ELECTRICAL AND INSTRUMENTATION TECHNICIAN SKILLS, EXPERIENCE, AND JOB REQUIREMENTS

Published: Dec 27, 2024 - The Electrical and Instrumentation Technician excels in troubleshooting, skilled in reading electrical drawings, and adept at preventive and predictive maintenance. Brings extensive experience with plant power distribution, lighting systems, and advanced motor controls, including expertise in Bailey DCS and Allen Bradley PLCs. Known for a strong safety focus, reliable attendance, and the ability to work independently while maintaining professional communication.

Essential Hard and Soft Skills for a Standout Electrical and Instrumentation Technician Resume
  • Troubleshooting
  • Electrical Drawing Interpretation
  • Preventive Maintenance
  • Predictive Maintenance
  • PLC Programming
  • Instrumentation Calibration
  • Motor Drive Installation
  • Power System Analysis
  • Control System Design
  • Electrical Code Compliance
  • Problem Solving
  • Effective Communication
  • Attention To Safety
  • Adaptability
  • Team Collaboration
  • Time Management
  • Attention To Detail
  • Critical Thinking
  • Professionalism
  • Work Ethic

Summary of Electrical and Instrumentation Technician Knowledge and Qualifications on Resume

1. BA in Electrical Engineering with 5 years of Experience

  • Demonstrated recent experience repairing and servicing and troubleshooting industrial medium voltage and below electrical equipment in a maintenance capacity or have the equivalent professional accredited training.
  • Must be able to wire single and triple-phase motors and diagnose installed motors for insulation, winding, and resistance defects based on motor nameplate specifications and megameter readings.
  • Must be able to explain key circuitry differences between AC and DC circuits. 
  • Must be able to explain short circuit protection, overload protection, and demonstrate NFPA 70E safety practices relating to installing, troubleshooting, and maintaining these devices.
  • Must have demonstrated experience and ability to read elementary, single line and schematic drawings and to explain the path from the source power down to the end device.
  • Must have experience in identifying ground fault on a 480vac, three phase, low impedance grounded system including testing the condition of fuses and preforming the proper procedure in replacing them safely on a three phase 480vac system.
  • Must possess understanding of, and ability to, troubleshoot PLC programming circuits including knowledge of I/O modules, PLC architecture, and use of proper PLC troubleshooting techniques.
  • Must understand the function of a variable frequency drive (VFD) and can explain different signals that are used to control the VFD speed reference and have working knowledge of VFD installation and the basic setup parameters for new drives.
  • Must be able to work in a manufacturing plant environment.
  • Must be able to work in a wet and cold environment with moderate to high noise volume.

2. BA in Instrumentation Technology with 4 years of Experience

  • Troubleshooting skills
  • Electrical drawing reading skills
  • Preventive and predictive electrical maintenance practices
  • Working knowledge of: Lighting systems, Plant power distribution system, Instrumentation devices and systems, Motor drives and controls, Communication systems, Stand-by power systems
  • Must demonstrate the ability to learn new applications.
  • Ability to work independently and communicate in professional matter
  • Electrical and Instrumentation experience 
  • Bailey DCS and/or Allen Bradley PLC experience 
  • Electrical and Instrumentation experience in the power generation industry strongly
  • Experience with variable speed drives, instrumentation, and control systems
  • Demonstrated focus and attention to safety
  • Good attendance and attitude
  • Excellent communication skills
  • Ability to think independently, while working within company structures and guidelines

3. BA in Industrial Automation with 6 years of Experience

  • Previous Electrical experience in the industry is desirable but not essential or a general understanding of the water industry and instrumentation.
  • Understanding of flow meters and general principles of operation.
  • Experience with Radio systems and or Data Loggers.
  • Be a team player with a friendly and outgoing disposition.
  • Be a punctual, motivated and organised self-starter who is enthusiastic and conscientious about completing work on time and to a high standard.
  • Demonstrate a positive approach to work and be able to work well unsupervised on own initiative and as part of a team.
  • Highly proficient in spoken and written English
  • Strong analytical and organizational skills
  • Excellent interpersonal and communication skills when working with other departments as part of a team

4. BA in Electronics Engineering with 5 years of Experience

  • Personal computer proficiency (Internet, word processing, spreadsheets), and other software used by the company.
  • Strong interpersonal abilities to support team philosophy and strategy, mentoring/coaching activities
  • High mechanical aptitude and ability to work with simple mechanic’s hand tools.
  • Familiar with codes and standards associated with wiring and conduit.
  • Comprehensive knowledge of applicable chemical manufacturing process and hazards within area or site
  • Understanding of electrical hazards and safety, and ability to troubleshoot electrical systems, with support from central engineering.
  • Troubleshooting experience with close support of production equipment as a first class journey-level electrician
  • Excellent teams skills
  • Understanding of National Electric Code (NEC)
  • Experience with electric motors, drives, and PLCs
  • Knowledge of AC/DC drives, PLC and Servo Systems
  • Ability to perform EandI maintenance and construction on low and medium voltage electrical systems
  • Experience using EandI test equipment including multi-meters, oscilloscopes and ammeters
  • Familiar with principles of measurement, calibration and control of pressure, temperature, flow, level consistency, PH etc.
  • Excellent computer literacy

