Job Summary: 

• Complete work orders for interior and exterior painting using brushes, spray guns, or rollers
• Prepare surfaces for painting, including but not limited to removing old paint, smoothing surfaces, and filling nail holes, cracks, and joints
• Prepare the area for painting, such as moving or covering furniture and fixtures, taping, and laying down drop cloths
• Inventory paint equipment and supplies
• Store paint and related chemicals in accordance with company safety policies
• Establish and maintain effective working relationships
• Provide superior customer service
• Consistently practice and maintain the highest standards of professionalism when interacting with residents, retailers, and fellow employees

Skills on Resume: 

• Surface Preparation (Hard Skills)
• Painting Techniques (Hard Skills)
• Equipment Inventory (Hard Skills)
• Chemical Storage (Hard Skills)
• Team Collaboration (Soft Skills)
• Customer Service (Soft Skills)
• Professional Conduct (Soft Skills)
• Work Relationships (Soft Skills)

Job Summary: 

• Be responsible for performing all assigned painting and blasting duties in a professional manner
• Assist in performing inside and outside painting and blasting duties in a productive manner to include
• Prepare surfaces before painting
• Apply specified coatings of paint
• Prepare paint and blast by mixing components accurately
• Perform all activities in accordance with all federal, state, and local laws and regulations
• Utilize standard blast and paint equipment such as conventional and airless spray equipment, motorized lifts, brushes, rollers, and other related equipment
• Review paint manufacturer specs in addition to customer requirements and apply
• Dispose of residual materials appropriately

Skills on Resume: 

• Painting Duties (Hard Skills)
• Blasting Duties (Hard Skills)
• Surface Preparation (Hard Skills)
• Coating Application (Hard Skills)
• Paint Mixing (Hard Skills)
• Equipment Operation (Hard Skills)
• Specification Review (Hard Skills)
• Material Disposal (Hard Skills)

Job Summary: 

• Mix and apply all types of paint and make adjustments to achieve a quality paint job
• Touch up to correct any faults
• Maintain painting equipment and area
• Prep materials to be painted by taping, washing, or using other approved methods
• Maintain inventory of paint equipment and notify supervisor of shortages
• Observe all environmental, health, and safety rules
• Maintain regulatory environmental records
• Ensure proper operation of the neutralization system and paint booth
• Assemble components and equipment

Skills on Resume: 

• Paint Application (Hard Skills)
• Touch Up (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Material Preparation (Hard Skills)
• Inventory Management (Hard Skills)
• Safety Compliance (Soft Skills)
• Record Keeping (Hard Skills)
• System Operation (Hard Skills)

Job Summary: 

• Set up and operate paint equipment
• Mix paint according to specifications to regulate customer-specified color, consistency, and quality
• Maintain paint equipment to ensure that it is functioning properly
• Remove grease, dirt, paint, or rust from the surface in preparation for paint application using solvents or washing tanks
• Inspect painted units for runs, sags, and unpainted areas to ensure that painted areas match quality specifications
• Perform all quality control tests
• Maintain the booth, including filter changes and cleaning excess paint fromthe  walls and stack
• Maintain a safe and clean working environment by complying with procedures, rules, and regulations

Skills on Resume: 

• Equipment Operation (Hard Skills)
• Paint Mixing (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Surface Cleaning (Hard Skills)
• Quality Inspection (Hard Skills)
• Quality Testing (Hard Skills)
• Booth Maintenance (Hard Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Clean grease and dirt from parts
• Apply masking tape over parts and areas that are not to be coated
• Select and mix the coating liquid to produce the desired color
• Pour coating liquid into the spray container and connect the gun to the air hose
• Turn the sprayer valves and nozzle to regulate the width and pressure of the spray
• Pull the trigger and direct the spray onto the work surface to apply the prime or finish coat
• Coat areas inaccessible to the hand sprayer with a brush
• Clean spraying equipment and brushes with solvent
• Remove rust from metal with acid, a wire brush, or steel wool
• Conduct other fabrication tasks such as drilling, cutting, and press operations on occasion
• Carry out work according to safety standards and regulations
• Maintain the cleanliness and organization of the work area

Skills on Resume: 

