Electronics Engineer Skills, Experience, and Job Requirements

ELECTRONICS ENGINEER SKILLS, EXPERIENCE, AND JOB REQUIREMENTS

Updated: Jun 02, 2025 - The Electronics Engineer has expertise in network engineering, specializing in Arista and Cisco core network technologies, including deep knowledge of Cisco IOS, OSPF/BGP routing, multicast, and VLAN troubleshooting. This role requires proficiency in configuring firewalls, VPNs, and network devices, with hands-on experience in Python scripting, AWS networking, and advanced data capture tools like Corvil CNE. Strong problem-solving and documentation skills complemented by experience in managing projects and ensuring robust network performance.

Essential Hard and Soft Skills for a Standout Electronics Engineer Resume

Circuit Design
Soldering
PCB Design
Microcontroller Programming
Embedded Systems
Signal Processing
Power Electronics
Hardware Testing
Troubleshooting
Digital Electronics

Problem-Solving
Communication
Teamwork
Creativity
Attention to Detail
Time Management
Critical Thinking
Adaptability
Collaboration
Multitasking

Summary of Electronics Engineer Knowledge and Qualifications on Resume

1. BS in Electrical Engineering with 4 years of Experience

Experience with designing AC/DC power supplies, test and analysis tools, and systems
Strong circuit simulation experience (PSpice/Simplis/ SIMetrix)
Schematic and PWB layout experience (Cadence)
BOM, change notice, and documentation experience (PTC Windchill)
High-frequency magnetics design knowledge
Hands-on experience related to EMC of switch mode power supplies
Knowledge of IPC 9592B - Requirements for Power Conversion Devices for the Computer and Telecommunications Industries
Self-motivated, detail-oriented, strong team player
Excellent problem-solving skills and the ability to think creatively
Ability to prioritize and communicate in a dynamic environment with strong oral and written communication skills
Strong interpersonal and leadership skills, and the ability to drive projects to completion

2. BS in Electronics Engineering with 3 years of Experience

Strong electrical engineering background in analog or mixed-signal design. (e.g. Op-Amp, feedback, filter, ADC/DAC or signal processing, etc.)
Hands-on experience in the module- or system-level design in one or more phases including hardware design, fabrication, testing, validation, and mass production.
Excellent written and verbal communication skills and solid teamwork and leadership skills.
Scripting (e.g. Python, MATLAB, LabView, or JMP) to enable data collection and analysis
Proficiency in COMSOL, SPICE, or similar simulation and modeling tools
Experience with Touch or capacitive sensing technology
Strong technical product knowledge and customer service experience
Strong Time Management and Decision-Making skills.
Exceptional listening and understanding to solve problems effectively and efficiently.
Maintains positive and professional relationships with external vendors, service providers, and customers.
Detail-oriented with a high focus on planning.

3. BS in Power Engineering with 8 years of Experience

Excellent technical writing, presentation, and interpersonal communication
Demonstrated problem-solving skills
Design and troubleshooting of electronic and electromechanical systems
Mechanical design using 3D CAD software (Solidworks or similar)
Controls/systems engineer or co-op experience in appliance, automotive, aerospace, or medical industry
Exposure to PCB layout and simulation tools
Exposure to regulatory agencies and safety/certification standards (UL or similar)
Experience with automated hardware and software testing
Experience with C/C++ software development for embedded systems
Experience with Agile/Scrum project management
Experience with requirements management software (Jama, Doors, or similar)
Professional experience as controls/systems engineer in appliance, automotive, aerospace, or medical industry

4. BS in Systems Engineering with 2 years of Experience

Prior experience repairing and maintaining electronic equipment
Basic to Intermediate knowledge of electronic equipment and system
Intermediate to Advanced level of proficiency in electronic troubleshooting and solving electronic problems
Position-specific STCW training from an accredited educational institution
Must be able to work independently
Passionate about hospitality and customer service driven
Must have a professional appearance and good hygiene, respect for all co-workers and guests
Pride in work by creating positive energy, excitement, and fun
Demonstrate positive behaviors, smiling, being polite and courteous
Able to develop a camaraderie with team members
Ability to live in close quarters, and share limited space with other cabin-mates

