
• Be updated periodically and maintain knowledge of current technology
• Recognize serious rhythm disturbances and bring these to the physician's attention
• Identify and correct causes for poor quality tracings while the ECG is being taken and adjust standardization voltage
• Set up ECG carts and apply leads in the appropriate position to obtain various ECG plot formats, such as a signal-averaged ECG
• Transfer ECG records to the MUSE CV ECG system from the mobile units using the appropriate method, such as designated telephone lines, appropriate cable and or software
• Obtain a directory of ECGs stored in the cart memory or disk and use the directory to determine which ECGs require demographic data editing before transfer
• Ensure that all records are transferred and stored in the MUSE system and printer
• Retrieve serial records from the MUSE system by entering patient data and selecting appropriate records for printing
• Assemble each patient's printed record in the proper sequence before submission for the cardiologist's interpretation

Skills: ECG Operation, Data Management, Rhythm Recognition, Lead Placement, Quality Control, Record Transfer, System Knowledge, Patient Records

• Prioritize and provide appropriate instruments for assigned areas
• Prioritize reprocessing activities to ensure multiple case needs are met
• Provide appropriate and functional substitutions as situations warrant
• Respond to requests in a timely and appropriate manner
• Anticipate and meet needs to ensure cases are not delayed
• Collaborate with staff to ensure the availability of instruments and supplies
• Decontaminate items using the appropriate technique and speed, and follow the manufacturer’s instructions
• Follow established procedures for care and handling of instruments
• Demonstrate functional use of a variety of complex instrument systems
• Operate reprocessing or sterilization equipment (sterilizers, aerators, ultrasonic, etc.)
• Identify procedure-specific needs and initiate action to ensure those needs are met
• Assemble routine and complex instrument sets with speed and accuracy using established procedures
• Wrap and prepare instruments for sterilization

Skills: Instrument Provision, Task Prioritization, Case Support, Staff Collaboration, Item Decontamination, Equipment Operation, Set Assembly, Sterilization Preparation

• Perform all sterilization or disinfection monitoring
• Use the manufacturer's instructions throughout all phases of reprocessing
• Help conduct educational sessions for staff growth and competency related to instruments
• Document appropriately, legibly and timely (includes all dates)
• Label instruments or supplies accurately
• Collaborate with surgical technologists, registered nurses and the surgical instrument lead to ensure appropriate functional resources are available
• Monitor the integrity of instruments to reduce loss and or damage
• Prioritize sterilization activities for the appropriate quantity and availability of instruments
• Maintain appropriate sterile instrument availability, both sets and single items
• Identify barriers to effective and efficient resource utilization and initiate corrective action
• Monitor the reprocessing process to ensure appropriate handling of instruments
• Monitor sterilization processes to ensure compliance with standards
• Collaborate with other team members to develop and revise practice patterns

Skills: Sterilization Monitoring, Procedure Compliance, Staff Training, Accurate Documentation, Resource Collaboration, Instrument Integrity, Process Oversight, Practice Development

• Identify opportunities for improvement and initiate corrective action and or refer appropriately
• Demonstrate accuracy of tray assembly to ensure customer satisfaction and quality standards are met
• Inspect instruments for defects and follow the instrument repair process
• Ensure appropriate care and handling of instruments
• Apply appropriate instrument assembly technique and sterilization monitors procedures
• Identify educational needs based on observations, feedback, problems and opportunities
• Assist with product evaluation such as different accessories
• Problem solve and follow through on issues with positive resolution
• Maintain an employee or patient safe environment and wear PPE
• Meet the business needs of department with regular, reliable attendance
• Maintain current licenses and or certifications required for the position
• Practice and reflect knowledge of HIPAA, TJC, DNV, OSHA and other federal or state regulatory agencies guiding healthcare
• Complete all annual education and competency requirements within the calendar year
• Bring any questions or concerns regarding compliance to the immediate attention of hospital's administrative staff
• Take appropriate action on concerns reported by department staff related to compliance