• Surface Cleaning (Hard Skills)
• Masking Application (Hard Skills)
• Coating Mixing (Hard Skills)
• Spray Operation (Hard Skills)
• Brush Coating (Hard Skills)
• Equipment Cleaning (Hard Skills)
• Fabrication Tasks (Hard Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Use standard spray equipment, including conventional pot sprayer, air-assisted airless, and airless paint sprayer, to apply coatings, primer, and topcoats to industrial equipment
• Prepare the equipment surface, clean, and mask prior to the application of coatings
• Be responsible for cleaning and maintaining the spray equipment and the paintwork area
• Apply various markings to equipment, including decals
• Manage paint waste by disposing of it in the correct waste containers
• Manage stock levels of paint material
• Load and unload materials and equipment onto or from delivery trucks
• Assign the correct location for received materials and equipment
• Assign job numbers for received materials and equipment
• Communicate received materials and equipment to relevant personnel including the direct supervisor, team members, and service
• Perform a weekly stock take of high-consumed inventory of steel, electrical components, and painting material
• Communicate inventory details to the admin for re-order
• Operate 10T–5T forklift, overhead cranes, and scissor lift

Skills on Resume: 

• Spray Operation (Hard Skills)
• Surface Preparation (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Marking Application (Hard Skills)
• Waste Management (Hard Skills)
• Inventory Management (Hard Skills)
• Material Handling (Hard Skills)
• Equipment Operation (Hard Skills)

Job Summary: 

• Mix coating paints to the desired ratios and prepare spraying equipment, such as cleaning or adjusting spray guns
• Take direction from the group leader and follow the assignments
• Read and understand technical documents such as paint mixing procedures, and maintain sprayer equipment in working condition
• Clean spraying equipment with solvent or other recommended cleaning solutions on a daily basis
• Maintain the paint mix room in a clean condition while following the company safety policies
• Use the breathing air supply system when spraying epoxy paints
• Maintain proper respirator care and operation
• Prepare parts for spray painting when not engaged in painting activities

Skills on Resume: 

• Paint Mixing (Hard Skills)
• Task Following (Soft Skills)
• Document Reading (Hard Skills)
• Equipment Cleaning (Hard Skills)
• Room Maintenance (Hard Skills)
• Air System Use (Hard Skills)
• Respirator Care (Hard Skills)
• Part Preparation (Hard Skills)

Job Summary: 

• Operate assigned equipment
• Participate in continuous improvement activities
• Support the Honeywell Operating System
• Maintain the work area for operation and cleanliness
• Comply with all safety rules
• Record and report production data and complete necessary paperwork
• Analyze data and production reports
• Set up and change over equipment
• Load, hang hooks, label, unload, scan, and paint
• Provide utility support by hanging parts and, once parts are painted, removing and stacking them to take to assembly

Skills on Resume: 

• Equipment Operation (Hard Skills)
• Process Improvement (Soft Skills)
• System Support (Hard Skills)
• Workplace Maintenance (Hard Skills)
• Safety Compliance (Soft Skills)
• Data Reporting (Hard Skills)
• Data Analysis (Hard Skills)
• Utility Support (Hard Skills)

Job Summary: 

• Paint large products in a commercial facility
• Paint the interior and exterior of commercial buildings
• Clean and prepare surfaces prior to layering paint
• Prep surfaces by filling in holes, cracks, and sanding
• Maintain technical equipment for the job and ensure that it is in working order
• Safely dispose of chemical waste
• Ensure that high safety standards are met
• Utilize different painting techniques based on the nature of the surface
• Utilize special safety equipment, such as painting goggles
• Use viscosity cups and thickness gauges to measure the amount of paint to be used and the texture of the paint
• Mix and match paint colors and other finishes for touch-ups and small projects to job specifications
• Remove previous paint surfaces using masking or a chemical rinse
• Paint small items and do touch-ups
• Ensure proper ventilation after the paint is applied
• Utilize electroplating equipment to coat metal
• Polish metallic surfaces
• Paint over woods and plastics
• Apply primer and other sealers to paint surfaces
• Set up scaffolding, cover trim, floors, and other surfaces with masking tape, drop cloths, and other protective coverings to keep them free of paint

Skills on Resume: 

• Commercial Painting (Hard Skills)
• Surface Preparation (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Waste Disposal (Hard Skills)
• Safety Compliance (Soft Skills)
• Painting Techniques (Hard Skills)
• Paint Mixing (Hard Skills)
• Scaffolding Setup (Hard Skills)

Job Summary: 

• Apply layer or layers of paint and coating to a product to protect it from the elements and make it more aesthetically appealing under minimal supervision
• Prepare surfaces, clean the product, and apply coating, such as liquid paint, to various parts
• Adjust and tune application equipment to meet acceptable standards
• Inspect parts to ensure quality and properly store painted parts using an established method to minimize defects
• Use all safety equipment, such as respirators, dust masks, and all PPE, to ensure compliance with EHS policies
• Perform masking of part features perthe  TSV’s specification
• Complete move tickets for defective material and rework parts
• Work in cross-functional teams and communicate damage to equipment, part issues, and quality concerns
• Use shop-related tools and equipment

