CIVIL STRUCTURAL ENGINEER JOB DESCRIPTION

Structural integrity does not announce itself when it is working. A civil structural engineer working across commercial and industrial projects carries code compliance, IBC, ASCE 7, AISC, and ACI as the baseline and then moves into the harder problems of designing foundations for dynamic and rotating equipment, validating load paths through pipe racks and process structures, and keeping capital projects on schedule from feasibility to construction administration. The role spans early-stage scoping and cost estimating through field observation and shop drawing review. PE licensure or active pursuit of it signals the level of independent judgment the work requires.

As the Civil Structural Engineer, you will own the full design and documentation cycle for structural systems across commercial and industrial facilities, translating engineering codes and project requirements into construction-ready deliverables that meet schedule and budget targets. You will work within a multidisciplinary project team, coordinating directly with architects, project managers, and specialty contractors while reporting to a senior engineer or regional engineering manager.

Career Impact: Sustained work on capital projects governed by AISC and ACI standards deepens the specialized design experience that distinguishes PE-licensed structural engineers in the commercial and industrial market.

Business Impact: The calculations and construction documents this role produces are the direct basis for fabrication, permitting, and field erection, and errors here propagate into cost overruns and schedule delays that affect the entire project.

Growth Opportunity: Engineers in this seat regularly advance to Engineer of Record responsibilities on major projects and from there to lead or senior structural roles overseeing junior staff and managing client relationships.

• Perform structural design and analysis calculations for commercial and industrial facilities in accordance with IBC, ASCE 7, AISC, and ACI standards.
• Design foundations for heavy process structures, dynamic and rotating equipment, and structural steel open-process frames.
• Develop construction documents including drawings, specifications, and cost estimates to support permitting and contractor bidding.
• Review shop drawings and respond to RFIs during construction administration to confirm designs are executed as specified.
• Conduct field observations to verify existing conditions, confirm as-built information, and document site findings.
• Coordinate structural design activities with civil, mechanical, and other engineering disciplines throughout detail design.
• Lead or support feasibility studies and budget estimates during project planning phases to define scope and cost parameters.
• Mentor junior engineers and designers by assigning tasks, reviewing work products, and providing technical guidance.

• Bachelor's degree in Civil or Structural Engineering from an ABET-accredited program, or equivalent work experience.
• 3 or more years of structural engineering experience, with demonstrated proficiency in commercial or industrial building design.
• Engineer in Training (EIT) registration required, with Professional Engineering (PE) license preferred or actively pursued.
• Working knowledge of structural design codes including IBC, ASCE 7, AISC, and ACI as applied to steel and concrete systems.
• Ability to prepare and interpret construction documents, including structural drawings, specifications, and load calculations.
• Experience performing field observations, data collection, and construction administration activities.
• Strong written and verbal communication skills sufficient to present technical findings to project teams and clients.
• Proficiency in standard office productivity software and structural drafting tools sufficient to produce or review design documents.

• Experience designing foundations and structural framing for heavy industrial or process facility applications.
• Familiarity with 3D structural analysis software used for steel and concrete member sizing and load path verification.
• Exposure to multidisciplinary project delivery environments involving coordination across civil, mechanical, and electrical disciplines.
• LEED certification or demonstrated experience applying sustainable design criteria on facility construction projects.

• Percentage of structural calculations and drawings issued without revision requests from the Engineer of Record or client review.
• Shop drawing review cycle time, measuring how promptly submittals are returned with actionable comments.
• Construction administration RFI response time, reflecting how quickly field issues are resolved to avoid schedule impact.
• Cost variance on structural scope, tracking how closely final structural deliverables align with the original budget estimate.
• Field observation discrepancy rate, counting the number of as-built deviations identified versus those missed during site visits.
• Typical tools: Structural analysis platforms (commonly RISA 3D or STAAD Pro); drafting and modeling software (commonly AutoCAD or Revit Structure).

• Base Salary Range: $75,000 to $110,000 annually, depending on experience and licensure status
• Bonus: Performance-based annual bonus, typically 5 to 10 percent of base salary
• Equity: Generally not offered at this level in consulting and engineering firms
• Health Benefits: Medical, dental, and vision coverage, with employer contribution to premiums standard
• PTO: 15 to 20 days annually, plus standard federal holidays
• Common Perks: Mileage reimbursement for site visits, PE exam support, professional association dues, and continuing education funding

Figures are estimates based on general US market benchmarks and may be outdated. Adjust based on location, company size, and seniority level.

