• Develop hardware and embedded software solutions for power systems with real-time applications, together with the responsibility of circuit design and component selection to meet design requirements
• Contribute as a member on a multi-disciplined design team and as an active solution seeker and problem solver
• Perform, document, and maintain competence in circuit design, analysis, simulation and assembling lab bench environment to support product development
• Estimate and control Hardware design costs and collaborate with external electronic system design projects
• Maintain accurate documentation of concepts, designs, drawings, processes and contribute to the intellectual property position of the company.
• Demonstrate self-initiative and implement work plans and schedules
• Perform, design and develop engineering assignments related to hardware products and systems, including the development of new products or updates to existing products
• Ensure applicability of component design and conformity of products and disciplines to established standards as well as specifications
• Understand and adhere to cost targets established during the program design phase
• Use tools appropriately with technical guidance and complete tasks as well as assignments under normal supervision
• Develop and maintain all associated documentation, drawings, & procedures. 
• Maintain and document the calibration of all measuring equipment. 
• Work within the production unit to produce specialized electro-acoustic products. 

Skills: Hardware Design, Embedded Software Development, Circuit Simulation, Team Collaboration, Cost Estimation, Documentation Management, Design Compliance, Production Support

• Work as part of the engineering team in the overall support/service of the manufacturing operation, through the introduction of new technology/techniques, skill development, training, process optimization and cost saving projects. 
• Provide specialist electronic and problem-solving support to the production unit’s technical team, areas to primarily include but not limited to, all in-house built hardware. 
• Represent SE-CEI on all Test Hardware issues which fall within domain. 
• Prepare and maintain various electronic/technical reports for both internal and external use. 
• Provide training when required on electronic test / acoustic equipment and processes. 
• Operate to and maintain high personal standards in the completion of work and lead by example. 
• Participate in the relevant training and personal development training as appropriate to the effective delivery of these responsibilities. 
• Participate in the validation of new test equipment / new processes. 
• Carry out scheduled PM’s. 
• Ensure that all equipment cycle times are maintained and meet OEE requirements. 
• Ensure that housekeeping standards are upheld and support the 6 S culture. 
• Develop new and refine existing test equipment and processes. 
• Define user requirements of electronic hardware and transfer requirements into technical specifications. 
• Design/develop hardware modules on various projects based on engineering specifications and visualise through CAD tools. 
• Source or manufacture test equipment and infrastructure
• Maintain spares for all equipment that fall under responsibility. 

Skills: Manufacturing Support, Technical Problem-Solving, Test Hardware Expertise, Technical Report Preparation, Training and Development, Leadership, Test Equipment Validation, Hardware Design and Development

• Design, manufacture, build, bring up, debug, and test next-generation 77-81Ghz radar sensors
• Schematic capture and PCB layout of embedded microcontroller and FPGA systems
• Propose & execute hardware test plans to verify sensor performance and reliability
• Close the loop with design to pass radar performance and reliability requirements
• Expand the capabilities of the test vehicle platform to scale up live demos and dataset collection activities
• Participate in establishing design, test and release processes used by the team
• Assist in radar assembly and calibration duties with the rest of the hardware team
• Drive the systems and hardware development for the next generation of renewable energy solutions in addition to supporting optimization of the existing products.
• Focusing on costs and environmental requirements, develop efficient hardware concepts on provided specifications.
• Through simulations, prototyping and testing, consistently verify hardware functionality.
• Analyse and address hardware problems where appropriate to then provide efficient solutions for new and existing products.
• Drive innovation in electrical engineering by mentoring junior team members and communicating effectively across the business.

Skills: Radar Sensor Design, Schematic Capture, PCB Layout, Hardware Test Planning, Performance Verification, Test Platform Development, Radar Assembly, Mentorship and Communication

• Writing specifications and test plans.
• Specification and test plan reviews.
• Implementing RTL designs.
• Building test cases, scripts, reference models and testbenches.
• Running and debugging regressions.
• Generating and analyzing code coverage.
• Triage, debug, and root cause simulation, software bring-up, and customer failures.
• Perform diagnostic and post-silicon validation tests in the lab.
• Perform specification reviews and development
• Standards application and improvements

Skills: Specification Writing, Test Plan Review, RTL Design Implementation, Test Case Development, Regression Debugging, Code Coverage Analysis, Failure Diagnosis, Post-Silicon Validation

• Design internal tools to be used in the manufacturing, testing, and operation of the drone system
• Design and test prototype modules on the product roadmap 
• Assist in the characterization of various electro-mechanical sub-systems to be used for model validation
• Collaborate with cross-functional teams to support engineering test projects
• Work independently on-site with minimal supervision
• Develop and improve work practices
• Review process and product quality
• Collaborate with engineering functional teams
• Lead customer discussions on critical product and/ or process design
• Mentor and coach junior-level engineers

