• Work closely with the Senior Chemical Engineer, on the scale-up of the processes for manufacturing the company's biobased material and the application of that material in microcapsules, films and coatings
• Work with autonomy and freedom, to design experiments, develop formulations of materials, make batch samples, test properties of materials, and trial manufacture and scale-up
• Support regulatory, certification and Quality work
• Work with a small team of lab-based research scientists
• Liaise with external partners and customers in the scoping of equipment, development of samples and pilot trials
• Coordinate with Supply Chain and Purchasing to ensure raw materials, packages and bulk trucks are available 
• Working closely with the manufacturing department to develop, coordinate, and implement technical training for employees
• Maintain exemplary conduct at all times and enforce Coim USA Policies and Procedures
• Must be proficient in all aspects of the operator position and must perform these duties
• Uses and maintains systems associated with PSM, TCPA, QMS, GMP, etc

Skills: Process Scale-Up Expertise, Experimental Design and Formulation Development, Regulatory and Quality Compliance, Team Collaboration, External Stakeholder Engagement, Supply Chain Coordination, Technical Training Development, Compliance and Policy Adherence

• Respond to process problems that are not solved by production operators through standard troubleshooting procedures
• Investigate and solve process-related failures by driving to the root cause
• Drives yield improvements and defect reduction efforts
• Responsible for monitoring the chemical condition of plating baths and water treatment and supervising lab technicians
• Assures that process-related SOPs and work instructions received from other facilities are fully applicable to local situations, are translated to the local language, and are available and properly understood by production personnel
• Implement, maintain and comply with all Honeywell’s Health, Safety, Environmental and Security policies, procedures, work instructions, standards or best practices and applicable Law & regulations, related to their job/function.
• Overseeing and managing multiple concurrent projects
• Managing staff of engineers and construction managers, as well as internal and external staff and consultants
• Communicating project metrics to key stakeholders
• Conducting presentations to senior management
• Open conferences to direct processes and share technologies with individual divisions and manufacturing plants.

Skills: Advanced Troubleshooting Skills, Root Cause Analysis, Continuous Improvement, Chemical Management and Supervision, SOPs Implementation, Health, Safety, and Environmental Compliance, Project Management, Stakeholder Communication

• Lean manufacturing analysis
• Engineering design and implementation for high-purity semiconductor chemical processes.
• Find & implement ideas to improve the profitability of various processing units.
• Evaluate existing in-situ metrology for process control uptime, running costs, sensitivity, and throughput.
• Assist in documentation maintenance for production
• Assist in estimating materials, time & cost of projects.
• Assist in evaluation & selection of equipment & materials.
• Assist in producing and testing products.
• Assist in the supervision of technicians for production.
• Work to improve chemical reaction processes for existing and new products.
• Improve manufacturing performance like yield improvement, cycle-time reduction, capacity and throughput increment, etc.

Skills: Lean Manufacturing Analysis, Engineering Design for Semiconductor Chemical Processes, Process Improvement Initiatives, Metrology Evaluation and Optimization, Project Estimation and Documentation, Equipment and Material Selection, Product Development and Testing, Supervision

• Participate in developing and implementing manufacturing processes that involve glass or material substrate chemical reaction processes. i.e. etching, ion exchange, lamination, and substrate bonding/ stacking.
• Lead experimentation process development for new production line and drive fundamental understanding.
• Work to improve chemical reaction processes for existing and new products.
• Improve manufacturing performance like yield improvement, cycle-time reduction, capacity and throughput increment, etc.
• Assist in performing root cause analyses of product failures and implement corrective actions.
• Provide support for new business opportunities.
• Defining and analyzing equipment performance, capability and requirements, co-work on stage 2-3 development/testing and stage 4-5 technology migration.
• Work with research & development teams for new processes and product development and introductions.
• Transfer of technology to divisions and manufacturing plants with full implementation of training and documentation systems (Standard Operation Procedures, Process Set-points, FMEA, MSDS, Rosh and Training)
• Assess risks of chemical application in engineering, technologies and manufacturing.
• Process engineering study and implementation of final products final inspection, data collection, and quality controls to meet customer specifications.
• Be consulted for information on process control and lessons learned regarding project experiences and backgrounds.

