• Identify process problems and non-conformance in manufacturing processes and develop corrective actions.
• Define and perform maintenance and calibration procedures.
• Drive continuous and process improvements.
• Design of jigs and fixtures using SolidWorks.
• Manufacturing of devices containing small parts and low-volume manufacturing.
• Support internal audits and work under ISO13485.
• Documentation preparation and control.
• Review procedures for accuracy and make updates using a Document Change Order to reflect process changes, and develop production procedures, standard operating procedures testing and inspection and drawings.
• Participate in New Product Development teams to establish quality standards for new products and create process procedures, specifications and work instructions and support new product launches.
• Implement GMP (Good Manufacturing Practices) throughout manufacturing.
• Coordinate the training of Manufacturing Operators, acting as a mentor and technical resource.

Skills: Process Improvement, Calibration, Continuous Improvement, Fixture Design, Low-Volume Production, ISO13485, Documentation, Training

• Wastewater treatment plant design 
• Process simulation modeling and Site health checks
• Treatment plant costing evaluation 
• Analysis of data to assess performance
• Production of the basis of design, process options, calculations and reports
• Creation of process flow diagrams and piping and instrumentation diagrams
• Development of supplier performance specifications
• Creation of process control philosophy and commissioning plans.
• Improvements in bulk reliability through an annual reduction of rework and destruction costs.
• Improvement in First Time Right metrics related to yield non-conformance reduction and change control elimination.
• Adherence to qualified standards established for yields and machine rates.
• Enhancing consumers' value through improvements to quality and cost.

Skills: Wastewater Design, Process Simulation, Cost Evaluation, Data Analysis, Basis of Design, Flow Diagrams, Supplier Specifications, Process Control

• Leading, coordinating and executing the recurring validation activities according to the validation master plan
• Leading process characterization and development activities in projects and initiatives 
• Creating validation strategies, test plans, validation specifications, protocols and reports
• Documenting changes in methods, processes and material in ADAPTIV (MVI)
• Leading the equipment qualification
• Planning, coordination, monitoring and evaluation of manufacturing equipment and process validation activities 
• Training of employees in validation specifications, test plans, test methods, etc.
• Supporting the selection of processes/machines, taking into account the requirements of project and production as well as investment and cost aspects
• Ensuring an effective process risk management (FMEA), carrying out the process risk analysis, and process participation in product risk analysis 
• Developing manufacturing processes under application / taking into account methodological concepts (Six Sigma, Lean).

Skills: Validation Planning, Process Development, Test Documentation, Equipment Qualification, Process Validation, Employee Training, Risk Management, Process Improvement

• Supporting the root cause identification and implementation/documentation of corrective measures during the stabilization phase of a product/process development project
• Taking over coordination and project management tasks for the Aurangabad site if no project manager is associated with the project
• Ensuring process optimization within the stabilization phase of the assigned project 
• Engages in complying with ISO and FDA requirements
• Ensuring compliance with the Quality system requirements.
• Utilizing problem-solving skills and statistical techniques to support product/process controls that are aligned with the overall quality and business vision.
• Assuring that the engineering department runs in a safe, clean and environmentally sound manner.
• Developing and analyzing statistical data and machine specifications so as to determine present standards and establish proposed quality and reliability expectancy of the finished product 
• Assisting in engineering budget preparation, goal tracking and in the business planning process. 
• Supporting NCR’s investigation and performing trend analysis and reporting to Management

Skills: Root Cause Analysis, Project Coordination, Process Optimization, ISO/FDA Compliance, Quality Control, Safety Management, Data Analysis, Budgeting and Planning

• Participating in audits and gap assessments in support of the internal audit program and FDA readiness.
• Partnering with operations in the investigation/correction of process failure
• Developing a safety culture in the engineering function
• Responsible for updating the Record retention schedule for the Engineering department every year
• Observe and promote all regulatory requirements as defined per applicable regulations, rules and procedures established by the Company, and notify any violation or deviation to the immediate supervisor or appropriate authority.
• Complies with all training requirements to perform duties of the job. 
• Ensure adherence/compliance to Records Management policies and procedures,
• Responsible for communicating business-related issues or opportunities to the next management level.
• Responsible for ensuring that subordinates follow all Company guidelines related to Health, Safety and Environmental practices and that all resources needed to do so are available and in good condition
• Responsible for ensuring personal and Company compliance with all Federal, State, local and Company regulations, policies, and procedures 

Skills: Audit Participation, Process Investigation, Safety Culture, Record Retention, Regulatory Compliance, Training Compliance, Records Management, Health and Safety Management

• Own performance of manufacturing processes in areas/lines of responsibility
• Develop, oversee and implement capital project improvements for packaging and processing lines
• Ensure that the equipment in the plant is capable of making the product to specification at the rate to meet the production schedule
• Understand Environmental policy and regulatory compliance for wastewater, stormwater, HVAC and Hazardous waste
• Develop and maintain standard work, standard operating procedures and programs for the area of responsibility
• Lead the definition of proactive maintenance requirements
• Support daily operational troubleshooting and problem-solving
• Drive continuous improvement in area of responsibility, leading front-line data collection and analysis activities and designing new production processes
• Manage cross-functional teams of resources in Engineering/Maintenance, Production Management, Production Supervision, Procurement, and Marketing to identify and implement improvement opportunities
• Support marketing and new product development in feasibility, costing, developing, and rolling out of new products to manufacturing in the area of responsibility
• Act as a representative and supporter of the company to those under supervision
• Provide feedback/coaching to associates on how to improve performance and increase skills/responsibility
• Provide/oversee training to associates
• Ensure a safe working environment for associates

Skills: Process Optimization, Capital Projects, Equipment Capability, Environmental Compliance, SOP Writing, Preventive Maintenance, Troubleshooting, Continuous Improvement

• Using data analytics and economic thinking to identify and develop value propositions for new ideas that improve safety, reliability, quality, and yield
• Leading and delivering innovative experiments, process optimizations, and capital projects to improve site competitiveness
• Troubleshooting manufacturing processes and applying Root Cause Analysis methodologies
• Building strong collaborative relationships with other teams and leaders across the site and the business
• Analyzing process data to convert data into knowledge and actions, therefore enabling process optimization 
• Contribute positively to a team-oriented environment using strong interpersonal skills
• Show a commitment to ongoing learning and developing new skills while demonstrating strong analytical and problem-solving skills
• Show a willingness to embrace and live the core values of Market-Based Management

Skills: Data Analytics, Economic Thinking, Value Proposition, Experiment Design, Process Optimization, Root Cause Analysis, Cross-Functional Collaboration, Continuous Learning

• Optimize DC operations through analysis and improvement of key work processes, delivering breakthrough productivity improvement as well as cost and service improvements
• Analyze data to identify opportunities for cost savings
• Implement best practices within the operation
• Change management by influencing team members to embrace new processes
• Review and recommend manufacturing equipment and processes designed to be efficient, cost-effective, and to promote quality and reliability
• Assesses current manufacturing equipment and processes and makes recommendations for changes
• Helps to fix and repair equipment
• Shows results in reports

Skills: Process Optimization, Productivity Gains, Cost Savings, Best Practices, Change Management, Equipment Review, Equipment Repair, Reporting