Skills on Resume: 

• Paint Application (Hard Skills)
• Surface Preparation (Hard Skills)
• Equipment Adjustment (Hard Skills)
• Quality Inspection (Hard Skills)
• Safety Compliance (Soft Skills)
• Part Masking (Hard Skills)
• Defect Handling (Hard Skills)
• Team Communication (Soft Skills)

Job Summary: 

• Assist with selecting coating systems and equipment
• Ensure material, equipment, and other specifications are understood and followed
• Ensure that metal surface preparation procedures for painting are followed
• Ensure stainless steel and aluminum polishing procedures are followed
• Ensure industrial coatings are properly prepared and applied
• Perform proper start-up, use, and shut-down procedures of painting equipment
• Apply correct paint millage to metal surfaces
• Operate or learn powder coating systems
• Ensure that materials are properly stocked, stored, and disposed of
• Comply with all OSHA policies and procedures during the course of work

Skills on Resume: 

• Coating Selection (Hard Skills)
• Specification Compliance (Hard Skills)
• Surface Preparation (Hard Skills)
• Metal Polishing (Hard Skills)
• Coating Application (Hard Skills)
• Equipment Operation (Hard Skills)
• Paint Measurement (Hard Skills)
• Powder Coating (Hard Skills)

Job Summary: 

• Clean the grease and dirt from the product
• Apply masking tape over parts and areas that are not to be coated
• Fill cavities and dents with putty to attain a smooth surface
• Select and mix the coating liquid to produce the desired color
• Pour coating liquid into the spray container and connect the gun to the air hose
• Turn the sprayer valves and nozzle to regulate the width and pressure of the spray
• Pull the trigger and direct the spray onto the work surface to apply the prime or finish coat
• Coat areas inaccessible to the hand sprayer with a brush
• Clean spraying equipment and brushes with solvent
• Heat and spray wax onto products after they are tested
• Remove rust from metal with acid, a wire brush, or steel wool

Skills on Resume: 

• Surface Cleaning (Hard Skills)
• Masking Application (Hard Skills)
• Surface Filling (Hard Skills)
• Coating Mixing (Hard Skills)
• Spray Operation (Hard Skills)
• Brush Coating (Hard Skills)
• Equipment Cleaning (Hard Skills)
• Rust Removal (Hard Skills)

Job Summary: 

• Unload equipment and rigging from the work shack
• Assist in setting up rigging, scaffold, and equipment
• Assist in rigging the tower with instructions
• Run blast pots and paint pumps
• Prepare surfaces for painting including pressure washing, sandblasting (light), and sand removal from the interior of the tank
• Document and inspect personal safety equipment daily including steel-toe work boots
• Check rigging daily for proper setup and secure attachment points
• Be responsible for completing own timecard
• Operate and fuel up compressors and welders
• Assist with the inspection of prepared and painted surfaces using wet mill gauge and dry mill gauge
• Unrig, load, and secure equipment on trailers when the job is completed
• Keep the ground, truck, trailer, and job shack organized and clean
• Communicate with the foreman on tasks to be done and the proper procedure

Skills on Resume: 

• Equipment Rigging (Hard Skills)
• Surface Preparation (Hard Skills)
• Blast Operation (Hard Skills)
• Equipment Inspection (Hard Skills)
• Compressor Operation (Hard Skills)
• Surface Measurement (Hard Skills)
• Workplace Organization (Soft Skills)
• Task Communication (Soft Skills)

Job Summary: 

• Follow safety instructions, rules, and regulations
• Prepare surfaces using industrial materials and machinery
• Perform abrasive blasting with high-pressure hoses, nozzles, and other tools
• Perform a variety of routine, non-machine tasks such as installing and removing containment systems and tarps, rigid containment, erecting scaffolding, fall protection systems, and safety barriers in line with safe work procedures
• Paint using plural, conventional, and airless spray equipment, brushes, and rollers
• Lift, carry, and hold building materials, tools, and supplies
• Mix and apply paints and solvents using hand and power tools
• Use machinery such as paint pumps, blast pots, recyclers, tele-handlers or forklifts, aerial boom lifts, scissor lifts, and other power tools or equipment
• Install and dismantle ventilation systems
• Clean tools, equipment, materials, and work areas
• Clean down manufacturing and paint equipment with solvents and a power washer

Skills on Resume: 

• Safety Compliance (Soft Skills)
• Surface Preparation (Hard Skills)
• Abrasive Blasting (Hard Skills)
• Containment Setup (Hard Skills)
• Spray Painting (Hard Skills)
• Material Handling (Hard Skills)
• Paint Mixing (Hard Skills)
• Equipment Operation (Hard Skills)

