LABORATORY TECHNICIAN COVER LETTER TEMPLATE

• Responsible for using test equipment and instrumentation for evaluating ink products during the ink manufacturing process and R&D projects
• Reporting data and results in written format as well as in electronic form
• Calculating and communicating routine batch adjustments
• Routine preventive maintenance and calibration(in-house or by arranging external services) of standard laboratory equipment
• Laboratory housekeeping, record keeping, filing, and storage/disposal of retained samples

Skills: Ink Testing, Data Reporting, Batch Adjustment, Equipment Calibration, Lab Maintenance, Record Keeping, Sample Storage, Preventive Maintenance

• Maintain knowledge of all testing procedures and permit requirements
• Verify that all products tested meet the needs of their intended customers
• Safe, timely, and accurate completion of all testing while adhering to all safety rules and regulations
• Maintenance of all testing data, papers, certificates of analysis and orders
• Ensure data integrity and cleanliness of the laboratory
• Provide technical support for sales, operations, product support and other groups
• Evaluate raw materials for process treating parameters
• Develop and evaluate improvements for test procedures
• Coordinate the evaluation and introduction of new test equipment
• Complete specialized testing
• Utilize troubleshooting skills in the operation and adjustment of laboratory testing equipment through verification of equipment compliance to parameters with known specifications and standards and to perform maintenance on equipment
• Employ problem-solving skills in determining the correct solution to challenges the laboratory or company may face, overcoming obstacles and making good decisions
• Correctly use various testing techniques to complete tasks
• Analyze statistical and test data to come to a logical solution on existing testing or process problems
• Complete inventory and batch calculations accurately for laboratory and plant products
• Accurately document laboratory testing results, personnel training, instrument testing certifications, the validation of laboratory tests and instruments and both internal and regulatory body permitting
• Effectively communicate test data clearly and understandably to both internal and external departments
• Promote team building by assisting other technicians and working on departmental projects
• Collaborate with both internal and external groups in joint efforts for continual improvement, quality control and problem solving
• Summarize information about testing challenges and results to make presentations to plant management
• Participate in housekeeping and safety audits within the 5S program
• Schedule and conduct monthly laboratory meetings
• Assist with the receipt and inspection of raw materials, ordering and stocking
• Maintenance of chemical and material inventory

Skills: Testing Procedures, Data Integrity, Technical Support, Raw Evaluation, Equipment Maintenance, Problem Solving, Test Analysis, Inventory Management

• Obtains training and understanding of all laboratory policies and procedures, and updates knowledge to fully comply with all laboratory, CLIA, HIPAA, NY DOH and Quality System Manual requirements.
• Competently perform all tests in a moderate complexity testing commercial lab environment and ability to train in high complexity testing
• Follows laboratory procedures for specimen handling and processing, test analysis, reporting, and maintaining records of patient results
• Understands and operates test systems proficiently with maximum efficiency and minimum waste
• Follows established policies and procedures for quality control performance and documentation
• Performs and documents scheduled and unscheduled preventative maintenance
• Identifying problems that may adversely affect test performance and immediately notifying the supervisor
• Understands and follows all safety, infection control, and OSHA Bloodborne Pathogen guidelines
• Actively supports organizational goals and changes as they occur
• Utilizes unstructured time constructively
• Communicates with laboratory staff and its clients to ensure quality patient care and maintain a service-oriented relationship with its customers
• Respects and maintains the confidentiality of information relative to clients and patients
• Strives to maintain a positive work environment
• Attends all in-services and relevant continuing education and staff department meetings
• Conduct must reflect the Company’s values and a commitment to the Code of Conduct, ethics and compliance program

Skills: Specimen Handling, Test Analysis, Quality Control, System Operation, Preventive Maintenance, Safety Compliance, Problem Identification, Patient Confidentiality

• Identify any issues that may adversely affect the quality of test results and report these to the appropriate representatives to ensure prompt resolution
• Prepare reagents and/or specimens for testing and process specimens via automated systems by the laboratory’s standard operating procedures (SOPs)
• Assist in the general upkeep of the laboratory
• Maintain laboratory supplies and inventory
• Review standard operating procedures (SOPs) and provide input 
• Interact with Customer Service for any issues related to sample processing within the lab
• Assist with quality control and quality assurance activities
• Maintain laboratory equipment and instruments according to SOPs
• Participate in continuing education
• Maintain strict standards of quality

Skills: Issue Identification, Specimen Processing, Lab Maintenance, Inventory Management, SOP Review, Customer Interaction, Quality Assurance, Equipment Maintenance

• Receive and accurately log each biological sample collected, understanding the importance of timed and accurate receipt and efficient sample handling and sample processing
• Follow detailed study-specific processing instructions or clinical flow sheets (for example, weigh and measure volume of urine, mix urine collections before aliquoting, add preservative, flash freeze sample, etc.)
• Record detailed information related to the task performed at the time the task is completed
• Understand and follow the process for safe and efficient sample centrifugation including temperature settings, speed settings, balancing and timing
• Use calibrated pipettes and/or bulb pipettes
• Work closely with peers performing setup tasks ahead of study schedules and during peak processing, and may move from one study to another
• Maintaining the study-specific instructions in the process
• Set up, clean, and maintain laboratory equipment
• Monitor refrigerator/freezer temperatures and record on applicable logs
• Adhere to OSHA and IATA regulations and guidelines
• Clean and maintain lab refrigerators and freezers
• Transport biological samples from the clinic floor to the laboratory for processing, following the study-specific transport guidelines
• Performs all tasks associated with biological sample transport 
• Prepare and maintain ice bath cups, ensure the Collection Time Control Form is filled out, etc.
• Work in different building locations and settings
• Remain familiar with clinical research and ICH and GCP guidelines
• Follows corporate policies and SOPs, site SOPs and Work Instructions designated for this role

Skills: Sample Logging, Sample Processing, Task Recording, Centrifuge Operation, Pipette Use, Equipment Maintenance, Temperature Monitoring, Sample Transport

• Collect environmental monitoring samples of machines and controlled environments
• Responsible for in-process and final product chemistry testing, LAL testing, and TOC testing
• Laboratory equipment cleaning and sanitizing, troubleshooting instrumentation errors, and media/reagent/chemical preparation
• Support on-demand production needs such as passivation, NaCl standards, post-media samples, etc.
• Review laboratory procedures for efficiency and effectiveness and update
• Maintain reports and records per cGMP
• Responsible for monitoring inventory, stocking materials, and preparing purchase requisitions for supplies 
• Identify and report safety violations and potential safety hazards to both safety members and supervisors
• Demonstrate professional responsibility by cooperating with other personnel to achieve department objectives and maintain good employee relations, interdepartmental objectives, and departmental goals and objectives
• Maintains compliance and principles of accepted employee conduct as identified in the Teleflex employee handbook and as specified in departmental goals and objectives