5. BS in Automation Engineering with 3 years of Experience

Normal to high manual dexterity skills
Able to interpret and comprehend schematics, mechanical drawings, data sheets, functional specifications, block diagrams, performance specifications, bill of materials (BOM), and engineering change orders (ECO)
In-depth understanding of electronic theory, both digital and analog
Basic working knowledge of LabVIEW
Working knowledge of computers, interfaces, and add-on boards
Proficient in test measurement and troubleshooting techniques on electronic assemblies/subassemblies in a manufacturing environment involving Printed Circuit Boards (PCBs) and EOL Test Systems
Knowledge of quality standards and production techniques
Demonstrates problem-solving skills and the ability to develop creative solutions
Proficient in Microsoft Excel, Word, and PowerPoint
Demonstrates the ability to use a multimeter, power supply, and oscilloscope
Excellent communication, interpersonal, organization, and prioritization skills

6. BS in Control Systems Engineering with 5 years of Experience

Experience in Firmware development on Toys MCU system
Experience with project manage in-house developed product and technology
Familiarity with developing Bluetooth, or Wifi based products
Familiar with cross-functional team development environments with GitHub and Confluence
Experience in people leadership/peer coordination, good team spirit
Hands-on experience in PCB design, prototyping, and troubleshooting
Experience in embedded C/C++ firmware programming and debugging
Knowledgeable in IoT system development and various digital interfaces
Experience in automotive system/power electronics/thermal design
Good interpersonal skills and communication (both oral and written) in Chinese and English
Creative mindset and ability to troubleshoot/solve problems effectively
A quick learner and able to pick up new skills spontaneously

7. BS in Computer Engineering with 6 years of Experience

Experience with PCBs, CCS, and XC8 compilers
HMI programming skills and understanding of other communication protocols
Experience with Mentor Graphics PADs or similar software
Strong understanding of electronic components and how they are used
Knowledge and/or experience working with UL and other listing agencies
Knowledge of power electronics fundamentals
Experience in software development and the use of electrical design analysis
Good knowledge and experience in Microsoft Office software.
Experience in a high-reliability product development and manufacturing environment
Good organization, teamwork, communication, and interpersonal skills.
Great analytical and problem-solving skills and motivation to learn.
Strong time management skills, self-direction, and the desire to excel.

8. BS in Electrical Engineering with 4 years of Experience

Previous product development experience (design/analysis)
Power electronics design and development experience
Experience with electric drive systems and/or components
Strong communication skills, self-starter with strong technical leadership skills
Demonstrated ability to lead teams through complex assignments
Excellent analytical skills, experience with circuit and system simulation and analysis tools
Demonstrated understanding of mechanical and electrical systems with special emphasis on stationary power conversion systems, including 3-level converters
Experience with quality tools including FMEA, APQP, and PPAP
Experience with the NPI Issue resolution process
Solid organizational and facilitation skills
Proven managerial skills within the engineering sector

9. BS in Mechatronics Engineering with 10 years of Experience

Full product lifecycle development experience.
Global, Multi-Cultural, Matrix Organization Experience
Experience in Electronic Engineering
Experience in mixed Analog and Digital Electronics
Degree in Electronic Engineering or similar discipline
A strong background in digital circuit design from initial concept and specification, through to design, debugging, and system integration.
Thorough understanding of PCB Layout, Mechanical, Software, and Manufacturing requirements of the design process.
Strong, demonstrable Leadership skills in an Engineering environment
Recent experience in electronic circuit design and motor control systems
Ability to design using electronic CAD software tools (Altium preferred)
Hands-on experience breadboarding and debugging circuits (analog and digital)
Familiarity with high-volume production fabrication processes
Basic project management proficiency
Familiarity with EMC (electromagnetic compatibility) and Safety (U/L) design, compliance, and testing practices

