Electrical and Instrumentation Engineer Skills, Experience, and Job Requirements

ELECTRICAL AND INSTRUMENTATION ENGINEER SKILLS, EXPERIENCE, AND JOB REQUIREMENTS

Updated: Jan 06, 2025 - The Electrical and Instrumentation Engineer coordinates seamlessly with diverse technical and managerial teams, excelling in customer relations and functioning independently with minimal oversight. Demonstrates deep expertise in control and communication systems within the oil and gas sector, proficient in reading and developing control loop drawings and electrical schematics for hazardous areas. Manages multiple projects with ease, prioritizes tasks effectively, and maintains a strong focus on safety, accuracy, and efficient problem-solving.

Essential Hard and Soft Skills for a Standout Electrical and Instrumentation Engineer Resume

Circuit Design
PLC Programming
Instrument Calibration
SCADA Systems
Electrical Troubleshooting
Control System Design
Schematic Interpretation
Automation
Power Distribution
Data Acquisition

Problem Solving
Critical Thinking
Team Collaboration
Effective Communication
Adaptability
Time Management
Project Management
Attention to Detail
Innovation
Stress Management

Summary of Electrical and Instrumentation Engineer Knowledge and Qualifications on Resume

1. BS in Electrical Engineering with 5 Years of Experience

Experience with PLC systems and panel wiring
Proven data analysis skills combined with strong presentation skills
Experience in using lean management and root cause analysis techniques
Ability to successfully lead projects through the full project cycle
Strong communication skills with the ability to constructively challenge
Ability to react quickly under pressure
A passion for coaching and guiding others to deliver improved results
Strong HandS ethos to work

2. BS in Instrumentation Engineering with 3 Years of Experience

Experience in IandE design for gas s and/or liquid pipelines, petrochemical plants, or petroleum terminal facilities.
Must be able to coordinate effectively with a wide range of technical, analytical and managerial personnel, function with minimal direction, and excel at customer relations.
Strong knowledge and understanding of control and communications systems, particularly in the oil and gas systems.
Ability to read, understand and develop control loop drawings, PandIDs, and electrical schematics.
Exhibit excellent written and oral communication skills.
Experience in the design of electrical installations meeting requirements for Class 1 Group C, D hazardous areas.
Experienced in handling multiple projects simultaneously and effectively prioritizing tasks.
Have a broad knowledge of industry standards
Excellent communication skills, demonstrated proficiency in accuracy and attention to detail, good time management capability, strong values on safety awareness and execution
Familiar with problem-solving skills and ability to organize and run effective meetings
Demonstrated ability to identify and analyze potential manufacturing problems and initiate appropriate solutions and awareness of Safety Health and Environmental regulations
Hands on experience in plant electrical and instrumentation equipment maintenance and troubleshooting: Motors, motor control centers, variable frequency drives, soft-starters, etc.

3. BS in Control Systems Engineering with 4 Years of Experience

Experience in an EICA design role, although a newly graduate person will also be considered for the role
Experience in understanding PandID’s
Experience in controls and instrumentation
Experience interfacing with clients would be desirable
Excellent communication skills
Knowledge and experience of general process plant / equipment
Knowledge of PLC programming software
Experience and knowledge of water treatment sector
Ability and experience of being able to work to a dead-lines and to plan tasks around the timescales of others, with excellent time management skills
Without direct supervision to have an ability to proactively find information and answers so that design work is allowed to progress
A passion for delivering excellent customer service
Technical competence and excellent problem solving skills
Excellent knowledge of Google Application Suite and/or Microsoft Office packages (Excel, Word, PowerPoint)

4. BS in Electronics Engineering with 6 Years of Experience

A background in the petrochemical industry and experience in IandE
Knowledge of engineering contracting and project execution is essential
Strong knowledge of electrical standards and practices is key to interaction with vendors, contractors, managers and hourly personnel.
Contractor management and project development skills
TAR execution and management experience
Knowledge of NEC and applicable IEEE specifications
Knowledge of OSHA electrical safety requirements
Knowledge of electrical API and ANSI standards
High level of troubleshooting and problem solving skills
MS software including spreadsheets and databases (initiate and maintain)
Knowledge of maintenance practices, both predictive and preventive
Read and interpret complex schematics, wiring diagrams, blueprints and microfiche
Knowledge of instrumentation, motors, motor controls, control valves, MOV’s, PLC’s, ladder logic, and discrete relaying
Knowledge of management of change procedures

5. BS in Mechatronics Engineering with 2 Years of Experience

Flexible, adaptable and open minded
Proactive self-starter who is driven to succeed with a positive attitude
Problem solver who is curious in approach with the capacity to grow and develop
Empathetic toward the needs of others
Demonstrates integrity, honesty and humility
Confidence to ask questions, seek help, make decisions and challenge the norm
Ability to communicate well at all levels
A reasonable level of confidence when speaking in an open forum
Strong IT skills
Capacity to learn and proactively seek and provide feedback
Good understanding of the benefits of respecting and appreciating what makes people different
Good understanding of instrumentation and controls engineering principles and practices.

