• Perform testing of CommScope products, at an early stage of development, for compliance to relevant EMC standards prior to the formal approval stages. 
• Follow-on testing to ensure continued EMC compliance throughout the various stages of a product’s development lifecycle, culminating with internal Pre-Certification testing ahead of formal external Regulatory Testing with a 3rd party approvals facility.
• Provide EMC Design expertise (consulting) to meet design and customer requirements specifications.
• Co-develops and approves test specifications so that the product can be considered robust in the field.
• Identifies and manages issues that arise in testing and assists with the mitigation of the issue.
• Provides guidance, explanations, and clarity to enable proper interpretation and evaluation of specifications, performance characteristics, or other technical data.
• Focuses on finding root causes, corrective actions, and robustness/durability requirements.
• Arrange and support product testing at external laboratories.
• Review external test reports, able to engage with external test houses to determine compliance requirements.
• Preparation of test reports, product audits, and inspection instructions to support internal design validation procedures.

Skills: EMC Testing, Regulatory Compliance, EMC Design Consulting, Test Specification Development, Problem Resolution, Technical Data Interpretation, Root Cause Analysis, External Laboratory Coordination

• Support EMC manager with final reports.
• Advise, mentor, and support the EMC team with guidance on test setup and solution with any product.
• Troubleshooting all the issuable matters arising from the products so that the queries can be resolved. 
• Perform EMC testing and write reports for clients.
• Create new EMC specifications.
• Guide and advise the EMC team with efficiency on testing and report writing. 
• Analyze EMC data and communicate with OEMs during validation testing. 
• Provide leadership for the EMC lab in the absence of management.
• Keep EMC lab in line with A2LA accreditation 
• Update test software for any client needs 
• Provide consulting services to clients regarding EMC issues or testing.

Skills: Final Report Support, Team Mentoring and Guidance, Problem Troubleshooting, EMC Specification Creation, EMC Testing and Reporting, Data Analysis and Communication, EMC Lab Leadership, Test Software Updating

• Define, execute, and release the electromagnetic compatibility qualification plan associated with each project
• Define and supervise the qualification plan to verify safety, reliability, and correspondence to the specifications of each electronic product
• Ensure the correct execution of each EMC platform test by ensuring the quality of the results and compliance with the established deadlines
• Identify the critical issues associated with each project and actively contribute to the solution
• Supervise the execution of all EMC testing / electronic qualification activities
• Review the test reports ensure correctness and quality
• Issue, with the mandate of the Direct Manager, the test reports for the EMC platform
• Constantly supervise the state of efficiency of the EMC instrumentation through periodic checks
• Take care and manage any proficiency tests involving the EMC platform
• Check and ensure the constant updating of the list of available standards
• Promptly notify the laboratory management, the EPL Quality area, and the EPL Program Management area of ​​any introduction of new regulatory tests, communicating all the details and information necessary for implementation

Skills: EMC Qualification Plan Execution, Safety and Reliability Verification, Test Execution Supervision, Critical Issue Resolution, EMC Test Supervision, Test Report Issuance, EMC Instrumentation Maintenance, Standards Update Management

• Guide teams on good EMC design principles, specifically during schematic and layout review.
• Debug known EMC/EMI problems in the field, deep diving to root cause issues.
• Develop, review, and tailor EMI/EMC requirements to meet specific product performance goals.
• Creation of test reports, procedures, control plans, and guidelines.
• Work closely with the cross-functional team to ensure quality products and processes are developed and deployed.
• Engineering testing, characterization, and verification of EMC components
• Resolve safety and EMC issues that arise in real-time situations.
• Able to work independently and work as part of a team environment.
• Facilitate timely compliance approvals on all company’s products
• Assist and carry out safety testing, OTA antenna pattern testing
• Maintain a high level of diligence in documenting and carrying out activities under the rules of accreditation.

Skills: EMC Design Guidance, EMC/EMI Problem Debugging, EMC Requirements Tailoring, Test Report Creation, Cross-Functional Team Collaboration, EMC Component Testing, Safety and EMC Issue Resolution, Compliance Approval Facilitation

• Work with product managers and 3rd party test labs to follow up on compliance projects and able to schedule with test labs and follow up with them to update status.
• Set up and provide support to the hardware team and design team during the R&D process.
• Perform EMC/RF pre-test at headquarters lab or 3rd party lab.
• Do EMC debug at the test lab and report and document the failures.
• Be responsible for maintaining and developing global compliance such as FCC/ISED, CE etc.
• Maintain compliance documentation including reports and datasheets.
• Work with OEM clients and internal R&D groups to help with compliance certifications
• Work with and maintain a good relationship with local 3rd party test labs.
• Work with 3rd party lab to create test plans, request, review, negotiate, and accept quotes.
• Need to manage and support projects to prevent delays.
• Continuously develop and monitor compliance project processes to improve effectiveness and efficiency.

