• Schedule, prepare and perform or sub-contract tests and inspections according to the DVPR
• Design and kick off specific jigs and tools and chassis
• Test samples and attachment reception and incoming check
• Prioritize testing needs and maintain a documented daily productive schedule
• Checks for reproducibility, accuracy, and precision of data
• Reviews testing results promptly and prepares reports
• Support the PAE in their activity, analyze test requests and report any issues or discrepancies with the POAI procedure
• Direct technician and operator work in case of the test, need technician and operator supporting, take final responsibility
• Perform individual test requests, benchmark the project based on lab work arrangement
• Support on-site troubleshooting on the customer side in case of need

Skills: Test Scheduling, Jig Design, Tool Design, Sample Inspection, Data Validation, Test Reporting, Team Supervision, Onsite Troubleshooting

• Oversees the performance of advanced diagnosis and repair of test and measurement equipment and software
• Support for equipment, regular maintenance and calibration based on the lab work arrangement
• Support CCC/ ECE test and certification
• Flexible to support proto activities to balance workload
• Participate in continuous improvement and corrective action activities
• Support and follow the POAI quality system such as test data and equipment usage records and document management
• Suggest, supervise or support the design or the modification of test equipment/procedures to meet new customer requests or improve quality, reduce cost and time
• Assists in training new associates within the department
• Consciously accept safety training, actively participate in safety activities and comply with safety regulations
• Report unsafe status and behaviors in time, and actively participate in safety improvement

Skills: Advanced Diagnostics, Equipment Calibration, Certification Support, Process Improvement, Quality Compliance, Test Equipment Design, Training Support, Safety Compliance

• Responsible for efficient, timely and accurate laboratory testing service
• Accountable for objectives, schedules and work performed
• Documents test results for the assigned tests
• Compiles and issues test reports for review
• Perform the assigned maintenance and calibration tasks for lab analytical instruments or equipment
• Work closely with the R&D team in the execution of laboratory and experimental programs for the development of new products and materials
• Assist R&D in performing materials characterization (thermal, mechanical, electrical) for the development of new high-performance products
• Identify and enhance lab best practices and optimize operating and safety procedures, for example, work instruction, risk assessment, etc.

Skills: Laboratory Testing, Schedule Management, Test Documentation, Report Preparation, Equipment Calibration, R&D Collaboration, Materials Characterization, Process Optimization

• Ensure equipment calibration and metrology compliance of plant equipment
• Maintain the metrology database according to requirements
• Make sure all calibration certificates for equipment are available and according with the necessary period of time
• Create the calibration records for the equipment
• Maintain to standard requirements for the equipment in the laboratory area
• Train the laboratory technicians regarding the measurement methods and the way how to use the equipment
• Establish the work instructions for laboratory equipment
• Responsible for the technical implementation of LIMS at key sites, following global standards
• Deliver IT projects for laboratories and execute in accordance with the agreed timelines
• Configure and customize the global LabWare LIMS and Empower system per global standards
• Communicate the status of Lab IT projects to the site and global leadership teams
• Collaborate with other functions at the global and site level to ensure LIMS projects are successful
• Develop and manage the budget for each project
• Ensure that IT projects fulfill the requirements and needs of the individual site lab as well as global quality

Skills: Equipment Calibration, Metrology Compliance, Calibration Records, Work Instructions, LIMS Implementation, System Configuration, Project Management, Technical Training

• Accountable for the safe and HSE-compliant operation of equipment under his/her responsibility
• Ensures that the laboratory staff follow industry standards and regulations
• Plans and runs analytical activities safely and efficiently
• Provides guidelines for the compilation of analyses, reports and data services to maximize profit, and facilitates reaching optimum performance within the analytical team
• Performs test method development/validation/verification activities, conducts physical and chemical characterization on samples in accordance with standard procedures
• Responsible for the execution of project tasks and for the verification of analytical test and investigation reports before issuing (professional content and compliance with standards)
• Provides training and mentoring for the lab technicians on work discipline and the proper use of analytical lab equipment
• Mentors and instructs lab staff
• Continuously seeks and proposes development opportunities to improve the service level of the analytical team with the aims of enhancing internal/external client satisfaction and meeting future professional and business demands
• Keeps contact with fellow organizations to harmonize group-level standards, incl. quality management, exploits analytical resources, shares opportunities and contributes to collaborations in the field of analytics, both internal and external ones
• Maintains documentation, equipment and work areas in neat, orderly and safe condition
• Prepare highly complex technical specifications
• Participates in quality complaint investigations coordinated by Product Development and Technical Service
• Responsible for the non-routine handling, special calibration, cleaning and installation of devices, equipment and instruments
• Maintains contact with service providers and MOL maintenance units to ensure the continuous availability of the instruments under his/her professional supervision

