Job Summary: 

• Troubleshoot, repair, and maintain equipment for production and support.
• Perform predictive and preventative maintenance on production and support equipment.
• Identify and implement solutions to machine and component reliability issues.
• Assist with equipment installation, equipment start-up, and shutdown.
• Control documentation applicable to equipment, i.e. manuals, files, preventative maintenance (PM), and work instructions.
• Assist in the task of keeping critical spare lists accurate and updated.
• Maintain all necessary tools, parts, hardware, software, documentation, etc.
• Enter and retrieve data and reports via Computerized Maintenance Management Systems (CMMS).
• Interact with internal and external personnel to gain information required to complete assigned work.

Skills on Resume:

• Troubleshooting (Hard Skills)
• Preventative Maintenance (Hard Skills)
• Reliability Engineering (Hard Skills)
• Equipment Installation (Hard Skills)
• Documentation Management (Hard Skills)
• Spare Parts Management (Hard Skills)
• CMMS (Hard Skills)
• Communication (Soft Skills) 

Job Summary: 

• Execute specific projects and tasks as laid out by management in a timely and effective manner.
• Assemble mechanical equipment in sophisticated automation lines
• Build out infrastructure systems necessary for the operation of the automated lines such as electrical feeds, airlines, hydraulics, water cooling systems, and material conveyance
• Work with both custom and off-the-shelf equipment and be able to adapt both to the overall equipment line integration
• Take information from schematics, blueprints, and manufacturer instructions and translate it into successful build-outs
• Work with programmers and mechanical engineers to troubleshoot and debug complex automated mechanisms and machines
• Connect, commission, and program PLC controller units
• Assemble and wire full-scale control panels
• Install and troubleshoot various sensors and probes and their associated gauges and electronic interfaces
• Install and troubleshoot motors, pumps, and gearboxes
• Install and maintain plastic extrusion equipment
• Use various precision measuring, metering, and scanning equipment
• Use a large variety of hand and power tools

Skills on Resume:

• Project Execution (Soft Skills)
• Equipment Assembly (Hard Skills)
• Infrastructure System Build-out (Hard Skills)
• Equipment Integration (Hard Skills)
• Blueprint Interpretation (Hard Skills)
• Troubleshooting and Debugging (Hard Skills)
• PLC Programming (Hard Skills)
• Precision Measuring (Hard Skills) 

Job Summary: 

• Perform emergency repairs in breakdown situations.
• Perform preventative maintenance on all equipment as scheduled
• Ensure all programs are being upheld and documentation is current.
• Create, edit, and revise Mechanical Maintenance SOPs.
• Order, organize, document, and maintain parts inventory.  
• Write simple correspondence, and complete manufacturing documentation completely.
• Report food safety problems to the Supervisor or Department Head to initiate action.
• Maintain food safety and food quality by completing job tasks and maintaining the work area in a sanitary manner.
• Safely maintain and repair all plant equipment.
• Possess and maintain a valid forklift license issued by the company.

Skills on Resume:

• Emergency Repairs (Hard Skills)
• Preventative Maintenance (Hard Skills)
• Documentation Management (Hard Skills)
• SOP Creation and Revision (Hard Skills)
• Inventory Management (Hard Skills)
• Correspondence and Documentation (Soft Skills)
• Food Safety Compliance (Hard Skills)
• Forklift Operation (Hard Skills) 

Job Summary: 

• Provide uninterrupted operation of equipment and machinery
• Identify equipment and operational problems and fix faults on equipment and machines.
• Analyze faults and use knowledge for preventive maintenance decisions
• Complete installation and calibration of equipment, monitoring the work and time to complete
• Ensure continuous process control and adjustment or assembling of device parameters
• Monitor the availability of spare parts and materials in stock and if necessary, order new spare parts on time according to instructions
• Coordinate and conduct preventive maintenance, involving SMA operators for preventive actions
• Be responsible for the installation of new equipment and supply connections (air, electricity, water)

Skills on Resume:

• Equipment Operation (Hard Skills)
• Fault Diagnosis and Repair (Hard Skills)
• Preventive Maintenance (Hard Skills)
• Equipment Installation and Calibration (Hard Skills)
• Process Control (Hard Skills)
• Spare Parts Management (Hard Skills)
• Coordination and Supervision (Soft Skills)
• Equipment Installation and Supply Connections (Hard Skills) 

