Ethan Miller

Austin, TX

(512) 347-8291

ethan.miller.dev@gmail.com

https://www.linkedin.com/in/ethanmiller

SUMMARY

Results-driven Manufacturing Test Engineer with 1+ years of experience in test automation, failure analysis, and production testing within electronics manufacturing. Proven record of improving test efficiency by 18% through process optimization and data-driven troubleshooting. Expertise in test development and data analysis to optimize manufacturing validation, mitigate defects, and drive product quality improvements in high-volume production environments.

SKILLS

Test Automation

Failure Analysis

Data Analysis

Fixture Design

Process Optimization

RF Testing

EXPERIENCE

Manufacturing Test Engineer I

NovaCircuits Inc. – Austin, TX

June 2025 – Present

• Developed automated test scripts and supported RF test systems, improving test coverage by 17% and reducing manual intervention during production validation.
• Assisted in troubleshooting hardware and system-level failures, reducing recurring defects by 15% through structured root cause analysis.
• Supported factory test operations and data collection systems, improving reporting accuracy and reducing data latency by 20%.
• Collaborated with engineering teams to validate test plans and fixtures, increasing first-pass yield by 14% across product builds.

Test Engineering Intern

MicroEdge Systems – Round Rock, TX

January 2024 – May 2025

• Executed functional and benchtop testing for electronic components, improving measurement accuracy by 16%.
• Assisted in developing test procedures and documentation, enhancing technician efficiency by 18%.
• Supported failure analysis investigations and corrective actions, reducing test cycle interruptions by 12%.
• Maintained test equipment calibration and compliance, improving operational uptime by 10%.

EDUCATION

Bachelor of Science in Electrical Engineering

University of Texas at Austin

Brandon Lee Carter

San Jose, CA

(408) 555-2193

brandon.carter.eng@gmail.com

https://www.linkedin.com/in/brandonleecarter

SUMMARY

Results-driven Manufacturing Test Engineer with 4+ years of experience in test systems, NPI support, and process optimization within electronics and RF manufacturing. Proven record of improving test throughput by 25% through automation and system enhancements. Expertise in test automation and yield analysis to optimize production efficiency, mitigate test failures, and drive scalable manufacturing solutions.

SKILLS

Test Automation

RF Testing

Yield Analysis

Test Systems

Data Infrastructure

Failure Analysis

EXPERIENCE

Manufacturing Test Engineer

SignalCore Technologies – San Jose, CA

March 2023 – Present

• Designed and deployed automated manufacturing test systems for RF products, increasing throughput by 27% and improving test repeatability.
• Led NPI test integration with contract manufacturers, reducing product ramp-up time by 22% across multiple programs.
• Analyzed production yield data and implemented improvements, increasing yield by 18% and reducing defect escape rates.
• Developed test strategies and validation plans, improving coverage and reducing test cycle time by 19%.

Test Engineer

Apex Embedded Solutions – Fremont, CA

June 2021 – February 2023

• Developed and debugged test hardware and software solutions, reducing test failures by 20% across production lines.
• Collaborated with cross-functional teams to define test specifications and acceptance criteria, improving measurement accuracy by 17%.
• Maintained test infrastructure and data systems, increasing system reliability by 23%.
• Supported troubleshooting and root cause analysis efforts, reducing recurring defects by 16%.

EDUCATION

Bachelor of Science in Electrical Engineering

San Jose State University

Christopher A. Reynolds

Seattle, WA

(206) 784-5521

christopher.reynolds.eng@outlook.com

https://www.linkedin.com/in/christopher-a-reynolds

PROFESSIONAL SUMMARY

Results-driven Manufacturing Test Engineer with 10+ years of experience in test strategy, NPI execution, and manufacturing automation within aerospace and advanced electronics industries. Proven record of reducing defect escape rates by 26% through scalable test system development. Expertise in test architecture and data-driven optimization to improve yield, mitigate production risk, and drive global manufacturing efficiency.

CORE SKILLS

Test Strategy

NPI Engineering

Test Automation

Data Analysis

DFT DFM

Yield Optimization

EXPERIENCE

Senior Manufacturing Test Engineer

AeroTech Dynamics – Seattle, WA

January 2020 – Present

• Led development of scalable manufacturing test architectures across global sites, reducing defect escape rates by 26% and improving deployment consistency.
• Directed NPI test strategy and validation execution, improving product launch efficiency by 24% and reducing ramp timelines.
• Implemented automated data systems and analytics pipelines, improving yield visibility and reducing decision latency by 30%.
• Collaborated with cross-functional teams to optimize test coverage and cost, reducing test cost per unit by 18%.
• Drove continuous improvement initiatives through root cause analysis, reducing recurring defects by 22%.