Skills: Tool Design, Prototype Module Testing, Electro-Mechanical Characterization, Cross-Functional Collaboration, Independent Work, Process Improvement, Quality Review, Mentorship and Leadership

• Talk to customers to understand special requirements
• Troubleshoot Hardware / Firmware systems
• Work on the customization of standard products to meet specific customer needs
• Work with suppliers and internal manufacturing team to produce and test custom solutions
• Partner with the Performance Engineering team to improve product costs and solve obsolescence issues
• Design and build devices, from low-power IoT devices to high-power industrial systems
• Make use of analog and digital design techniques, utilizing professional lab equipment, signal generators, oscilloscopes, VNAs, spectrum analyzers etc.
• Run simulations of analog/digital circuits and entire systems using industry-standard software tools
• Schematic capture and PCB layout to IPC, IEEE norms, using professional EDA software tools
• Boards bring-up testing
• Design for manufacture, considering the production requirements and limitations, BOM costs at higher quantities, supplier and distributor liaisons, Certifications and manufacturing
• Mechanical 3D modeling to produce prototypes and functional models for MVPs, which can be taken directly to manufacture

Skills: Customer Analysis, Hardware Troubleshooting, Product Customization, Supplier Collaboration, Cost Optimization, Analog and Digital Design, Circuit Simulation, PCB Design

• Development of the microprocessor board platform for safety devises
• Requirement definition on hardware side
• Specification of hardware interfaces to other elevator components
• Qualification test for electrical components (Engineering Verification)
• Perform root-cause analysis in collaboration with field experts for continued improvements
• Documentation for the design and technical support
• Leading QuEra’s hardware, integration and operational engineering strategies
• Monitoring reliability and performance of existing quantum computing systems to improve performance
• Leading multi-functional efforts to expand rapid production capabilities
• Communicating strategy goals and progress to internal and external parties
• Establishing an environment of innovation, trust, and excellence within the organization.

Skills: Microprocessor Development, Hardware Requirement Definition, Hardware Interface Specification, Component Qualification Testing, Root-Cause Analysis, Documentation and Support, Engineering Leadership, Performance Monitoring

• Perform all of the background investigation of a problem
• Characterize the problem and provide clear Next Actions to help drive to a solution.
• Document all known problems and solutions for a non-engineer audience
• Work with other teams e.g. Customer Engineering, Managed Services, Hardware Engineering and Software Engineering in order to drive to a solution
• Development new product or derive some products
• Topology/components selection and design
• Quality issues analysis and solve
• Product requirement assessment
• Product design, test and validation
• Support product manufacture and maintenance
• User manual/service manual and other document preparation

Skills: Problem Investigation, Problem Characterization, Technical Documentation, Cross-Team Collaboration, Product Development, Component Design, Quality Analysis, Product Validation

• In-charge of assembly of IoT devices using microcomputers, sensors, cameras through outsourced companies.
• Lead the testing of IoT hardware, troubleshooting and maintenance of IoT devices
• Install and configure including IoT hardware and software, IoT sensors and devices.
• Monitor IoT hardware performance of installations around the world through cloud applications.
• Documentation and developing details with flowcharts, charts, code comments and clear codes.
• Develop, implement and maintain the existing and new systems and applications.
• Execute hardware test plans and ensure successful completion.
• Assist and investigate technical issues either through remote support or on-site support.
• Provide timely updates and report to Management on ongoing projects.
• Lead the development of hardware for projects related to fleet management solutions
• Manage external design and production partners for hardware development, testing and production
• Define the product specification and architecture
• Support products already deployed at the customer

Skills: IoT Assembly, IoT Testing and Troubleshooting, IoT Installation and Configuration, Performance Monitoring, Technical Documentation, System Development, Test Plan Execution, Technical Support

• Specifies and designs hardware, both for flight applications and associated test equipment at board and unit level
• Defines technical concepts, modularity, synergies across products and technology choices together with Technical Lead Engineering
• Supports sales activities in requirement analysis, proposal preparation and cost calculations
• Collaborates actively with other departments to ensure best possible trade-offs in terms of component selection, design-for-manufacturing, and design-for-test
• Performs detailed analysis (parts stress, worst case, failure modes and effects analyses) of the circuits/boards considering the applicable standards and environmental effects (radiation, thermal)
• Participates in systemization and specification work at the system level together with the team
• Describes the design in technical reports for internal and external use
• Provides inputs to higher-level documents/analyses, such as Electrical Interface Control Documents, thermal analyses, etc.
• Defines test procedures for design verification and qualification
• Supports design verification tests and proposes/implements design improvements
• Supports production during error investigations and test campaigns
• Participates in meetings with customers and subcontractors
• Actively contributes to improvements in the products, processes, methods and tools

