• Perform a variety of work assignments involving brush, roller, and spray painting.
• Determine the color and consistency of paint required.
• Select paints from plans and specifications.
• Mix pigments, thinners, and oils to produce paint that will flow evenly and consistently to ensure surfaces have a smooth-textured and decorative appearance.
• Check masking and preparation of surfaces to be painted.
• Apply paint, selecting the proper materials and equipment to achieve an even distribution.
• Apply finishes to wood, metal, and equipment in interior and exterior locations using brushes, rollers, and spray equipment.
• Evaluate existing painted surfaces for damage.
• Alter, repair, and maintain new and historical painted surfaces.
• Match colors, shading, and texture of interior finishes.
• Trim, sand, and smooth surfaces using hand tools, caulk, sandpaper, and spackle knives.
• Follow all relevant safety rules, regulations, and standard operating procedures.
• Use knowledge of and comply with all OSHA safety rules and regulations to ensure that work progresses safely.

Skills: Surface Preparation, Paint Mixing, Color Matching, Brush Roller Spray Application, Finish Repair, Equipment Selection, Safety Compliance, OSHA Knowledge

• Interpret job card requirements and identify all required resources to perform a job.
• Conduct risk assessments and mitigate any identified risks.
• Prepare surfaces for repainting by degreasing, chipping, scaling, and sandpapering by hand and machine.
• Blend paints and other materials to achieve the right color or texture and paint surfaces according to instructions.
• Execute the job adhering to all instructions, procedures, policies, and regulations while staying within time and cost constraints.
• Liaise with, support, and assist superiors, project managers, and other sections to ensure optimum completion of jobs.
• Abide by, promote, and partake in all safety, health, environmental, quality, and security requirements.
• Observe all applicable industrial relations requirements.

Skills: Job Card Interpretation, Resource Planning, Risk Assessment, Surface Preparation, Paint Blending, Procedure Compliance, Cross-Team Coordination, Safety Regulations

• Check parts before priming and painting to ensure they are properly prepped.
• Mix paint and use an industrial spray painting system within a paint booth to prime and spray paint assigned parts.
• Complete visual inspection of parts after painting to ensure the paint and primer meet customer and quality requirements.
• Assist with monitoring paint supply inventory and ordering.
• Ensure that the work area and equipment are cleaned and that supplies are replenished at the end of the shift.
• Cross-train in other cell work tasks, including bonding, assembly, and finishing.
• Comply with all environmental, health, safety, and quality policies and procedures regarding the use and disposal of paint and supplies.
• Comply with all safety precautions recommended by paint manufacturers.
• Complete routine preventative maintenance on the paint booth and equipment.
• Complete all required paperwork and computer entries in an accurate and timely manner.

Skills: Parts Inspection, Industrial Spray Painting, Paint Mixing, Quality Inspection, Inventory Monitoring, Equipment Maintenance, Safety Compliance, Documentation Accuracy

• Read and interpret job cards and prepare surfaces according to the applicable procedures.
• Mix and sort the colors of the different paint products.
• Apply paint and fiberglass to surfaces using appropriate tools such as pressure pumps, no-air and conventional types, or others.
• Operate the Wheelabrator shot blasting and painting machines.
• Check the required thickness using gauges.
• Maintain equipment used for the job, such as pumps, pistols, hoods, and hoses.
• Varnish, paint, and touch up furniture.
• Cut glass, install panes, apply wallpaper, and cut and paint letters or ornaments onto surfaces using a paintbrush or airbrush.

Skills: Job Card Interpretation, Surface Preparation, Color Mixing, Spray Application, Shot Blasting Operation, Coating Thickness Measurement, Equipment Maintenance, Decorative Finishing

• Monitor paint application and the curing process and adjust on demand.
• Communicate with the Plant Supervisor regarding schedule status, potential changes, inventory levels, special production considerations, and emerging concerns.
• Inspect equipment before operation to ensure it meets company standards.
• Start equipment according to established procedures.
• Receive training on required Environmental, Safety, and Quality Control policies.
• Ensure full adherence to all Environmental, Safety, and Quality Control procedures.
• Report any deviations from standards to the appropriate personnel.
• Maintain consistent compliance with company guidelines throughout daily operations.

Skills: Process Monitoring, Cure Control, Supervisor Communication, Equipment Inspection, Equipment Startup, Environmental Compliance, Quality Adherence, Standards Reporting

• Work safely to prevent on-the-job injuries by wearing proper safety equipment and following all required procedures.
• Identify unsafe behaviors or conditions and take corrective action proactively.
• Maintain established production rates while meeting the expected quality level.
• Keep work areas clean and organized each day for yourself and others.
• Dispose of materials and waste properly to support workplace safety.
• Train and assist other team members.
• Share knowledge to promote team growth and efficiency.
• Set a positive example in problem solving, conflict resolution, work ethic, and dependability.
• Take the initiative to anticipate potential product or team issues.
• Resolve identified issues promptly to maintain smooth operations.

