Job Summary: 

• Take existing floor plans or building shells and use them to generate material storage solutions for customer review and/or approval, for sales proposals and engineering installations drawings.
• Develop elevations drawings of various types of solutions for customer review and/or approval, for sales proposals and engineering installation drawings.
• Review and understand internal engineering standards.
• Adherence to the standard styles and tools to generate consistent, quality drawings.
• Interface with sales people and customers on projects to develop a scope of work.
• Perform Mechanical drafting using AutoCad 2015 and in house software of single line connection diagrams including simple detailed Marine mechanical drawing
• Assist in accurate drawings of technical detail in security and alarm systems
• Prepare conduit drawings, detail design, tender and working drawings with the use of technical computer software
• Meet standard requirement of the company to fulfill the customers' need
• Observe the environmental, health and safety policy and regulations.
• Creating and editing 3D BIM, Construction Drawings, Shop Drawing, and Part Sheets.
• Manage all necessary documents that are included in each specific project.
• Create steel erection drawings
• Calculate building components and develop the ability to accurately detail standard projects.
• Carry out suggestions and directions as expected, to start recognizing areas of personal strength.
• Accurately judge required time for completion of tasks.

Skills on Resume: 

• Mechanical Drafting (Hard Skills)
• AutoCAD Proficiency (Hard Skills)
• 3D Modeling (Hard Skills)
• Document Management (Hard Skills)
• Standards Compliance (Hard Skills)
• Customer Interaction (Soft Skills)
• Detail Orientation (Soft Skills)
• Project Coordination (Soft Skills)

Job Summary: 

• Create technical drawings based on design concept and specifications
• Coordination with architects and Interior Designers, receiving information and details to incorporate in the drawings
• Preparation of technical drawings for presentations, following architects' and interior designer instructions
• Support in consolidating MGM drafting standards and implementation
• Ensure that both properties technical drawings are updated and accurate, following the standards
• Undertake any reasonable tasks and secondary duties
• Meet the attendance guidelines of the department and adhere to departmental and company policies
• Draw and develop construction documentation and detailing based on preliminary concepts, sketches, engineering calculations, contract documents, specifications and submittals.
• Create accurate models to be used for fabrication and installation.
• Working with the engineering team to map proposed and completed construction projects
• Mapping subdivisions and pipelines as constructed
• Create material lists for projects, and other duties as required of a qualified Draftsman
• Read and understand gas piping details
• Learn all skills for any machine and/or software necessary to accomplish tasks and all other duties 
• Occasional fieldwork involving the right of way staking and taking GPS points of pipelines

Skills on Resume: 

• Technical Drawing (Hard Skills)
• Drafting Standards Compliance (Hard Skills)
• Construction Documentation (Hard Skills)
• Model Creation (Hard Skills)
• Project Coordination (Soft Skills)
• Attention to Detail (Soft Skills)
• Policy Adherence (Soft Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Produce 2D and 3D drawings
• Coordinate with project managers and clients/designers for any revisions/amendments of drawings.
• Ensure all drawing creation, amendment, receiving, transmittal, recording, and disposal follows statutory regulations.
• Attend site surveys and take relevant measurements to translate into drawings.
• Prepare necessary calculations pertaining to design work.
• Assist with Project team on project planning and deployment of the project.
• Draw plans with electricity and instrumentation and control
• Perform lists of cables, instruments and electrical equipment
• Conduct the plans according to the rules of the art and the standards of some of the customers
• Accompanying other designers in the infringement of Objectives
• Working in collaboration with customers, partners, contractors, engineers and designers
• Visit customer locations and take field measurements and transfer them into fabrication drawings
• Utilize CAD equipment and drafting packages to prepare clear, complete and accurate working plans and detail drawings from detailed or rough sketches
• Read and interpret blueprints, technical drawings, schematics and other sketches
• Perform mechanical engineering calculations to size and specify mechanical system components
• Collaborate with Customer Engineers regarding ship production. and installation by field crews
• Communicate effectively with customers, shop and field crews to ensure on time quality project completion.

