• Ensure that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times
• Identify new or existing capital projects, which may vary in size and include both repairs and/or new construction at the facility
• Work with senior leadership on changes in the scope of capital projects to ensure the project will be completed on time and within budget
• Assist with the estimation of costs and procurement of labor and materials required for timely completion of the project
• Participate in contract administration with third-party vendors required for construction and equipment purchases
• Interface with regulatory agencies and other key stakeholders
• Perform quality inspections of work performed by plant personnel and subcontractors and maintain checklist(s) to ensure QA/QC
• Explore and research new or existing technologies related to the Radiology business
• Design circuitry for prototypes or test fixtures and test electronic circuitry
• Draft formal or development test plans, protocols, and test cases
• Work with technicians and engineers to conduct dry run and or risk reduction testing and capture issues as well as data
• Analyze testing results and write reports based on testing conducted
• Develop and analyze models to create solutions or improvements to current issues within products and designs
• Coordinate with stakeholders and customers in performing tasks
• Participate in technical reviews and cross-functional documentation reviews
• Present complex technical information to an audience of varied expertise/levels for guidance, education, and decision-making.

Skills: Safety Compliance, Project Management, Cost Estimation, Contract Administration, Stakeholder Engagement, Quality Assurance, Technology Research, Data Analysis

• Develop and analyze field and engineering data to assist in Service projects and improve product support
• Assist in investigating field issues to resolve immediate equipment problems and analyze root cause to help drive product design improvement and service routines/ process changes
• Review electrical/plumbing schematics and equipment drawings/specifications to help with the development of support tools, installation and service procedures and parts sourcing
• Assist in providing technical and parts support to technicians in the field via a phone and possibly on-site
• Prepare specifications and develop bid scopes for contractors
• Develop estimates and source equipment for projects
• Develop design solutions to problems in accordance with engineering standards pertaining to safety, sanitation, and production impact
• Supervise contractors and maintenance personnel on capital upgrades and projects
• Contribute to team effort by engaging in Continuous Excellence (NCE) activities to drive results
• Lead 3D printing (additive manufacturing) related projects to improve manufacturing and distribution processes
• Support Engineers on various supply chain projects use technical skillsets to conduct analyses of processes. 
• Communicate study results and make recommendations to management.
• Perform development, fabrication, and deployment of prototype systems (including the development of industrial robotics, end-of-arm tooling, programming routines, etc)
• Utilize and maintain prototyping shop space to develop new systems to drive improved manufacturing and distribution center performance.
• Provide support to the engineering team in the design, procurement & support of Microgrid systems.
• Provide support to engineering staff for designing Microgrid systems using CAD software
• Coordinate vendor & design drawing reviews
• Gain an understanding of microgrids.
• Participate in projects, shadows, and learning in microgrid design, material ordering, customer impact, project closeout, project scheduling and permitting.

Skills: Data Analysis, Technical Support, Schematic Review, Specification Development, Project Estimation, Safety Standards Compliance, Continuous Improvement, Prototype Development

• Find areas of opportunity working with the Supervisor and the Engineer of the large and midsize area to achieve a 5% reduction in the base hours of the codes
• Timing operations and balance for codes of large and midsize areas and other areas
• Preparation and presentation of VCP and lean projects
• Support in course presentations in the training area
• Involvement in Continuous Improvement projects for internal processes
• Identify shortcomings in the current dust collection system and develop and execute action items that will improve active dust collection in the Lake City Polyiso facility.
• Observe and create SOPs for the laminating room with an emphasis on scrap foam management.
• Work with Safety Specialist to conduct a plant-wide ergonomics survey with scoring assessment and develop countermeasures for assessment findings.
• Review all procedures developed or updated with production management for approval.
• Document findings and make recommendations with support from Plant Management, Safety and Production leadership.
• Assist with projects related to manufacturing equipment and processes.
• Provide technical support to operations and maintenance personnel to quickly and accurately resolve manufacturing issues.
• Assist with the coordination and management of activities, including costs, timelines and performance agreements relevant to identified projects.
• Gather and analyze data from relevant sources to identify trends and implement changes to improve operating efficiency of the facility, lower costs, and improve safety and quality performance.
• Assist with the evaluation, development/modification of software tools used to design refrigeration systems and select the components needed for them
• Work with the ERP team to incorporate existing and new tools into the software
• Modify and create Bills Of Material for simpler jobs 
• Support Mechanical Product Engineering with basic engineering tasks and drawing changes.