Skills: Workplace Safety, Hazard Identification, Production Efficiency, Quality Focus, Housekeeping Standards, Team Training, Knowledge Sharing, Problem Resolution

• Mix paint for spraying or programming and load and position items for painting.
• Set up materials and equipment to ensure proper application.
• Clean the spray booth and surrounding work area daily by removing filters, cardboard, floor liner, paint dust, and other debris following safety procedures.
• Dispose of removed materials in accordance with safety guidelines.
• Maintain a safe and clean work area at all times.
• Observe all safety and health rules during painting operations.
• Inspect equipment regularly to confirm proper function.
• Maintain equipment in good operating condition through routine care and reporting issues promptly.

Skills: Paint Mixing, Equipment Setup, Spray Booth Cleaning, Waste Disposal, Workplace Safety, Equipment Inspection, Equipment Maintenance, Process Compliance

• Prepare surfaces for finish, such as plaster compound.
• Know various types of paints and applications.
• Use hand tools and some power tools properly.
• Use brushes, rollers, and spray equipment.
• Work on the installation of various wall coverings.
• Spackle, tape, and finish sheetrock plaster joints and corner beads.
• Use proper masking and correct solvents and mixing agents.
• Work cleanly and safely.
• Perform miscellaneous jobs, such as cleaning and moving.
• Remove and replace the cove base and borders.
• Know how to strip, prime, and spray metal surfaces.
• Handle all facets of plant and building maintenance, including the storage of hazardous materials and chemicals used by the department.

Skills: Surface Finishing, Paint Knowledge, Hand Tools, Spray Application, Wall Coverings, Drywall Finishing, Masking Techniques, Facility Maintenance

• Assist with on-site coordination of painting professionals and other trade contractors involved in building and facilities painting projects.
• Confirm that all tasks progress according to the schedule requirements.
• Verify that completed work meets required specifications.
• Ensure statutory and regulatory requirements are consistently followed.
• Report delays or problems to the coordinator as soon as they arise.
• Adopt best practice work methods throughout all tasks.
• Ensure all work complies with WHS policies and environmental protection standards.
• Follow relevant legislation and building codes during project execution.
• Promote a positive image within the community.
• Provide courteous, responsive, and effective service in all interactions.

Skills: Site Coordination, Schedule Tracking, Quality Verification, Regulatory Compliance, Issue Reporting, Best Practice Methods, WHS Compliance, Customer Service

• Arrive at the job site prepared with proper attire to prevent setbacks during work time.
• Provide professional painting performance to ensure customer satisfaction.
• Follow instructions from the superintendent or foreman to complete tasks correctly.
• Confirm that no details are missed during the painting process.
• Make on-site preparations to support a smooth project workflow.
• Set up materials and tools to optimize efficiency.
• Check the job site at the end of the day for cleanliness.
• Remove debris and organize tools before leaving the area.
• Maintain a clean work environment to support safety and professionalism.

Skills: Job Site Readiness, Professional Painting, Instruction Compliance, Detail Awareness, Worksite Preparation, Tool Setup, End-of-Day Cleanup, Site Organization

• Operate painting tools, measuring devices, the spray booth, and the ventilation system with minimal supervision.
• Perform routine and continuous paint operations in military, commercial, and dry film with minimal supervision.
• Perform and understand NADCAP operations with some guidance.
• Read and follow work orders or standard work to perform paint functions.
• Understand quality criteria and quality notification with guidance.
• Maintain a clean and safe working environment in line with company policies.
• Take an active role to ensure environment, health, and safety standards and procedures are met and in compliance.
• Look for ways to eliminate safety hazards and improve the overall safety of the workplace.
• Provide continuous improvement ideas.
• Ensure quality product utilizing established quality procedures.
• Audit the work area for safety compliance.
• Adhere to all rules and codes of conduct.

Skills: Paint Operations, Spray Booth Operation, NADCAP Compliance, Work Order Reading, Quality Awareness, Safety Compliance, Continuous Improvement, Safety Auditing

• Spray paint the final coat of paint, dope, and related materials to the interior and exterior surfaces of aircraft after base coats have been applied and surfaces prepared to receive the final coat.
• Replace call letters, insignias, stars, and similar markings by using templates when outlines are still visible.
• Apply special decals and stencils to the interior or exterior of aircraft, such as modifications or changes.
• Perform touch-up and rework requiring the same skill level of work as described herein.
• Blend and mix paints and dopes to the proper spraying consistency.
• Store, handle, use, and dispose of hazardous waste chemicals such as acids, caustics, flammables, poisons, and oxidizers in accordance with environmental protection laws.
• Input and retrieve production data into and from computer systems.

Skills: Aircraft Spray Painting, Final Coat Application, Decal Installation, Touch-Up Rework, Paint Blending, Hazardous Materials Handling, Environmental Compliance, Production Data Entry

• Apply paint to parts and assemblies to meet required quality and finish specifications.
• Maintain equipment in a touch-up booth and decide the proper method and degree of rework needed to provide satisfactory finished units, parts, and assemblies.
• Perform coating repairs through the use of hand tools and techniques.
• Perform accepted touch-up painting application procedures.
• Apply top coat paints on parts previously painted while still in the wet coating stage without flaws.
• Help maintain good housekeeping practices in accordance with company requirements.
• Perform all tasks within safety guidelines and policies.

