• Selects fabrication equipment and plans layout, assembly and welding procedures
• Bolts, clamps and tack-weld parts to secure in position for welding
• Sets up equipment and welds parts using Arc, Gas-Shielded Arc, or Gas Welding equipment
• Repairs products by dismantling, straightening, reshaping and reassembling parts
• Responsible for layout, fitting and welding fabricated, cast and forged components to assemble structural forms
• Maintains equipment and work area in a clean and orderly condition
• Carries out job requirements in accordance with established procedures and specifications
• Responsible for and have the authority to maintain and promote a safe working environment in accordance with the appropriate HSE procedure(s)
• Participates in actions that promote a safety and quality culture within NOV
• Complies with all NOV Company and Quality, Health, Safety Environmental polices and procedures
• Ensures compliance with the company’s overall objectives

Skills: Welding Equipment Setup, Layout Planning, Component Fitting, Tack Welding, Arc Welding, Gas Welding, Structural Fabrication, HSE Compliance

• Repair/ overhaul aero-engine components by benching, blasting, brazing, blending, polishing, cold working, TIG welding (preferred) or using other required mechanical skills
• Follow established procedures and guidelines to form a variety of simple, manual tasks that form part of a production process, manufacture products according to production specifications and schedules, volume, cost, and wastage targets, and quality standards
• Support and participate in the EH&S programs and activities within the company
• Report on all incidents (injuries, illnesses, near misses, spills, etc.), hazardous conditions, and emergencies to the supervisor
• Responsible for performing an assessment of the risk of activities, taking corrective and preventive actions
• Attend EH&S training programs and take personal responsibility for safety
• Comply with EH&S regulations/policies/programs/rules and use personal protective equipment (PPE)
• Participate in audits and inspections
• Improving the systems of production to generate continuing quality and productivity improvements with full accountability and responsibility
• Comply with the Company Code of Ethics

Skills: Aero Engine Repair, TIG Welding, Brazing Techniques, Media Blasting, Blending Finishing, Cold Working, EH&S Compliance, Risk Assessment

• Inspects the structural condition of equipment
• Removes and installs components and parts to make necessary repairs
• Reconditions or fabricates components or parts to the manufacturer’s specifications
• Determines reusability of parts in accordance with published guidelines
• Perform welding and repair of trash containers, trash compactors, and trash trucks in the fleet
• Maintain a clean, safe work area in compliance with Corporate and OSHA standards
• Perform all work in accordance with established safety procedures, documenting parts usage, and accounting for repair times

Skills: Equipment Inspection, Component Replacement, Parts Reconditioning, Component Fabrication, Repair Welding, Fleet Repair, OSHA Compliance, Repair Documentation

• Hand-weld in multiple positions to create parts using semi-automatic MIG welders and .052 solid wire
• Use robotic welding technology to enhance capabilities and efficiency
• Read and use blueprints to weld individual parts together to create a finished product
• Perform advanced welding techniques, all while using safety, quality and standard work
• Use jib and overhead cranes to manually position parts and products
• Work in one and two-person weld zones that are clean, well-ventilated, safe and equipped with the latest technologies
• Commit to being on time and reliable

Skills: Multi-Position MIG, Robotic Welding, Blueprint Reading, Advanced Welding, Crane Operation, Weld Assembly, Safety Compliance, Reliability

• Handling materials by hand, overhead crane, forklift, or other handling equipment
• Operate various types of automatic, semi-automatic, or manual welding equipment using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and submerged arc welding
• Perform welds in horizontal and vertical positions
• Perform MIG and Flux Core welds on structural steel
• Manufacturing, maintaining and repairing non-mechanical plant and equipment
• Ensuring the depot is clean and tidy at all times
• Ensuring that maintenance and inspection checks are carried out and reports are completed correctly on time and submitted

Skills: Material Handling, Crane Operation, Forklift Operation, GTAW Welding, GMAW Welding, Flux Core Welding, Structural Steel Welding, Maintenance Reporting