Skills on Resume: 

• 2D and 3D Drafting (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Measurement and Surveying (Hard Skills)
• Technical Calculations (Hard Skills)
• Project Planning Support (Hard Skills)
• CAD Proficiency (Hard Skills)
• Client Coordination (Soft Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Draw partial design plans, change drawings and other related work
• Collect and organize project data, and communicate project instructions and information
• Independently complete the drawing work of the project construction drawing, and be able to complete the detailed design of the construction drawing and the drawing of the large sample node
• Deepen the design drawings and convert the design drawings into standard production and processing drawings
• Check the drawings, screen the project drawings in the company's contract, review the relevant data, and conduct on-site surveying and mapping of the required data
• Responsible for the docking with the outsourcing design unit, review the drawings, and complete the drawings
• Communicate with customers to ensure that the drawings are accurate, the data is complete, and the customers are signed for confirmation, and the order is placed for production.
• Make drawing ( 3D) using AutoCAD and interpret engineering drawing
• Troubleshoot and resolve design / CAD problems
• Filing and management of digital and hardcopy drawings
• Work closely with Engineer and project team to ensure that drawings are accurate and in keep with design intensions
• Cooperate with engineers on datelines and ensure timely completion of shop drawing
• Handle any ad-hoc task assigned from time to time
• Create 2D/3D models, drawings and studies of structures and systems, equipment devices and materials in Inventor and/or AutoCad
• Perform clash checks, tolerances checks, functional studies and simulations to check the fitting of the designed parts
• Ensure the drawings are checked and approved by yourself and by the Senior Engineer or Engineering Manager

Skills on Resume: 

• Construction Drafting (Hard Skills)
• Project Data Management (Hard Skills)
• Design Review (Hard Skills)
• CAD Proficiency (Hard Skills)
• Customer Communication (Soft Skills)
• Problem Solving (Soft Skills)
• File Management (Hard Skills)
• Team Collaboration (Soft Skills)

Job Summary: 

• Be responsible for technical project drawing and design
• Provide and present drawings, data and design information
• Coordinate with relevant parties to incorporate the projects needs
• Produce the quality drawings to meet client requirements of projects within given timeframes
• Modify and advise on altering design, variations and changes
• Liaise with different stakeholders, including Engineers, Project Manager, Technical Director, etc.
• Draw lifting plans using AutoCAD
• Develop full spectrum of drafting support for new projects and in accordance with Approved Construction / Architectural drawings / Specifications and as per Architect and Consultant requirements
• Preparation of Materials, production releases and cutting lists for fabrication
• Co-ordination and monitoring of drawing submission to Main Contractor
• Prepare updated drawings according to project requirement
• Revise drawings and layouts reflecting design changes to ensure consistent documentation of the project
• Check and verify design drawings to conform to specifications and design data
• Amend the drawings based on the latest comments
• Monitor all changes and keep complete and up-to-date accurate drawings at all times
• Recording, executing and maintaining technical documents

Skills on Resume: 

• Technical Drawing (Hard Skills)
• Project Coordination (Hard Skills)
• AutoCAD Proficiency (Hard Skills)
• Drafting and Design (Hard Skills)
• Stakeholder Liaison (Soft Skills)
• Design Modification (Hard Skills)
• Quality Assurance (Hard Skills)
• Documentation Management (Hard Skills)

Job Summary: 