Skills: Process Development and Optimization, Experimental Leadership, Continuous Improvement, Root Cause Analysis and Corrective Actions, Technology Transfer and Implementation, Collaboration with R&D Teams, Equipment Evaluation and Requirements Definition, Quality Control and Compliance

• Effective communication in interdisciplinary teams.
• Organize opinions from team members, customers, and vendors.
• Execute project plans, tasks and schedules effectively as a lead of a technical team.
• Gathers detailed information on a project, develops a clear and concise scope of work, and together with knowledge of applicable code requirements, develops plans and specifications to meet operating and environmental criteria
• Consult with the Director of Engineering and appropriate outside resources to provide an accurate cost estimate of the improvements necessary to meet requirements and estimated project duration.
• Provides the required technical support and appropriate resources to prepare, submit and obtain permit approvals for a project.
• Discusses the following with PM and Client (as directed by the PM) and assists in the preparation of proposal documents: Project scope, Budget, Design and construction schedule, Phasing, Construction cost, Level of design and detail 
• Ensure meeting budget and schedule, Client standards/expectations, including details and specifications, Understanding of existing conditions, Site location and field investigations, Project reviews, Type of specifications, Construction-phase services, and Record drawings
• Assists in training the project team and other less experienced discipline personnel.
• Directs the interaction with the project team to coordinate project specifics.
• Develops a project execution plan for the process discipline to achieve project scope, schedule and budget.
• Confirms project scope, schedule and budget for designs with the PM.

Skills: Effective Communication, Organizing Opinions and Feedback, Project Planning and Execution, Detailed Project Information Gathering, Cost Estimation and Project Duration, Regulatory Compliance, Proposal Preparation and Client Interaction, Project Coordination

• Interacting with clients and vendors to develop project details.
• Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, and yields, reducing costs and changeover losses
• Prepare training material for operations to communicate process settings and the impact on product quality.
• Develop, communicate and implement systems that optimize all phases of the production process.
• Perform root cause analysis on product non-conformances and quality deviations.
• Focus on existing products or processes, routinely coordinating work with other specialists and executive groups to facilitate engineering and manufacturing projects.
• Perform conventional, less sophisticated engineering assignments that may involve design, testing, and preparation of existing and new products.
• A review of new designs or applications is vital and includes applying standard techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Follows company standards for project and drawing coordination, documenting decisions made during the project.
• Establishes provisions for and prepares a design control sheet for the following information
• Operating and design capacities, including diversity
• Backup/redundancy and reliability equipment requirements

Skills: Client and Vendor Interaction, Manufacturing Systems Optimization, Training Material Development, Process Optimization, Root Cause Analysis, Project Coordination and Collaboration, Engineering Assignments, Design Control and Documentation

• Obtains owner's standard details and specifications and design standards from PM.
• Shared with the project team and incorporated into the final design.
• Manages requests for site utility information, design conditions, special needs data and other outside consultants and submits to PM.
• Develops construction cost comparison and complies with the level of estimate and items to be included per client, PM specifications, or contract specifications.
• Monitors process discipline project budget and progress.
• Notifies PM immediately if the design budget or schedule cannot be met, or additional scope items have been identified.
• Manages project documents per company and discipline standards.
• Coordinates or performs field investigations following company guidelines.
• Develops preliminary conceptual design consistent with project criteria as directed by the PM for discipline-specific items
• Take responsibility for process equipment and controls
• Take responsibility for process and piping systems
• Efficiently utilizes design software whenever possible, provides detailed design or supervises the design of the following items

Skills: Project Management, Technical Documentation, Budget Management, Communication Skills, Problem-Solving, Design Software Proficiency, Field Investigation and Coordination, Adaptability and Initiative

