Job Summary: 

• Tend to the maintenance and preventative maintenance programs, including the maintenance and cleaning of all plumbing equipment
• Test repaired equipment for proper performance
• Maintain a supply of regularly used parts and filters in stock, ordering replenishment.
• Develop goals and priorities, assign tasks and projects
• Ensure accuracy and completion of assigned tasks and projects
• Keep detailed and accurate maintenance reports and documentation
• Maintain a working knowledge of changes in technology, compliance, and repair techniques
• Train site staff on mechanical systems

Skills on Resume: 

• Plumbing Maintenance (Hard Skills)
• Equipment Testing (Hard Skills)
• Inventory Management (Hard Skills)
• Task Delegation (Soft Skills)
• Quality Assurance (Soft Skills)
• Report Documentation (Hard Skills)
• Technical Knowledge (Hard Skills)
• Staff Training (Soft Skills)

Job Summary: 

• Install various types of plumbing pipe, equipment, PVC, sweat, and solder copper and cast-iron pipes.
• Install fixtures (sinks, toilets, urinals, fountains, bathtubs, and showers)
• Install and maintain plumbing systems used for drainage, sewage, and potable water.
• Locate, troubleshoot, repair, and/or replace plumbing equipment and fixtures
• Enforce and comply with site safety procedures and policies.
• Arrives at job sites on time as scheduled to participate in pre-planning and safety discussions before work begins.
• Wears proper Personal Protective Equipment or PPE as always required.
• Ensures all work is performed using proper installation procedures and safety practices.

Skills on Resume: 

• Pipe Installation (Hard Skills)
• Fixture Installation (Hard Skills)
• System Maintenance (Hard Skills)
• Plumbing Repair (Hard Skills)
• Safety Compliance (Soft Skills)
• Time Management (Soft Skills)
• PPE Usage (Hard Skills)
• Workplace Safety (Soft Skills)

Job Summary: 

• Estimate costs of installations and repair work, including requisition of material.
• Fit valves, couplings and other plumbing devices by screwing, bolting or soldering and seal connections with joint compounds, gaskets or caulking by using appropriate tools.
• Inspect systems for pressure loss and leaks.
• Install, repair, and maintain various types of pipe assemblies, plumbing fixtures and piping systems from blueprints and sketches, including but not limited to chilled water, heating, hot water and medical gas.
• Investigate and perform system outages.
• Maintain a clean and safe work area, equipment rooms, and shop areas.
• Mark, cut, and bend pipe to meet specifications by using a hacksaw, pipe cutter, or cutting machine.
• Perform all work following infection control procedures.
• Prepare the pipe for installation, such as cutting, threading, removing burrs, grooving, and bending.
• Record work orders and submit hours to the supervisor daily.

Skills on Resume: 

• Cost Estimation (Hard Skills)
• Pipe Fitting (Hard Skills)
• System Inspection (Hard Skills)
• Blueprint Reading (Hard Skills)
• System Outage (Hard Skills)
• Workplace Cleanliness (Soft Skills)
• Pipe Preparation (Hard Skills)
• Record Keeping (Soft Skills)

Job Summary: 

• Study and analyze blueprints and floor plans to understand the plumbing system and water supply system layout
• Navigate the assembly and installation of pipes and tubes without interfering with existing infrastructure
• Measure, cut and bend pipe material
• Assemble valves, fittings, tubes and water system appliances
• Install and maintain building water systems
• Troubleshoot and fix issues relating to water supply lines
• Repair and replace system issues such as clogged drains, faucet problems, broken drainage lines and so on
• Maintain current knowledge of state regulations affecting plumbing work

Skills on Resume: 

• Blueprint Analysis (Hard Skills)
• Pipe Installation (Hard Skills)
• Pipe Measurement (Hard Skills)
• System Assembly (Hard Skills)
• Water Maintenance (Hard Skills)
• Issue Troubleshooting (Hard Skills)
• System Repair (Hard Skills)
• Regulation Knowledge (Hard Skills)

Job Summary: 

• Installing, maintaining, and repairing potable, non-potable, and natural gas.
• Identifying maintenance risks on equipment.
• Diagnosing mechanical and piping faults for all aforementioned systems.
• Cleaning, adjusting, and repairing systems
• Performing emergency repairs safely, promptly, and efficiently.
• Providing technical direction and on-the-job training.
• Keeping daily logs and records of all maintenance functions.
• Ensuring compliance of vendors with site-specific safety rules and the Occupational Health and Safety Act.