Skills: Process Improvement, Tray Assembly, Instrument Inspection, Care Handling, Assembly Techniques, Product Evaluation, Problem Solving, Regulatory Compliance

• Be responsible for daily troubleshooting and repair of instrumentation in live process units
• Remain current with the assigned area work order request backlog
• Perform reliable instrument maintenance and repair (self-planned and scheduled)
• Suggest and develop PM and repair optimization ideas
• Maintain shop documentation
• Perform instrument mechanical integrity testing and documentation
• Perform instrument turnaround maintenance activities (identify potential scope items, enter turnaround work orders, lead work crews for scope and perform instrument scope work)
• Identify training needs and take a lead role in obtaining training approved on the PDS plan developed with the instrument reliability coordinator
• Perform root cause failure analysis on reactive instrument failures
• Perform incidental maintenance activities through the self-planning process
• Participate in after-hours, on-call or rotation schedule

Skills: Instrument Troubleshooting, Work Orders, Maintenance Planning, Documentation Management, Integrity Testing, Turnaround Maintenance, Root Analysis, On-Call Support

• Read P&ID, isometric, schematic and electrical drawings, and be competent at reading and interpreting blueprints or specifications and making detailed sketches for equipment fabrication or installation
• Measure, cut with blades and torches, thread, groove, bend, solder, braze, weld, assemble, mitre, join and install pipes, valves and fittings to maintain the high standards associated with industries that have to work within limited specifications and sometimes in challenging locations
• Apply knowledge of fault investigation and correction, system testing and calibration developed through experience, practice and training in a range of specialist subject areas
• Work within health and safety regulations to maintain high standards of health and safety, which may require certificates such as offshore survival, medical and safety passport
• Lay out, assemble, install and maintain instrument pipe systems and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling and industrial production and processing systems, applying knowledge of system operations and following blueprints
• Be involved in the selection of instrument systems and components according to specifications
• Read, understand and implement all applicable company or project policies, working practices and procedures, ensuring at all times that the instrumentation technicians' work scope is completed safely and to a high standard
• Complete all work scope in accordance with applicable workpack or job card instructions, associated procedures and drawings or sketches
• Provide support to other trades or disciplines, or form part of an integrated multi-discipline team
• Raise applicable Permit to Work (PTW) to complete the work scope in a controlled and safe manner
• Troubleshoot and repair control and electrical systems (PLCs, transmitters, control wiring, MCCs, soft starters, VFDs, etc.).
• Troubleshoot and repair control or communication networks for well pads and communications tower sites (Ethernet I/P, network switches, fiber optics, Ethernet and serial radio networks).

Skills: Blueprint Reading, Pipefitting Skills, System Calibration, Safety Compliance, Instrument Installation, Component Selection, Permit Management, Network Troubleshooting

• Install or replace basic electrical equipment (e.g., switches, fuses, cables, circuit breakers, light fixtures, raceways, conduit, disconnects, temporary power), including sizing.
• Diagnose basic electrical problems to effect repairs and restore equipment or systems to operating condition (e.g., lighting circuits, 3-wire control circuits, 120V circuitry, heat tracing, motor resets, fuse changes, breaker resets, etc).
• Effectively troubleshoot electrical equipment from 24 VDC to 480 VAC to restore equipment or systems to operating condition.
• Operate basic electrical or pneumatic test equipment (e.g., flukes, signal generators, oscilloscopes, Amtek, MKS).
• Provide process instrumentation support for the IQ or OQ part of projects.
• Provide accurate, complete, and legible work order documentation on both paper copy and in GMARS.
• Provide technical expertise in troubleshooting, maintaining, and repairing power plant Distributed Control Systems and Programmable Logic Control Systems during start-up and day-to-day operations.
• Have an in-depth understanding of power stations or power production processes and work closely with station operations to troubleshoot and correct processes.
• Maintain, calibrate, and perform routine maintenance on all station instrumentation and control devices, including turbine TSI and DEH systems and standard level, pressure, temperature, flow transmitters, and control valves, be able to test, inspect, adjust, and troubleshoot control instrumentation and determine causes of instrument malfunction.
• Read and understand pneumatic, hydraulic, electric, and electronic documentation, and repair power station equipment and systems.
• Work independently and be self-directed when the situations warrant.

