• Prototype assembling, disassembly, installation, removal and/or teardown of test objects to support testing activities in test cells and vehicles both in the laboratory and in the field.
• In cooperation with the design department, I will contribute to the development of instructions and methods for test object assembly and disassembly.
• Respond to the development of components, and participate in the preparation, duration, completion, and post follow-up of the test.
• Involvement with mechanical expertise in installations in various applications.
• Stop and intervene in case of safety matters for people, facilities or equipment.
• Perform or contribute to procedures, training or technical instructions.
• Working knowledge of environmental policies and procedures per ISO 14001 and ISO 9000.
• Repair heavy trucks and heavy equipment
• Perform scheduled preventative maintenance
• Use diagnostic tools to test vehicle components
• Perform quality inspections

Skills: Prototype Assembly, Collaborative Development, Mechanical Installation, Safety Intervention, Training Development, Environmental Compliance, Heavy Equipment Repair, Preventative Maintenance

• Removing and dismounting Tire/wheel
• Collecting and proper handling of fluids
• Perform minor mechanical duties, such as dismantling front and rear axle assemblies and removing batteries from vehicles
• Processing radiators for recycling
• Perform inventory control and operate forklift
• Utilize an acetylene torch or plasma cutter
• Test trucks and identify working parts
• Utilize air impact gun and Torx bits
• Repair and maintenance of equipment and vehicles for Tree Care Service.
• Maintain stock of products needed to handle normal maintenance and repair needs.
• Assist in training field crew on equipment maintenance and vehicle operations.
• Operate equipment in a safe manner.

Skills: Tire/Wheel Removal, Fluid Handling, Minor Mechanical Duties, Radiator Processing for Recycling, Inventory Control, Torch and Cutter Utilization, Truck Testing and Diagnostics, Equipment Repair and Maintenance

• Perform all diagnostic and repair work within the company safety policies
• Troubleshoot and diagnose cause of failure of engine
• Observe and identify developing issues of engine
• Perform tune‐ups and injector replacements
• Perform overhauls and cylinder head replacements
• Replace gaskets and hoses (oil, fuel, water)
• Remove and install generators or engines
• Remove and install turbo’s, intake and exhaust manifolds, and remaining engine trim components
• Perform preventive and minor corrective maintenance
• Use hand and power tools safely and efficiently
• Use special tools and measuring instruments associated with engine repair

Skills: Diagnostic and Repair Work, Engine Troubleshooting, Issue Observation and Identification, Tune-Ups and Injector Replacements, Engine Overhauls and Cylinder Head Replacements, Gasket and Hose Replacement, Generator and Engine Installation, Preventive Maintenance

• Work in a safe manner following all rules and regulations.
• Efficiently perform machinery maintenance and repairs in the shop and/or field.
• Efficiently troubleshoot problems using technical databases and resources.
• Communicate with manufacturers using phone and computer programs.
• Fully and accurately document work descriptions and all necessary information by way of writing on paper and/or typing it into a computer.
• Navigate windows based electronic service manual, wiring diagrams, hydraulic schematics, and parts catalog.
• Notice customer urgency and react accordingly to needs.
• Build a cost estimate to complete the job if needed.
• Fully follow the dealership and manufacturer service guidelines.
• Fill out parts requisitions for necessary parts.
• Clean up area using brooms, detergents and water hoses.

Skills: Safety Compliance, Machinery Maintenance and Repair, Troubleshooting Proficiency, Manufacturer Communication, Work Documentation, Service Manual Navigation, Customer Urgency Awareness, Cost Estimation

• Perform preventative and routine maintenance on trailers or trucks such as changing oil, changing and rotating tires and tire repair, PM Services, air and hydraulic brake repairs, checking fluid, trailer back door replacements, changing or installing door seals, installing tracking devices, warranty procedures, driveline, steering & suspension, electrical troubleshooting, and A/C repair work.
• Maintain the cleanliness of the work area.
• Troubleshoot and repair fleet vehicles and equipment
• Program and record assigned preventative maintenance tasks
• Assist in the education of the Route Sales Representatives’ pre and post-trip inspections
• Receive and process invoices for payment
• Act as vendor billing point of contact
• Maintain parts inventory and budget
• Maintain work area ensuring organization and cleanliness
• Ensure safe work practices
• Reporting on possible defects and planning the action required
• Rectify the risks or defects identified

Skills: Preventative Maintenance, Vehicle Troubleshooting and Repair, Fleet Maintenance Management, Parts Inventory Management, Vendor Communication, Safety Compliance, Work Area Organization, Defect Reporting and Rectification