Manufacturing Test Engineer

Orion Embedded Systems – Portland, OR

May 2015 – December 2019

• Developed and deployed test systems for electronic and RF products, increasing throughput by 25% and improving system reliability.
• Led failure analysis and corrective action programs, reducing defect rates by 20% across production operations.
• Designed fixtures and automated test solutions, improving test efficiency by 21% and reducing manual effort.
• Managed supplier and contract manufacturer test integration, improving process alignment and reducing delays by 19%.

EDUCATION

Bachelor of Science in Electrical Engineering

Oregon State University

• Delivered end-to-end test engineering support for manufacturing stations, covering calibration, data acquisition, software controls, maintenance, and troubleshooting, reducing downtime by 22% and improving first-pass yield by 15%.
• Provided electronics engineering support across products and processes, resolving design-for-test gaps and improving defect detection accuracy by 18% through enhanced instrumentation and circuit-level diagnostics.
• Collaborated with design and product engineering to transition 10+ new products from development into production, ensuring test readiness, validating specifications, and reducing ramp-up time by 25%.
• Optimized existing test solutions via targeted hardware upgrades and software automation, increasing throughput by 30% while lowering test cycle time variability and minimizing operator intervention requirements.
• Diagnosed manufacturing and product issues using structured root cause analysis, implementing corrective actions that reduced recurring defects by 20% and improved overall process stability across multiple production lines.
• Led cross-functional coordination with product line managers to release variant designs, presenting weekly metrics, cost estimates, and BOM improvements that improved manufacturing efficiency and reduced unit cost by 12%.

Core Skills:

• Test Automation
• Data Acquisition
• Failure Analysis
• Electronics Debugging
• Process Optimization
• Design For Test

• Executed bring-up and troubleshooting of components, boards, and systems, isolating faults and restoring functionality across 50+ units monthly, improving repair turnaround time by 28%.
• Performed detailed failure analysis and partnered with R&D and operations teams to resolve systemic issues, reducing repeat failures by 21% through structured root cause and corrective action implementation.
• Developed and delivered Theory of Operation and troubleshooting guides to manufacturing, improving technician diagnostic accuracy by 35% and reducing escalation rates across production support activities.
• Aligned characterization, DVT, and HALT testing with cross-functional teams, ensuring comprehensive validation coverage and accelerating product qualification timelines by 20% across multiple development programs.
• Authored manufacturing and characterization test plans and scripts, balancing data coverage and cost efficiency, reducing test time by 18% while maintaining robust parametric validation and yield targets.
• Analyzed parametric datasets and defined test limits with R&D and marketing, establishing specifications, improving margin control, and ensuring compliance through structured data archiving and DFx-driven design alignment.

Core Skills:

• Failure Analysis
• Test Development
• Data Analysis
• HALT Testing
• Design For Test
• Electronics Debugging

• Engineered robust product self-test architectures and built-in test capabilities, improving fault detection coverage by 27% and enabling faster in-line diagnostics across multiple high-volume manufacturing platforms.
• Directed hardware enhancements and firmware command development to strengthen testability, reducing diagnostic gaps and improving test execution reliability by 22% across newly released product lines.
• Evaluated production specifications using statistical data analysis, aligning cross-functional stakeholders and securing partner buy-in while improving process capability indices and reducing variation-related defects by 18%.
• Optimized test efficiency through continuous data reviews with manufacturing teams, identifying bottlenecks and implementing solutions that reduced test cost per unit by 15% and increased throughput consistency.
• Led test convergence initiatives, ensuring compliance with standardized platforms and methodologies, improving system interoperability, and reducing engineering rework effort by 20% across global manufacturing sites.
• Delivered technical training and defined engineering tools with R&D and manufacturing, enabling long-term product support, improving knowledge transfer effectiveness by 30%, and strengthening multi-site operational readiness.