Skills: Paint Application, Finish Inspection, Touch-Up Rework, Coating Repair, Wet-On-Wet Coating, Booth Maintenance, Housekeeping Standards, Safety Compliance

• Select the correct tools and paints for projects.
• Prepare walls and other surfaces before painting.
• Mix and apply paints, varnishes, and sealants for a lasting finish.
• Cover exposed objects and surfaces.
• Use fillers such as putty and plaster to repair cracks.
• Obey workplace safety rules.
• Collaborate with other design and construction specialists.
• Keep the workspace and tools clean.

Skills: Tool Selection, Surface Preparation, Paint Application, Protective Covering, Surface Repair, Safety Compliance, Team Collaboration, Workspace Cleanliness

• Operate assigned equipment according to established procedures.
• Participate in continuous improvement activities to enhance efficiency.
• Support the operating system during daily operations.
• Maintain a clean and organized work area.
• Comply with all safety rules at all times.
• Record production data accurately.
• Report production information.
• Analyze data and production reports to identify trends or issues.
• Set up equipment and perform changeovers.

Skills: Equipment Operation, Continuous Improvement, Operational Support, Workplace Organization, Safety Compliance, Data Recording, Production Reporting, Equipment Setup

• Perform preparation, painting, and in-process quality checking of vehicles and components in accordance with all relevant standards, work instructions, and drawings.
• Verify that each stage of the painting process meets required specifications.
• Carry out a wide range of paint preparation duties.
• Conduct grit blasting to remove contaminants and prepare surfaces.
• Sand components to achieve proper adhesion and finish quality.
• Mask designated areas to protect surfaces during coating.
• Maintain the paint workshops, tools, and equipment in line with WHS and 5S requirements.
• Inspect tools and equipment regularly to ensure safe operation.
• Complete required work documents during and after tasks, including entries in the ERP system.
• Ensure compliance with health, safety, and environmental policy requirements.
• Take reasonable steps to minimize harm to the workplace, employees, and the environment.

Skills: Paint Preparation, Vehicle Painting, Quality Checking, Grit Blasting, Surface Sanding, Masking Techniques, Equipment Maintenance, Safety Compliance

• Move parts, subassemblies, or completed machines in and out of the spray booth or cleaning station using a hoist, overhead bridge crane, or powered lift truck.
• Set up painting equipment, adjust spray guns, and clean.
• Fill paint tanks, add thinner, and clean, sand, tape, and mask all parts or completed machines for small blast and paint in accordance with established procedures.
• Spray paint, prime, and finish coats.
• Apply prescribed protective coatings.
• Perform touch-up painting and cleaning in accordance with inspection reports.
• Apply decals or stencils in accordance with requirements.
• Detect and report faulty operation, defective material and equipment, drawing discrepancies, and other unusual conditions, and report to the proper supervisor.
• Produce work within acceptable quality and quantity standards.
• Maintain the work area in a neat and orderly condition.
• Record time and production into the data collection system using a bar code reader or computer terminal.
• Perform other similar or related duties in accordance with workload priorities.
• Receive direction from supervision.
• Work from instructions and established procedures, specifications, and follow all safety rules and regulations.

Skills: Material Handling, Equipment Setup, Spray Painting, Surface Masking, Protective Coatings, Touch-Up Painting, Quality Reporting, Safety Compliance

• Perform paint preparation techniques to ensure proper surface conditioning.
• Apply paint and paper using appropriate methods and tools.
• Complete minor body repairs for surface restoration.
• Use various paint systems, including clear coat, basecoat/clearcoat, and Dupont Elite.
• Handle and dispose of paint, chemicals, and related materials properly.
• Clean and maintain spray painting equipment to ensure optimal performance.
• Read and follow blueprints and work orders accurately.
• Use a tape measure with precise and reliable accuracy.
• Carry out masking procedures to protect designated areas during painting.
• Operate various air tools necessary for paint and body preparation tasks.
• Clean and maintain equipment regularly to support safe and efficient operations.

Skills: Paint Preparation, Spray Application, Body Repair, Paint Systems, Chemical Handling, Equipment Maintenance, Blueprint Reading, Masking Techniques

• Help customers decide on colors and the choice of wall coverings suitable for the area.
• Measure, cut, and apply wallpaper and other fabrics to the wall.
• Repair cracks and holes before applying the color.
• Prepare, clean, and sand surfaces in the area to be painted.
• Mix paint to the desired color and texture as decided by the client and appointed personnel.
• Erect scaffolding and swing stages and attach rigging.
• Apply paint, spray finishing, staining, wallpaper, and other materials as per instructions.
• Apply finishes to interior and exterior surfaces.

Skills: Color Consultation, Wallpaper Installation, Surface Repair, Surface Preparation, Paint Mixing, Scaffolding Setup, Finish Application, Interior - Exterior Painting

• Ensure work areas are clean and equipment, tools, and supplies are in proper working order.
• Store all items appropriately after use to maintain organization.
• Follow established quality assurance practices during maintenance tasks.
• Apply infection control and universal precaution procedures at all times.
• Perform duties in accordance with all safety and OSHA requirements.
• Report safety concerns or hazards promptly to the appropriate personnel.
• Maintain current and accurate records using computers or other documentation methods.
• Follow company standards and all applicable federal, state, and local regulations.
• Share observations that may improve departmental quality and efficiency.
• Offer insights that support continuous improvement within the department.
• Attend all-employee and departmental meetings.
• Participate in required in-service training sessions.