10. BS in Computer Engineering with 6 years of Experience

Experience in hardware layout reviews.
Experience in component selection, schematic designs, lab environments, and performing HW-related tests.
Experience in electronics and the development of hardware.
Knowledge of digital system design at the board level.
Interest in low-level software programming.
Knowledge of DCDC and ACDC converters.
Good understanding of radio modules and standard communication protocols such as UART, I2C, and SPI.
Professional electronics engineering experience
A good understanding of electronics, PCBA, Li-Ion batteries, cells, BMS, chargers, motors
Experience with oscilloscope and other testing devices
Excellent analytical and communication skills
Experience testing at the circuit board and system level
General understanding of engineering process and design lifecycles

11. BS in Automation Engineering with 5 years of Experience

Good requirements management skills
The ability to read circuit layout documents, as well as understand and be involved in all phases of the product development life cycle.
Understanding of fundamental Electronics/Engineering concepts and principles specific to area of practice
Understanding of lifecycle management and systems engineering
The ability to perform all stated/implied duties within the level/tier and those reasonably derived from the preceding tier
Knowledge of manufacturing technologies, and good knowledge of the Production Part Approval Process (PPAP).
Good knowledge of MS Office, and 2D/3D CAD systems are further requirements.
Positive spirit, proactivity, team working, speediness, and problem-solving orientation.
Strong demonstrated experience in electronic/electrical design
An understanding of regulatory and safety requirements for safety-critical products (ideally gained in an avionics or similar environment).
Be familiar with technologies in power switching and control circuitry.

12. BS in Systems Engineering with 3 years of Experience

Knowledge of electronics design and development activities including exposure to design for manufacture and test methodologies.
Exposure to performing root cause analysis of hardware issues.
Experience using Mentor Xpedition or equivalent PCB schematic design toolset and Simetrix or equivalent circuit simulation tool.
Flexibility to support short-notice trials and long working hours.
Drive and determination to resolve problems with minimal supervision, and the ability to work equally well alone or as part of a team.
Good communication skills with internal/external stakeholders with strong interpersonal skills.
Able to take on responsibility and hold themselves and others accountable for their actions.
Some experience working in the electronics industry
A broad understanding of electronic disciplines will be expected to work on all aspects of the product life cycle with new and existing products
Knowledge of generic Analogue and Digital circuits and their design principles

13. BS in Power Engineering with 7 years of Experience

Familiarity with systems design principles and ability to identify and solve system problems related to electronic hardware
Experience with space hardware architecture, specification, design, integration, and testing
Strong understanding of hardware engineering, electrical engineering, electronics, and thermal/heat dissipation
Experience following processes to ensure quality and predictability of hardware development
Strong mathematical background with applied mathematics
Ability to design, analyze, and evaluate hardware products for space applications
Able to solve program unusually/complex technical problems and provide solutions that are highly innovative and achievable
Knowledge of hardware integration, testing, and verification
Experience with electronic modeling, generating and interpreting engineering drawings
Experience with RF and/or remote sensing space qualified payload concept/architecture expertise with design AIandT and on-orbit experience
Critical thinker, with prudent risk tolerance to balance risk and technology with requirements, cost, and schedule
Competitive spirit accepting of challenges with a willingness to learn and recover from mistakes
Proven ability to work and lead in a small team environment
Strong written and oral communication skills with experience presenting technical material

14. BS in Control Systems Engineering with 8 years of Experience

Knowledge in the use of instrumentation, data acquisition, and data analysis.
Proficient in AutoCAD Electrical and/or SolidWorks Electrical.
Familiar with SolidWorks, and with PDM.
Familiar with NEC standards contained in NFPA70 and NFPA79.
Proficient in programming with the following - Yaskawa Servos, Lab View, MATLAB, Minitab, or JMP.
Experience with qualification protocol generation and execution.
Working knowledge of cGMP, GDP
Ability to create PandID designs and documentation, to configure Ethernet network and devices
Ability to read and understand electrical schematics and manufacturing drawings.
Ability to program HMI and PLC computers, and create and modify CAD drawings.
Experience in management of BOMs and working within UL, ETL, CE/ROHS/REACH/WEEE standards.
Familiar with NEC standards contained in NFPA70.
Proficient in programming some of the following or similar applications - RSLogix 500/5000, Wonderware InTouch, FactoryTalk View HMI, or Servo drive programming.
Comfortably working on small projects lasting a few days and large projects extending over one year.