Skills: Equipment Calibration, Metrology Compliance, Certificate Management, LIMS Implementation, IT Project Delivery, Test Method Validation, Technical Mentoring, Safety Compliance

• Provide Engineering insight and improvement solutions for new product development
• Screen and analyze new product performance to provide decisions for next steps
• Statistically evaluate and interpret collected product data
• Evaluate and analyze data collected from field research using a statistical approach
• Review shortcomings and faults of the current design to pinpoint weaknesses and improvement points
• Utilizing CAD-based software and engineering analysis tools, design and prototype new improvements for existing products
• Communicate with various R&D and factory laboratories to provide usage-based engineering and design statistics
• Create new LG internal testing protocols to benchmark LG NPI Products
• Fully understand and interpret CU testing protocols to adapt to CU Benchmarking

Skills: Engineering Analysis, Product Evaluation, Statistical Analysis, Data Interpretation, Design Improvement, CAD Prototyping, R&D Collaboration, Test Protocol Development

• Create and manage testing plans to accomplish responsibilities promptly
• Benchmark competitor products to understand the advantages and disadvantages of each product
• Explore new opportunities for improvement through research of new testing equipment, methods and industry standards
• Program new visual analysis tools to improve communication by eliminating excess and strengthening quantitative tools
• Create automated data analysis systems to automatically calculate results from data sets to reduce invested manpower
• Create a custom reporting structure to improve the process from DAQ raw data to the reporting format
• Research and verify new actual usage protocol development
• Create new testing methods based on the VOC/FFR/Customer information against standard AHAM/DOE-based testing methods
• Run statistical analysis to determine the critical few from the trivial many for utility in protocol creation
• Create and program automatically calculated testing protocol templates/layouts to raise efficiency for data analysis
• Provide impact on DOE/AHAM/EPA standard rule-making through expert input based on test results and consumer facts

Skills: Test Plan Management, Product Benchmarking, Equipment Research, Visual Tool Programming, Automated Analysis, Report Structuring, Protocol Development, Statistical Evaluation

• Work with Principal Investigators (PIs) throughout the campaign development process to plan successful and efficient experiments
• Ensure system safety is maintained
• Participate in the development of and provide support for a wide range of equipment and instrumentation
• Participate in experiments as a member of the Omega field operations crew
• Write procedures and other documentation
• Contribute to R&D activities by performing synthesis, physical and chemical analysis, electrochemical analysis, and by data evaluation and interpretation
• Perform routine analysis on materials from pilot plant, including physical and chemical analysis (XRF, ICP-OES, OEA, TGA, SEM, EDX, gas sorption, particle size, etc.) and electrochemical analysis (galvanostatic cycling in lab-type Li-ion and Na-ion cells)
• Help to develop new experimental and analytical methods
• Document lab work results and findings in ELN and LIMS (and other databases and documentation systems)
• Take over laboratory and instrument responsibility (including installation, calibration, maintenance, and troubleshooting)
• Perform routine tasks (shipping samples, ordering consumables and chemicals, handling waste, etc.) to keep labs operating

Skills: Experiment Planning, System Safety, Equipment Support, Physical Analysis, Chemical Analysis, Method Development, Data Documentation, Instrument Maintenance

• Assist in developing SOPs and laboratory engineering documents
• Perform back-ups of the laboratory instruments and systems
• Perform instrument calibrations 
• Identify and implement improvements to laboratory engineering operations
• Work under minimal supervision on complex projects and may assist less experienced peers 
• Execute self-directed laboratory engineering projects 
• Manage small complex laboratory engineering projects 
• Supervise the activities of contractor(s) 

