Job Summary: 

• Take responsibility for the preparation and filtration of buffers
• Prepare single-use manifolds for the execution of experimental work
• Take responsibility for clarification and filtration of viral harvests
• Be responsible for ultrafiltration and diafiltration of viral harvests
• Take responsibility for preparative chromatography on viral harvest
• Manage lab and equipment used for operational work, including stock of consumables and reagents 
• Maintenance of a clean and safe working area 
• Contribution to the selection and implementation of the most efficient single-use
• Take responsibility for results collection and analysis
• Correct use and tracking of quality system (procedures/checklist/working instructions, etc.)
• Adhere to standard operating procedures in all the operational tasks executed with a special emphasis on compliance with biosafety procedures for BSL-3 labs
• Contribute to general lab activities (housekeeping and maintenance)

Skills on Resume: 

• Buffer Preparation (Hard Skills)
• Manifold Preparation (Hard Skills)
• Viral Harvest Filtration (Hard Skills)
• Ultrafiltration (Hard Skills)
• Chromatography (Hard Skills)
• Equipment Management (Hard Skills)
• Biosafety Adherence (Soft Skills)
• Data Analysis (Hard Skills)

Job Summary: 

• Be creative and effective in the development of new or improved products
• Perform development and evaluation tests on vehicles
• Riding/driving vehicles for testing or mileage accumulation
• Operating vehicles in extreme conditions for extended periods
• Work with engineering to support calibration and development tests
• Provide guidance on chassis layout and ergonomics
• Utilize data acquisition loggers to fulfill test requests and/or issue resolution
• Analyze data and report back to the engineering team
• Keep good records and write concise test reports for tests conducted
• Provide feedback to the team for issue resolution, improvements, and cost reductions
• Maintain strict confidentiality
• Maintain a clean, safe work area and meet OSHA requirements
• Run and maintain some of the most advanced test cells in the country/world.
• Monitor and ensure the engine's health using upward of 300 channels of data from the engine.

Skills on Resume: 

• Product Development (Hard Skills)
• Vehicle Testing (Hard Skills)
• Driving Experience (Hard Skills)
• Calibration Support (Hard Skills)
• Data Acquisition (Hard Skills)
• Data Analysis (Hard Skills)
• Record Keeping (Hard Skills)
• Confidentiality (Soft Skills)

Job Summary: 

• Execute daily tasks in flavor delivery system development, flavor selection, and flavor application
• Prepare stocks and related product development trials and customer samples for projects/presentations.
• Assist in applying flavors and food ingredients to food products/recipes used for testing and demonstrations.
• Execute the daily selection of flavors from the portfolio.
• Select optimal flavors for projects according to specified requirements (i.e. customer, regulatory, legislation, cost).
• Participate in evaluations of flavors and flavor delivery systems in food applications.
• Actively maintain the flavor performance data.
• Participate in tasting sessions/presentations to customers/visitors.
• Support in building the local flavor collection by selecting the best flavors, leveraging technical information, sensory paneling techniques and commercial insights.
• Support in the communication of content and updates on collections regularly to technical/commercial teams.
• Support the application & development team in executing daily lab tasks.
• Manage flavor data, project data, and recipe documentation.
• Maintain a safe, clean, and organized lab environment following EH&S policies.

Skills on Resume: 

• Flavor Development (Hard Skills)
• Sample Preparation (Hard Skills)
• Flavor Application (Hard Skills)
• Flavor Selection (Hard Skills)
• Flavor Evaluation (Hard Skills)
• Data Management (Hard Skills)
• Tasting Sessions (Soft Skills)
• Lab Safety (Soft Skills)

Job Summary: 

• Maintain and become an expert operator on various pieces of lab equipment – including set-up, calibration, operation, and debugging.
• Modify existing or build new fixtures and tests needed to meet project deliverables
• Participate in the design of and assume responsibility for the execution of laboratory experiments
• Identify and articulate problems as well as develop and execute approaches to solving them
• Submit samples for various characterization methods and organize the associated data
• Function as a team member on R&D projects
• Implement solutions to resolve minor technical problems and lab equipment maintenance independently
• Contribute to formal written technical reports and help generate intellectual property
• Use vision systems and mechanical load frames to execute test plans
• Adapt and fabricate associated test tooling and fixtures
• Prepare test samples (e.g. cut test coupons, etc.) and submit them to appropriate laboratories, and collect result data.
• Perform data analysis in Excel and Matlab on collected experimental results. 
• Create plots and PowerPoint slides summarizing results

