• Plan, implement, and co-develop HW design and qualification projects
• Participate in all phases of the product development cycle, including design, documentation, eDVT, FA, and support for custom HW designs
• Define, implement, and automate HW validation and qualification tests
• Review, audit, and validate reports from the JDM partner and retest certain portions of the design
• Write functional specifications (HW/System level), test plans, and test reports
• Perform schematic capture of designs
• Analyze and review device and system-level power, vendor selection (design), cooling, and electrical (SI) functionality
• Improve design and qualification processes to enhance efficiency, consistency, and product robustness
• Qualify subsystems, including CPU complex, networking, power, etc.
• Perform failure and root cause analysis activities in support of system hardening efforts and customer escalations
• Work with diagnostics engineers by providing direction and reviewing test plans to ensure proper coverage
• Work closely with other team members and provide support on cross-functional projects
• Help contribute to creating a culture of quality by design
• Mentor and coach junior engineers to create a culture of world-class engineering

Skills: Hardware Design, Product Development, Hardware Validation, Technical Documentation, Schematic Capture, Power Analysis, Failure Analysis, Process Improvement

• Research and develop products from requirements gathering to initial and detailed design
• Ensure electronic/electrical/mechanical hardware design, prototyping, and testing are adequately documented according to the appropriate standards
• Ensure that products and services meet all customer needs as well as Saab’s schedule, cost, and quality.
• Safeguard the integrity of the engineering processes by following the defined processes
• Support the integration and on-site testing of assigned components
• Ensure all applicable standards and QA procedures are followed to ensure regulatory compliance.
• Adhere to health and safety rules
• Ensure to meet scheduled deadlines and report risks, problems, and delays to the supervisor

Skills: Product Research, Design Documentation, Customer Satisfaction, Process Compliance, Integration Support, Regulatory Compliance, Safety Adherence, Deadline Management

• Digital and mixed signal board design - detailed schematic level.
• Take responsibility for the digital simulation
• Assist the PCB designer with board layout
• Component and vendor selection and evaluation
• Participate in prototype bring-up and validation
• Prepare design and engineering reports
• Develop and maintain design and troubleshooting documentation
• Component selection, supplier communication during development, creation, and maintenance of component libraries
• Design, execution, and analysis of engineering, validation, and production tests and test equipment in coordination with other departments 

Skills: Schematic Design, Digital Simulation, PCB Layout Support, Component Selection, Prototype Validation, Design Reporting, Documentation Management, Test Execution

• Consult with key stakeholders on system requirements
• Develop and design optimized Electronic Hardware
• Contribute to design reviews
• Participate in the transition from concept to procurement and manufacture
• Conduct system integration
• Perform test and analysis, with accompanying reports
• Collaborate on formal system qualification activities
• Design analysis and documentation according to requirements from the Customer and the ME internal

Skills: Stakeholder Consultation, Hardware Design, Design Reviews, Production Transition, System Integration, Test Analysis, Qualification Activities, Design Documentation

• Verify the design solution to ensure quality and performance
• Troubleshooting and solution proposal for problems found at customer sites
• New technology research and implementation in a pre-development project
• Work closely with other R&D departments in the country
• Technical vendor evaluation
• Support Customer units with roll-out and in-field operations
• Support strategic product management with market and customer needs
• Contribute to TIS standardization by reusing existing solutions or by implementing reusable solutions
• Apply processes and standard Alstom rules
• Contribute to continuous improvement (Return on Experience, process, etc.)

Skills: Design Verification, Troubleshooting Solutions, Technology Research, Cross-Department Collaboration, Vendor Evaluation, Customer Support, Product Management, Process Improvement

• Lead the product electronic design specifications in the cross-functional team, including Offer Management, Industrialization, Firmware, Software, Mechanical, and other R&D colleagues
• Take ownership of hardware development through specification and selection of electrical and electronic components, simulation /modeling, testing, and validation, both on bench and in systems
• Develop electrical schematics, layouts, and wiring diagrams
• Perform integration of subsystems and subassemblies in conjunction with new design, product improvement, field, and production problem/resolution
• Provide support to test engineers
• Communicate mechanical requirements
• Provide support for troubleshooting all system-related issues
• Ensure cross-functional collaboration (purchasing, manufacturing, quality assurance, etc.) and be involved with the new product development process
• Gain a detailed knowledge of HVAC systems and architecture
• Support the team in knowledge management and continuous improvement activities