Skills on Resume: 

• System Installation (Hard Skills)
• Risk Identification (Soft Skills)
• Fault Diagnosis (Hard Skills)
• System Repair (Hard Skills)
• Emergency Response (Soft Skills)
• Technical Training (Soft Skills)
• Maintenance Logging (Hard Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Installs new and repairs plumbing systems.
• Makes recommendations regarding the replacement or upgrade of systems.
• Plans and develops routine preventive maintenance schedules for systems.
• Responds to requests for service.
• Researches and estimates the time and materials needed and records time and materials used.
• Requests for needed tools, equipment, supplies, and materials to perform assigned tasks.
• Monitors the expenditure of supplies and controls the inventory of equipment and tools.
• Installs new equipment, piping, and fixtures.
• Obtains permits from regulatory agencies for the construction of new plumbing systems.
• Performs preventive maintenance and required testing on plumbing systems, including backflow preventers.

Skills on Resume: 

• System Installation (Hard Skills)
• System Upgrading (Hard Skills)
• Maintenance Planning (Soft Skills)
• Service Response (Soft Skills)
• Cost Estimation (Hard Skills)
• Inventory Management (Soft Skills)
• Equipment Installation (Hard Skills)
• Permit Acquisition (Hard Skills)

Job Summary: 

• Installs, repairs, renovates, and maintains plumbing fixtures, water and sewer lines, drainage, waste, and storm drain systems, swamp coolers, drinking fountains, wet pipe sprinkler systems, booster, recirculation pumps, cooling towers, boilers, and water heaters.
• Installs, repairs, adjusts, or replaces automatic sprinkler/irrigation systems to include electrical and mechanical devices.
• Conducts regular inspections of facilities to determine maintenance needs.
• Applies water management practices in buildings.
• Performs annual winterization and spring startup of irrigation systems, including sprinkler systems, irrigation and culinary water lines, pumps, and drinking fountains, evaporative coolers, and building systems.
• Operates and maintains equipment such as backhoes, trackhoes, and trenchers.
• Maintains an adequate inventory of supplies, materials, tools, and equipment to accomplish work assignments.
• Assists with the installation, maintenance, and monitoring of central irrigation control equipment.
• Assists other trades with maintenance and repairs, including snow removal and maintenance for County properties.
• Responds to emergencies during non-standard work hours.
• Reads, interprets, and works from sketches, diagrams, and blueprints
• Maintains an inventory of commonly used materials, supplies, and parts.
• Assists in other construction and remodel projects of county properties.

Skills on Resume: 

• Plumbing Maintenance (Hard Skills)
• Irrigation Repair (Hard Skills)
• Facility Inspection (Soft Skills)
• Water Management (Hard Skills)
• System Winterization (Hard Skills)
• Equipment Operation (Hard Skills)
• Inventory Control (Soft Skills)
• Blueprint Reading (Hard Skills)

Job Summary: 

• Install, maintain, and repair water closets, shower valves, drainage, plumbing fixtures, water heaters, gas appliances, and sump pumps for both commercial and residential customers.
• Perform backflow testing and gas testing (including cutting and threading gas pipe)
• Understand the company's pricing structure and generate appropriate customer invoices at the job site.
• Electronically process credit card payments.
• Obtain customer signature prior to and at completion of job.
• Obtain correct customer information, including cell phone number and email address.
• Document and take pictures of all installed equipment upon arrival, including make, model, serial number, necessary test measurements, and pictures.
• Diagnose service issues, obtain any replacement parts, calibrate the system to the manufacturer's recommendations, and explain fully to the customer the appropriate remedy.
• Participate in company-provided training opportunities on the latest industry technologies.

