• Program and set-up CNC machine for production runs.
• Ability to troubleshoot and document machining problems.
• Detect and report defective materials or questionable conditions to management.
• Re-sharpen and re-set cutting tools.
• Ability to read blueprints and interpret geometrical tolerances.
• Perform inspection of machined products, including documentation of results.
• Complete and maintain paperwork for parts.
• Experience setting up and/or Running CNC Haas vertical Mills or Lathe
• Check and maintain machinery daily to ensure functionality
• Maintain work area and equipment in a clean orderly condition and follows prescribed safety procedures

Skills: CNC Programming, Machining Troubleshooting, Defect Reporting, Tool Resharpening, Blueprint Interpretation, Product Inspection, CNC Operation, Machinery Maintenance

• Determine optimal programming methods, machine tool selection and machine methods to produce parts with the most effective machine time and material conservation.
• Lead implementation of new operating procedures relative to the NC/Laser/RAS programming group.
• Responsible for the maintenance of program readouts and drawing files.
• Review engineering production drawings for accuracy and informs engineering of suspected errors or potential part geometry improvement.
• Write NC turret press, laser, and RAS programs.
• Support running NC/Laser/RAS equipment.
• Create nesting files for the laser machines and makes sure that the reports and all NCP files are available for the laser operators.
• Order supplies for production of NC/Laser/RAS programs and trains other individuals within department.
• Inform individuals who input part routings as to what mac hine parts will be produced on.
• Draw parts out in 2D/3D when only PDF prints are provided or no prints provided.
• Utilize SAP to provide operators to continue workflow through the shop.

Skills: Optimal Programming, Machine Tool Selection, Procedure Implementation, Program Maintenance, Drawing Review, NC/Laser Programming, Nesting File Creation, SAP Workflow Management

• Use CAD/CAM software systems such as NX (Unigraphics), Edgecam, Mastercam, Tebis and Vericut to create CNC programs for multi-axis CNC milling machines and vertical and horizontal CNC lathes.
• Developing programs in a timely manner to support production, specifying tooling, resolving shop machining issues, and monitoring active jobs
• Select appropriate cutting tools and associated speeds and feeds to meet both quality and cycle time targets
• Responsible for process improvements based on newer technology cutting tools as well as improved toolpathing
• Ensures adherence to applicable MB Aerospace internal, federal, state and local laws and regulations related to compliance and takes responsibility to ensure ongoing conformity with such rules and regulations
• Program CNC lathe, vertical, horizontal and 5th axis multi pallet machines with no supervision using Surfcam and/or Fusion 360 CAM software
• Manage and instruct setup operators to properly run programmed parts
• Recognize trends in machine performance and ability to make necessary adjustments to maintain stringent part requirements
• Purchase machine materials and parts/tools to maximize quality and minimize down time
• Schedule jobs to achieve on-time delivery, quality and profitability goals
• Make suggestions for improvement in areas of cost reductions, processes, quality and productivity
• Responsible for all equipment maintenance and repair management
• Works with all shop departments to ensure efficient workflow through open and clear communication

Skills: CAD/CAM Software, CNC Programming, Tool Selection, Process Improvement, Regulatory Compliance, Operator Management, Machine Adjustment, Equipment Maintenance

• Ability to understand, set up, and operate at the highest level, various conventional machines for the production of all filtration products
• Maintain quality of part size (s) and finish
• Ability to read and interpret blueprints
• Ability to make fixtures and tolling for various conventional machines
• Comply with standard work practices and SOPs
• Meet quality expectations, inspect work for conformance, initial and date Shop Tags
• Segregate nonconforming or suspected nonconforming material in real-time and notify the supervisor
• Perform minor machine maintenance
• Keep area organized and clean
• Comply with all EHS and Personal Protective Equipment (PPE) policies and procedures
• May serve as a resource to others in the resolution of complex problems and issues

Skills: Machine Operation, Quality Maintenance, Blueprint Reading, Fixture Creation, SOP Compliance, Work Inspection, Machine Maintenance, EHS Compliance

• Develops, revises and updates scripted programs and set up sheets, and recommends appropriate tooling for numerically-controlled production equipment.
• Works from Engineering drawings, sketches and CAD/CATIA files to plan sequence of work and operations to manufacture parts to blueprint specifications.
• Monitors CNC equipment organization and maintenance needs, assists in ordering CNC operating supplies, and provides process improvement input to the area Supervisor.
• Sets up and operates equipment in assigned area, inspects assigned work, and routes parts using material handling equipment.
• Expected to continually upgrade programming knowledge for self-development within the role.
• Achieves and maintains quality and productivity standards, maintains acceptable dependability level, and follows established safety guidelines.
• Capable of reading and understanding blue-prints, drawings, sketches, specifications.
• Working knowledge of processes and needed parameters for the efficient machining of materials including proper speeds, feeds, depth and angle of cuts when working with aluminum and steel for internal manufacturing use.
• Prepare and load raw materials and parts onto the machines
• Prepare and operate CNC machines to perform tasks such as milling, turning, drilling, tapping, de-burring and sawing etc.