Skills: Environmental Sampling, LAL Testing, TOC Testing, cGMP Documentation, Equipment Sanitization, Instrument Troubleshooting, Reagent Preparation, Inventory Control

• Responsible for common laboratory operations including receiving packages, stocking consumables and supplies
• Organize logbooks and maintenance schedules for select equipment
• Provide support functions for the laboratory organization and waste management
• Prepare reagents and buffer solutions for experiments
• Procure animal tissues from various vendors twice a week
• Conduct tissue dissection procedures for in vitro studies
• Analysis of incoming samples using a variety of techniques according to in-house procedures
• Maintenance and calibration of laboratory equipment
• Assist in the maintenance of a high standard of GLP
• Review and implementation of lab procedures
• Record and report results promptly

Skills: Package Receiving, Supply Stocking, Logbook Management, Waste Management, Reagent Preparation, Tissue Dissection, Sample Analysis, GLP Compliance

• Perform routine and non­-routine testing on raw materials, intermediates and finished products
• Conduct maintenance and calibration of relevant laboratory instruments and equipment
• Manage the inventory of quality reference materials such as QC reagents and lab consumables
• Handle the administration work of the factory
• Maintain the cleanliness of glassware, i.e., beakers, pipettes, burettes, etc.
• Prepare daily QC report, relevant work instructions and validation protocol or reports
• Ensure documents and quality records are maintained for easy retrieval
• Manage operations towards timely support to meet factory analytical requests
• Responsible for product release
• Develop training to build quality and safety awareness

Skills: Routine QC Testing, Nonroutine Testing, Instrument Calibration, Inventory Management, Glassware Cleaning, QC Reporting, Document Control, Product Release

• Performs laboratory tests to determine chemical and physical characteristics or composition of solid, liquid, or gaseous materials for such purposes as quality control, process control, or product development
• Performs tasks on the daily schedule assigned to the shift
• Assists in resolving customer complaints
• Documents, communicates, and archives physical and analytical sample results
• Tests finished and raw material samples
• Participates in maintaining the sample retention area
• Engages in writing emails, reports, and other pertinent documents relative to performing the job
• Performs routine waste management duties
• Troubleshoot and perform minor maintenance on laboratory equipment
• Promotes a safe workplace environment and is accountable for personal safety as well as the safety of coworkers
• Utilizes all material handling equipment safely and efficiently, performs all required safety checks and communicates the need for repairs or maintenance

Skills: Quality Control Testing, Material Composition Analysis, Sample Documentation, Sample Retention, Customer Complaint Support, Waste Management, Equipment Troubleshooting, Safety Compliance

• Reports incidents, defective materials, or questionable conditions to the Supervisor
• Attends and participates in safety huddles, mandatory safety stand-down meetings, and ongoing training sessions
• Ensures all documentation produced complies with company and customer standards, including meeting the Data Integrity guidelines
• Contributes to audit readiness and participates in quality, customer, and regulatory audits
• Makes and tests hand blends
• Engages in writing emails, reports, and other pertinent documents relative to performing the job
• Uses technology, software, and hardware to write reports and enter data
• Maintains a clean and safe work area
• Utilizes all material handling equipment safely and efficiently, performs all required safety checks and communicates the need for repairs or maintenance
• Reports incidents, defective materials or questionable conditions to the Supervisor
• Attends and participates in safety huddles, mandatory safety stand-down meetings, and ongoing training sessions

Skills: Incident Reporting, Data Integrity, Audit Readiness, Hand Blend Testing, Technical Reporting, Data Entry, Material Handling, Workplace Safety

• Working with the R&D team, developing innovative new products
• Examine new and existing materials, including raw materials, by performing various tests
• Perform appropriate testing to assess internal and external properties of the products (chemical composition, particle size, density, moisture, etc.)
• Use different equipment such as X-ray fluorescence (XRF), X-ray diffraction (XRD), Thermo Gravimetric Analyser (TGA), FTIR, centrifuge, agitators, Leco carbon analysers and other lab equipment
• Analyse and interpret test results, compiling technical reports including critical analysis of results
• Continuous improvement of the chemical laboratory facility and make suggestions for any equipment upgrades
• Conducting technical experiments and projects
• Leading and participating in multi-disciplinary teams
• Working with quality systems or providing reports to governmental or regulatory agencies
• Developing hands-on and in-depth technical expertise
• Working in a fast-paced, results-oriented team environment to assist in developing new technologies to provide solutions to customers' needs

Skills: Product Development, Material Testing, Instrument Analysis, XRF XRD Testing, TGA FTIR Analysis, Data Interpretation, Technical Reporting, Lab Continuous Improvement

• Conducts product quality control and specification compliance testing and may train others in laboratory testing methods
• Enters lab results in proper databases and communicates results to the assigned area’s management and other personnel to direct formulation adjustments
• Ensures the work area is kept clean and organized
• Conducts calibration and standardization of testing instruments and ancillary test equipment
• Executes required assigned area’s Health, Safety and Environmental programs and initiatives
• Conduct activities related to the laboratory operation (Quality samples from the quarry to the finished product)
• Provide the highest standards in sample preparation, sample analysis, and safety and health
• Assist in the development of new methods to improve lab efficiency
• Communicate with other team members and with other departments
• Assist with environmental testing, reporting, and compliance

Skills: Quality Control Testing, Spec Compliance, Results Data Entry, Instrument Calibration, Sample Preparation, HSE Compliance, Method Development, Environmental Testing

• Conducting testing of soil grading, Atterberg limits, compaction, CBR and routine field testing
• Assisting with the maintenance, calibration and setup of equipment for use in testing in line with NATA standards
• Operating testing equipment, e.g., nuclear densometer gauge, compaction equipment
• Providing support with shipping, receiving, logging, handling, storage and disposal of samples
• Undertaking classification and testing of samples for analysis with senior review
• Undertaking basic calculations and data entry for reporting in line with NATA standards
• Liaising with internal and external clients, with a focus on delivering against project deadlines
• Displaying a safety-first attitude and identifying and reporting near misses and incidents in the HSE learning database

Skills: Soil Compaction Testing, Atterberg Limits, CBR Testing, Equipment Calibration, Sample Handling, Data Entry, Client Coordination, HSE Incident Reporting

• Adhere to applicable regulations, policies and SHE compliance
• Assist engineers in executing DOE to generate meaningful data for customers
• Troubleshoot problems with equipment and adhesive products
• Calibrate and maintain equipment to ensure optimal lab capability performance
• Installation of new equipment
• Liase with the third-party vendor in ordering consumables
• Maintain an inventory of chemical storage
• Liase with the chemical disposal company on waste disposal collection

Skills: SHE Compliance, DOE Support, Equipment Troubleshooting, Equipment Calibration, Equipment Installation, Vendor Coordination, Chemical Inventory, Waste Disposal Coordination