Skills on Resume: 

• Plumbing Repair (Hard Skills)
• Backflow Testing (Hard Skills)
• Gas Testing (Hard Skills)
• Invoice Processing (Soft Skills)
• Payment Handling (Soft Skills)
• Customer Communication (Soft Skills)
• Equipment Documentation (Hard Skills)
• System Calibration (Hard Skills)

Job Summary: 

• Determine sources of plumbing malfunctions and complete repairs as indicated or according to work orders.
• Install and repair pipes, fittings, valves, fixtures, and plumbing system equipment, including sinks, commodes, water heaters, water softeners, etc.
• Receive and complete work orders.
• Maintain accurate records on material and labor used.
• Maintain inventory of tools, equipment, and materials.
• Inspect jobs upon completion and ensure areas are clean.
• Respond to emergency calls
• Diagnose plumbing problems and perform repairs
• Install, assemble, maintain, and repair pipes and plumbing fixtures
• Locate and repair water line leaks and remove clogs

Skills on Resume: 

• Malfunction Diagnosis (Hard Skills)
• Pipe Installation (Hard Skills)
• Work Order (Soft Skills)
• Record Keeping (Soft Skills)
• Inventory Management (Soft Skills)
• Quality Inspection (Soft Skills)
• Emergency Response (Soft Skills)
• Leak Repair (Hard Skills)

Job Summary: 

• Perform preventative maintenance on plumbing systems and components, as well as fixtures and all types of lines and water heaters.
• Determine the best approach to solving tasks after carefully evaluating the work site to ensure safety for site occupants and/or facility users while the project is underway.
• Outline projects and work with minimal oversight.
• Review and inspect assigned tasks to adequately order required materials and supplies for the job.
• Read and interpret blueprints, schematics, diagrams, and written reference material outlining the scope of various projects.
• Install new equipment, including commodes, lavatories, sinks, water, gas, and sewer lines, piping, drains, grease traps, water heaters and pee-traps, and unstop plumbing components
• Record all materials and supplies used and man-hours accumulated on projects until the scope of work is accomplished to keep the foreman informed on total job costs.
• Provide ongoing guidance and on-the-job training for plumbing helpers.
• Serve on-call periodically for emergencies that occur at night, on weekends, and during holidays, and respond to pages and calls promptly.
• Practice a high standard of safety in the performance of all duties.
• Contribute to the prevention of accidents and injuries by observing safety rules and District policy, practicing the principles and skills taught in safety training, wearing personal protective equipment, reporting injuries and incidents immediately to a supervisor, and being proactive in the ongoing efforts to improve and maintain workplace safety.

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• Site Evaluation (Soft Skills)
• Project Planning (Soft Skills)
• Material Ordering (Hard Skills)
• Blueprint Reading (Hard Skills)
• Equipment Installation (Hard Skills)
• Job Reporting (Soft Skills)
• Staff Training (Soft Skills)

Job Summary: 

• Serve customers with a positive attitude, enthusiasm, and professionalism.
• Present options on every call and assist customers in making the best decision for their business.
• Refuse to Compromise Company or individual integrity by performing unnecessary services.
• Assist fellow employees whenever called upon to do so.
• Perform every job with technical excellence to live up to the industry-leading warranties and guarantees.
• Remain current on license, certifications, training, and safety requirements.
• Remain proficient in the tools and techniques of the craft and seek training and certifications to advance the career.
• Embrace a safety-first mentality both on and off the job.
• Promote the LCS image of being clean cut, trustworthy, and professional at all times with dignity and respect when dealing with the valued customers, vendors, and fellow employees.
• Complete required forms, reports, and approval processes using the provided tablets, computers, phone systems, and software.
• Maintain, inspect, and clean assigned vehicle and maintain and secure truck stock to promote time and material efficiency and present a professional image to the public.

Skills on Resume: 

• Customer Service (Soft Skills)
• Decision Support (Soft Skills)
• Integrity Maintenance (Soft Skills)
• Team Assistance (Soft Skills)
• Technical Excellence (Hard Skills)
• Continuous Learning (Soft Skills)
• Safety Awareness (Soft Skills)
• Professional Conduct (Soft Skills)

Job Summary: 