Job Summary: 

• Build cable assemblies, circuit boards, and wiring harnesses.
• Test and troubleshoot electronic components, sub-assemblies, and fixtures following approved process documents, test procedures, and specifications.
• Put together mechanical assemblies and sub-assemblies following mechanical documentation and direct communication with the engineering staff.
• Ensure adherence to drawing specifications, workmanship standards, and test procedures and consistently inspect and identify areas for quality improvements.
• Troubleshoot a wide variety of assemblies to the component level and interface with engineering in resolving the root cause of technical problems and defect analysis.
• Assist with parts selection and review of schematics and PCB layouts for new designs.
• Complete maintenance logs and reports.
• Provide feedback on quality issues to production/engineering teams, and provide training or assistance to other team members
• Take initiative and suggest ideas that assist with meeting daily/weekly schedule goals, enhance process flow, advance operator training, and/or improve product performance.
• Attend operation process improvement meetings which provide insight into data review.
• Provide assembly and technical assistance to the production line when required for line balancing or delays.

Skills on Resume:

• Cable and Circuit Assembly (Hard Skills)
• Testing and Troubleshooting (Hard Skills)
• Mechanical Assembly (Hard Skills)
• Quality Control (Hard Skills)
• Fault Diagnosis and Problem Resolution (Hard Skills)
• Parts Selection and Design Review (Hard Skills)
• Reporting and Documentation (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Setting up and operating test equipment to evaluate the performance of parts, assemblies, or systems under simulated operating conditions, and record results
• Applying knowledge of electronic theory and components, identify improperly functioning circuitry and components, and direct efforts to restore function
• Maintaining system logs and manuals to document testing and operation of equipment
• Conducting inspections for quality control and assurance programs, reporting findings and recommendations
• Maintaining a working knowledge of state-of-the-art tools or software by reading or attending conferences, workshops, or other training
• Providing technical assistance and resolution when electrical or engineering problems are encountered before, during, and after construction
• Collaborate with electrical engineers and other personnel
• Identify, define, and solve performance and/or design problems Writing reports and record data on testing techniques, laboratory equipment, and specifications to assist engineers
• Performing cross-functional tasks such as mechanical and electrical electronic assembly

Skills on Resume:

• Test Operation (Hard Skills)
• Circuit Repair (Hard Skills)
• Documentation (Hard Skills)
• Quality Inspection (Hard Skills)
• Continuous Learning (Soft Skills)
• Problem Resolution (Soft Skills)
• Engineering Collaboration (Soft Skills)
• Cross-Functional Execution (Hard Skills)

Job Summary: 

• Fabricate electrical systems including circuit boards, machine control panels, and simple mechanical components. 
• Assemble electrical and mechanical systems as directed by an engineer.
• Install electrical equipment following the NEC and local electrical codes. 
• Troubleshoot all electrical, electronic, and mechanical equipment problems. 
• Repair, rework and calibrate pneumatic, mechanical, and electrical assemblies and systems to meet operational specifications and tolerances with minimal supervision.
• Perform and document necessary inspections and maintenance. 
• Test performance of electromechanical assemblies.
• Verify dimensions and clearances of parts to ensure conformance to specifications.
• Maintain continuous improvement and preventative maintenance system
• Assist operators and maintenance personnel with repair procedures, adjustments, and projects.
• Assist in training operators/mechanics on repairs, adjustments, and SOPs.

Skills on Resume:

• Electrical Fabrication (Hard Skills)
• System Assembly (Hard Skills)
• Electrical Installation (Hard Skills)
• Troubleshooting (Hard Skills)
• Repair and Calibration (Hard Skills)
• Inspection and Maintenance (Hard Skills)
• Performance Testing (Hard Skills)
• Training and Support (Soft Skills) 

Job Summary: 

• Undertaking planned and responsive maintenance of plant and equipment.
• Installations, upgrades, and servicing, plus fault finding, diagnostics, and repair.
• Problem-solving and resolution, liaison with production leaders to ensure speedy resolution and minimal disruption to schedules.
• Work on technical drawings, maintain a log of maintenance activities.
• Adhere to health and safety, and conformance with regulatory and quality standards.
• Repair, maintain, and make changes to programmable logic controller systems.
• Identify and troubleshoot a large variety of mechanical and electrical malfunctions.
• Order necessary parts and materials to keep the systems running efficiently.
• Know the latest technologies and methodologies in automation and processing
• Help to support the research and development group in the conceptualization and application of new technologies
• Support the Machine Shop and Fabrication Department in providing direction concerning design questions, the construction and operation of new line equipment installations