Skills: Workspace Organization, Equipment Readiness, Quality Assurance, Infection Control, OSHA Compliance, Safety Reporting, Record Keeping, Continuous Improvement

• Pre-treat and paint parts and welded assemblies per prints and specifications.
• Maintain all production paint-related equipment.
• Perform and record monthly fire extinguisher checks.
• Perform other duties, including the operation of various fabrication and CNC machines.
• Assist in material handling.

Skills: Paint Pretreatment, Print Reading, Surface Coating, Equipment Maintenance, Fire Safety Checks, CNC Operation, Material Handling, Production Support

• Assist with the organization's door re-painting programme, sanding down doors, painting, and glossing.
• Ensure work carried out is in accordance with health and safety guidelines.
• Communicate with management, other internal staff, and contractors prior to, during, and on completion of works.
• Maintain a safe and clean working environment, leaving the site or property clean, tidy, and free from obstructions.
• Perform tasks that are supportive in nature to the essential functions of the job, but which may be altered or redesigned depending upon individual circumstances.
• Participate in professional organizations and maintain current technical knowledge relevant to this position.

Skills: Door Repainting, Surface Sanding, Paint Finishing, Health Safety Compliance, Stakeholder Communication, Site Housekeeping, Task Flexibility, Technical Knowledge

• Perform planned and reactive paint work in all areas of the facility.
• Maintain and care for tools, materials, and additional company property.
• Deliver allocated work to the required quality standards within set timescales.
• Ensure the health and safety of self and others in the workplace in accordance with company policy.
• Follow and adhere to instructions and directives from line management and the central co-ordination team.
• Comply with all relevant company health and safety policies, instructions, and directives.

Skills: Facility Painting, Tool Maintenance, Quality Delivery, Time Management, Workplace Safety, Instruction Compliance, Policy Adherence, Team Coordination

• Perform proper repairs to surfaces before applying finishes, such as sanding, patching, mudding, and scraping.
• Maintain proper stock of paints, colors, thinners, patching plaster, brushes, scrapers, sandpaper, knives, spreaders, trays, and other painting and wallcovering equipment.
• Perform proper maintenance on equipment, both hand and mechanical.
• Maintain housekeeping of supply cabinets and work areas.
• Participate in collaborative identification and reporting of patient safety issues.
• Ensure the use of any required personal protective equipment.

Skills: Surface Repair, Paint Inventory, Equipment Maintenance, Housekeeping Standards, Supply Organization, Safety Reporting, PPE Compliance, Team Collaboration

• Follow the rules of safe conduct at all times.
• Accurately interpret and apply information from work orders, job orders, and specifications.
• Identify, recognize, and demonstrate safe usage of hand tools and power tools appropriate for the job.
• Recognize various materials used in the craft and demonstrate a working knowledge of appropriate material handling techniques.
• Select and safely use appropriate equipment, including manlifts, forklifts, and company trucks.
• Identify, recognize, and demonstrate safe usage of appropriate personal protective equipment for the craft.

Skills: Safety Compliance, Work Order Reading, Hand Tool Use, Power Tool Use, Material Handling, Equipment Operation, PPE Usage, Job Specification Interpretation

• Receive parts and or final product and operate various hand and power tools to prepare for painting, including paint guns, grinders, sanders, wire cutters, air wrenches, screwdrivers, and hand drills.
• Learn and perform other departmental processes in support of the overall painting process.
• Follow specific guidelines and procedures and operate hand and power paint equipment to apply protective coating and final paint.
• Inspect own work before leaving the work area and make adjustments to ensure the final product meets all color and finish requirements.
• Utilize the computer for departmental information.
• Perform preventative maintenance and repair of paint equipment as defined in daily, weekly, and monthly checklists.
• Support the 5S program to maintain work area, equipment, and supplies in a neat and organized manner.
• Ensure inventory of required supplies is kept at appropriate levels and expedite parts to meet the schedule.
• Stack and move completed work by following material handling and safety procedures.

Skills: Parts Preparation, Hand Tool Use, Paint Application, Quality Inspection, Equipment Maintenance, Computer Use, Inventory Control, Material Handling

• Follow safety rules and regulations.
• Clean weld spatter and steel.
• Check the surface profile with a gauge and record.
• Check coated materials for coverage, test for coating thickness, and record on the data sheet.
• Prepare and check surfaces for painting.
• Mix paints and solutions and regulate paint flow, line speed, and temperatures.
• Check for quality assurance in accordance with DSCO procedures.
• Attend all spray-outs.
• Complete, read, and interpret drawings for NPA, SCR, and NP layouts.
• Touch up coated materials.
• Clean and store painting equipment.