• Studies specifications, building plans and shop drawings to determine tools and equipment required and the appropriate sequence of installation.
• Follows hanger spacing and load requirements based on specs and owner requirements.
• Installs and repairs plumbing fixtures such as sinks, toilets, bathtubs, urinals, water heaters, water softeners and others.
• Locates and marks the position of pipe, pipe connections and passage holes for pipes in walls and floors using a ruler, a level, and a laser.
• Cuts openings in walls and floors to accommodate pipes and fittings, using hand and power tools.
• Installs sleeves and leaves out for roof and wall penetrations.
• Digs, backfills and tamps ditches using shovels, picks, and tampers.
• Cuts, reams and solders copper tubing/piping, braze, solvent weld, fuse groove and thread pipe using pipe cutters, reamers, torches, allow gaskets, solvent cements, fusing machines, press fittings, groove and pipe-threading machines.
• Assembles and installs valves, pipes and fittings composed of metals, i.e., iron, steel, copper, brass, lead and non-metals, i.e., glass, vitrified clay and plastic, using hand tools and power tools.
• Joins pipe using mechanical solder, brazing and pipe joining methods.
• Fills pipe systems with water or air and reads gauges to determine system leaks.
• Maintains the work area in a clean, orderly condition and follows prescribed safety regulations (should support implementation of 6S).
• Maintains required personal tools and properly uses all Personal Protection Equipment (PPE) and safety equipment.

Skills on Resume: 

• Blueprint Interpretation (Hard Skills)
• Fixture Installation (Hard Skills)
• Pipe Positioning (Hard Skills)
• Wall Cutting (Hard Skills)
• Pipe Assembly (Hard Skills)
• Leak Testing (Hard Skills)
• Workplace Cleanliness (Soft Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Coordinates with Dispatch and management team to ensure work orders are accurately received and attended to promptly based upon established goals and service standards.
• Diagnoses malfunctions of heating/air conditioning/systems and/or components in residential HVAC units for the purpose of identifying repair/replacement needs necessary to maintain equipment and systems.
• Install heating/air conditioning/refrigeration systems and related equipment and/or components (e.g., unit heaters, pumps, safety controls, valves, etc.) with the purpose of ensuring safe and efficient operation of equipment.
• Manage repair costs while minimizing inefficiencies.
• Achieve all first-time fixes, productivity, customer service and other performance goals consistently.
• Maintains tools, supplies and/or equipment (e.g., torches, cutters, drills, test equipment, filters, control components, fan blades, gaskets, seals, etc.) for the purpose of ensuring the availability of items and equipment is in safe operating condition.
• Manage and maintain appropriate inventory, ensuring availability of required parts and equipment on an ongoing basis.
• Repairs various items, systems and/or components (e.g., air conditioning systems, heating units, such as steam boilers, forced air, and hot air systems) for the purpose of providing renovation and preventive maintenance of heating/air conditioning and refrigeration systems.
• Requests equipment and supplies for the purpose of maintaining inventory and ensuring the availability of required items.
• Responds to emergencies for the purpose of resolving immediate safety concerns.
• Transports various items (e.g., tools, equipment, supplies, etc.) for the purpose of ensuring the availability of materials required at the job site.

Skills on Resume: 

• Work Coordination (Soft Skills)
• System Diagnosis (Hard Skills)
• HVAC Installation (Hard Skills)
• Cost Management (Soft Skills)
• Performance Achievement (Soft Skills)
• Tool Maintenance (Hard Skills)
• Inventory Management (Soft Skills)
• Emergency Response (Soft Skills)

Job Summary: 

• Report to and receive assignments, instructions, and directions from supervisors.
• Read and interpret instructions and documentation, and plans for work activities.
• Move materials and equipment to work locations and set up work sites.
• Assemble, install, and repair pipes, fittings, and fixtures of heating, water, and drainage systems in support of plant construction and maintenance activities.
• Repairs or replaces damaged plumbing fixtures such as sinks, toilets, showers, bathtubs, water heaters, electronic flush valves and faucets, and drinking fountains, or connects them to outlet and inlet pipes by making adjustments in pumps, regulators, and associated piping, threading, bending, or fusion welding pipe either by hand or by use of power equipment, screwing, bolting or fitting gaskets, couplings, traps and valves, and soldering, lead wiping, and/or acetylene cutting and welding connections to seal joints.
• Provides means of access to route pipes through walls, floors, and other structures as may be required by dismantling or cutting through structural and other physical barriers to gain access for repairs or for new installations.
• Protects property and equipment from damage during assigned work by removing furniture, wall fixtures, and equipment from work sites or covering immovable items with protective cloths, covering floors with cloths or tarpaulins, and erecting scaffolding or support structures in a manner that prevents damage.
• Install water heaters, heating equipment, fixtures, drainage, and piping systems in retrofit properties and construction projects
• Adhere to current code and regulations related to plumbing and natural gas so that systems pass inspection the first time
• Provide exemplary customer service to all clients