Skills: Hardware Design, Technical Concept Development, Sales Support, Cross-Department Collaboration, Circuit Analysis, Systemization, Technical Reporting, Test Procedure Definition

• Experience with automation systems
• Knowledge of Mechanical Systems and AutoCAD Drafting
• Ability to collaborate with a global design team while working independently at a customer location
• Strong problem-solving skills
• Attention to detail and commitment to delivering high-quality solutions
• Excellent verbal and written communication skills
• Knowledge of the Data Center environment
• Experience with internship/co-op or project work in computer architecture, VLSI, design, logic design, or circuit design
• Strong teamwork skills with the ability to collaborate with multiple functional teams across a variety of fields
• Experience with C/C++, Verilog, VHDL, Python, Perl, and/or Spice is beneficial
• Currently enrolled in an undergraduate or graduate program in Computer Engineering, Electrical Engineering, Computer Science or related fields

Qualifications: BA in Electrical Engineering with 5 years of Experience

• Experience with system-level design including circuit design, system integration and debug
• Experience with multiple technologies such as cameras, RF, displays, sensors
• Experience leading and driving design development from schematic capture, PCB layout and assembly
• Experience with manufacturing processes including DFM and DFT for consumer products
• Track record of delivering high-volume consumer electronics products
• Strong interpersonal skills and capability to be a key member of various cross-functional teams
• Understanding of high-speed design
• Understanding of all components used in mobile devices such as SOCs, power ICs, memories and the various interfaces to other parts of the system
• Strong communication and documentation skills
• Knowledge of PCBA design in Altium.
• Experience in Interoperability testing of EVSEs and EVs.
• A good understanding of energy management protocols like OCPP, Open ADR, CTA-2045.
• Knowledge of HomePlug Green PHY protocol.
• Knowledge of Control pilot communication between EVSE and EV.
• Knowledge of real-time Embedded C applications on 8-bit, 16-bit and 32-bit processors and knowledge of UL and IEC standards for Electric Vehicle Supply equipment.

Qualifications: BS in Computer Engineering with 6 years of Experience

• Experience in NPI and/or sustaining engineering for electronic products
• Knowledge of component selection, PLM system use, and PRQ process best practices for electronic products
• Strong understanding of PCB and PCBA manufacturing and assembly processes used in consumer electronics
• Familiarity with schematic capture and PCB layout software tools
• Proficiency in the use of electronic test equipment such as oscilloscopes, logic analyzers and power supplies, as well as surface-mount soldering and rework equipment
• hardware development experience in system level design, board design, and component designs
• Understanding of the system integration challenges posed by wireless technologies such as Wifi, and Bluetooth.
• Familiarity with the design of experiments and design for manufacturability 
• Experience with high-volume consumer electronics products in a contract manufacturing environment
• Experience in bringing products to market
• Experience in low-power systems design
• Experience with digital embedded systems and analog design

Qualifications: BA in Electronics Engineering with 4 years of Experience

• Experience with debugging Android devices
• Advanced Cadence Design Tool experience
• Proficiency with Design for Cost and Design for Manufacture
• Strong analytical skills including basic statistical analysis
• Experience with audio, wireless, battery, and power management
• Experience in bring-up, debug, validation and optimization of systems DMM, DC analyzer, etc.
• Experienced in schematic capture and PCB layout
• Experience with MS office including excel
• Ability to root cause hardware issues.
• Strong written and verbal communication skills
• Experience with circuit design (e.g., digital, analog, RF).
• Experience utilizing schematic capture and circuit simulation software.
• Experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, RF tools, etc.

Qualifications: BS in Mechatronics Engineering with 5 years of Experience

• Familiarity with Facility design and/or modification of building infrastructure
• Experience with using hand tools, power tools, multi-meters, or network testers
• Ability to communicate effectively with technical and non-technical members of the engineering/management staff and personnel assigned to related work
• Aptitude for solving challenging problems in a team environment
• Ability to adapt and perform in a dynamic environment.
• Experience with Hardware or Maintenance engineering lifecycles
• Familiarity with Dynamic Object-Oriented Requirements System (DOORS) and Windchill (or Cameo)
• Experience with Waterfall and Agile methods
• Experience with Military Naval domain
• Experience with Sensors, Weapons or Ship integration.
• Familiarity with DOORS, Windchill, Windchill or Cameo
• Experience with Subcontract Management or Supply Chain Management
• Experience with Change Management, Requirements Management, Test and trials, Security, Safety, Electromagnetic Interference (EMI)/ Electromagnetic Compatibility (EMC) or Environmental Qualification.

