• Hands-on assembly of mechanical and electrical subsystems
• Assemble cables, cable harnesses, and connectors
• Perform cable route within the equipment
• Assemble printed circuit boards in prototype quantities using a reflow process
• Testing, diagnosing, and modifying printed circuit boards
• Assembling and disassembling motors
• Electro-mechanical test standard assembly, setup, and troubleshooting
• Maintain a clean and safe working environment
• Operate in a fast-paced, ever-changing work environment with little supervision
• Comply with all safety requirements

Skills: Subsystem Assembly, Cable Assembly, Cable Routing, PCB Assembly, PCB Testing, Motor Assembly, Electro-Mechanical Testing, Safety Maintenance

• Identify and resolve equipment issues as they occur on time to keep production lines operating efficiently.
• Perform routine and non-routine preventive maintenance as identified through inspections and preventive maintenance programs.
• Conduct equipment and changeover to support production operations.
• Troubleshoot and correct equipment issues as they occur.
• Set up and change over equipment to achieve maximum efficiency during production.
• Perform routine and non-routine preventive maintenance
• Support production, quality, R&D, warehouse, and administrative staff with projects
• Maintain all maintenance documents following plant quality and safety requirements.
• Recommend and implement plant efficiency projects as identified.
• Adhere to all maintenance programs concerning safety.
• Follow all programs that require additional documentation or permits such as Confined Space, Hot work, and Lock out/tag out.
• Set-up and maintenance of the following high-speed production equipment

Skills: Equipment Troubleshooting, Preventive Maintenance, Equipment Changeover, Production Support, Maintenance Documentation, Efficiency Improvement, Safety Compliance, High-Speed Equipment Setup

• Works with customers to troubleshoot issues and resolve technical questions
• Determines if warranty work
• Identify, analyze, and repair product failures
• Build from blueprints and instructions, follow test procedures
• Create test reports and Failure analysis reports
• Determines parts required to bring returned customer-owned equipment to working/repaired condition or required to send to customer for self-repair
• Performing the confirmation that the equipment is functional before returning it to the customer
• Follow up with customers as to their satisfaction with the services provided
• Recommends improvements or new procedures to better respond to customer requests
• Initiates SRA or RMA (Service Repair Authorizations or Return Material Authorizations)
• Provides a written or verbal estimate of repair to the customer from the repair technicians' evaluation

Skills: Customer Troubleshooting, Warranty Evaluation, Product Failure Analysis, Blueprint Assembly, Test Procedure Execution, Parts Identification, Equipment Confirmation, Customer Follow-up

• Respond quickly to any equipment-related downtime in the manufacturing process.
• Demonstrate flexibility and mobility to support operational needs.
• In the event of unplanned maintenance, advise the Team Leader at the first available opportunity of the estimated duration and/or impact of the repair work.
• Ensure adequate communications are maintained such that key information is passed on to the other Technicians, Engineering, and Team Leaders as applicable.
• Ensure all preventative maintenance activities are done on time and recorded in full on the designated forms. Report any unusual observations where applicable.
• Use the correct procedure for booking out any spare parts from the store's area.
• Ensure that all process parameters are recorded accurately and on time.
• Support all CI projects to help improve equipment reliability.
• Work to the highest engineering standards while maintaining safety requirements at all times.
• Assist with the validation of new and existing equipment
• Comply fully with changes in Quality system procedures and finish the designated C2C training on time.

Skills: Equipment Downtime Response, Operational Flexibility, Maintenance Communication, Preventive Maintenance Recording, Spare Parts Management, Process Parameter Recording, Continuous Improvement Support, Engineering Standards Compliance

• Participate in activities associated with the assembly, calibration, repair, and preparation of the robot and the accessories
• Perform electrical and mechanical repairs to maintain processes in the office and the customer sites
• Perform and assist in troubleshooting hardware problems
• Produce clear bug reports and service documentation
• Provide technical and operational support to other team members
• Ensure that all production and service activities are performed and documented
• Fabricate metal housings, fittings, and various other metal machine parts
• Calibrate hydraulic systems and mounting electronic parts
• Monitor, maintain, troubleshoot, and repair manufacturing parts and systems
• Coordinate and optimize complex mechanical and/or electrical systems for performance, reliability, and cost

Skills: Robot Assembly and Calibration, Electrical and Mechanical Repairs, Hardware Troubleshooting, Bug Reporting, Technical Support, Service Documentation, Metal Fabrication, Hydraulic System Calibration

• Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
• Diagnose and troubleshoot electrical and wiring issues
• Program relay logic via Ladder Logic.
• Prepare written documentation of electromechanical test results.
• Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
• Disposition to learn, set, and work with Telematics.
• Works with Production Planners to ensure timely repair cycle maintained
• Book incoming repairs into the SRA database
• Support production with the build and test of dryers, pumps, and subassemblies
• Assembly and wiring of components into complete units using blueprints, work instructions, and on-the-job training

Skills: Blueprint Reading, Electrical Troubleshooting, Relay Logic Programming, Test Documentation, Electrical Assembly, Telematics Setup, Repair Cycle Management, Production Support

• Troubleshoot and repair complex manufacturing equipment within a clean room environment
• Respond to maintenance service calls, perform scheduled and unscheduled work, installations, and enhancements of machinery and equipment
• Ensure Quality System requirements are being met
• Work with multiple teams across the division including production, skilled trades, and technical associates with the dual purpose of maximizing schedule efficiency and minimizing impact on manufacturing
• Document work performed per procedures
• Follow, write, and revise Maintenance and Calibration standard operating procedures
• Support other facilities with electrical controls technician needs
• Maintain compliance with training expectations
• Use commercial programs for diagnostic or check-out purposes.
• Perform schematic capture, drafting, and printed circuit board layout using CAD systems.
• Work with vendors and contractors to perform installation and maintenance work.

Skills: Equipment Troubleshooting, Maintenance Service Response, Quality System Compliance, Cross-Team Collaboration, Work Documentation, SOP Development, Electrical Controls Support, CAD and PCB Design

• Assists in the integration of factory automation equipment and the construction of new specialized machines.
• Reads, interprets, and applies machine and automation engineering designs in the form of technical drawings, schematics, and written and verbal instructions.
• Interprets simple programs and logic diagrams facilitating the construction of new automation and specialized machinery.
• Applies basic knowledge in the application of machine safety devices, such as light curtains, safety floor mats, anti-tie down machine activation, and fixed machine guarding used in an interlocked non-defeatable manner according to engineering instructions.
• Performs basic machining using manual, CNC, and/or available machine tools to assist in the construction of new factory automation and specialized machines.
• Performs basic welding and fabrication tasks using standard tools in the fabrication of new factory automation and machine building.
• Prepares and maintains record-keeping processes
• Supports existing basic automation installations.
• Helps train and instruct production operators in the use of automation.
• Applies basic mechanical principles used in the production of factory automation.

Skills: Automation Integration, Drawing Interpretation, Program Understanding, Machine Safety, CNC Operation, Welding and Fabrication, Record Keeping, Automation Support

• Electrical Engineering or equivalent related work experience.
• Experience in electronic/electro-mechanical repair and troubleshooting.
• Experience with high-power circuits
• Ability to read and use schematics and wiring diagrams.
• The ability to speak, write, and read English.
• Experience with through-hole and surface mount soldering.
• Basic experience working with hand tools.
• Basic knowledge of Microsoft Office.
• Excellent time management skills and adept at coordinating and following multiple deadlines
• Good attention to detail and the ability to follow specific, technical specifications and instructions

Qualifications: BS in Manufacturing Engineering with 1 year of Experience

• Ability to read, write, communicate, and comprehend written and verbal instructions.
• Maintenance skills in electronics, mechanical, or electromechanical device repair.
• Ability to troubleshoot AC and DC drive systems, PLC, and electrical controls.
• Ability to follow specifications, blueprints, manuals, and schematic drawings.
• Working knowledge of motor controls, programmable control logic, and input and output.
• Understand loom control systems - HP200, BK600, BK800.
• Proficiency with Microsoft Excel, and ability to add, subtract, multiply, divide, and measure up to 1/16.
• Ability to calculate and understand fractions, percentages, ratios, and proportions to practical solutions.
• Welding/Brazing skillset - proper use of all weld shop equipment.
• Versed in TPM principles.

Qualifications: BS in Electrical Engineering with 3 years of Experience

• Proficient in Microsoft Office
• Knowledge of Windows Servers, Unix/Linux Systems, and VPN
• Ability to understand and maintain project schedules
• Good verbal communication skills
• Able to work well independently and in a team environment
• Ability to read and understand technical drawings, datasheets, and written work instructions
• Experience using electronic test equipment
• Willing to travel domestically and internationally when necessary
• Ability to satisfy all Nuclear Regulatory Commission (NRC) security requirements to obtain unescorted access to U.S. nuclear power plants
• Experience in repair and troubleshooting of electromechanical systems, including motion control systems
• Experience in the nuclear industry with an emphasis on non-destructive examination (NDE) of critical components and systems