Skills on Resume: 

• Task Execution (Soft Skills)
• Blueprint Reading (Hard Skills)
• Site Preparation (Hard Skills)
• Pipe Installation (Hard Skills)
• Fixture Repair (Hard Skills)
• Access Creation (Hard Skills)
• Property Protection (Soft Skills)
• Customer Service (Soft Skills)

Job Summary: 

• Performs scheduled inspections, preventative and corrective maintenance, repairs, adjustments, testing, and troubleshooting of assigned plumbing equipment.
• Remove blockage from drain lines, both interior and exterior, floor drains, fan coil units, air handling units, stacks, vents, and storm drainage systems.
• Adjust, repair, or replace leaky pipes, faucets, and other outlets.
• Install, replace, maintain and/or repair domestic, industrial and commercial water heaters, storage tanks, plumbing fixtures, equipment, appliances and components, including commodes, urinals, kitchen and utility sinks, water fountains, cooling towers, grease traps, circulation system for heating and cooling systems, fan and air handler coils, valves, pumps, and associated equipment and components.
• Maintains records of activities, processes work orders and oral instructions using mobile platforms, diagrams, schematics, manuals, maps and schedules.
• Applies and adheres to applicable building code requirements.
• Assembles, installs and repairs plumbing and/or medgas systems according to project specifications and appropriate trade and building codes.
• Achieves company goals for safety, budget, job quality, and timely completion of each assigned project.

Skills on Resume: 

• Preventive Maintenance (Hard Skills)
• Drain Cleaning (Hard Skills)
• Leak Repair (Hard Skills)
• Equipment Installation (Hard Skills)
• Record Management (Soft Skills)
• Code Compliance (Hard Skills)
• System Assembly (Hard Skills)
• Project Execution (Soft Skills)

Job Summary: 

• Maintain a supply of soft water for all boilers, cooling towers, and water heaters.
• Replace and repair faulty parts, gaskets on showers, sinks, stools, tubs, and water fountains.
• Unplug stools, tubs, showers and sinks.
• Circulating pumps, sump pumps, water lines, backup systems, low pressure steam.
• Replace and repair faulty parts.
• Maintain plumbing in all campus restrooms.
• Replace and repair sprinklers on campus, repair above and underground pipes, drains, and faucets.
• Complete all necessary plumbing work involved in commercial and institutional construction.
• Manage all projects to meet the high-quality standards required by the company.
• Maintain excellent relationships with owners and employees.
• Ensure that strict safety standards are followed at all times.

Skills on Resume: 

• Water Maintenance (Hard Skills)
• Part Replacement (Hard Skills)
• Drain Unclogging (Hard Skills)
• Pump Maintenance (Hard Skills)
• Restroom Plumbing (Hard Skills)
• Sprinkler Repair (Hard Skills)
• Project Management (Soft Skills)
• Safety Compliance (Soft Skills)

Job Summary: 

• Technical leadership and oversight of and production of plumbing system drawings and specifications throughout the project's design and construction phases.
• Create spools for Pre-Fab and in-field implementation.
• Client interface and coordination with consultants and local authorities.
• Provide supervision/direction to supporting designers/drafters.
• Collaborate with all disciplines internally as well as coordinate with design team members, facility personnel, and local authorities.
• Find the best solution for the customer, and provide flat-rate estimates for repairs
• Follow health and safety regulations
• Perform inspections of plumbing systems and be able to fix any problems
• Cut and assemble pipes with knowledge of existing infrastructure
• Perform basic residential and commercial plumbing repairs as well as water heater replacements, repipes, drain stoppages, sewer line replacements, and other plumbing services.
• Rough and finish plumbing work for residential kitchen and bathroom renovation projects
• Plan and execute the demolition, relocation of plumbing for residential kitchen and bathroom projects, including waste and supply lines for kitchen and bathroom sinks, gas lines, toilets, showers, and bathtubs
• Adhere to standards for site safety, work site protection, and cleanliness

Skills on Resume: 

• Technical Oversight (Hard Skills)
• Drawing Production (Hard Skills)
• Client Coordination (Soft Skills)
• Team Supervision (Soft Skills)
• Design Collaboration (Soft Skills)
• Problem Solving (Soft Skills)
• System Inspection (Hard Skills)
• Site Safety (Soft Skills)