Skills: Safety Compliance, Surface Preparation, Paint Mixing, Spray Control, Coating Inspection, Thickness Measurement, Quality Assurance, Equipment Cleaning

• Help with material handling.
• Operate Blastec equipment.
• Maintain air quality readings and conduct daily inspection of Blastec equipment.
• Monitor and maintain the correct work mix of shot and grit in the Blastec to ensure the cleaning of steel and the profile of blast.
• Maintain the area and ensure it is clean of shot hazards.
• Maintain the speed of the blast and adjust the degree of cleaning.
• Perform a blast profile check on blasted steel.
• Load and unload the Blastec.
• Perform light maintenance repairs to the Blastec.
• Perform coatings quality check and DFT, and record.
• Review daily in-process environmental checks and records.
• Perform shipping accuracy checks and mark steel.

Skills: Material Handling, Blastec Operation, Air Quality Monitoring, Shot Grit Control, Blast Profile Checking, Equipment Maintenance, Coating Inspection, Shipping Verification

• Use manual and automatic spraying equipment to apply paint to all component surfaces conveyed automatically through the powder booth.
• Hang materials to be spray-painted onto the conveyor and unload painted material from the conveyor.
• Clean and refill all powder feeding units and spraying equipment, and record powder usage.
• Review shop packet specifications, select the correct color from stock shelves, and apply the powder using a manually operated powder gun.
• Unload components and perform visual inspection to ensure complete paint coverage and quality standards have been met.
• Touch up minor paint defects.
• Stack complete work on pallets or hand trucks, re-identify customer orders, apply the appropriate ID tag, and deliver material to the next specified production department.
• Comply with all applicable safety procedures and report unsafe conditions or potential safety hazards to the team leader or appropriate resource.
• Maintain a clean, safe, and organized work area.
• Notify the team leader or other appropriate resource when problems arise concerning equipment, operations, materials, inventory, or documentation.

Skills: Powder Coating, Spray Equipment Operation, Conveyor Handling, Color Selection, Visual Inspection, Touch-Up Painting, Material Staging, Safety Compliance

• Perform set-up duties on finishing system equipment and safety devices in accordance with production documentation.
• Position production materials and tooling, and maintain proper dimensions according to print specifications.
• Select and move production materials.
• Perform sanding and tacking.
• Maintain production equipment.
• Maintain equipment and materials necessary to complete the operation.
• Perform work on time to ensure production schedules are met.
• Ensure that products and systems meet quality specifications.
• Perform transactions necessary to maintain accurate records and inventory balances.
• Participate actively as a team member to achieve continuous improvement through lean activities and participate in events to implement lean methods and reduce waste in all aspects of the process.

Skills: Equipment Setup, Tooling Positioning, Material Handling, Surface Sanding, Equipment Maintenance, Production Scheduling, Quality Assurance, Lean Participation

• Experience painting in a health care environment.
• Good critical thinking skills, decisive judgment, and the ability to work with minimal supervision.
• Must be able to work in a stressful environment and take appropriate action.
• Must have the ability to lift, carry, push, or pull a variety of supplies and equipment (weighing up to 50 lbs).
• Ability to perform duties while walking, standing, stooping, and lifting.
• Must have the ability to climb ladders, balance, stoop, kneel, and crouch to make repairs or installations.
• Ability to work from heights.
• Ability to work inside and outside.
• Ability to work around equipment and machinery, electrical hazards, and toxic solvents used in various coatings and finishes.

Qualifications: BA in Healthcare Facility Management with 3 years of Experience

• Relevant painting experience within the aerospace, automotive, or marine industries.
• Experience working with painting equipment and accessories.
• Ability to interpret Technical Data, Schematics, and/or blueprints.
• Must have the ability to lift and carry up to 40 pounds.
• Able to work in a standing position for a minimum of 8 hours per day.
• Experience working with sanders, paint guns, and paint booths.
• Able to operate and computer and programs.
• Experience working in the Aerospace industry within an FAA-sensitive environment.

Qualifications: BS in Industrial Technology with 4 years of Experience

• Experience working in a hotel, following basic directions/instructions.
• Working knowledge of all materials and colors.
• Experience working rapidly, with attention to detail.
• Knowledge of all paints and coatings.
• Must have some taping, wallpaper, and painting skills.
• Fluency in English, oral and written.
• Detail-oriented, well-organized, and accurate.
• Able to lift and carry (frequently) up to 45 pounds (paint, supplies).

Qualifications: BA in Hospitality Management with 1 year of Experience

• Experience in professional painting or related experience.
• Ability to understand and follow both oral and written directions.
• Knowledge and usage of correct business English and office practices. 
• Must be able to communicate effectively with others, analyze and resolve problems, maintain effective working relationships, and interact successfully with internal and external customers.
• Excellent customer service skills.
• Ability to take initiative and effectively adapt to changes.
• Ability to recognize an emergency and take appropriate action.
• Able to establish and maintain cooperative working relations.
• Able to use sound judgment, work independently with minimal supervision.

Qualifications: BA in General Studies with 2 years of Experience

• Experience in spray-painting preparation and application procedures.
• Working knowledge of modern powder booth functions using powder coating equipment.
• Experience in paint and powder coating work.
• Ability to read and write, to comply with written instructions, and to complete job-related paperwork.
• Ability to lift at least 50 lbs and use ladders up to 26.
• Strong interpersonal skills and the ability to communicate well in both oral and written reports.
• Able to work in a customer service environment, interacting with the client.
• Able to stay on task and work independently.