15. BS in Electronics Engineering with 9 years of Experience

Expertise analyzing TECHSIGNINT (including ELINT and FIS) data with a focus on producing reporting using community tools, databases, and production systems to create and disseminate products.
Experience conducting weekly retrievals through specific databases to identify and acquire reporting and raw data files of significant events related to priorities in directed mission areas.
Experience maintaining data file copies of specified signal sets to ensure pertinent and up-to-date information is available to all members of the ELINT analysis team.
Expertise in completing serialized reports of findings per production schedule.
Demonstrated technical writing and presentation skills.
Proven track record of delivering electronic circuit designs in both RandD and series production environments
Proficient user of schematic design and PCB layout tools
Familiarity with common industry technologies and protocols including PCIe, Ethernet, GMSL, CoaXPress, USB, I2C, UART, SPI, CAN, and LIN.
Scripting/software experience (e.g., Python, C++) and familiarity with Linux.
FPGA and VHDL/Verilog design experience
Experience working on safety critical systems with fail-safe and redundant features, avionics, military, rail, or automotive.
Strong electrical engineering, analog, digital, and power electronics fundamentals
Experience in board and system-level testing and characterization

16. BS in Systems Engineering with 10 years of Experience

Experience with microprocessor and microcontroller designs
Experience with memory subsystems e.g. DDR, Nand, EMMC
Experience with communication interfaces and buses - USB, SPI, I2C
Experience working in designing for signal integrity
Experience with signal and power integrity simulation tools (e.g. Hyperlynx, Sigrity, ADS, etc.)
Experience with high-speed communications interfaces and buses - e.g. Gigabit Ethernet, USB3.0, PCle, etc.
The ability to design for medium-volume product manufacture
Communicate effectively with others across multiple disciplines, and work well in a small focused team, sometimes against tight deadlines
Conscientious, reliable, and enthusiastic worker who takes pride in their work
Self-driven and motivated with the ability to use initiative and take a technical lead
Ability to work to a high level of quality with good attention to detail
Experience in a regulated industry, preferably with Project Management exposure
Appropriate work experience in roles focused on cost saving, efficiency, quality and process improvement, and statistical analysis, ideally with Product Lifecycle experience of electro-mechanical equipment
Proficient in MS Office, ideally with high skill in MS Excel and Technical Report Writing

17. BS in Automation Engineering with 8 years of Experience

Product Engineering experience in the design, development, or testing of equipment in the electrical/electronic domain
Experience with network communication and design
Detail-oriented and working knowledge of vehicle networks and protocols (CAN, J1939, IOSBUS, etc.)
Experience working with databases
Effective verbal and written communication skills, including good negotiation and issue-resolution skills, and the ability to work effectively in a global team environment
Ability to understand multiple, complex requests and negotiate a mutually beneficial plan in a very dynamic environment
Knowledge of engineering principles, theory, and practice
Experience designing functionality that spans multiple electronic control units and software modules
Experience with agricultural vehicle applications
Experience in roles that require a working knowledge of engineering principles as they relate to the company's product
Experience working with Agile methodologies
Working knowledge of tractor electrical and electronic systems
Formal training in System Engineering
Experience with Enterprise Product Development Process (EPDP)

18. BS in Mechatronics Engineering with 5 years of Experience

Senior-level professional experience in electronic product development in an R&D environment
Proven expert experience in digital/microcontroller hardware development
Proven expert experience in analog electronics design using a range of bipolar and MOSFET transistors, Op-Amps, passive components, etc.
Excellent verbal and written communication skills in English, and able to work in a team and liaise with other teams
Experience in the Fire or Security industry
Experience in design and type testing for compatibility with International Standards
Strong in digital and/or Analogue Simulation tools (e.g. SPICE)
Project Management and ability to lead small teams
A willingness to learn new technologies and accept new challenges
Flair for lateral thinking and problem-solving
Pro-active and self-motivating

