• Maintains shelf life of consumables and disposables in one's area. 
• Changing IV sets, calibrated IV test sets, products, labels, cleaners, etc.
• Responsible for Technical Assistance to any employee, customer, or department to the best of one's ability
• Keep up on OEM testing standards, issues, and news for medical equipment services
• ISO compliance including complying with ISO standards, and participating in internal and external audits
• Researching and building testing systems for testing of EBS parts
• Creating PM sheets for testing systems and medical equipment to be repaired and/or tested
• Search and quote parts for systems mentioned, parts for board harvesting and software
• Responsible for all tools and test equipment used in the servicing of medical equipment and ensuring any calibration issues or problems

Skills: Inventory Management, Medical Equipment, Customer Service, Industry Standards, Research, System Testing, Procurement, Equipment Maintenance

• Maintain established department policies, procedures, objectives
• Improving organization performance program, infection control, and safety standards
• Install, calibrate, and maintain various medical equipment
• Make necessary operational adjustments to electronic equipment and take sensitivity, selectivity, and accuracy measurements
• Analyze electronic equipment for causes of failure, isolate, test, and replace defective parts
• Design or select machine components for machines already designed or in the design process
• Design and construct cables, adapters, and other interface equipment
• Perform preventative maintenance and electrical safety testing and correct problems encountered
• Assist with care and maintenance of department equipment and supplies
• Maintaining department records, reports, and files
• Participate in educational programs and in-service meetings, and attend meetings 

Skills: Procedure Management, Safety Standards, Medical Equipment, Operational Adjustments, Troubleshooting, Machine Component, Equipment Construction, Preventative Maintenance

• Perform major and minor repairs on equipment 
• Apply good problem-solving skills in a variety of situations.
• Perform incoming inspections, cleaning, unscheduled maintenance, and calibration.
• Perform and complete preventive maintenance assignments following the Medical Equipment Management Plan.
• Inspect preventive maintenance stickers in assigned areas.
• Provide part number identification, verification, and other support on Getinge products for internal and external Getinge customers
• Utilize SAP to open service orders and make changes as well as any required complaint handling.
• Keep Technical Documentation up to date for all products.
• Maintains all regulated medical waste manifests, logs and MSDS.
• Conducts annual water training for new hires and all direct patient care staff.
• Partner with other groups and departments to provide seamless and professional customer support to both internal and external customers.

Skills: Equipment Repair, Problem-Solving, Calibration, Preventive Maintenance, Technical Documentation, Regulatory Compliance, SAP Proficiency, Customer Support

• Maintain machines and equipment in conformance with manufacturer's guidelines 
• Makes necessary repairs for clinic and inpatient programs with appropriate documentation according to industry standards.
• Performs and documents disinfections and cleanings on water treatment equipment per manufacturer's directions for use.
• Responsible for maintaining an adequate inventory of supplies. 
• Ensure that necessary documentation, i.e. purchase orders and packing slips are submitted to appropriate individuals on time.
• Collects necessary water samples per AAMI standards, and trends
• Reviews and interprets results, notifies Regional Biomed, Clinic Manager, or designee and Medical Director of problematic results
• Responsible for reporting these findings in quality assurance meetings.
• Oversees and evaluates the water system through analysis and direct measurement of operating parameters.
• Responsible for troubleshooting mechanical problems with machines and equipment.
• Performs monthly inspection and documentation to include physical plant and grounds, an inspection of center safety devices

Skills: Equipment Maintenance, Disinfection, Inventory Management, Water Sampling, Quality Assurance, Troubleshooting, Problem Solving, Operational Analysis

• Evaluate basic customer medical equipment issues and needs, and implement appropriate repairs and/or service.
• Perform preventative maintenance, safety, electrical, environmental, and new equipment inspections on medical equipment.
• Be available on a basis to respond to emergency service requests made outside of regular working hours.
• Work overtime and travel long distances with overnight stays with little to no notice.
• Effectively communicate and partner with teammates and colleagues to complete assignments in a professional and timely manner.
• Participate in the department’s after-hours rotating call schedule.
• Perform repairs of medical equipment using manufacturer’s recommendations, test procedures, diagnostics, and accepted engineering standards
• Comprehends medical electronic equipment and systems to a high degree.
• Perform performance inspections and safety and repair maintenance on basic/complex medical equipment following manufacturer’s and departmental standards and procedures.
• Analyze data from inspections, performance tests, periodic maintenance, and major/minor repairs of complex medical equipment for the preparation of appropriate documentation.

Skills: Medical Equipment, Preventative Maintenance, Emergency Response, Communication, Technical Expertise, Safety Inspections, Data Analysis, Documentation

• Troubleshoot and accurately diagnose problems with medical equipment
• Disassemble, repair to component, module, or assembly level, reassemble and final test of medical equipment serviced
• Preventative Maintenance of medical equipment and accurate reporting/record keeping of PMs
• Understand the proper use of test equipment, special gauges, tools, and software used in the repair or PM of medical equipment
• Report weekly time spent or quantity on non-repairs the BMET works on or is tasked with to the Director of Customer Support
• Accurately updated Automated Service Records in Sage including dates, lot numbers/serial numbers of parts used status updates, and parts billed out on repairs. 
• Maintains inventory at depot repair locations assigned to.
• Acts as quality control technician in testing components by Product Development, Production Manager, and/or Quality Director, and report findings to same.