6. BS in Industrial Engineering with 7 Years of Experience

Field experience and strong knowledge of Electrical, Instrumentation, and Control systems
Demonstrable knowledge of troubleshooting issues within the system
Understanding of electrical power distribution and protection for low and medium voltages (switchgear, transformers, motor control centers, lighting, automation cabinets)
Basic understanding of automation (PLC) applications
Ability to modify/edit Electrical deliverables in Autocad (2D)
Ability to learn concepts and technical details of complex systems
Ability to work independently, accepting ownership of assigned responsibilities
Able to work well in a high pressure environment with continuous changes
Knowledge of SAP, Microsoft Word, PowerPoint and Excel
Ability to add something unique and positive to team

7. BS in Electrical Engineering with 5 Years of Experience

Experience in plants EandI design or maintenance preferably in chemical or manufacturing plants.
Experience in PLC programming
Strong SHEQ knowledge and ability to enforce SHEQ requirements.
Leadership skills with the ability to interact effectively with all levels, and exercise independent judgment.
Strong analytical and troubleshooting skills as well as the ability to identify and solve problems quickly.
Well-versed in EandI standards and regulations.
Able to understand PandIDs, single Line, and Schematic Diagrams
Able to independently work out an EandI calculation and quotation in consultation with sales manager and/or account manager
Able to translate the project scope into clear tasks for the engineers and the EandI project team, and to manage and follow up, taking into account the available budgets and deadlines
Can build and maintain relationships with customers, partners, and supplier
Generally high level of all-around awesomeness
Good attitude and communication with clients to meet the client and system requirements.
Good teamwork with multi-disciplinary engineering knowledge

8. BS in Instrumentation Engineering with 3 Years of Experience

Knowledge of the process basis elements relevant to the water treatments plant.
Thorough knowledge of engineering practices and economic principles, calculation methods, design details, international codes and standards, procedures and specifications.
Capability to carry out documentation for project execution.
Significant experience in multiple industries e.g. Oil and Gas, Refining, Chemical, Pharmaceutical
Experience in brownfield sites including turnarounds, shutdowns, and commissioning.
Familiarity with ATEX, EMC, Low Voltage Electrical Equipment directives, Machine directive, SIL standards and application.
Previous experience in UF/MBR/RO technologies within the water industry
Up to date knowledge / experience of Electrical and package equipment including low voltage equipment and UPS systems.
Knowledge of electrical tools, methodologies, or equal training/experience.
Previous experience contracts with worldwide recognized main EPC contractors
Experience in managing outsourced Engineering Service Providers.
Experience in managing and work with foreign Engineering production Center, similar to InSourCE in Bangalore (India)
English and Russian are mandatory, and French
Strong leadership ability, communication skills, enthusiasm, and diplomacy.
Inquisitive, well organized and have a keen eye for detail.
Able to operate in an integrated team environment supporting and leading others with a desire and ability to build trust and respect throughout the team.
Flexible approach and able to work under pressure with a can-do attitude and a desire to win.

9. BS in Control Systems Engineering with 5 Years of Experience

Direct experience with plant process and equipment instrumentation including a wide variety of pressure, temperature, and flow devices.
Direct experience with process valving including a wide variety of manual valves, control valves, actuators, limit switches, valve positioners, and analog and digital indicators.
Direct experience with plant DCS and PLC systems hardware and wiring.
Proven effectiveness at troubleshooting control loops issues, and identifying problem components and interfaces.
Experience with configuring and troubleshooting machinery vibration protection systems.
Experience with configuring and troubleshooting process gas analyzers.
Experience with reading, creating and editing instrumentation loop drawings and electrical elementary drawings.
General expertise in large motors and related control systems
Experience in supporting or leading Root Cause Analysis, Cause and Effect, or FMEA methodologies.
Experience and knowledge of predictive maintenance methodologies and technologies.
Knowledge of or ability to learn the industrial gas production processes.
Ability to identify, define, estimate, plan and execute instrumentation maintenance and improvement projects in an industrial setting.
Has strong leadership skills to be able to implement change in a geographically diverse organization.
Possesses strong communications skills to be able to effectively communicate both up and down the organization structure.
Knowledgeable in industrial plant operations.
Can effectively identify and evaluate technical and business process opportunities and translate to financial terms to support investment and business case development.
Experience delivering results in a highly matrixed organization and the ability to influence others to deliver results.