Skills: Electrical Installation, Problem Diagnosis, Equipment Troubleshooting, Test Equipment, Instrument Support, Work Documentation, Control Systems, Instrument Calibration

• Develop a working knowledge of instrumentation systems to conduct maintenance, calibration and fault-finding on existing systems
• Read P&ID drawings and red line
• Install new instrumentation systems, including but not limited to pressure, temperature and flow
• Undertake glanding, terminating and testing to client or customer standards and to maintain those systems while upholding safety guidelines and complying with current codes and regulations
• Perform daily and weekly inspections to improve the safety and housekeeping of the instrumentation maintenance team when on shift
• Attend monthly safety meetings, safety inspections and housekeeping when on shift
• Participate in the preparation of risk assessments of high-risk tasks when on shift
• Be responsible for the maintenance of the following areas under the supervision of superiors
• Support the efficient and successful delivery of music instrument loans or hire to individuals, schools and funded ensembles or organisations across local music education hubs
• Contribute to music education hubs’ strategy in line with organizational objectives, National Plan for Music Education priorities and Arts Council England funding requirements
• Ensure all children and young people in the region have access to a wide variety of high-quality music experiences
• Perform complex predictive and preventative instrumentation maintenance functions, including calibrations and equipment-specific testing to include emergency shutdown systems and field transmitters.
• Make complex technical equipment repairs such as control valves, analyzers, flow meters, conservation vents, sight glasses, and other digital or mechanical instruments.
• Perform complex troubleshooting and take appropriate action.

Skills: System Calibration, P&ID Reading, Instrument Installation, Safety Compliance, Risk Assessment, Preventive Maintenance, Equipment Repair, Technical Troubleshooting

• Experience gained in a continuous process industry
• Experience with high-voltage apparatus 
• Experienced in controlling the function of surveying instruments and calculators.
• Knowledge of all aspects of maintenance techniques associated with control systems, pneumatic and hydraulic transducers and instrumentation
• Basic computer knowledge using word processing, spreadsheets, email, and web browsers.
• Demonstrated success in meeting multiple and simultaneous procedure needs.
• Ability to write, read, comprehend, and speak fluent English.
• Critical thinking skills involve using independent judgment in making decisions.
• Effective communication, interpersonal and time management skills.
• Ability to work effectively in a team environment and independently

Qualifications: BS in Instrumentation Engineering with 4 years of Experience

• Experience in a manufacturing or industrial setting as an Instrument Tech
• Knowledge of the NEC (National Electrical Code) and OSHA safety standards
• Extensive knowledge of Industrial Instrumentation and Controls in a gas plant environment
• Working knowledge of measuring process levels, pressures, flows and temperatures
• Familiarization with PLC and Distributed Controls Systems (DCS)
• Understand and follow the company's Safety policies
• Working knowledge of Alternating Current (AC), Direct Current (DC) voltage systems
• Ability to comprehend P&IDs, electrical schematics, loop sheets and equipment manuals
• Ability to repair, test, adjust and install control valves
• Ability to perform preventive and predictive maintenance inspections using diagnostic tools and test equipment and make necessary corrections to maintain a safe and reliable control system
• Ability to create work orders, record maintenance results, and read and update drawings and other documentation
• Ability to monitor, control and instrument equipment to ensure effective and efficient service
• Ability to conduct tests related to functional performance.