Job Summary: 

• Select proper paints such as enamel, lacquer, or epoxy, and solvents from the storage area for units requiring painting
• Add thinner to paints for proper viscosity
• Requisition or order paints
• Fill and secure spray pots
• Check workpiece surfaces for dirt, moisture, rust, or scratches and repair and rework minor surface imperfections
• Tape or mask equipment to prevent overspray
• Move and properly position work in the spray area
• Operate the spray gun to paint products with uniform finish coatings of paint in various colors and textures to achieve the proper quality level of the type of product
• Maintain painting equipment and replace parts
• Utilize portable units to paint machines in the sawmill
• Follow safety rules and keep the area in a clean and orderly condition

Skills on Resume: 

• Paint Selection (Hard Skills)
• Viscosity Adjustment (Hard Skills)
• Surface Inspection (Hard Skills)
• Masking Application (Hard Skills)
• Work Positioning (Hard Skills)
• Spray Operation (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Receive instructions and schedules from plant supervision
• Obey all safety protocols
• Operate equipment with direct supervision
• Work directly with the trainer to perform various duties
• Check all finished work for obvious defects
• Record production onto production reports
• Maintain work area and equipment in clean, orderly conditions
• Help to ensure that all finished product meets the quality standard

Skills on Resume: 

• Task Following (Soft Skills)
• Safety Compliance (Soft Skills)
• Equipment Operation (Hard Skills)
• Trainer Assistance (Soft Skills)
• Work Inspection (Hard Skills)
• Production Recording (Hard Skills)
• Workplace Maintenance (Hard Skills)
• Quality Assurance (Hard Skills)

Job Summary: 

• Coat metal products with lacquer, paint, varnish, enamel, oil, or rustproofing material
• Paint using brushes, spray guns, sanders, rollers, and other equipment
• Immerse parts in solution or wash surfaces to remove grease, rust, scale, and dirt
• Complete pre-painting process, which may include filling tanks, controlling viscosity, mixing thinner, stripping paint, sanding surfaces, and using power tools
• Verify correct paint colors by reading building prints and designs
• Spray foam insulation and undercoating in buildings
• Communicate and work with co-workers in a team-based environment
• Obtain and maintain a forklift license
• Keep a clean work area each day
• Ensure project quality within the specification

Skills on Resume: 

• Coating Application (Hard Skills)
• Painting Techniques (Hard Skills)
• Surface Cleaning (Hard Skills)
• Prepainting Process (Hard Skills)
• Color Verification (Hard Skills)
• Foam Spraying (Hard Skills)
• Team Collaboration (Soft Skills)
• Forklift Operation (Hard Skills)

Job Summary: 

• Perform quality work consistent with CAD and FAB procedures to ensure the product meets or exceeds customer expectations
• Work within the established budgets and time guidelines set by the shop superintendent
• Read and understand labels, MSDS, and product data sheets
• Operate forklift and other necessary material handling equipment
• Set up a work area to safely accommodate the size and weight of the product to be painted
• Prepare materials to proper SSPC specifications
• Inspect and document product compliance
• Handle material to maintain a quality finished product
• Load product to assist loading personnel
• Assist the shop superintendent in the training of new personnel
• Maintain paint quantities, supplies, and all consumable items for the paint area

Skills on Resume: 

• Quality Assurance (Hard Skills)
• Time Management (Soft Skills)
• Document Reading (Hard Skills)
• Forklift Operation (Hard Skills)
• Work Area Setup (Hard Skills)
• Material Preparation (Hard Skills)
• Product Inspection (Hard Skills)
• Inventory Management (Hard Skills)

Job Summary: 

• Present a team-first attitude combined with respect for the company's mission, vision, and values
• Maintain company productivity and quality standards
• Mix standard paints, acrylic enamel, and two-part acrylic urethanes to the proper color and consistency
• Prepare surfaces and mask areas for painting
• Perform preparation, including grinding, removal of splatter and rust, power washing, and degreasing
• Adjust air pressures and spray nozzle according to the types of paint and finish requirements
• Perform brush painting and touch-up
• Maintain general housekeeping and maintenance of paint spray equipment, booths, and respirators in accordance with department health and safety regulations
• Operate a forklift to move parts and equipment
• Ensure the availability of materials, anticipate requirements, and maintain current inventory

Skills on Resume: 

• Team Collaboration (Soft Skills)
• Quality Standards (Soft Skills)
• Paint Mixing (Hard Skills)
• Surface Preparation (Hard Skills)
• Equipment Adjustment (Hard Skills)
• Touch Up (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Forklift Operation (Hard Skills)