Skills: Process Optimization, Operations Timing, Lean Management, Continuous Improvement, System Enhancement, SOP Development, Ergonomics Assessment, Technical Support

• Work activities include collection and interpretation of engineering data, development of project design basis
• Apply theory and engineering experience in the planning and design
• Development of specifications, and performance of detailed engineering.
• Perform varied office engineering functions in preparing and supervising the preparation of reports, estimates, plans, and specifications.
• Assist with the development of budgets and manpower plans and review performance data.
• Assist with the preparation of bid proposals and proposals for contracts.
• Assist with scheduling, conducting and documenting meetings
• Ensures conformance to applicable engineering codes and standards as well as company policies and procedures
• Interprets customer needs, assesses requirements, and identifies solutions to non-standard requests.
• Uses best practices and knowledge of internal/external business issues to improve products or services in own discipline.
• Conducts field/site visits for investigation or inspection with senior personnel.
• Applies knowledge and skills to a wide range of standard and nonstandard situations
• Works on straightforward tasks using established procedures, all work will be subject to review by others
• Under the supervision and mentorship of Engineering Leadership seek to understand and contribute to Engineering Work Processes, including capital project implementation.
• Understand the Plant's operations and manufacturing SOPs, data collection, and continuous improvement processes.
• Within the different plant areas assigned, analyze and recommend improvement opportunities and/or changes to produce safe, high-quality products at targeted reliability.
• Manage small engineering and/or maintenance projects from the feasibility phase, through budget control and implementation, including vendor/contractor interaction and defining timelines.
• Additional tasks as assigned in identifying areas for improvement and developing/implementing solutions

Skills: Engineering Data Analysis, Project Design and Planning, Specification Development, Engineering Report Preparation, Manpower Planning, Bid Proposal Preparation, Meeting Coordination, Engineering Code Compliance

• Assist with various engineering projects and tasks
• Gain industry experience in a variety of engineering areas
• Participate in department meetings and contribute ideas regularly.
• Liaison with other departments regarding current projects and tasks.
• Identify process improvements and create standard work
• The project to be completed this summer will consist of creating a better layout of the Building 2 plant and implementing a barcoding system.
• Supporting a startup and commissioning new production lines to include time studies, completing a DOE, and evaluating data.
• Partaking in the Kemin Summer Internship Program events and training. 
• Prepare and give a final presentation to Kemin Industries leadership.

Skills: Engineering Project Assistance, Cross-Departmental Collaboration, Process Improvement Identification, Plant Layout Design, Barcode System Implementation, Production Line Commissioning, Data Evaluation, Presentation Skills

• Assist with designing machine upgrades.
• Complete designs and layouts for equipment and structures.
• Work with maintenance to troubleshoot equipment issues.
• Apply engineering principles to design and material selection.
• Participate in Continuous Improvement projects.
• Assist in other projects and function as a resource for other team members.
• Support existing engineering projects.
• Document and improve processes.
• Meet the essential job requirements, with or without reasonable accommodation, as outlined in the job description.
• Follow Environmental, Quality, and Safety Management System procedures and requirements.
• Prepare test plans and conduct experiments utilizing necessary analytical /lab equipment to acquire results.
• Analyze test data and prepare reports to document findings and recommendations.
• Participates in defining engineering approaches.
• Collaborate with the Construction Engineer during the implementation of energy performance measures and help supervise the worksite.
• Perform preliminary calculations to support the engineers.