Core Skills:

• Built-In Test
• Statistical Analysis
• Test Optimization
• Firmware Development
• Test Convergence
• Manufacturing Support

• Deployed manufacturing test solutions across contract manufacturers and internal factories, collaborating with hardware and software teams to ensure seamless integration, reducing deployment cycle time by 25%.
• Designed and implemented custom test fixtures and setups for LiDAR systems, improving test repeatability and reducing measurement variance by 20% across high-volume production environments.
• Executed hands-on electrical testing and troubleshooting from component to system level, resolving integration issues and increasing functional yield by 18% through systematic diagnostic methodologies.
• Performed functional analysis of LiDAR units to address manufacturing challenges, identifying root causes and improving product performance consistency across multiple production batches by 22%.
• Established factory test lines, including networking, data collection, and reporting infrastructure, enhancing real-time visibility and reducing data latency by 30% for operational decision-making.
• Managed end-to-end manufacturing test plans while optimizing processes, delivering continuous improvements that reduced test cycle time by 15% and improved overall production efficiency metrics.

Core Skills:

• Test Deployment
• Fixture Design
• LiDAR Testing
• Electrical Troubleshooting
• Data Systems
• Process Optimization

• Collaborated with hardware and test engineering teams to develop test plans and fixtures for new products, closing coverage gaps and improving first-pass yield by 19% across production programs.
• Devised strategies to enhance test throughput and robustness, reducing fixture development time by 23% and lowering overall test cost through streamlined processes and design standardization.
• Reviewed and implemented production line safety improvements, ensuring compliance with operational standards while reducing incident risks and unplanned downtime by 17% across manufacturing environments.
• Established and maintained test networks and production databases for contract manufacturers, improving data integrity and accessibility while reducing system-related disruptions by 21% during high-volume operations.
• Supported automated test frameworks using Python and scripting, enhancing test coverage and reducing manual intervention by 26% while accelerating validation cycles for multiple product lines.
• Developed test software and provided ongoing manufacturing support, resolving technical issues, improving debug efficiency by 24%, and enabling faster turnaround for RMA and rework processes.

Core Skills:

• Test Automation
• Python Scripting
• Fixture Design
• Network Systems
• Failure Analysis
• Manufacturing Support

• Evaluated ODM test plans and strategies for x86 and AMD server platforms, ensuring full system integration coverage and improving component-level test completeness by 24% across production programs.
• Developed and debugged automated test solutions for server functional validation, implementing code enhancements that increased throughput by 28% and reduced test execution bottlenecks in high-volume environments.
• Defined comprehensive test strategies, including flow design, capacity modeling, and equipment planning, improving resource utilization efficiency by 20% while ensuring scalable production readiness.
• Built automated test infrastructure with integrated genealogy tracking, test logs, and database systems, enhancing traceability and reducing data retrieval time by 35% across manufacturing operations.
• Engineered diagnostic test solutions enabling contract manufacturers to perform rapid failure analysis, reducing mean time to resolution by 27% and improving first-time fix rates.
• Drove continuous test optimization through data-driven yield monitoring and root cause analysis, reducing test time by 18% while ensuring on-time delivery and cost-effective manufacturing solutions.

Core Skills:

• Test Automation
• Server Validation
• Data Infrastructure
• Root Cause Analysis
• Yield Optimization
• Test Strategy

• Collaborated with product design teams to define testability features and production test plans, achieving over 95% test coverage and preventing quality escapes across multiple product launches.
• Specified requirements for test systems and fixtures, aligning suppliers to technical standards and improving fixture reliability by 22% while ensuring seamless integration into manufacturing environments.
• Developed and integrated test cases with defined parameters and acceptance limits, increasing defect detection accuracy by 19% and strengthening validation across product-specific test sequences.
• Engineered and debugged test hardware and software solutions, resolving integration issues and improving system stability, reducing test-related failures by 21% in production.
• Introduced and optimized test processes, monitored yield performance, and implemented corrective actions that improved functional yield by 17% while lowering overall test costs.
• Applied statistical analysis, including process capability and measurement system evaluation, validating test effectiveness, and producing detailed technical documentation to support compliance, traceability, and continuous improvement initiatives.

Core Skills:

• Test Development
• Statistical Analysis
• Hardware Integration
• Process Optimization
• Yield Improvement
• Technical Documentation

• Led New Product Introduction activities, defining test strategies and processes that accelerated production readiness timelines by 23% while ensuring alignment between design, manufacturing, and quality requirements.
• Enhanced electrical designs through schematic and PCB updates, improving testability and reducing hardware-related defects by 18% across multiple product iterations.
• Designed and deployed test fixtures and automated systems, increasing test throughput by 27% while standardizing validation processes for scalable manufacturing operations.
• Developed and optimized test processes with integrated automation, reducing cycle time by 20% and improving consistency in high-volume production environments.
• Diagnosed hardware issues to component level, implementing corrective actions that reduced failure rates by 22% and improved overall product reliability.
• Established technical documentation and trained technicians, while reporting production metrics that improved efficiency and quality performance visibility, enabling continuous improvement initiatives across manufacturing lines.