Job Summary: 

• Perform all aspects of the paint department, work with other employees as part of a team, and be prompt and on time daily for work
• Take direction from the area supervisor and follow that direction
• Read blueprints and understand them and other technical documents, such as paint mixing procedures, for the job of industrial painter
• Work in such a way as to create no or limited scrap or rework and work to continually improve the quality level
• Follow all company safety rules as laid out in the company safety manual and all other company policies
• Maintain company equipment and work areas in a clean and orderly manner
• Provide all of the proper tooling and other equipment as specified to fulfill basic job requirements
• Continually strive to improve in all aspects of job requirements
• Read blueprints and other related documents

Skills on Resume: 

• Team Collaboration (Soft Skills)
• Task Following (Soft Skills)
• Blueprint Reading (Hard Skills)
• Quality Improvement (Soft Skills)
• Safety Compliance (Soft Skills)
• Workplace Maintenance (Hard Skills)
• Tool Management (Hard Skills)
• Job Improvement (Soft Skills)

Job Summary: 

• Apply coatings through conventional, airless, and other types of spray systems
• Mix paints to desired colors and consistencies
• Perform grinding, sanding, polishing, and air-powered sandblasting to prepare surfaces
• Prepare, prime, and paint pumps, parts, and various equipment
• Mask and cover surfaces not to be painted
• Operate and maintain paint spraying equipment
• Examine finished parts or equipment to ensure proper surface prep and finished quality
• Order paint and keep equipment in a safe, clean condition

Skills on Resume: 

• Spray Application (Hard Skills)
• Paint Mixing (Hard Skills)
• Surface Preparation (Hard Skills)
• Equipment Painting (Hard Skills)
• Masking Application (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Quality Inspection (Hard Skills)
• Inventory Management (Hard Skills)

Job Summary: 

• Prep work on all steel products including sanding, grinding, seam sealing, priming, and painting
• Apply various types of industrial primers, paints, and marine coatings
• Maintain all equipment pertaining to the paint booth area
• Stock all materials relevant to paint and finish work
• Assist in the production phase of the product if no paint work is available
• Perform occasional automotive paint work, body work, primer, and Bondo applications
• Read, understand, and follow the technical data sheets provided with products
• Be responsible for reading and recording atmospheric conditions during each phase of the application process
• Record material usage on the worksheet provided with the work order traveler
• Supervise when other employees are involved in the finish area to make sure that all work is done to meet appearance standards

Skills on Resume: 

• Surface Preparation (Hard Skills)
• Coating Application (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Material Stocking (Hard Skills)
• Production Support (Soft Skills)
• Automotive Painting (Hard Skills)
• Data Sheet Reading (Hard Skills)
• Work Supervision (Soft Skills)

Job Summary: 

• Place drop sheets to protect adjacent areas from paint splattering
• Prepare surfaces by removing old paint, filling holes and cracks, smoothing, and sealing surfaces
• Select and prepare paints to the required colours by mixing portions of pigment, oil, and thinning and drying additives
• Apply paints using brushes, rollers, and sprays
• Grind, sand, and smooth the surfaces of items to be painted
• Load paint and mix paint into the spray equipment
• Connect hoses to spray equipment and adjust spray nozzles to the required pressure
• Secure items to be sprayed within the spray booths
• Direct spray guns to apply even coatings
• Set up abrasive blast equipment for operations

Skills on Resume: 

• Surface Protection (Hard Skills)
• Surface Preparation (Hard Skills)
• Paint Mixing (Hard Skills)
• Paint Application (Hard Skills)
• Surface Smoothing (Hard Skills)
• Spray Setup (Hard Skills)
• Spray Operation (Hard Skills)
• Blast Setup (Hard Skills)

Job Summary: 

• Maintain good attendance and reliability
• Read and understand shop drawings and shop orders with regard to surface preparation, painting requirements, and no-paint areas
• Have working knowledge of liquid measurements including pint, ounce, quart, and gallon
• Understand and convert percentages
• Understand the verification of quantity, piece mark, job number, sequence number, and paint codes on the left to load sheets
• Make sure that each piece is clearly and accurately marked with the piece mark, job number, and sequence number, whether painted or not
• Make sure that the marks are in the correct location
• Accurately mix and apply chemical paints using two-part and three-part coatings
• Apply coatings to the required dry film thickness on the shop drawing or shop order
• Make sure that the paint is free of runs and no overspray on other materials
• Follow AISC Procedure 406 control of surface preparation, temperature, and humidity during coating
• Qualify to paint in accordance with AISC Procedure 413, coatings applicator and qualification

Skills on Resume: 