Qualifications: BS in Industrial Engineering with 4 years of Experience

• Electro-mechanical assembly experience
• Strong electrical-mechanical troubleshooting/diagnostic capabilities, including electrical control devices (motors, solenoids, relays, power supplies…etc.)
• Significant experience working with motion control and power distribution systems
• Familiarity with hydraulic and pneumatic components and assemblies
• Extensive electrical assembly experience including basic wiring, wiring harnesses, connectors (crimping and soldering), and panel building
• Experience in electronic PCB assembly/repair using microscope-assisted soldering of both SMT and TH components (IPC-A-610 certification a plus)
• Strong understanding of schematic drawings and basic circuit principles
• Ability to use standard electronic measurement equipment, such as multi-meters, to troubleshoot and repair electronic assemblies
• Ability to use basic machine shop tools (drill press, milling machine, lathe, etc.) to perform light modification of parts to ensure proper assembly
• Knowledge of good (safe) machine shop practices
• Capable of handling a variable task load under minimal supervision

Qualifications: BS in Electromechanical Engineering with 6 years of Experience

• Knowledge of mechanical and electrical theory and mechanics of materials.
• Solid knowledge of equipment, systems, and techniques appropriate to debugging mechanical and electrical systems.
• Experience in the repair and maintenance of electrical, mechanical, and automated equipment.
• Ability to learn quickly and demonstrated attention to detail, problem-solving, and solution-oriented.
• Strong written and verbal communication skills, with proven ability to communicate correctly and communicate problems and issues clearly and concisely.
• Ability to organize, prioritize, and accomplish multiple projects, with experience managing mid-sized projects.
• Ability to work independently with moderate supervision and with other team members in a cooperative manner.
• Demonstrated skills in analyzing, troubleshooting, and repairing complex electronic, mechanical, robotic, and electro-mechanical systems.
• Knowledge, skill, and ability to use a computer to work with Windows-based operating systems, spreadsheets, word processing, and SAP.
• Experience with automated packaging and process systems and components, including PLC programming (Allen-Bradley).
• Experience in an ISO 9000, FDA GMP, or USDA-regulated environment where gowning
• AutoCAD and/or SolidWorks experience
• Must be flexible to changing production needs and must be willing to adjust work schedules to meet departmental and company production objectives.

Qualifications: BS in Automation Engineering with 7 years of Experience

• Good computer skills - Microsoft Windows, with basic math skills
• Hodl forklift certified
• Qualified to perform duties to troubleshoot and repair electrical, pneumatic, and mechanical equipment.
• Ability to understand and program PLCs, HMIs, and VFDs (A/B and Wonderware)
• Ability to read, understand, and modify ladder logic programming.
• Ability to understand single/three phase and control wiring.
• Ability to read schematic diagrams.
• Ability to safely use a band saw, drill press, pipe threader, and common tools.
• Ability to use a tape measure with decimal and fraction scales.
• Knowledge of all E-stop buttons/pull cord locations on the line and ability to utilize them when needed.
• Knowledge of closed loop or PID control and the instrumentation used for process feedback.
• Knowledge of lock-out tag-out requirements.

Qualifications: BS in Mechatronics Engineering with 2 years of Experience

• Electro-mechanical technician experience
• Diagnosis of electrical and mechanical problems on complex automation equipment
• Large-scale automation installation experience
• Some programming background to download updates, go online, and monitor I/O status
• Programming skill set to learn and assist with mobile robot setup.
• Management working experience
• Ability to pull up SW CAD models/mechanical and 2D electrical drawings/BOMs for equipment maintenance, spare parts identification/re-ordering purposes.
• Experience and knowledge of how to safely use all types of hand and power tools 
• Experience with assembly of complex mechanical assemblies and mechanisms
• Experience with the maintenance of complex mechanical assemblies and mechanisms
• The ability to read and understand electrical schematics
• Working knowledge of facility electrical systems with an electrician license
• Understanding of PLCs and controls (esp. Beckhoff) 

Qualifications: BS in Mechanical Engineering with 5 years of Experience

• Automated equipment troubleshooting and repair experience
• Solidworks design working experience
• A working knowledge of machine shop
• Strong fundamental engineering analysis skills and a hands-on understanding of manufacturing processes
• Assembly and testing of small electro-mechanical devices
• Timely and accurate record-keeping/documentation of work
• Motivated individual, fast learner, and good interpersonal skills
• Capable of working independently
• Proficiency in MS Office skills (Word, Excel, PowerPoint, and Outlook)
• Ability to analyze engineering drawings to determine the electronic fabrication requirements and layout of electronic assemblies

Qualifications: BS in Robotics Engineering with 2 years of Experience