• Build a foundational understanding of the coater and fabrication operations and processes
• Develop safe, compliant, and reliable operations through standard work procedures and statistical process control
• Identify opportunities for improvement and optimization
• Ownership of output quality, production results, and process waste
• Guide troubleshooting and problem-solving events
• Support the Operations team in a 24/7/365 environment

Skills: Process Understanding, Standard Work, Statistical Process Control, Process Optimization, Quality Ownership, Troubleshooting Support, Waste Reduction, 24/7 Operations Support

• Lead process development and documentation, including prototypes and development sampling
• Provide support to run trials 
• Develop timelines to meet Customer Deliverables and new product launches
• Plan, manage, and execute capital asset programs
• Effectively use tools such as Lean, Six Sigma, Kaizen, Root Cause Analysis, 5s, and Total Quality Management
• Review processing methods and provide continuous development of manufacturing techniques that will improve in-house capabilities
• Contribute to the continuous improvement initiatives on all aspects of the job
• Develop and guide to reduce the variation of the operational process
• Maintain a current knowledge of the operations process, new technology and processes, attend training courses, trade shows, and industry conferences 
• Work proactively with quality to address quality-critical manufacturing issues
• Conduct detailed studies providing an action and execution plan for cost reductions, quality improvements, and optimization of the manufacturing process to increase profitability
• Oversee efficient layout of the manufacturing process and workflow in accordance with lean methodology to eliminate waste

Skills: Process Development, Technical Documentation, Trial Support, Launch Planning, Capital Programs, Lean Six Sigma, Variation Reduction, Cost Improvement

• Planning of mold setup for machines and responsible for mold repair and maintenance in Woodlands Plant
• Overseeing tool room maintenance and resolving day-to-day issues in operations
• Implement process improvements and automation projects to enhance operations efficiency, product quality and reduce standard cost
• Liaise with manufacturing personnel for continuous improvement opportunities 
• Generate VIP ideas to minimize waste or implement cost-saving projects
• Support manufacturing and maintenance engineering
• Perform a thorough investigation related to product feedback/ complaint from customers and implement effective Corrective Action and Preventive Action (CAPA)
• Develop technical bench strength for the technicians and provide coaching and guidance 
• Responsible for compliance with EHS procedures and requirements

Skills: Mold Setup Planning, Mold Maintenance, Automation Projects, Process Improvement, Waste Reduction, CAPA Management, Technician Coaching, EHS Compliance

• Design and management of key Operational Excellence projects to increase the capacity of the site
• Manage capital projects from the generation of scope through to performance qualification and close-out
• Provide specialist technical knowledge/advice to all site operating personnel on process-related problems, including cost, quality, productivity and safety-related issues
• Provide day-to-day troubleshooting for plant process problems
• Monitor plant efficiency and capacity
• Identify and drive continuous improvement activities
• Lead and participate in HazID's, SIL assessments, LOPA's, etc 
• Manage safety action closure, method statements, validation activities, risk assessments, etc, on assigned projects
• Lead investigations and corrective/preventative action tracking where significant process safety incidents/events occur
• Undertake other special assignments of a technical or engineering nature as directed

Skills: Operational Excellence, Capital Projects, Process Troubleshooting, Technical Consulting, Efficiency Monitoring, Continuous Improvement, Process Safety Reviews, Risk Action Tracking

• Process engineering, process optimization, process description
• Performs hands-on testing of existing and newly implemented materials to evaluate/analyze system performance under actual operating conditions
• Performs hands-on testing of existing and newly installed molds or molding equipment to evaluate/analyze system performance under actual operating conditions
• Support mold design engineering of tooling and fixtures capable of increasing accuracy and/or decreasing cycle times
• Records test procedures and results, numerical and graphical data, and recommendations for changes in product or test method
• Utilizes statistical analysis and engineering tools to define and optimize production processes
• Writes technical reports and develops charts, graphs, and schematics to describe and illustrate process changes
• Makes observations and takes measurements directly, as well as collecting and interpreting data from the other technical and operating staff involved
• Programs machines with new or improved process steps
• Trains equipment operators when new or upgraded equipment is placed in service
• Develop work instructions and process steps to standardize production molding processes
• Routinely perform computer tasks using Excel, Word, JMP, or other applicable job-related software

Skills: Process Optimization, Hands-On Testing, Mold Equipment Validation, Tooling Support, Statistical Analysis, Technical Reporting, Machine Programming, Operator Training

• Works with manufacturing and quality colleagues as part of an Operations team whose shared goal is to realise the safety, quality, delivery and cost objectives of the site
• Supports manufacturing by leading/supporting deviation investigations, and is familiar with structured problem solving and root cause analysis
• Supports validation activity in process manufacturing areas
• Leads continuous improvement projects and initiatives and is the owner of yield performance and cycle time improvement
• Provide technical support for the receiving site activities necessary for the successful transfer of new products onto the Athlone site via a structured and compliant NPI (new product introduction) process
• Provides technical support for product APRs (Annual Product Review)
• Provides training and mentoring to build technical capabilities among teams
• Supports capital projects throughout the equipment lifecycle

Skills: Cross-Functional Support, Deviation Investigation, Root Cause Analysis, Process Validation, Yield Improvement, NPI Transfer, Annual Product Review, Technical Mentoring

• Help to identify variables that may impact process efficiencies and capacities and use this knowledge to support experimental design
• Contribute to the analysis of data and interpretation of results to determine necessary trials to help drive projects and investigations
• Responsible for supporting the development and execution of trials in response to experimental design to achieve a greater understanding of processes
• Execute assigned tasks to allow the overall objective of projects, material introductions or investigations to be met promptly
• Liaise with appropriate resources to enable the completion of tasks
• Participate in appropriate cross-functional teams to help achieve the team objectives promptly
• Communicate results of tasks either verbally, in writing, or through visual methods
• Attain the highest level of technical reporting, ensuring that the objectives, methods used, and outcomes are clearly presented
• Support the development and enhancement of protocols and techniques to achieve the objectives of set tasks
• Support technical investigations including Product Test Failures, Out of Specification (OOS) materials and Complaints

Skills: Experimental Design, Data Interpretation, Trial Execution, Project Support, Cross-Functional Liaison, Results Communication, Technical Reporting, OOS Investigation

• Support Design control projects for on-market changes
• Maintain appropriate records of activities and tasks carried out, in compliance with the appropriate Quality System requirements of the company
• Responsible for maintaining the effectiveness of the Quality System at the site in accordance with divisional and corporate requirements and applicable regulations
• Perform all activities assigned according to approved operating procedures or preapproved protocols
• Complies with EHS regulations and business standards by adhering to EHS systems, programs and procedures, being accountable for the Health and Safety of themselves and others and by highlighting where improvements to EHS performance can be made
• Responsible for supporting the execution of trials for characterization (of product, material and process), verification and validation for new products
• Ensure manufacturing is supported and represented when new products are introduced
• Through the collection and the analysis of appropriate data, e.g., process and Product Test, helps to identify potential issues and areas for improvement with MU
• Recommend possible benefits of potential areas for improvement and support cost improvement projects

Skills: Design Control Support, Quality System Compliance, Record Maintenance, SOP Adherence, EHS Compliance, Trial Execution, Process Data Analysis, Cost Improvement