• Set up and adjust welding equipment, changing tips, adjusting temperature, feed rates, gas flow, type of gases, etc
• Welds metal parts together by applying proper welding procedures such as MIG, TIG, and resistance welding, within design specifications
• Welds in flat, horizontal, vertical, or overhead positions
• Verifies that standard specifications, custom, prototypes, etc., are welded per blueprint
• Inspects parts before starting the job and upon completion to verify material accuracy and quality
• Review the first piece production to confirm compliance by measuring, verifying weld quality and finish
• Verify dimensions and adjust to ensure proper fit and specified tolerances are maintained
• Remove burrs and sharp edges using portable grinders, a deburr machine and files
• Properly track and dispose of scrap and complete non-conforming tickets
• Directly responsible for all scrap/rework that is created by the cell
• Verify and complete job routing by signing the router sheet, submitting orders to be closed and parts to be posted to inventory
• Utilize a color-coded process to communicate part needs with the press shop and to accomplish timely production
• Troubleshoot work-related problems by applying knowledge and experience to identify the cause and take necessary steps to correct the situation and contact the supervisor
• Advises the supervisor of quality problems and the status of jobs

Skills: Welding Equipment Setup, MIG TIG Welding, Multi-Position Welding, Blueprint Verification, Weld Inspection, Tolerance Measurement, Deburring Finishing, Troubleshooting

• Sets up and operates different types of equipment used to weld metal cabinets and other related products
• Plans details of working procedure, tools, and material requirements
• Welds sheet metal using different welding positions (flat, overhead, vertical, etc.)
• Cleans and prepares surfaces (including sanding) to be welded
• Uses cutting torch equipment to dismantle assemblies and to cut material to size and shape
• Builds up worn or defective surfaces
• Keeps equipment and work area clean and orderly
• Works from blueprint, engineering specifications and production schedules

Skills: Equipment Operation, Work Procedure Planning, Sheet Metal Welding, Surface Preparation, Cutting Torch Use, Material Cutting, Surface Build Up, Blueprint Reading

• Conduct welding operations to build armoured steel welded assemblies in accordance with the Drawings, Quality Standards and Safety requirements
• Observe proper guidelines for handling armoured steel, post-weld heat treatment and checking of weld seams and dimensional accuracy
• Perform examinations and tests of welded assembly dimensions in accordance with the requirements and planning as set by the welding engineer or welding quality supervisor
• Execute welding instructions, welding sequence, work and procedural tests as specified in the production working method
• Read and interpret technical drawings of welded assemblies to determine specifications, tolerances and required materials to carry out the welding task
• Comply with the specifications of tests during and after welding for parameters and temperatures, weld seam preparation, root gouging, welding sequence, use and handling of filler metals, visual, dimensional and non-destructive tests
• Set up, operate, and maintain various welding equipment and tools (eg, Welding torch, grinder, overhead hoist, cutter, measuring tools) in a safe and efficient manner

Skills: Armoured Steel Welding, Drawing Reading, Weld Inspection, Dimensional Check, Heat Treatment, Weld Sequencing, NDT Testing, Tool Maintenance

• Assemble and TIG weld aerospace castings and details
• Use fixtures, tools, and gauges to produce aerospace parts meeting blueprint drawing tolerances
• Follow detailed work instructions
• Practice weld procedures per GE and Nadcap/AWS specifications
• Work in a team environment, participate in Action Workouts, and contribute to the LEAN Manufacturing workplace
• Weld and fabricate steel sub-assemblies and chassis from concept to finished product
• Independently use blueprints to fabricate items with various forms of weld symbols
• Squaring up and welding various geometric components
• Using the overhead crane and other mobile equipment

Skills: TIG Welding, Aerospace Casting Weld, Fixture Setup, Gauge Measurement, Work Instruction Follow, AWS Nadcap Compliance, Blueprint Reading, Overhead Crane Use

