• Able to receive and carry out written and verbal instructions
• Work in a safe manner at all times, reporting any potential safety hazards to the supervisor.
• Keep the profiling machine output at the optimum level.
• Ensure cutting time is kept to a maximum.
• Keep material wastage to a minimum.
• Check the correct marking of the parts, with reference to the nests.
• Record the correct details on the nesting paperwork.
• Monitor the accuracy of the profile machine and alter
• Monitor the cut quality of the profile cutter and alter
• Carrying out scheduled maintenance of the profiling machine.
• Responsible for filling out the maintenance log. 

Skills: Instruction Compliance, Safety Adherence, Machine Optimization, Efficiency Maximization, Accuracy Monitoring, Profile Machine Accuracy, Scheduled Maintenance, Quality Assurance

• Prioritize and manage multiple jobs in a fast-paced working environment
• Use of hand and power tools to assemble playground panels
• Daily routine machine and tool maintenance
• Load and unload components from CNC machines.
• Route and finish equipment to print on CNC and plasma tables
• Assist other team members with lifting and moving heavy parts continually throughout the day.
• An understanding of operating complex machinery
• Read and follow specific work instructions of assembly requirements.
• Quality control technician for completed play panels and components
• General cleaning of the work area, including work surfaces, equipment, and floors.
• Give progress updates to the manufacturing manager daily

Skills: Job Prioritization, Tool Proficiency, Maintenance Expertise, CNC Operations, Team Collaboration, Machinery Operation, Quality Control, Workplace Cleanliness

• Using the extensive CNC Operating experience (including setting and optimizing the machine)
• Working with mild steel, stainless steel and galvanized steel is important.
• Pass maintenance log for checking each week.
• Maintain a working relationship with the CNC Nester to assure adequate feeds and speeds of the profiling machine.
• Material Handling Load and unload router table. 
• Place remnants in and out of racks for proper storage.
• Keep all plate labeled to the appropriate vessel. 
• Tracking PO number, heat or lot number, and thickness of the plate.
• Adhere to all Risk Assessment requirements for the equipment being used.
• Consistently deliver acceptable parts in the time allowed.
• Demonstrate the knowledge and ability to maintain cutting tool accuracy
• Contribute to Tool Box talks and other communications.

Skills: CNC Operation, Steel Handling, Maintenance Logs, Nester Collaboration, Material Loading, Proper Labeling, Risk Adherence, Tool Accuracy

• Support foundry management 
• Operating complex drilling, turning and lathing machines as well as operating various CNC machine tools and performing multiple machining and cutting operations, including machinery with bar feeders.
• Use precision measuring instruments for inspection of machined parts. 
• Maintaining tolerances and drawing requirements and adjusting CNC equipment
• Give priority to safety (OSHA, PPE, Layered audit, accident prevention, accident/near miss investigation and reporting)
• Examine quality process by keeping in compliance with instruction and correcting 
• Identifies, deploys, and properly uses inserts, fixtures and tooling
• Conduct regular cleaning of CNC machinery
• Manage and controls resources to reduce/reuse waste or excess
• Assist in keeping inventory of play components and overall schedule of projects.
• Maintain an inventory of utilized tools and equipment

Skills: Foundry Support, Machine Operation, Precision Inspection, Tolerance Maintenance, Safety Compliance, Quality Assurance, Tool Management, Inventory Control

• Performs machine start-up
• Performs Part Inspection (in process) Performs Machine Tool Changes Performs Machine Shut-Down
• Assists in all machine services (Coolant, Cleaning, etc.).
• Maintain production banks as required when necessary.
• Report to his or her Supervisor the existence of any hazard of which he or she is aware.
• Must adhere to all safety policies
• Ensures work area is clean by using good housekeeping practices and 5S initiatives.
• Completes all supplied documentation for the quality system on a daily basis including worksheets, logs, etc. and white time slips for management
• Ensures that lock out procedures is being followed.
• Ensures that all TS16949 and ISO14001 procedures are being followed.

Skills: Machine Start-Up, Part Inspection, Tool Changes, Machine Shut-Down, Service Assistance, Production Maintenance, Safety Reporting, Documentation Completion

• Required to operate multiple machines simultaneously
• Ability to selects set-up of appropriate tooling & fixtures
• Troubleshoot current programs and performs significant editing of current programs
• Perform inspections on own work & co-worker’s work
• Able to make adjustments to assure dimensions tolerances, quality and highest accuracy of parts
• Able to run and setup all machines in department
• Motivated and works on continuous improvement including processes, productivity, quality, and safety.
• Good technique and use of measurement tools i.e. snap gage, micrometers, digital caliper, optical comparator, and etc.
• Good use and understanding of QMS, MAX & SPC data bases
• Performs preventative maintenance on equipment including top-off lubricants

Qualifications: BS in Mechanical Engineering with 4 years of Experience

• Helps establish procedures as well as follows quality and safety standards, a proven quality record
• Promotes a clean shop and work environment as well as cleaning responsibilities including equipment, chip removal, and work area
• Cooperates fully with others within and outside the department, assists others.
• Communicates delays and problems effectively and timely
• Works under minimal supervision
• Effective communication and interpersonal skills
• Demonstrates a strong mechanical aptitude
• Good functional knowledge of trigonometry, geometry and basic math
• Functional knowledge of measuring instruments
• Solid understanding of machining practices

Qualifications: BS in Manufacturing Engineering with 3 years of Experience

• Extended or irregular hours may be required.
• As business conditions warrant a change in the operating necessities of the Company, all employees are expected to react productively, handle other essential tasks assigned now or in the future.
• Training in CNC lathe and mill operation, preferably on Okuma lathes and Fanuc Robodrill VMC machines.
• Experience in a precision machining environment.
• Ability to read and interpret prints.
• Ability to handle all basic CNC machining operations including changing inserts, touching off tools and making offsets.
• Familiar with quality control procedures including using common shop measuring instruments (calipers, micrometers and gauges) and completing inspection documentation.
• Ability to work independently and efficiently.

Qualifications: BS in Industrial Engineering with 5 years of Experience

• Formal training or vocational schooling in CNC.
• Skilled in blueprint reading.
• Strong basic math skills.
• Knowledge of micrometers, calipers, and thread gages, etc.
• History of reliability and good attendance
• Associates degree in a technical related field or equivalent experience
• Ability to work well in a team environment
• Ability to effectively communicate
• Experience in the Machine Operation field
• Experience is preferred but not required as the company will train.
• Must have a verifiable long term work history
• Ability to pass all pre-employment screens.

Qualifications: BS in Mechatronics Engineering with 2 years of Experience

• Demonstrate knowledge of safe handling of materials, basic machining practices, and the ability to recognize unsafe situations.
• Read and understand fundamental drawings.
• Communicate with others (peers, supervisors, and subordinates).
• Speaking, talking to others to convey information effectively
• Must be able to understand and deliver basic commands in English
• Must have basic writing and math skills with the ability to use a calculator and read a tape measure and Calipers
• Must be able to work cohesively in a team environment
• Ability to do Offset G Code Changes at the Machine
• Employee provides own basic tools: Calipers, Dial Indicator, Edge Finder, etc.
• Work overtime with appropriate notice and in accordance with company policy.

Qualifications: BS in Aerospace Engineering with 5 years of Experience