• Maintain the Company’s building management information systems by updating and entering data related to the Company’s assets
• Create submittal packages for sales team members, construction approval authorities and inspectors
• Create 3D and/or modeling drawings for new projects using Solidworks or like software
• Prepare detailed engineering drawings using AutoCAD or like software
• Organize supporting information to produce bills of materials and product manuals
• Help establish / maintain companys standards for CAD techniques
• Assist Engineers as needed to develop new designs and detailed drafting
• Coordinate with supervisors and project manager
• Read and interpret architectural blueprints thoroughly and create Architectural instillation & construction drawings.
• Interpret Architectural drawing to produce complete fabrication drawing packages and supporting documentation.
• Communicate with Architectural Designers and Customer to facilitate the design process from conceptual drawings to actual products.
• Work with Engineering and production to assist in producing the design of finished products in accordance with architectural plans.
• Successfully lead and coordinate projects, while interacting with Customer Service, Engineering and Sales from start to finish.
• Develop construction drawings for appropriate construction methods together with appropriate plant selection and temporary works solutions
• Prepare documentation and presentation material 
• Provide drawing and technical documentation
• Maintenance of CAD standards, systems and procedures while meeting specified timeline

Skills on Resume: 

• Data Management (Hard Skills)
• 3D Modeling (Hard Skills)
• CAD Proficiency (Hard Skills)
• Engineering Drafting (Hard Skills)
• Project Coordination (Hard Skills)
• Interpretation of Blueprints (Hard Skills)
• Communication Skills (Soft Skills)
• Leadership and Coordination (Soft Skills)

Job Summary: 

• Use specifications, sketches, drawings, and related data to produce detailed Computer Assisted Drafting (CAD) drawings while following instructions from project coordination and other drafters.
• Considering instructions from project coordination and other drafters, review specifications, sketches, drawing and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• Create drawing numbers, Drafting Work Requests (DWR) and Inventory Control Numbers (ICN)
• Archive and file drawings, electronically save all drawings, revise drawings per customer and project coordination instructions and create As-built and Certified Final drawings.
• Create electronic versions of older drawings and bring them up to current standards.
• Layout and draw schematic, orthographic, or angle views to depict functional relationships of components and assemblies.
• Create bills of material, schedule of openings, and required notes on drawings.
• Understand related reference documents and drawings prepared by others.
• Create and maintain design tables and assist in maintaining libraries, blocks and CAD standard files.
• Thoroughly understand engineering and manufacturing standards and tolerances such as ASME, ISO, ANSI, ASTM, OSHA, etc., and apply them to daily activities.
• Assist in training, checking and mentoring lesser skilled Drafters.
• Creation of bill of materials (purchasing specifications, item creations and BoM on Oracle)
• Provide technical assistance to other departments
• Work in collaboration with remote teams for the realization of 2D drawings
• Manage CAD tools (AutoCAD, Creo and SW) and PLM Windchill
• Production of shop drawings for meeting the design requirements
• Participate in the preparation of drawings for projects involving hydropower plants and stations.
• Prepare technical drawings on equipment physical specifications and positioning using AutoCAD, REVIT, and other software.

Skills on Resume:

• CAD Drafting (Hard Skills)
• Documentation Management (Hard Skills)
• Drawing Standardization (Hard Skills)
• Schematic Layout (Hard Skills)
• Material Scheduling (Hard Skills)
• Standards Compliance (Hard Skills)
• Technical Training (Hard Skills)
• Interdepartmental Support (Soft Skills)

Job Summary: 

• Prepare drawings of all existing products and potential new products to provide detail for all product manufacture and development.
• Provides technical support to customers, contractors, agents and distributors as well as to all levels within the organization to ensure proper utilization and installation of products.
• Serves as inside sales support assisting customers with overall product knowledge, product availability and pricing and the status of order.
• Provides technical information with regard to electronics, product installation, buoyancy, etc. to customers, field services, and contractors to assist with troubleshooting, repairs and to protect product warranty.
• Assists Customers with fitting layout on tank drawings prior to production, makes recommendations for changes that may be necessary to strap locations, tank burial depths, UL limitations.
• Review construction documents, project submittals, product information and related materials to produce coordinated production drawings for factory use
• Interface with external design and construction professionals to clarify and/or confirm information provided in materials listed above
• Interface with internal team members, including project management, operations management, estimating and procurement staff to produce a complete and coordinated set of production drawings
• Develops solutions to technical and design problems based on fabrication methods and practices
• Follows established procedures and protocols for production drawings
• Assures document standards are met and archives documents appropriately
• Identifies potential conflicts, issues or other problems and develops solution recommendations to present to Project Manager.
• Thoroughly monitors and reviews own work for accuracy and completeness.
• Follows standard procedure for quality assurance, such as standardized checklists, for each document.
• Design pump units that meet customer specifications and Flowserve standards, on the basis of existing pumps or in the context of new development requests, for nuclear and industrial applications.
• Creation of assembly and detail drawings (cross sectional drawings, general outline drawings, foundry drawings, mechanically-welded assembly drawings, machining drawings and piping drawings)