Skills: Machine Design, Equipment Troubleshooting, Engineering Principles Application, Continuous Improvement Participation, Project Support, Process Documentation, Test Plan Preparation and Execution, Data Analysis and Reporting

• Assist in product development projects including design, development, test prototypes, manufacture and implement
• Provide Engineering and Technical knowledge backed by applicable calculations to ensure that designs are safe, meet the proper fit, form and function of specifications and adhere to industry standards, such as UL, CUL, CE
• Ensure that specifications, bills of material, drawings, assembly drawings and component specifications meet IKA standards and best engineering practices
• Assist purchasing in sourcing designed products and components
• Create drawings, and 3D models and ensure that the designs are manufacture-able and are free from fit and tolerance errors
• Ensure that the bill of materials is accurate, complete, and in order when transferred to the manufacturing
• Prepare product documentation
• Responsible for maintaining and communicating to management an accurate and up-to-date project schedule
• Create, check and analyze ECNs to ensure proper fit, function, and form
• Provides reports as needed to management 
• Write procedures and fabricate test articles
• Design basic electronics with off-the-shelf electronics 
• Develop and deploy robot prototypes and control software using Arduino, ROS, etc
• Evaluate designs, modify and enhance functionality
• Inventory management and procurement
• Support engineering qualification and layout projects.

Skills: Product Development, Technical Analysis, 3D Modeling, Bill of Material Management, Engineering Standards Compliance, Project Scheduling, Engineering Change Notice Management, Technical Reporting

• Work closely with a full-time engineer to learn the discipline
• Assist with day-to-day engineering activities
• Implement workflow improvements and work on other special projects
• Gain valuable hands-on experience
• Work on multiple assignments, work independently, communicate and interface effectively while working in a team environment
• Assist engineers and CAD Designers with completing project design documentation, calculations, research, CAD drawings and/or reports
• Assist engineers in developing standard operational department procedures and drawing standards and details
• Assist project engineers and CAD Designers in preparing project cost estimates, reports and design documents
• Assist engineers with calculations and CAD design
• Assist engineers in the preparation of final reports, department procedures, techniques and standards
• Participate in meetings, as required, with the client, subcontractors, and internal resources to resolve issues and ensure smooth project implementation
• Ensure compliance with best practices and health and safety on construction sites.
• Take readings and measurements of HVAC systems.
• Assess compliance with design, drawings and specifications, and applicable codes and regulation

Skills: Engineering Assistance, Workflow Optimization, Project Management, CAD Design, Technical Documentation, Cost Estimation, Interpersonal Communication, Health and Safety Compliance

• Assist Sr. Plant Engineer and others with capital project development
• Provide accurate specification information for internal requests as needed for development for quoting, audits, packaging improvement, and savings initiatives
• Drive assigned projects to completion within the agreed-upon project schedules
• Communicate project results and initiatives to internal stakeholders in an efficient and effective way
• Build and develop strong relationships and work effectively with peers with internal and external customers
• Providing technical and economic analysis to help establish a development strategy for resource plays to include well planning, spacing, recovery, etc.
• Designing and implementing drilling and work-over programs to develop producing properties at a maximum economic rate
• Overseeing the design and execution of completions for wells drilled including well planning, casing design, material and equipment selection, evaluation, stimulation design, quality assurance, and post-job evaluation.
• Evaluating good performance and developing new techniques and approaches to enhance production rates and reduce operating costs
• Designing and maintaining gathering and processing facilities including pipelines, compressor stations, and gas processing and treating facilities to ensure that gas flows from the wellhead to the sale point.
• Help solve sewing design issues by utilizing the IDDOV process to determine the best method for quality sewn covers. 
• Complete A3s which will be presented in weekly and executive design reviews for this investigation.
• Help gather data, evaluate, and write technical documentation for engineering signoff.
• Exposure to the product development process and interaction with Subject Matter Technical Experts (SMTEs) throughout the assignment.
• Exposure to Design For Assembly and Manufacturing (DFAM) principles in trim cover construction. 