Skills: Compliance Project Management, R&D Support, Pre-Test Execution, Debugging and Documentation, Global Compliance Maintenance, Compliance Documentation Maintenance, Client Certification Support, Test Plan Development

• Perform EMC Testing as per various standards such as FCC Part 15B, EN 301 489, products covering ITE, WLAN, BT, GSM/UMTS/ LTE ( 2G, 3G, 4G), and other electronics products for the worldwide market access.
• Build and improve the testing capability for EMC measurements
• Perform in-house calibration of EMC sites, cables, et c., and help with lab maintenance
• Record test data, and prepare test reports and certification submittals.
• Perform annual site calibrations and assist in filing site listings and accreditations.
• Provide training to compliance testing team members on the latest EMC regulatory requirements.
• Provide sales support and customer services on product testing and or certification inquiries.
• Participate, understand, interpret, and tailor international product testing specifications, test methods, and certification procedures.
• Maintain and develop CAB – Conformity Assessment Body designations for worldwide markets
• Provide and present at Bureau Veritas Seminars for marketing purposes
• Act as Technical Resources for Bureau Veritas customers

Skills: EMC Testing Standards Application, EMC Measurement Improvement, In-House Calibration, Test Report Preparation, Annual Site Calibration, EMC Regulatory Training, Sales and Customer Support, International Specification Tailoring

• Oversee the planning and execution of EMC field testing both domestically and internationally
• Collaborate with and assist the Engineer of Record on Major Project commitments
• Collaborate effectively with peers and managers from other project disciplines to ensure that EMC requirements are achieved
• Perform site surveys, field testing and failure analysis with minimal oversight
• Assess the suitability of equipment for its intended application and perform gap analyses 
• Analyze field test and simulation results and advise on mitigations
• Develop bespoke test benches and automation software
• Develop standard operating and quality procedures in accordance with EXP Quality Management Systems
• Flexibility to work extended and unsocial hours, particularly when performing site-based activities
• Support the win-work team in the pursuit of new business opportunities
• Mentorship and development of emerging talent

Skills: Field Testing Oversight, Major Project Collaboration, Interdisciplinary Coordination, Advanced Failure Analysis, Equipment Suitability Assessment, Mitigation Advising, Test Bench Development, Quality Procedure Development

• Assist with the planning and execution of EMC field testing both domestically and internationally
• Contribute to the development of EMC Control Plans, EMC Measurement Plans, Measurement Reports, Hazard Analysis and System Requirement deliverables
• Perform site surveys and field testing
• Support the development of bespoke test benches and automation software
• Support the development of best practices to be incorporated into standard operating procedures
• Ensure EMC test equipment is in good working order and appropriately calibrated
• Support the win-work team in the pursuit of new business opportunities.
• Development, Support, and Execution of Electromagnetic simulations with tools such as CS Microwave Studio, Ansys HFSS, FEKO
• Analysis and preparation (in accordance with applicable Automotive standards) of test plans, test procedures, and test reports with analysis of impacts in terms of design and installation
• Analysis of electric and electronic schemes
• Development and application of EMC countermeasures on complex systems such as ships, aircraft, helicopters, automobiles, etc.

Skills: Field Testing Execution, EMC Control Plan Development, Hazard Analysis, Test Bench Development, Standard Operating Procedure Enhancement, Equipment Calibration, Business Development Support, Electromagnetic Simulation Proficiency

• EMC&ESD engineering experience in developing new products in the Notebook Industry
• Debug skills for product level & EMC&ESD-related issues.
• Familiar with 3rd party lab EMC&ESD test process to support the pilot run.
• Familiar with Notebook Architecture and EMI&ESD related Key parts(Absorber, TVS &bead and so on)
• Written and verbal communication skills in Business English
• Familiar with EMC/EMI regulations, such as IEC, CISPR, GB, etc
• Provide expert knowledge of EMC testing and standards.
• Expert understanding of EMC/EMI measurement equipment and techniques.
• Deep understanding of fundamentals of electromagnetics. 
• Knowledge of EMC best practices is desired.
• Strong Systems Engineering background

Qualifications: BS in Applied Mathematics with 8 Years of Experience

• Rich experience in EMC design, debugging, and certification, familiar with EMC theory
• Familiar with EMC test and with EMC test instruments
• Familiar with schematic and layout design, review and guide development team for EMC design
• Have a certain EMC simulation ability, and can use simulation to guide project design and risk assessment
• Experience in EMC design or test, familiar with application process of EMC country regulations, and test requirements. 
• Familiarity with CCC factory inspection
• Skill for technical communication and conference meetings in English.
• Familiarity with Server product design, system structure as well as specific EMC regulatory requirements.
• Familiarity with other compliance staff
• Strong interpersonal and communication skills both written and Verbal.
• Understanding and experience of test procedures and hands-on data analysis in a complex systems integration environment.

