DIGITAL DESIGN ENGINEER SKILLS, EXPERIENCE, AND JOB REQUIREMENTS

Published: Oct 25, 2024 - The Digital Design Engineer excels in programming and coding with advanced 3D CAD software such as Autodesk, CATIA, Rhino, NX, or PTC Creo, and is proficient in Microsoft Suite. Possesses experience in developing Generative or Parametric design platforms, blade or composite manufacturing, and working with electronic design automation tools. Expert in IC design and layout, FPGA development, and PCB design, using VHDL, Verilog, and SPICE modeling to challenge the status quo and drive innovation.

Essential Hard and Soft Skills for a Standout Digital Design Engineer Resume
  • VHDL
  • Verilog
  • SystemVerilog
  • FPGA Design
  • ASIC Design
  • Circuit Simulation
  • PCB Design
  • Signal Integrity Analysis
  • Power Analysis
  • Digital Signal Processing
  • Analytical Thinking
  • Problem-Solving
  • Team Collaboration
  • Communication
  • Attention to Detail
  • Adaptability
  • Time Management
  • Creativity
  • Critical Thinking
  • Continuous Learning

Summary of Digital Design Engineer Knowledge and Qualifications on Resume

1. BS in Electrical Engineering with 5 Years of Experience

  • Experience in the design of digital circuits as well as embedded System hardware, including
  • Experience with high-speed PC board layout with mixed-signal circuitry
  • Proficiency with lab instrumentation (scopes, DMM, logic analyzers, network analyzers, etc.)
  • Must be self-motivated, well organized, able to work in a group setting, and productive with minimum supervision
  • Excellent Quantitative Analysis, and verbal and written communication skills.
  • Experience implementing IEEE-1588 and SynchE client synchronization 
  • Experience with ARM general-purpose processors
  • Experience with TI Digital Signal Processing (DSP) chips/cores
  • Experience with Bus timing Analysis
  • Experience creating detailed documentation, especially for FPGA.

2. BS in Computer Science with 3 Years of Experience

  • Solid knowledge of analog and mixed-signal IC design fundamentals
  • Good problem-solving and debugging skills
  • Strong written and verbal communication skills
  • Proficient in both Vietnamese and English (Read and Write)
  • Self-motivated and able to work independently during high-pressure
  • Strong coding skills in Verilog/VHDL RTL and behavioral code, experience with System Verilog.
  • Experience with I2C, and SPI protocol.
  • Familiar with Linux Environment (including shell scripting and Linux gnu tools).
  • Scripting language experience (Perl, Python, TCL, etc.)
  • General knowledge of ASIC design methodology.
  • Experience with EDA tools for simulation and verification (VCS, Incisive).
  • Experience Synthesis, P&R, formal verification, and static timing analysis.
  • Knowledge of Design for Test (DFT) concepts.

3. BS in Computer Engineering with 6 Years of Experience

  • Expert in VHDL and Verilog using Cadence/Synopsys design flow
  • Experience with audio/video circuit design in 90nm or 180nm LDMOS technologies
  • Design experience in Bluetooth interface vis I2S
  • Experience running MatLab and Mathematica
  • Ability to create and present design reviews, test/characterization plans
  • Knowledge of CPLD & FGPA
  • Strong interpersonal, teamwork and communication skills including English fluency
  • Work effectively in a lab environment
  • Debug using emulation with combined FPGA and analog ICs.
  • Must have the ability to work with an oscilloscope, logic analyzer, power supply, and have soldering skills

4. BS in Mechanical Engineering with 2 Years of Experience

  • Expert in programming and coding using advanced 3D CAD software (Autodesk, CATIA, Rhino, NX, or PTC Creo) and fluent in Microsoft Suite
  • Experience developing Generative or Parametric design platforms 
  • Knowledge of blade or composite manufacturing 
  • A truly entrepreneurial spirit who is not afraid of challenging the status quo and think out of the box
  • Fluent in both oral and written English.
  • Experience working with electronic design automation tools 
  • Experience with IC design and layout software as well as VHDL, Verilog, and SPICE modeling and design 
  • Experience in the design of electronic circuits, FPGAs, PLDs, and PCBs
  • Able to develop complex FPGAs