Skills: Project Management, Technical Documentation, Economic Analysis, Stakeholder Communication, Drilling Program Design, Completion Engineering, Gathering System Design, Relationship Building

• Hands-on experience in multiple engineering applications to include Mechanical, Electrical, Refrigeration Systems, and Heat Transfer
• Data analysis, test management, and writing formal test reports
• Presentation of test data & test reports to colleagues
• Hands-on testing within a state-of-the-art lab on multiple revolutionary projects
• Work side-by-side with subject-matter experts and be involved on project teams
• Exposure to Bill of Material within a manufacturing environment, including change management
• Product Lifecycle Management and data sharing amongst business systems
• Data Analysis to achieve competitive advantage through better decisions in uncertain business environments
• Project Management Principles and cross-functional collaboration
• Conduct research to identify and qualify substitutes for existing parts
• Help define and document existing and new processes
• Perform basic support for the Custom Product Engineering Team
• Work with the testing department to ensure product performance
• Assist with Technical Report writing
• Assist with developing Customer Facing Presentations for new product launches
• Assist with training development on a variety of topics

Skills: Mechanical Engineering, Electrical Engineering, Data Analysis, Project Management, Technical Report Writing, Test Management, Cross-Functional Collaboration, Bill of Material Management

• Experience developing Web Applications using ReactJS, Redux, ES6 Syntax, and Bootstrap.
• Good understanding of front-end architectures such as MVC.
• Experience in Frontend integration with RESTful Web Services.
• Solid understanding of developing rich applications using Javascript and HTML5/CSS3.
• Expertise in building UI components in a reusable manner.
• Knowledge of source control tools 
• Experience in working with any Map Library like Google Maps or Mapbox, WebGL
• Good practical knowledge of the Office package.
• Good relationship-building skills
• Can work to deadlines and under pressure
• High level is written and verbal communication skills
• Working knowledge of ERP systems
• Strong organizational skills and ability to manage multiple tasks 

Qualifications: BS in Aerospace Engineering with 3 Years of Experience

• Excellent verbal and written communication skills
• Excellent organization and time management skills
• Excellent customer service skills
• Must be self-motivated and able to work independently in a fast-paced, multi-tasking environment
• Prior project management experience
• Ability to define problems, collect data, establish facts, and draw valid conclusions
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables
• Ability to make technical decisions and engineering judgments independently within established parameters
• Experience in engineering or academic coursework in drinking water treatment, drinking water distribution systems, drinking water quality, or source water protection
• Experience working with Safe Drinking Water Act requirements and Drinking Water System design technical standards
• Experience with Microsoft Office software including Microsoft Word and Microsoft Excel
• Experience working collaboratively with others in a workplace or in an academic setting
• Experience using organizational skills to monitor and track multiple ongoing assignments

Qualifications: BS in Chemical Engineering with 5 Years of Experience

• Good verbal and written communication skills
• Interest in DevOps and Site Reliability Engineering and Linux knowledge
• Understanding of computer science fundamentals 
• Understanding of product development lifecycle 
• Basic understanding of microservices and restful services
• Basic understanding of common network protocols such as TCP/IP, HTTP
• Basic understanding of security stack and solutions
• Experience in SQL and DB systems: GBQ, RDS, Cloudsql, DynamoDB, InfluxDB, Microservices architecture, pub-sub based messaging systems, and Container technologies
• Working Knowledge of CICD pipelines
• Good programming skills (Python), Javascript
• Experience with Cloud Networking
• Experience with 3-D modeling using SolidWorks or similar.
• Experience in a laboratory environment using data collection equipment
• Previous research or internship experience in biomechanics or medical device fields 
• Experience with programming for engineering and statistical analysis

Qualifications: BS in Civil Engineering with 4 Years of Experience

• Basic SolidWorks and Drafting skills
• Proven Leadership in and out of the classroom
• An active participant on a team or in a collaborative environment
• Knowledge/Skills of Microsoft Office Suite
• Strong Project Management/Organizational Skills.
• Willing and able to operate construction and Agricultural equipment as needed to support new product development.
• Fluent level of English and Spanish
• Basic operations knowledge and understanding of a production plant
• Knowledge of data treatment, statistical tools, and chemometrics
• Knowledge of analytical tools applied to the food industry
• Able to build partnerships and work collaboratively with others to meet shared objectives
• Demonstrated effective multitasking and project management skills
• Proficiency in Excel, and Word and familiarity/capability with most other Microsoft Office applications
• Knowledgeable in general business or human resource process planning or work process organizing activities, gathering data, following up on results, etc.