Qualifications: BA in Computer Science with 6 years of Experience

• Experience of VHDL
• Excellent knowledge of analog and digital electronic circuit design
• Ability to write comprehensive technical design documentation
• Proven experience in handover and management of designs in production
• Excellent hardware troubleshooting skills
• Able to support/debug system integration
• Ability to use HW design and PCB layout tools (Mentor Graphics, Xilinx or similar)
• Experience in C, preferably in embedded applications
• Ability to support and perform software debugging
• Ability to design circuits containing embedded processors and FPGAs
• An appreciation of RF electronics
• Experience in interfacing with high-speed data converters
• Efficient DC power supply design
• Knowledge of Radar systems

Qualifications: BS in Software Engineering with 4 years of Experience

• Experience and familiarity with 3G/4G/5G cellular communications systems infrastructure (RAN and CORE) and user equipment (UE / CPE)
• Basic RF engineering skills including familiarity with 3G/4G/5G radios/antenna systems
• Design and deployment of LANs, WANs, and wireless networks, including servers, routers, hubs, switches, UPSs, power plants, HFCs, and other networking hardware
• Experience with basic electronic test tools such as DVM, fiber test sets, RF power meters
• Experience with basic laboratory test equipment like Ethernet test sets, base station analyzers, oscilloscopes, spectrum analyzers, signal generators
• Competence with diagnostic and standard hand tools
• Good working knowledge of AC and DC power design and testing including 3-Phase AC
• Experience and familiarity with configuration, design, and operation of 24VDC and 48VDC power supplies
• Familiarity with networking equipment, fiber optics, GPS systems
• Familiarity with electronic equipment installation best practices and regulations
• Basic familiarity with electronic equipment regulatory certifications
• Excellent hardware and troubleshooting experience
• Proven analytical and problem-solving abilities
• Excellent communication skills, both written and oral

Qualifications: BA in Robotics Engineering with 5 years of Experience

• Digital design experience in a fast-paced high volume environment
• Design experience with high-speed interfaces
• C/C++ experience in an embedded environment
• Practical knowledge of DDR, SATA, USB, ETHERNET, HDMI
• MPEG audio and video experience
• Knowledge of EMC and SI principles
• Strong problem-solving and communication skills
• Strong digital design skills
• Proficiency with lab test equipment
• Experience with lab bring-up and system design validation.
• Experience with high-speed design signal integrity issues, power distribution, and CPU subsystem design.
• Knowledge of Systems operation.
• Experience in Board Design tools Cadence Concept/Allegro
• Excellent communication skills.
• Ability to express complex technological concepts, influence others, and emphasize cooperation within a team environment.
• Ability to consistently meet or beat deadlines.

Qualifications: BS in Telecommunications Engineering with 2 years of Experience

• Experience with RTL development (Verilog / VHDL or equivalent) on FPGAs or ASICs
• Experience in SoC/embedded systems programming experience in C/C++
• Experience with Verilog or VHDL and design floor planning, timing closure and IP integration on FPGAs
• Experience in hardware design verification using SystemVerilog, OVM, UVM or similar infrastructure
• Familiarity with machine learning and deep learning
• Strong communication skills and the desire to collaborate in a team of engineers.
• Be fluent in English (IELTS/TOEFL certificate is a plus).
• Experience in Digital and Analog schematic design.
• Experience in hardware design (schematic and layout).
• Knowledge in working with multi-layer, high speed PCB design, PCB simulation.
• Experience in Generating BOM, gerber files, DFM files.
• Experience in firmware programming C/C++ (ARM microcontroller, driver, I2C, SPI, I2S, USB bus interface...).
• Strong understanding of communication protocols (I2C, SPI, UART...).
• Excellent analytical, debugging and problem-solving skills.

Qualifications: BA in Systems Engineering with 3 years of Experience

• Experience with Electronic circuit technology design and assembly processes
• Experience with PCB / PCA manufacturing processes
• Experience in Testing
• Capacity to analyze a problem from multiple perspectives and explore creative solutions
• Strong drive to achieve business objectives
• Fluent in written and spoken Spanish and English.
• Experience in Version Control Systems (Git, SVN)
• General Motion control or robotics knowledge (motors types, feedbacks, controls, etc.).
• Industrial communication protocols (EtherCAT, EtherNet/IP, Profinet, CANOpen)
• Experience in Functional Safety
• Experience in Certification Process (CE, UL, Safety, etc.)
• Previous experience in motion control, robotics, lab or medical automation markets will be highly appreciated.
• Excellent written, verbal, and interpersonal communication skills
• Ability to understand and communicate complex ideas in both technical and user-friendly language.
• Able to prioritize and execute tasks in a high-pressure environment.
• Ability to work in a team-oriented, collaborative environment.

Qualifications: BS in Applied Physics with 4 years of Experience