Skills on Resume: 

• Technical Drawing (Hard Skills)
• Technical Support (Hard Skills)
• Sales Support (Hard Skills)
• Construction Documentation (Hard Skills)
• Design Coordination (Hard Skills)
• Problem Solving (Soft Skills)
• Interdepartmental Communication (Soft Skills)
• Documentation Standards Compliance (Hard Skills)

Job Summary: 

• Design and draw as-builts, floor/space plans and renderings needed to bring new concepts to life
• Create technical drawings based on given specifications and calculations
• Work with professionals in field to obtain the structure’s details
• Incorporates these specifications into drawing and plans
• Use CAD (AutoCAD) systems to create, save and view drawings and plans
• Calculate structural strength, weight limitations, requirements in materials assessing building capacity limits, and estimating construction costs
• Describe production methods step-by-step
• Identify potential operational issues and redesign products to improve functionality
• Add details to architectural plans from knowledge of building techniques
• Prepare multiple versions of designs for review by architects and engineers
• Specify dimensions, materials, and procedures for new products
• Ensure final designs comply with regulations and quality standards
• Work from rough sketches and specifications created by architects and engineers
• Works quickly and efficiently to maintain production goals and complete assignments on time.
• Strives to continue learning new technologies and methods associated with current design trends.
• Working as Drafter on medium to large scale joinery projects. 
• Working within a team of drafters who fully understand drafting for the internal joinery and fit-out packages.

Skills on Resume: 

• CAD Design (Hard Skills)
• Technical Drawing (Hard Skills)
• Structural Analysis (Hard Skills)
• Cost Estimation (Hard Skills)
• Production Specification (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Problem Identification (Soft Skills)
• Collaborative Design (Soft Skills)

Job Summary: 

• Design, draft, and check drawings and documentation for projects
• Design special components or modify existing components as required by customers.
• Review, interpret, and explain models and drawings.
• Verify fit, form, and function of created three dimensional models.
• Calculate component dimensions, clearances, and tolerances (GD&T).
• Review drawings to ensure compliance with established internal CAD standards
• Produce gear drive assembly layouts for standard and modified gear drive systems
• Respond quickly to the shop floor’s needs by addressing issues that may surface during production regarding the manufacturing specifications, Bill of Material, or routings.
• Manage input data for the ERP system including, but not limited to, bills of assembly & item master
• Assist with creation of Engineering Change Requests (ECRs) which pertain to product or process changes
• Prepare and Deliver customer approval drawings, fabrication drawings and installation drawings on time and with accuracy
• Detailing various ornamental railings, trellis, and other structural designs utilizing AutoCAD for all work
• Prepare conceptual design and draft submittal drawings for customer, final installation and fabrication drawings
• Develop new product designs in communication with drafting supervisor
• Deliver drawings on time based on project schedule requirements
• Troubleshooting drafting design problems and fabrication issues.
• Ensure compliance with drawing standards.