Qualifications: BS in Mechanical Engineering Technology with 3 years of Experience

• Previous experience with industrial spray painting.
• Experience in performing all part finishing activities, including sandblasting, parts finishing, powder painting, and wet spraying.
• Understanding of the offshore painting process.
• Understanding of the paint preparation, including masking, anodizing, and the phosphate process.
• Ability to meet production requirements.
• Can understand and operate equipment properly and safely.
• Ability to read and understand both verbal and written instructions.
• Ability to understand and apply SPP and QA requirements
• Able to use, operate, and maintain specialized equipment, including wet spray guns, airless systems, booths, powder coat systems, ovens, chemical tanks and processes, operate and sandblast maintenance, etc.
• Industrial Spray Painting certification.
• Previous experience working in a manufacturing environment.

Qualifications: BS in Manufacturing Engineering with 4 years of Experience

• Working experience as a painter.
• Ability to operate and maintain required tools and equipment.
• Ability to mix and match paints, varnishes, and other products.
• Ability to communicate and work effectively with clients, supervisor, and co-workers.
• Ability to read and understand blueprints.
• Ability to work under minimal supervision.
• Effective interpersonal skills.
• Flexibility, initiative, and self-motivated.
• Dependable and punctual.
• Good physical condition and the ability to climb ladders, scaffolding, and elevated storage tanks, and work safely above floor level.
• Fluency in English, oral, reading, and writing.

Qualifications: BA in Visual Arts with 2 years of Experience

• Must be a fully qualified Painter (Level 3 Trade qualification).
• Previous relevant work-related experience as a painter.
• Good numeracy and literacy skills.
• Excellent interpersonal and time management skills.
• Good awareness and understanding of personal health and safety, method statements, and risk assessments.
• Enthusiastic, punctual, conscientious, self-motivated.
• Accurate measuring and scoping of work.
• Good knowledge of current industry practice.
• Good problem-solving skills.
• Must have cross-cultural sensitivity with an international perspective.
• Ability to become an active and functioning member of a team.

Qualifications: BS in Industrial Painting with 5 years of Experience

• Paint and body experience or formal collision repair training.
• Ability to read, write, and communicate clearly in English.
• Positive, team-focused attitude with a strong work ethic.
• Ability to operate vehicle equipment and tools safely and effectively.
• Strong attention to detail.
• Understanding of vehicle mechanical systems.
• Ability to multitask, prioritize, and make sound decisions.
• Strong interpersonal and communication skills.
• Physical capability to lift and carry up to 60 pounds and perform frequent standing, walking, reaching, and other movements in varying environmental conditions.
• Ability to follow procedures, use required PPE, and maintain accurate data entry while driving and working.

Qualifications: BS in Collision Repair Technology with 1 year of Experience

• Previous industrial painting experience.
• Painting experience with Urethane topcoats.
• Working knowledge of Graco ProMix in-line mixing systems.
• Previous working knowledge of industrial airless and/or air pressure paint.
• Must be able to work overtime.
• Ability to stand and/or walk for 8+ hours a day.
• Must be able to use hands to position parts in place.
• Able to lift up to 35 pounds at varying frequencies.
• Must wear required Personal Protective Equipment.
• Desire for personal development and growth.
• Must complete the respirator questionnaire.

Qualifications: BA in Construction and Carpentry with 3 years of Experience

• General work experience, preferably an apprenticeship and/or formal training in production painting.
• Strong organizational/follow-up skills.
• Ability to lift, lower, push, and pull all sizes of merchandise up to 50 lbs.
• Ability to stand, walk, stoop, and bend for 8 hours or more daily.
• Ability to constantly use arms, hands, fingers, eyes, legs, and back.
• Must be detail-oriented.
• Must be a team player willing to take on additional roles.
• Have a good attitude and willingness to learn.

Qualifications: BS in Transportation Technology with 2 years of Experience

• Aircraft, automotive, or general painting experience, preferably in aircraft painting.
• Experience performing painting of aircraft sections according to customer designs and unique livery requirements.
• Experience in verifying aircraft readiness for exterior finishing and preparing all surfaces for paint.
• Experience in creating patterns, completing layout work, and applying required primers, paints, and finishes.
• Ability to use fall-protection gear, masks, and other safety equipment.
• Experience working at heights and eligibility for Fall Protection Certification.
• Ability to meet OSHA fall-protection standards as a condition of assignment.
• Must be able to attend and complete all required training sessions.
• Ability to work any assigned shift, including overtime, based on business needs.

Qualifications: BS in Aviation Maintenance with 4 years of Experience

• Previous experience with powder paint systems.
• Detail-oriented and organized.
• Ability to effectively communicate.
• Ability to understand and execute basic standard procedures.
• Ability to perform basic reading and writing skills.
• Ability to effectively work in a team environment.
• Ability to troubleshoot and problem-solve.
• Ability to communicate and work well with others.
• A positive attitude, assertive, dependable, and energetic.
• A strong focus on the quality of work.