5. BA in Control Systems Engineering with 5 years of Experience

  • Experience in high speed manufacturing or industrial environment
  • Experience with electrical controls / PLC trouble shooting, programming and repair 
  • Demonstrated background of mechanical and electrical aptitude
  • Must be a self-directed worker, capable of working in a team environment to solve problems and implement solutions
  • Must be able to effectively read, comprehend, interpret, record and apply information from documents 
  • Good knowledge/understanding of relevant Australian Standards including AS3000
  • Able to work on PLCs, DCS and Smart Instruments
  • Have initiative, flexibility, and the ability to work in a dynamic and changing environment
  • Developed skills in coordination and meeting deadlines
  • Experienced Electrical and Instrumentation Technician that has worked within the construction or maintenance environment
  • Knowledge of the safe use of hand/power tools and equipment required to perform tasks
  • Ability to work safely and understand best practice in a maintenance environment
  • Excellent interpersonal and communication skills

6. BA in Electrical Engineering with 6 years of Experience

  • Experience in instrumentation of equipment 
  • Natural gas industry experience 
  • Demonstrated knowledge and experience in the design, installation and troubleshooting of electrical equipment
  • Ability to read and interpret PandIDs, Electrical Schematics and One-line diagrams 
  • Working knowledge of PLC, HMI and automated equipment and standard instrumentation types (4-20 mA, 0-5 V, pulse, MODBUS) 
  • Ability to work independently AND with cross-functional teams of Electrical technicians, mechanics, welders, operations personnel, engineers, and safety professionals 
  • Manufacturing plant maintenance and repair experience 
  • Detailed-oriented and multi-tasking
  • Able to work in a team environment
  • Excellent verbal and written communication skills
  • Self-motivated, needing minimal supervision
  • Safe working knowledge related to electrical and mechanical activities
  • Computer Applications knowledge for Word, spreadsheets and charting
  • Experience variable frequency drives and motion control

7. BA in Instrumentation Technology with 4 years of Experience

  • Experience in manufacturing, commissioning, maintaining and supporting site systems.
  • Experience in Permit-to-work systems and experience of carrying out LOTOTO procedures.
  • Experience working in hazardous areas and ideally be Compex certified.
  • Experience in calibration and verification of instrumentation.
  • Experience working with industrial networks.
  • Experience interrogating and programming PLC's - preferably Siemens S7 and TIA Portal
  • Experience working with AC/DC drives and Inverters
  • A good understanding of maintenance on fully automated systems and appreciation of the associated hazards.
  • Excellent written and verbal communication skills with the ability to build relationships
  • Strong attention to detail and problem solving skills
  • Highly organized with the ability to work autonomously and in a team
  • Strong focus on safety practices within an operations environment
  • Proven Electrical and Instrumentation experience in a plant environment

8. BA in Industrial Automation with 3 years of Experience

  • Considerable knowledge of progressive management concepts, mastery of mechanical, electrical, and instrumentation skills.
  • Considerable knowledge of BAT theories and devices.
  • Considerable knowledge of the water systems of Augusta and EPD rules and regulations.
  • Good communication skills, both oral and written.
  • Demonstrated ability to work independently or with a team.
  • Established ability to perform under high stress and remain congenial.
  • Must have the ability to actively listen to others to understand needs and work well with others.
  • Must possess and maintain the following certifications: International Society of Automation (ISA) Certified Control Systems Technician (CCST) Level I, Water Distribution Systems Operator or Water Collections Systems Operator and Fiber Optic Installer. 
  • Experience as a Journeyman Electrical and Instrumentation Technician in an Industrial environment 
  • Experience with Computerized Maintenance Management Software (CMMS)
  • Experience with mechanical maintenance, including fluid handling and conveyor systems, hydraulic systems and accumulators, and valve identification and application, and welding and machining
  • Must work in collaboration with management and operations personnel on E/I-related matters
  • Must support operations’ personnel, performing troubleshooting and equipment repairs
  • Must demonstrate safe and clean work practices at all times
Relevant Information
Electrical and Instrumentation Engineer Skills, Experience, and Job Requirements
Electrical and Instrumentation Designer Skills, Experience, and Job Requirements
Electrical and Instrumentation Supervisor Skills, Experience, and Job Requirements