Background checks, including verification of employment history and applicable screening consistent with project site access requirements, are a condition of employment. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other characteristic protected under federal, state, or local law. Reasonable accommodations are available to applicants and employees with disabilities upon request. Candidates must be authorized to work in the United States.

The Civil Structural Engineer owns a broad scope of structural design and analysis within a growing Facilities Engineering group, leading projects from layout through construction administration as Engineer of Record or under supervision. Reporting to senior engineers and working alongside Designers, Drafters, and clients, this role delivers structurally sound, code-compliant solutions that keep complex, multi-disciplinary facility projects on schedule and within budget.

Key Responsibilities

• Perform structural design and analysis calculations using governing codes, standards, engineering formulas, and experience.
• Provide leadership and guidance to junior engineers while executing a variety of structural engineering tasks.
• Lead or participate in a multi-disciplinary engineering project team.
• Layout and detail entire projects as Engineer of Record or portions under supervision of the Engineer of Record.
• Provide CAD drawings or sketches for incorporation by Designers and Drafters.
• Research design options and document findings for Engineer of Record.
• Review shop drawings and assume the lead engineer role on assigned projects.
• Develop construction cost estimates and direct Designer and Drafter activities as needed.
• Attend client meetings as a Subject Matter Expert and present structural design approaches to technical and non-technical audiences.
• Perform field activities including observing, recording, and verifying existing conditions and measurements.
• Organize, draft, and coordinate technical documents throughout each project.
• Serve as project engineer by leading design efforts and managing schedule and budget.

Required Qualifications

• Bachelor's Degree in Civil or Structural Engineering from an ABET-accredited university, or equivalent work experience.
• EIT required, PE preferred.
• 5 or more years of experience as a structural engineer with a history of successful project completion.
• Knowledge of applicable engineering codes, practices, and accepted standards.
• Proficiency in 2D and 3D drafting techniques.
• Experience with engineering and design software such as AutoCAD Civil 3D or similar tools.
• Ability to work independently and in close collaboration with others.

Embedded within a multi-disciplinary project delivery team, the Civil Structural Engineer develops calculations, diagrams, and construction documents in support of Energy and Telecom infrastructure projects. Working closely with architects, engineers, and field personnel across sites, this role ensures technically sound, permit-ready design solutions that advance projects from concept through construction.

Core Functions

• Solve technical problems and perform engineering design and documentation with an emphasis on Energy or Telecom projects.
• Plan projects and develop calculations, diagrams, and models to support technical solutions.
• Prepare construction documents based on field surveys, available resources, and client requirements.
• Collaborate with all disciplines and stakeholders throughout project delivery.
• Support projects with technical design and documentation.
• Research design solutions and products as needed.
• Manage permitting research, submittals, and follow-up.
• Perform some travel and fieldwork to collect data and develop solutions.

Qualifications & Experience

• Bachelor's degree in Civil Engineering, or equivalent work experience.
• 0 to 5 years of experience, with a structural focus in steel, concrete, foundations, and geotechnical work preferred.
• Knowledge of live, dead, wind, and ice loads, load combinations, and applicable codes preferred.
• Experience supporting architects and engineers in design, documentation, and construction documents for multi-site projects preferred.
• Telecommunication tower analysis experience is a plus.
• Field survey and construction administration experience preferred.
• Proficiency in AutoCAD required.
• Experience in 3D modeling software such as RISA 3D or STAAD, and Bluebeam and MS Office preferred.
• Strong communication skills, professional writing ability.
• Ability to work in a team environment across disciplines and offices.
• Valid Driver's License required.

Reporting to the department engineering leadership, the Civil Structural Engineer designs members and connections for Detailing and Manufacturing while ensuring structural integrity and safety across customer projects. Partnering with project teams and internal customers in manufacturing, project management, and field erection, this role delivers cost-effective structural solutions that meet design schedules and contribute to continuous improvement objectives.