• Support the product development, R&D and Advanced Manufacturing teams with process development and DOE (design of experiments)
• Design, document and improve manufacturing processes and procedures
• Develop and automate production assembly and test stations
• Perform new equipment, processes, and testing validation
• Validate processes to meet automotive manufacturing requirements
• Develop and analyze KPIs, CPS, DOE and GR&R
• Collaborate with the design team and provide design feedback for manufacturability, serviceability, and reliability
• Design tools and apply third-party equipment to support production

Skills: DOE Support, Process Documentation, Automation Development, Equipment Validation, Automotive Compliance, KPI Analysis, DFM Feedback, Tooling Design

• Support operations by leading and directing technical activities necessary to solve problems encountered from receiving through shipping
• Ensure the team takes the necessary steps through effective communication and proper documentation to avoid similar problems in the future
• Develop and maintain process guidelines (SOP/SOC) and training programs for the integration of new products and systems
• Continually strive to reduce process variation (improve process capability) to ensure consistent product quality and adherence to manufacturing standards
• Lead cost reduction initiatives through materials, product, and process improvements
• Assist the project teams in holding brainstorming sessions and developing action plans for activities to reduce utilities consumption, cycle times, scrap, downtime, material usage variance, and direct labor
• Drive the updating of manufacturing standards as a result of performance improvements
• Develop work cell layouts in an effort to optimize material flow and support 5S and visual management initiatives
• Initiate new equipment and technologies to maintain the company’s competitive advantage
• Utilize continuous improvement tools and lean tools to achieve KPI targets

Skills: Technical Leadership, Root Cause Analysis, SOP Development, Process Capability, Cost Reduction, Performance Improvement, Cell Layout Design, Lean Tools

• Assists the Production Team by setting up equipment to manufacture quality products at targeted production rates
• Assists the Production Team by training new setup persons
• Meets Process Engineering schedules established by the Operations Manager
• Conducts designed experiments as outlined by the Design Engineer or Operations Manager and makes necessary adjustments throughout the study
• Collects data for process studies and assists with measurements for these studies
• Documents actions by completing documentation related to projects and tasks
• Applies knowledge of product design, fabrication, assembly, tooling, materials and production history to evaluate a manufacturing/production process
• Maintains a safe and clean work environment by complying with procedures, rules, and regulations
• Contributes to team effort by accomplishing related tasks
• Responsible for working safely and maintaining a safe work environment
• Attends required training, identifies and reports hazards, and is accountable for self as well as co-worker safety
• Participates in the creation of work instructions and procedures for the manufacturing process

Skills: Equipment Setup, Setup Training, Experiment Execution, Process Data Collection, Technical Documentation, Manufacturing Evaluation, Work Instruction Writing, Safety Compliance

• Troubleshooting in the daily business of operations units
• Monitoring and improvement of the energy efficiency of operational units
• Support and execution of concept and feasibility studies in-house or in cooperation with external contractors
• Support project teams during Basic and Detail Engineering with external contractors
• Support during Process Hazardous Analysis (PHA) for operations units
• Optimization of operations units about capacity and safety
• Improve reliability and ensure sustainable operation of operations units
• Participation in incident investigation and development of solutions to prevent similar situations in the future
• Contribution to technical networks with local and international participants to help share experiences all over the company
• Simulation and modelling of processes with different simulation tools

Skills: Operational Troubleshooting, Energy Efficiency, Feasibility Studies, Engineering Support, Process Hazard Analysis, Capacity Optimization, Reliability Improvement, Process Simulation

• Defines standards with the Centerline of equipment
• Utilization of troubleshooting software and resolving relevant issues
• Conduct process analysis and development/improvement for the manufacturing function
• Conduct productivity analysis and development/improvement for the manufacturing function
• Collaborate with a cross-functional team to lead and drive project completion
• Collaborate with external parties to lead and drive project completion
• Six sigma continuous improvement of existing in-house ceramic brazing, plating and assembly processes
• Explore and develop innovative ceramic brazing, plating and assembly mass manufacturing processes for further Dyson ceramic technology roadmap

Skills: Centerline Standards, Software Troubleshooting, Process Analysis, Productivity Analysis, Project Leadership, Supplier Collaboration, Six Sigma Improvement, Process Innovation

• Supporting current electrical assembly processes within semiconductor manufacturing to ensure a smooth manufacturing flow
• Supporting the introduction of a new product line, including the qualification of processes and products
• Using Process Improvement techniques, such as DMAIC, to ensure high yields are maintained
• Using quality tools such as PFMEA, Process Flows, and Control Plans
• Identifying and evaluating new manufacturing techniques that align with the company's goals
• Supporting lean manufacturing techniques, including 5S, Value Stream Mapping, Kaizen
• Liaising with suppliers to ensure current materials are up to standard, and researching new materials

Skills: Process Support, New Product Introduction, DMAIC Methods, PFMEA Planning, Control Plans, Manufacturing Innovation, Lean Tools, Supplier Management

• Participates in the identification, planning and execution of projects involved with process improvement
• Supports the qualification of new equipment
• Participates in troubleshooting and resolving equipment, systems, and process problems to prevent the occurrence of product nonconformity
• Designs experimental protocols using statistical tools to determine process response to controllable factors
• Develops and implements equipment and/or process enhancements that will improve efficiency, product yield, quality, and safety
• Provides training and support to Operations personnel

Skills: Process Improvement, Equipment Qualification, Equipment Troubleshooting, Experiment Design, Statistical Analysis, Yield Improvement, Process Enhancement, Operations Training

• Optimize the existing processes by identifying cost, quality, and environmental improvement opportunities and recommending a course of action
• Developing and undertaking trials and implementing process changes
• Working with research facilities, consultants, labs, and industry peers to investigate and resolve operational and customer quality issues
• Assist with the development of technical and financial justification for capital projects
• Work with department supervision to improve the overall operation of the plant
• Act as process expert on a cross-functional team investigating the root cause of significant mill events
• Chemical cost tracking and reporting and grade recipe development and refinement
• Champion the training, development, and maintenance of the Data Historian (ParcView)
• Participates in and leads hazard assessments, HAZOP studies, and management of change processes

Skills: Process Optimization, Trial Execution, Quality Issue Resolution, Capital Justification, Cross-Functional Leadership, Root Cause Analysis, Chemical Cost Tracking, HAZOP Management

• Provide technical support to the Quality Control and manufacturing teams on the manufacture and testing of all products
• Take a leading role on behalf of manufacturing for the introduction of new products into the factory
• Manage, and/or participate in, small group improvement activities aimed at improving manufacturing performance whilst reducing TCOQ
• Reducing out-of-specification product manufacture and improving Right First-Time manufacture through RCA investigation and statistical analysis
• Work to reduce the number of faulty batches through the development of preventative systems utilising the batch abnormality reporting system
• Investigate problem batches and report on the appropriate action required promptly
• Identify root causes of non-right first-time batches
• Providing and implementing preventative actions promptly
• Ensure that the product specifications and formulations are suitable for production and in line with customer requirements when introducing new products
• Undertake regular pre-manufacture reviews, post-manufacture reviews
• Comply with safety requirements, continuously seeking potential hazards
• Actively participate in safety improvement tasks according to safety policies and 5S standards to maintain a safe, efficient and comfortable working environment
• Provide technical assistance to the plant and QC in the reworking of out-of-specification material
• Complete training of Paint plant personnel in the technical aspects of paint manufacture
• Take a leading role in small projects (capital and non-capital) to drive productivity and quality efficiencies in the factory