Qualifications: BS in Electrical Engineering with 7 years of Experience

• Experience in a related process plant operations reliability activity.
• Familiar with codes and standards associated with wiring and conduit.
• Familiar with all process equipment and functions.
• Comprehensive knowledge of applicable chemical manufacturing processes and hazards within the area or site
• Understanding of electrical hazards and safety, and ability to troubleshoot electrical systems, with support from central engineering.
• Comprehensive knowledge of and ability to troubleshoot 4-20 mA transmitters and electro-pneumatic control loops.
• Comprehensive knowledge and ability to troubleshoot pneumatic control systems consisting of I/Ps, solenoid valves, quick exhausts, actuators, regulators and proportional/integral controllers, both stand-alone and cascaded.
• Comprehensive knowledge and ability to troubleshoot industrial refrigeration skids and machinery vibration monitoring systems
• Comprehensive knowledge of control system architectures, including hardware setup and software configuration.
• Personal computer proficiency and other software used by the company.
• Strong interpersonal abilities to support team philosophy and strategy.
• Strong organizational ability.
• Ability to work independently.
• High mechanical aptitude and ability to work with simple mechanical hand tools.
• Ability to interpret engineering drawings, including P&IDs and PFDs.
• Ability to interpret electrical drawings, including single-line diagrams.
• Be able to navigate a document management system to find relevant work instructions, forms, and supporting documentation.
• Ability to complete all preventive maintenance jobs according to best practice.
• Capable of operating a forklift, overhead crane, and/or man lift according to company policy.
• Flexibility to adjust work hours per plant needs and on call 24/7

Qualifications: BS in Electronics Engineering Technology with 10 years of Experience

• ISA Certified Control Systems Technician (CCST).
• Experience in the instrumentation field.
• Instrument technician with experience in the petrochemical industry.
• Experience in wiring and panel construction.
• Instrumentation and controls design experience.
• Instrumentation, metrology and calibration experience.
• Knowledge of computers, software, computerized control systems, and interfacing instrument control systems.
• Strong communication and problem-solving skills.
• Ability to read and interpret interconnection diagrams, process and instrumentation flow sheets, loop sheets, and schematics.
• Ability to troubleshoot, repair, and calibrate electronic equipment and controls, pneumatic equipment and controls, and advanced analytical and laboratory equipment.
• Ability to work productively with limited supervision.
• Ability to work in a team-based environment.
• Ability to use instrumentation test equipment.
• Ability to use hand and power tools.
• Ability to read small print, see all colors, and have good manual dexterity and coordination.
• Willingness to keep up to date with new technology.
• Must be committed to following and supporting safety practices.

Qualifications: BS in Automation Technology with 7 years of Experience

• Proficiency in AutoCAD experience
• Extensive knowledge of computer programs, including MS Office applications (Word, Excel, PowerPoint, and Outlook)
• Knowledge about the practical application of electrical engineering concepts
• Knowledge about the tools used in the development and repair of electrical equipment
• Knowledge about the safety precautions involved while working with high-power electrical equipment
• Knowledge about the codes, rules, regulations, and standards of electrical equipment
• Must have basic computer skills, including MS Office applications (e.g., MS Outlook, MS Excel)
• Basic math skills, which include the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, fractions, and decimals
• Ability to multitask and remain flexible. 
• Ability to communicate effectively in verbal and written form, and collaborate effectively with others on the team.
• Ability to detect electronic malfunctions and repair them immediately
• Ability to effectively use electronic repair tools and testers
• Must be willing to work overtime hours, especially during plant outages and scheduled turnarounds on weekends and holidays
• Detail-oriented with problem-solving skills, and able to organize and prioritize work assignments

Qualifications: BS in Mechatronics Engineering with 5 years of Experience

• Experience as an Instrument Technician with large offshore fixed or floating projects involving multiple disciplines.
• Good understanding of process instrumentation
• Good knowledge of process control systems
• Good knowledge of fire and gas detection and ESD systems
• Good knowledge of HART Communications Protocol
• Good working knowledge of MOD BUS Communications
• Clear understanding of cause and effect logic diagrams
• Excellent communication and interpersonal skills with the ability to communicate at all levels within the organisation.
• Ability to transform problems into solutions with an achievable outcome.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Qualifications: BS in Industrial Technology with 11 years of Experience