Skills on Resume: 

• Lab Equipment Operation (Hard Skills)
• Fixture Modification (Hard Skills)
• Experiment Design (Hard Skills)
• Problem Solving (Soft Skills)
• Data Organization (Hard Skills)
• R&D Collaboration (Soft Skills)
• Technical Reporting (Hard Skills)
• Data Analysis (Hard Skills)

Job Summary: 

• Assemble electrical and mechanical prototypes with general instructions from the Engineer
• During the build of prototypes, give manufacturability and PCBA BOM correction input to the Engineer.
• Create complete assembly sequence instructions and make suggestions for tooling for ease of assembly.
• Set up and run mechanical tests with general instructions from the Engineer
• Generate purchase requisitions to source parts, tools, or supplies with general instructions from the Engineer.
• Maintain certain lab and shop space in the spirit of 5S
• Keep lab tables, cabinets, and shelving clean and organized.
• Analyze written specifications, engineering drawings, rough sketches, CAD models, and verbal instructions 
• Plan layout and determine the sequence of operations for assembly of prototypes and test setups.
• Develop and build product prototypes, putting them together by hand.
• Test these prototypes in technical tests in the lab – often repetitively.
• Make several prototypes to be tested with consumers after the prototype successfully passes technical tests.
• Support product and data collection at the making line
• Prepare raw materials (e.g. sieve powders) to be able to build product prototypes
• Ensure all quality criteria are met and documented

Skills on Resume: 

• Prototype Assembly (Hard Skills)
• Manufacturability Input (Hard Skills)
• Assembly Instructions Creation (Hard Skills)
• Mechanical Testing (Hard Skills)
• Purchase Requisition Generation (Hard Skills)
• 5S Maintenance (Soft Skills)
• Specification Analysis (Hard Skills)
• Quality Documentation (Hard Skills)

Job Summary: 

• Under the direction of line management, facilitate the manufacturing of experimental, developmental, or other Technical Services product trials
• Collaborate and contribute with other functions to successfully implement technology changes in production. 
• Collaborate with R&D, Engineering, Validation, Manufacturing, Quality Assurance, Quality Control, and Customer Subject Matter Experts
• Support section leaders, project managers, Lean Six Sigma initiatives, and other department-related tasks as requested by supervisor
• Facilitate technology transfer from the R&D Laboratory to the Production environment
• Facilitate inter-site technology transfer within the Catalent network
• Facilitate the evaluation, development, and implementation of technology-based process improvements
• Work as part of a team to Identify new and alternative technologies to enable opportunities within the field of light management.
• Carry out sample preparation, trials, analysis, and report writing. 
• Help identify new processes of manufacture and carry out equipment and process testing.
• Evaluate results and make recommendations.
• Document all Lab work to support applications for Intellectual Property.
• Follow the prescribed Engineering standards in compliance with safety/environment and clean concept rules and monitor and analyze the results for improvement
• Evaluate new technologies or new types of equipment through external demonstration, prepare demos and product characterization when returning the demo.

Skills on Resume: 

• Manufacturing Facilitation (Soft Skills)
• Cross-Functional Collaboration (Soft Skills)
• Technology Transfer (Hard Skills)
• Process Improvement (Hard Skills)
• Sample Preparation (Hard Skills)
• Report Writing (Hard Skills)
• Compliance Monitoring (Soft Skills)
• Technology Evaluation (Hard Skills)

Job Summary: 

• Review and process CT Scan data and convert those files into 3D bone models used to develop patient-specific instrumentation
• Preparation of surgical planning guides
• Read and work from various clinical imaging including x-rays and CT scans.
• Dimension all drawings correctly, apply geometrical tolerancing, finish and etching details, and carry out tolerance stack calculations.
• Ensure standard templates used for design are current and updated in a timely fashion.
• Track the status of each case using internal software.
• Review patient data processed by coworkers.
• Accountable for meeting and/or exceeding business objectives.
• Provide support to the engineering team when necessary.
• Understand the product’s intended use and clinical procedures.
• Review activities performed by APDT
• Learn procedures, policies, processes, systems, and technology required.
• Work on problems in a limited scope, purposefully learning while gaining experience.
• Contribute to the project as a team member.
• Coordination with manufacturing, operations, and scheduling to meet the needs of the Blueprint cases schedule.