Skills: Quality Support, New Product Intro, Continuous Improvement, TCOQ Reduction, Root Cause Analysis, Stats Analysis, Preventive Actions, Safety 5S

• Develop heat and material balances, process flow diagrams, and piping and instrument diagrams including line sizing and design/operating conditions
• Prepare equipment sizing data sheets including aeration and mixing equipment
• Prepare hydraulic profiles
• Incorporate technical specifications and development of clarifications
• Verification/analysis of process guarantee values
• Develop control scheme and instrumentation requirements
• Relief valve and regulator sizing for equipment, pressure vessels and low-pressure tanks
• Review sub-supplier vendor information for technical acceptability
• Frequent direct interface with customers' technical personnel at various technical meetings throughout the project
• Assist in the development of the operating manual and training material
• Assist in the startup of the facility 

Skills: Material Balances, PFD Drafting, ID Design, Equipment Sizing, Hydraulic Profiles, Control Design, PSV Sizing, Vendor Review

• Apply Lean Manufacturing and Design principles
• Assess advanced design themes/models to ensure compliance and compatibility with Paint Shop processes
• Produce Process Failure Mode and Effect Analysis documents to ensure risks are mitigated
• Ensure adherence to Integrated Production System (IPS) deliverables
• Manage technical issues and escalate
• Contribute to the development and submission of departmental responses to product letters (PDL), etc.
• Support and lead virtual build events, raising and managing issues
• Create, validate and issue process instructions for the Paint Production Team
• Undertake any other work as directed by their line manager in connection with their job from time to time

Skills: Lean Manufacturing, Design Principles, Process Analysis, Risk Mitigation, IPS Compliance, Technical Management, Virtual Builds, Process Instructions

• Focusing on existing products or processes
• Routinely coordinating work with other specialists and operating groups to facilitate maintenance and direct others 
• Collaborate with key partners of functional areas to coordinate planning, organization, and engineering projects with constraints of specific objectives and target dates
• Use of statistical methods/tools for process improvement
• Develop and implement process control strategies for the cells per the facility's long-term plan
• Perform conventional, less sophisticated engineering assignments that may involve design, testing, preparation of specifications, process studies, or research investigations

Skills: Process Optimization, Cross-Functional Coordination, Project Planning, Statistical Tools, Process Control, Engineering Support, Design Testing, Specification Development

• Develop manufacturing processes, process improvements, and provide related technical support
• Provide manufacturing support for consumer products manufacturing in an FDA/cGMP-regulated environment
• Utilize the PDCA principle to validate and maintain all manufacturing processes
• Provide production line support including implementing process improvements, troubleshooting equipment, and addressing technician inquiries
• Utilize LEAN, Six Sigma, and other best practice tools and principles for day-to-day problem solving and continuous improvement
• Perform cost analysis of engineering projects assigned to reduce the cost of manufacturing without impairment of quality
• Work with production leaders to train technicians on how to manufacture products, proper material routing and handling methods, new equipment/fixture operation, troubleshooting and maintenance, among other areas 
• Assist in investigating and solving production problems
• Interface with other department resources (i.e., R&D, Validation, quality, etc.) to successfully facilitate product launches

Skills: Process Development, FDA Compliance, PDCA Validation, Line Support, Lean Six Sigma, Cost Reduction, Technician Training, Product Launches

• Gathers information to evaluate current work processes to determine the flow of work, time requirements, costs, and duration
• Develops strategies and programs that improve the productivity and efficiency of the various work processes of the company
• Standardizes the improved processes across the unit, department, facility, and organization
• Supports Technical and Corporate Process Engineering efforts in developing the industrialization of new processes and/or procedures within the plant
• Works to improve process capability and OEE (Overall Equipment Effectiveness) through standardization of process improvement activities and opportunities
• Responsible for assisting in the review of equipment failures and analyzing equipment histories 
• Identify trends in specific repetitive failures, to effectively identify root causes and address identified areas for improvement with Corporate Process Engineering
• Identifies potential for cost reduction through improved equipment reliability and process capability by equipment and or process modifications that extend parts life, reduce labor cost, and other reliability-related improvement techniques
• Implements best practices in an effort to maintain standardization and improve equipment and process performance
• Assists in the development and standardization for new construction and equipment purposes
• Applies various industrial engineering problem-solving and productivity techniques to evaluate the improvement of recommended strategies and programs
• Instructs others in process improvements, including the use of various problem-solving and productivity techniques such as process mapping and cost time management
• Facilitates employee teams to build cohesiveness and improve the overall results of the respective teams' tasks
• Provides adequate reporting to plant management and Corporate Process Engineering that identifies areas of opportunity and documents progress on improvements designed, implemented and controlled by their efforts

Skills: Process Evaluation, Productivity Improvement, Process Standardization, Industrialization Support, OEE Improvement, Equipment Analysis, Cost Reduction, Team Facilitation

• Implement Next Generation Automation Techniques where possible to improve production processes
• Define, build, qualify and support new and existing custom process equipment and evaluate equipment safety
• Support and implement the transition of products and manufacturing processes from R&D to production
• Work with other functions such as chemists, manufacturing engineers, maintenance and production staff to evolve production processes through the application of technical and lean manufacturing processes
• Actively improve products, equipment and processes to meet agreed objectives as part of the Continuous Improvement (CI) program, for improved control, quality or production output
• Define and implement automated manufacturing processes and equipment to ensure both product volume, operator safety and quality targets are met
• Implement calibration processes to ensure the equipment functions correctly
• Work with suppliers to ensure achievement of goals for cost, quality and delivery
• Institute protocols to ensure a safe work environment and to identify and correct any safety issues within the work environment
• Support the training of production operatives in the safe use of production equipment
• Repair/replacement of damaged components to ensure the equipment functions to the correct specifications
• Resolve equipment failures with a focus on root cause(s)
• Lead and assist with defining and implementing corrective and preventative actions, and the resolution of audit findings
• Carry out Preventive Maintenance checks and servicing on large-scale processes, equipment and documents using ISO 9001 Quality System
• Carry out Validation Processes, including FAT/SAT and IQ/OQ/PQ, ensuring documentation meets both ISO9001 and customer requirements

Skills: Automation Techniques, Equipment Qualification, R&D Transition, Lean Manufacturing, Continuous Improvement, Calibration Processes, Safety Protocols, Validation Processes

• Ensure process performance of all areas of the mill, including being the primary point of contact for process problems, identifying improvement opportunities, ensuring product quality, and developing projects and seeing them to completion
• Provide Operations support, guidance and training
• Perform CI project work and support
• Perform process improvement project/MOC development and execution
• Perform administrative tasks and drawing updates
• Perform product quality management

Skills: Process Performance, Issue Resolution, Quality Assurance, Project Execution, Operations Support, CI Projects, MOC Development, Training Delivery