Skills on Resume:

• Planned Maintenance (Hard Skills)
• Installation and Repair (Hard Skills)
• Problem-Solving and Troubleshooting (Soft Skills)
• Technical Documentation (Hard Skills)
• Health and Safety Compliance (Hard Skills)
• PLC System Maintenance (Hard Skills)
• Parts Ordering and Inventory (Hard Skills)
• Research and Development Support (Soft Skills) 

Job Summary: 

• Identifies and dispositions non-conforming parts in the mfg. and assembly process.
• Follows up to ensure corrective action is completed.
• Provides suggestions for preventative actions to eliminate future non-conforming parts, where possible.
• Provides drawing markups to engineering to capture ‘as built’ configuration of the product
• Follows standard Work Instructions to build equipment that meets requirements.
• Performs testing and documents results for review and approval of product release.
• Must have legible handwriting and be able to document completed work efforts.
• Be timely and accurate in clocking in and out of work and starting/stopping work efforts.
• Uses company time clock and shop labor system to track efforts.
• Provides support to customer service for troubleshooting, in-house, and field service

Skills on Resume:

• Non-Conformance Identification (Hard Skills)
• Corrective Action Follow-Up (Soft Skills)
• Preventative Actions (Soft Skills)
• Drawing Markups (Hard Skills)
• Work Adherence (Hard Skills)
• Testing and Documentation (Hard Skills)
• Legible Documentation (Hard Skills)
• Time Tracking (Soft Skills) 

Job Summary: 

• Assemble components on printed circuit boards.
• Performs assembly tasks such as soldering, electro-mechanical processes, and ultra-sonic or similar welding on simple to complex units using a variety of assembly instructions, oral and written, to produce a product to company and/or NASA or MIL standards.
• Uses assembly equipment to crimp, shape, insert components, wire wrap/twist/insert, weld, etc.
• Operates crimp tools, ovens, scales, cleaners, micro-welding machines, and other related equipment.
• Manually forms and inserts components into printed wiring boards and modules.
• Works with color-coded materials.
• Test and maintain automated, unmanned equipment including production machinery
• Read blueprints and other design documents to aid in mechanical assembly
• Test and maintain electronically controlled mechanical systems
• Follows up with customers on unauthorized repairs

Skills on Resume:

• PCB Assembly (Hard Skills)
• Soldering and Welding (Hard Skills)
• Assembly Equipment Operation (Hard Skills)
• Component Insertion (Hard Skills)
• Equipment Operation (Hard Skills)
• Blueprint Interpretation (Hard Skills)
• System Testing and Maintenance (Hard Skills)
• Customer Follow-Up (Soft Skills) 

Job Summary: 

• Assembles products and prototypes, performs and records testing on components, sub-assemblies, and prototypes, troubleshoots problems at all stages of product development, and maintains equipment and stock of parts.
• Supports procurement for prototype or production assemblies, tools, and shop supplies.
• Provides Customer service when required to support and maintain Intellitech product line.
• Understands and can read electrical schematics.
• Wire from an electrical schematic.
• Mechanically assemble from an engineering drawing.
• Performs machine and circuit wiring, electrical troubleshooting, mechanical building, and testing of prototype and production units.
• Assembles and tests products through the manufacturing process to ensure they meet requirements.
• Support customer acceptance and sell-off process.
• Responsible for completing tasks correctly and on or ahead of schedule leading directly to On-Time Delivery to Customer, No Part Defects, and Minimized Customer Returns.
• Participates in activities to review, analyze, and recommend actions to improve performance.

Skills on Resume:

• Product Assembly (Hard Skills)
• Testing and Troubleshooting (Hard Skills)
• Procurement Support (Soft Skills)
• Customer Service (Soft Skills)
• Electrical Schematic Reading (Hard Skills)
• Wiring from Schematics (Hard Skills)
• Mechanical Assembly (Hard Skills)
• Performance Improvement (Soft Skills)