• General understanding of electrical circuitry, a basic understanding of electronics, and/or an understanding of mechanical systems
• Understanding of good safety practices and a demonstrated history of safe conduct.
• Good understanding of laboratory equipment operations and troubleshooting.
• Established proficiency in troubleshooting and problem-solving.
• Effective interpersonal skills with a good “customer service” attitude for interactions with clients. 
• Good written and verbal communication skills for reporting of information to the Jackson Lab community.
• Proficiency in using computers (both Mac and PC) and various software packages, e.g., Word, Excel, Data Management Systems, CAD, etc.
• Good reasoning and problem-solving skills. 
• Must have the ability to perform physical tasks regularly, including manipulating heavy or bulky scientific equipment.
• Must be comfortable interacting with a wide range of users and service providers, and must be comfortable working in and effectively contributing to a team operational environment.
• Ability to troubleshoot, repair, and calibrate electronic/pneumatic equipment and controls, advanced analytical and laboratory equipment
• Self-motivation, teamwork, open communication, resolving problems, concern for others, dependability, and punctuality

Qualifications: BS in Control Systems Engineering with 3 years of Experience

• Experience in industrial manufacturing maintenance.
• Experience with Allen-Bradley PLCs.
• Understands symbols on P&IDs and tag references on line layout drawings.
• Electrical/electronic troubleshooting and repair skills.
• Be able to use RS Logix 5000, RS Logix 500, or RS Logix 5 software for machine troubleshooting.
• Be able to go online with Control Logix, Compact Logix, SLC500, or PLC5 using either Ethernet I/P, DH+, or RS232.
• Be able to read and understand electrical schematics.
• Be able to use a multimeter and work in control panels with up to 480VAC.
• Be able to replace and configure AB Powerflex 40, 400, and 525 VFDs (Variable Frequency Drives) and Yaskawa V1000 and P1000 VFDs.
• Be able to replace Panelview and download the application using Panelbuilder 32.
• Be able to replace Panelview Plus and download the application using RS View Studio Machine Edition.

Qualifications: BS in Mechanical Engineering with 8 years of Experience

• Direct experience in instrumentation/calibration-related work.
• Practical experience with instruments, electrical and/or mechanical systems, as well as computer-controlled equipment.
• Experience working in a cGMP environment.
• Experience working with established GMP procedures in the calibration and maintenance of utility, process and lab equipment.
• Experience with computer programming and/or programmable logic controllers.
• Experience with building automation systems.
• Experience with multi-site building operations. 
• Experience working with CMMS (Computerized Maintenance Management System - Maximo).
• Excellent communication and customer service skills.
• Basic computer skills, including a working knowledge of MS Office programs.
• Ability to perform all work using the proper personal protective equipment (PPE) and in strict accordance with all applicable safety policies, procedures and practices.
• Ability to read and understand technical documents such as operating manuals and architectural/mechanical/electrical/P&ID drawings
• Ability to troubleshoot, systematically identify, analyze and solve maintenance problems 
• Ability to work in cramped spaces such as closets, crawl spaces, attics, vaults, etc. 
• Ability to work effectively as both an individual contributor and a valued team member.
• Ability to effectively organize, prioritize and multitask work assignments required.
• Ability to accurately and thoroughly complete GMP documentation and fully comply with all applicable policies, procedures, and practices.