Skills: Troubleshooting, Advanced Repair, Preventative Maintenance, Test Equipment, Task Reporting, Service Record, Inventory Management, Quality Control

• Working experience in Electronics, Biomedical Engineering, or a related field.
• Experience in Biomedical Electronics service as a technician or field engineer.
• Must have excellent mechanical and troubleshooting skills.
• Good interpersonal and verbal/written communication skills.
• Have the certification by the International Certification Commission.
• Experience in the repair/maintenance of medical equipment.
• Working experience in the Electronic or Computer Engineering field.
• Experience using test equipment such as analyzers and simulators.
• Substantial understanding of the job and applying that knowledge and skill in a wide range of tasks.
• Practical knowledge or experience with various respiratory therapy equipment and ventilators
• Ability to work with minimal instruction on daily tasks and require only general instructions on newly introduced assignments.

Qualifications: BS in Biomedical Engineering with 3 years of Experience

• A moderate level of knowledge and skills involving mechanical, electrical, hydraulic, pneumatic, and electronic equipment and components
• The ability to independently perform work ranging from minor repairs and adjustments to new installation. 
• Knowledge of various trades including mechanical, electrical, steam, refrigeration, plumbing and welding, and of all pertinent safety practices. 
• Able to determine the nature and extent of repairs necessary, materials and parts needed
• The ability to plan and layout work using work orders, sketches, blueprints, technical manuals, and other specifications
• Must be able to use a variety of power and hand tools, and skilled in the use of test equipment. 
• Must be capable of performing repairs to mechanical equipment such as sterilizers, centrifuges, labware washers, necropsy equipment, etc.
• Knowledge of and ability to select proper replacement parts, and modification kits
• The ability to identify materials, mechanisms, and components 
• Knowledge of diagram symbols, color code descriptions, and manufacturer's numbers.

Qualifications: BS in Electrical Engineering with 5 years of Experience

• Electronics or equivalent training and/or work experience.
• Skill in utilizing electrical test equipment such as ohmmeters, and test meters
• Skill in utilizing seat wrenches and end pressure gauges when working on hydraulic systems.
• Excellent organizational skills as well as good communication, interpersonal, and customer relations skills
• Experience in performing initial inspections, calibrations, diagnostics, general maintenance, and repair of medical and general support equipment
• Skill in utilizing electronic test equipment such as multimeters, oscilloscopes, signal generators, and electrical safety analyzers
• Skill in utilizing equipment such as micrometers and calipers to detect wear and misalignment of gears, cams, valves, and other mechanical parts
• Ability to interpret and apply blueprints, schematic drawings, wiring diagrams, liquid, and airflow sheets, technical manuals, and other specifications 
• Ability to make mathematical computations, using algebraic expressions and shop formulas relating to load requirements of wiring and equipment.
• Knowledge of using the Defense Medical Logistics Supply Support system to manage and record all equipment maintenance requirements and actions.

Qualifications: BS in Mechanical Engineering with 2 years of Experience

• Experience working in a Biomedical program.
• Electronics equipment or electrical working experience.
• Experience in Electrical Engineering, Biomedical Engineering, or Mechanical Engineering
• Working experience servicing medical equipment, electrical, or mechanical equipment.
• Knowledge of safety regulations, anatomy, physiology, and medical terminology.
• Strong attention to detail and the ability to remain focused in a busy/distracting setting. 
• Be detail-oriented with time management skills, and the ability to multitask and prioritize.
• The ability to use test equipment, gauges and meters commonly associated with the service of medical equipment.
• The ability to read, understand, and interpret technical documentation including wiring and equipment schematics.
• Experience in an environment that pertains to installing, maintaining, and repairing medical, electronic and/or mechanical equipment

Qualifications: BS in Medical Technology with 4 years of Experience

• Experience repairing, maintaining and calibrating medical devices independently
• Working experience in a hospital or healthcare setting
• Ability to make decisions regarding troubleshooting and repairing medical devices
• Excellent communication, customer service and time management skills
• Strong leadership capabilities to be client-facing and train other BMET
• Specific experience with the following medical devices or equipment
• Working experience in general biomedical and training with anesthesia and ventilators.
• Understanding of Fundamentals of Dicom and Networking.
• Experience with electronic circuit boards, processors and computer hardware including applications, programming and systems functionally.
• Have PC competency including the basic knowledge of word processing, spreadsheets, and databases.
• Potential exposure to hazardous physical, chemical, and biological agents.

Qualifications: BS in Electronics Engineering Technology with 6 years of Experience

• A basic understanding of human anatomy and physiology 
• Demonstrate a basic understanding of medical terminology.
• Working experience in the direct medical equipment service.
• Experience in electronics or Biomedical Engineering and/or CBET certification
• Experience servicing medical equipment with Sterilizers, Ventilators, and Anesthesia equipment.
• Experience with mechanical devices tools and test equipment.
• Possess demonstrated skills in using an oscilloscope, digital multimeter, etc.
• The ability of basic computer skills and experience with Microsoft Office applications.
• Expert-level knowledge and skills in the specialized medical technology device types. 
• Practical knowledge or experience with networked physiological monitoring systems, specialized medical laboratory equipment
• Practical knowledge or experience with highly specialized surgical systems, x-ray systems, or medical device security.
• Must have CBET (Certified Biomedical Equipment Technician) or CLES (Certified Laboratory Equipment Specialist).

Qualifications: BS in Health Sciences with 5 years of Experience