Skills on Resume: 

• CAD Drafting (Hard Skills)
• Component Design (Hard Skills)
• Model Verification (Hard Skills)
• Geometric Dimensioning (Hard Skills)
• Standards Compliance (Hard Skills)
• ERP Management (Hard Skills)
• Engineering Change Management (Hard Skills)
• Rapid Response (Soft Skills)

Job Summary: 

• Reviewing and negotiating fixed costs and bringing cases to a conclusion in a timely matter
• Drafting Costs Schedules, Part 23 Applications and Part 8 Proceedings 
• Attending hearings of applications within the fixed costs team
• Providing assistance to other team members 
• Undertaking subdivision and associated works design and documentation including bulk earthworks design, road and drainage design, sewer and water reticulation design, ensuring all comply with Council and service authority standards and relevant codes
• Producing timely, efficient and accurate stage designs
• Liaising with council, services and other approval authorities
• Liaising with external consultants to coordinate electrical and telecommunications designs
• Drafting and checking plans to achieve approval and compliance
• Assisting in the preparation of contract documentation and contract administration including the preparation of tender estimates
• Providing technical support for Integra's construction and contract administration activities
• Maintains an open line of communication with Sales Executives and Project Managers.

Skills on Resume: 

• Cost Negotiation (Hard Skills)
• Legal Drafting (Hard Skills)
• Hearing Attendance (Soft Skills)
• Team Collaboration (Soft Skills)
• Civil Engineering Design (Hard Skills)
• Regulatory Compliance (Hard Skills)
• Stakeholder Liaison (Soft Skills)
• Contract Administration (Hard Skills)

Job Summary: 

• Regularly prepare drawings and calculations using Dura components
• Assist with quotations using information provided by the sales team, or customers, using the most appropriate CAD software and/or Microsoft Excel by producing Bills of Quantities.
• Liaise with Sales Managers regarding technical and practical issues relative to enquiries and orders ensuring sales contact is kept up to date and ensure that an informed solution is presented.
• Liaise and offer assistance to production/fabrication staff where necessary by producing drawings from appropriate templates.
• Assisting with marketing and sales initiatives, including technical manuals and show stands.
• Maintain accurate suite of BIM compliant product range drawings for marketing and internal and external use.
• Accurately filing documentation and logging of tasks using internal reporting systems.
• Contribute towards design proposals and new product solutions.
• Attend regular meetings to share lessons learned and liaise with key departments for process change requests
• Work closely with Engineers, ensure successful completion of assignment within given timeline.
• Aassume responsibilities of small projects on the drafting, procedures, drawing preparation for all stages
• Collaborate and Coordinate with other disciplines design-changes and model challenges.
• Carry out drafting work in compliance with office standards and procedures.
• Adopt proper procedures and drafting for the different project stages & authority submissions.
• Work closely with the Project Engineer, assisting him/her in liaison with the Project Architect, Technical Teams 
• Coordinate with the personnel assigned to the projects, and ensure consistency in output & presentation.

Skills on Resume: 

• CAD Software Proficiency (Hard Skills)
• Bill of Quantities Preparation (Hard Skills)
• Sales and Technical Liaison (Soft Skills)
• BIM Compliance (Hard Skills)
• Documentation Management (Hard Skills)
• Design Proposal Contribution (Soft Skills)
• Project Management (Soft Skills)
• Cross-disciplinary Coordination (Soft Skills)

Job Summary: 

• Be responsible for the planning of materials and allocation of work in the drawing office
• Assist the Project and Production Manager(s) in achieving the required project contribution
• Work jointly with the Project Management team to develop project schedules, plans, task assignments and time estimates
• Interface at all levels of organization(s), including Client Management
• Give presentations or briefings to clients on all aspects of a project
• Participate in phase, milestones and final project reviews
• Conduct project assessment and identify resource needs, schedule and budget recommendations.
• Managing and supervising sub-contractors in conjunction with the Project Manager.