Qualifications: BS in Biomedical Engineering with 7 years of Experience

• Process maintenance experience related to Instrument Technology
• Experience in the Manufacturing/Chemicals/FMCG industry
• Experience with all types of analyzers. 
• Experience in troubleshooting equipment failures and examining process conditions/impacts to recommend improvements
• Understanding of analyzer communication networks, fiber optic systems, and hardware
• Ability to accommodate overtime and split-shift hours
• Ability to read equipment prints, secure information from OEM manuals, and proficiency with measurement tools
• Ability to define problems, collect data, establish facts, and draw conclusions in challenging technical situations
• Ability to read schematic drawings or product manuals to repair parts
• Detailed, task-oriented individual regarding work.
• Proficient in computer skills, demonstrated effective interpersonal and communication skills, both verbal and written. 

Qualifications: BS in Engineering Physics with 5 years of Experience

• Electrical Safety Rules (including TLM015 and Electricity at Work Regs)
• Previous experience with Maximo or similar CMMS
• Experience with a wide variety of process instrumentation, including flow, pressure, level, temperature, and analytical.
• Experience in sizing and specifying control valves. 
• Experience with instrumentation management systems.
• Knowledge of instrumentation requirements related to process unit operations.
• Strong organization skills, as well as excellent communication, interpersonal, and leadership skills.
• Be able to accomplish results by working independently and in teams, working effectively with others at all levels of the plant organization.
• Must be able to respond quickly to changing requirements and be capable of working in hot and cold temperatures.
• Computer literate, including use of the Microsoft Office suite

Qualifications: BS in Applied Science with 7 years of Experience

• Core Trade NSVQ (Level 3) Certification
• Experience in computer analog and digital circuit manufacturing environments.
• Industrial experience in the pharmaceutical industry
• Knowledge of the application of electric instruments and temperature/humidity controls.
• Proficient in Word, Excel, PowerPoint, and SAP
• Excellent knowledge of industrial electricity and pneumatics
• Excellent knowledge of computers and computer skills
• Basic reading, writing and verbal skills
• Advanced use of tools and equipment
• Ability to Gown for Manufacturing
• Ability to read electrical schematics and blueprints

Qualifications: BS in Manufacturing Engineering with 5 years of Experience

• Maintenance or Manufacturing Experience
• Experience within a regulated industry, FDA-regulated industries 
• Experience in providing a high level of customer service
• Knowledge of the troubleshooting process related to equipment failures
• Ability to perform quality work without close supervision
• Proficiency in CMMS (e.g., GMARS), Microsoft Word, and Microsoft Excel.
• Ability to follow written procedures while performing maintenance activities
• Ability to work in a team environment.
• Track record of maintaining a neat and orderly work area (good housekeeping)
• Good documentation practices and communication skills (both written and verbal)
• Willingness to work outside of craft

Qualifications: BS in Electronics and Communications Engineering with 4 years of Experience

• Experience in troubleshooting and repairing electronic equipment
• Experience in Biologics manufacturing
• Experience in the maintenance, repair and calibration of pneumatic, hydraulic or mechanical and low-voltage electrical control components/systems
• Working knowledge of company G.M.P.s
• Computer skills and knowledge of MS Office
• Good communication skills, Good interpersonal skills
• Demonstrated Initiative, self-motivation
• Good planning and organizational skills
• Analytical problem-solving skills
• Bilingual in both French and English
• Ability to work independently as well as in a team environment

Qualifications: BS in Electrical and Computer Engineering with 5 years of Experience

• Electrical and instrumentation experience
• Experience and knowledge of hydrocarbon processing systems and utilities.
• Good experience of Permit to Work, Instrument/Mechanical Isolation Standards and Risk Assessment.
• Strong field instrumentation troubleshooting skills.
• Expert knowledge of electrical instrumentation functions.
• Working knowledge of DCS systems.
• Expert knowledge of electrical equipment and tools.
• Ability to read, write and interpret wiring and circuit diagrams.
• Ability to read and understand safety rules.
• Good oral and written communication and interpersonal skills.
• Time management, organizational and prioritizing skills.