Skills: SOP Development, System Backup, Instrument Calibration, Process Improvement, Project Execution, Technical Supervision, Contractor Oversight, Independent Work

• Support AV-8B and T-45 aircraft integration activities
• Ensure that the laboratories are in a ready-to-test state for AV-8B and T-45 aircraft customers
• Support designing facilities infrastructure required for laboratory workstations and test sets
• Create/edit electrical and mechanical design of laboratory workstations, test sets, and test equipment
• Develop laboratory hardware solutions to support design, development, and integration testing of avionics systems
• Create/edit electronic design of custom laboratory interfaces (circuit card assemblies)
• Support customer organizations to identify laboratory requirements and work with the Lab Operations Team to ensure the requirements are met
• Define and refine laboratory hardware and test equipment requirements
• Coordinate with the Lab Task Team and customers to ensure proper maintenance (update/repair/calibration) is being performed to meet customer test requirements and schedule
• Support Lab testing to reproduce issues identified on the aircraft
• Assist in troubleshooting to isolate anomalies on board aircraft
• Support IPT engineers to develop prototype solutions and demonstrations for emerging capabilities

Skills: Aircraft Integration, Lab Readiness, Facilities Design, Hardware Development, Circuit Design, Requirements Definition, System Maintenance, Issue Troubleshooting

• Previous experience working in a laboratory environment
• Experience with material testing, for example, covering tensile testing, chemical analysis, micro-structure analysis including the operation of related laboratory equipment
• Must have strong analytical skills
• Solid written and verbal communication skills 
• Good knowledge of Swedish and technical English 
• Experience in an aero-component repair environment
• Good knowledge of laboratory and methodologies
• Great people skills in managing a laboratory team
• Strong commitment to safety
• Highly independent and strong interpersonal skills with good team player abilities

Qualifications: BS in Materials Science with 4 years of Experience

• Experience as an Automotive Technician, Aerospace technician, HVAC, Plumbing or Electrical trade professionals
• Comfortable with basic machine shop tools
• Must be comfortable performing hands-on electrical, mechanical, and plumbing tasks
• Innovative, customer service and team-oriented
• Strong shop-math skills to perform the necessary calculations to perform engineering tests and conduct mechanical inspection of various components (sheet metal, plastic, electrical, etc.)
• Experience with LabVIEW or MATLAB
• Experience in chemical-technical manufacturing
• Knowledge and interest in protective coating paints and/or surface coverage products
• Fluent English and good knowledge of Swedish, in both speech and writing
• Good knowledge of Microsoft Office (Excel, Word, PowerPoint) 
• Knowledge of Microsoft SharePoint and SAP (SAP Saturn)

Qualifications: BS in Chemical Engineering with 6 years of Experience

• Experience in the soil testing industry
• Good analytical ability, organizational and time management skills
• Self-driven, possesses excellent team spirit and good interpersonal skills
• Knowledge of computer systems and software related to process control and optimization
• Experience with Excel spreadsheet functions and layouts, JMP, SAS, or Minitab, or a similar statistical analysis program, and data collection programs
• Ability to interface, orally and in writing, with employees of various disciplines and levels within various departments
• Strong analytical and technical skills
• Ability to solve complex problems
• Ability to innovate, and a strategic business perspective
• Ability to work with interdisciplinary and cross-functional teams to take a concept to commercialization

Qualifications: BS in Mechanical Engineering with 5 years of Experience

• Ability to work with microscopes, calipers, micrometers, laser micrometers and video inspection systems, other metrology and laboratory equipment for medical devices assessment
• Solid understanding and knowledge of engineering principles, theories, and concepts
• Strong knowledge of hydrodynamics and biological interactions with medical devices
• Working knowledge and understanding of statistical techniques
• Ability to understand established procedures, and may suggest alternative approaches
• Ability to analyze data and interpret standard practices and procedures to establish recommendations for problem-solving
• Must be able to effectively articulate, verbally and in writing, results and conclusions to technical and non-technical personnel
• Must have strong technical writing skills
• Clear understanding of good documentation practices and medical device quality system regulations and requirements 
• Knowledge of CAD modelling (SolidWorks) 
• Previous experience in medical device testing and/or process development 
• Must be a highly motivated self-starter who is driven to achieve quality and value-added results with appropriate direction
• Ability to work well both independently and as a member of a cross-functional team in a dynamic environment 
• Solid problem-solving, organizational, analytical and critical thinking skills
• Excellent teamwork and interpersonal skills including negotiating and relationship management
• Ability to build productive internal/external working relationships