5. BA in Industrial Design with 6 Years of Experience

  • Extensive experience with Xilinx FPGA logic and IP including the Xilinx Vivado development platform 
  • Knowledge of Python, C, C++, C#, embedded development, Windows development, .NET, Visual Studio, and Git 
  • Understanding machine learning algorithms and GPU processing and an interest in the general knowledge of electronics 
  • Hands-on working knowledge in embedded systems board-level programming, single board computers running a Linux operating system, and technical documentation/user guide writing for software and systems.
  • Advanced technical competency required in Computer Applications, Document Creation, and Math.
  • Experience with the latest commercial PowerPC, ARM, DSP, and GPU processors, high-speed PCB design 
  • Able to independently conduct feasibility studies and plan and execute new product development based on technical, budget, and schedule constraints
  • Able to troubleshoot complex prototypes and products
  • Able to mentor other engineers
  • Familiar with Altera and Altium design environments

6. BS in Electronics Engineering with 8 Years of Experience

  • Proven track record from digital Hardware (HW) design for 4G or 5G radios. 
  • In-depth knowledge of mobile networks, especially on 3GPP LTE 4G and 5G standards in RAN and the interface between the radio network and core network. 
  • Additional knowledge of the core network standards 
  • In-depth knowledge of reliability analysis. 
  • Knowledge of RF, mechanical and digital design and verification. 
  • Experience with various PCB/PWB materials and large multi-layer layouts 
  • FPGA design experience. 
  • Strong debug and HW/SW integration skills 
  • Experience in Voltage regulator design. 
  • Familiarity with electronics, PCB/PWB, and mechanical components supplier base and supply chain.
  • Deep knowledge of cost-efficient manufacturing technologies and methodologies.
  • Design Tools hands-on experience. 
  • Excellent interpersonal and leadership skills 
  • Outstanding verbal and written communication skills 
  • Ability to quickly grasp and adapt to new technologies and concepts. 
  • Experience in the telecommunication industry in design and systems engineering roles.

7. BS in Software Engineering with 5 Years of Experience

  • Experience with Verilog, and VHDL languages
  • Demonstrated working experience with Microsemi and Xilinx FPGAs
  • Demonstrated working experience with Microsemi Libero/Libero SoC and Xilinx Vivado development environments
  • Git version control system experience
  • Firmware custom build script experience
  • Issue tracking system experience (Atlassian Jira)
  • XML experience desirable
  • Python experience desirable
  • Experience with high-speed digital and analog circuit designs including designs with processors, FPGAs, memory, and industry interfaces (PCIe, Ethernet, I2C, and UART).
  • Experience in taking a design concept from the requirements level or block diagram to development of a complete hardware design, and verification via test and integration.
  • Proficiency in the use of Ecad Software. 

8. BS in Systems Engineering with 4 Years of Experience

  • Technical experience in digital system design Engineering
  • In-depth knowledge of Verilog RTL language
  • Deep understanding of the digital design flow from architecture, RTL design, verification, and synthesis
  • Understanding of control theory and discrete-time, z-domain, signal processing techniques
  • Familiarity with FIR and IIR filter design
  • Working knowledge of high-level modeling tools like Simulink, Matlab, or similar
  • Experience designing and verifying complex state-machines
  • Experience with mixed-signal design, simulation, and verification
  • Experience with back-end flow including synthesis, place, route, and timing analysis
  • Experience generating functional test vectors for PTE
  • Basic understanding of CMOS transistors
  • Audio experience

9. BS in Applied Physics with 2 Years of Experience

  • Experience in relevant technical disciplines
  • Experience in the design and development of state-of-the-art digital integrated circuits at the chip and device level
  • Intimately familiar with digital design tools (preferably Cadence)
  • Experience with low-level discrete circuits, FPGA/CPLD Verilog/VHDL design, and high-speed interfaces.
  • Experience designing and maintaining system Interface Control Documents (ICD).
  • Ability to work independently in a research environment
  • Ability to learn, understand, and implement new concepts
  • Strong lab and silicon validation skills
  • Strong oral and written communication skills