Skills: Design Leadership, Hardware Development, Schematic Creation, Subsystem Integration, Test Support, Requirements Communication, System Troubleshooting, Cross-Functional Collaboration

• Design, simulation, test, and verification/validation of the hardware aspects of the terminal management subsystems
• Report on the daily activities of terminal management to deliver designs and products on time and budget
• Deliver technology and products that meet performance, cost, and quality metrics
• Drive continuous improvement initiatives in the areas of analysis, design, and performance of the terminal management subsystems within terminal products
• Support the certification of products under electrical and operational standards
• Deliver multiple programs/products simultaneously and manage through times of conflicting and dynamic priorities
• Provide effective and efficient design support during the conceptual design, detailed design, integration, and test phases of a product development program, to achieve on-time and budget completion of assigned tasks
• Prepare and present design and analysis summary material during internal and external design reviews

Skills: Hardware Validation, Activity Reporting, Performance Delivery, Continuous Improvement, Certification Support, Program Management, Design Support, Design Presentation

• Flows product requirements and architecture concept to the HW Engineering requirements and boards/components requirements.
• Reviews and cooperates on customer proposals, internal product requirement documents, engineering requirement documents, and works with cross-functional teams to achieve product goals.
• Makes sure the hardware and system architectures are in synchronization.
• Provides effort, time, and cost estimation on various levels of granularity and confidence.
• Drives best practices in estimation and status reporting activities.
• Drives efficient and effective design reviews and recommends improvements.
• Assists in risk and opportunities identification, assessment, and mitigation/enhancement activities associated with the software solutions.
• Provides support in all phases of Product Life Cycle (PLC) and ensures to delivery of high-quality products on time and schedule.
• Provides technical guidance in software design and development activities.
• Provides training and mentors other Engineers.
• Helps to define Intellectual Property (IP) strategy and build an IP portfolio.
• Supports Verification Engineers during test strategies and plan definitions.

Skills: Requirement Flowdown, Proposal Review, Architecture Alignment, Effort Estimation, Status Reporting, Design Review, Risk Management, Product Lifecycle Support

• Oversees EMC/EMI and Electrical safety testing.
• Designs and properly documents PCBs using schematic capture systems (Orcad, etc.).
• Provides Spice or other design simulation.
• Designs complex power supply systems.
• Selects and evaluates electronic parts, components, and integrated circuitry for high-performance medical devices and other related hardware items used in OR integration applications.
• Drives best practices in various areas of HW development.
• Analyzes equipment failures and conducts tests to identify the point of failure.
• Conducts root cause analysis.
• Reviews vendor capability in support of product development and improvement
• Oversees proper PCB layout.
• Investigates, debugs, and brings alive designed boards by using proper measurement equipment like oscilloscopes, analyzers, and meters. 

Skills: EMC Testing, PCB Design, Circuit Simulation, Power Supply Design, Component Selection, Failure Analysis, Vendor Review, Board Debugging

• Analyze the product requirements and create a detailed hardware schematic and a formal, structured design
• Perform circuit analysis and traceability from the requirements to validate the design
• Design electronic circuits and/or prototypes using suitable components, systems, and equipment, including prototypes and test interfaces/equipment
• Prepare material (Schematic, Design Description, Accuracy Analysis, etc.) for design reviews (DDR, PDR, CDR, etc.)
• Work with other team members to analyze and solve any other design issues.
• Develop diverse engineering solutions for integrated avionics, COTS equipment, and custom electrical power, simulation, and control systems
• Design the ICT system hardware infrastructure and associated connectivity.
• Develop engineering documentation and configuration management of the system hardware infrastructure.