Primary Duties

• Provide well-utilized designs of members and connections for Detailing and Manufacturing that meet customer requirements.
• Assure building structural integrity and safety.
• Develop product and procedure knowledge and improve technical skills continuously.
• Focus on achieving department objectives, profitability goals, and continuous improvement as part of a high-performance work team.
• Assure customer design service needs are met by adhering to design schedules.
• Collaborate with project teams to discuss challenges and create cost-effective solutions.
• Provide technical assistance to customers on specific projects.

Skills & Qualifications

• Bachelor of Science in Engineering, or equivalent work experience.
• Successful completion of the Fundamentals of Engineering (FE) exam preferred.
• Functional and technical engineering skills with a drive for results and continuous self-development.
• Proficiency in PC applications, including Excel, Word, and PowerPoint.
• Strong problem-solving, time management, and organizational skills.
• Customer-focused mindset with integrity, ethics, and perseverance.
• Strong listening skills and ability to build positive peer relationships.

Sitting at the intersection of structural steel design and construction administration, the Civil Structural Engineer applies estimation methods and value engineering to support commercial and industrial building projects from design through site observation. Operating across architect, owner, engineering discipline, and vendor relationships, this role ensures structural steel, miscellaneous metals, and hoisting systems are delivered safely, economically, and in compliance with construction documents.

Duties

• Represent the building market as a knowledgeable leader in the erection of structural steel, miscellaneous metals, cranes, and material hoists.
• Learn and apply structural steel project estimation methods.
• Communicate and coordinate with architects, owners, engineering disciplines, vendors, building officials, and consultants throughout design phases.
• Assist on collaborative commercial and industrial projects providing value engineering to clients.
• Review construction documents to provide economy and value to the client.
• Support construction administration through site visits, shop drawing review, RFI responses, field modifications, and field observation reports.

Requirements

• B.S. degree in Civil or Structural Engineering preferred, or equivalent work experience.
• Experience with commercial structural design helpful.
• Knowledge of concrete, steel, and masonry building systems a plus.
• Experience with structural analysis software such as Risa 2D/3D, Tekla, Trimble Connect, AutoCAD, Bluebeam, and MS Office products.
• Excellent verbal communication and writing skills.
• Self-motivated with strong technical skills.

A key member of the structural engineering team, the Civil Structural Engineer performs structural design and analysis calculations under governing codes while supporting construction administration and field activities for industrial and process facility projects. Collaborating across internal team members, contractors, and clients, this role produces design drawings, technical reports, and RFI responses that ensure structural compliance and project continuity.

Functions

• Communicate and collaborate effectively with internal team members, contractors, and clients.
• Perform structural design and analysis calculations using governing codes, standards, and structural analysis software.
• Provide drawings and sketches of designs for incorporation by Designers and Drafters.
• Perform field activities including observing and recording existing field conditions.
• Conduct construction administration including responding to RFIs.
• Develop technical reports.

Experience & Qualifications

• BS in Civil or Structural Engineering or related degree, or equivalent work experience.
• 3 or more years of structural engineering experience.
• EIT registration required within one year of hire.
• Experience performing structural design and analysis calculations under governing codes and standards.
• Experience producing design drawings and sketches for use by Designers and Drafters.
• Proficiency in Microsoft Suite and structural analysis software.
• Excellent written and verbal communication skills.

Preparing calculations and drawings for precast products in support of sales and production depends on the Civil Structural Engineer, who works alongside CAD Operators and the Engineering Manager to balance submittal flow and advance continuous improvement across manufacturing, shipping, and installation processes. Based within a precast plant environment and reporting to the Regional Engineering Manager, this role ensures that quality precast products are manufactured to specification and that engineering output aligns with production priorities.

Accountabilities

• Work with CAD Operators and assist the Engineering Manager in prioritizing work in support of sales and production.
• Support CAD Operators to balance the flow of submittals and production drawings.
• Work on engineering projects supporting sales and continuous improvements in manufacturing, process, shipping, handling, and installation.
• Prepare calculations and drawings for precast products.
• Work with the Quality Control Department to ensure quality precast products are manufactured.