Skills: Scripted Programming, Tooling Recommendation, CAD/CATIA Proficiency, CNC Equipment Maintenance, Equipment Setup, Quality Standards, Blueprint Reading, Material Machining

• Ability to perform well in high-pressure situations
• Must be self-motivated and able to follow written and verbal instructions.
• Excellent communication skills both written and verbal
• Must be adaptable to a changing work environment, competing for demands, and is able to deal with frequent change, delays, or unexpected events.
• Must be willing and able to work flexible shifts and changing work schedules.
• Meets expectation rating for relevant competencies.
• Experience in programming machine or combination of education and experience.
• Good understanding of drafting, dimensioning and tolerances
• Excellent setup skills and knowledge of best practices (including tooling and fixturing)
• Able to trouble shoot problems and problem solve with minimal supervision
• Able to use all shop inspection tools to inspect finished parts as tight as +/- .002 ensuring company quality standards are kept

Qualifications: BS in Mechanical Engineering with 4 years of Experience

• Surfcam and/or Fusion 360 CAM software experience
• Experience reading and writing G-Code
• Experience and knowledge of the capabilities and differences of various CNC Machines and their controls
• Familiarity and skill with interpreting technical drawings and blueprints
• Knowledge of cutting aluminum and stainless steel
• Ability to use measuring instruments such as calipers, micrometers, indicators
• Knowledge of tool holders, cutting tools, fixtures, speeds, and feeds
• Complies with established safety directives and protocols
• Strong work ethic and team player
• Able to set up and maintain a well organized, safe, and clean environment
• Excellent customer focus with a high sense of urgency
• Ability to function calmly in a fast-paced environment managing multiple priorities simultaneously
• Able to positively manage situations of a dynamic nature, to be able to modify plans, actions, and decisions in light of changing situations and circumstances while still meeting, or proposing modified, deadlines

Qualifications: BS in Manufacturing Engineering with 5 years of Experience

• Related experience programming multi-axis machines
• Computer proficiency with Mastercam software
• Knowledge of electronics and machine tools. Small machine shop work experience.
• Ability to use drafting and/or modeling software (AutoCAD SolidWorks)
• Strong experience in milling machine programming, ideally familiar with Heidenhain and Fanuc control systems, as well as FeatureCAM programming software, however equivalent experience also considered.
• Key knowledge of aluminum machining, including suitable parameters and tooling very important, as well as knowledge of other materials and general best practices in milling.
• Complete operations launch requirements including modeling, programming, creation of process drawings, and design of process & measurement fixtures/aides.
• Ability to read engineering and manufacturing drawings
• Estimate production times and fixture requirements and related costs in order to provide the information needed for management decisions.
• Knowledge of CNC Programming System woodWOP, or AlphaCam, Controls and Instrumentation, Supply Management, Tooling, Coordination, Inventory Control,

Qualifications: BS in Industrial Engineering with 7 years of Experience

• Past experience CNC machining processes 3-5 axis (HMC & VMC and Mill turning.)
• Proven Experience and proficiency in CAD / CAM software. (Solid Works/Cam Works).
• Proven experience in identifying tooling, along with the appropriate operating conditions (speeds & feeds), process steps and fixture requirements to machine product in a safe, quality focused, process controlled and cost effective manner.
• Experience in specifying optimum cutting tool parameters. Preferred experience in applying carbide and/or ceramic tooling cutting parameters on Aluminum, Stainless Steels, Carbon Alloy steels, and Ductile & Gray Iron castings.
• Experience working with cutting tool vendors to specify and apply new and existing technology to create productivity gains.
• Experience with Multi Pallet Horizontal systems a plus. Experience with HAAS, FANUC, and Makino and Mori-Seiki controls (Fanuc based).
• Demonstrated examples of successful cycle time/cost reduction efforts.
• Comfort working in an ISO environment with focus on Medical, Aerospace or other industry with high process standards.

Qualifications: BS in Robotics with 3 years of Experience

• Knowledge of Machining G & M Code necessary
• Knowledge of GD&T necessary
• General Understanding of CNC Machine Operation/Setup is recommended
• Assist in the compiling of data to support quotations.
• Materials are high-technology aerospace materials including aluminum, magnesium, titanium, Inconel, and stainless steel
• Working knowledge of post processor development
• Familiarity with on machine probing and tool offset systems
• Comfortable with working with various types of machine controls
• Ability to assist with root cause / corrective action activities
• Knowledge of macro programming a plus

Qualifications: BS in Mechatronics Engineering with 2 years of Experience