• Accountable for personal safety, the safety of co-workers and promoting a safe work environment
• Responsible for carrying out all work activities in compliance with company, federal and state regulations
• Operate polymer processing equipment in accordance with LyondellBasell Standard Operating Procedures and Site/Corporate Safety policies
• Perform process setup for molding machines to improve machine efficiency and reduce scrap in an accurate and timely manner
• Perform routine maintenance, safety and accuracy checks on assigned equipment
• Tests the compressive strength of cylindrical specimens
• Operates and maintains laboratory equipment/supplies
• Test steel samples
• Maintains detailed documentation and data of test results
• Tests soils, aggregates, and asphalt samples in accordance with applicable standards and specifications

Skills: Safety Compliance, Polymer Processing, Process Setup, Routine Maintenance, Compressive Strength Testing, Steel Testing, Construction Materials Testing, Test Documentation

• Collect samples and conduct quality control tests within the precise standards and specifications established by the company, with accurate results
• Conduct in-depth problem solving, detailed data and trend analysis, and troubleshooting associated with aggregate material performance
• Make inspection records, and prepare required documents with test results to be presented to production personnel and quality control management
• Perform lab equipment monitoring and first-level lab equipment maintenance
• Examine laboratory samples to determine their physical and chemical properties
• Use a variety of instruments and calculations to determine conformity
• Periodic correlative analysis of process instrumentation (% of solids, viscosity, PSD, etc.) to guarantee production continuity and the specific product quality
• Collaboration with the process engineering department regarding the optimization of the plant production process
• Use of the  advanced analytics  system supplied for predictive and real-time analysis of the process data to automate the production steps (Industry 4.0)
• Covers specific tasks related sustainability of Continuous Improvement on site (I-Cube, Iso 9001)

Skills: Quality Control Sampling, Root Cause Analysis, Trend Analysis, Equipment Maintenance, Physical Chemical Testing, Instrument Calculations, Process Optimization, Continuous Improvement

• Maintaining regular and punctual attendance according to shift times or a pre-arranged work schedule
• Follow all policies, procedures, and work instructions
• Wear and maintain proper personal equipment (PPE)
• Perform daily collect samples of chemicals and solutions
• Perform process control and solution control testing and monitoring, and recognize trends in data
• Read, comprehend and apply customer specification requirements for chemical and solutions control
• Document and maintain laboratory records
• Process solution formulation, neutralization, and disposal
• Operate and standardize laboratory equipment
• Maintain a clean and sterile work area, equipment, and lab ware
• Performs calibration verification and standardization of the test instruments and/or equipment
• Orders and inventories materials/chemicals to maintain necessary supplies

Skills: Sample Collection, Process Control Testing, Trend Monitoring, Spec Compliance, Lab Documentation, Solution Neutralization, Equipment Standardization, Chemical Inventory

• Prepare samples for analysis
• Prepare reagents for lab use and/or shipment
• Determining the volume of samples
• Cleaning of laboratory glassware
• Maintaining clean laboratory areas
• Maintaining organized records of sample preparation and analysis
• Courier supplies to and/or samples from client sites
• Overhead projects designed to improve the efficiency of, or the accuracy of analyses
• Assisting the Group Leaders and analysts in acquiring and inventorying consumables, chemicals, and parts for instrumentation
• Safely dispose of laboratory waste following prescribed procedures
• Comply with Enthalpy’s Quality Assurance Program and other policies
• Comply with Enthalpy’s Health and Safety Plan

Skills: Sample Preparation, Reagent Preparation, Sample Volume Measurement, Glassware Cleaning, Recordkeeping, Courier Coordination, Inventory Support, Waste Disposal

• Read, understand, and follow written Standard Operating Procedures
• Correctly identify specimens scheduled for analysis and assemble batches 
• Pour or quantitatively pipette biological specimens and standards in varying volumes
• Prepare and/or extract analytes of interest for subsequent instrumental analysis
• Interface with analytical instruments to schedule sample acquisition
• Maintain proper and adequate Chain of Custody batch documentation
• Communication with supervisors and prompt escalation of emerging challenges
• Maintain and promote a safe, healthy environment for self and co-workers

Skills: SOP Adherence, Specimen Verification, Precise Pipetting, Analyte Extraction, Instrument Scheduling, Custody Documentation, Issue Escalation, Lab Safety

• Conduct testing in accordance with standard procedures using various electrical, material, and mechanical test methods and instruments
• Follow test plans with limited oversight from the Sustaining manager or engineer
• Acquire materials from inventory and assemble test samples and prototypes
• Provide laboratory support to Operations, Approvals, Supply Chain, Product Management, and New Product Development
• Perform standards and approvals testing and obtain certification through witness testing
• Generate summaries of data collected, including graphical and statistical analysis, for work related to assignments
• Provide feedback to engineers and the project team
• Train on new test methods
• Propose the most appropriate solution among a set of learned possible choices
• Exercise judgment in line with established processes and standards
• Follow set guidelines and procedures with some flexibility and creativity without sacrificing safety or quality standards
• Manage, calibrate, and maintain the inspection, measurement, and test equipment and laboratory spaces
• Troubleshoot electrical and mechanical testing instrumentation

Skills: Standards Testing, Prototype Assembly, Data Analysis, Certification Support, Cross-Functional Support, Equipment Calibration, Instrument Troubleshooting, Test Method Training

• Setting up and operating a variety of simple to moderately complex laboratory equipment and instruments, within predefined parameters while working across multiple labs
• Conducting chemical and physical laboratory tests to make qualitative and quantitative material analyses
• Working with a high level of attention to detail and maintaining necessary records, accepting responsibility for all test results
• Assisting with the inventory control of chemicals and apparatuses
• Troubleshooting analytical processes with guidance
• Completing (extensive) initial and ongoing on-the-job training 
• Managing on-site customer requests
• Manage multiple tasks and projects
• Effectively handle customer relations and communication

Skills: Equipment Operation, Chemical Physical Testing, Quantitative Analysis, Recordkeeping Accuracy, Chemical Inventory, Process Troubleshooting, Customer Support, Multi Task Management

• Sample and analyze essential materials for conformance with specifications using standard operating or non-routine procedures
• Make up and standardize chemical solutions used in laboratory, concentrations or formulations required in special tests
• Sample and test materials for chemical and physical properties
• Calibrate laboratory equipment such as thermometers, hydrometers, chromatographs viscometers, differential calorimeters, introns, extruders, etc.
• Assist in calibrating experimental equipment
• Test new methods, equipment, or procedures and make recommendations based on observations, analyses, and evaluation of test data
• Compile and issue routine or special reports
• Produce experimental products with specific characteristics, such as color, gloss, opacity, flammability, or light absorption
• Perform air/fume test for both safety and environmental control
• Prepare raw materials for a semiworks (pilot scale) operation
• Conduct routine material manipulations, including saw cutting, sanding, and milling operations

Skills: Material Conformance Testing, Solution Standardization, Equipment Calibration, Method Development, Technical Reporting, Experimental Product Testing, Air Fume Testing, Pilot Scale Support