Technical Qualifications

• Bachelor of Science in Civil or Structural Engineering or similar field, or equivalent work experience.
• Engineer in Training registration in any state.
• 0 to 3 years of industry experience with previous internship or design experience.
• Fundamental knowledge of reinforced concrete and steel design, with ability to read and interpret drawings.
• Proficiency in AutoCAD, Inventor, Mathcad, RISA 3D, Microsoft Office, or other finite element software.
• Self-motivated with strong organizational and communication skills.
• Ability to interact with customers, managers, engineers, drafters, and other employees to resolve engineering and management issues.

As the Civil Structural Engineer, this role determines applicable code requirements, develops specifications, and completes load calculations and analysis of structures and foundations for industrial facilities, with particular emphasis on steel design and foundations for large industrial equipment. The structural engineering team relies on this work to ensure facility interfaces are correctly coordinated across disciplines within the 3D model and that construction packages are fully compliant and ready for the field.

Activities

• Determine applicable code requirements and apply them correctly in calculations and specifications.
• Interact with other engineering disciplines and designers during detail design to coordinate facility interfaces within the 3D model and deliverables.
• Stay current with changes in codes and industry standards at state and national levels.
• Develop specifications and complete load calculations and analysis of structures or foundations for Issued For Construction packages.
• Perform field condition assessments.
• Interface with on-site and remote cross-functional project teams.
• Assist in preparation of project schedules and estimates to define the project plan.

Position Requirements

• 5 or more years of structural engineering experience preferred, with a varied range of project examples, or equivalent work experience.
• Working knowledge of industry codes including IBC, ASCE 7, AISC, and ACI.
• Demonstrated ability to complete structural system analysis, sizing, design, and report writing, including detailed design of steel structures and concrete foundations.
• Knowledge of structural calculation software such as RISA3D and LPILE preferred.
• Strong interpersonal and leadership skills with the ability to communicate complex issues across multiple offices and teams.
• Willingness to travel 15 to 30% of the time to client sites and other offices.

Civil Structural Engineer shapes the civil and structural design of high-voltage electric substations and transmission facilities, producing steel and foundation detail drawings and applying engineering software to meet project-specific standards and schedules. The work directly supports project teams, customer representatives, and management by ensuring correct application of engineering standards including NESC, ASCE, IBC, AISC, and ACI across all deliverables.

Operational Focus

• Create or modify civil and structural design documents in collaboration with the project team.
• Develop steel and foundation detail drawings.
• Apply engineering software for the design of structural steel, foundations, and site preparation.
• Perform engineering and design functions to meet project schedules using project-specific standards.
• Communicate and coordinate project activities with customer representatives, the project team, and management.
• Ensure correct application of engineering standards including NESC, ASCE, IBC, AISC, and ACI.
• Maintain personal responsibility for the quality and accuracy of all work produced.
• Travel out of town for short periods as required by project assignments.

Knowledge, Skills & Abilities

• Experience with site grading, drainage, earthwork, cantilevered utility structures, towers, masonry buildings, and substation foundations, or equivalent work experience.
• Extensive knowledge of engineering standards including NESC, ASCE, IBC, AISC, and ACI, and of civil and structural design documents for substation and transmission projects.
• Knowledge of steel and concrete design, structural analysis, and substation and transmission line components.
• Experience with RISA 3D, PLS-Tower, or STAAD Pro preferred.
• Proficiency in common word processing, spreadsheet, and email software.
• Strong communication skills.
• Ability to work effectively with co-workers, vendors, and clients in a team environment.

The Senior Civil Structural Engineer develops and oversees detailed design and specifications for major industrial structures, including heavy process foundations, structural steel open process structures, and civil site plans for facility modifications. Working with client engineers, project planners, and multidisciplinary design teams, this role produces budgets, construction-ready deliverables, and training materials that keep large capital projects on track and compliant with engineering and safety standards.

Key Deliverables

• Lead planning, preparation, and supervision of detailed design and specifications for major and complex structures, systems, and equipment.
• Perform site visits and project walkdowns requiring climbing and as-built information gathering using surveying equipment and measuring tools.
• Design foundations for heavy process structures, dynamic and rotating equipment, and industrial facility expansions.
• Design structural steel open process structures, pipe racks, facility modifications, and modular structures.
• Develop civil site plans for existing facility modifications, incorporating stormwater management, underground piping, and in-plant road and traffic planning.
• Participate in project planning and preparation of budgets and estimates.
• Work with client engineers to develop designs compatible with client requirements, and coordinate reporting and project controls to keep projects on track.
• Prepare and present departmental training materials.