Core Skills:

• Test Automation
• Fixture Design
• PCB Design
• Failure Analysis
• Process Optimization
• NPI Engineering

• Executed assigned testing workflows in compliance with FFI standard processes and safety guidelines, ensuring consistent adherence to procedures and reducing operational deviations by 15% across shop floor activities.
• Performed pre-testing and verification activities for new products, accurately measuring parameters such as pressure, temperature, and electrical signals, improving test data reliability and reducing measurement errors by 18%.
• Assisted Factory Acceptance Testing by conducting process checks and validating system readiness, contributing to the successful qualification of multiple units with zero critical test failures during acceptance stages.
• Configured test apparatus, completed pre-start validations, and ensured proper setup of test environments, reducing setup-related delays by 20% and improving overall testing efficiency.
• Supported failure diagnosis and root cause analysis for product and equipment issues, helping reduce recurring failures by 17% and improving test equipment uptime across operations.
• Maintained test equipment and enforced health and safety compliance on the shop floor, contributing to improved equipment efficiency by 16% and ensuring zero safety violations during assigned operations.

Core Skills:

• Test Execution
• Data Measurement
• Failure Analysis
• Equipment Maintenance
• FAT Testing
• Safety Compliance

• Designed and implemented manufacturing test processes for production and customer returns, improving cycle time by 21% while enhancing defect detection and overall product quality performance.
• Led manufacturing efforts within New Product Introduction programs, delivering DFM, DFT, and FMEA analyses, capacity planning, and quality strategies that improved launch efficiency by 25%.
• Optimized production processes through targeted improvements, reducing operational costs by 18% and enhancing operator safety and ergonomics across multiple manufacturing lines.
• Collaborated with third-party suppliers to resolve test and product issues, improving resolution turnaround time by 24% and strengthening external partner performance and accountability.
• Managed concurrent process improvement initiatives, driving productivity gains of 20% and increasing customer satisfaction through measurable enhancements in yield and on-time delivery.
• Analyzed manufacturing data and deployed new equipment and procedures, improving yield by 19% while ensuring compliance, scalability, and effective workforce training across production environments.

Core Skills:

• DFM DFT
• Process Optimization
• FMEA Analysis
• Yield Improvement
• Equipment Engineering
• Data Analysis

• Developed scalable manufacturing test systems for volume production, reducing defect escape rates by 26% while balancing test coverage and minimizing overall test cost across diverse product lines.
• Optimized test strategies for new products, aligning coverage and cost trade-offs, achieving 22% reduction in test time while maintaining stringent quality and reliability standards.
• Led manufacturing test projects end-to-end, managing schedules, equipment deployment, and process implementation, improving on-time delivery of test readiness by 24% across NPI programs.
• Collaborated with R&D and global manufacturing teams to enhance test development, ensuring programmability and flexibility, increasing cross-site deployment efficiency by 20%.
• Analyzed yield data and drove continuous improvements in test systems and product design, improving yield performance by 18% and reducing variability across manufacturing operations.
• Established validation frameworks and managed compliance documentation, enabling consistent global test deployment while supporting engineering changes, new feature rollouts, and supply chain integration.

Core Skills:

• Test Systems
• Yield Analysis
• Test Optimization
• NPI Engineering
• Validation Planning
• BOM Management

• Delivered manufacturing test engineering support for aerospace electrical hardware, including RTDs, pressure transducers, and control systems, improving test reliability by 23% across first and second stage engine programs.
• Executed benchtop acceptance testing for instrumentation and active components, validating functionality and reducing component rejection rates by 19% through precise calibration and verification procedures.
• Reviewed wiring schematics and assembly CAD models for manufacturability, identifying design gaps and improving integration efficiency by 17% across complex upper-level assemblies.
• Collaborated with design and manufacturing engineers to develop installation procedures for harnessing and instrumentation, reducing assembly errors by 21% and improving build consistency.
• Conducted integrated testing and supported engine-level verification and anomaly investigations, resolving critical issues and improving system validation success rates by 18%.
• Supported component qualification and design release activities while contributing to continuous learning and knowledge sharing, strengthening team capability, and ensuring compliance with aerospace testing standards.