• Maintain a safe work environment
• Perform work in accTesting raw materials, finished products, and non-routine samples, using QCordance with daily production schedules to fulfill work orders and special requests
• Follow batch records to perform solution preparation while documenting the production process
• Utilize basic mathematical skills to perform required calculations and provide accurate data documentation
• Maintain the cleanliness of the Solutions Lab
• Lead/facilitate safety and quality-related Gemba walks
• Maintain inventory of chemicals, raw materials and laboratory supplies in the Solutions Lab
• Support the Antibody department by ensuring all Kanban items are sufficiently stocked promptly
• Independently plan and schedule production for buffer solutions based on requests from R&D, Antibody and other departments
• Assist adjacent groups after daily duties have been achieved
• Learn and follow all department SOPs, guidelines, and procedures
• Perform daily updates in multiple database systems
• Share best practices with other employees in the areas of safety, quality and productivity
• Proactively addresses ergonomic concerns in the work area
• Escalate any safety, quality, or equipment-related issues promptly
• Solves basic problems utilizing experience and knowledge

Skills: QC Sample Testing, Buffer Preparation, Batch Documentation, Lab Calculations, Chemical Inventory, Kanban Stocking, Safety Gemba Walks, Database Updates

• Ensure all routine and urgent analysis is performed and reported according to customer expectations
• Communicate with customers regarding queries
• Maintain all equipment required for operational efficiency
• Review all procedures with the Chemistry supervisor and implement improvements as indicated and confirmed with the Nutritional and Environmental Manager in line with the QMS
• Continuously be aware of opportunities for improvement in the laboratories and drive innovation
• Promote a positive health and safety culture by ensuring safe working practices and continuous improvement
• Comply with all ISO 17025 accreditation requirements and the Quality Management System
• Perform raw material testing
• Monitor and maintain adequate stock levels of laboratory consumables
• Ensure SOPs are followed and laboratory testing documents are completed
• Undertake microbiological testing, including preparation of media, swabbing, and culturing

Skills: Customer Communication, Routine Urgent Analysis, Equipment Maintenance, ISO 17025 Compliance, QMS Improvement, Raw Material Testing, Inventory Monitoring, Microbiological Testing

• Support laboratory operations through general maintenance of laboratory and supply storage areas, equipment, instruments, and supplies
• Semi-automated extraction of patient specimens, automated transfer of extracted samples to PCR
• Retrieve samples from Sample Control for analysis
• Perform sample preparation including aliquot samples, spiking and tracing samples, preparing reagents, bottling samples, preparing concentrations, separation, sonication, and liquid rack setup
• Resolve discrepancies and anomalies to ensure samples are properly labeled
• Prepare general lab paperwork such as recording analysis results, tracking samples, bench sheets, and lab logbooks
• Wash lab glassware to prepare for the next day’s samples
• Stock lab supplies

Skills: Lab Maintenance, Sample Retrieval, Specimen Extraction, PCR Transfer, Sample Preparation, Label Verification, Lab Documentation, Supply Stocking

• Responsible for weighing, packaging and labeling samples for shipment per batch record instructions
• Dissolution and dilution of samples for ICP-MS analysis following standard protocols
• Input data and maintain an MS Excel-based database
• Completes all required documentation neatly, accurately, and in accordance with GMP
• Handles samples per GMP and Safety requirements
• Uses equipment such as pipettors, balances, and pH meters
• Promotes a safe work environment
• Follow through on assigned responsibilities and be able to function under minimal supervision
• Responsible for promoting a positive team environment through good communication and team engagement

Skills: Sample Packaging, Sample Dilution, ICP MS Prep, GMP Documentation, Excel Data Entry, Instrument Handling, Safety Compliance, Team Communication

• Provides operational support for IVTS activities including Aseptic Technique, including aseptic technique, cell culture, light and fluorescent microscopy and reagent preparation
• Performs assays and proper documentation
• Organizes laboratory supplies, media and reagent shipments
• Performs daily monitoring and cleaning of equipment and applicable facilities
• Prepares documentation of in-house media and reagents
• Works on routine assignments per written procedures, where the ability to recognize deviation from accepted practice is required
• Normally receives minimal instructions on routine work and detailed instructions on new assignments
• Works under close supervision from a supervisor or senior personnel
• Contributes to the overall operations and to the achievement of departmental goals
• Perform job-specific tasks in compliance with applicable Regulations, International Standards, and WuXi AppTec Policies and Standard Operating Procedures

Skills: Aseptic Technique, Cell Culture, Microscopy, Reagent Preparation, Assay Documentation, Media Shipping, Equipment Cleaning, SOP Compliance

• Incoming material Inspection, finished goods inspection, work instructions development, laboratory management, documentation and record keeping, calibration of lab equipment's
• Carrying out physical-chemical and application tests according to established methods
• Monitoring control plans using instruments and laboratory equipment of a certain complexity
• Use of computer systems for the introduction of results and databases, as well as digital tools (SAP, iPads, apps, etc.)
• Technical support activities in process improvements and/or in the development of new products as well as in tests (production and packaging) carried out in the plant
• Realization of non-conformities and blockages process including all the notification process to the supervisor about quality and equipment problems, revision of the "retain samples" and realization of quality reports
• Participates in the calibration of laboratory equipment, as well as the validation of analytical methods
• Primarily assists in high-volume sample preparation activities, data entry, and quantitative analyses of fruits and vegetables
• Weighs and extracts samples for analytical procedures
• Relies on instructions and pre-established guidelines to perform all activities
• Perform additional laboratory technical and housekeeping tasks

Skills: Incoming Inspection, Physicochemical Testing, Sample Preparation, Data Entry, Equipment Calibration, Method Validation, Document Control, Nonconformance Reporting

• Assisting laboratory personnel with experiments by testing and evaluating new materials and products based on research
• Assist in the development and modification of test methods, test method validation, and/or the development of test fixtures for new products and processes
• Performing statistical data analysis, interpreting and documenting experimental test results
• Test or make visual observations on product samples from competitors
• Communicates test results to the appropriate requester promptly
• Maintaining test equipment and system software
• Performing equipment calibrations at regular intervals and verifying that equipment operates within set tolerances
• Managing Controlled Temperature and Humidity (CTH) room conditions, and ordering testing supplies
• Training engineers, technicians, and contract workers on proper test methods and equipment procedures
• Maintaining accurate technical documentation in electronic technical notebooks for information transfer

Skills: Material Evaluation, Method Development, Method Validation, Statistical Analysis, Competitor Testing, Equipment Calibration, CTH Room Monitoring, Technical Documentation