10. BS in Electronics Engineering with 5 Years of Experience

Ability and willingness to thrive in a fast-paced, rapidly changing work environment
Driven, highly motivated, and committed to improvement
Experience with integrated hardware/software system test methodologies
Experience with analog data acquisition (4-20mA, 0-5V, RTDs, thermocouples, strain gages, pressure transducers)
Experience with digital data acquisition (RS-232, Ethernet, ARINC 429, MIL-STD-1553)
Experience with designing or interfacing with aircraft and/or rocket avionics hardware
Experience with cDAQ and PXI data acquisition hardware platforms, configuration and troubleshooting of DAQ hardware using NI-MAX
Experience with network engineering principles (IP networks)
Experience with signal conditioning and circuit protection methods
Familiarity with: Zuken E3 or similar design applications
Experience working as a technician or assisting technicians with installations
Knowledge of EMI/EMC consideration on aircraft or aerospace systems
Hands-on experience using the following equipment: digital multimeter, oscilloscope, adjustable power supply, MEGGER
Familiarity with NFPA hazardous location classification and installation requirements
Ability to periodically travel to test and launch site in Mojave
Self-starter with the ability to manage multiple activities and achieve results with minimal supervision.

11. BS in Mechatronics Engineering with 5 Years of Experience

Experience in natural gas transmission and distribution facilities or Oil and Gas Projects.
Working knowledge of Instrumentation/Control System Engineering and Design (schematics, I/O, interconnection and wiring drawings, control cabinet layout)
Working knowledge of control systems, DCS, PLC, HMI and Telemetry/SCADA
Working knowledge of Provincial and Canadian CSA Codes as applied to Oil and Gas projects
Working knowledge of software such as MS Office and MS-Project
Demonstrated ability to provide technical mentoring to Engineers in Training
Demonstrated ability to communicate effectively both verbally and in writing
Demonstrated ability to provide technical mentoring to others
Demonstrated ability to conduct research
Demonstrated ability to analyze information and make sound judgements
Demonstrated ability to work effectively independently and within a team
Demonstrated ability to establish and maintain effective working relationships

12. BS in Industrial Engineering with 4 Years of Experience

Experience in Logistics and sorting equipment and automation including electrical and instrumentation design, operations, and maintenance
Has experience in leading a group of projects teams including suppliers and contractors
Experience working with foreign ASM (Automated Sorting Machine) suppliers
Can work with and lead cross-functional teams in planning and implementation of projects across Shopee Xpress.
High proficiency in Microsoft Office and Google office Suite
Experience in project management, data analysis, and financial analysis.
Familiarity with applicable engineering standards and design in a logistics application
In-depth knowledge of and experience designing industrial electrical systems
Excellent verbal and written communication skills
Excellent interpersonal and customer service skills to effectively interface with production groups
Excellent organizational skills and attention to detail
Excellent time management skills with a proven ability to meet deadlines
Strong analytical and problem-solving skills

13. BS in Electrical Engineering with 4 Years of Experience

Conversant with ASME/ANSI, API, ISO, IEC, AGA, GPA and other international codes and standards applicable for flow measurement systems and ability to execute tasks independently.
Knowledge in Control Panel, DCS, SCADA system, RTU.
Experience in the design/project execution of gas metering and instrumentation systems for natural gas industry.
Fluent in oral and written English and preferably in another language useful to the region covered.
Good knowledge of PC application programs.
Good personality, good interpersonal and communication skills, good analytical skills and judgmental skills.
Proficiency in a windows based environment and software (Word, PowerPoint, project, advanced excel and access)
Experience in seeing projects through full lifecycle from requirements, design, detailing and commissioning.
Knowledge of Instrumentation and Control design, HVAC or distribution systems and system design, Safety Case construction and Nuclear Safety requirements placed on systems
Practical knowledge of industrial power systems, electronic and solid state control systems, AC and DC powered machinery, distributed process control systems, PLCs, HVAC systems, and uninterruptible power systems.
Experience in an industrial manufacturing or contract engineering role.
Demonstrated project management experience involving electrical and instrumentation-related disciplines

14. BS in Electronics Engineering with 8 Years of Experience

Electrical engineering experience.
Experience with a fundamental understanding of PSM (Process Safety Management) systems.
Possesses an understanding of National Electrical Code, with emphasis in hazardous (electrically classified) locations, and Electrical Safety in the Workplace.
Knowledge of SAP, Microsoft Word, PowerPoint and Excel
Experience working in a multinational environment
Excellent communication skills, both verbal and written.
Excellent presentation skills.
Professional working proficiency in English and German language
Experience and knowledge of Programmable Industrial Control Systems including SCADA and DCS and Profibus, Profinet and ASI Network Protocols
Knowledge of safety-related control systems - BS 61508, 61511, 61513 with a thorough understanding of fault detection techniques including utilising Programmable Logic Controllers