• Attendance Reliability (Soft Skills)
• Drawing Reading (Hard Skills)
• Measurement Knowledge (Hard Skills)
• Percentage Conversion (Hard Skills)
• Marking Accuracy (Hard Skills)
• Paint Mixing (Hard Skills)
• Coating Application (Hard Skills)
• Procedure Compliance (Hard Skills)

Job Summary: 

• Perform routine maintenance checks and maintenance such as torch tips
• Describe and diagnose the current paint sprayer issue
• Be responsible for the surrounding environment and be safety oriented within this environment
• Operate a pendant or remote-controlled bridge crane safely and efficiently
• Maintain good housekeeping by keeping the area neat and orderly at all times
• Speak and understand enough English to accurately follow basic instructions
• Accurately and properly clock in and out on all different jobs and all shop orders worked on
• Work required hours to help meet the production schedule and satisfy the needs of internal customers
• Understand the verification of the job number, sequence number, and release number
• Operate the blaster and have knowledge of each function of the blaster
• Be responsible for routine maintenance checks, including blaster shot refill and grease joints

Skills on Resume: 

• Equipment Maintenance (Hard Skills)
• Issue Diagnosis (Hard Skills)
• Safety Awareness (Soft Skills)
• Crane Operation (Hard Skills)
• Housekeeping Maintenance (Soft Skills)
• Instruction Following (Soft Skills)
• Time Recording (Hard Skills)
• Blaster Operation (Hard Skills)

Job Summary: 

• Mix paint colors and finishes
• Mask, remove, cover, or otherwise protect hardware, trim, and other nonpainted surfaces
• Apply paint to surfaces using brushes, rollers, sprayers, airbrushes, stencils, and other tools
• Comply with chemical and waste storage and disposal regulations and best practices
• Load and unload product from a powered overhead conveyor
• Perform some packaging and forklift operations
• Maintain a clean work area
• Follow instructions and provide consistent work
• Read a tape measure and use basic math skills

Skills on Resume: 

• Paint Mixing (Hard Skills)
• Surface Masking (Hard Skills)
• Paint Application (Hard Skills)
• Waste Compliance (Soft Skills)
• Conveyor Operation (Hard Skills)
• Forklift Operation (Hard Skills)
• Workplace Maintenance (Hard Skills)
• Instruction Following (Soft Skills)

Job Summary: 

• Use standard spray equipment, including conventional pot sprayer, air-assisted airless, and airless paint sprayer, to apply coatings, primer, and topcoats to industrial equipment
• Prepare the equipment surface, clean, and mask prior to the application of coatings
• Clean using a water-based and biodegradable degreaser
• Clean and maintain spray equipment and the paint work area
• Apply various markings to equipment, including decals
• Manage paint waste by disposing in the correct waste containers
• Complete the setup of equipment, fans, and shields
• Touch up, reworked or changed parts on the fly
• Keep track of all paint materials and ensure paint is ordered through the plant manager

Skills on Resume: 

• Spray Operation (Hard Skills)
• Surface Preparation (Hard Skills)
• Degreasing Cleaning (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Marking Application (Hard Skills)
• Waste Management (Hard Skills)
• Equipment Setup (Hard Skills)
• Paint Tracking (Hard Skills)

Job Summary: 

• Complete and direct various painting tasks of machines and parts
• Prepare paint by mixing paints, enamel, or lacquer
• Maintain the correct paint consistency or viscosity required for spraying
• Prepare surfaces beforehand by scraping, sanding, or removing old finishes and using patching materials
• Have knowledge of paints appropriate for various applications
• Be responsible for the inspection of own work as well as the inspection of other paint shop employees
• Handle the normal day-to-day stress of the job and get along reasonably well with co-workers
• Maintain regular attendance and punctuality
• Take and adhere to all health and safety precautions
• Safely run power tools, including blast pot, grinder, mobile equipment, airless, and conventional

Skills on Resume: 

• Painting Tasks (Hard Skills)
• Paint Mixing (Hard Skills)
• Viscosity Control (Hard Skills)
• Surface Preparation (Hard Skills)
• Paint Knowledge (Hard Skills)
• Work Inspection (Hard Skills)
• Team Collaboration (Soft Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Clean surfaces before layering paint
• Maintain technical equipment for the job
• Safely dispose of chemical waste
• Ensure that high standards are met
• Utilize different painting techniques
• Utilize special safety equipment
• Measure the amount of paint to be used and the texture of the paint
• Paint small items and complete touch-ups
• Ensure proper ventilation after the paint is applied

Skills on Resume: 