• Aligns and clamps work pieces together, using a rule, a square, or a template or sets up and places them in fixtures, jigs, or vise
• Cleans joints of work pieces, using a wire brush or by dipping them into a cleaning solution
• Selects torch tip, flux, and brazing alloy from data charts or work order
• Connects hoses from torch to regulator valves and cylinders of oxygen and specified fuel gas, acetylene or natural
• Turns valves to start the flow of gases, lights the flame, and adjusts the pressure and mixture of gases to obtain the desired color and size of flame
• Brushes flux onto the joint of work workpiece or dips the braze rod into flux to prevent oxidation of the metal
• Guides torch and rod along the joint or seam of the workpiece to heat to brazing temperature and melt the braze alloy to bond the workpieces together
• Examines the seam and re-brazes the defective joint

Skills: Workpiece Alignment, Joint Cleaning, Torch Setup, Gas Regulation, Flux Application, Brazing Operations, Seam Inspection, Joint Rework

• Experience using a variety of welding equipment and procedures (SMAW and GTAW)
• Must have AWS or ASME welder qualification (WPQ) for SMAW and GTAW
• Must have AWS or ASME welder qualification for Stainless steels and carbon steels
• Ability to receive and follow instructions and communicate with co-workers
• Ability to read labels, safety warnings, and guidelines
• Experience in welding using MIG and TIG, working with materials such as carbon steel, stainless steel and aluminum
• Ability to read drawings and customer prints 
• Ability to operate welding equipment
• Ability to read and follow written work instructions
• Familiarity with sheet metal measuring tools
• Ability to follow verbal directions

Qualifications: BA in Welding Technology with 5 years of Experience

• Experience in electric arc, gas-shielded arc, and gas welding
• Experience interpreting blueprints, drawings, manuals, and written work requests
• Experience bending, forming, connecting, soldering, silverbrazing materials of iron, brass, copper, steel and plastic piping, tubing, and fittings
• Must pass the 6G Qualification Test
• Must be able to use measurement tools including tape measure, calipers, and functional gauges
• Must be able to read and interpret blueprints
• Must read, write, and speak English
• Must have excellent communication skills

Qualifications: BA in Construction Technology with 2 years of Experience

• Must possess basic GTAW skills
• Working experience in TIG welding, Orbital Welding and Welding Lathe
• Working experience in MFG Standard 180
• Working experience in Weld Joint Cleaning 
• Working experience in Tungsten Grinding 
• Must be comfortable using a computer
• Must have experience with 5S, lean manufacturing
• Experience with Oracle ERP
• Experience reading assembly drawings
• Ability to perform physical functions
• Detail-oriented with good basic math skills
• Willingness to learn and follow directions

Qualifications: BS in Mechanical Engineering Technology with 6 years of Experience

• Able to create high-quality TIG welds and MIG welds
• Able to perform excellent vacuum leak-tight TIG welds on (aluminum)
• Ability to read and understand drawings and supporting documents
• Demonstrated ability to use precision instruments
• Experience operating bridge cranes and forklift trucks
• Able to perform special assignments as required by the supervisor
• Must be able to read and write to follow documentation assembly procedures and sign off on documentation 
• Welding experience and experience using mechanical assembly tools

Qualifications: BA in Metalworking Technology with 3 years of Experience

• Industry-related experience in a manufacturing environment
• Demonstrate product and process knowledge by applying it to newly learned techniques
• Able to select appropriate procedures, techniques, tools, and equipment
• Proficient in reading and understanding blueprints, route sheets, and test specifications
• Able to implement and effectively apply lean/continuous initiatives
• Possess effective interpersonal communication skills, as well as the ability to work in a team environment
• Able to interpret reports and use standard business software applications
• Able to use employee self-service to access online information and use specialized automated systems (i.e., PMR, TORS, e-mail)
• Ability to effectively demonstrate team member competencies and participate in goal setting, performance feedback, and self-development activities