10. BS in Information Technology with 5 Years of Experience

  • Sound knowledge of microprocessor architecture and digital circuits
  • Must possess excellent verbal and written skills
  • Synopsys & Cadence tools experience
  • Scripting skills in any programming language (preferably Perl, TCL and Shell) 
  • Knowledge of UVM-based verification and code coverage 
  • Ability to troubleshoot and debug hardware control issues.
  • Ability to define critical project criteria to ensure timely completion.
  • Ability to draw solutions from both formal training and experience.
  • Ability to work independently and within a tight-knit team environment.

11. BS in Electrical Engineering with 2 Years of Experience

  • Experience developing analog and digital electronic systems.
  • Experience in FPGA/CPLD design and VHDL/Verilog coding for embedded applications.
  • Experience in embedded firmware development using C/C++ & Assembly language for microcontrollers.
  • Experience using FPGA development tools.
  • Experience using MATLAB for state machine development and code generation.
  • Proficiency at solving problems in a timely manner.
  • Ability to appropriately apply engineering principles and concepts to the area of embedded control.
  • Ability to follow company procedures and work instructions.
  • Experience in an RF/analog hardware environment is highly desirable.
  • Experience with embedded control design and coding for the defense industry is highly desirable.
  • Experience with Agile software development and Git is desirable.
  • Experience with signal processing

12. BS in Computer Science with 3 Years of Experience

  • Must have experience in developing and implementing programmable logic/software architectures that meet customer and internal requirements
  • Must possess an understanding of digital hardware designs including review of datasheets, working from schematics, and using other design artifacts
  • Must have a strong background in programmable logic (VHDL) and digital design
  • Experience in software development in C
  • Experience developing for Xilinx FPGAs and use of Xilinx development toolchains 
  • Familiar with common development tools including compilers, debuggers, digital o-scopes, MS Office, Visio, and software configuration management/version control
  • Must be able to pass a drug test
  • Experience developing for Linux and/or RTOS environments
  • Experience in the development of embedded RF products 
  • Experience in schematic capture/hardware design

13. BS in Computer Engineering with 5 Years of Experience

  • Experience with High gate count FPGAs 
  • VHDL programming experience with FPGAs 
  • Experience with IP Core integration into FPGAs 
  • Experience with FPGA synthesis, mapping to target FPGA devices, and timing analysis 
  • Experience in communications and signal processing background desired.
  • Experience with high-speed communication interfaces desired.
  • Experience with embedded microprocessors within FPGAs desired.
  • Experience developing FPGA test benches for test/validation purposes desired.
  • Familiar with Xilinx Development Tools (ISE Design Suite, Vivado Design Suite, and System Generator for DSP) desired.
  • Hands-on laboratory experience 
  • Experience with Logic Analyzers and Oscilloscopes is vital.
  • Familiarity with MATLAB and Simulink (HDL Coder) is desired.
  • Experience with configuration management tools (Perforce experience desired).
  • Experience with Atlassian tools desired (Jira, Confluence)

14. BS in Mechanical Engineering with 2 Years of Experience

  • Expertise in Place and Route tools (Cadence Innovus, Synopsys ICC2).
  • Preferably on multi-million gate designs in small node technologies (16nm and smaller) and using Low power design techniques (UPF)
  • Experience with complete digital design flow and design tools (Synthesis, Static Timing Analysis, DFT, Logic Equivalence Checking, ATPG, Place and Route …) from EDA vendors such as Cadence, Mentor, Synopsys …
  • Experience with Linux as a user environment
  • Having experience with revision controlled development environments (SVN, Cliosoft) 
  • A team player with excellent communication skills verbal and written
  • Fluent in English.
  • Experience with closing timing and meeting power consumption goals in large designs in advanced technology nodes (sub-10nm geometries).
  • Scripting language experience such as Python, Perl, TCL, etc. 
  • Debugging experience in simulation, emulation, and system bring-up in collaboration with Verification, Emulation, Physical Design, Firmware teams, etc.