Qualifications: BS in Chemical Engineering with 9 years of Experience

• Process instrumentation/electrical maintenance experience in industry 
• Instrumentation-related experience in the Oil & Gas/Petrochemical industry.
• Experience in performing maintenance of Gasification/SMR/Air Separation unit or Hydrogen/Carbon Monoxide plant
• Good knowledge of using/ operating smart positioners, including Fisher DVC, Flowserve Logix, and Siemens PS2.
• Familiar with using HART communicator, Multimeter, Loop calibrator, Pressure calibrator, GWR type level measurement and Nucleonic level measurement.
• Must be proficient in troubleshooting using loop drawing, schematics, ladder logic, electrical one-line, and P&I drawings.
• Proficient in maintaining process control loops, electronic controls, valves, and transmitters.
• Ability to work overtime, weekends, and holidays.
• High proficiency in Microsoft applications.
• Ability to read, write, and speak in English.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills, including the ability to work as part of a team.

Qualifications: BS in Process Engineering Technology with 10 years of Experience

• Experience from industrial instrumentation.
• Previous experience in maintenance or production
• Experience from working with the Beamex calibration system and the CMX database
• Knowledge of working with preventive maintenance, yearly calibration testing and documentation.
• Good technical knowledge of instrumentation, automation, and DCS systems.
• Strong understanding of cultural fit and its implications
• Elementary computer literacy (Word, PowerPoint, Excel)
• Service-minded and determined to create a great working environment
• Strong technical aptitude with hands-on troubleshooting and repair skills.
• Strong attention to detail.
• Strong communication and interpersonal skills.

Qualifications: BS in Environmental Engineering with 5 years of Experience

• Previous experience on a Gas processing COMAH site, LNG or FPSO site.
• Experience with Microsoft Office products and Computerised Maintenance Management Systems (CMMS)
• Knowledge of hydrocarbon/Industrial production systems and associated hazards
• Good understanding of process instrumentation
• Good knowledge of process control systems
• Good knowledge of fire and gas detection and ESD systems
• Clear understanding of cause and effect logic diagrams
• Fully familiar with the permit-to-work system and isolation procedures
• Good knowledge of SAP.
• Good verbal, written and problem-solving skills
• Strong attention to detail and a focus on achieving objectives in the safest and efficient manner
• Be able to work flexibly as part of a team on own initiative, with little supervision
• Be able to carry out all activities safely and efficiently to agreed work plans, safety management system requirements and best working practices by the supervisor
• Be able to complete work history/reports to the required standard as outlined by the supervisor

Qualifications: BS in Maintenance Engineering with 10 years of Experience

• Certificate III/IV in Sterilisation Services or the willingness 
• Experience in CSSD sterilisation and instrument processing.
• Experience in instrument assembly, service, and/or testing.
• Experience with fluidic, electric, optic, and/or mechanical instruments.
• Understanding of, and commitment to, quality improvement.
• Demonstrated effective documentation skills.
• Demonstrated effective listening and verbal skills.
• Ability to relate well to other staff and to be an effective team member.
• Ability to apply Infection Control Standards and Occupational Health and Safety standards.
• Ability to work independently, strong communication, organizational and interpersonal skills.

Qualifications: BS in Power Systems Engineering with 4 years of Experience

• Experience installing and operating instrumentation systems, or equivalent experience
• Experience with calibration and troubleshooting of industrial plant instrumentation and controls
• Knowledge of PLC and DCS controls 
• Thorough knowledge of various sensor types and their application
• Strong attention to detail and ability to maintain focus for the entirety of the shift.
• Ability to react well under pressure in high-stress situations, and accept responsibility for one's own actions.
• Ability to build professional and courteous relationships with colleagues and supervisors
• Must be able to work independently and as part of a diverse interdisciplinary team
• Ability to learn new processes and tasks quickly and efficiently
• Flexibility and availability to work a rotating roster across 24/7
• Ability to communicate effectively across technical, operations and maintenance lines

Qualifications: BS in Industrial Automation with 7 years of Experience