Skills on Resume: 

• CT Scan Data Processing (Hard Skills)
• Surgical Planning Preparation (Hard Skills)
• Clinical Imaging Interpretation (Hard Skills)
• Tolerance Calculations (Hard Skills)
• Template Management (Hard Skills)
• Case Tracking (Hard Skills)
• Team Collaboration (Soft Skills)
• Problem-Solving (Soft Skills)

Job Summary: 

• Provide support to design engineers and scientists to help meet internal and external customer requirements
• Follow strict industry standards, procedures, and processes to ensure that quality test data is generated
• Understand the problem to determine/suggest a required testing method
• Perform database queries, and analyze data in Excel spreadsheets or other forms
• Support evaluation of products or technologies by providing timely updates, summarizing test results, and writing test reports
• Work in a team environment to meet goals
• Coordinate testing to maximize quality and efficiency
• Address test-related issues (logistics, instrumentation, etc), create solutions, and provide test results to engineers within established deadlines
• Perform competitor benchmarking and analysis
• Support evaluation of products or technologies by using analysis tools
• Support the overall department by following department processes
• Communicate written/verbal information or data to other associates
• Obtain required training and skill development for position-specific skills as well as pursue personal development opportunities

Skills on Resume: 

• Design Support (Soft Skills)
• Quality Assurance (Hard Skills)
• Testing Methodology (Hard Skills)
• Data Analysis (Hard Skills)
• Test Reporting (Hard Skills)
• Team Collaboration (Soft Skills)
• Problem Resolution (Soft Skills)
• Benchmarking (Hard Skills)

Job Summary: 

• Select, prepare, and mix coating solutions according to formulas and specifications.
• Provide technical input to find creative ways to apply coatings on challenging and unusual applications.
• Keep work area clean and organized, including utilization of appropriate standards.
• Write coating procedures and/or other work instructions
• Prepare the surface of medical devices and apply coatings while maintaining daily schedules and meeting customer and quality requirements.
• Apply coatings on medical devices following specifications and customer requirements.
• Operate and maintain processing equipment including, but not limited to, coatings machine and friction tester.
• Perform analytical testing on coated devices to characterize the uniformity and performance of coatings.
• Write technical reports to document the findings.
• Complete and ensure adherence to application documents & process controls including SOP, work order instructions, process techniques, etc.
• Process incoming device and outgoing device shipments to support Application Development throughput
• Engage in continuous improvement objectives and seek opportunities to support personal and company growth.
• Use judgment of when to communicate and what to communicate with the Application Development team regarding assigned projects
• Provide cross-functional support and perform additional duties as assigned or required to meet organizational goals and objectives.

Skills on Resume: 

• Coating Solution Preparation (Hard Skills)
• Technical Problem Solving (Soft Skills)
• Work Area Organization (Soft Skills)
• Procedure Writing (Hard Skills)
• Surface Preparation (Hard Skills)
• Equipment Operation (Hard Skills)
• Analytical Testing (Hard Skills)
• Technical Reporting (Hard Skills)

Job Summary: 

• Builds and sets up special test fixtures and tests.
• Troubleshoot equipment and make simple repairs where the malfunction is easily identified.
• Takes measuring, compiles technical data, and draws simple plans, shapes, outlines, and diagrams.
• Performs mathematical calculations not requiring complicated engineering calculations but using developed formulas and tables.
• Constructs tools, jigs, or fixtures for assigned projects.
• Utilizes computers and other office machines in the performance of duties.
• Performs all operations according to prescribed safety principles.
• Keeps work area clean and maintains department equipment.
• Own team sample inventory management, including location of parts and characterization samples.
• Take ownership and responsibility for a mechanical testing laboratory, including things like lab safety inspections and 5S processes.
• Understand the functionality of a wide array of laboratory equipment and troubleshoot equipment when vital.
• Ensure recordkeeping through written/verbal summaries, and document laboratory testing results accurately and in an organized fashion.