Professional Experience

• Bachelor of Science in Civil Engineering with a structural focus, or equivalent work experience.
• Professional Engineering License (PE) required.
• 10 to 15 or more years of industry experience with large industrial projects.
• Advanced knowledge of engineering, construction, and project management principles.
• Knowledge of structural analysis software such as STAAD, Enercalc, and Tedds.
• Familiarity with 3D design and viewing software such as Navisworks, CadWorx, Advanced Steel, and AutoCAD.
• Strong math, written and oral communication, organizational, and time management skills.
• Proven negotiation and interpersonal skills.
• Ability to thrive in a team environment.

Embedded within a global engineering organization, the Civil Structural Engineer advances the creation of civil and structural standards while delivering safe, cost-efficient infrastructure for large capital projects across multiple regions. Working closely with field construction teams, contractors, and cross-functional stakeholders, this role influences the layout and design of new assets and proposes standardization opportunities that improve safety and sustainability at scale.

Areas of Ownership

• Deliver results through strong working relationships with project teams, operations, and corporate personnel while maintaining high technical expertise and clear communication.
• Plan and conduct independent work requiring judgment in the evaluation, selection, application, and adaptation of engineering techniques, procedures, and criteria.
• Aid in the creation of global civil and structural standards while ensuring compliance with national and international requirements.
• Support operations by providing safe, cost-efficient infrastructure using sustainable and current technology.
• Influence layout and design of new assets based on field construction knowledge and understanding of contractor methods to maximize design safety.
• Identify and propose opportunities to standardize design of structures and infrastructure across regions and projects.
• Provide technical analysis, review drawings, and integrate EHS values and standards throughout all project phases.

Education & Experience

• Bachelor's degree in Civil or Structural Engineering required, Master's or higher preferred, or equivalent work experience.
• 10 or more years of progressive civil or structural engineering experience, including 5 or more years of field construction experience.
• Experience optimizing analysis, layout, and design of structures and infrastructure for large capital projects across multiple regions.
• Knowledge of civil and structural design techniques and CAD and graphics skills.
• Experience developing RFQs, reviewing vendor proposals, and supporting supplier selection.
• Strong people management, decision-making, negotiation, intercultural, and change management skills.
• Proficiency in a language other than English, especially Portuguese, Chinese, Korean, or German, is advantageous.
• Flexibility to work across all project areas and willingness to travel internationally.

Reporting to substation project leadership, the Civil Structural Engineer leads development of engineering standards and performs complex calculations for steel structures and concrete foundations in support of high-voltage electric transmission and distribution projects. Partnering with Engineering, Design, Operations, and Construction departments as well as Subject Matter Experts, this role ensures that substation engineering philosophy, procedures, and industry code compliance are upheld across all technical deliverables.

Role Responsibilities

• Provide substation technical support including review of engineering drawings, manufacturer drawings, and equipment specifications.
• Provide technical support to Engineering, Design, Operations, and Construction departments.
• Lead development and implementation of Substation Engineering and Design philosophy, standards, guidelines, and procedures, and identify risks to ensure compliance.
• Guide development, enhancement, and refinement of standard engineering techniques, procedures, and criteria.
• Assist Subject Matter Experts in technical discussions to update and develop standards.
• Interpret and adapt relevant industry best practices, standards, and legislation for the company.
• Work in a matrixed team environment, providing technical guidance, coaching, and communication of expectations.
• Perform and check complex calculations for steel structures and concrete foundations to support substation projects, and prepare comprehensive written and oral technical reports.