Qualifications: BS in Computer Engineering with 3 Years of Experience

• EMC design experience: PCB layout, connectors, and cable design
• Experience with EMI-EMC debugging and testing (Radiated/conducted Immunity and Emissions and ESD )
• Strong Electromagnetic (EM) theory basics, transmission line theory basics, and understanding of signal integrity basics
• Experience with lab equipment for debugging and testing: network analyzers, spectrum analyzers, signal generators, current probes
• Expertise with automotive EMC design and test, CISPR25, ISO 11452, ISO10605, GMW3097
• Expertise with CST or HFSS and ADS
• Expertise with wireless communication compliance, LTE, WiFi, Bluetooth
• Experience in GPS, cellular, Bluetooth and WIFI coexist testing
• Knowledge of the EMC collateral standard IEC 60601-1-2 and particular standard for IEC 60601-2-49
• Experience performing CISPR and IEC test methods

Qualifications: BS in Mechanical Engineering with 7 Years of Experience

• Experience with EMI/EMC debugging and test standards
• Familiarity with Cadence tools
• Strong Electromagnetic (EM) theory basics, understand signal integrity basics
• Experience in GPS, cellular, Bluetooth and WIFI coexist testing
• Experience with transmission line and antenna design
• Experience with RF lab equipment for device characterization and component/system performance validation, CMW, channel emulators, signal generators, network analyzers, signal analyzers
• EMC engineering experience in Electronic components/systems
• Experience with EMI / EMC pre-compliance and/or compliance testing
• Proven experience testing devices with wireless capabilities 
• Working knowledge of electronic measurement equipment including oscilloscopes, digital voltmeters, spectrum analyzers, measurement receivers, and network analyzers

Qualifications: BS in Systems Engineering with 6 Years of Experience

• Experience working in vehicle-level EMI/EMC programs
• High EQ and the ability to collaborate with others.
• Ability to run and support a complete EMI/EMC lab.
• Deep understanding of grounding, power, and RF vehicle architectures
• Experience working with metallic and non-metallic structures
• Experience with worldwide EMI/EMC standards
• Experience from Vehicle Level down to Component Level design practices
• Experience in an EMC Design and test role.
• Knowledge of Maritime systems, including radars
• Be able to work on the task associated with the overall function
• Knowledge of aircraft Avionic systems

Qualifications: BS in Physics with 13 Years of Experience

• Excellent knowledge of basic EE theory.
• Strong interest in working within the EMC field.
• Hands-on experience in operating EMC test equipment 
• Experience in using and writing EMC-test equipment software, like Labview, EMC32, Tile, Visual Basic, HyperLynx or Pads
• Experience in performing EN55013/20/22/24/32, EN61000-4-X tests 
• Excellent EMC problem-solving abilities using design and EMC experience.
• Ability to work independently and proactively.
• Must have a flexible style that accommodates working on multiple projects
• Prioritizing multiple tasks and demonstrating a strong commitment to team projects
• Excellent written and verbal English proficiency
• Excellent communication skills in the global organization 
• Excellent technical leadership skills to lead a small engineering team 
• Strong working knowledge of Microsoft Excel and Word applications.
• Experience with any facet of Audio systems 

Qualifications: BS in Electromagnetic Engineering with 3 Years of Experience

• Experience in Electrical commodity design and validation
• Experience with PCB layout and schematic review for EMC best practices
• Experience in Electrical commodity design and validation
• Experience conducting Radiated and Conducted Emissions testing
• Experience conducting Radiated Immunity testing
• NARTE Certified EMC Engineer
• Strong problem-solving skills leveraging applied electromagnetic theoretical concepts
• Knowledge of EMC design concepts.
• Must have demonstrated experience working with electrical test equipment including spectrum analyzers, vector network analyzers, and signal generators.
• A self-starter, motivated, and able to work independently with minimum supervision.
• Ability to plan, organize, prioritize, and finish tasks on time.
• Excellent communication skills are required, both written and verbal.

Qualifications: BS in Electronics Engineering with 11 Years of Experience

• Experience in EM simulation and/or measurement areas
• Knowledge of EM fundamentals, grounding, and shielding theory
• Familiar with PCB and flex design and manufacturing process
• Experience delivering a product into manufacturing
• Good system knowledge, such as PD structural and thermal solution, power regulator design and EMI control, RF Adsense, magnetics shielding, noise and vibration
• Goal-oriented, and a great teammate with good interpersonal skills and a strong work ethic.
• Prior project management experience.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form.
• Experience in EMC validation of electronic components/systems.
• Understanding of CISPR, ISO, SAE, FCC, and UNECE EMC standards and regulations.
• Experience in utilizing essential test equipment, such as Spectrum/Network Analyzers, Oscilloscopes, etc.
• Electronics design experience including PCBA layout.

Qualifications: BS in Electrical Engineering with 6 Years of Experience