Skills on Resume: 

• Test Fixture Setup (Hard Skills)
• Equipment Troubleshooting (Hard Skills)
• Technical Data Compilation (Hard Skills)
• Mathematical Calculations (Hard Skills)
• Tool Construction (Hard Skills)
• Computer Proficiency (Hard Skills)
• Safety Compliance (Soft Skills)
• Inventory Management (Soft Skills)

Job Summary: 

• Support and assist the development scientists with trials, new ingredient testing, shelf-life stability testing, and equipment operation
• Prepare and compound formulated products on the laboratory bench or in production for R&D testing and trials
• Conduct accurate record keeping and experiment execution with existing and new ingredients within new and existing product formulations
• Travel to other local development sites
• Diagnose problems and troubleshoot equipment
• Participate in non-medicated product cuttings, product evaluations, and creative brainstorming sessions and provide feedback on product appearance and form
• Operate pilot plant equipment and processing lines independently to allow the team to meet product commercialization timelines and schedules
• Prepare shelf-life studies and ensure testing is completed on a pre-determined amount of sample pulls during an established period
• Conduct pH, water activity, moisture analysis, viscosity, and other analytical benchtop tests to ensure product conformance
• Perform analytical sample preparation for benchtop product development testing and analysis
• Record and interpret technical data
• Prepare samples and product concepts for internal demonstrations, training, and brainstorming sessions
• Screen ingredients for function and cost-effectiveness
• Offer ingredient recommendations and ideas for product and process development

Skills on Resume: 

• Ingredient Testing (Hard Skills)
• Product Compounding (Hard Skills)
• Record Keeping (Hard Skills)
• Equipment Troubleshooting (Hard Skills)
• Pilot Plant Operation (Hard Skills)
• Analytical Testing (Hard Skills)
• Data Interpretation (Hard Skills)
• Ingredient Screening (Hard Skills)

Job Summary: 

• Formulation of adhesives and coatings – liquid, hotmelt, and solvent-based
• Perform standard laboratory testing to characterize polyurethane polymers and formulations
• Test adhesives for suitability of application to various substrates
• Prepare sample bonds between substrates and evaluate bond strength and reliability in a reliable, reproducible manner.
• Tabulate, plot, and interpret data, determine trends and recommend future experiments.
• Keep an up-to-date electronic laboratory notebook.
• Provide samples of adhesive products to internal and external customers to support business.
• Manage standard laboratory needs including equipment calibrations, ordering of materials, and overall cleanliness
• Maintain a safe laboratory and follow safe laboratory practices.
• Execute experiments with the support of the development team, based on project objectives
• Flexibility and ability to pivot on project needs and deliverables
• Meet project deadlines by working efficiently with a sense of urgency
• Maintaining proper sanitation for work areas and pilot plant areas
• Participate in establishing, improving, and adhering to and fulfilling policies, procedures, and reporting requirements

Skills on Resume: 

• Adhesive Formulation (Hard Skills)
• Testing (Hard Skills)
• Bond Evaluation (Hard Skills)
• Data Analysis (Hard Skills)
• Lab Notebook Management (Hard Skills)
• Project Management (Soft Skills)
• Safety Practices (Soft Skills)
• Flexibility (Soft Skills)

Job Summary: 

• Working closely with the automation and development scientists and engineers, senior development scientists
• Responsible for experiments that are designed and conducted in line with the overall product development strategy within Oxford Immunotec.
• Taking responsibility for the design and conduct of experiments supporting lab automation and product development goals.
• Operate as a scientist in support of running the ODL, ensuring that the Quality Management System, including, ISO 13485:2016, and ISO 17025:2005, is adhered to at all times and in all aspects of the job
• Ensure that work is completed to agreed timelines.
• Ensure that any likely delays or issues with a given project are communicated to their supervisor on time.
• With significant input from their supervisor, prioritizing workload to ensure key objectives agreed upon with the supervisor are met on time.
• Support organization, execution, and analysis of clinical trials, in collaboration with the Clinical Affairs team
• Represent OI at clinical sites outside of the UK for extended periods (minimum of 1 month).
• Perform duties in other departments, on an occasional basis to meet critical Company objectives.
• Ensure that projects are carried out following the Company Quality System and to the required Regulatory standards.
• Ensure that conclusions in written reports reflect the data presented and reports are of the highest quality.
• Communicate results to partners and actively provide ideas in a team environment, observe unusual results, and suggest possible root causes.
• Guide new products from the lab into production working closely with manufacturing and/or related areas.