• Develop new materials and processes
• Act as liaison between case prep/treat group and customers
• Establish process flow and timetables for bringing the product to the manufacturing floor
• Support and monitor lean manufacturing program, GROWTTH
• Review current production for improvements in tooling and processes
• Reduce tooling damage and secondary operations
• Monitor and review non-conforming rate by part and process
• Reduce non-value-added operations
• Improve and support daily production requirements
• Work with customer engineers on sample production
• Work with customers and suppliers to analyze and troubleshoot rubber molding and metal stamping processes
• Assist Metal Stamping with the design of metal stamping tools and processes
• Utilize UV/VIZ and GC/MS spectroscopy, and FTIR testing equipment to analyze the elements, functional groups, and chemicals present in the material and fingerprinting to troubleshoot process-related problems
• Develop new adhesive formulations along with daily testing requirements.

Skills: Process Improvement, Customer Relationship Management, Process Optimization, Lean Manufacturing and Continuous Improvement, Tooling and Process Improvement, Quality Control and Non-Conformance Management, Troubleshooting and Technical Expertise, Chemical Analysis

• Develop overall scope of processes that may include CIP, sanitary piping, effective mixing, pump sizing, control valve and flowmeter sizing, heating and cooling exchanger and tank jacket calculations and chemical and raw material distribution and metering
• Develops or helps to develop sanitary piping layouts
• Sizes control valves, pumps, and flowmeters
• Provides support to recommend appropriate solutions for modifying existing processes implementing new processes or scaling up existing and new processes
• Specifies new process equipment and works with vendors to determine the appropriate equipment
• Provides process engineering support to contract manufacturers in support of Company products
• Helps to develop Capital Acquisition Requests by providing equipment requirements lists with cost estimates
• Develops P&IDs and Line Layouts in 2D Cad
• Work with equipment designers and plant personnel to develop cost-effective and working production processes & systems
• Develop fellow employees by coaching/mentoring in approach to problem diagnosis and resolution
• Effectively organize and communicate information and results to the Plant

Skills: Process Development and Optimization, Sanitary Piping Layout Design, Equipment Sizing and Specification, Process Improvement and Scaling, Vendor Management and Collaboration, Process Documentation, Capital Project Management, Communication

• Safely and efficiently manufacture a diverse range of products
• Execute work in a safe, lawful, and environmentally responsible way
• Ensure projects meet expectations for budget, time, & Effectiveness
• Improve manufacturing process capability and cost while maintaining or improving quality and safety standards
• Provide a leadership role for continuous improvement throughout the Plant by developing and implementing systems and solutions that optimize all phases of the production process
• Take the lead role and Strive to continually improve plant and processes in line with business goals.
• Utilizing performance data to identify areas for improvement and measure success.
• Make process changes via plating programs to optimize or set up new products
• Utilize root cause analysis tools and techniques to determine the root cause of significant failures and plan, implement and monitor control to resolve.
• Monitor and improve process plant maintenance schedules.
• Completion and maintenance of the plant pFMEA/Control plan and 11 color documents.
• Monitor and maintain the plating process fleet of jigs ensuring they are all up to standard and spares available.
• Complete Chemical analysis of all plating plants and issues in addition to production team ensuring plant quality is maintained.

Skills: Manufacturing Expertise, Compliance and Responsibility, Project Management, Process Improvement, Continuous Improvement Leadership, Performance Analysis, Root Cause Analysis, Maintenance and Quality Assurance

• Experience as a Process Engineer involving industrial chemical process control
• SME Experience in multiple process platforms (gasification, biodiesel, Hydrogen production via electrolysis and SMR, gas separations, distillation, RNG digester & processing & other specialty Chemicals)
• Be able to develop process engineering, installation, test and commissioning procedures.
• Ability to communicate in a second language – European or Asian languages
• Experience with industrial chemical operations, lab work, and/or fabrication
• Highly organized with sharp attention to numerical and scientific detail
• Excited to work on a small fast-paced startup team
• Driven to succeed and grow with the company
• Passion for industrial chemistry and sustainable mining
• Fluency in Spanish
• Ability to function on a product development team of multi-disciplinary engineers.