• Clean and dry laboratory glassware
• Order internal and external supplies and lab consumables
• Proactively manage consumable stock levels
• Monitor the temperatures of storage areas
• Dispose of laboratory waste according to proper procedures
• General housekeeping to maintain the cleanliness and tidiness of the laboratory area
• Assist with and supervise sample receipt, storage and disposal
• Prepare and process samples for designated studies
• Analyse samples for assigned studies
• Set up analytical runs on appropriate instrumentation
• Increase theoretical knowledge of analytical techniques by using CHROMacademy
• Assist in the checking of analytical data
• Clean and maintain allocated work areas and equipment in line with departmental procedures
• Accept responsibility for the condition and maintenance of allocated equipment

Skills: Glassware Cleaning, Supply Ordering, Inventory Control, Temperature Monitoring, Waste Disposal, Sample Receiving, Sample Preparation, Analytical Instrument Runs

• Working safely is an expectation of work
• Continuous commitment and attention to safety in the laboratory working environment
• Follows all safety procedures and protocols in the labs and on the Granville site
• Continuously strives to improve safety standards to ensure all team members remain safe
• Follows all lock-tag-try procedures
• Wears appropriate personal protective equipment at all times
• Promptly reports all safety incidents or concerns to the appropriate resource
• Work to drive a zero-injury, zero-defect, and zero-loss culture
• Actively participates in TPM deployment throughout the lab spaces
• Preparing samples for various analyses

Skills: Safety Compliance, Lockout Tagout, PPE Usage, Incident Reporting, TPM Participation, Safety Improvement, Zero Injury Culture, Sample Preparation

• Working with various glass and raw material samples for the Composites and Insulation businesses
• Working in a hot environment to melt glass for testing
• Work with a variety of equipment to mix and melt glasses depending on project objectives
• Work with cutting and grinding equipment to prep refractory brick samples
• Working in a hot environment to test refractory samples
• Collaborates and Fosters Teamwork
• Collaborate with other team members to ensure lab requests are complete promptly
• Assist in high-priority workstreams as a team
• Collaborate with internal customers to promote team-based problem-solving
• Actively contribute to team troubleshooting to ensure the fulfillment of lab goals and objectives

Skills: Glass Testing, Sample Melting, Refractory Prep, Cutting, Heat Testing, Team Collaboration, Customer Support, Troubleshooting

• Conduct experimental work such as the application and testing of coatings
• Ensures all testing is performed as defined
• Ensures all Lab equipment is accurately working and calibrated
• Contributes to achieving team goals by communicating ideas, suggestions, and assistance
• Identifying and communicating ways to save time, effort, and resources
• Participate in all safety protocols and 6S initiatives and help to maintain the laboratory equipment and inventories
• Keep a clean work environment, including the execution of routine upkeep activities in support of the entire lab
• Aligns with Health, Safety, and Environmental requirements at all times

Skills: Coating Application, Coating Testing, Equipment Calibration, Continuous Improvement, 6S Compliance, Inventory Support, Lab Housekeeping, HSE Compliance

• Perform routine QA tasks as outlined in the associated procedures and work instructions
• Finished product and raw material testing
• Input QA data into the SAP system as part of a positive release
• Isolation of non-conforming stock 
• Maintains records of RM and FG test results
• Maintains retention samples and batch documentation storage
• Ensure that Laboratory equipment and area cleanliness are maintained
• Daily calibration of equipment before testing
• Manage laboratory consumables stock (e.g., Sample cups, spoons, test strips, etc.)
• Raise a Non-conformance for out-of-spec product or raw material
• Attend and participate in regular quality and site meetings
• Support with process quality and quality system duties as directed

Skills: QA Testing, SAP Data Entry, Nonconformance Handling, Records Management, Retention Samples, Equipment Calibration, Lab Cleanliness, Consumables Stocking

• Produce plates and tubes with small molecule solutions on automated robotic systems for compound logistics (e.g., New Library Additions and internal Refill Processes)
• Handle sample data along the production process
• Troubleshoot the process and ensure high-quality delivery of material
• Support daily business activities in compound logistics (weigh-outs, sample preparation), in addition to previous tasks
• Assist Chemists with projects and experiments
• Preparing reagents and solutions, calibrating pipettes, and performing other related activities in support of experiments
• Ensure documents, reports, methods and any other relevant information related to particular projects and experiments are organized and archived promptly
• Monitoring laboratory inventory and ordering necessary supplies within established levels
• Perform low complexity testing

Skills: Robotic Sample Plating, Compound Logistics, Sample Data Handling, Process Troubleshooting, Sample Preparation, Reagent Preparation, Document Archiving, Inventory Ordering

• Experience with aseptic technique, food microbiology, or other culture-based microbiology lab experience
• Strong, relevant qualitative and quantitative skills
• Excellent attention to detail, high-level organizational skills, and the ability to multitask
• Must possess strong communication skills (verbal/written) to document test results and exchange test information with supervisors and other departments
• Strong manual dexterity and the ability to distinguish colors
• Strong knowledge of LabWare LIMS (Laboratory Information Management System)

Qualifications: BA in Biochemistry with 2 years of Experience

• Experience in a hardware testing environment
• Capable of prioritizing tasks to meet goals and ensure product quality
• Strong lab skills for soldering/instrumenting systems for test or debug
• Experience working with validation engineers setting up test benches
• Ability to work independently and as part of a team
• Shown computer skills, able to run diagnostic software and test scripts
• Strong interpersonal, written, and verbal communication skills

Qualifications: BA in Laboratory Science with 3 years of Experience

• Excellent organizational skills and attention to detail
• Excellent documentation skills
• Must have good interpersonal skills and the ability to perform as a team member
• Experience in a cleanroom environment
• Knowledge of Microsoft Office and other relevant computer programs
• Ability to perform mathematical calculations (add, subtract, multiply, divide) in different units of measurement
• Ability to use concepts such as fractions, percentages, and ratios
• Strong attention to detail
• Ability to write correspondence and reports
• Excellent organizational skills
• Ability to perform physically demanding work such as moving and lifting equipment, standing for long periods, etc.

Qualifications: BA in Microbiology with 4 years of Experience

• Experience operating in a NATA / DAWR approved Microbiology laboratory and/or Tertiary qualifications (Including TAFE certificates/diplomas)
• Willingness to obtain NATA signatory
• Extremely high attention to detail
• Previous experience with PCR methods, ie, GDS / BAX and confirmation of pathogens, along with reading of microbial results
• Previous experience in a similar environment (meat processing/food manufacturing)
• Ability to work independently and as part of a team, self-motivation, adaptability and positive attitude
• Ability to communicate effectively, both orally and in written form, with all levels of the organization
• Team player with strong analytical and organizational skills to prioritize multiple tasks to achieve deadlines
• Competency in the Microsoft Office product suite 

Qualifications: BA in Environmental Science with 3 years of Experience

• Must be a fluent English speaker
• Detail-oriented, proactive and able to multitask
• Must have clear and constructive communication
• Excellent communication skills and the ability to work under pressure and prioritize tasks
• Ability to work independently in a very dynamic and challenging environment
• Able to work under pressure with peak activities and strong requirements for accuracy, completeness and speed