Job Summary: 

• Repair or install general plumbing components, including faucets, toilets, flush valves, sinks, drains, hose bibs, water heaters, domestic water heaters, garbage disposals, and backflow device valves.
• Installs, repairs, or replaces domestic hot and cold-water lines.
• Respond to emergency plumbing calls such as clogged drains, broken water lines, and frozen pipes.
• Repairs/replaces domestic hot water heat pumps, chilled water pumps, sump pumps, and sewage pumps.
• Repairs steam, water, and gas distribution systems.
• Recommend repair needs to potentially eliminate ongoing and future repairs.
• Install, maintain, test, and repair plumbing and HVAC mechanical systems, related piping systems, control valves and controls, and all other related equipment, in accordance with plumbing and HVAC codes.
• Make necessary adjustments and calibration of related devices
• Estimate time and material jobs
• Maintain customer satisfaction and exceed customers’ expectations
• Perform field inspections during various stages of construction
• Review plans and specifications for commercial, industrial, and residential projects to ensure compliance with city, state, and federal laws and regulations
• Perform Rental Housing inspections in accordance with municipal ordinances and regulations
• Report violations and maintain files/records

Skills on Resume: 

• Plumbing Repair (Hard Skills)
• Emergency Response (Soft Skills)
• Pump Maintenance (Hard Skills)
• System Calibration (Hard Skills)
• Code Compliance (Hard Skills)
• Cost Estimation (Hard Skills)
• Customer Satisfaction (Soft Skills)
• Field Inspection (Hard Skills)

Job Summary: 

• Reading and interpreting blueprints to assess or plan plumbing installations and layouts
• Cutting, welding, and assembling pipes, tubes, fittings, and fixtures
• Inspecting and testing plumbing systems for safety, functionality, and code compliance
• Order the appropriate amount and type of material
• Inspect the work of less experienced workers
• Assembly of PVC, Cast Iron, Copper, Screw Pipe, and Gas Pipe and fittings using couplings, pro press, grooved, fused, clamps, bolts, screws, plastic solvent, soldering and brazing.
• Piping systems include Domestic Water, Sanitary Waste and Vent, Storm, Natural Gas, Acid Waste, and Condensate systems.
• Understand the installation of piping systems according to the contract drawings, shop drawings, and details.
• Keeps work area clean and in an orderly condition.
• Follows all company and jobsite/OSHA safety regulations.
• Perform thorough preventative maintenance on large commercial units and industrial units.
• Operate and maintain large motors up to 500hp and pumps, electric pumping units and auxiliary equipment.
• Process quality control requirements and remedial measures in dealing with process malfunctions and emergencies.
• Maintain wastewater treatment and pumping plant equipment
• Perform physical and chemical tests related to treatment plant control

Skills on Resume: 

• Blueprint Reading (Hard Skills)
• Pipe Assembly (Hard Skills)
• System Inspection (Hard Skills)
• Material Ordering (Soft Skills)
• Work Supervision (Soft Skills)
• System Installation (Hard Skills)
• Safety Compliance (Soft Skills)
• Equipment Maintenance (Hard Skills)

Job Summary: 

• Diagnose and perform residential plumbing services
• Diagnose and resolve customer problems in a courteous, professional, timely, and accurate manner
• Serves clients to the highest level possible
• Completes all paperwork in a timely and accurate manner
• Collects payment from the customer
• Communicates with dispatch while working to ensure the dispatcher has an accurate status report of activities and availability
• Ensures company property, vehicles, and tools are being maintained and properly accounted for
• Perform scheduled maintenance service on plumbing systems and fixtures
• Apply all codes to installations, repair, and maintenance
• Ensure all requirements as specified by the manufacturer of systems and fixtures are met
• Ensure all installations, repairs, and maintenance are properly sized, aligned, supported graded
• Ensure all installations, repairs, and maintenance meet the requirements of the appropriate codes
• Ensure all installations, repairs, and maintenance meet environmental protection requirements

Skills on Resume: 

• Plumbing Diagnosis (Hard Skills)
• Customer Service (Soft Skills)
• Problem Resolution (Soft Skills)
• Documentation Accuracy (Soft Skills)
• Payment Collection (Soft Skills)
• Status Communication (Soft Skills)
• Property Maintenance (Soft Skills)
• Code Compliance (Hard Skills)