• Monitor daily production processes by means of the collection, analysis and interpretation of data and data trends
• Make necessary adjustments based on data analysis with the aid of testing and measurement equipment
• Troubleshot production disruption events and solved acute problems through the correlation and interpretation of data, working under strict time constraints and in cooperation with manufacturing staff
• Draw up, monitor and safeguard the setup list and working rules and instructions and supervise production staff in the performance of adjusted processes
• Determine steps for the reprocessing and designation of any products that fall short of quality requirements in consultation with the (technical) Marketing department
• Implement projects and manage project-related activities
• Propose CI projects by looking into the detailed manufacturing process
• Assigning sub-plans to project staff
• Manage project staff or any project teams and monitor project progress based on interim results
• Implement Sourcing and NPD and Capability Project
• Reporting on progress and drawing up reports
• Safely archive group information and knowledge to build a database for long-term business long term operation
• Record, manage and maintain information in security, such as machine settings, preparations, specifications and system-based quality data, as well as information generated by trials, troubleshooting activities and projects
• Actively follow external technological developments and identify and assess developments in terms of their potential applicability

Skills: Production Monitoring, Data Analysis, Process Troubleshooting, Quality Control, Project Management, CI Proposals, NPD Implementation, Knowledge Management

• Support business plan goals
• Develop and monitor tasks to ensure goals
• Develop, review, approve, and implement SOPs and all other documents for Process Safety Management and Flammable Solvent handling
• Lead Alkermes Process Safety Management program covering drug substance and drug product manufacturing, working closely with Engineering, Manufacturing and Process Development at the Wilmington site
• Manage multiple, often concurrent, projects and meet associated deadlines
• Ensure that all Process Safety Management is conducted timely and accurate manner
• Perform a variety of Risk Analysis Techniques including Dust Hazard Analysis and Hazardous Area Classification on Chemical and Combustible Dust Processing Systems
• Assist with safety evaluations and risk assessments (JHA, PHA, etc.) of new products, processes, facilities, and equipment and recommend CAPA actions to improve safety performance
• Provide technical support to the Alkermes facility EHSS team and other stakeholders, including engineering/ process hazard reviews and incident investigation/ root cause analysis
• Communicate across functions and disciplines, and present data to key stakeholders to drive Process Safety excellence
• Develop Process Safety Information and Mechanical Integrity program, lead incident investigations and HAZOP studies and implement the Management of Change system

Skills: Business Planning, Task Monitoring, SOP Development, PSM Leadership, Risk Analysis, Safety Assessment, Incident Investigation, Cross-Functional Communication

• Perform interviews with internal stakeholders to discover and document their existing workflows and analyze critical pain points
• Identify inefficient systems processes through data analysis and qualitative user research and generate Business Process strategies to streamline critical path processes throughout the business
• Perform gap analysis on existing Business Processes and provide recommended solutions based on business goals
• Establish data visualisation dashboards on KPIs and customised reports that track Continuous Improvement and operational health metrics
• Develop release plans and timelines for new feature launches involving Business Process updates
• Develop creative solutions to apply business logic and ensure that collected data is within the required quality standards
• Drive new Business Process rollout and change management to ensure business readiness and transfer of knowledge for any new process/system, including and development and presentation of any training materials for departmental stakeholders
• Provide analytic support and business context to identify and drive critical growth initiatives

Skills: Business Process Mapping, Workflow Analysis, Gap Analysis, KPI Dashboards, Release Planning, Data Quality, Change Management, Growth Initiatives

• Knowledge of statistical analysis methods (DOE, Gage RandR, etc.)
• Good understanding of problem-solving techniques
• Failure Modes and Effects Analysis Experience
• Able to work independently and in a group
• Good understanding of key aspects of packaging optoelectronic devices
• Good understanding of the reliability of packages and the impact of packaging on device reliability
• Experienced in Statistical analysis software (JMP, Minitab, etc.)
• Fluent in Microsoft Office Applications (Excel, Word, PowerPoint, project)
• Strong interactive skills in general communication, cross-functional participation and influence, mentoring and acceptance of guidance, technical leadership, project management, coordination with cross-functional team members, team behavior, and support for subordinates, junior engineers, technicians, and management.
• Strong technical problem-solving skills.
• Ability to communicate effectively both verbally and in writing
• Knowledge and use of relevant PC software applications and skills to use them effectively.

Qualifications: BA in Chemical Engineering with 6 years of Experience

• Experience in Aluminum, Plastic and Cast Iron processes
• Good knowledge of materials, molding, casting simulation software (magma)
• Experience in CAD, CAM, and Mold Flow Analysis
• Experience in the Automotive Industry
• Strong knowledge of MS Office Applications
• Having experience in Project Management
• Excellent verbal and written skills in English
• Ability to develop (through formal training or experience) technical capabilities that create flexibility within the engineering team, e.g., heat treat engineers to develop knowledge of the turning process.
• Ability to organize, evaluate and summarize data
• Ability to serve as project manager on complex projects, including defining project scope, selecting consultants, negotiating contracts, amendments and change orders, preparing and monitoring project schedules, and monitoring, reviewing and coordinating project design.
• Ability to serve as an expert in engineering, manufacturing, advanced development, and be able to analyze designs which include process drawing, tooling, programming, problem-solving, etc.

Qualifications: BS in Industrial Engineering with 5 years of Experience

• Good written and spoken English skills
• Strong communication skills and team spirit.
• Ability to conduct activities in the application of standard techniques and procedures.
• Ability to work with other operating areas to address machining, tooling and maintenance issues that may arise in the manufacturing process.
• Ability to manage multiple tasks and show maximum progress on high-priority tasks without ignoring others.
• Ability to work closely with manufacturing management in the assigned department and make recommendations for, and manage the implementation of, capital equipment and process improvements.
• Ability to seek new improvement opportunities and propose to management.
• Ability to provide technical support for manufacturing processes and associate
• Ability to set individual goals that are in alignment with plant objectives and monitor progress.
• Ability to maintain contact with Timken Research, other plants and external resources to share and leverage information.
• Ability to recommend changes in design and methods and provide financial justification for these changes.
• Ability to utilize new or current technologies (leverage capital) to expand and/or improve current manufacturing methods or processes.
• Ability to document current procedures, methods and tooling and capture improvements as they are developed.
• Ability to document test procedures and results, numerical and graphical data and make recommendations for further changes in process or procedure.

Qualifications: BA in Mechanical Engineering with 6 years of Experience

• Experience in developing or improving existing chemical transformations, which includes design and fabrication and validation need process tools
• Experience with both product and process development and transferring processes from RandD into manufacturing
• Proven track record of technical leadership of a project from inception to product release
• Computer skills and experience with software-controlled products or processes
• Ability to apply a diverse knowledge of engineering principles to a broad range of assignments.
• Hands-on ability to prototype and troubleshoot, product, and process problems
• Initiative and follow through in executing project responsibilities, overcoming obstacles, and balancing multiple priorities effectively
• Knowledge of CAD (SolidWorks or Pro-E)
• Interpersonal skills and the ability to work in a team environment
• Ability to work in a matrix organization with multiple locations
• Experience with ISO 9001 QMS
• Experience in the chemistry innovation field or chemical manufacturing
• Written and oral communication skills

Qualifications: BS in Manufacturing Engineering with 4 years of Experience

• Experience in the Medical Device/Pharmaceutical industry
• Experience in New Product Introduction activities
• Experience in CAPA closure and/or Quality Investigation Report activities.
• Experience with leading DMAIC Six Sigma projects 
• Experience with developing and implementing Lean Systems and Standard Work.
• Solid analytical and statistical skills.
• Solid interpersonal and communication skills, both written and oral.
• Cross-functional team contributions and leadership skills
• Experience in process or project engineering within the manufacturing industry.
• Ability to communicate clearly and effectively in a professional manner, both orally and in writing, at all levels within and outside the organization
• Proven analytical and problem-solving skills
• Ability to think outside the box, demonstrate creativity and innovation