Skills on Resume: 

• Materials Planning (Hard Skills)
• Project Scheduling (Hard Skills)
• Task Management (Hard Skills)
• Client Relationship Management (Soft Skills)
• Presentation Skills (Soft Skills)
• Project Review Participation (Soft Skills)
• Resource Allocation (Hard Skills)
• Sub-contractor Management (Soft Skills)

Job Summary: 

• 3D modelling and engineering/manufacturing drawing generation
• Ensure designs conform to Company Standards
• Commitment to becoming a design specialist in the range of services offered by the company
• Ensure the complete design meets clients / internal design specifications
• Generating complete design data pack for manufacturing and assembly
• Responsible for creation of project Bill of Materials
• Follow management requirements by maintaining project drawing registers
• Create detailed production drawings and site work drawings
• Generation of all drawings / instructions for the correct and safe assembly and installation
• Ensure that all work carried out is in accordance with the Groups procedures and standards.
• Carry out quality control inspections on fabrication activities in the manufacturing facility and suppliers, taking full ownership of the fabrication of own designs from start to finish.
• Generate and maintain any documents pertaining to the role as required by the relevant process / procedure
• Ensure drawings are issued in accordance with relevant specifications, standards, or procedures
• Control drawing office project documentation.
• Communicate with the projects and production team effectively to ensure alignment of the client requirements with the final product as well as effective flow of information.
• Request design review meetings where required to limit 3D design rework

Skills on Resume: 

• 3D Modeling (Hard Skills)
• Engineering Drawing (Hard Skills)
• Design Standard Compliance (Hard Skills)
• Bill of Materials Creation (Hard Skills)
• Quality Control Inspection (Hard Skills)
• Document Management (Hard Skills)
• Attention to Detail (Soft Skills)
• Project Ownership (Soft Skills)

Job Summary: 

• Drawing from inception of telecom site layouts using layered approach
• Drawing all main components in 3D to required level of detail
• Assembling 3D components to generate a variety of different site designs and applications
• Automatically producing bills of materials for all variations of site layouts and designs
• Producing a complete document pack for each variation to be used for construction and commissioning of sites by outside contractors
• Producing individual 3D and 2D document packs for every component identified
• Managing correspondence with various stakeholders and subject matter experts to ensure accurate information and data used to design all site components
• Produce layout drawings and calculations using AutoCAD
• Issue drawings with covering letters/emails
• Contact Clients, Architects & Engineers via telephone/email to obtain design details, comments /approval of working drawings
• Do take offs & schedules of materials, complete revisions, updates and alterations as projects evolve up to installation
• Act in a professional manner when communicating (both spoken & written) with Client's and Architects / Engineers
• Produce accurate layout drawings and calculations for Industrial roofing and cladding systems
• Seek advice and guidance from a Senior Designers/Engineer
• Understand the duties required under the Health & Safety at Work Acts and the Construction (Design and Management) Regulations
• Ensure all designs allow for a high quality of final products through sound engineering practice, allowing for welding access, cleaning, and effective cleaning and coating of surfaces.

Skills on Resume: 

• 3D Modeling (Hard Skills)
• AutoCAD Proficiency (Hard Skills)
• Bill of Materials Creation (Hard Skills)
• Document Management (Hard Skills)
• Stakeholder Management (Soft Skills)
• Professional Communication (Soft Skills)
• Detail Orientation (Soft Skills)
• Technical Drawing (Hard Skills)

Job Summary: 

• Create 3D modeling using E3D software for drawings
• Prepare detailed drawings from sketches, plans, specifications and verbal instructions
• Prepare storyboards for work procedures and tenders
• Amend drawings, traces and/or copies existing drawings
• Make layout and draw charts, graphs, and diagrams based on detailed information supplied by drafting supervisor or engineers
• Obtain an understanding of assignments including special requirements and schedules for completion
• Coordinate with drafting supervisor and liaise with engineer-in-charge
• Use recognized systems of symbols, legends, shading and lines specific to drawings.
• Calculate dimensions, weight limitations, and material requirements
• Prepare and review rough sketches
• Ensure that final designs comply with regulations and quality standards
• Shop drawings and as-built drawings

Skills on Resume: 

• 3D Modeling (Hard Skills)
• Technical Drawing (Hard Skills)
• Storyboarding (Hard Skills)
• Drawing Amendment (Hard Skills)
• Project Coordination (Soft Skills)
• Communication (Soft Skills)
• Problem Solving (Soft Skills)
• Regulatory Compliance (Hard Skills)