Background & Experience

• Bachelor of Science in Civil or Structural Engineering or Civil or Structural Engineering Technology from an ABET-accredited school, or equivalent work experience.
• Professional Engineering License preferred, Master's degree in Civil or Structural Engineering desirable.
• 10 or more years of experience without PE license, or 8 or more years with PE license.
• Working knowledge of industry standards, including ASCE, ACI, SEI, IEEE, ANSI, NFPA 70, ASTM, NEC, NESC Codes, and applicable Building Code.
• Familiarity with substation equipment and electric utility practices.
• Proficiency in MS Office Suite including Outlook, Teams, Word, Excel, and PowerPoint.
• Familiarity with SharePoint, SAP, STAAD, Bentley MicroStation, AutoCAD, Primavera, Cascade, or similar tools.
• Experience establishing clearly defined performance goals and standards.
• Ability to motivate, counsel, coach, and develop direct reports.
• Valid driver's license with an acceptable driving record required.

Sitting at the intersection of forensic engineering and project management, the Civil Structural Engineer performs cause-and-origin investigations of structural failures and construction defects across residential, commercial, and industrial sites, producing written forensic reports and managing multiple concurrent projects within agreed scopes and budgets. Operating across geotechnical support teams, clients, and legal stakeholders, this role applies PE-level judgment to meet client deliverables on time while adhering to safety protocols and land use regulations.

Job Functions

• Perform forensic assignments based on agreed scope of work and budget to assess and determine the cause and origin of structural failures and construction defects.
• Study, investigate, and document cause and origin findings through field investigations.
• Produce written forensic reports detailing causes and origins of construction defects and structural failures.
• Manage multiple projects and coordinate geotechnical and other support to produce client reports in a timely manner.
• Ensure procedures and safety features are followed throughout each project.
• Apply equations, applications, and figures to ensure proper procedure, including chemical testing, drafting software, electrical test devices, land surveying techniques, and the metric system.
• Follow land use laws and regulations at every stage of the work.
• Serve as team leader or project manager and supervise or evaluate associate team members as needed.

Minimum Qualifications

• Bachelor of Science in Civil Engineering or higher, or equivalent work experience.
• PE License required.
• 7 or more years of experience with project management and field investigation experience required.
• High level of analytical skills with ability to define problems, collect data, establish facts, and draw valid conclusions, including ability to read, analyze, and interpret scientific reports, financial reports, and legal documents.
• Ability to write scopes of work, budget estimates, schedules, reports of findings, proposals, and other technical documents.
• Ability to present information effectively to top management, clients, and public groups.
• Knowledge of Microsoft Office applications and computer-assisted engineering and design software.
• Ability to initiate, develop, and maintain mutually beneficial client relationships and communicate with clients at all levels.
• Physical requirements include the ability to lift to 50 lbs., climb ladders, access attics, crawl spaces, and slope roofs, and drive to job sites.
• A valid driver's license and reliable transportation.

A key member of the Construction and Utility Systems Engineering group, the Civil Structural Engineer conceptualizes, engineers, and manages civil, architectural, and utility projects across greenfield and operating food plant and non-food facilities. Collaborating across multidisciplinary design teams, suppliers, contractors, and less experienced engineers, this role delivers feasibility studies, capital cost estimates, and fully implemented projects that meet scope, budget, and schedule targets.

What You'll Do

• Conceptualize, engineer, design, and implement civil, architectural, and utility projects within greenfield and operating food plant and non-food facilities.
• Lead and direct multidisciplinary design teams in preparation of feasibility studies and capital cost estimates.
• Lead project concept activities and drive concepts through design and implementation if funded.
• Develop technical project deliverables including drawings, specifications, scopes of work, budgets, schedules, reports, design criteria, and operating procedures.
• Manage project budgets, scopes of work, design teams, suppliers, and contractors during design and on-site construction and start-up.
• Work independently with sound engineering judgment and mentor less experienced engineers, including performance evaluation.
• Evaluate cross-functional processes to diagnose root cause issues and provide resolution options.

Required Qualifications

• Bachelor's degree in Civil Engineering, Architecture, or equivalent engineering background, or equivalent work experience.
• 5 or more years of experience with facilities construction and asset renewal projects at greenfield sites, industrial facilities, and corporate campuses.
• Experience in the food or pharmaceutical industry preferred.
• Strong project management skills and general construction trade knowledge, including understanding of Design/Build, Lump Sum, Construction Management at Risk, and Construction Management as Owner's Agent delivery systems.
• Knowledge of site development, land development approval, stormwater and site utility design, mechanical utility systems, including HVAC and compressed air, and basic electrical systems.
• Ability to perform structural calculations, prioritize business objectives, control schedules, and execute projects efficiently.
• Strong negotiating skills with ability to balance assertiveness and empathy with vendors and subcontractors.
• Excellent oral and written communication, leadership, interpersonal skills, and ability to collaborate with limited supervision.