Core Skills:

• Aerospace Testing
• Instrumentation Systems
• Electrical Validation
• Failure Analysis
• Test Procedures
• CAD Review

• Defined end-to-end manufacturing test strategies across the supply chain, improving product quality and reducing defect escape rates by 24% through targeted validation of high-risk assembly processes.
• Served as technical liaison between R&D, operations, quality, and suppliers, aligning cross-functional priorities and accelerating issue resolution turnaround time by 22% across production programs.
• Owned manufacturing test stations from concept to mass production, deploying scalable solutions that improved test coverage by 20% and ensured consistent product verification across multiple product lines.
• Developed and executed test methods, fixtures, and automated programs, increasing inspection accuracy by 18% while reducing manual intervention and improving operational efficiency.
• Diagnosed in-process and returned product failures using structured root cause analysis, implementing corrective actions that reduced recurring defects by 21% and improved overall reliability.
• Analyzed production test data and implemented equipment maintenance and upgrade strategies, enhancing system uptime by 19% while continuously improving test processes and manufacturing performance.

Core Skills:

• Test Strategy
• Fixture Design
• Data Analysis
• Failure Analysis
• Test Automation
• Process Improvement

• Managed installation and bring-up of advanced manufacturing equipment, executing integration plans that reduced commissioning time by 26% while ensuring alignment with assembly line production requirements.
• Coordinated cross-functional requirements for power, air, IT, and networking, enabling seamless equipment deployment and improving infrastructure readiness across multiple production sites.
• Integrated equipment with MES and shop floor systems using OPC and Ignition, enhancing real-time data visibility and improving process monitoring accuracy by 31%.
• Maintained data pipelines and server infrastructure using Linux, Python, AWS, and SQL, increasing system reliability by 28% and supporting scalable data acquisition and reporting capabilities.
• Diagnosed production and equipment issues, executing root cause analysis and corrective actions that reduced downtime by 22% and improved overall manufacturing efficiency.
• Optimized spare parts strategy and supported shop floor operations, improving equipment uptime by 19% while enabling accurate SOP development and ensuring compliance with safety inspections and training programs.

Core Skills:

• MES Integration
• Data Engineering
• OPC Systems
• Cloud Infrastructure
• Root Cause Analysis
• Equipment Engineering

• Developed and maintained Factory Acceptance Testing processes for fuel cell systems, improving process capability by 21% through structured DOE, GRR studies, and robust verification methodologies.
• Created and executed test plans while operating and enhancing test stations, increasing validation efficiency by 19% and ensuring consistent production readiness for complex electrochemical systems.
• Collaborated with product design teams throughout development cycles, influencing design decisions and improving manufacturability and testability across prototype builds and production releases.
• Led cross-functional problem-solving and change management initiatives, reducing process deviations by 18% while ensuring compliance with safety, quality, and productivity requirements.
• Diagnosed system and component failures during production testing, implementing corrective actions that reduced defect recurrence by 20% and improved overall system reliability.
• Documented and communicated production metrics, technical findings, and process updates, enabling data-driven decisions and driving continuous improvement across manufacturing operations.

Core Skills:

• FAT Testing
• Design Of Experiments
• Process Validation
• Failure Analysis
• Change Management
• Test Systems

• Supported full lifecycle manufacturing test systems for RF and radar products, driving development through scaling and refinement, improving system robustness by 23% across production deployments.
• Collaborated with design engineers to build automated test systems for PCBA and RF products, increasing test coverage by 21% while ensuring scalability and long-term maintainability.
• Developed and aligned test processes with product requirements, enabling efficient validation workflows and reducing test cycle time by 18% across multiple manufacturing programs.
• Executed validation plans and authored operating procedures, ensuring compliance with ISO9000 and AS9100 standards while improving documentation accuracy and audit readiness by 25%.
• Integrated in-circuit and functional testing with contract manufacturers, optimizing test strategies to improve ROI and reducing test cost per unit by 17%.
• Championed Design-for-Test initiatives and facilitated cross-functional integration, improving new product introduction success rates by 20% and ensuring seamless transition from design to production.

Core Skills:

• RF Testing
• Test Automation
• DFT Engineering
• PCBA Testing
• Validation Planning
• Process Compliance

• Developed manufacturing test strategies for hardware products, building test plans and prototype setups for next-generation technologies, improving validation readiness by 22% during early development phases.
• Collaborated with embedded software teams to integrate test access and APIs, enhancing test coverage and enabling automated diagnostics that reduced manual intervention by 19%.
• Designed and maintained hardware and software for production test stations, improving system reliability by 24% and ensuring consistent performance across NPI and mass production builds.
• Analyzed measurement data from test stations, translating insights into design feedback that improved product performance and reduced field failure rates by 17%.
• Provided on-site support during NPI and production ramp, resolving build issues and accelerating time-to-volume by 21% through rapid troubleshooting and cross-functional coordination.
• Explored emerging technologies and drove continuous improvements beyond test scope, enhancing product quality and manufacturability while strengthening collaboration between engineering and manufacturing teams.