Skills on Resume: 

• Experimental Design (Hard Skills)
• Quality Management Compliance (Hard Skills)
• Timeline Management (Soft Skills)
• Communication Skills (Soft Skills)
• Clinical Trial Support (Hard Skills)
• Regulatory Standards Adherence (Hard Skills)
• Data Reporting (Hard Skills)
• Cross-Department Collaboration (Soft Skills)

Job Summary: 

• Conduct product development laboratory duties, including testing and pilot trials
• Provide hands-on support and evaluate different materials and raw materials
• Evaluate laboratory and finished samples to progress development projects
• Carry out statistical analysis of laboratory results and present/document findings
• Record and document all testing and analysis in an accurate and timely manner into project planning and tracking databases
• Generate full factory costs where applicable
• Assist in laboratory work associated with the investigation of any technical service/customer complaints if needed
• Monitor laboratory consumables and replenish
• Maintain high standards of housekeeping within the laboratory and technical area
• Manage development plant trials, liaising with the production to ensure first-quality samples are produced
• Maintain all necessary development documentation, including COSHH
• Create product specifications, product data sheets, product information leaflets, and material safety data sheets for new products to support market introduction

Skills on Resume: 

• Product Development (Hard Skills)
• Material Evaluation (Hard Skills)
• Statistical Analysis (Hard Skills)
• Documentation Management (Hard Skills)
• Cost Generation (Hard Skills)
• Complaint Investigation (Soft Skills)
• Laboratory Monitoring (Soft Skills)
• Specification Creation (Hard Skills)

Job Summary: 

• Maintain complete ingredient and packaging inventory.
• Support sample requests under supervision and instruction by the product development team or manager
• Collect product samples in inventory
• Receipt and management of control samples
• Support culinary ideation sessions with customers including preparation, cooking, and presentation under instruction
• Prepare and/or package lab samples (i.e., fill and seal pouches, jars, etc.)
• Prepare and ship lab samples to customers and/or laboratories with local and nationwide couriers (i.e., FedEx, etc.)
• Record and maintain sample shipment logs for all outgoing and incoming samples
• Assist Product Developers and Managers in the preparation of samples. 
• Large batch sample preparation may be required.
• Support preparation and execution of in-house for trial and monitor 1st production to ensure scale up is successful
• Collect and maintain required finished product samples (i.e., sauces, dips, dressings, beverage syrups)
• Maintain lab cleanliness throughout the entire workday (i.e., loading and emptying the dishwasher, wiping counters, etc.)
• Organize, maintain, and clean the interior and exterior of the refrigerator and freezer with fresh and updated samples and ingredients.
• Rotate and maintain refrigerated and frozen samples

Skills on Resume: 

• Inventory Management (Hard Skills)
• Sample Collection (Hard Skills)
• Control Sample Management (Hard Skills)
• Culinary Support (Soft Skills)
• Sample Preparation (Hard Skills)
• Shipment Coordination (Hard Skills)
• Lab Cleanliness (Soft Skills)
• Refrigeration Organization (Hard Skills)

Job Summary: 

• Read and interpret assembly drawings, blueprints and build drawings
• Manufacturing support of processes unattainable by the manufacturing line.
• Develop standard product work procedures
• Responsible for conducting testing of products in conjunction with the Fenestration Lab
• Responsible for the production and quality of all non-standard materials and products
• Organize, maintain, and keep a clean work environment
• Assist with product development needs from benchtop prototype development, scale-up and launch.
• Assists in plant trials and start-ups by coordinating pre-ops with QA Technicians, sanitation of equipment and small wares, issuing product consumption forms, checking raw materials and packaging materials pulls, batching, making labels, recording trial results, managing inventory returns and finished goods, and helps analyze results.
• Manages R&D ingredient inventory by location, lot code, amount and expiration date
• Manages R&D lab product inventory, including ensuring all necessary equipment is available and in working order
• Assists with new item shelf-life testing
• Prepares customer samples for products in the development phase and ensures proper shipping and tracks delivery
• Keeps lab clean and organized. Follow all Good Manufacturing Practices (GMPs)
• Responsible for maintaining a food-safe work environment and in the event it is perceived that it is compromised, action is to be taken which includes stopping the process and notifying the production supervisor, assistant supervisor, or lead on duty

Skills on Resume: 

• Blueprint Interpretation (Hard Skills)
• Manufacturing Support (Hard Skills)
• Standard Procedure Development (Hard Skills)
• Product Testing (Hard Skills)
• Inventory Management (Hard Skills)
• Plant Trial Coordination (Hard Skills)
• GMP Compliance (Soft Skills)
• Sample Preparation (Hard Skills)