15. BA in Industrial Design with 5 Years of Experience

  • Experience with Embedded and Hardware Design
  • Experience with ASIC Design, Simulation, and Modeling
  • Experience with FPGA programming (VHDL, Verilog)
  • Experience with asynchronous gate design for improved radiation hardening
  • Self-motivated yet able to work well within a development team
  • ASIC design experience with Mentor, Cadence, or Tanner toolsets and VHDL or Verilog simulation and design.
  • Experience with cryptographic implementation and RISC-V-based architectures
  • Solid background in ASIC design methodology
  • Familiarity with ICCompiler2, Design Compiler, Primetime, and Formality

16. BS in Electronics Engineering with 15 Years of Experience

  • Experience in delivering complex electronics
  • Experience in leadership experience
  • Familiar with High speed, high-power design rules
  • Excellence in high reliability and safety-critical systems.
  • Technical excellence in Functional Safety and work product delivery
  • Experience Developing And Leading Other Multidisciplinary Engineers
  • Understanding of Engineering Workflows and process
  • Knowledge of RTL, SKILL, and TCL is advantageous
  • Analytical thinking and structured problem-solving skills
  • Fluent English skills
  • Familiarity with the Cadence Design Framework

17. BS in Software Engineering with 3 Years of Experience

  • A thorough understanding of digital logic design
  • Familiarity with the Verilog language and simulators
  • A good understanding of analog functionality and exposure to analog IC design methods
  • Ability to solve problems using a systematic approach
  • Experience with System Verilog
  • Demonstrated strong analytical and problem-solving skills
  • Strong verbal and written communication skills
  • Ability to work in teams and collaborate effectively with people in different functions
  • Strong time management skills that enable on-time project delivery
  • Demonstrated ability to build strong, influential relationships
  • Ability to work effectively in a fast-paced and rapidly changing environment
  • Ability to take the initiative and drive for results

18. BS in Systems Engineering with 4 Years of Experience

  • Deep understanding of the digital design flow from architecture, RTL design, verification, and synthesis
  • Familiarity with control theory and discrete time, z-domain, and signal processing techniques
  • A working familiarity with finite-state machine design
  • Strong oral and written communication skills
  • Previous commercial IC design experience
  • Experience building high-level models in tools like Simulink, Matlab, or Python
  • Experience designing FIR and IIR filters
  • Expertise with mixed-signal design, simulation, and verification and familiarity with back-end flow including synthesis, place and route, and timing analysis
  • Experience generating functional test vectors for Production Testers
  • Basic understanding of CMOS transistors and logic gates
  • Lab measurement and silicon validation skills

19. BS in Applied Physics with 2 Years of Experience

  • Experience with electronic system design, circuit theory, microprocessors, FPGAs, high speed digital design, HDMI, circuit design and simulation tools.
  • Understanding of mechanical engineering concepts with the ability to read and analyze mechanical drawings.
  • FPGA programming experience
  • Design/development engineering experience, preferably in the military or aerospace industry.
  • Experience with high-speed digital and analog circuit designs including designs with processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, and UART.
  • Experience in taking a design concept from the block diagram or requirements level to development of a complete hardware design, and verification via test and integration.
  • A basic understanding of CMOS transistors
  • Proficiency in the use of Ecad Software. 