Qualifications: BA in Environmental Engineering with 3 years of Experience

• Experience in Production manufacturing engineering with emphasis on OEE and Manufacturing process improvements, Process and Equipment Design, and Project management
• Experience managing people and projects 
• Experience in a food-grade environment (FDA, GMPs, HACCP) with high-speed packaging equipment 
• Excellent computer skills, extensive Process and Packaging equipment design and operation, automation and controls (PLC, DCS, etc.) knowledge
• Solid analytical skills, demonstrated excellent interpersonal and Project Management skills
• Demonstrated proficiency in the use of Process Excellence tools and Design for Six Sigma DFSS, DMAIC, DOE, VSM, RCA, FMEA, etc.
• Must have Lean 6-Sigma Green Belt certification or equivalent, Certified PMP 
• Familiar with Auto-Cad/Draft site

Qualifications: BS in Manufacturing Engineering with 3 years of Experience

• Ability to interpret complex mechanical or electro-technical drawings
• Ability to work within tight deadlines
• Ability to operate productively with others
• Proficient with CAD/AutoCAD/Inventor
• Ability to pay attention to minute detail
• Excellent Computer skills (thorough working knowledge of MS Word, Excel, PowerPoint, Access)
• Ability to analyze, evaluate, and communicate complex information with ease
• Dynamic personality with integrity, positive attitude, practical and proactive approach
• Engineering experience in an industrial or manufacturing environment
• Working experience in VB and Siemens/AB PLC programming 
• Experience with C#

Qualifications: BS in Chemical Engineering with 4 years of Experience

• Industrial experience and/or training, or equivalent combination of education and experience
• Prior experience with injection molding plastics, ceramics 
• Experienced with ACAD or Solid Works
• Strong written and verbal communication skills
• Ability to effectively present information and respond to questions from groups of managers, clients, and customers
• Strong organizational and interpersonal skills
• Ability to effectively manage the cost and time constraints and deliver tasks and projects to conclusion with desired results
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
• Demonstrate analytical skills/problem-solving skills such as identifying problems, recognizing symptoms, causes, and alternative solutions, and making timely, sound decisions based upon facts
• High degree of self-motivation and ability to work independently, in a team environment, and with employees at all levels within the organization

Qualifications: BS in Mechanical Engineering with 6 years of Experience

• Experience in investigating, developing, and implementing new manufacturing processes and improving existing manufacturing processes
• Willing and able to execute hands-on, perform experiments 
• Understand how important vital qualifications are to the life-cycle of a product - IQ/OQ/PQ
• Able to analyze data from a variety of sources (machines/databases/people) and draw insightful conclusions to assist others
• Must be comfortable in a range of software packages to perform modeling/analysis (Python)
• Strong ability to work diligently with minimal supervision and take initiative to drive project deadlines
• Good at capturing goals, to-dos, and decisions made for yourself and those around you
• Able to work independently and be a team player

Qualifications: BS in Biomedical Engineering with 2 years of Experience

• Experience with semi-solids and liquid formulations
• Working knowledge of manufacturing processes and equipment for semi-solid and liquid formulations
• Knowledge of scientific methods, DoE and QdB
• Technical writing skills for scientific documents as demonstrated by skill in problem solving and critical thinking
• Knowledgeable in cGMPs and general regulatory requirements
• Good written and verbal communication skills
• Experienced with the investigational techniques and tools for process investigations and Technical Risk Assessment
• Knowledgeable in the principles of process validation
• Statistical knowledge and use of Statistica
• Proficient with Microsoft Word, Excel, and PowerPoint

Qualifications: BS in Materials Engineering with 4 years of Experience

• Experience in a Process Engineering role in the Pharmaceutical Industry
• Experience in LEAN manufacturing 
• Strong analytical knowledge using fundamental engineering principles
• Experience in the development of large-scale Biopharma projects
• Effective communication skills and time management principles
• General understanding of Good Manufacturing Practices (GMP)
• Experience in a manufacturing environment in pharmaceutical manufacturing
• Knowledge of and/or direct experience in a cGMP environment 
• General knowledge of chemical operations, equipment and manufacturing operations
• Proficient in Windows-based environment including word processing, spreadsheet and data base programs

Qualifications: BS in Industrial Engineering with 5 years of Experience

• Strong problem-solving skills
• Experience in a highly regulated GMP environment
• Experience of Sterile Manufacturing Operations 
• Experience in syringe filling 
• Must have excellent communication skills
• Strong interpersonal and leadership skills
• Strong coordination, project management and planning skills
• Customer-focused decision-making skills
• Strong understanding of maintenance, reliability, safety, quality and regulatory
• Experience with change control, deviation management and associated compliance activities and systems

Qualifications: BS in Automation Engineering with 3 years of Experience

• Experience in manufacturing process development work in optics, micro-mechanics, electronics and/or micro-electronics assembly and integration
• Good communication, organizational and interpersonal skills
• Ability to solve problems through fact-based decision-making processes
• Experiences or courses in Lean and/or Six Sigma
• Experiences or courses in optics/photonics 
• Experiences or courses in electronics or software automation
• Proficiency in SolidWorks Design Software 
• Proficiency in FEA and analysis by simulation 
• Automotive experience or work in another highly regulated work environment 

Qualifications: BS in Engineering Physics with 4 years of Experience

• Ability to work hands-on, collaboratively and with passion and energy as part of an agile team
• Understanding of process management and lean techniques
• Passion for simplification, Logical and structured thinking and comfort with both data analysis and ambiguity
• Ability to pragmatically break down complex problems
• Understand the key drivers and the improvement areas that will result in the biggest impact(s)
• Demonstrated ability to deliver tangible results in compressed timeframes across several sectors and operational environments (e.g., branch, call centre, back office, product, etc)
• Demonstrated ability to communicate effectively in all forms and simplify complex messages to stakeholders at all levels
• Experience with agile methodology and ‘getting stuff done’
• Production management experience, packaging equipment principles and operation
• Knowledge of Aseptic Filling, Packaging and Labelling and or Tablet Packaging
• Strong knowledge of TGA requirements and International cGMPs
• Familiarity with pharmaceutical processing and packaging equipment principles and operation
• Knowledge of Aseptic filling, Packaging and Labelling

Qualifications: BS in Aerospace Engineering with 6 years of Experience

• Experience in MS Office (Word, Excel, PowerPoint, MS Project)
• Experience in writing technical documents, including validation documents, procedures, and reports
• Must have a strong ability to organize and manage multiple tasks in a fast-paced environment
• Ability to work effectively with team members and work under minimal supervision
• Must have strong project management skills and the ability to lead and train others in a matrixed environment
• Significant experience in a manufacturing plant environment
• Proficiency in the application of statistical methods
• Effective communication (both oral and written) skills 
• Demonstrated ability to present ideas without formal authority
• Good problem-solving skills
• Demonstratable team working skills across different functions and levels
• Capability to teach and a high desire to learn