Qualifications: BA in Human Services with 1 year of Experience

• Experience creating and integrating photoreal environments, elements, and textures into high-quality visual artwork.
• Ability to produce imagery that aligns seamlessly with 3D photoreal environments using strong artistic judgement.
• Proficiency in 2D and 3D workflows, including Photoshop and 3ds Max.
• Photography experience or a strong interest that supports visual realism.
• Collaboration skills for working closely with Concept Artists and 3D Artists in Design Communications.
• Ability to give and receive constructive criticism effectively.
• Willingness to learn, share knowledge, and contribute to team growth.
• Ability to adapt to and develop a variety of visual styles.
• Experience in creating atmospheric environments and visualising designs at all project stages.
• Strong understanding of layout, spatial proportions, perspective, scale, and massing.
• Environment design skills with emphasis on composition, lighting, and colour.

Qualifications: BS in Animation and Visual Effects with 5 years of Experience

• Experience in surface paint repair.
• Experience using basic manual and mechanical tools.
• Knowledge of occupational hazards and safety precautions.
• Ability to follow directions.
• Ability to work Indoors and Outdoors in remote areas around the mountain.
• Proven ability to complete painting maintenance projects within deadlines.
• Ability to effectively communicate with others.
• Multi-tasking and adapting easily to a fast-paced environment.

Qualifications: BA in Environmental Maintenance with 2 years of Experience

• Experience as an industrial painter.
• Attention to detail, hardworking, mechanical, and organized.
• Ability to read and understand paint specifications and blueprints to complete tasks independently.
• Able to lift up to 50 lbs with frequent bending, stooping, twisting, and climbing of ladders.
• Advance knowledge of the painting method.
• Ability to communicate with people across all departments.
• Ability to maintain high and consistent standards.
• Excellent organisational skills and grooming standards.

Qualifications: BS in Industrial Painting with 3 years of Experience

• Experience in Painting.
• Must have experience working in a manufacturing environment.
• Must have the ability to complete Fall protection training.
• Experience working from heights and using fall protection equipment with weight limitations.
• Experience finishing and painting in either the Aircraft, Automotive, or Marine Industry.
• Experience in reading and interpreting engineering drawings, technical publications, and/or specifications.
• Excellent organizational and time management skills.
• Must have the ability to be innovative and be a change agent.
• Able to lift and carry (occasionally up to 80 pounds (freon recovery unit, freon tanks, and other heavy equipment).
• Able to push/pull up to 200 pounds, move appliances, use appliance dolly, move hot water tanks, and other machinery and heavy equipment.

Qualifications: BS in Automotive Engineering with 4 years of Experience

• Experience in a manufacturing plant environment.
• Previous experience working on truck bodies.
• Basic math, tape measurement, and computer skills.
• Experience with paint tools.
• Able to understand and comprehend measurement.
• Able to read and interpret blueprints for special applications.
• Ability to stand (sometimes for extended periods), walk, use hands to finger, handle, or feel, and reach with hands and arms, and lift to 35 pounds.
• Ability to sit, bend, stoop, squat, reach overhead, or crawl (may be in confined spaces).
• Ability to perform repetitive tasks using their hands, and have the ability to climb ladders and/or work in high places.

Qualifications: BS in Industrial Maintenance with 1 year of Experience

• Trade qualification as a Painter or equivalent.
• Previous experience with Komatsu equipment, including Electrical Drive Off-Highway Trucks.
• Sound troubleshooting skills.
• Previous exposure to Komatsu Australia Maintenance and Operational Policies.
• Excellent communication skills, both written and oral.
• An excellent commitment to Safety.
• Working knowledge of local and mine-specific environment, OH&S, and Industrial legislation.
• Ability to analyse technical problems and suggest remedies.
• Ability to read and understand Electrical and Mechanical Drawings.
• Appropriate demeanour to create a positive "team atmosphere".
• Ability to work safely under pressure and meet deadlines.

Qualifications: BS in Industrial Engineering with 6 years of Experience

• Prior manufacturing experience.
• Ability to work efficiently on a computer for daily production tasks.
• Skill in using measuring tools such as tape measures and calipers.
• Ability to operate hand and power tools safely and effectively.
• Basic reading and writing skills.
• Ability to add and subtract fractions and whole numbers, and convert fractions to decimals.
• Ability to read, follow, and interpret work instructions accurately.
• Skill in performing minor repairs on doors.
• Attention to detail in all assembly and repair tasks.
• Experience working in a manufacturing environment with consistent quality and productivity.

Qualifications: BS in Production Management with 2 years of Experience

• Certificate III in Surface Preparation and Coating Application, or Certificate III in Automotive Refinishing Technology.
• Working knowledge of Paint technologies and standards relating to vehicle painting.
• Heavy Vehicle driving and operating licences.
• High Risk Work Licences, including crane operation, forklift, and elevated work platforms.
• First Aid certificate.
• Good time management and organizational skills.
• Ability to follow written and oral instructions in English and provide consistent work.
• Able to work outdoors in all weather conditions.

Qualifications: BS in Automotive Technology with 5 years of Experience

• Experience in painting in a component manufacturing industry.
• Experience with hand-held spray guns and airless gravity pumps.
• Overhead crane experience.
• Physical demands and the ability to handle weights up to 50lbs.
• Be an assertive team player.
• Working knowledge of ISO requirements and standards.
• Be familiar with the Health and Safety Rules and Regulations.
• Ability to read and understand instructions, written estimates, and work orders.
• Ability to mix paint per standard procedures.