20. BS in Information Technology with 5 Years of Experience

  • Experience in digital system design
  • In-depth knowledge of Verilog RTL language
  • Proficient knowledge of digital design flow from architecture, RTL design, verification and synthesis
  • Expertise in control theory and discrete time, z-domain, signal processing techniques and a working familiarity with FIR and IIR filter design
  • Working knowledge of high level modeling tools like Simulink, Matlab, or similar
  • Experience designing and verifying complex state machines that are incorporated into mixed signal designs
  • Experience with UVM verification
  • Expertise in mixed-signal design, simulation, and verification
  • Experience with back-end flow including synthesis, place and route, and timing analysis
  • Experience generating functional test vectors for PTE

21. BS in Electrical Engineering with 4 Years of Experience

  • Strong coding and documentation practices.
  • Ability to own and drive either design or verification assignments to completion with little supervision
  • Working experience with custom digital interfaces (I2C, SPI, UART, etc.).
  • Design experience with custom state machines and control logic for use with analog circuits such as linear regulators, buck converters, and data converters.
  • Knowledge of advanced complex IC verification techniques (SystemVerilog/Universal Verification Methodology).
  • Ability to collaborate in a team environment.
  • Good English communication skills
  • Strong lab and silicon validation skills
  • Strong verbal and written communication skills
  • Experience in managing schedule and resources to meet assigned milestones.

22. BS in Computer Science with 3 Years of Experience

  • Team-oriented, customer-oriented, quality-conscious
  • Experience in digital design focused on automotive products. 
  • Being familiar with Automotive developments, scripting in Python or BASH
  • Experience in verification flows 
  • Basic knowledge of IC circuit digital and semiconductor technology
  • Good spoken and written English skills
  • Solid knowledge of digital design building blocks (Data-path, Filters, FIFO...)
  • Strong skills in Verilog RTL coding, verification, and debugging.
  • SOC/FPGA design/validation experience
  • Experience in digital signal processing design 
  • Familiar one of the following is a plus, USB/SDIO/Audio
  • Familiarity with System-Verilog language

23. BS in Computer Engineering with 5 Years of Experience

  • Experience in high-speed digital design.
  • Experience in schematic and layout tools.
  • Strong skills in written and oral communication
  • Knowledge of communication system fundamentals.
  • Teamwork, enthusiasm, and self-motivation.
  • Proficiency with simulation tools
  • Proficiency in block diagrams of communication systems
  • Measurement experience in one or more of the following areas: oscilloscopes, logic analyzers, signal analyzers, signal generators, phase noise analyzers, and vector network analyzers.
  • Experience in digital design (Verilog / System Verilog)
  • Solid Linux skills and experience in scripting languages (e.g. Python) 

24. BS in Mechanical Engineering with 6 Years of Experience

  • Experience in ASIC design, verification, or related work experience.
  • Experience in digital ASIC design.
  • Demonstrable knowledge of Bluetooth, BT Low Energy, 15.4, NFC, or similar wireless communication systems, including protocol layer, modem, and radios.
  • Knowledge and working experience on WIFI/LTE/Bluetooth coexistence 
  • Knowledge of signal processing techniques used in RF communications.
  • Familiarity with FPGA-based emulation platforms.
  • Demonstrable expertise in implementing complex multi-domain synchronization and pipelining design techniques
  • Experience in C/C++ and embedded software development 
  • Team-oriented style of work
  • Good communication skills, fluent in German and English
  • Knowledge of high-speed serial data communication 

25. BA in Industrial Design with 6 Years of Experience

  • Knowledge of standard methodologies with respect to implementation of digital logic
  • Understanding of digital design flow including RTL simulation, CDC, logic synthesis, timing constraints, timing closure, STA, back annotation of parasitics, gate level simulation, equivalence checking
  • Have experience with Digital interface implementations
  • Ability to write assembly level code and higher-level code
  • Comfortable with analyzing a design and partition between HW implementation and SW control
  • Excellent written and verbal communication skills
  • Ability to work well with international teams, take ownership, and empower self and others
  • Experience with analog and RF circuit design from baseband through X-band.
  • Knowledge of a scripting language such as Python.
  • Knowledge of SystemVerilog 
  • Previous experience with spacecraft systems
Relevant Information
Digital Communications Coordinator Skills, Experience, and Job Requirements
Digital Communications Manager Skills, Experience, and Job Requirements
Digital Account Executive Skills, Experience, and Job Requirements
Digital Account Manager Skills, Experience, and Job Requirements