Qualifications: BS in Food Engineering with 5 years of Experience

• Experience of manufacturing work experience
• High volume, continuous manufacturing environment, Process Engineering / Manufacturing Engineering / CI skills and expertise
• Must have an analytical approach and be a results-oriented problem solver
• Good people skills and are a hands-on individual
• Must have Six Sigma green/black belt and knowledge of DOE 
• Knowledge of HACCP and FSMA requirements
• Knowledge of mistake-proofing and PLC programming 
• Ability to manage multiple priorities or projects simultaneously and keep them progressing to completion
• Well-versed on statistical tools such as SPC, QC Tools, FMEA, DOE and software like Minitab
• Excellent written and verbal communication skills

Qualifications: BS in Chemical Engineering with 4 years of Experience

• Experience working within the Chemical / Pharmaceutical industry 
• Working experience in API/small molecule 
• Possess good interpersonal and communication skills
• Ability to troubleshoot and problem-solve
• Strong collaborative skills with an ability to work effectively in a team environment or on one’s own initiative without close supervision
• Previous experience in the scale-up or tech transfer of new products
• Must have Operational Excellence certification (yellow, green, black belt)
• Knowledge of Process Validation
• Knowledge of CAPA and NC Investigations, Complaints Investigations
• Knowledge of the ISO 13485 norm
• Experience in a regulated industry environment, like medical devices
• Very good command of English

Qualifications: BS in Mechanical Engineering with 6 years of Experience

• Experience in a medium/high-volume manufacturing environment (injection molding, assembly, etc.)
• Demonstrated superior communication (written and verbal), teamwork, and organizational skills
• Demonstrated ability to think out of the box and recommend options
• Must be able to work with little direction and with a high level of self-motivation
• Ability to independently define problems, collect data, establish facts, prioritize, and draw valid conclusions to accomplish goals
• Ability to interact effectively with a wide variety of personality types
• Ability to independently define problems, collect data, establish facts, prioritize, and draw valid conclusions to accomplish goals
• Able to manage details and provide appropriate follow-up to ensure full internal and external department satisfaction
• Ability to effectively present information and respond to questions
• Ability to interact effectively with a wide variety of personality types
• Ability to work effectively in a team environment
• Extremely detail-oriented including the ability to read small print
• Effective organizational skills
• Excellent problem-solving skills
• Ability to multitask effectively
• Flexibility and a willingness to learn new things

Qualifications: BS in Industrial Engineering with 8 years of Experience

• Practical and analytical engineering background with knowledge in industrial process control systems, continuous improvement and lean manufacturing methods
• Strong analytical skills and a methodical, structured approach
• Knowledge of manufacturing tools including statistical analytics, FMEA, inspection plans and application of problem-solving methods such as root cause analysis techniques
• Strong focus on quality, quickly identifying key priorities and working towards effective solutions
• Experience in defining standard operating procedures and knowledge of controlling factors, minimising waste and improving process uptime
• Excellent documentation and presentation skills
• Able to build good relationships across all cultures both internally and externally

Qualifications: BS in Biomedical Engineering with 2 years of Experience

• Must be a team player able to work in a fast-paced environment 
• Demonstrated ability to handle multiple competing tasks and demands
• Strong communication skills such as oral, written and presentation
• Strong organization, planning and time management skills to achieve results
• Strong personal and professional ethical values and integrity
• Proficient in Microsoft Office programs (Outlook, Word, PowerPoint, and Excel)
• Strong interpersonal and collaboration skills to work effectively with all levels of the organization including suppliers and/or external customers
• Excellent in English and Spanish
• Experience in training/ educating people on new technologies/processes
• Experience in process change management
• Must have RFID knowledge 

Qualifications: BS in Materials Engineering with 4 years of Experience

• Experience working in the relevant field within the Pharmaceutical industry/ working in a Technical Engineering environment
• Deep technical and scientific knowledge to drive process optimisation and robustness
• Proven track record in process development, support and improvement
• Ability to organise, plan and execute multiple tasks to tight schedules
• Demonstrated ability to implement continuous improvement methods to improve quality and operational performance
• Ability to read plans, diagrams and blueprints
• Familiarity with DOE (Design of Experiments) and SPC (Statistical Process Control)
• Able to fully utilize spreadsheet functions (Excel), write technical reports (Word), and prepare presentations (PowerPoint)
• Able to communicate with people of widely varying educational and skill levels
• Ability to read, speak and understand English

Qualifications: BS in Systems Engineering with 5 years of Experience

• Experience in Process development in the Automotive Catalyst industry, specific to OEM Catalyst converter
• Strong experience in WC preparation, coating processes and testing equipment
• Good Knowledge of systems to handle customers and audits
• Technical mindset, close attention to detail and high observation ability, organizational skills, determination, target-driven, solution-oriented, good communication and presentation skills
• Previous experience in Process Engineering
• Knowledge of Resistive Welding/ Selective soldering/ Laser Marking/ Sensors/ Pneumatics/ Camera systems/ Printers
• Knowledge of specific tools such as MTM, DOE, PFMEA, Control Plan, Process capability, MSA, etc.
• Good spoken and written interaction in English
• Proficient MS Office user
• Ability to focus on results and solve problems

Qualifications: BS in Engineering Physics with 4 years of Experience

• Experience within blade design, design for manufacturing, and knowledge of CATIA composite V5 from a development perspective
• Must have practical experience of composite manufacturing, good understanding of machining and knowledge in areas such as carbon fibre, glass fibre etc
• Experience with thermoset resin systems such as Epoxy and Polyurethane chemistry
• Extensive knowledge of NDT methods such as Thermography, Ultrasonic Testing or Laser Shearography
• Experience with running optimization and process development projects in manufacturing environments
• Experience with Experimental design / Multivariable data analysis both planning and treatment of statistical data and tolerance analysis
• Strong communication skills in English, oral and written
• Experience in the biopharmaceutical or pharmaceutical industry 
• Multidisciplinary knowledge of a wide range of scientific and engineering principles
• Highly motivated individual with the ability to work independently and on cross-functional and cross-site teams
• Basic understanding of biologics manufacturing
• Experience with data analysis and/or scientific programming (Matlab, R, Python)
• Strong technical writing and presentation skills

Qualifications: BS in Environmental Engineering with 7 years of Experience

• Must be able to work independently while reporting the primary results of their activities to his/her supervisor
• Excellent cooperation with production, technical and operations departments within the Business Lines
• Experience in process technology and/or operations management, as well as in Evonik’s manufacturing processes
• Experience with process techniques in mechanical and thermal processes, process design, manufacturing technology, automation of processes and/or methodologies of operations management
• Must be able to work and excel in a project team environment and adapt to variable situations
• Must have a stringent attitude to working safely in design and operations
• Able to be a self-starter and energetic, keen to learn about new materials and technologies
• Able to be a strong communicator and team player
• Ability to identify and develop relationships with internal and external parties
• Able to pay close attention to detail and focus on the quality of delivery

Qualifications: BS in Industrial Engineering with 5 years of Experience

• Experience in process or industrial engineering
• Knowledge of production machinery and job-related service delivery equipment and processes
• Proficiency with analytical tools, workflow time study, and process balancing
• In-depth understanding of lean manufacturing principles
• Demonstrated abilities in mechanical/electrical design, repairs and maintenance
• Knowledge of documentation practices associated with cGMP operations (SOPs, batch records, calibration and maintenance records, equipment logbooks, change control, etc.)
• Knowledge of Metrology and instrumentation calibration practices
• Exhibit strong technical writing ability to clearly and effectively communicate technical ideas and concepts