Qualifications: BA in Food Science with 2 years of Experience

• Experience in a dental laboratory working with removables, TMJ or sleep apnea appliances
• Working experience in Leadership or management 
• Experience producing and fitting ortho, TMJ or sleep apnea appliances
• Understanding of removable prosthetics 
• Strong knowledge of human/oral anatomy
• Previous experience with food quality specifications, process control monitoring and positive release documentation or similar experience with strict adherence to protocol 
• Advanced quality/food safety training and/or certifications
• Working understanding of food manufacturing acronyms (SQF, QA/QC, CQP, QAP, HACCP, SOP,5S, GMP, etc.)
• Strong computer and business skills (SAP, Microsoft Office products, email, copy, scanning)
• Strong verbal and written communication skills
• Good visual acuity with the ability to see color

Qualifications: BS in Dental Technology with 5 years of Experience

• Effective use of laboratory instruments and their maintenance
• Knowledge of biomedical and biotechnological techniques and methodologies
• Working knowledge of tissue culture and basic molecular biology (including microscopy, PCR, and immunofluorescence)
• Strong organizational and communication skills
• Must be able to complete all post-offer, pre-employment contingencies
• Basic computer skills
• Previous military service experience within a technical specialty
• Should be mechanically inclined, a self-motivator, and eager to learn technical and processes in the oil and gas industry
• Working both as a team member and independently
• Ability to enter data accurately and maintain various logs

Qualifications: BS in Dental Laboratory Technology with 3 years of Experience

• Able to obtain and maintain state marijuana work credentials
• Prior experience in a manufacturing laboratory
• Ability to use standard office equipment, computer equipment and software including word processing, database management, spreadsheet applications and email
• Familiarity with basic scientific principles and laboratory terminology
• Basic math skills
• Familiarity with OSHA guidelines for dealing with hazardous chemicals
• Ability to establish and maintain effective working relationships with all employees
• Highly detail-oriented and organized
• Excellent written and verbal communication skills
• Demonstrate responsibility, accountability, and dependability toward assigned tasks and duties
• Strong ethics and sound judgment
• Must be able to successfully pass a thorough internal and external background check

Qualifications: BS in Biomedical Sciences with 4 years of Experience

• Knowledge of GxP principles
• Excellent customer service focus and ability to work collaboratively
• Clear and concise written and spoken communication skills
• Excellent problem-solving capabilities and ability to make clear decisions and good organisational skills
• Experience in project management and lean process skills
• Ability to collaborate with other support teams
• Experience working in a laboratory environment
• Experience working with health and safety procedures
• Knowledge of the use of analytical equipment 
• Able to be a good team worker, demonstrating loyalty and commitment to the team members
• Ability to work independently
• Self-motivated, energetic, dependable, with a clear attention to detail

Qualifications: BS in Chemistry with 5 years of Experience

• Experience working in an industrial laboratory or warehouse environment
• Proficient with Microsoft Office (Excel, Word) and Microsoft Outlook
• Comfortable switching between desk to hands-on lab work interchangeably
• Ability to communicate effectively with external and internal customers
• Proven analytical skills and highly comfortable with numbers
• Experience in data mining manipulation using programs such as SQL, Redshift
• Previous experience with 3D Printing
• Previous experience with testing in an industrial laboratory environment or in quality control
• Previous experience with ISTA Test Methods
• Previous experience with Packaging Design and Failure Analysis
• Previous experience with CAD Tools, particularly Artios and Solidworks
• Previous experience in a client-facing role

Qualifications: BS in Quality Assurance with 6 years of Experience

• Prior experience with earthworks/concrete construction and an interest in construction technology
• Knowledge of Canadian Standards Association (CSA) and American Society for Testing and Materials (ASTM) testing methods 
• Strong communication skills and leadership capabilities
• Ability to execute Standard Operating Procedures (SOPs) in accordance with current Good Manufacturing Practices (cGMP) requirements including Good Documentation Practices (GDP)
• Ability to monitor and verify quality in accordance with SOPs
• Ability to perform general maintenance
• Ability to work in and maintain a sterile environment, including cleaning of equipment and facility
• Ability to adapt to process improvements
• Ability to learn and utilize technology to support manufacturing processes
• Ability to manage inventory

Qualifications: BS in Biotechnology with 3 years of Experience

• Knowledge on Quality System (QS 9000 / IATF-16949) 
• Through an understanding of electronics principles
• Basic programming knowledge (C++, LabVIEW)
• Proficient in online Google Docs and Google Drive
• Able to be autonomous and to learn quickly
• Ability to follow highly complex directions
• Problem-solving and troubleshooting skills
• Possess excellent organizational, written and oral communication skills
• Experience in an analytical chemistry testing laboratory performing wet chemistry testing and instrumentation including HPLC, GC, AA and UV/Vis 
• Working familiarity with Word and Excel 

Qualifications: BS in Microbiology with 4 years of Experience

• Material management experience in the pharmaceutical industry 
• Excellent computer skills 
• Knowledge of Microsoft Word, Excel, and Outlook
• Experienced with computer inventory control systems
• Strong verbal and written communication skills
• Knowledge of GxP requirements
• High degree of personal initiative and ability to work independently
• Strong team player with experience in a high-quality customer service operation
• Ability to adjust focus, with or without corrective lenses

Qualifications: BS in Cell Biology with 2 years of Experience

• Experience in a clinical lab setting
• Experience with immunochemistry analyzers for the analysis of forensic specimens in support of drug abuse testing
• Experience within mechanical engineering and workshop equipment
• Able to come up with good solutions to practical challenges in the laboratory
• Flexible mindset and an interest in taking initiative
• Fluency in Norwegian and English languages, both verbal and written
• Ability to perform basic algebraic math skills
• Computer skills (Microsoft Office Products)
• Strong customer service and communication skills
• Strong safety background/orientation
• Ability to work independently as well as with other team members

Qualifications: BS in Dental Technology with 5 years of Experience

• Experience in Food Manufacturing with Food Science / Technology or equivalent experience 
• Previous experience in a food manufacturing environment with laboratory testing and sampling experience
• Experience in microbiology, GMPs, chemistry, design, sanitation and quality systems 
• Must be adaptable and flexible
• Must be organized and analytical
• Excellent communication skills
• Ability to work independently
• Excellent recordkeeping/documentation skills
• Basic understanding of microbiological and chemistry testing procedures
• Basic understanding of laboratory testing equipment

Qualifications: BS in Dental Laboratory Technology with 3 years of Experience

• Completion of Post Offer Exam or Completion of Work Simulation 
• Proficiency with computer systems including Microsoft Office products, LIMS (list other lab systems), etc.
• Ability to work in a lab environment including wearing appropriate PPE and other safety equipment and considerations
• Ability to work in a highly regulated environment
• Demonstrated strong math and documentation skills
• Demonstrated strong oral and written communication and interpersonal interaction skills
• Ability to maintain and diagnose issues with the equipment used
• Experience in PM programs
• Ability to multitask