• Surface Cleaning (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Waste Disposal (Hard Skills)
• Quality Standards (Soft Skills)
• Painting Techniques (Hard Skills)
• Safety Equipment (Soft Skills)
• Paint Measurement (Hard Skills)
• Touch Up (Hard Skills)

Job Summary: 

• Prep, mix, spray, maintain, and tear down an industrial paint setup
• Have knowledge in surface preparation of steel in accordance with the applied coatings
• Respect and achieve deadlines for projects
• Ensure the quality condition of equipment and tools
• Troubleshoot problems with equipment, people, and processes
• Maintain a clean work area
• Have working knowledge of pressure pot, air-assist, and airless sprayers
• Apply enamel paint as specified in project work orders
• Mix and match colors of paint, stain, or varnish with oil or thinning and drying additives to obtain the desired color and consistency

Skills on Resume: 

• Paint Setup (Hard Skills)
• Surface Preparation (Hard Skills)
• Deadline Management (Soft Skills)
• Equipment Maintenance (Hard Skills)
• Problem Solving (Soft Skills)
• Workplace Maintenance (Hard Skills)
• Sprayer Knowledge (Hard Skills)
• Color Matching (Hard Skills)

Job Summary: 

• Learn and perform in-process and final testing on products, routine equipment maintenance, and limited troubleshooting
• Support the work of those assigned to the finish department to help in the painting and finishing effort, including sandblasters, helpers, and general laborers
• Ensure that parts and assemblies are cleaned and prepped, primed, and painted in accordance with shop drawings and cut sheets, including manufacturing instructions
• Monitor paint inventory control
• Remove old paint and paint equipment
• Mix colors to obtain the desired color or consistency
• Complete basic prep, cut, grind, sandblast, prime, and paint material
• Move from project to project with minimal supervision
• Work closely with shop management

Skills on Resume: 

• Product Testing (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Team Support (Soft Skills)
• Surface Preparation (Hard Skills)
• Inventory Control (Hard Skills)
• Paint Mixing (Hard Skills)
• Material Painting (Hard Skills)
• Task Independence (Soft Skills)

Job Summary: 

• Paint and apply finishing coats in accordance with blueprints and customer specifications
• Set up and maintain work areas and operate painting equipment in accordance with safety procedures
• Ensure that all components are produced and coated efficiently and are consistent with company's established goals for quality and customer order on-time performance
• Load and unload parts or products onto fixtures
• Maintain clean work areas, tool repair, and equipment inventory
• Inspect paint jobs and materials, adjust colors, and fix defects
• Read blueprints and instructions and examine surfaces to determine the kind and amount of work necessary
• Make on-site preparations such as building scaffolding and covering fixtures
• Clean and organize the area to 5S standards established

Skills on Resume: 

• Paint Application (Hard Skills)
• Equipment Operation (Hard Skills)
• Quality Assurance (Hard Skills)
• Material Handling (Hard Skills)
• Workplace Maintenance (Hard Skills)
• Color Adjustment (Hard Skills)
• Blueprint Reading (Hard Skills)
• Scaffolding Setup (Hard Skills)

Job Summary: 

• Apply various finishes to heavy equipment, buildings, and other items
• Prep, including cleaning, scraping, sanding, priming, or sealing surfaces prior to painting
• Properly care for tools and safely use and handle paint, solvents, and adhesives
• Work with a variety of tools such as sanders, grinders, needle guns, and others
• Maintain a clean work environment
• Meet deadlines in a timely and safe manner
• Paint metal weldments and assemblies
• Use drawings, specs, and verbal instructions
• Exercise judgment and experience to plan and accomplish goals
• Paint fabricated products, as well as cut steel using industrial painting equipment
• Prepare industrial equipment for painting, ensuring a smooth surface using sandpaper, brushes, steel wool, sanding machines, and solvents
• Apply primer or sealers to prepare the paint surface for finishing coats

Skills on Resume: 

• Finish Application (Hard Skills)
• Surface Preparation (Hard Skills)
• Tool Handling (Hard Skills)
• Equipment Operation (Hard Skills)
• Workplace Maintenance (Hard Skills)
• Time Management (Soft Skills)
• Blueprint Reading (Hard Skills)
• Primer Application (Hard Skills)

Job Summary: 