Qualifications: BS in Mechatronics Engineering Technology with 5 years of Experience

• Must have an A-B-pressure welding certificate 
• Must be proficient at SMAW (stick welding), GMAW (MiG welding), and Carbon air arc gouging
• Must be able to work independently
• Problem-solving and the ability to troubleshoot 
• Understand and follow written and or verbal instructions
• Able to follow all safety policies and procedures
• Self-motivated, detail-oriented and dependable, with a good attendance record and a positive attitude
• Good initiative and the ability to achieve goals independently
• Experience with GMAW/FCAW
• Must have GTAW, SMAW and Sub-arc welding experience

Qualifications: BS in Electrical Engineering Technology with 4 years of Experience

• Experience in a Welding position/environment
• Ability to work to time frames, safely and in a tidy manner
• Ability to read and interpret technical drawings and plans
• Must be able to read, write and comprehend simple instructions
• Must be able to apply common sense understanding to carry out instructions in written, oral or diagram form
• Must be able to calculate and understand units of measure, including fractions and decimals
• Must know how to measure using a scale and a tape measure
• Must be able to wear safety PPE and use personal hand tools (adjustable wrenches, wire cutters, pliers, etc.)
• Must be able to obtain a government access badge
• Certification in shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW), flux shielded arc welding or informally as stick welding (a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld)
• Certification in flux-cored arc welding (FCAW or FCA) (a semi-automatic or automatic arc welding process)
• Certification in gas tungsten arc welding (GTAW) (an arc welding process that uses a non-consumable tungsten electrode to produce the weld)
• Certification in gas metal arc welding (GMAW) (a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing it to melt, and join)
• Certification in submerged arc welding (SAW) ( a common arc welding process that requires a continuously fed consumable solid or tubular (metal cored) electrode)

Qualifications: BS in Aerospace Manufacturing Engineering with 6 years of Experience

• Ability to read and follow route sheets/Blue Prints
• Must be proficient in welding with MIG, TIG and stick in materials such as 300 and 400 series stainless steels, Inconel and/or a variety of steels
• Must have experience in setting up and utilizing rotary positioners
• Experienced with weld procedures, including pre-heats and post-weld heat treatments
• Ability to read and interpret drawings using conventional tolerances as well as geometric tolerances
• Able to complete own set-ups, troubleshoot and solve problems with welding processes and results
• Able to define, evaluate and discuss quality workmanship related to welding
• Ability to read and interpret fabrication drawings
• Ability to read and differentiate part numbers, labels, and work instructions

Qualifications: BA in Metalworking Technology with 3 years of Experience

• Experience working in a welding position or equivalent of the two
• Strong math skills and can read micrometers
• Previous experience in welding, manufacturing, or other related fields
• Familiarity with welding tools and procedures
• Familiarity with engineering blueprints and schematics
• Ability to handle physical workload
• Must be able to set up and operate the coupling welder and tubesheet welder in the DFT line
• Must be able to qualify for necessary ASME Section VIII and IX Code Welding requirements, using Metallic Arc, Heli-Arc and Mig
• Must be code qualified on shop welding procedures for carbon steel, stainless steel, to carbon steel, stainless steel to stainless steel, to include PED directive or other mandated customer welder qualification requirements for the listed metals
• Must be able to demonstrate consistent quality in both weld and fit-up

Qualifications: BS in Construction Engineering Technology with 5 years of Experience

• Ability to read and comprehend simple instructions, short correspondence, and memos
• Ability to write simple correspondence
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals
• Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form
• Ability to deal with problems involving several concrete variables in standardized situations
• Ability to read micrometers or calipers
• Must have ASME Code Certification
• Must have TUV code certification
• Must have Level I Dye Pen certification
• Basic math, reading and computer skills
• Experience reading a tape measure
• Experience reading blueprints
• Experience in sheet metal manufacturing, farming or the military

Qualifications: BS in Materials Science with 6 years of Experience