Qualifications: BS in Industrial Technology with 4 years of Experience

• Experience in a similar role/industry as a laboratory analyst
• Hands-on experience with laboratory instrumentation and analytical methods
• Ability to work independently and in a flexible team environment
• Solid organizational, interpersonal, and computer skills
• Familiarity with a laboratory environment and the ability to prioritize work in changing plant operations
• Familiarity with working with lab equipment, instrumentation and troubleshooting, and LIMS data entry
• Ability to use programs such as Excel, Word, and typical data collection systems/methods
• Experience working in a lab environment 
• Familiar with sample prep and chemical testing using wet chemistry techniques
• Self-motivated, enthusiastic and quick to learn and an ability to follow written instructions
• Evidence of flexible and adaptable working behavior to meet customer/business requirements and good time management skills

Qualifications: BS in Chemical Engineering with 5 years of Experience

• Ability to perform detail-oriented work with a high degree of accuracy
• Ability to communicate clearly, including effective oral and written communication skills
• Effective multitasking capabilities
• Proficient in Microsoft Office, including Word, Excel, and PowerPoint
• Demonstrated ability to keep neat, accurate and complete records and logs
• Familiar with general GMP/GLP procedures with a strong focus on quality
• Experience in a GMP or GLP environment
• Team leadership, friendly and loves a challenge
• Robust organizational and time management skills
• Ability to work in a fast-paced STAT environment
• Proficient knowledge in Hematology, Chemistry, Urinalysis, and fluid analysis
• Experience with 2-3 of the following instruments: Advia 2120i, Immulite 2000 XPi, AU680/5800, Clinitek Advantus, or Stago STarT

Qualifications: BS in Materials Science and Engineering with 6 years of Experience

• Experience in a chemical lab environment 
• General understanding of measures (viscosity, density, etc)
• Knowledge of physical terms and the ability to use/convert metric to imperial systems
• Strong attention to detail and a high level of accuracy in work
• Strong basic math aptitude
• Demonstrated ability to communicate effectively
• Ability to understand and implement test methods
• Experience with MS Word, Excel and Outlook
• Must have a valid driver's license and be insurable through the company's insurance provider

Qualifications: BS in Mechanical Engineering Technology with 2 years of Experience

• Understanding of HSE requirements relating to lab operations
• Understand the test procedure and carry out the test competently
• Must be a team player in the laboratory
• Experience in the construction industry
• Experience reading blueprints 
• Exposure to AutoCAD 
• Proficient with Microsoft Word, Excel and Outlook
• Ability to effectively communicate (in writing or verbally), presenting information individually or in small group situations to internal or external customers
• Ability to follow directions, ensuring the results are accurate and completed within the required timeframe
• Ability to deal with problems involving a few concrete variables in standardized situations
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
• Ability to work independently and under moderate supervision

Qualifications: BS in Industrial Technology with 4 years of Experience

• Work experience in an FDA/ISO regulated manufacturing facility, public health laboratory or similar institution
• Knowledge and Familiarity with working in Biosafety Level 1 (BSL1) laboratories
• Familiarity with working in Class A laboratories
• Basic computer skills
• Hands-on and fluent with basic lab equipment
• Knowledge of Biosafety Level 2
• Mechanical aptitude and familiarity with sterilizing/cleaning equipment
• Ability to communicate effectively with all levels of professional personnel and a strong team player
• Ability to follow oral and written procedures
• Organized and capable of working independently under minimal supervision
• Must be a self-starter with a strong focus on quality, attention to detail and delivering results

Qualifications: BS in Biotechnology with 3 years of Experience

• Must have Electrocardiogram (EKG) Certification 
• Experience with patient/customer service, patient greeting, reception and good telephone skills
• Experience in cardiopulmonary and/or vascular testing 
• Experience in cardiopulmonary diagnostic testing
• Experience in lower arterial and venous testing
• Able to perform efficiently in a multitasking environment
• Understand and comply with safety SOPs and procedures (Material Safety Data Sheet (MSDS) guidelines, Near Miss, Personal Protective Equipment (PPE), biohazard training, Monthly Safety training, etc.)
• Demonstrate the ability to perform mathematical calculations and metric conversions
• Demonstrate good interpersonal and communication skills within and outside the department using verbal, written, and non-verbal skills
• Able to obtain a license and operate mobile powered material handling equipment (i.e., forklift, tank tugs, etc.)

Qualifications: BS in Chemistry with 5 years of Experience

• Ability to perform calibration on instruments with accuracy and precision in accordance with established procedures
• Aware of environmental factors such as temperature, vibration, and noise affecting calibration
• Working knowledge of the underlying principles of the chromatographic process, mechanisms that result in chromatographic separation, analytical techniques used to determine the composition of natural gas and calculate its energy content
• Knowledge of and ability to perform asset-specific preventative and predictive maintenance to assure equipment operation at acceptable performance levels
• Knowledge of and practical experience with industry standards for hydrocarbon sampling and testing from American Society for Testing and Materials (ASTM), American Gas Association (AGA), GPA Midstream Association and related organizations
• Knowledge of natural gas components, their chemical composition and the effects of temperature and pressure
• Ability to recognize safety risks in operational activities and use appropriate measures to control and manage identified risks
• Ability to recognize and identify potential hazards
• Understands potential threats created by deviation from safety procedures and improper use of tools and equipment
• Demonstrates knowledge of lockout/tag out procedures
• Ability to collect a representative sample in accordance with sampling protocols can be determined for economic and treatment purposes
• Understands conditions affecting sample quality

Qualifications: BS in Quality Assurance with 6 years of Experience

• Excellent timekeeping and good organisational skills
• Ability to keep accurate records
• Ability to work with others in a team environment
• Tertiary qualification in a science-related subject 
• Previous experience in a laboratory environment 
• Motivated, capable of working independently
• Ability to follow specified test procedures
• Strong written and verbal English communication skills
• Proficiency in MS Word, PowerPoint, and/or Excel
• Experience working on projects with a fixed budget

Qualifications: BS in Industrial Technology with 4 years of Experience

• Experience in laboratory and field testing of soil and aggregate to NATA standards
• Working knowledge of the Microsoft Office suite and basic mathematical skills
• Must be able to understand and follow written procedures
• Must have a basic understanding of polymer tests, including melt index, density, and film appearance
• Must have a basic understanding of computer systems and networks
• Must have basic mechanical skills
• Must be able to work shift work
• Good verbal and written communication skills
• Able to accurately record/ transcribe data