• Assure surfaces meet required blast profiles
• Mix paints and coatings per specifications
• Operate conventional and airless spray equipment to apply primers, intermediate, and final coatings in alkyds, epoxies, and water-borne paint systems
• Test the mileage of coatings, wet and dry
• Oil and clean pumps
• Clean paint lines and paint guns and perform other cleaning and preventative maintenance to ensure that painting apparatus remain in working order
• Achieve proper dry film thickness and defect-free paint jobs with no holidays, pinholes, sags, runs, or orange peel
• Work in a self-guided manner in the absence of supervision and demonstrate creativity, exercise sound judgment, and demonstrate initiative
• Report all personal injuries and EHS incidents and assist with both safety and environmental investigations
• Ensure a high standard of housekeeping is maintained in all assigned areas
• Requisition material and supplies from the stockroom, call vendors to discuss needs for parts and supplies, and recommend purchases and suppliers
• Select and mix paints to the desired color and prepare spraying equipment, such as cleaning or adjusting the spray gun
• Clean spray equipment with solvent or other recommended cleaning solutions
• Operate blasting equipment to clean steel according to specified requirements

Skills on Resume: 

• Surface Inspection (Hard Skills)
• Paint Mixing (Hard Skills)
• Spray Operation (Hard Skills)
• Coating Testing (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Defect Prevention (Hard Skills)
• Independent Work (Soft Skills)
• Housekeeping Maintenance (Soft Skills)

Job Summary: 

• Show individual competency in the mixing and application of primers and top coating to obtain the desired colour and consistency
• Apply epoxy primers and polyurethane coatings to all component parts as per the production schedule
• Operate, clean, and maintain all painting equipment, including sprayers, electrostatic sprayers, and pumps
• Mix epoxy primers and polyurethane coatings to obtain the desired color and consistency
• Examine all parts and components before and after painting, and complete quality assurance reports as per procedure
• Prepare materials, surfaces, and structures for coverage with paint, laminated rubber, or other material
• Operate conventional and airless equipment to apply industrial paint finishes on metal and other types of surfaces
• Mix and apply alkyds, epoxies, gel coats, powder coats, urethane, zinc epoxies, and water-borne paint systems according to a prescribed formula
• Follow all safety rules and practices
• Use a paintbrush to touch up any imperfections
• Mix paints and add thinners for proper consistency
• Add fasteners and adhesives to connect the various parts and form a fully assembled unit
• Install hardware such as pulls and drawer slides, and fit specialty products for glass, metal trims, and stone
• Assist with other work in the department when no materials are ready for painting or finishing

Skills on Resume: 

• Paint Mixing (Hard Skills)
• Coating Application (Hard Skills)
• Equipment Operation (Hard Skills)
• Quality Inspection (Hard Skills)
• Surface Preparation (Hard Skills)
• Spray Application (Hard Skills)
• Safety Compliance (Soft Skills)
• Assembly Support (Hard Skills)

• Job Summary: 
• Apply powder paint by the electrostatic process
• Mix paints to make them applicable and to achieve the desired properties
• Prepare part surfaces for paint application
• Diagnose and solve application, surface treatment, and paint curing problems
• Carry out quality inspections
• Make an inventory of the different paints and related components
• Set up and operate various equipment, including pressure-fed, HVLP, and airless systems
• Clean and paint parts accurately and efficiently
• Operate a variety of painting equipment and processes
• Perform daily maintenance and safety checks on all equipment and tools
• Meet requirements as listed on the applicable competency document
• Receive steel structure via motorized cart or overhead crane system
• Transport steel from the cart via the overhead crane system onto the bench rails
• Apply tape to designated sections of the steel structure
• Paint the steel structure using a spray gun
• Use high-powered compressor sprayers and metal blasters

Skills on Resume: 

• Powder Coating (Hard Skills)
• Paint Mixing (Hard Skills)
• Surface Preparation (Hard Skills)
• Problem Solving (Soft Skills)
• Quality Inspection (Hard Skills)
• Inventory Management (Hard Skills)
• Equipment Operation (Hard Skills)
• Equipment Maintenance (Hard Skills)

Job Summary: 

• Prepare and repair surfaces on manufactured or purchased products
• Spray paint, enamel, lacquer, and other industrial coatings
• Prioritize work to ensure time tables are met
• Use the appropriate tools to hang, mount, or place items for paint application
• Clean and prepare surfaces before painting
• Apply paint using a variety of techniques and tools to paint surfaces
• Use spray equipment, airbrushes, stencils, rollers, or brushes
• Maintain painting equipment and ensure proper functionality
• Troubleshoot any problems that the equipment may have
• Sandblast and prep materials for paint
• Organize and relabel with part numbers and organize into jobs after paint
• Paint all materials required, large or small, using a pressure pot

Skills on Resume: 

• Surface Repair (Hard Skills)
• Spray Painting (Hard Skills)
• Time Management (Soft Skills)
• Item Mounting (Hard Skills)
• Surface Preparation (Hard Skills)
• Paint Application (Hard Skills)
• Equipment Maintenance (Hard Skills)
• Problem Solving (Soft Skills)