Qualifications: BA in Decorative Arts with 3 years of Experience

• Industrial or automotive painting experience, such as spray, brush, finish, paint parts, etc., of specially engineered product systems, equipment, and units.
• Ability to perform moderate physical effort working continuously with light-weight or frequently with average-weight materials when manipulating spray gun, hand paint materials, and cleaning surfaces.
• Ability to follow safety precautions necessary to prevent injury to others
• Ability to work in somewhat disagreeable conditions with varying degrees of exposure to paint, thinner, fumes, dirt, and rust to the extent of being objectionable.
• Experience working with MIL-Specs.
• Positive attitude and good communication skills.
• Committed to delivering a high level of customer service.
• Flexibility to respond to a range of different work situations.
• Ability to work under pressure.

Qualifications: BS in Coating Technology with 4 years of Experience

• Experience in a spray booth environment.
• Proficient with spray booth manufacturing equipment.
• Attention to detail and finishing projects thoroughly in the highest quality.
• Positive attitude and effective communication.
• Ability to read and comprehend simple instructions, short correspondence, and memos.
• Ability to write simple correspondence.
• Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to compute rate, ratio, and percent, and to draw and interpret bar graphs.

Qualifications: BA in Facilities Maintenance with 1 year of Experience

• Experience as a painter.
• General knowledge of mathematical skills, including addition, subtraction, multiplication, and division.
• Knowledgeable of all paints and wall coverings.
• Able to effectively communicate in English, in both written and verbal forms.
• Ability to work under pressure.
• Knowledge of computer software to include Outlook, MS Word, Excel, and PowerPoint, as well as office equipment, i.e., telephone, copier, fax machine.
• Effective listening abilities with strong judgment skills.
• Excellent customer service skills and interpersonal skills to effectively communicate with all business contacts.
• Must maintain a professional, neat, and well-groomed appearance, adhering to company standards.

Qualifications: BS in Industrial Systems Engineering with 2 years of Experience

• Post-apprentice trade, wallpaper estimation and application, and experience with murals.
• Experience in decorative paint finishes.
• Ability to comprehend simple trade diagrams.
• Working knowledge of tiling.
• Sufficient knowledge to handle assignments of routine and non-routine difficulty with minimal supervision.
• Ability to read, write, and communicate in English.
• Basic computer skills, including MS Excel, Word, and Email.
• Able to operate a curing oven and chart recorders.
• Ability to interpret blueprints.

Qualifications: BS in Painting Technology with 3 years of Experience

• Spray-painting experience in a manufacturing/industrial environment or similar field.
• Knowledge of MSDS about industrial paints, thinners, and their applications.
• Knowledge of hazardous waste storage and disposal (HAZMAT).
• Demonstrated ability to read and interpret prints.
• Ability to work both independently and cooperatively.
• Ability to pass a respiratory fit test.
• Ability to walk, stand, or otherwise move about continuously.
• Ability to bend, squat, twist, kneel, climb, grasp, reach, lift, or otherwise move about frequently and for extended periods of time.
• Ability to lift, move, or otherwise transfer items up to 50 lbs. frequently, or more occasionally.
• Ability to lift, move, or otherwise transfer items up to 75 lbs. occasionally.
• Exposure to typical machine shop physical hazards.

Qualifications: BS in Industrial Design with 4 years of Experience

• Shipping/material handling experience.
• Experience in painting of Industrial or Automotive spray application.
• Be able to learn the external shipping company software and equipment.
• Proven computer skills.
• Capable in basic math and reading skills, and to use the rule and square.
• Ability to daily lift or move heavy-weight material in difficult work positions.
• Must be safety-oriented.
• Ability to read and understand internal procedures and policies.
• Team-oriented with a continuous improvement outlook.

Qualifications: BA in Applied Arts with 1 year of Experience

• Experience in painting and carpentry work.
• Ability to perform work under direct supervision.
• Ability to handle basic issues and problems and refer more complex issues to higher-level staff.
• Ability to maintain and repair, or replace, wall-covered, stained, or painted surfaces of building structure, furniture, and equipment throughout the facility.
• Experience in installing wall covering and ceiling surfaces.
• Strong oral and written communication skills.
• Ability to understand and follow directions.
• Manual dexterity, physical stamina, and the ability to lift/move heavy objects.

Qualifications: BS in Safety and Occupational Health with 2 years of Experience

• Working experience in a manufacturing setting.
• Experience working in a Pre-paint, Blaster, or with other painting equipment.
• Ability to watch gauges, dials, or other indicators to make sure a machine is working properly.
• Ability to conduct testing and inspections of products, services, or processes to evaluate quality or performance.
• Experience in identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
• Experience in monitoring/assessing operations to make improvements or take corrective action.
• Ability to operate painting or coating equipment.
• Ability to inspect the finishes of workpieces or finished products.
• Must be able to be certified in Hazardous Waste Handling.

Qualifications: BS in Quality Assurance Engineering with 4 years of Experience