19. BS in Electronics Engineering with 6 years of Experience

Hands-on prototype experience with EV/PHEV vehicles
Experience in HV design in the automotive industry
Experience working in commercial vehicles
Experience with specialty HV equipment such as Regulations
Advanced knowledge of high and low-voltage automotive systems design
Demonstrated ability to diagnose faults quickly and communicate corrective actions
Examples of working to high standards in the build process include documentation, build checks, signoffs, etc.
Ability to communicate succinctly and clearly about needs and issues
Hands-on experience either in professional or personal environments (Personal projects, working with factory floor, etc)
Experience working in small, collaborative environments, and the ability to create and maintain momentum in the workplace
Evidence of lateral thinking in agile environments
Good attitude and optimism toward the future, with strong work ethic and genuine humility

20. BS in Physics with 7 years of Experience

Thorough familiarity with laboratory RF equipment including antennas, signal generators, spectrum and vector network analyzers, oscilloscopes, power meters, filters and attenuators, noise sources, and associated measurement techniques
Experience working with digital signal processing in the context of RF signals - frequency translation, filtering, complex transforms, dynamic range matching, integration, etc.
Previous experience with firmware design for digital signal processing
Ability to select and work with RF signal-handling components in the UHF to S-band frequency range
Demonstrated interpersonal and collaboration skills including the ability to work successfully in an interdisciplinary environment with colleagues and others from a diversity of fields
Good verbal and written communication skills, willingness to work outdoors
Fluent in scientific computing with Matlab or Python
Experience as author or co-author of technical papers, reports, and refereed journal articles
Significant previous experience with either radio astronomy or radar applications
Proven ability to work with multiple concurring projects
Experience in the automotive industry
Knowledge of High Voltage Power Electronics such as On-board Charger, DCDC, and associated Hardware.
Vehicle Diagnostics working experience
Electronics, control systems working experience

21. BS in Robotics Engineering with 4 years of Experience

Knowledgeable in working with test equipment such as power supply, low power analysis tools, oscilloscopes, Logics analyzers, and spectrum analyzers
Knowledgeable in fundamentals electronics circuits, Printed Circuit Boards, Microcontroller ARM Cortex-M architecture, and peripherals such as ADC, SPI, I2C, timers, PWM, and UART
Exposure in HTTP, MQTT uplink integrations between network and application server
Having technical know-how in Linux Embedded
Independent and effective collaboration with other team members
Good understanding of Electronic Circuit Design.
Previous experience of EMC and CE Marking
Previous experience in the development and validation of innovative and cost-effective hardware solutions within the constraints of the program budget and schedule.
Ability to work effectively within a multidisciplinary engineering team.
Ability to build and sustain good working relationships and work closely in teams, with colleagues, managers, customers, and stakeholders.
High integrity and strong communication skills with peers and leadership.

22. BS in Mechatronics Engineering with 5 years of Experience

Experience in a network engineering or related role within a broker-dealer.
Excellent communication skills, verbal and written.
Ability to create and maintain documentation in Visio
Extensive experience with Arista or Cisco core network technologies (ASR 4k, Catalyst 6500, 4600 series) including a deep knowledge of the Cisco IOS platform
Knowledge of OSPF/BGP routing concepts, multicast (PIM-SM), IP/ARP/MAC/Spanning-tree issues and configurations, troubleshooting VLAN or physical connectivity for servers and other devices, troubleshooting Cisco access-list, NAT, QOS
Arista layer 1 switch (Metamako) configuration and troubleshooting experience
Intermediate/senior knowledge of Cisco ASA firewall configuration and management.
Experience with Corvil CNE for data capture for trading.
Python Bash shell, Netconf scripting experience
Experience in checkpoint firewall management
Cisco site-to-site VPN configuration experience (IKEV2)
AWS Network associate certification
Problem-solving skills along with basic project management skills

Relevant Information

Electronics Manager Skills, Experience, and Job Requirements

Electronics Specialist Skills, Experience, and Job Requirements

Electronics Instructor Skills, Experience, and Job Requirements

Electronics Technician Skills, Experience, and Job Requirements