Uninterrupted operation of a semiconductor wafer fab's utility systems and site infrastructure depends on the Civil Structural Engineer, who owns and manages site utilities, excavation, roofing, waterproofing, and site planning while overseeing CSA-related projects from scoping through construction administration. Based within a Facilities Engineering team operating over 150 utility systems and reporting to facilities leadership, this role ensures all work complies with applicable codes, permit requirements, and safety standards while managing project finances, contractors, and SOPs for owned systems.

Day-to-Day Responsibilities

• Own and manage site utilities, excavation, roofing, waterproofing, green space, and site planning aspects.
• Develop and execute the site appearance roadmap.
• Oversee and manage CSA-related projects to meet design criteria, scope, budget, and schedule.
• Manage technical, administrative, financial, and schedule aspects of facilities projects, including stakeholder communications and contractor coordination.
• Ensure all work complies with applicable codes, standards, and permit requirements, including work, building, confined space, and burn permits.
• Create scopes of work for CSA contractor bidding and manage awarded contractors.
• Develop and maintain SOPs and SOOs for owned systems.
• Manage project finances, procurement, estimates, forecasting, and capitalization, and provide construction administration including submittals and RFI responses.

Qualifications & Experience

• Bachelor's degree in Civil Engineering, Architecture, or equivalent engineering background, or equivalent work experience.
• LEED certification or experience with LEED requirements preferred.
• 5 or more years of experience with Facilities CSA-related systems and infrastructure.
• Familiarity with applicable building and structural codes as they relate to design and construction.
• Basic knowledge of general electrical and mechanical systems as they interact with building structural and architectural systems.
• Proficiency in Microsoft Office including Excel, PowerPoint, Word, and Project.
• Experience working with AutoCAD for reviewing, creating, and modifying drawings.
• Strong leadership, project management, organizational, and time management skills with the ability to coordinate multiple design disciplines.
• Strong analytical, problem-solving, communication, and coordination skills.
• A demonstrated safety leadership mindset.

As the Civil Structural Engineer, this role supervises, manages, and serves as a technical expert on civil and structural projects from small assignments to large, complex programs in mining and industrial environments, including steel fabrication, concrete design, and earthworks. The civil and structural engineering program relies on this work to maintain sound project execution, with outputs spanning engineering drawings, vendor contract administration, and strategic site planning for designated areas.

Scope of Work

• Supervise, plan, organize, manage, and serve as technical expert on Civil and Structural Engineering projects and programs to ensure successful completion within time and cost targets.
• Serve as technical expert or Project Engineer for design of small to large and complex Civil and Structural Engineering projects, working with other engineering disciplines using sound engineering, calculations, analysis, and problem solving.
• Review engineering drawings for constructability and manage production of steel fabrication and rebar bending drawings.
• Investigate and develop recommendations for planned Civil and Structural projects.
• Contribute to site strategic planning and budgeting for designated Civil and Structural Engineering areas.
• Develop and review scopes of work, evaluate proposals, and assist with drafting funding requests and administering vendor contracts.
• Identify improvement opportunities and determine associated value for risk reduction measures.

Skills & Qualifications

• Bachelor's degree in Structural or Civil Engineering or related discipline with 5 years of experience, or Master's degree with 3 years of experience, or equivalent work experience.
• PE Certification with 10 years of experience preferred.
• Advanced knowledge of Civil and Structural Engineering principles, including steel fabrication, concrete design, earthworks, rebar bending schedules, and construction practices.
• Experience with metal mining operations including geotechnical, structural, earth, and concrete works preferred.
• Proficiency in MS Office and engineering tools including CAD, analytical, and mapping software, as well as AutoCAD and Civil3D.
• Experience with cost estimating, project scheduling, and project controls for Civil projects.
• Strong research, analytical, communication, and hazard awareness skills with the ability to follow safety practices.
• Ability to travel to international job sites 15 to 25% of the time and work in mine or manufacturing plant environments with required PPE.