Qualifications: BS in Packaging Science with 3 years of Experience

• Work experience in a chemical, analytical, or biological lab environment
• Detailed, organized and demonstrates good writing and oral communication skills
• Demonstrates basic computer proficiency and comfort with Word (tables), Excel and PowerPoint M/S Suite software
• Able to interact and develop proficiency in working with specific software used in lab testing
• Good standard of Education demonstrated by GCSE grades A-C in Maths, English and a Science subject, with a good standard of English (verbal and written) and attention to detail
• Competent and confident to work with unscreened human samples
• Previous clinical/research and development post experience 
• Proven experience as a lab technician with electrical components
• Experience in operating electrical and non-electrical laboratory equipment and potentially dangerous substances
• Ability to work autonomously and with a team

Qualifications: BS in Polymer Science with 5 years of Experience

• Experience in a clinical laboratory setting with comprehensive knowledge of high-throughput hematology, chemistry, immunoassay, urinalysis, O&P/fecal and related analyzers/diagnostics
• Understanding of test results to be able to determine if results are valid or the result of pre or post-analytical error
• Demonstrated ability to build, develop and work within a clinical laboratory team, including creative problem solving and flexibility to meet rapid growth
• Strong IT and LIS (laboratory information systems) experience and a high comfort level with computer systems, technology, and equipment interfaces
• Able to read and understand Standard Operating Procedures, troubleshoot sophisticated laboratory instruments promptly, and have a working knowledge of LIS procedures
• Strong computer skills and ability to work within the Windows and Laboratory Information System environment
• Advanced knowledge in Hematology, Chemistry, Urinalysis, and fluid analysis
• Team leadership, friendly and loves a challenge
• Strong interpersonal, written, and oral communication skills 
• Robust organizational and time management skills
• Ability to work in a fast-paced STAT environment
• Experience in the veterinary field 

Qualifications: BS in Molecular Biology with 6 years of Experience

• Previous experience with food quality specifications, process control monitoring and positive release documentation or similar experience with strict adherence to protocol 
• Advanced quality/food safety training and/or certifications
• Working understanding of food manufacturing acronyms (SQF, QA/QC, CQP, QAP, HACCP, SOP,5S, GMP, etc.)
• Ability to pass and successfully maintain regulatory certification
• Must have strong math skills
• Strong computer and business skills (SAP, Microsoft Office products, email, copy, scanning)
• Strong verbal and written communication skills
• Working with chemicals, wearing personal protective equipment and following approved chemical handling procedures

Qualifications: BS in Biochemistry with 2 years of Experience

• Experience working in a plastic materials laboratory, performing chemical and performance control tests and utilizing appropriate laboratory equipment
• Demonstrated understanding of a high-speed manufacturing operation, particularly in a plastics and paper environment
• Able to produce, analyze and interpret relevant laboratory test results
• Excellent technical report writing skills 
• Effective in communicating with co-workers to provide and receive direction
• Understanding of the importance of liaising with Sealed Air Food Law experts to confirm Food Law compliance
• Comfortable working in a large organization with a matrix organizational structure
• Sound organizational ability, diligence, and attention to detail
• Working knowledge of LEAN principles

Qualifications: BS in Biomedical Sciences with 4 years of Experience

• Demonstrable experience working within a cell culture environment
• Experience with multiple mammalian cell lines
• Experience in creating cell banks and stable cell lines
• Experience in molecular and cellular biology techniques
• Able to work both independently and as part of a research team
• Adaptable, enthusiastic, and approachable
• Good working understanding of cell culture laboratory equipment including Viciells, FACS and cell sorters
• Must be self-motivated and able to work with minimum supervision
• Must be able to repair and maintain lab equipment
• Must have extensive knowledge of lab equipment and computer systems
• Must know plant/site operations to optimize and prioritize special requirements

Qualifications: BS in Dental Technology with 5 years of Experience

• Experience working with hazardous chemicals
• Experience in a lab or pilot plant environment
• Experience with polymer/oligomerization chemistry
• Previous experience with Agilent GCs and Chemstation/Open Lab Software
• Familiarity with autoclaves and process control systems
• Excellent communication skills
• Dynamic, energetic, motivated with a positive outlook and “can-do” attitude
• Ability to work independently and as part of a team
• Good record-keeping skills and attention to detail

Qualifications: BS in Analytical Chemistry with 3 years of Experience

• Basic understanding of electrical and mechanical concepts, terminology and applications
• Proficiency in English and Spanish
• Computer skills including Microsoft Word, Excel, and PowerPoint
• Demonstrated ability and drive to get things done
• Great documentation and communication skills
• Enjoys working in a team environment
• Independent and self-managing
• High energy with an enthusiastic attitude
• Experience in validation, verification and qualification testing of low and medium-voltage power distribution equipment and components
• Familiarity with power distribution systems including equipment and components
• Familiarity with power monitoring and control systems
• Familiarity with relevant industry standards from NEMA, ANSI, IEC, CSA and UL
• Working knowledge of LabVIEW

Qualifications: BS in Industrial Technology with 4 years of Experience

• Must be able to perform some repetitive tasks with accuracy and precision
• Must be able to perform basic analytical procedures that are both accurate and precise
• Must have the ability to read and follow documented procedures, SOPs, safety rules, and operating and maintenance instructions
• Analytical thinking and problem-solving skills
• Must have some understanding of process and workflow
• Proficiency in Microsoft Excel, Word, and Outlook
• Experience with LIMS 
• Demonstrates the utmost level of integrity in all instances and shows respect towards others and towards company principles
• Excellent time management skills, which include the ability to balance multiple projects concurrently (with different deadlines) and arrange the resources necessary to accomplish them
• Ability to interpret data and to troubleshoot and resolve technical issues
• Strong work ethic, excellent written and oral communication skills, and the ability to work as a project leader as well as independently
• Must be flexible and demonstrate the ability to switch priorities to meet business needs

Qualifications: BS in Chemical Engineering with 5 years of Experience

• Experience in a (multi-disciplinary) lab environment
• Working experience in Laboratory management/coordination
• Good understanding and experience with Good Laboratory Practice (GLP)
• Hands-on attitude, which means taking initiative, having a flexible approach, and solving problems daily
• Excellent communication skills in English 
• Good organizational skills, accurate, eager and open attitude are attributes 
• Highly motivated to work in a multicultural and dynamic environment
• Experience using HPLC/GC analytical methods
• Strong analytical skills, ability to analyze data and trends and draw conclusions

Qualifications: BS in Materials Science and Engineering with 3 years of Experience

• Good written and verbal communication, interpersonal, and relationship-building skills
• Able to read, comprehend, write and speak basic English
• Good computer skills, including the use of MS Office
• Moderate knowledge of laboratory processes
• Moderate knowledge in QSR (Quality System Regulation), FDA (Food and Drug Administration), and ISO (International Organization for Standardization) regulations
• Moderate knowledge in mathematics, e.g., decimals and percentages
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department's clean room medical device manufacturing
• Knowledge of Good Manufacturing and Good Documentation Practices supporting a medical device environment
• Must be able to work in a team environment
• Ability to provide feedback in a professional, direct, and tactful manner

Qualifications: BS in Electrical Engineering Technology with 4 years of Experience