15. BS in Instrumentation Engineering with 7 Years of Experience

Working knowledge of PLC and/or DCS systems.
Working knowledge of low voltage and medium voltage principles.
Working knowledge of Network equipment.
Working knowledge of industrial power and grounding principles.
Ability to read and understand and develop piping and instrumentation diagrams, loop diagrams, electrical schematics, instrument specifications, instrument location plans, and electrical one-line diagrams.
Strong English communication skills (written and verbal).
Ability to hold self and others accountable to meet commitments
Ability to build partnerships and work collaboratively with others to meet shared objectives
Strong nimble learning skills: Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder.
Ability to gain the confidence and trust of others through honesty, integrity and authenticity
Experience in DCS implementation and signal wiring design
Experience in food and beverage, chemical, bio-tech, oil and gas, petrochemical, mining and pharmaceutical industry process
Knowledge of 2D and 3D CAD tools (AutoCAD, Autodesk Inventor, Dassault SolidWorks)

16. BS in Control Systems Engineering with 6 Years of Experience

Ability to contribute to the development of PandIDs with respect to measurement and control.
Ability to develop control narratives.
Ability to specify process instrumentation and develop installation details.
Ability to size control valves using appropriate software.
Ability to develop specifications and data sheets for instrumentation, analyzers, control systems and actuated valves.
Knowledge of the standards that apply to instrumentation and controls
Ability to act as discipline engineer of record for projects that require professional engineering certification.
Knowledge and application of company engineering design and CAD drafting standards.
Programming experience with Programmable Logic controller (PLC), Human Machine Interface (HMI), and/or Distributed Control System (DCS) equipment.
Ability to lead a small team to deliver on commitments.
Ability to deliver presentations of Hargrove Engineers + Constructors services.
Working knowledge of CAD software, either AutoCAD, Microstation or both.

17. BS in Mechatronics Engineering with 4 Years of Experience

Experience in electrical engineering
Strong written and verbal communication skills and experience with computer system applications, including Word, Excel, MS Project
Experience with Engineering, Electrical, and Controls is preferable.
Broad understanding of electrical power distribution systems of the low, medium, and high voltage
Experience with control systems including Emerson DeltaV and Rockwell Allen Bradley PLCs
Knowledge of electrical software tools and systems
Must also be familiar with Microsoft Office Packages (Word, Excel, Access, PowerPoint, Visio), Revit, AutoCAD, and Bluebeam Revu.
Experience in the process industry working as a system integrator.
Good English and interpersonal relationship ability are critical for the role.
Self-motivated initiative in abundance.

18. BS in Automation Engineering with 7 Years of Experience

Knowledge of RF and analog circuit design, amplifiers, digitizers, digital filter design in gate arrays, and feedback control systems
Project experience obtained from previous employment, internships or design projects in regular coursework
Knowledge of analog design simulation tools, MATLAB, LabVIEW
Knowledge of computer programming languages such as C/C++, Perl, Python
Knowledge of FPGAs and VHDL
Knowledge of the Linux operating system and Microsoft Office applications
Experience in chemical or refinery design
PLC and DCS programming experience
Proficient in Microsoft Office applications.
Strong communication skills.
Ability to work collaboratively with domestic and international teams

19. BS in Industrial Engineering with 1 Year of Experience

Experience with power, battery and battery management system design, including a strong background in distribution and control principles
Hands-on experience with battery charging and discharging and design experience to the component level.
Additional background in high speed analog, digital, and mixed-signal circuit analysis, simulation, design, test, troubleshooting, signal integrity, power, and grounding, and general board layout principles
Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion
Experience in the design, development, test and operation of vehicle RF Avionics systems.
Demonstrated experience specifying and designing high-reliability safety-critical electronics
Familiarity with IPC-A-600/610, DO-254 and similar standards
Strong troubleshooting skills and the ability to problem-solve
Technical knowledge of I&E design, specification, documentation, installation, and maintenance.
Familiarity with power system equipment evaluation/selection, maintenance and safe work practices with voltages ranging from 50 V to 69 kV.
Ability to effectively prioritize multiple tasks to support the organization with strong teamwork and communication skills.

Relevant Information

Electrical and Instrumentation Engineer Skills, Experience, and Job Requirements

Electrical and Instrumentation Designer Skills, Experience, and Job Requirements

Electrical and Instrumentation Supervisor Skills, Experience, and Job Requirements

Electrical and Instrumentation Technician Skills, Experience, and Job Requirements