Qualifications: BS in Chemical Engineering with 6 years of Experience

• Self-starter with a passion for learning and willing to work in a plant environment.
• Completed basic Thermo Dynamics course or equivalent.
• Capable of responding appropriately during site emergencies as directed by the site emergency manager.
• Able to evacuate manufacturing process areas promptly should an emergency arise.
• Able to wear and properly utilize appropriate personal protective equipment to work or visit within the manufacturing process area.
• Possess the ability to identify critical issues and then formulate action plans with all levels of management, including corporate, 
• Ability to develop and foster a positive work environment at all levels, and 3) resolve conflicts through problem-resolution skills.
• Capable of identifying quality improvement opportunities and then formulating action plans for implementation, requiring exceptional work planning and problem-solving skills.
• Able to interface well with all levels of employees involved in process engineering work, including process operators, contractors, maintenance technicians, laboratory technicians, process/manufacturing engineers, operations managers, maintenance managers, and members of the plant leadership team.
• Ability to work with minimum direction to solve challenging problems

Qualifications: BS in Process Engineering with 8 years of Experience

• Experience with solids handling experience in the Oilseeds complex, preferably in an Oilseeds Crushing, Protein concentrate, and/or Vegetable Oil Refining, Palm Processing, Biodiesel, and/or Oleo-chemical business.
• Demonstrated sales support experience and have a strong competitive desire to succeed & win.
• High integrity and ethics and an entrepreneurial spirit.
• Excellent communication skills, both written and verbal.
• Effective at problem-solving and conflict resolution.
• Outcome-focused with the ability to manage competing priorities and work well under pressure.
• Strong attention to detail. and technology advocate into customer focus.
• Establish and maintain effective working relationships with co-workers, customers, and vendors.
• Responsive to requests and inquiries from internal and external customers.
• Well-developed presentation skills.
• Customer relationship management (CRM) experience
• Process Modeling experience – ChemCad, Aspen modeling

Qualifications: BS in Biochemical Engineering with 10 years of Experience

• Experience in metallurgical testing and chemical analysis.
• Knowledge and experience in chemical engineering in an industrial environment
• Practical experience in Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), Measurement Systems Analysis (MSA), and Process Failure Mode Effects Analysis (PFMEA) concepts.
• Experience with advanced automated manufacturing processes and flexibility to assist other manufacturing areas
• Able to drive change in a demanding atmosphere.
• Familiar with DFMEA and QA troubleshooting tools
• Successful track record of leading process improvement projects in a production factory
• Experience in scaling production in a fast-growing environment ideally in the Food, Pharma, Paper & Pulp, Semiconductor, Electrochemical, or similar industry
• Curious, technically educated and preferably with a strong business background
• Experience and interest in the manufacturing industry
• Experience in Catalysts, hydrometallurgy, calcination, battery Cathode material, NMC (Nickel Manganese Cobalt), NCA (Nickel Cobalt Aluminum)
• Six Sigma training with Green Belt certificate

Qualifications: BS in Environmental Engineering with 9 years of Experience

• Strong initiative and problem-solving that can adapt to a fast-paced environment
• Experience in process design, including fluid flow, heat transfer and plant operations
• Strong knowledge of safety and general industry standards
• Strong written and oral communication skills
• Excellent problem-solving skills and a high degree of personal initiative
• Ability to work well in a team environment and a diverse culture.
• Experience as a process engineer in a manufacturing environment
• Efficient in MS Office and CAD
• Hands-on experience in the electronic part manufacturing industry. Interested area Final inspection process, packaging design
• Good analytical skills (Data analysis)
• Experience in leading new/improvement projects
• Extrovert (Good interpersonal skills)

Qualifications: BS in Materials Science and Engineering with 6 years of Experience