Qualifications: BA in Chemistry with 7 years of Experience

• Experience in laboratory work
• Good understanding of measurement science, technical specifications and tolerances
• Understanding and practical knowledge of the concept of technical cleanliness and/or welding analysis
• Ability to work independently and manage tasks simultaneously in a fast-paced environment
• Analytical thinking style in problem-solving with a hands-on and can-do attitude
• Fluent English skills
• Possess a thorough knowledge of all the equipment and processes used in the laboratory
• Able to make rational decisions under pressure
• Must have good IT skills
• Must have a good understanding of ISO 17025:2017
• Must have a good understanding of AMS2750F

Qualifications: BA in Physics with 4 years of Experience

• Working experience in lab management
• Experience in verification or validation test experience
• Experienced at project testing and lab lead
• Familiar with project management, specializing in R&D lab developments, etc
• Experience in Chemical Engineering and Science
• Able to be a good team player and display good communication skills with fluency in English
• Good interpersonal skills, with an aptitude for teamwork and the ability to guide others
• Ability to work independently and be able to identify and drive process improvements
• Able to be in an analytical mindset with a proven ability to resolve problems and identify solutions

Qualifications: BS in Environmental Engineering with 5 years of Experience

• Experience in electrical manufacturing, battery manufacturing, or a similar field
• Experience in electrical testing methods and defect investigation
• Experience in automotive bus systems (CAN, LIN)
• Experience in laboratory work, in electrical-related testing
• Knowledge of quality lab methods, tools and techniques including statistical process control
• Excellent networking and problem-solving skills
• Analytical thinking style with a hands-on attitude
• Fluent in spoken and written English
• Must have Six Sigma Green or Black belt

Qualifications: BA in Biology with 3 years of Experience

• Broad knowledge of a wide range of general-purpose test equipment
• Experience in power or industry high voltage measurements
• Working experience in the RF, microwave, telecommunications, and/or optical field of test equipment, acquired with a test equipment manufacturer, calibration house, or armed services
• Flexible and able to work well within a team
• Able to perform well and deliver under pressure within limited timescales
• Customer service oriented with a good telephone manner
• Experience with computer-based engineering systems
• Knowledge in Basic Statistics, Chemistry, Laboratory testing and safety knowledge,
• Advance skills in English communications, operating a computer (MS Word and Excel)

Qualifications: BS in Engineering Physics with 4 years of Experience

• Working experience in a metallurgical laboratory
• Working knowledge of NADCAP requirements and accreditations
• Experience in light optical microscopy and metallography 
• Technical writing skills to quickly learn how to produce project reports promptly
• Excellent ability to represent the company professionally in communicating and interfacing with customers
• Ability to maintain company and customer confidentiality
• Proven ability to work with minimum supervision, displaying initiative and self-sufficiency
• Effective organization, planning, and prioritization skills
• Must be able to perform tasks to a deadline and within tight time frames
• Ability to quickly understand and learn new tasks from varying levels of staff

Qualifications: BS in Nuclear Engineering with 5 years of Experience

• Basic project management skills
• Experience in machine maintenance
• Experience in operating production equipment
• Comfortable with working in cleanrooms
• Comfortable with multicultural collaboration
• Comfortable with start-up working dynamics
• Comfortable with some travelling
• Experience with electronic hardware and software design
• Analytic thinking, effective problem-solving skills and risk assessment methods by using modern analysis and design tools
• Skills for collaborating in international, cross-functional engineering project teams
• Good communication skills and technical English Language skills

Qualifications: BS in Civil Engineering with 4 years of Experience