• Maintain a clean, safe work area in compliance with Corporate/OSHA Standards, and perform all work in accordance with established safety procedures.
• Perform preventive maintenance inspections and effectively repair of any problems identified during an inspection.
• Perform proficient inspection, diagnosis and moderately complex repair of assigned vehicles and equipment.
• Provide assistance, guidance and direction to other maintenance personnel.
• Use vehicle computer electronics systems to interpret failure modes to initiate or assign repairs.
• Estimate time and material costs on repairs and requisitions new parts.
• Advise the supervisor immediately if additional work is needed or if repairs cannot be completed within the Standard Repair Times (SRTs).
• Inspect the quality of outside/supplier repairs and or rebuilds. 
• Assesses structural damage and assigns needed repairs utilizing the most appropriate method(s).
• Perform service calls for emergency breakdowns.
• Conduct safety checks on vehicles. 
• Performs maintenance-related work

Skills: Safety Compliance, Preventive Maintenance Inspections, Vehicle Inspection and Diagnosis, Guidance and Direction to Personnel, Vehicle Electronics Systems Proficiency, Cost Estimation for Repairs, Quality Inspection of Repairs, Emergency Breakdown Assistance

• Able to perform preventative maintenance on any make and model
• Diagnostic and repair skills on engines and transmissions
• Able to use computer diagnostics (DDE, Cummins, Isuzu, Hino, Etc)
• Able to diagnose and repair air & hydraulic brake systems
• Proficient removal and replacement of truck/trailer components
• Competent with cooling systems
• Knowledge of EGR and DPF systems
• Experience with all makes & models of trucks & engines
• Experience with Liftgates & Reefers
• Ability to read and comprehend instructions
• Ability to report to the branch and/or locations in the field in a timely manner with a professional appearance
• Ability to use a laptop to diagnose mechanical issues

Qualifications: BA in Diesel Mechanics with 2 years of Experience

• Diesel engine troubleshooting skills with various engine manufacturers
• Experience with basic fabrication, use and application of welders and gas torch systems
• Experience performing preventative maintenance
• Able to work both independently and as part of a team
• Excellent written and verbal communication skills
• Ability to work in extremes of hot and cold weather and wet environments
• Able to work varying start times including weekends
• Completion of a Diesel Technician school program
• Certifications highly preferable such as ASE
• Able to provide own tools
• Ability to pass pre-employment and random drug screening
• Able to perform the physical demands of the job

Qualifications: BS in Automotive Engineering Technology with 3 years of Experience

• Basic understanding of electricity, math skills, read/write/speak English.
• Previous mechanical experience highly preferred but willing to train.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
• Ability to write routine reports and correspondence.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Experience and knowledge working with heavy duty diesel equipment.
• Capable of test-driving equipment to confirm repairs.
• Capable and willing to work overtime, Saturdays and some varied shift starts
• Good communication skills
• Ability to service and diagnose brakes.
• Ability to service and diagnose diesel trucks, (tractor/trailers) and power-train mechanics.

Qualifications: BA in Mechanical Engineering with 3 years of Experience

• Ability to perform Federal Annual Inspections
• Ability to repair trucks independently, while also being able to work in a team environment
• Solid understanding and adherence to safety and environmental standards
• Demonstrated ability to work cohesively as part of a team
• Well-developed communication and interpersonal skills
• Able to comply with all OHS policies and procedures.
• Ability to pass a background check and drug screen
• Committed to working safely at all times including a commitment to the policies and procedures of the operation
• Knowledge of Diesel Engine and Hydraulic System diagnostics and preventive maintenance
• Knowledge of DOT rules and regulations
• Experienced in heavy diesel engine diagnostics and repairs
• Good manual dexterity, including the ability to make precise finger movements and the ability to keep arms and hands steady.

Qualifications: BS in Heavy Equipment Maintenance with 2 years of Experience

• Ability to troubleshoot and perform hydraulic system repairs.
• Knowledge of truck air brake systems with the ability to diagnose and repair problems.
• Ability to repair suspension and steering system.
• Ability to troubleshoot and repair electrical systems.
• Ability to perform specialized component repair such as hydraulic and mechanical drives.
• Ability to make minor repairs including welding and cutting.
• Ability to perform and track Scheduled Maintenance in accordance with Hanson’s PM Program.
• Ability to perform road calls in a safe, fast and professional manner
• Knowledge of OSHA regulations and safety orders, including safety precautions on raised truck beds, brakes, mixer lockouts, etc.
• Ability to keep company records and complete work orders on equipment.
• Working knowledge of the systems and components listed above
• Experience dealing with parts and service vendors
• Experience in maintaining vehicle maintenance records, state inspections and P.M scheduling

Qualifications: BA in Industrial Technology with 3 years of Experience

• Ability to work within a fast-paced environment
• Good written and verbal communication skills
• Previous diagnostic investigation experience
• Be a team player, open and honest who consistently delivers an exceptional customer service experience
• Hold a flexible approach to business commitments
• Understanding of air brake systems and basic hydraulics
• Flexibility and the ability to adapt to change
• Basic welding and light fabrication skills
• Basic computer skills, such as the ability to enter maintenance data on a workstation, etc.
• Ability to use accurately and effectively computerized diesel & gasoline engine diagnostic equipment
• Compliance with all OSHA and/or MSHA regulations

Qualifications: BS in Agricultural Mechanics with 2 years of Experience