Core Skills:

• Test Development
• Embedded Systems
• Data Analysis
• NPI Support
• Hardware Testing
• API Integration

• Conducted inspections and testing in compliance with approved procedures, ensuring adherence to regulatory and DCMA standards while improving first-pass acceptance rates by 20% across production programs.
• Operated and maintained production test equipment and software systems, ensuring calibration accuracy and reducing equipment-related test failures by 18% in high-reliability manufacturing environments.
• Prepared technical data packages and documentation, securing timely approval of test reports and improving audit readiness and traceability across regulated manufacturing operations.
• Led troubleshooting of test and inspection anomalies, generating non-conformance reports and driving root cause corrective actions that reduced recurring defects by 22%.
• Collaborated with engineering teams to evaluate and qualify new technologies, processes, and tooling, improving manufacturing efficiency by 19% and supporting continuous process innovation.
• Trained production personnel and implemented Lean and Six Sigma initiatives, reducing waste by 17% while ensuring compliance with government regulations and enhancing overall operational performance.

Core Skills:

• Quality Testing
• Root Cause Analysis
• Lean Manufacturing
• Test Equipment
• Technical Documentation
• Process Improvement

• Ensured electronic assemblies and finished products met functional specifications and quality standards, improving first-pass yield by 21% through rigorous validation and test process control.
• Supported manufacturing product lines through technology transfer, failure analysis, and process optimization, increasing yield by 18% while enhancing test fixture reliability and procedural consistency.
• Led end-to-end manufacturing test system lifecycle from requirements through integration, improving deployment efficiency by 24% and ensuring scalable support for new and existing products.
• Applied DFT and DFM principles to develop test hardware and software solutions, improving test coverage by 20% and reducing design-related test limitations across product lines.
• Collaborated with internal and external partners to define test specifications, strategies, and acceptance criteria, improving measurement accuracy and reducing variability by 17% in production testing.
• Developed automated test systems and provided global NPI support, accelerating ramp-up timelines by 22% while enabling real-time performance feedback and strengthening manufacturing scalability.

Core Skills:

• Test Systems
• DFT DFM
• Test Automation
• Failure Analysis
• NPI Support
• Process Optimization

• Coordinated with internal test engineering and external OSAT partners to qualify ATE, probers, and handlers, improving production readiness and reducing qualification cycle time by 23%.
• Served as liaison between supply chain, test engineering, and remote facilities, aligning NPI activities and resolving integration issues to improve test yield by 19%.
• Troubleshot manufacturing test failures and implemented root cause corrective actions, reducing recurring defects by 21% and improving overall product reliability in high-volume environments.
• Developed and executed RF test programs and scripts, enhancing automation and increasing test coverage by 18% for wireless product validation on manufacturing test stations.
• Analyzed factory test data and optimized test strategies, improving yield performance by 17% while reducing unnecessary test steps and increasing operational efficiency.
• Utilized RF test equipment, including spectrum analyzers and power meters, to diagnose failures, driving continuous improvements that enhanced defect detection and reduced field returns by 16%.

Core Skills:

• RF Testing
• ATE Systems
• Test Automation
• Data Analysis
• Failure Analysis
• Yield Optimization

• Drove robust manufacturing test process implementation under aggressive launch timelines, enabling successful product ramp while reducing time-to-production by 24% across wireless product programs.
• Architected software-driven test strategies to optimize test density and cost, reducing overall test cost by 18% while maintaining high coverage and production efficiency.
• Led transition of new products from design to contract manufacturing, ensuring scalable test architectures and improving deployment consistency by 21% across global manufacturing sites.
• Supported and continuously improved deployed test processes, implementing closed-loop corrective actions that reduced defect recurrence by 20% and strengthened accountability for test outcomes.
• Developed and executed RF test programs using scripting on manufacturing stations, increasing automation and improving test coverage by 17% for wireless device validation.
• Analyzed factory data and diagnosed failures using RF equipment, driving targeted optimizations that improved yield by 16% and reduced field return rates across production lines.

Core Skills:

• RF Testing
• Test Automation
• Data Analysis
• Yield Optimization
• Test Strategy
• Failure Analysis