• Experience with chemical engineering design and analysis software tools such as ASPEN+ or equivalent
• Demonstrated experience with process design including PFDs, P&IDs, and ability to specify components and systems
• Experience with engineering tools such as AutoCAD and Mathcad
• Demonstrated ability to work on a multidisciplinary team of engineers and scientists
• Experience with molten salt or other high temperatures fluid systems
• Experience with corrosive fluid/metal interaction, corrosion of steels, nickel alloys and/or refractory metals
• Demonstrated strong analytical/problem-solving skills, and creative thinking
• Ability to work on multiple tasks concurrently during a given workweek
• Nuclear design experience,
• Experience writing specifications for the procurement, fabrication, or testing of components
• Perform scientific analysis on test data and literature data to generate models and correlations to support design
• Experience with Python and data science and have working knowledge of ASME Section III, Div. 5

Qualifications: BS in Petroleum Engineering with 7 years of Experience

• Experience in glass and substrate chemical reactions especially etching, ion exchange, and lamination experience in a manufacturing environment.
• Experience in leadership, leading projects, coaching junior engineers, etc.
• Engineering base to drive technology from development to scale-up to mass production.
• Ability to directly analyze the fundamental root cause of process problems and implement optimal solutions. Knowledge of organic analytical techniques, e.g. 
• Optical microscopy, and AFM. Ability to work with inorganic analytical techniques, e.g. SEM-EDX
• Ability to qualitative and quantitative chemicals and materials and analytical profile explanation.
• Solid knowledge of glass and substrate chemical reactions especially etching, ion exchange, lamination, and substrate bonding/ stacking.
• Chemistry recipe and process design experience, and the ability to run engineering tests with simulation capability
• Etching or IOX engineering experience
• Strong problem-solving/analysis skills
• Proficient in English and Mandarin, good written and oral skills
• Ability to apply standard evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria.

Qualifications: BS in Mechanical Engineering with 8 years of Experience

• Have process development or operational experience in organic or sulfur chemical processes. 
• Professional working experience, preferably as a process engineer within the chemical manufacturing industry
• Chemical Process scale-up experience
• Experience in an operating environment or pilot plant facilities. 
• Experience in the commissioning of chemical manufacturing plants
• Demonstrated ability to work effectively in a complex, multicultural environment
• Fluent in English with a working knowledge of Spanish
• Presentation and technical writing skills to enable communication within the program team, internal, and external customers
• Self-starter, passionate about engineering and have a high level of technical curiosity.
• Dedicated, open to new ideas, and recognized for the flexibility to change
• Ability to input, retrieve, and organize information via computers and software programs.

Qualifications: BS in Industrial Engineering with 10 years of Experience

• Experience in hazardous chemistry handling
• Requires working with dangerous and/or toxic gases and the ability to physically control RASIRC-designed hazardous equipment.
• Experience with liquid and gas metrology for high-purity applications
• Experience in chemical fingerprinting
• Experience transitioning laboratory-scale processes and in-glove box work
• Solid working knowledge of applicable laboratory and hazardous materials procedures
• Ability to communicate at a high level (spoken and written) in English.
• Computer literate (Microsoft Office and Visio, Solidworks)
• Ability to function effectively in a dynamic environment with changing priorities.
• Self-motivated and focused.
• Understand heat transfer, mass transfer, and process piping ability to work hands-on with gases, liquids, and heaters.
• Ability to work in controlled environments following all applicable safety and cleanliness protocols.

Qualifications: BS in Chemistry with 6 years of Experience

• Demonstrated manufacturing process development ability on different types of materials and processes
• Desire and ability to work in both an office and workshop environment by combining formal education with hands-on work in the shop
• Strong knowledge and background in nondestructive testing and American Society of Mechanical Engineers (ASME) code requirements
• Proficiency in the use of personal computers, Microsoft Office products (Excel, Word, and PowerPoint) or equivalent, and email skills
• Recognized as a professional in the trade for the area of expertise
• Flexible work schedules to accommodate work performed in different geographies
• Process Engineering experience in a manufacturing environment
• Treating, coating, and/or adhesive process experience.
• Requires problem-solving and decision-making ability.
• Positive human relation skills and ability to work on teams or independently
• Good math skills, ability to read blueprints, and ability to use measuring equipment 

Qualifications: BS in Polymer Science and Engineering with 10 years of Experience