Skills: Requirements Analysis, Hardware Schematic, Circuit Analysis, Prototype Design, Design Review, Team Collaboration, Engineering Solutions, Documentation Management

• Experience in an equivalent position in the aerospace industry
• Working experience in the design of hardware products, prototyping, and debugging.
• Experience in drafting technical documentation.
• Experience in validation and verification, and safety activities.
• Familiarity with SoC designs (Intel or Freescale processors, GPU), high-speed peripheral interfaces.
• Proven track record of industrial project management
• Experience in developing a hardware product for avionic equipment.
• Good interpersonal skills
• English or Spanish mother tongue, with good knowledge of the other (written and oral)
• High resilience and ability to work in a challenging and very dynamic environment

Qualifications: BS in Systems Engineering with 8 years of Experience

• Experience in hardware design
• Knowledge in RF, RF tuning, and RF design
• Proven experience in electronic systems, troubleshooting, testing design
• Experience in project management
• Experience with prototype development and testing
• Excellent time management and organizational skills
• Demonstrated capability for critical thinking
• Ability to collaborate with other departments to ensure understanding of project specifications and business needs
• Demonstrated successful implementation of low EMI board layout and component designs.
• Fluent verbal English communication and proper written technical English

Qualifications: BS in Electrical Engineering with 5 years of Experience

• Good understanding of protocol specifications for communication interfaces like PCIe, MIPI, I2C, SPI, UART, etc
• Experience with power supply/power management.
• Hands-on debug experience with the usage of modern lab equipment (DSOs, Logic Analyzers, Protocol Analyzers)
• Experience in writing basic software routines and test scripts
• Strong desire to investigate system-level issues and drive problems to closure in a team-based environment with a proactive demeanor
• Experience with mobile and/or embedded processors
• Experience working with memory systems
• Experience with schematic capture/layout
• Experience interacting with offshore manufacturing partners
• Energy and drive to thrive in a start-up environment
• Successful track record of delivering highly innovative communications products
• Experience with high volume, low power, mobile products.

Qualifications: BS in Mechatronics Engineering with 6 years of Experience

• Experience using electrical design tools and software packages such as Cadence, Mentor Graphics, Autodesk, Eagle, PCB Express, OrCAD, LT Spice, or Hyperlinx.
• Strong analytical and problem-solving skills.
• Experience designing electronic components, integrated circuitry, and algorithms.
• Experience using empirical analysis, modeling, and testing methodologies to validate component, circuit, and hardware designs and thermal/emissions management.
• Excellent written and verbal communication skills, mastery of English and local language.
• Ability to effectively communicate product architectures, design proposals, and negotiate options at management levels.
• Ability to work independently and a strong desire for success.
• Can take initiative and work independently with minimal supervision
• Must follow established methods and processes, including work safety and security procedures.

Qualifications: BS in Applied Physics with 4 years of Experience

• Experience in Digital and Analog design, including power and thermal analysis.
• Experience in schematic development, component selection, circuit simulation, and PCB layout
• Working knowledge of Microprocessor-based products and Single Board Form Factors, including Intel, AMD, ARM, VPX, VME, and COM Express.
• Embedded Microcontroller H/W and programming skills (C, C++, Visual Studio)
• Understanding of industry standard interfaces and products (PCIe, DDRxx, USB, SATA, RS422/485, MIL-1553, Ethernet, CAN, RS422/485, Solid State Drives)
• Experience with graphics/video interfaces (HDMI, DisplayPort, HD-SDI, RS-170, LVDS)
• Working knowledge of FPGA Design and Simulation (Xilinx Toolsets)
• Experience in EMI/EMC, High Speed Signal Integrity design practices
• Experience in military design and test requirements, including MIL-1275, MIL-461, MIL-464, MIL-810
• Working experience with Six Sigma design tools, including DFMEA and Reliability Analysis
• Ability to use engineering development and test tools.
• Strong interpersonal skills and ability to work with interdisciplinary teams.
• Strong multi-tasking skills

Qualifications: BS in Computer Engineering with 10 years of Experience

• Passion toward hardware design
• Hands-on experience in prototype design, bring-up, debugging, functional verification, and validations
• Experience with lab equipment, including oscilloscopes, DMMs, power supplies, e-loads, etc.
• Experience designing high-volume consumer products from beginning to end
• Experience in embedded systems from 8-bit and 16-bit micro-controllers to multi-core ARM-based SoCs
• Hands-on skills in circuit-level simulation analysis
• Skills to automate lab testing equipment
• Strong firmware and programming/scripting skills
• Experience in the following areas: DC-DC, analog design, audio system design, high speed design, Bluetooth & WiFi radio integration, video electronics design, camera integration, sensor integration, etc.
• Solid EE fundamentals
• Proactive learning mentality, with teamwork spirit and a sense of responsibility
• Clear English communication skills