Qualifications: BS in Manufacturing Engineering with 3 years of Experience

• Good knowledge of engineering, health and Safety and legislation
• Analytical and conceptual skills, technical judgement and design knowledge
• Knowledge of Continuous Improvement (CI) processes and programmes
• Placement experience in the Food Industry
• Working experience in the engineering discipline with extensive design experience
• Self-starter with a professional leadership approach and a technical background
• Proven experience within a nuclear or highly regulated environment
• Motivated team member with the ability to work to deadlines and communicate project progress
• Good communication skills and the ability to articulate information
• Ability to interface and liaise with key clients and internal stakeholders
• Committed to Continuous Professional Development

Qualifications: BS in Chemical Engineering with 4 years of Experience

• Experience in operational, quality, food tech or process background in an FMCG company
• Ability or experience to manage projects and motivate the operations team
• Analytical, report writing and proactive problem solver
• Able to be a self-motivator with the ability to find solutions and achieve objectives to drive outcomes
• Exceptional organisation and planning skills
• Strong team player with excellent interpersonal skills and understanding of different cultures/work environments
• Excellent communication and presentation skills
• Working knowledge of all relevant Microsoft Office packages (Word, PowerPoint, Excel)
• Knowledge of manufacturing processes, e.g., Compounding/Coating/Converting/web handling
• Working knowledge of SAP
• Experience in any of the following: PLC interrogation, Data gathering and analytics from manufacturing processes
• Awareness of DSEAR Regulations

Qualifications: BS in Systems Engineering with 5 years of Experience

• Combined experience in manufacturing, process and/or product engineering, or research and development
• Experience in a manufacturing environment
• Must have Lean Six Sigma Green Belt Certification
• Strong organizational and communication skills
• Effective project management skills with a proven track record of delivering projects on time and within budget
• Cross-functional team leadership experience
• Manufacturing experience in a Lean Manufacturing Environment
• Experience with 3D printing and tool design
• Must have initiative and excellent organizational skills 
• Ability to handle multiple projects of varying complexity
• Must be able to work independently and as a member of a team
• Demonstrated ability to effectively assist production floor personnel in resolving technical issues
• Possess good judgment as it relates to creative ideas, with the ability to manage the creative process with others

Qualifications: BS in Mechatronics Engineering with 6 years of Experience

• Able to work on own initiative, be self-driven to set goals and lead a team from within
• Demonstrated problem-solving abilities and innovation capabilities
• Excellent interpersonal and communication skills in line with Pfizer values of Courage, Excellence, Equity and Joy
• Good analytical and teamwork skills
• Working experience inthe  chemical industry
• Knowledge in Lean Six Sigma and continuous improvement
• Fluency in both written and spoken English
• Willing to learn new things and hardworking

Qualifications: BS in Automation Engineering with 3 years of Experience

• Knowledge of manufacturing and process improvement techniques
• Must be self-motivated, proactive and project-oriented
• Industrial experience with emphasis on process time study and manufacturing process automation in both system and equipment aspect
• Ability to lead project, communicate and interface with all level within the organization
• Ability to analyze, comprehend, implement, and improve processes
• Able to build and maintain positive relationships with colleagues combined with outstanding verbal and written communication skills in English
• Must have certifications in IT Security Standards and Process Frameworks (ITIL, PCI DSS, NIST, ISO27002 2013) 
• Experience in lean manufacturing principles including waste reduction
• Ability to work effectively and cohesively in a team environment
• Must be familiar with computer software and programs such as Axapta, MS Office, and IMS
• Experience in a manufacturing environment with strong analytical, problem-solving and statistical process control skills

Qualifications: BS in Aerospace Engineering with 6 years of Experience

• Familiarity with process control
• Excellent written and oral skills - Bulgarian and English
• Ability to work independently and collaboratively
• Extensive experience in LEAN management and ideally a REFA training
• Knowledge of analytical or problem solving techniques to identify and define the cause
• Very good computer skills - MS Excel
• Experience in automotive manufacturing processes
• Expert level knowledge in Vision Systems (Cognex, Viscom), Testing/Programming (CCS, Functional Tests) and Automation/ Robotics (PLC, Staeubli)
• Advanced Knowledge/ Experience of Lean and CIP Methods (e.g., PDCA, Six Sigma)
• High level of initiative and entrepreneurial mindset

Qualifications: BS in Environmental Engineering with 2 years of Experience

• Good technical and engineering knowledge of machinery
• Experience in implementing and maintenance of best practices across multiple sites
• Good understanding of printing and finishing machinery associated with the packaging and converting industries
• Project management experience and scheduling
• Strong interpersonal skills
• Experience in using KPI’s/performance measurement/benchmarking
• Must have a result-driven mentality and work to implement creative solutions to maximize value-added activities
• Strong statistical understanding to establish appropriate specifications and process guide rails to ensure a reliable/repeatable process
• Must have an analytical mindset that leverages data to draw insights
• Strong problem-solving skills and ability to work collaboratively with cross-functional groups to solve problems and influence internal and external groups

Qualifications: BS in Food Engineering with 5 years of Experience

• Experience in a similar position in a production plant (in the automotive industry)
• Experience in process changes in the area of ​​mass production
• Practical knowledge of SPC, FMEA, Six Sigma, APQP, Auto CAD, Lean, OEE, MTM
• Knowledge and ability to use methods of problem-solving in practice
• Very good communication and teamwork skills
• Independence, very good organization of work, and proactivity
• Very good English skills (B2)
• Experience in the metal field, especially cutting, cold forming, stamping, drilling, and welding
• Knowledge of PFMEA, problem-solving methodologies

Qualifications: BS in Manufacturing Engineering with 3 years of Experience

• Excellent project management skills
• Strong planning and organizational skills
• Ability to communicate with all levels of an organization
• Comfortable with change in a fast-moving environment
• Demonstrated success in the design and implementation of process improvement initiatives
• Detail-oriented and demonstrated ability to perform work with high degree of accuracy
• Knowledge of Lean Manufacturing principles
• Working knowledge of MS Office Products (Word, Excel and Outlook)
• Strong analytical and problem-solving skills
• Ability to read/write and understand English
• Experience with relevant manufacturing processes/ Lean manufacturing/wire harness 

Qualifications: BS in Biomedical Engineering with 2 years of Experience

• Strong record of team leadership in large-scale, rapid, process-driven environments
• Very strong analytical capabilities
• Ability to translate operational issues into workable solutions
• Excellent communication skills (written and verbal)
• In-depth knowledge of Lean Six Sigma and its practical usage
• Wide knowledge of change management and continuous improvement methodologies
• Effective technical and practical engineering skills and the ability to consistently deliver quality, accurate and timely work to Worley and its customers
• Good working knowledge of the fundamental requirements of process engineering and the basic requirements of other engineering fields
• Good working knowledge of applicable local and international standards and statutory and regulatory specifications
• Competent use of process engineering-specific software and relevant software such as MS Office Suite
• Engineering experience in the same or similar industry, and developing leadership skills

Qualifications: BS in Materials Engineering with 4 years of Experience