Qualifications: BS in Electrical Engineering with 2 Years of Experience

• Strong verbal and written communication skills in English
• Familiarity with statistical data analysis techniques
• Demonstrated excellent problem-solving skills
• Familiarity with semiconductor packaging and testing technologies, process and equipment 
• Proven, proficient user of MS Office (specifically Excel, PowerPoint, and Word)
• Experience working in a lab environment 
• Strong verbal and written communication skills
• Demonstrated leadership qualities and problem-solving skills
• Positive attitude, team-oriented, adaptive to change, and collaborative
• Experience with Autocad and 3D CAD such as Solidworks.
• Well-organized and disciplined with data collection.
• Familiarity with IE principles and tools such as work sampling, etc.

Qualifications: BS in Mechanical Engineering with 3 Years of Experience

• Strong computer skills.
• Ability to analyze, problem-solve, and implement solutions.
• Ability to generate detailed concept proposals and development plans.
• Innovation skills to generate new ideas or alternative solutions.
• Ability to analyze problems, identify root causes, and provide efficient solutions
• Strong oral and written communication skills
• Knowledge of Plastic molding 
• Knowledge of GMP and process/workflow optimization and standardization.
• Knowledge of Microsoft Office software as well as any programming language
• Knowledge of PCBA, basic electrical/electronic troubleshooting and good analytical skills
• Responsible, self-motivated, able to multi-task and work under tight timelines.
• Able to work independently and loves working in a team.
• Knowledge of AutoCad and MS Project Management software

Qualifications: BS in Aerospace Engineering with 2 Years of Experience

• Proficient in the use of Microsoft Office applications
• Intermediate to Advanced Microsoft Excel skills/knowledge to include the practical use of formulas, charts, vLookups and Pivot Tables 
• Ability to interact politely and professionally with customers and/or coworkers
• Strong organization skills
• Ability to handle multiple priorities
• Effective verbal and written communication skills
• Basic knowledge of Mechanical & Electronics Design.
• Experience in CAD software tool 
• Basic experience in Prototyping / 3D printing.
• Basic Programming in C#, C++, and Python.
• Ability to conduct independent research and development
• Strong interpersonal, team, and leadership skills

Qualifications: BS in Chemical Engineering with 4 Years of Experience

• Experience in software development, using Python
• Experience with Code Version Control (GIT)
• Experience working with Agile scrum or kanban methodology to deliver high-quality, high-value software
• Experience with Python Pandas
• Experience and understanding of Docker or Vagrant 
• Familiarity with Tableau and R
• Proficiency with C# and ASP.Net
• Understanding of object-oriented design and analysis (OOD and OOA)
• Experience with Microsoft Visual Studio, Entity Framework, SQL Server, and MongoDB
• Experience with software development principles and processes
• Familiarity with web-based tools and architecture
• Excellent verbal, writing, and presentation communication skills

Qualifications: BS in Civil Engineering with 3 Years of Experience

• Passionate collaborator with a focus on what is best for the team
• Enthusiastic and capable technologist, able to demonstrate a broad technical knowledge
• Foundational/basic PHP development skills
• Understanding of agile development concepts
• Able to work with relational databases such as MySQL at a basic level (eg query, update and delete data)
• Excellent oral and written communication skills
• A clear focus on the customer, both internal and external
• Basic Linux skills via the command line
• An interest in modern software development, including Docker and Continuous Delivery
• Active participation in the development community
• Experience with PHP frameworks such as Laravel, Lumen or Zend
• Experience with front-end frameworks such as VueJS or React
• Ability to lead and work as part of multidisciplinary teams in a global environment

Qualifications: BS in Electrical Engineering with 1 Year of Experience

• Basic knowledge of industry standards and best practices
• Previous related work experience 
• Experience with AutoCAD and/or other related software 
• General working knowledge of 6S principles
• Strong organizational and planning skills.
• Strong technical skills with great attention to detail.
• Must demonstrate a willingness to learn and develop.
• Must be proficient with Microsoft Office Suite applications.
• Experience in a pharmaceutical, biopharmaceutical, or related industry 
• Strong C/C++ programming experience
• Strong scripting skills (e.g., shell/python)
• Understanding of computer architectures and real-time computing
• Strong communication skills, verbal and written
• Strong analytical skills

Qualifications: BS in Mechanical Engineering with 2 Years of Experience