Qualifications: BS in Electronics and Communication Engineering with 7 years of Experience

• A proven and relevant track record in the automotive industry.
• Software development experience.
• Zuken CR8000 experience.
• Excellent IATF 16949 knowledge and experience.
• Mechanical design experience.
• High and low volume manufacturing experience.
• Advanced key component selection and architectural design experience.
• Advanced MPSoC/FPGA/VHDL Development experience, ideally involving video processing.
• Advanced high-speed digital design knowledge and experience.
• Advanced low-voltage multi-rail power supply design knowledge and experience.
• Analogue design knowledge and experience.
• Excellent technical problem-solving skills with a great attention to detail.
• Advanced technical expertise in the areas of PCB design and manufacture, EMC and safety compliance, and designing for both high and low volume manufacture.
• Ability to strike an optimal balance between design innovation and part/full re-use of existing and established hardware designs.
• Ability to work well within a team with excellent presentation skills

Qualifications: BS in Microelectronics with 12 years of Experience

• Ability to tackle problems and reason using a first principles approach
• Experience with circuit board design (preferably Altium) involving specification, architecture, design, simulation, prototype, schematic, layout supervision, validation, and manufacturing
• Strong understanding of analog and digital circuits (MOSFETs, op-amps, linear and switching regulators, microcontrollers, digital protocols like SPI and I2C)
• Experience with PCB component selection
• Exceptional organization and communication skills (both written and verbal)
• Experience in MATLAB, Python, C/C++, or equivalent tools for modeling and analysis
• Proficient in data visualization and statistical analysis
• Understanding of the hardware development process
• Proficiency with lab equipment (including oscilloscopes, signal generators, power supplies)
• Experience with sensor design and characterization
• Experience with CAN tools such as Vector CANape
• Experience with version control tools such as Git, SVN, or equivalents
• Experience in failure analysis, HARAs, and fault trees
• Familiarity with JIRA or similar task/feature tracking systems
• Experience with high-volume manufacturing
• Experience with embedded systems

Qualifications: BS in Integrated Circuit Design with 8 years of Experience

• Experience in programming in VHDL and on Linux platforms
• Experience in Programming on Zilinix FPGAs (any combination of VIRTEX-II Pro, VIRTEX-4, VIRTEX-5, or VIRTEX-6
• Experience with Xilinx ISE, Synplify Pro, and Modeltech’s Modelism
• Experience in programming in one or more of the following scripting languages: PERL, SH, BASH, CSH, Python
• Experience using LINUX or UNIX for day-to-day activities
• Experience or understanding of electrical design tools and software packages.
• Good analytical and problem-solving skills.
• Understanding of design for electronic components, integrated circuitry, and algorithms.
• Understanding of thermal and electromagnetic properties of materials and managing emissions.
• Good written and verbal communication skills

Qualifications: BS in Embedded Systems Engineering with 4 years of Experience

• In-depth understanding of grounding/surge requirements that accompany an Outdoor Remote Radio Unit
• Working knowledge of Forward, Flyback, Buck, Boost, Buck/Boost, Half-Bridge, Full-Bridge DCDC converter design.
• Hands-on experience with LISN, Loop Analyzer, Electronic loads, DC source, Oscilloscope, etc.
• Diversified experience in wireless product development.
• Can use electrical design tools and software packages such as Cadence, Mentor Graphics, Autodesk Eagle, PCB Express, or OrCAD.
• Ability to apply analytical and problem-solving skills.
• Experience designing electronic components, integrated circuitry, and algorithms.
• Experience with circuit design simulator software packages such as Cadence, PSPICE, LTSpice, or equivalent simulation tools.
• Can use empirical analysis, modeling, and testing methodologies to validate component, circuit, and hardware designs and thermal/emissions management.
• Strong written and verbal communication skills, and the ability to effectively communicate design proposals and negotiate options.

Qualifications: BS in Materials Science and Engineering with 6 years of Experience